2008
User Manual for ML2000
USB Smart Card Reader
Dag Ivar Findreng
Megalink AS
V8.10
User Manual for ML2000
User Manual for ML2000
USB Smart Card Reader
Table of contents
1
USB Smart Card Reader .............................................................................................................. 3
1.1
Installing the USB drives ..................................................................................................... 3
1.1.1 Windows Vista ................................................................................................................. 4
1.1.2 Windows XP SP2 ............................................................................................................. 9
1.1.3 Windows 2000 ............................................................................................................... 12
NB: Read the manual carefully when
installing the USB drivers!
Require
MLCard 8.10 or higher
and
Monitor software DU-735 or higher
16.06.2015 - V8.10
USB Smart Card Reader
2
User Manual for ML2000
1 USB Smart Card Reader
1.1 Installing the USB drives
It’s important to strictly follow the instruction manual when installing the USB drivers. See
the section describing your operating system.
You can download the latest version of MLCard, containing the USB drivers from our homepage:
http://www.megalink.no
NB!
The card reader is the SCR335 from SCM Microsystems. It’s important that the correct driver is
installed. Make sure that Windows™ do not download drivers itself.
MLCard does only work with this specific card reader.
MLCard must be version 8.10 or higher.
16.06.2015 - V8.10
USB Smart Card Reader
3
User Manual for ML2000
1.1.1 Windows Vista
Windows Vista installs the driver without asking the user. Thus you have to manually override the
driver setup.
Please do the following:
Close all open applications. Connect the Smart Card Reader and wait until Vista displays the
“Installed new devices” dialog.
Then open the Start Menu and start the “device manager” application.
16.06.2015 - V8.10
USB Smart Card Reader
4
User Manual for ML2000
Right click the device “USB Smart Card Reader”, located under Smart Card readers, and open
the Proterties dialog.
16.06.2015 - V8.10
USB Smart Card Reader
5
User Manual for ML2000
Press ”Update Driver”.
16.06.2015 - V8.10
USB Smart Card Reader
6
User Manual for ML2000
Select ”Browse my computer for driver, manually”.
Browse to the folder MLCard is located and press Next >.
16.06.2015 - V8.10
USB Smart Card Reader
7
User Manual for ML2000
The driver installation is completed. Press Finish.
You can now start MLCard.
.
16.06.2015 - V8.10
USB Smart Card Reader
8
User Manual for ML2000
1.1.2 Windows XP SP2
Before you begin, close all active applications running on your computer, including MLRange.
Connect the Smart Card Reader to the computer.
Windows will automatically detect your new device. The following dialog will appear:
Select No, not this time and press Next >.
Select Install from a list or specific location (Advanced) and press Next >.
16.06.2015 - V8.10
USB Smart Card Reader
9
User Manual for ML2000
Select Search for the best driver in these locations. and enable ONLY Include this location in
the search:. Browse to the folder MLCard is located. Then press Next >.
Select Continue Anyway.
16.06.2015 - V8.10
USB Smart Card Reader
10
User Manual for ML2000
Please wait while the required files are copied.
The driver installation is completed. Press Finish.
You can now start MLCard.
16.06.2015 - V8.10
USB Smart Card Reader
11
User Manual for ML2000
1.1.3 Windows 2000
Before you begin, close all active applications running on your computer, including MLRange.
Connect the Smart Card Reader to the computer.
Windows will automatically detect your new device. The following dialog will appear:
Please wait.
Press Next >.
16.06.2015 - V8.10
USB Smart Card Reader
12
User Manual for ML2000
Select Search for a suitable driver for my device (recommended).
Select ONLY Specify a location. Press Next >.
16.06.2015 - V8.10
USB Smart Card Reader
13
User Manual for ML2000
Browse to the folder MLCard is located. Then press OK.
Press Next >.
16.06.2015 - V8.10
USB Smart Card Reader
14
User Manual for ML2000
The driver installation is completed. Press Finish.
You can now start MLCard.
16.06.2015 - V8.10
USB Smart Card Reader
15
">
