User Manual
Bluetooth Wireless Earbuds T3
•18-month limited warranty
• Lifetime technical support
• [email protected]
• Facebook: @LinpaOfficial
Connection
Pair with Your Device：
Taking the earbuds from the charging
case,the left LED lights alternately flash
blue and red,the right LED lights off.(Make
sure tear off ransparent static sticker on the
bottom of the earbuds)
Enter pairing
mode“T3”
The LED light off
Connected
Tips:
®
Bluetooth
Devices T3
on
>
- After booting, no connection automatically shuts
down within the 120s
- Connected for 20 minutes without any playback,it will
auto shutdown
- When turning off the Bluetooth function of the phone,
the earbuds will shut down automatically within
120s.
Pairing issues
Pairing issues:
The left and right sides can be used separately. When one side works, how
do I pair my earbuds from single mode to stereo mode?
Step 1->: Put them back to the case.
Step 2->: Delete “T3” from Bluetooth menu on your device, if your device has been
connected “T3” .
Step 3->: Taking the earbuds from the charging case, both earbuds are turned on, the
LED lights alternately flash blue and red,Double click on the “R” side.They will
force the headphone to pair. After the pairing is successful, "R" side light is off,
‘’ L’’ side flashing red and blue.
Step 4->: If prompted, enter code "0000".
Controls
Short press
Music
Play/pause songs
Double click(Left)
Double click(Right)
Previous track
Next track
Double click left earbud and hold
Double click right earbud and hold
Decrease the volume
Increase the volume
Tips: If volume too low, increase the volume from earbuds side for Andriod
device.
Calling
Press
Answer/End Call
Long press 2 seconds
Reject the call
Long press 1 second
Reject third party calls
Double click
Connect a new call while retaining the current call
Three-party call
Double-click to switch between the second party
and the third party, and there is a 'didi' prompt
when switching calls.
Siri/Other voice control software
Connected to your phone/device,
Long press for 2 seconds
Turn On/Off
Take the earbuds from the charging case,
it will automatically turn on. Or manually
press 1s in the off state.
Blue light flashes 3 seconds
Long press 5 seconds
Red light flashes 3 seconds
Charging
1 Please check the power adaptor if it is 5V 1A with good
quality. 2 Clean the thimble and contacts with alcohol to ensure
that the headphone charging contact is conductive.
Charge
Earbud status indicator
1.5 h
Red light flashes
slowly
Low battery
LED steady red
Charging
LED light off
Fully charged
Charging case status indicator
LED steady red
Charging
LED light off
Fully charged
FAQ
Sound and Volume:
Q: The sound quality of the headphones is not good?
A: For all of the headphone products, they need a period of use to get better sound
quality. Some components, such as transistors, integrated circuits, and capacitors,
are inherently unstable in electrical parameters and can be stabilized after a period
of use.
Q: Why cannot synchronize the volume?
A: Our products are mainly compatible with iPhone, Samsung, and other mainstream
mobile phones,they may not be able to adapt to all computers, because there are
too many Android systems, our headphones may not match all types of Android
systems. If the volume cannot be synchronized, it needed to adjust it manually
from your phone and computer.
Q: How to keep clear calls?
A: When using with a phone call, please turn the volume to the maximum to avoid making
calls in noisy environments, such as subways and buses. These places will affect the
signal connection and stability of the earbuds.
Attention
Never disassemble or modify your earphone for any reasons to avoid any damages
and danger.
- Do not store the earphone in extreme temperature(under 0℃ or over 45℃).
- Do not use this earphone during a thunderstorm to avoid irregular function and
increased risk of electricshock.
- Do not use harsh chemicals or strong detergents to clean the earbuds.
- Keep the earbuds dry
Maintenance:
1. The Reasons of our products has a battery inside it, also the battery itself has power
consumption issue, so please make sure that the last charge is harged once a week
in order to prevent low battery power caused by the protection plate self-protection.
Specifications
Model: T3
Standby Time: One year
Talk/Playing Time: 50 hours (50% volume)
Bluetooth Standard: V5.0
Frequency Range: 2.4GHz
Operating Range: 33 feet/10 meters (No obstacles)
Earphone Battery/Charging Case: 100mah/450mah
Charging Time（Earphone/Charging Case）: 2 hours/1.5 hours
FCC Requirement
changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
">
