Haier HDW15F2S1, HDW15F2B1 dishwasher User Manual
Below you will find brief information for dishwasher HDW15F2S1, dishwasher HDW15F2B1. This user manual provides information on how to install, use, and maintain your dishwasher for optimal performance and safety. It covers topics such as loading the baskets, selecting the appropriate wash program, using detergent and rinse aid, troubleshooting common issues, and performing regular cleaning and maintenance.
Advertisement
Advertisement
User Manual
Dishwasher
HDW15F2S1 HDW15F2B1
NZ AU
1
Thank you
NZ AU
Please read these instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance.
Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance.
If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass on this manual so that the new owner can become familiar with the appliance and safety warnings.
Legend
General information and tips
Warning–Important Safety information
Environmental information
Disposal
Help protect the environment and human health. Put the packaging in applicable containers to recycle it. Help to recycle waste of elec- trical and electronic appliances. Do not dispose appliances marked with this symbol with the household waste.
Return the product to your local recycling facility or contact your municipal office.
WARNING!
Risk of injury or suffocation!
Disconnect the appliance from the mains supply. Cut off the mains cableand dispose of it. Remove the door catch to prevent children and pets to get closed in the appliance.
NZ AU
Content
Safety .....................................................................................................................
3
Installation ............................................................................................................
5
Technical Data .....................................................................................................10
Product Description ..........................................................................................
11
Control Panel ......................................................................................................
12
Programme ..........................................................................................................
15
Before first use ...................................................................................................
16
Daily Use ..............................................................................................................
21
Wi-Fi Connection ...........................................................................................
.
...
28
Care and Cleaning ..............................................................................................
29
Troubleshooting .................................................................................................
31
Standards Test ..... ...............................................................................................
34
2
Safety
NZ AU
Intended Use
The appliance is designed for domestic use inside the house ， or in similar applications such as staff kitchen areas in working environments, farm houses, by clients in hotels, motels or other residential environments, and bed and breakfast environments.It is not intended for commercial or industrial use. Do not use it for purposes other than that for which it was designed.
Changes or modifications to the device are not allowed. Unintended use may cause hazards and loss of warranty claims.
Standards and Directives
This product meets the requirements of all applicable EC directives with the corresponding harmonised standards, which provide for CE marking.
3
Before Switching on the Appliance for the First Time
Do…
make sure all packaging is removed and is kept out of children’s reach.
make sure that the electrical information on the rating plate agrees
with the power supply. If it does not, contact an electrician.
use a separate earthed socket for the power supply. The appliance must be earthed.
make sure the plug is easy accessible.
make sure only the delivered electric cable and hose set are used.
hold the plug and not the electric cable when unplugging the power supply.
make sure not to damage the electric cable and the plug. If dam aged, have it replaced by an electrician.
make sure the hose joints and connections are firm and there is no leakage.
Do not…
install or use the appliance where the temperature is below 5 °C. use multi-plug adapters and extension cables.
let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge use the appli-
ance if not supervised by a person responsible for their safety.
put flammable products or items that are wet with flammable products in, near, or on theappliance.
NZ AU
Safety
During Daily Use
Do…
supervise children to prevent them playing with the appliance.
put sharp pointed objects (e.g. knives) in a way that there is no danger of injury.
Do not…
open the door while a programme operates. The appliance can release hot steam.
keep the appliance door open without supervision to prevent tripping
and falling.
let children or pets come close to the appliance when the door is open.
sit or place heavy items on the open door.
remove the dishes from the appliance until the programme is completed.
There can still be detergent on the dishes.
drink the water in the appliance. The water may be contaminated with detergent residues.
cover any ventilation openings in the base by a carpet or similar object.
use water spray or steam to clean the appliance.
let the children make the cleaning and user maintenance without
supervision.
WARNING:
Some dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with the skin and eyes and keep children away from the dishwasher when the door is open.Check that the detergent receptacle is empty after completion of the wash cycle.
- The door is not left in the open position since this could present a
tripping hazard.
- Warning: Knives and other utensils with sharp points must be loaded in
the basket with their points down or placed in a horizontal position.
- Only use hose-set provided by manufacture, old hose-set cannot be reused.
4
Installation
NZ AU
WARNING!
Any installation may be carried out only by a qualitied technician refer to section SAFETY.
Free Standing Installation
Install the appliance on solid ground.
Adjust accurately all feet to get a firm, horizontal position.
Only with a correct level the appliance door closes and seals correctly.
5
Installation under Worktop
1.
2.
Optional:Remove the work top of the appliance.
Adjust accurately all feet to get a firm level position.
3.
Stick the water-proof sticker on the bottom of the countertop .
4.
Install the appliance carefully into the recess.
570
598 min580 min
600
WARNING!
If used as free standing appliance again, the worktop must be remounted.
5.
The dimensions of the recess should at least agree with the dimensions in
6 .
.
After installation, the minmum gap between the side planel and the cupboard is 1mm, and the minmum gap between the rear and the cupboard is 10mm. The top gap is controlled by adjusting the feet.
7 . Put the appliance adjacent to the slot. Make sure that all connections
(water, drain water, power) are neatly positioned and connected.
NZ AU
Installation
Fresh Water Connection
>10mm
IMPORTANT!
The appliance should be connected to the water main using the new water inlet hose supplied. Old hoses should not be used.
Do not shorten the inlet hose.
fig.A
1. Take note of water connection requirements.
The dishwasher has a single valve water connection.
We recommend a cold water connection for best performance and energy efficiency.
The incoming water temperature should not exceed 25°C.
2. Take note of the permitted water pressure extremes.
Lowest: 0.3 bar = 3 N/cm = 30kPa
Where pressure is below 1 bar, contact a qualified plumber.
Highest: 10 bar = 100 N/cm = 1MPa
Where pressure is above 10 bar, a pressure reduction valve
must be installed. Contact a qualified plumber.
3. Connect the water inlet hose to an accessible water tap with
a 3/4” BSP connector (see fig.A). Ensure that there is no kink in
the inlet hose that could restrict the flow of water. A 90° bend
requires a minimum height of 200 mm for a kink-free curve.
Ensure incoming water is clear. If the water pipes have not
been used for a long period of time, let the water run to make
sure it is clear with no impurities. Not doing so may result in
the water inlet hose getting blocked and damaging the appliance.
If required, use a filter insert to filter out deposits from the
piping. The filter insert is available from your Authorised
Service Centre or Customer Care.
4. Tighten the hose coupling a further half turn after seal contact.
5. Check that the connection does not leak.
6
Installation
NZ AU
Drain Water Connection
Fix the water drain hose properly to the piping.The hose has to reach at one point a height between 400 and 850 mm above the appliance bottom line .
An extension hose for the water drain hose must not exceed a total length of 4 m and must have the same diameter as the water drain hose.
Following connections are possible:
Drain hose to sink
Hang the drain hose with the
U-support over the edge of a sink with adequate size.
Protect the U-support sufficiently against slipping.
Drain hose to waste water connection
The internal diameter of the stand pipe with vent-hole must be minimum 40 mm.
Put the drain hose for approx.80 mm in the wastewater pipe.
Attach the U-support and secure it sufficiently
7
Drain hose to sink connection
When connecting the drain hose to a sink trap with a drain hose spigot, make sure that the drain hose is supported to the height of the bench.
Ensure the drain spigot has a minimum hole diameter of 15 mm and it has been drilled out.
NZ AU
Power connection
Installation
As shown in the figure, the power supply is plugged into an externally accessible place through the service hole for easy plugging.
CAUTION!
Ensure always that all connections (power supply, drain and fresh water hose) are firm, dry and leak free.
Take care these parts are never to be crushed, kinked, or twisted
If the supply cord is damaged, it must be replaced by the service agent (see warranty card) in order to avoid a hazard.
8
Installation
Service hole
NZ AU
9
C
B FLOOR
PROFILE
A
REAR
WALL
Service hole dimensions
A
B
Maximum distance between rear of cavity and service hole *
Maximum distance between floor and service hole **
C Minimum diameter of service hole
* based on a cabinetry depth of 580mm.
** depending on adjustment of levelling feet.
MM
15
0-50
70
NZ AU
Technical Data
Check the electrical data on the rating label (located on the left-hand side of the dishwasher’s stainless steel inner door). Should the data on the rating label be different to those specified below, consider those on the rating label as correct.
Suppliers name or trade mark
Supplier´s model identifier
Rated capacity in standard place settings
Mainswater pressure
Haier
HDW15F2S1 HDW15F2B1
15
0.03 -1Mpa （ =0.3 -10bar ）
Power voltage
Maximum current int ensity
Total abso rbed p ower
220-240 V (50Hz)
10 A
1720-2050 W
10
Product Description
1
5
2
NZ AU
3
4
1.
Upper basket
2.
Upper spray arm
3.
Lower spray arm
4.
Lower basket
5.
Cutlery basket
6 7 8 9
6.
control panel
7.
Detergent dispenser
8.
Rinse aid dispenser
9.
Filters
Accessories
Check the accessories and literature in accordance with this list:
11 water inlet hose U-support Warranty card User manual water-proof sticker
NZ AU
1 2 3 8
Control Panel
3 6 7
9 5 4
1.
ON / OFF button
2.
PROGRAMME SELECT button
3.
Programme indicators
4.
Status indication
5.
Option indication
6.
START DELAY button
7.
START / PAUSE button
8.
9.
10.
Time & Info Display/Indicator
Modifier button
Remote button icon
5 10
Time & Info display
During any selection the display shows by flashing related information like
Programme cycle time
Programme start delay time
Error codes and service information
After start of an operation it dispalys without flashing
Remaining time in hours of a delayed programme starts, e.g.
Remaining programme cycle time in hours + minutes, e.g.
While running it may vary due to local conditions and daily working load.
12
Control Panel
NZ AU
Indicator Icon
Rinse aid
Water tap
Wi-Fi
Delay
Wi-Fi
Child Lock
Status Indicators
If the indicator lights up: Rinse aid is empty!
After adding Rinse Aid,the indicator lights off.
If the indicator lights up, The appliance does not fill with water.Check section:“TROUBLE SHOOTING”
If the indicator lights up, the dishwasher is successfully connected to the Wi-Fi.
If the indicator lights up, a delay start has been activated.
The indicator lights up , the phone App can control the dishwasher.
If the indictor lights up:Child lock mode has been activated.
Wash
Rinse
Dry
If the indicator is flashing: the Dishwasher is washing.
If the indicator is flashing: the Dishwasher is rinsing.
If the indicator is flashing: the Dishwasher is drying.
Optional function
Child Lock
Remote *
Half load
To activate or cancel Child lock, hold and until the Child lock indicator turn on or turn off.
Press the icon, and the app can start the dishwasher program.
Use this option if you have only a few items to wash.
This will save water, energy and time. If you use powder detergent use a little less detergent than for a full load.
13
NZ AU
Control Panel
Delay start
Dry+
Hygiene
Intensive+
You can delay the start of a programme in 1 hour steps up to 24 hours. Check the according paragraph under“Daily use”.
In the last stage of rinsing, the washing temperature is increased and the drying time is prolonged to enhance the drying effect of tableware.
This function increases the temperatures and retains them for an extra long time to obtain a defined disinfection performance. Continuous use of this function increases the hygiene status.
Prolong washing time and enhance washing effect.
* When the WiFi is connected, press the "remote" button and the remote icon on the nixie tube lights up: the app on the mobile can control the washing program. When the remote icon is on, press the remote button to cancel the remote function.
Wash programa
Auto
Heavy
Medium
60min
Eco
Glass
Modifier avaiable
Dry+
Hygiene ， Dry+ ， Intensive + ， 1/2load
Hygiene ， Dry+ ， Intensive + ， 1/2load
Dry+ ， Intensive +
/
， 1/2load
Dry+ ， 1/2load
14
Programme
NZ AU
Programme
1)
2)
Type of food residue
Light to heavy soil:
Casseroles,sauces, potatoes ， pasta, rice ， roasted or fried food
Heavy soil:
Casseroles, sauces, potatoes , pasta, rice, roasted or fried food
Daily soil:
Soups, eggs, sauces, potatoes, pasta, rice, roasted or fried food
Mixed soil:
Coffee, cake, milk, cold drinks, salad, sausages, pasta, roasted or fried food
Normal soil:
Soups , eggs, sauces, potatoes, pasta, rice, roasted or fried food
Light soil:
Coffee, cake, milk, cold drinks, salad, sausages
Type of load
Non-delicate:
Dinnerware, cutlery ， pots and pans
Non-delicate:
Dinnerware, cutlery ， pots and pans
Non-delicate:
Dinnerware ， cutlery ， pots and pans
Non-delicate:
Dinnerware ， cutlery ， pots and pans
Non-delicate:
Dinnerware ， cutlery, glassware
Delicate:
Glassware, dinnerware, cutlery
1). The appliance senses the type of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity of water, energy consumption and programme duration.
2). With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
15
NZ AU
Before first use
First Steps
Remove all packaging materials, keep them out of children’s reach and dispose them in an environmentally friendly manner.There could be water residue inside the appliance due to quality checks in the factory.
Perform in the following steps:
1. Install the appliance.
Refer to section INSTALLATION.
2. Only for use of Multitabs: Adjust the rinse aid setting.
Refer to section DIFFERENT SETTINGS FOR RINSE AID.
3. Fill the rinse aid dispenser.
Refer to section HOW TO FILL THE RINSE AID DISPENSER.
4. Open the water tap.
5. Start any wash programme (apart from Rinse programme ）
with detergent but no load to remove possible manufacturing residues.
Activate / De-Activate the Buzzer
An accoustic signal informs about the end of a programme.This signal can be switched off.
Refer to section HOW TO ADJUST SETTINGS and select the setting:
If the display shows the signal is switched off.
If the display shows the signal is switched on.
Different Settings for Rinse Aid
Rinse aid is added during the last rinsing phase to dry the dishes without streaks and stains.
Detergent (e.g. powder, tablets, ...) requires separate rinse aid:
Factory default setting: .No settings are necessary.
The rinse aid is added from the rinse aid dispenser only.
16
17
Before first use
NZ AU
Detergent with multifunction (e.g. Multitabs)
combine detergent and rinse aid:
The rinse aid setting should be adjust to . Please use the setting instructions in section HOW TO ADJUST SETTINGS and select the setting.
The rinse aid is added from the rinse aid dispenser in addition to the multitabs rinse aid.
Setting cuts off the rinse aid dosage and the rinse aid indication.
The higher the value for the higher the dosage.
Usually the recommended setting performs well. In case of streaks, stains, shimmer etc.
， refer to section TROUBLESHOOTING.
How to fill the Rinse Aid Dispenser
CAUTION!
Only use rinse aid for dishwashers.
Other products can cause damage to the appliance.
Lift the cover open and pour rinse aid into the opening.
Do not fill exceeding the MAX line.
Take care not to spill any onto the door or detergent bucket.
Close the cover, ensuring it clicks shut.
NZ AU
Before first use
Powder detergent quantity recommendations
Use the table below to determine the optimal powder detergent quantity for each wash programme.
If the water is hard in your area, more detergent may be required.
Refer to 'Water Hardness' for more details.
WASH
PROGRAM
PRE WASH
COMPARTMENT
MAIN WASH
COMPARTMENT
Auto
Heavy
Medium
Eco
60Min
None
Full
Full
Full
Full
1/2 - 2/3
2/3
2/3
2/3
1/2
Glass Full 2/3
18
19
Before first use
NZ AU
How to Adjust Settings
Adjust the Rinse Aid level
1. The appliance is switched on.
2. Press and hold about 3 seconds until:
The display shows the current Rinse Aid setting (the default is ).
3. Press to change the Rinse Aid setting in steps between
(minimum dispense,no rinse aid is set) and (maximum dispense, represents putting in 6ml rinse aid).
4. Press to save the option.
5. To exit the Rinse Aid menu, press and hold
Activate / De-Activate the Buzzer for 1 second.
1. The appliance is switched on.
2. Press and hold for about 3 seconds until :
The display shows the current Rinse Aid setting.
3. Press to scroll to the buzzer menu.
4. The display will show (buzzer off) or (buzzer on).
5. Press
6. Press to save the option .
7. To exit ， press and hold 1 second .
Child lock
This feature disables all the buttons on the dishwasher. If any other buttons are pressed while Child lock is activated, the Child lock indicator will flash for a few seconds.
1. To activate Child lock, press and for 3 seconds.
2. The display will remain on (if no programme has been started it will continue to flash while the control panel is locked).
3. To cancel Child lock, press and for 3 seconds.
NZ AU
Before first use
Dishwasher operation
1. Load the baskets.
2. Press the ON/OFF button to activate the appliance.
If the rinse aid indicator is on, fill the rinse aid dispenser and reset
the rinse aid indicator ，
AID IDNICATOR.
3. Add the detergent; refer to section DETERGENT.
4. Close the door.
5. Set the programme according to the type of load and how dirty the
dishes, cups and cutlery are.
6. Maybe select a start delay time.
7. Press the START / PAUSE button to start the programme.
8. After programme end the appliance change to auto off. Unload the
baskets.
How to Reset Rinse Aid Indicator
The rinse aid indicator is on:
1. Always completely fill the rinse aid before starting the next wash cycle.
2. After adding Rinse Aid,the indicator lights off.
20
Daily Use
NZ AU
Load the Baskets
With delicate glasses and porcelain make sure they are labelled
dishwasher-proof.
Do not put in the appliance items made of wood, horn, aluminium, pewter and copper.
Do not put in the appliance items that can absorb water (sponges, household cloths).
Only use the appliance to wash items that are dishwasher-safe.
Remove remaining food from the items.
Soften burned food on the items before washing.
Put hollow items (cups, glasses and pans) with the opening down.
Put items with deep hollows in a slanted position.
Mix spoons with other cutlery to prevent them to bond together.
Make sure that cutlery and dishes do not bond together and there is a gap between each item.
Make sure that glasses do not touch other glasses.
Put small items in the cutlery basket.
Put light items in the upper basket. Make sure that the items do not move.
Make sure that the spray arms can move freely before you start a programme.
If jingling noises are heard during a programme run: Check that the dishes and glassware have a firm position.
Place heavily soiled items (like pots and pans or dinner plates) in the bottom basket. The more powerful spray jet provides a better dishwashing result.
21
NZ AU
Daily Use
Upper baskets
The upper basket is designed
The upper basket is designed to hold items like glasses,cups, saucers, plates, small bowls and shallow pans.
You can adjust the height of the upper basket to create
Adjusting the height of the upper basket
Adjust the height of the upper basket to make space for taller items. You
Place small items on the foldable cup holder.
1
2
3
High position
When the middle shelf slide is in the
IMPORTANT!
Place sharp and pointed items
Low position downward into the knife rack, to keepthem out of harm’s
Foldaway cup racks
Adjust the height to suit or fold out of the way to make space for other items. Use the notches to support wine glass stems.
To adjust height
1. Fold up to unlock.
2. Adjust the height to suit by sliding up or down.
3. Fold back down to lock in position.
22
Daily Use
Lower basket
NZ AU
►
►
►
►
Place the largest items here: pots, pans, lids, serving dishes and bowls.
Fold down the tines to place pots and pans flat on the bottom.
Ensure dishware items do not block the spray arm above from rotating.
If you need more height for tall items, you can raise the upper basket. See instructions on previous pages.
Cutlery basket
►
►
►
►
Mix spoons with other cutlery to prevent them to bond together.
Use the grid element in order to separate the cutlery.
Place cutlery with the handles down for better washing results.
If long items may block the spray arm find a horizontal positioning in the upper basket.
CAUTION!
Put sharp and pointed items with the blade pointing downward to keep them out of harm’s way.
23
NZ AU
Daily Use
Detergent
Please use only a dedicated dishwasher detergent and follow the related instructions and dosage on its package.
Using powder detergent
For powder detergent quantities, refer to the following 'Powder detergent quantity recommendations' table and the detergent manufacturer’s guidance. No detergent is needed for RINSE.
Main wash compartment
Pre-wash compartment
Rinse aid compartment
Check that the dispenser is empty and dry. Add powder detergent or tablets to the detergent dispenser.
Remove any excess detergent then slide the cover closed. It will click into place.
If required, add additional detergent to the pre-wash compartment on top of the dispenser.
When washing heavily soiled dishware in hard water, more detergent may be required. Refer to 'Powder detergent quantity recommendations'.
Multitabs
These Multitabs detergent tablets could include two different agents for water softening, rinse aid and other functions.The softener and rinse aid setting must be adjusted according to section BEFORE FIRST USE.
Usually the default setting performs well. If there are streaks, stains, shim- mer etc., refer to section TROUBLESHOOTING and BEFORE FIRST USE .
Detergent tablets do not fully dissolve with short programmes.
That may cause bad washing results and detergent residues.
If detergent without multifunction should be used again:
1. Save 3 to 5 tablets.
2. Adjust the softener and rinse aid setting according to section BEFORE
FIRST USE.
3. Use Multitabs detergent tablets for the next 3 to 5 wash cycles.
24
Daily Use
NZ AU
Start a Programme
1. Close the door.
2. Press the ON/OFF button
3. Press the program button
programme indicator flashes.
.
you want to select and then the required
Additionally the display shows the programme run-time .
4. If need select a start time for a delay start, refer to section START
A PROGRAMME WITH DELAY.
5. Press the START/PAUSE
delay start.
button to activate the programme or the
The programme starts.The display acts now as countdown of the
remaining run-time.
The appliance remembers the last programme you used.The
next time the appliance is switched on, the appliance pre-selects
the programme used last time.
Interrupt a Running Programme
To interrupt a running programme:
Press the START/PAUSE is
Open the door. button . The displayed cycle time
To continue a paused programme:
Close the door and press the button to continue the programme from the point of interruption.To prevent poor wash performance, do not leave the door open for a long time .
Activate / Deactivate options
On some models, you can combine a washing program and an additional function program to operate.
1. Switch on the appliance.
2. press to select the wash programme The display shows the
duration o f the programme.
3. If needed ， select and it can be matched with the current washing procedure.
4. Press the button to start the program.
25
NZ AU
Daily Use
Start a Programme with Delay
Set a start time by the following procedure in order to delay a programme start:
1.
Set a programme.
2.
Press the reservation button until the display shows the required delay time (from 1 to 24hours).
3.
Press the START/PAUSE button .
► The display shows the countdown of the start delay.
► When the countdown is completed, the programme starts.
Cancel a Delayed Start
When the current reservation time is displayed for 24h, press the reservation button again to cancel the reservation. Afterwards the display shows with the duration time for the set programme.
Cancel Start Delay Programme
Press the ON/OFF button for about 1 second.
The start delay is cancelled.
The programme is aborted.
The appliance is switched off.
Start a new programme and a delayed start if needed .
CAUTION!
If a programme will be aborted in the process of washing dishes ， the residue of detergent remains on the dishes. These can cause damage to health. Make sure to rinse off the detergent residues completely before using these dishes again.
Make sure that there is detergent in the detergent dispenser before start a new programme.
26
27
Daily Use
NZ AU
Automatic door opening setting
1. The appliance is switched on.
2. Press and hold for about 3 seconds until :
The display shows the current Rinse Aid setting.
3. Press to scroll to .
4. Press to toggle between and .
represents that the automatic door opening function is turned off.
represents that the automatic door opening function is turned on.
5. Press to save the option .
滚滚长江东逝水
6. To exit ， press and hold 1 second.
Automatic door opening occurs in the drying stage. The time nodes of automatic door opening are different due to different washing procedures
End of Programme
The door will open automatically before the program ends. When the programme is completed, the display shows END and the icon of the washing program and additional functions after running is on, the buzzer rings for 3 times, and standby after 2min without key operation. If the child lock is activated ， the child lock can’t be cancelled.
CAUTION!
If the door will be opened immediately after the end of programme,
hot steam can escape. Danger of scalding. Open the door carefully.
Standby Mode
The switched on appliance will go into standby mode if it is not activated within 2 minutes before starting a programme, or at the end of a programme.
This saves energy. The display switches off.
NZ AU
Wi-Fi Connection
Your appliance can be connected to your home wireless network and
Selected remotely using the app.
Getting started
Ensure your home Wi-Fi network is turned on.
You will be given step by step guidance on both your appliance and mobile device. It may take up to 10 minutes to connect your appliance.
For further guidance and troubleshooting, please refer to the app.
On your mobile device:
1.Download the app from:
Australia https://www.haier.com.au/smart
New Zealand https://www.haier.co.nz/smart
2.Register and create an account.
3.Add your appliance and set up the Wi-Fi connection.
Connecting to your home Wi-Fi
With the product in standby (Screen is off) ：
Press and hold for 5 seconds ， the display will show .
You can now, follow the prompts in the app to complete set-up.
Enabling Remote mode
1. When the machine is connected with app, press button, and corner mark on the nixie tube will light up. You can start the washing program on the mobile device through the app. If the remote function is not activated, the mobile device cannot start the washing program and start
the scheduled operation.
2. When the remote function is activated and the door is opened before starting and restarting a programme, the remote function is cancelled.
In case of power failure, the remote function will be cancelled.
3. After pressing button once, the mobile app can start the dishwasher program. You can control the dishwasher by app, such as: select a cycle, cancel or pause a cycle, add the additional functions.
28
Care and Cleaning
NZ AU
Cleaning the filter, spray arms and filter plate
Disconnect the dishwasher from the power supply and allow it to cool before undertaking any cleaning or maintenance.
We recommend that the drain filter and filter plate are removed and cleaned once a month or whenever there is evidence of food particles. The spray arms in normal use should require cleaning less frequently. Lower and upper spray arms can be shaken to remove any foreign material, cleaned in hot water, then rinsed in clean water.
The dishwasher must be used with the filter plate, drain filter and spray arms correctly in place. If using a dishwasher cleaner or descaler, refer to manufacturer instructions.
Care and Cleaning the Filters
filter cap filter base button
Twist the filter anti-clockwise to release.
Lift to remove.
Separate the filter cap from the base by pressing the release buttons and lifting.
Do not attempt to remove the filter by force as this may cause damage.
Clean under hot water and rinse thoroughly.
locating notch clips
Replacing the filter
1. Align the filter cap with the notch on the filter base for one side.
2. Press the button to settle the filter cap on the filter base for the other side.
3. Slot the filter plate under the locating clips at the rear of the drain and push firmly back into place. Ensure the filter plate is flush with the dishwasher base.
4. Place the drain filter back into the dishwasher base. Rotate clockwise to click into place.
An incorrect assembly or position of filters will cause bad washing results and possibly serious damage to the appliance.
If any filter is removed make sure that no solid object of any size is left beyond these filters.
29
NZ AU
Care and Cleaning of the Spray Arms
Spray arms should be regularly inspected for dirt. If needed the spray arms could be removed.
top spray arm
Do not remove the top spray arm for cleaning.
Clean with a small, plastic-bristled brush.
If heavily soiled or blocked use a dishwasher cleaner/descaler. Follow the manufacturer’s instructions.
Cleaning the Upper spray arm
To remove the upper spray arm, turn the locking nut clockwise to release.
Rinse the spray arm thoroughly under running water, then refit.
Cleaning the lower spray arm
To remove the lower spray arm, lift it from the base of the dishwasher.
Rinse the spray arm thoroughly under running water, then refit.
Ensure the arm rotates freely when refitted.
External Cleaning
CAUTION!
Never clean the appliance with a steam cleaner.
Never use bleach or other chlorinated detergents.
Clean the appliance with a damp soft cloth.
Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads or solvents.
Clean the door seal with a damp soft cloth.
30
Troubleshooting
NZ AU
Many occuring problems could be solved by yourself without specific expertise. In case of a problem please check all shown possibilities and follow below instructions before you contact an after sales service.
CAUTION!
Before maintenance, deactivate the appliance and disconnect the power plug from the power socket.
Electrical equipment should be serviced only by qualified electrical experts, because improper repairs can cause considerable consequential damages.
The appliance does not start, or it stops during operation
Problem
The programme does not start.
Rinse Aid Indicator
is light.
Possible cause Possible solution
Appliance door is open.
Delay start is set.
Close the appliance door.
Refer to displayed time.
Power plug is not connected in the power socket.
Connect the power plug.
Fuse in the house circuit is damaged.
Replace the fuse.
Rinse aid dispenser is empty.
Refill Rinse aid until full.
Error codes on the display
Acoustic alarm, display shows
ALARMCODE
The appliance does not fill with water.
Water tap is closed.
Water inlet hose has a kink or a bend.
In case of aqua-stop system: water protection is triggered; the marker (C) is red.
• Open the water tap.
Note: Whenever Error ‘ ’ is solved switch off the appliance and restart the programm.
Make sure that the position of the hose is correct.
The hose must be replaced.
Filter in the water inlet hose is clogged.
Water inlet is clogged.
Water pressure is too low.
Clean the filter at the inlet hose connections at tap and the rear of the appliance.
Check water flow from tap.
Contact your local water authority.
31
NZ AU
Problem
Acoustic alarm, display shows
ALARMCODE
Leak: The drain pump runs permanently .
Possible cause Possible solution
•
•
•
Anti-flood device is on:
There are water leakages in the appliance.
The water inlet valve is open and blocked.
The drainage is blocked.
•
•
滚滚长江东逝水
Close the water tap.
Disconnect appliance from power supply.
Contact Service.
Washing Results are not satisfactory
The dishes are not clean.
Whitish streaks, stains or bluish layers on glasses and dishes.
Filters are clogged.
Filters are not correctly assembled and installed.
Spray arms are clogged.
Programme was not applicable for the type of load and food remnants.
Incorrect position of the items in the baskets. Water could not wash all items.
Spray arms could not turn freely.
No detergent or insufficient quantity of detergent in the detergent dispenser.
The wash cycle was interrupted by a long break.
Released quantity of rinse aid is too much.
Quantity of detergent was too much.
Multitab detergent tablets used with a short programme might not fully dissolve.
Clean the filters.
Make sure that the filters are correctly assembled and installed.
Rem ove remaining food remnants with a thin pointed object.
Make sure that the programme is applicable for the type of load and food remnants.
Make sure that the position of the items in the baskets is correct and that the water can easily wash all items.
Make sure that the position of the items in the baskets is correct and does not cause the blockage of the spray arms.
Make sure that you add the correct quantity detergent in the dispenser before you start a programme.
Do not open the door or cut power supply during the wash cycle.
Decrease the released quantity of rinse aid. Refer to section
DIFFERENT SETTINGS FOR RINSE
AID.
Make sure that you add the correct quantity of detergent in the dispenser before you start a programme.
Select a longer programme when
.
32
33
Troubleshooting
NZ AU
Problem Possible cause
Dry water drop stains on glasses and dishes.
Rinse aid dosage is too low.
Possible solution
Increase the released quantity of rinse aid.
Refer to section DIFFERENT SETTINGS
FOR RINSE AID.
The dishes are wet.
The dishes are wet and matte.
• Programme had no drying phase.
• Programme had a low temperature drying phase.
Rinse aid dispenser is empty.
Open the door slightly and leave it ajar
(about 100 mm) to help the drying process.
Refill rinse aid into the dispenser and reset the rinse aid indicator.
Economic and Environmental Use
It is not recommended to pre-rinse the dishes under running water.
Select the washing programmes by type and degree of contamination of the dishes.
Select the economic mode programme ECO for normal soiled items.
The most economically use you will have with full loading.
Only use the manufacturer’s recommended detergent or rinse aid dosages.
NZ AU
Standards Test
Wash programme
Powder detergent quantities
Rinse aid dosage level
Maximum number of place settings
Height adjustment of upper basket
Recommended loading patterns
Eco
When the programme is finished, open the door to help with drying
5g pre-wash+28.75 g main wash
15
Ensure the upper basket is in its lower most position
Upper basket Lower basket
34
Customer service
We recommend our Haier Customer Service and the use of original spare parts.
If you have a problem with your appliance, please first check
TROUBLESHOOTING.
If you cannot find a solution there, please contact:
Your local dealer.
The Service & Support area at www.haier.com.au
or at www.haier.co.nz
where you can activate the service claim and also find FAQs.
To contact our Service, ensure that you have the following data available.
The information can be found on the rating plate at the door.
Model _____________________
Serial No. _____________________
条形码尺寸40*8mm，由厂家生成。
0120506218
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement
Key features
Wi-Fi connection
Delayed start
Child lock
Automatic door opening
Adjustable upper basket
Multiple wash programs
Frequently asked questions
Refer to the 'Wi-Fi Connection' section in the manual for detailed instructions on connecting your dishwasher to your home wireless network.
The rinse aid indicator lights up when the rinse aid dispenser is empty. Refill the rinse aid dispenser and the indicator will turn off.
You can adjust the rinse aid dosage in the 'How to Adjust Settings' section of the manual. This will help you achieve optimal drying results.
Refer to the 'Troubleshooting' section for possible causes and solutions, including checking the water tap, inlet hose, and filter.
It is recommended to clean the drain filter and filter plate once a month or whenever there is evidence of food particles. The spray arms should be cleaned less frequently.