Epson | ES-600C | Specifications | Epson ES-600C Specifications

ES-600C
1 Option Name
Scanner Features
The ES-600C is a low-cost, high-resolution (300 DPI) color
image scanner for use with A4 or letter-size sheets. Its main
features are:
Bidirectional
Parallel Interface
Board for the PC
1 Product
1 Description
Number 1
B808012 1 Available separately from kit for
customers who already have
scanning software. Provides a
bidirectional port in the PC to
connect to the parallel interface in
the scanner.
Available separately from kit for
C1-9E-A
customers who already have
scanning software.
B023001-B Scanner w/bidirectional parallel port.
B023001-S Scanner w/SCSI ports.
Ll Basic resolution:
300 DPI
B Full-color scanning:
By means of an 8-bit A/D
converter
Cl Monochrome levels:
256
Cl Reading areas:
A4 and US letter size
Cl High speed scanning:
Monochrome Approx. 20 sec.
Color (page) Approx. 70 sec.
Color (line)
Approx. 80 sec.
Ll Picture Publisher 3.1
Scanned image can be reduced/
enlarged from 50% to 200%
Q TWAIN Scanner Driver
0 Zoom function:
Cl Software command level: ESC/I - B4
Ll Available options:
Auto Document Feeder (ADF),
Transparency Unit
Bidirectional
Parallel Cable
ES-600C-B
ES-600C-S
Interface Kit Contents
BIDIDOS Interface Kit
Ll Caere OCR TryPack
Cl Bidirectional Interface Board for the PC
Li Bidirectional Parallel Cable
SCSIDOS Interface Kit
0 Picture Publisher 3.1
Cl ES-300C emulation
Cl Selectable resolution allows use with various printers
Cl Caere OCR TryPack
0 TWAIN Scanner Driver
Cl Scanner can perform line-sequence reading (l-time color
reading)
0 SCSI Interface Board for the PC
LI Scanner offers tone correction levels and various other
processing features
ESMAC Interface Kit
L Color correction tables are available for various printer
types
Ll Block data transfer function is available
Options
Option Name
Automatic
Document Feeder
(ADF)
Transparency Unit
Cl Adobe Photoshop 2.0
0 PIM and DA
0 Epson Apple Scanner Driver
Cl SCSI Cable (50-pin to 25-pin)
Scanner Specifications
Product
Number
B813011
B813021
Description
Feeds up to 30 sheets. Replaces
scanner cover, but still allows
scanning of individual items.
Allows scanning of slides,
negatives, and transparencies.
Replaces scanner cover, but still
allows scanning of individual items.
Allows scanning of items up to
5" X 5".
Bidirectional
Parallel Interface Kit
BIDIDOS
SCSIDOS Interface
Kit
SCSIDOS
Mac Interface Kit
ESMAC
Scanners
Cl SCSI Cable (50-pin to 50-pin)
Includes bidirectional parallel board
for the PC, cable, TWAIN scanner
driver, and image editing software.
Includes SCSI board for the PC,
cable, TWAIN scanner driver, and
image editing software.
1 Includes scanner Plug-In Module
(PM) and Desk Accessory (DA),
cable, Epson Apple Scanner Driver.
and image editing software.
Scanner type:
Flatbed, color/monochrome
Photoelectric
device:
CCD line sensor
Effective pixels:
2550 dots by 3510 dots at 300 dpi, 100%
Maximum
document size:
216 mm by 297 mm
(8.5 inches by 11.7 inches)
US letter size or A4
Scanning
resolution:
300 dpi
Output resolution: 50, 60, 72, 75, 80, 90, 100, 120, 133, 144,
150, 160, 175, 180, 200, 216, 240, 300, 320,
360, 400),480 and 600 dpi.
Values above 300 through software
interpolation.
11/2/92
ES-600C-1
ES-600C
Scanning speed:
Monochrome mode:
about 20 seconds
Color page sequence mode:
about 70 seconds
Color line sequence mode:
about 80 seconds
Color separation:
By switching light sources (G, R, B)
Reading sequence: Monochrome mode:
One-time scanning (Dropout color
selectable from Green, Red, or Blue.)
Electrical Specifications
Voltage:
120 VAC, ± 10%
Frequency:
49.5 to 60.5 Hz
Power
consumption:
Approx. 20 W (self test in monochrome
mode)
Insulation
resistance:
10 Mn between AC power line and
chassis at 500 VDC
Color page sequence mode:
Three-time scanning (G, R, B)
Environmental Conditions
Color line sequence mode:
One-time scanning (G, R, B)
Temperature:
Size:
50% to 200% in 1% steps.
Image data:
8 bits per pixel per color maximum
Gradation:
8 bits per pixel per color maximum
Brightness:
7 levels
Halftoning process: Enable/disable selectable.
3 halftoning modes (A, B, and C) and
4 dither patterns (A, B, C, and D) for
bi-level data
(Halftoning mode A only in color line
sequence mode)
(2 downloadable dither patterns)
Operation: 40° F to 95° F (5° C to 35° C)
Storage: 10° F to 150° F (-20° C to 60° C)
Humidity:
Operation: 10% to 80%, without
condensation
Storage: 10% to 85%, without
condensation
Operating
conditions:
Ordinary office or home conditions.
Extreme dust should be avoided.
Operation under direct sunlight
or near a strong light source should be
avoided.
Note: Specifications are subject to change without notice.
Halftoning mode A for quad-level data
Gamma correction: 2 for CRT display
3 for printer
1 for user defined
Color correction:
1 type for CRT display
3 types for printer output, available in
color line sequence mode only
Interface:
Bidirectional parallel or SCSI
Light source:
Noble gas fluorescent lamps (3 lamps)
Reliability:
Main unit: MCBF 100,000 cycles of
carriage movement
Dimensions and
weight:
Width: 333 mm (13 inches)
Depth: 568 mm (22 inches)
Height: 125 mm (5 inches)
Weight: about 9 kg (20 lbs)
ES-600C-2
The Control Panel
Buttons
OPERATE button
Turns the scanner on and off. When
the power is turned on, the scanner
is reset.
RESET button
Initializes the scanner. Every value is
reset to the default value. The RESET
button is located under the
DIP-switch cover.
Indicators
READY (green LED)
Comes on when the scanner is ready
to receive data.
ERROR (red LED)
Indicates that an error has occurred.
11/2/92
Scanners
Dip Switches
microseconds at the
~1
Default setting: All Off
0 Regarding Pin No. 19-30. “return” denotes the twisted-pair return, to be
connected at signal ground level. For interface wiring, be sure to use a
twisted-pair cable for each signal, and to complete the connection on
the return side. These cables should be shielded and the ground
connected to the chassis of the host computer and the scanner.
0 All interface conditions are based on TTL level.
SCSI
Pin Assignments
Signal pin assignments
Parallel
Signal pin assignments
Pin
No.
Return Signal
pin
1
19
STROBE
2
3
4
5
6
7
8
9
20
21
22
23
24
25
26
27
DATA0
DATA1
DATA2
DATA3
DATA4
DATA5
DATA6
DATA7
IN/OUT
IN/OUT
IN/OUT
IN/OUT
IN/OUT
IN/OUT
IN/OUT
IN/OUT
These signals represent
information of bits 1 to 8,
respectively. Each signal is at a
high level when data is logical 1
and low when it is logical 0.
10
28
ACKNLG
OUT/(IN)
About a 12-microsecond pulse.
Low indicates that data has been
received and that the scanner is
ready to accept more data.
11
29
BUSY
OUT/(IN)
When this signal is high, the
scanner cannot receive data.
The signal is high:
1) during data entry
2) during scanning
3) when the scanner is not
ready
4) when the scanner has an
error
Scanners
Direction
STROBE pulse to read in or
send out data. Pulse width must
be more than 0.5 microseconds
at the receiving terminal.
11/2/92
ES-600C-3
ES-600C
SCSI Setup
Error Codes
SCSI ID number setting,
COMMAND Errors
The factory default of the scanner’s SCSI ID is number 2. The
computer is always ID number 7. If you are going to add the
scanner to a system in which one of your SCSI devices
already has a SCSI ID of 2, change the ID number of the
scanner to an unused number as described below.
Cause:
An unidentified command is detected.
Disposition:
The scanner ignores the command or
parameter. (Therefore, the current
settings or the default values remain
in effect.) The scanner sends a
NACK, and waits for the next
command or parameter.
Indications:
ES-600C
Remedy:
The error condition is cleared when the
scanner receives a correct command.
1. Locate the SCSI ID rotary switch next to the SCSI
connectors on the rear panel of the scanner.
READY LED comes ON
ERROR LED comes ON
INTERFACE Errors
Cause:
A wrong procedure is detected in
interface communications. With a
SCSI, a transition is frozen more than
30 seconds, except for the BUS FREE
phase.
Disposition:
The lamp goes OFF and the scanner
stops operation.
Indications:
ES-600C
Remedy:
Turn the scanner off and then back on.
2. To change the SCSI ID, turn the small dial to the desired
number.
e
Caution:
Do not set the SCSI ID to 8 or 9, and do not set the ID
number to an ID that is already assigned to another device.
The computer, scanner, and other devices will not function
properly.
READY LED goes OFF
ERROR LED blinks
Press the RESET button.
Terminator setting
The INIT signal in the parallel interface
turns active.
If the scanner is the only SCSI device you are going to
connect to your computer or if it is the last device in the daisy
chain, leave the terminator on. The terminator is on when
Switch 1 of the terminator switches, located between the SCSI
connector on the rear panel, is on. See below for the location
of the switches.
The RESET signal in SCSI turns active.
Complete BUS DEVICE RESET message
in the SCSI.
Acceptable commands: None.
FATAL Errors
Cause:
The lamp is broken.
Power is turned on without removing
the transportation screw.
System breakdown.
The scanner should always be the last device on the daisy
chain. You do not need to change the factory settings for the
terminator switches as long as the scanner is the only SCSI
device or the last SCSI device in the daisy chain.
An error related to the ADF is detected,
such as cover open, paper jamming,
etc.
Indications:
ES-600C
READY LED blinks.
ERROR LED blinks.
If you decide to connect the scanner in the middle of the
daisy chain, turn terminator Switch 1 off. (Switch 2 must
always be off.)
ES-600C-4
11/2/92
Scanners
Remedy:
Turn the scanner off and then back on.
Press the RESET button.
Send ESC @ codes to the scanner.
The INIT signal in the parallel interface
turns active.
The reset signal turns active in SCSI.
Complete BUS DEVICE RESET
message in the SCSI.
Acceptable commands: ESC F, ESC f, ESC @
OPTION Error (Available only when an option is installed and
enabled with ESC e)
Cause:
An error related to the option is
detected, such as cover open, paper
jamming, etc.
Indications:
ES-600C
Remedy:
This error condition is cleared when
the cause of the error is corrected.
READY LED blinks.
ERROR LED blinks.
Information Reference List
Engineering Change Notices
None
Product Support Bulletins
None
Technical Support Bulletins
None
Related Documentation
TM-ES600C
ES-600C Service Manual
PL-ES600C
ES-600C Parts Price List
SPKES600C
ES-600C Self Paced Kit
4001572
ES-600C User’s Guide
TM-B813021
Transparency Unit Service Manual
PL-B813021
Transparency Unit Parts Price List
SPKB813021
Transparency Unit Self Paced Kit
Scanners
11/2/92
ES-600C-5
Download PDF

advertising