advertisement
Dell OptiPlex 3060 Micro
Setup and specifications guide
Regulatory Model: D10U
Regulatory Type: D10U003
July 2020
Rev. A03
Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2016 - 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Other trademarks may be trademarks of their respective owners.
Contents
Contents 3
4 Contents
1. Connect the keyboard and mouse.
1
Set up your computer
2. Connect to your network using a cable, or connect to a wireless network.
3. Connect the display.
Set up your computer 5
NOTE: If you ordered your computer with a discrete graphics card, the HDMI and the display ports on the back panel of your computer are covered. Connect the display to the discrete graphics card.
4. Connect the power cable.
5. Press the power button.
6. Follow the instructions on the screen to finish Windows setup:
6 Set up your computer
a. Connect to a network.
b. Sign-in to your Microsoft account or create a new account.
7. Locate Dell apps.
Table 1. Locate Dell apps
Dell Apps Description
Register your computer
Dell Help & Support
SupportAssist — Check and update your computer
Set up your computer 7
2
Chassis
This chapter illustrates the multiple chassis views along with the ports and connectors and also explains the FN hot key combinations.
Topics:
•
•
Front view
1. Power button and power light/diagnostic LED
2. Hard drive activity light
3. Headset/Universal audio jack port (3.5 mm headphone/microphone combo port)
4. Line-out port
5. USB 3.1 Gen 1 ports (2)
8 Chassis
Back view
1. External antenna connectors (optional)
3. USB 2.0 port
5. USB 3.1 Gen 1 ports (2)
7. Network port
9. Service tag
11. DisplayPort
13. Power connector port
2. DP1.2/HDMI2.0/VGA/Serial/Serial-PS/2 (Optional)
4. Cable holder
6. Padlock ring
8. USB 2.0 port (supports SmartPower On)
10. Kensington security cable slot
12. HDMI port
Chassis 9
3
System specifications
NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For more information about the configuration of your computer, go to Help and Support in your Windows operating system and select the option to view information about your computer.
Topics:
•
•
•
•
•
HDD and Optane memory configuration
•
•
•
•
•
•
•
•
•
Processor
Global Standard Products (GSP) are a subset of Dell’s relationship products that are managed for availability and synchronized transitions on a worldwide basis. They ensure the same platform is available for purchase globally. This allows customers to reduce the number of configurations managed on a worldwide basis, thereby reducing their costs. They also enable companies to implement global IT standards by locking in specific product configurations worldwide. The following GSP processors identified below will be made available to Dell customers.
NOTE: Processor numbers are not a measure of performance. Processor availability is subject to change and may vary by region/country.
Table 2. Processor specifications
Type UMA Graphics
Intel Celeron G4900T (2 Cores/2 MB cache/2 Threads/2.9
GHz/35 W); supports Windows 10/Linux
Intel UHD Graphics 610 with shared graphics memory
Intel UHD Graphics 610 with shared graphics memory Intel Pentium Gold G5400T (2 Cores/4 MB cache/4
Threads/3.1 GHz/35 W); supports Windows 10/Linux
Intel Pentium Gold G5500T (2 Cores/4 MB cache/4
Threads/3.2 GHz/35 W); supports Windows 10/Linux
Intel Core i3-8100T (4 Cores/6 MB cache/4 Threads/3.1
GHz/35 W); supports Windows 10/Linux
Intel Core i3-8300T (4 Cores/8 MB cache/4 Threads/3.2
GHz/35 W); supports Windows 10/Linux
Intel Ultra HD Graphics 630
Intel HD Graphics 630
Intel HD Graphics 630
10 System specifications
Table 2. Processor specifications (continued)
Type
Intel Core i5-8400T (6 Cores/9 MB cache/6 Threads/up to
3.3 GHz/35 W); supports Windows 10/Linux
UMA Graphics
Intel HD Graphics 630
Intel Core i5-8500T (6 Cores/9 MB cache/6 Threads/up to
3.5 GHz/35 W); supports Windows 10/Linux
Intel Core i7-8700T (6 Cores/12 MB cache/12 Threads/up to
4.0 GHz/35 W); supports Windows 10/Linux
Intel HD Graphics 630
Intel HD Graphics 630
Memory
Table 3. Memory specifications
Features
Minimum memory configuration
Maximum memory configuration
Number of slots
Maximum memory supported per slot
Memory options
Type
Speed
Specifications
4 GB
32 GB
2 SODIMM
16 GB
● 4 GB - 1 x 4 GB
● 8 GB - 1 x 8 GB
● 8 GB - 2 x 4 GB
● 16 GB - 2 x 8 GB
● 16 GB - 1 x 16 GB
● 32 GB - 2 x 16 GB
DDR4 SDRAM Non-ECC memory
● 2666 MHz
● 2400 MHz on Celeron, Pentium, and i3 processor
Storage
Table 4. Storage specifications
Type Form factor
One Solid-State Drive (SSD) M.2 2230 or 2280
One 2.5 inch Hard-Disk Drive
(HDD)
One 2.5 inch Self-encrypting drive Hard-Disk Drive (SED
HDD)
Interface
● SATA AHCI, Up to 6 Gbps
● PCIe 2.0 x 4 (NVMe SSD)
Up to 16Gbps.
● SATA C20 SED SSD
SATA AHCI, Up to 6 Gbps
Capacity
● Up to 512 GB
● Up to 512 GB
● Up to 512 GB
Up to 2 TB, upto 7200 RPM
SATA AHCI, Up to 6 Gbps Up to 512 GB, upto 7200 RPM
System specifications 11
Chipset
Table 5. Chipset specifications
Type Intel H370
Non-volatile memory on chipset Yes
BIOS configuration SPI (Serial Peripheral Interface)
Firmware-TPM (Discrete TPM disabled)
NIC EEPROM
256 Mbit (32 MB) located at SPI_FLASH on chipset
Trusted Platform Module (TPM) 2.0 Security Device (Discrete
TPM Enabled)
24 KB located at TPM 2.0 on chipset
By default the Platform Trust Technology feature is visible to the OS
LOM configuration contained within LOM e-fuse – no dedicated LOM EEPROM
HDD and Optane memory configuration
Table 6. Storage combinations
Primary/Boot drive
1 x 2.5 inch HDD with M.2 Optane
1 x 2.5 inch HDD with M.2 Optane
1 x 2.5 inch HDD with M.2 Optane
Specifications
2.5 500 GB 7200 rpm HDD + Intel Optane Memory
2.5 1 TB 7200 rpm HDD + Intel Optane Memory
2.5 2 TB 5400 rpm HDD + Intel Optane Memory
Audio
Table 7. Audio specifications
Features
Controller
Type
Speakers
Interface
Internal speaker amplifier
Specifications
Realtek ALC3234
Integrated
Internal speaker (mono)
● Headset port/Universal audio jack port - 3.5 mm headphone/microphone combo port (Front)
● Dell 2.0 Speaker System - AE215 (optional)
● Dell 2.1 Speaker System - AE415 (optional)
● Dell AX210 USB Stereo speakers (optional)
● Dell Wireless 360 Speaker System - AE715 (optional)
● AC511 Sound Bar (optional)
● Dell Professional Sound Bar - AE515 (optional)
● Dell Stereo Soundbar - AX510 (optional)
● Dell Performance USB Headset - AE2 (optional)
● Dell Pro Stereo Headsets - UC150/UC350 (optional)
2 W (RMS) per channel
12 System specifications
Video
Table 8. Video
Controller Type
Intel UHD
Graphics 630
UMA
Intel UHD
Graphics 610
UMA
Intel HD
Graphics 630
UMA
Communications
Table 9. Communications
Features
Network adapter
Wireless
CPU
Dependency
Intel Pentium
Gold G5500T
Intel Celeron
G4900T
Intel Pentium
Gold G5400T
Intel Core i3-8100T
Intel Core i3-8300T
Intel Core i5-8400T
Intel Core i5-8500T
Intel Core i7-8700T
Graphics memory type
Integrated
Capacity External display support
Shared system memory
DisplayPort 1.2
HDMI 1.4
DP/HDMI
2.0b/VGA
(optional)
Integrated
Integrated
Shared system memory
Shared system memory
DisplayPort 1.2
HDMI 1.4
DP/HDMI
2.0b/VGA
(optional)
DisplayPort 1.2
HDMI 1.4
DP/HDMI
2.0b/VGA
(optional)
Maximum resolution
DP 1.2 Max
4096x2304 @
60Hz
HDMI 1.4 Max
4096x2160 @ 30
Hz,
1.VGA Max
1920x1080
@60Hz
2.DP 1.2
4096x2304 @
60Hz
DP 1.2 Max
4096x2304 @
60Hz
HDMI 1.4 Max
4096x2160 @ 30
Hz,
1.VGA Max
1920x1080
@60Hz
2.DP 1.2
4096x2304 @
60Hz
DP 1.2 Max
4096x2304 @
60Hz
HDMI 1.4 Max
4096x2160 @ 30
Hz,
1.VGA Max
1920x1080
@60Hz
2.DP 1.2
4096x2304 @
60Hz
Specifications
Realtek RTL8111HSD-CG Ethernet LAN 10/100/1000
● Qualcomm QCA9377 Dual-band 1x1 802.11ac Wireless with
MU-MIMO + Bluetooth 4.1; 2.4 Ghz - 5 Ghz.
System specifications 13
Table 9. Communications (continued)
Features Specifications
● Qualcomm QCA61x4A Dual-band 2x2 802.11ac Wireless with MU-MIMO + Bluetooth 4.2; 2.4 Ghz - 5 Ghz.
● Intel Wireless-AC 9560, Dual-band 2x2 802.11ac Wi-Fi with
MU-MIMO + Bluetooth 5; 2.4 Ghz - 5 Ghz.
Ports and connectors
Table 10. Ports and connectors
Feature
USB
Security
Audio
Video
Network adapter
Serial port
Parallel port
Power supply
Table 12. Power supply
Features
Input Voltage
Input current (maximum)
Specification
● Two USB 2.0 port (One supports SmartPower On)
● Four USB 3.1 Gen 1 ports
Kensington lock slot
● Headset port/Universal audio jack port (3.5 mm headphone/microphone combo port)
● One line-out port
● DisplayPort 1.2
● HDMI 1.4 (UMA)
● DP/HDMI2.0b/VGA port (optional)
One RJ-45 connector
One serial port (optional)
One parallel port (optional)
System board connectors
Table 11. System board connectors
Connector
M.2 Connectors
M.2 Connectors
Serial ATA (SATA) connector
Description
1 - 2230/2280 (2280 for storage)
1 - 2230 (keyed to support Integrated or Discrete WiFi)
1 - Support Standard Rev 3.0
Specifications
100-240 V, 1.6 A, 50-60 Hz
● 65 W PSU (EPS Level V)
14 System specifications
Physical system dimensions
Table 13. Physical system dimensions
Features
Chassis volume (liters)
Chassis weight (pounds / kilograms)
Specifications
1.16
2.60/1.18
Table 14. Chassis dimensions
Features
Height (inches / centimeters)
Width (inches / centimeters)
Depth (inches / centimeters)
Shipping weight (pounds / kilograms – includes packaging materials)
Specifications
7.2/18.2
1.4/3.6
7/17.8
5.91/2.68
Table 15. Packaging parameters
Features
Height (inches / centimeters)
Width (inches / centimeters)
Depth (inches / centimeters)
Specifications
5.2/13.3
9.4/23.8
19.6/49.8
Security
Table 16. Security
Specifications
Trusted Platform Module (TPM) 2.0
1
Cable Cover
Chassis Intrusion Switch
Dell Smartcard Keyboard
Chassis lock slot and loop support
1 TPM is not available in all countries.
Optiplex 3060 Micro
Integrated on system board
Optional
Standard
Optional
Standard
Environmental
NOTE: For more details on Dell environmental features, please go to the environmental attributes section. See your specific region for availability.
Table 17. Environmental
Detail
Energy efficient power supply
Specifications
Standard
System specifications 15
Table 17. Environmental (continued)
Detail
Recyclable packaging
MultiPack packaging
Specifications
Yes
Optional, US only
16 System specifications
4
BIOS setup
CAUTION: Unless you are an expert computer user, do not change the settings in the BIOS Setup program.
Certain changes can make your computer work incorrectly.
NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not be displayed.
NOTE: Before you change BIOS Setup program, it is recommended that you write down the BIOS Setup program screen information for future reference.
Use the BIOS Setup program for the following purposes:
● Get information about the hardware installed in your computer, such as the amount of RAM and the size of the hard drive.
● Change the system configuration information.
● Set or change a user-selectable option, such as the user password, type of hard drive installed, and enabling or disabling base devices.
Topics:
•
•
•
•
•
•
•
•
•
Clearing BIOS (System Setup) and System passwords
BIOS overview
The BIOS manages data flow between the computer's operating system and attached devices such as hard disk, video adapter, keyboard, mouse, and printer.
Boot menu
Press <F12> when the Dell logo appears to initiate a one-time boot menu with a list of the valid boot devices for the system.
Diagnostics and BIOS Setup options are also included in this menu. The devices listed on the boot menu depend on the bootable devices in the system. This menu is useful when you are attempting to boot to a particular device or to bring up the diagnostics for the system. Using the boot menu does not make any changes to the boot order stored in the BIOS.
The options are:
● UEFI Boot:
○ Windows Boot Manager
● Other Options:
○ BIOS Setup
○ BIOS Flash Update
○ Diagnostics
○ Change Boot Mode Settings
BIOS setup 17
Entering BIOS setup program
1. Turn on your computer.
2. Press F2 immediately to enter the BIOS setup program.
NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the desktop. Then, turn off your computer and try again.
Navigation keys
NOTE: For most of the System Setup options, changes that you make are recorded but do not take effect until you restart the system.
Table 18. Navigation keys
Keys
Up arrow
Down arrow
Enter
Spacebar
Tab
Navigation
Moves to the previous field.
Moves to the next field.
Selects a value in the selected field (if applicable) or follow the link in the field.
Expands or collapses a drop-down list, if applicable.
Moves to the next focus area.
NOTE: For the standard graphics browser only.
Esc Moves to the previous page until you view the main screen.
Pressing Esc in the main screen displays a message that prompts you to save any unsaved changes and restarts the system.
One time boot menu
To enter one time boot menu , turn on your computer, and then press F12 immediately.
NOTE: It is recommended to shutdown the computer if it is on.
The one-time boot menu displays the devices that you can boot from including the diagnostic option. The boot menu options are:
● Removable Drive (if available)
● STXXXX Drive (if available)
NOTE: XXX denotes the SATA drive number.
● Optical Drive (if available)
● SATA Hard Drive (if available)
● Diagnostics
The boot sequence screen also displays the option to access the System Setup screen.
System setup options
NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not appear.
18 BIOS setup
.
General options
Table 19. General
Option
System Information
Boot Sequence
Advanced Boot Options
UEFI Boot Path Security
Date/Time
Description
Displays the following information:
● System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag,
Ownership Date, Manufacture Date, and the Express Service Code .
● Memory Information: Displays Memory Installed, Memory Available, Memory Speed,
Memory Channel Mode, Memory Technology, DIMM 1 Size, , and DIMM 2 Size .
● PCI Information: Displays Slot1_M.2, Slot2_M.2
● Processor Information: Displays Processor Type, Core Count, Processor ID, Current
Clock Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache,
Processor L3 Cache, HT Capable, and 64-Bit Technology.
● Device Information: Displays SATA-0, SATA 1, , , M.2 PCIe SSD-0, LOM MAC
Address, Video Controller, Audio Controller, Wi-Fi Device, and Bluetooth Device.
Allows you to specify the order in which the computer attempts to find an operating system from the devices specified in this list.
Allows you to select the Enable Legacy Option ROMs option, when in UEFI boot mode. By default, this option is selected.
● Enable Legacy Option ROMs—Default
● Enable Attempt Legacy Boot
This option controls whether or not the system will prompt the user to enter the Admin password when booting a UEFI boot path from the F12 Boot Menu.
Allows you to set the date and time settings. Changes to the system date and time take effect immediately.
System information
Table 20. System Configuration
Option Description
Integrated NIC Allows you to control the on-board LAN controller. The option ‘Enable UEFI Network Stack’ is not selected by default. The options are:
● Disabled
● Enabled
● Enabled w/PXE (default)
NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not appear.
SATA Operation
Drives
Smart Reporting
USB Configuration
Allows you to configure the operating mode of the integrated hard drive controller.
● Disabled = The SATA controllers are hidden
● AHCI = SATA is configured for AHCI mode
● RAID ON = SATA is configured to support RAID mode (selected by default)
Allows you to enable or disable the various drives on-board:
● SATA-0 (enabled by default)
● SATA-1 (enabled by default)
● M.2 PCIe SSD-0 (enabled by default)
This field controls whether hard drive errors for integrated drives are reported during system startup. The Enable Smart Reporting option is disabled by default.
Allows you to enable or disable the integrated USB controller for:
● Enable USB Boot Support
BIOS setup 19
Table 20. System Configuration (continued)
Option Description
● Enable Front USB Ports
● Enable Rear USB Ports
All the options are enabled by default.
Front USB Configuration
Rear USB Configuration
USB PowerShare
Audio
Allows you to enable or disable the front USB ports. All the ports are enabled by default.
Allows you to enable or disable the back USB ports. All the ports are enabled by default.
This option allows you to charge the external devices, such as mobile phones, music player.
This option is disabled by default.
Allows you to enable or disable the integrated audio controller. The option Enable Audio is selected by default.
● Enable Microphone
● Enable Internal Speaker
Both the options are selected by default.
Dust Filter Maintenance Allows you to enable or disable BIOS messages for maintaining the optional dust filter installed in your computer. BIOS will generate a pre-boot reminder to clean or replace the dust filter based on the interval set. The option Disabled is selected by default.
● Disabled
● 15 days
● 30 days
● 60 days
● 90 days
● 120 days
● 150 days
● 180 days
Video screen options
Table 21. Video
Option
Primary Display
Description
Allows you to select the primary display when multiple controllers are available in the system.
● Auto (default)
● Intel HD Graphics
NOTE: If you do not select Auto, the on-board graphics device will be present and enabled.
Security
Table 22. Security
Option
Admin Password
System Password
Internal HDD-0 Password
Strong Password
Password Configuration
Description
Allows you to set, change, and delete the admin password.
Allows you to set, change, and delete the system password.
Allows you to set, change, and delete the computer’s internal HDD.
This option lets you enable or disable strong passwords for the system.
Allows you to control the minimum and maximum number of characters allowed for a administrative password and the system password. The range of characters is between 4 and 32.
20 BIOS setup
Table 22. Security (continued)
Option
Password Bypass
Description
This option lets you bypass the System (Boot) Password and the internal HDD password prompts during a system restart.
● Disabled — Always prompt for the system and internal HDD password when they are set.
This option is disabled by default.
● Reboot Bypass — Bypass the password prompts on Restarts (warm boots).
NOTE: The system will always prompt for the system and internal HDD passwords when powered on from the off state (a cold boot). Also, the system will always prompt for passwords on any module bay HDDs that may be present.
Password Change
UEFI Capsule Firmware
Updates
TPM 2.0 Security
Computrace
Chassis Intrusion
Admin Setup Lockout
Master Password Lockout
SMM Security Mitigation
This option lets you determine whether changes to the System and Hard Disk passwords are permitted when an administrator password is set.
Allow Non-Admin Password Changes - This option is enabled by default.
This option controls whether this system allows BIOS updates via UEFI capsule update packages. This option is selected by default. Disabling this option will block BIOS updates from services such as Microsoft Windows Update and Linux Vendor Firmware Service
(LVFS)
Allows you to control whether the Trusted Platform Module (TPM) is visible to the operating system.
● TPM On (default)
● Clear
● PPI Bypass for Enable Commands
● PPI Bypass for Disable Commands
● PPI Bypass for Clear Commands
● Attestation Enable (default)
● Key Storage Enable (default)
● SHA-256 (default)
Choose any one option:
● Disabled
● Enabled (default)
This field lets you Activate or Disable the BIOS module interface of the optional Computrace
Service from Absolute Software. Enables or disables the optional Computrace service designed for asset management.
● Deactivate
● Disable
● Activate - This option is selected by default.
This field controls the chassis intrusion feature.
Choose any one of the option:
● Disabled (default)
● Enabled
● On-Silent
Allows you to prevent users from entering Setup when Admin password is set. This option is not set by default.
Allows you to disable master password support Hard Disk passwords need to be cleared before the settings can be changed. This option is not set by default.
Allows you to enable or disable additional UEFI SMM Security Mitigation protections. This option is not set by default.
BIOS setup 21
Secure boot options
Table 23. Secure Boot
Option
Secure Boot Enable
Secure Boot Mode
Expert key Management
Description
Allows you to enable or disable Secure Boot feature
● Secure Boot Enable
This option is not selected by default.
Allows you to modify the behavior of Secure Boot to allow evaluation or enforcement of
UEFI driver signatures.
● Deployed Mode (default)
● Audit Mode
Allows you to manipulate the security key databases only if the system is in Custom Mode.
The Enable Custom Mode option is disabled by default. The options are:
● PK (default)
● KEK
● db
● dbx
If you enable the Custom Mode , the relevant options for PK, KEK, db, and dbx appear.
The options are:
● Save to File - Saves the key to a user-selected file
● Replace from File - Replaces the current key with a key from a user-selected file
● Append from File - Adds a key to the current database from a user-selected file
● Delete - Deletes the selected key
● Reset All Keys - Resets to default setting
● Delete All Key s- Deletes all the keys
NOTE: If you disable the Custom Mode, all the changes made will be erased and the keys will restore to default settings.
Intel Software Guard Extensions options
Table 24. Intel Software Guard Extensions
Option
Intel SGX Enable
Enclave Memory Size
Description
This field specifies you to provide a secured environment for running code/storing sensitive information in the context of the main OS.
Click one of the following options:
● Disabled
● Enabled
● Software controlled —Default
This option sets SGX Enclave Reserve Memory Size
Click one of the following options:
● 32 MB
● 64 MB
● 128 MB —Default
22 BIOS setup
Performance
Table 25. Performance
Option
Multi Core Support
Intel SpeedStep
C-States Control
Intel TurboBoost
Hyper-Thread Control
Description
This field specifies whether the process has one or all cores enabled. The performance of some applications improves with the additional cores.
● All —Default
● 1
● 2
● 3
Allows you to enable or disable the Intel SpeedStep mode of processor.
● Enable Intel SpeedStep
This option is set by default.
Allows you to enable or disable the additional processor sleep states.
● C states
This option is set by default.
Allows you to enable or disable the Intel TurboBoost mode of the processor.
● Enable Intel TurboBoost
This option is set by default.
Allows you to enable or disable the HyperThreading in the processor.
● Disabled
● Enabled —Default
Power management
Table 26. Power Management
Option Description
AC Recovery
Enable Intel Speed Shift
Technology
Auto On Time
Determines how the system responds when AC power is re-applied after a power loss. You can set the AC Recovery to:
● Power Off
● Power On
● Last Power State
This option is Power Off by default.
Allows you to enable or disable Intel Speed Shift Technology support. The option Enable
Intel Speed Shift Technology is set by default.
Sets time to automatically turn on the computer. Time is kept in standard 12-hour format
(hour:minutes:seconds). Change the startup time by typing the values in the time and
AM/PM fields.
NOTE: This feature does not work if you turn off your computer using the switch on a power strip or surge protector or if Auto Power is set to disabled .
Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled.
● Disabled
BIOS setup 23
Table 26. Power Management (continued)
Option Description
● Enabled in S5 only
● Enabled in S4 and S5
This option is Enabled in S4 and S5 by default.
USB Wake Support
Wake on LAN/WWAN
Block Sleep
Allows you to enable the USB devices to wake the computer from standby mode. The option
"Enable USB Wake Support" is selected by default
This option allows the computer to power up from the off state when triggered by a special
LAN signal. This feature only works when the computer is connected to AC power supply.
● Disabled - Does not allows the system to power on by special LAN signals when it receives a wake-up signal from the LAN or wireless LAN.
● LAN or WLAN - Allows the system to be powered on by special LAN or wireless LAN signals.
● LAN Only - Allows the system to be powered on by special LAN signals.
● LAN with PXE Boot - A wakeup packet sent to the system in either the S4 or S5 state, that will cause the system to wake-up and immediately boot to PXE.
● WLAN Only - Allows the system to be powered on by special WLAN signals.
This option is Disabled by default.
Allows you to block entering to sleep (S3 state) in OS environment. This option is disabled by default.
Post behavior
Table 27. POST Behavior
Option
Numlock LED
Keyboard Errors
Fast Boot
Extend BIOS POST Time
Full Screen Logo
Warnings and Errors
Description
Allows you to enable or disable the Numlock feature when your computer starts. This option is enabled by default.
Allows you to enable or disable the keyboard error reporting when the computer starts. The option Enable Keyboard Error Detection is enabled by default.
This option can speed up the boot process by bypassing some compatibility steps:
● Minimal — The system boots quickly, unless the BIOS has been updated, memory changed, or the previous POST did not complete.
● Thorough — The system does not skip any steps in the boot process.
● Auto — This allows the operating system to control this setting (this works only when the operating system supports Simple Boot Flag).
This option is set to Thorough by default.
This option creates an additional pre-boot delay.
● 0 seconds (default)
● 5 seconds
● 10 seconds
This option will display full screen logo if your image match screen resolution. The option
Enable Full Screen Logo is not set by default.
This option causes the boot process to only pause when warning or errors are detected.
Choose any one of the option:
● Prompt on Warnings and Errors
● Continue on Warnings
● Continue on Warnings and Errors
24 BIOS setup
Virtualization support
Table 28. Virtualization Support
Option
Virtualization
Description
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by the Intel Virtualization technology.
● Enable Intel Virtualization Technology
This option is set by default.
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided by the Intel Virtualization technology for direct I/O.
● Enable VT for Direct I/O
This option is set by default.
Wireless options
Table 29. Wireless
Option
Wireless Device Enable
Description
Allows you to enable or disable the internal wireless devices.
The options are:
● WLAN/WiGig
● Bluetooth
All the options are enabled by default.
Maintenance
Table 30. Maintenance
Option Description
Service Tag
Displays the service tag of your computer.
Asset Tag
Allows you to create a system asset tag if an asset tag is not already set.
This option is not set by default.
SERR Messages
BIOS Downgrade
Controls the SERR message mechanism. This option is set by default. Some graphics cards require that the SERR message mechanism be disabled.
Allows you to flash previous revisions of the system firmware.
● Allow BIOS Downgrade
This option is set by default.
Bios Recovery
First Power On Date
BIOS Recovery from Hard Drive —This option is set by default. Allows you to recover the corrupted BIOS from a recovery file on the HDD or an external USB key.
BIOS Auto-Recovery — Allows you to recover the BIOS automatically.
NOTE: BIOS Recovery from Hard Drive field should be enabled.
Always Perform Integrity Check —Performs integrity check on every boot.
Allows you the set Ownership date. The option Set Ownership Date is not set by default.
BIOS setup 25
System logs
Table 31. System Logs
Option
BIOS events
Description
Allows you to view and clear the System Setup (BIOS) POST events.
Advanced configuration
Table 32. Advanced configuration
Option Description
ASPM Allows you to set the ASPM level.
● Auto (default) - There is handshaking between the device and PCI Express hub to determine the best ASPM mode supported by the device
● Disabled - ASPM power management is turned off at all time
● L1 Only - ASPM power management is set to use L1
SupportAssist System Resolution
Option
Auto OS
Recovery
Threshold
SupportAssist
OS Recovery
Description
Allows you to control the automatic boot flow for SupportAssist System. Options are:
● Off
● 1
● 2 (Enabled by default)
● 3
Allows you to recover the SupportAssist OS Recovery (Disabled by default)
Updating the BIOS
Updating the BIOS in Windows
CAUTION: If BitLocker is not suspended before updating the BIOS, the next time you reboot the system it will not recognize the BitLocker key. You will then be prompted to enter the recovery key to progress and the system will ask for this on each reboot. If the recovery key is not known this can result in data loss or an unnecessary operating system re-install. For more information on this subject, see Knowledge Article: https:// www.dell.com/support/article/sln153694
1. Go to www.dell.com/support .
2. Click Product support . In the Search support box, enter the Service Tag of your computer, and then click Search .
NOTE: If you do not have the Service Tag, use the SupportAssist feature to automatically identify your computer. You can also use the product ID or manually browse for your computer model.
3. Click Drivers & Downloads . Expand Find drivers .
4. Select the operating system installed on your computer.
5. In the Category drop-down list, select BIOS .
6. Select the latest version of BIOS, and click Download to download the BIOS file for your computer.
7. After the download is complete, browse the folder where you saved the BIOS update file.
8. Double-click the BIOS update file icon and follow the on-screen instructions.
26 BIOS setup
For more information, see knowledge base article 000124211 at www.dell.com/support .
Updating the BIOS in Linux and Ubuntu
To update the system BIOS on a computer that is installed with Linux or Ubuntu, see the knowledge base article 000131486 at www.dell.com/support .
Updating the BIOS using the USB drive in Windows
CAUTION: If BitLocker is not suspended before updating the BIOS, the next time you reboot the system it will not recognize the BitLocker key. You will then be prompted to enter the recovery key to progress and the system will ask for this on each reboot. If the recovery key is not known this can result in data loss or an unnecessary operating system re-install. For more information on this subject, see Knowledge Article: https:// www.dell.com/support/article/sln153694
1. Follow the procedure from step 1 to step 6 in
to download the latest BIOS setup program file.
2. Create a bootable USB drive. For more information, see the knowledge base article 000145519 at www.dell.com/support .
3. Copy the BIOS setup program file to the bootable USB drive.
4. Connect the bootable USB drive to the computer that needs the BIOS update.
5. Restart the computer and press F12 .
6. Select the USB drive from the One Time Boot Menu .
7. Type the BIOS setup program filename and press Enter .
The BIOS Update Utility appears.
8. Follow the on-screen instructions to complete the BIOS update.
Updating the BIOS from the F12 One-Time boot menu
Update your computer BIOS using the BIOS update.exe file that is copied to a FAT32 USB drive and booting from the F12
One-Time boot menu.
CAUTION: If BitLocker is not suspended before updating the BIOS, the next time you reboot the system it will not recognize the BitLocker key. You will then be prompted to enter the recovery key to progress and the system will ask for this on each reboot. If the recovery key is not known this can result in data loss or an unnecessary operating system re-install. For more information on this subject, see Knowledge Article: https:// www.dell.com/support/article/sln153694
BIOS Update
You can run the BIOS update file from Windows using a bootable USB drive or you can also update the BIOS from the F12
One-Time boot menu on the computer.
Most of the Dell computers built after 2012 have this capability, and you can confirm by booting your computer to the F12
One-Time Boot Menu to see if BIOS FLASH UPDATE is listed as a boot option for your computer. If the option is listed, then the
BIOS supports this BIOS update option.
NOTE: Only computers with BIOS Flash Update option in the F12 One-Time boot menu can use this function.
Updating from the One-Time boot menu
To update your BIOS from the F12 One-Time boot menu, you need the following:
● USB drive formatted to the FAT32 file system (key does not have to be bootable)
● BIOS executable file that you downloaded from the Dell Support website and copied to the root of the USB drive
● AC power adapter that is connected to the computer
● Functional computer battery to flash the BIOS
Perform the following steps to perform the BIOS update flash process from the F12 menu:
CAUTION: Do not turn off the computer during the BIOS update process. The computer may not boot if you turn off your computer.
BIOS setup 27
1. From a turn off state, insert the USB drive where you copied the flash into a USB port of the computer.
2. Turn on the computer and press F12 to access the One-Time Boot Menu, select BIOS Update using the mouse or arrow keys then press Enter.
The flash BIOS menu is displayed.
3. Click Flash from file .
4. Select external USB device.
5. Select the file and double-click the flash target file, and then click Submit .
6. Click Update BIOS . The computer restarts to flash the BIOS.
7. The computer will restart after the BIOS update is completed.
System and setup password
Table 33. System and setup password
Password type
System password
Setup password
Description
Password that you must enter to log in to your system.
Password that you must enter to access and make changes to the BIOS settings of your computer.
You can create a system password and a setup password to secure your computer.
CAUTION: The password features provide a basic level of security for the data on your computer.
CAUTION: Anyone can access the data that is stored on your computer if it is not locked and left unattended.
NOTE: System and setup password feature is disabled.
Assigning a system setup password
You can assign a new System or Admin Password only when the status is in Not Set .
To enter the system setup, press F12 immediately after a power-on or reboot.
1. In the System BIOS or System Setup screen, select Security and press Enter.
The Security screen is displayed.
2. Select System/Admin Password and create a password in the Enter the new password field.
Use the following guidelines to assign the system password:
● A password can have up to 32 characters.
● At least one special character: ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | }
● Numbers 0 through 9.
● Upper case letters from A to Z.
● Lower case letters from a to z.
3. Type the system password that you entered earlier in the Confirm new password field and click OK .
4. Press Esc and save the changes as prompted by the pop-up message.
5. Press Y to save the changes.
The computer restarts.
Deleting or changing an existing system setup password
Ensure that the Password Status is Unlocked (in the System Setup) before attempting to delete or change the existing
System and/or Setup password. You cannot delete or change an existing System or Setup password, if the Password Status is
Locked.
To enter the System Setup, press F12 immediately after a power-on or reboot.
1. In the System BIOS or System Setup screen, select System Security and press Enter.
The System Security screen is displayed.
28 BIOS setup
2. In the System Security screen, verify that Password Status is Unlocked .
3. Select System Password , update, or delete the existing system password, and press Enter or Tab.
4. Select Setup Password , update, or delete the existing setup password, and press Enter or Tab.
NOTE: If you change the System and/or Setup password, reenter the new password when prompted. If you delete the
System and/or Setup password, confirm the deletion when prompted.
5. Press Esc and a message prompts you to save the changes.
6. Press Y to save the changes and exit from System Setup.
The computer restarts.
Clearing BIOS (System Setup) and System passwords
To clear the system or BIOS passwords, contact Dell technical support as described at www.dell.com/contactdell .
NOTE: For information on how to reset Windows or application passwords, refer to the documentation accompanying
Windows or your application.
BIOS setup 29
5
Software
This chapter details the supported operating systems along with instructions on how to install the drivers.
Topics:
•
•
•
•
•
•
•
•
•
Supported operating systems
Table 34. Supported operating systems
Supported operating systems
Windows operating system
Other
Description
● Microsoft Windows 10 Home (64-bit)
● Microsoft Windows 10 Pro (64-bit)
● Microsoft Windows 10 Pro National Academic (64-bit)
● Microsoft Windows 10 Home National Academic (64-bit)
● Ubuntu 16.04 SP1 LTS (64-bit)
● Neokylin v6.0 SP4 (China only)
Downloading Windows drivers
1. Turn on the .
2. Go to Dell.com/support .
3. Click Product Support , enter the Service Tag of your , and then click Submit .
NOTE: If you do not have the Service Tag, use the auto detect feature or manually browse for your model.
4. Click Drivers and Downloads .
5. Select the operating system installed on your .
6. Scroll down the page and select the driver to install.
7. Click Download File to download the driver for your .
8. After the download is complete, navigate to the folder where you saved the driver file.
9. Double-click the driver file icon and follow the instructions on the screen.
Network adapter drivers
Verify if the Network adapter drivers are already installed in the system.
30 Software
Audio drivers
Verify if the audio drivers are already installed in the computer.
Display adapter
Verify if the display adapter drivers are already installed in the system.
Security drivers
Verify if the security drivers are already installed in the system.
Storage controller
Verify if the storage control drivers are already installed in the system.
Software 31
System device drivers
Verify if the system device drivers are already installed in the system.
32 Software
Software 33
Other device drivers
Verify if the following drivers are already installed in the system.
Universal Serial Bus Controller
Software components
Ports (COM and LPT)
Mice and other pointing devices
Firmware
34 Software
6
Getting help
Topics:
•
Contacting Dell
NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog.
Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:
1. Go to Dell.com/support .
2. Select your support category.
3. Verify your country or region in the Choose a Country/Region drop-down list at the bottom of the page.
4. Select the appropriate service or support link based on your need.
Getting help 35
advertisement
Key Features
- Compact and space-saving design
- Powerful performance with Intel Core processors
- Robust security features with TPM 2.0 and Dell Data Protection
- Versatile connectivity options with multiple ports and connectors
- Energy-efficient design with ENERGY STAR certification
- Quiet operation for a comfortable work environment
Related manuals
Frequently Answers and Questions
What type of processor does the Dell OptiPlex 3060 Micro have?
How much memory can the Dell OptiPlex 3060 Micro support?
What storage options are available for the Dell OptiPlex 3060 Micro?
What ports and connectors does the Dell OptiPlex 3060 Micro have?
What security features does the Dell OptiPlex 3060 Micro have?
Is the Dell OptiPlex 3060 Micro energy-efficient?
advertisement