Medifab Kiddiequip Houdini 22 User Manual

Medifab Medical Fabrication
Australia: Lot 26, Wade Court, SALE, VIC 3853
New Zealand: 7 Allens Road ASHBURTON 7700
Call 1300 543 343 (AU) Call 0800 543 343 (NZ)
www.medifab.com [email protected]
ABN # 49 828 922 466
Designed to offer more postural support and a certain degree of restraint to the passenger.
This harness incorporates a chest strap in addition to the waist belt which offers a more secure fitting to
the body to help retain the child or adult from manoeuvring out of it. This harness will only fit seats with
access between the seat back and seat cushion.
Fasten the bar buckle behind the seat back.
The top tongue-end of the vehicle buckle should
rest just over the top of the seat back.
The body harness is fitted to the passenger
BEFORE entering the vehicle.
Sit the passenger wearing the body harness on
the under-strap. (When using the harness with a
baby/child seat, fit the fixing strap first as above.
Then place the child seat on top of fixing strap
ready for the child to sit in.
Connect the vehicle buckle halves together at the
top of the shoulder straps.
Extend the shoulder straps so the buckle is
positioned away from the passengers head.
Place the fixing/stabiliser strap in front of the
seatback with the (38mm) under-strap lying in
position on the seat.
Pass the tail end of the (50mm) fixing strap
down through the access between the backrest
& seat cushion.
Hold the padded comfort sleeve, at the bottom
of the PVC chest pad & push it upwards to
uncover the side-squeeze attachment buckle
for the under-strap.
Connect the buckle ends & pull comfort sleeve
back down to cover the buckle.
Ensure all straps are tight and secure.
Warning: It is not a safety harness & should be worn in
conjunction with the vehicle safety belt.