- Entertainment & hobby
- Musical instruments
- Guitars
- Guitar accessories
- Harley Benton
- 522031
- User Guide
Harley Benton 522031 Binary User Guide
Add to my manuals1 Pages
Harley Benton 522031 is a dual effects pedal for electric guitars that combines a versatile metal distortion module with a simple and intuitive analog noise gate. The distortion module offers a wide gain range, scoop-tone mids, and a 2-band EQ for precise tone shaping. The noise gate module features an adjustable threshold control for effective noise reduction. The pedal can be powered by a 9 V power adapter (not included) and features true bypass when powered off and buffer bypass when connected to a power supply.
advertisement
Binary
Quick Start Guide
This quick start guide contains important information on the safe operation of the product. Read and follow the safety advice and instructions given. Retain the quick start guide for future reference. If you pass the product on to others please include this quick start guide.
Safety instructions
Intended use
This device is intended for use as effects pedal for electric guitars. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts from the product. They could swallow the pieces and choke!
Where to use the product
Never use the product
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• at locations where the unit can become wet
General handling
• To prevent damage, never use force when handling the product.
• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents.
EN
Features
• Dual effects pedal for electric guitars
• The effect modules A and B can be used simultaneously or individually and in any order
• Versatile metal distortion with wide gain range, scoop-tone mids and 2-band EQ control (effect module A)
• Analogue noise gate with simple and intuitive settings (effect module B)
• True Bypass when device is powered off
• Buffer Bypass when device is connected to power supply
• 3-way switch for effects order
• Foot switches with LED indicators
• Power supply via 9 V power adapter (not included, suitable optional power adapter: item no. 409939, no battery operation)
Operating elements
1 9 V
2 LOW
3 LEVEL
4 HIGH
Socket for connecting a power adapter (not included)
Rotary control for adjusting the bass frequencies of the
Distortion effect
Rotary contol for adjusting the volume level of the Distortion effect
Rotary control for adjusting the high frequencies of the
Distortion effect
Rotary control for adjusting the mid frequencies of the 5 RAGE
6 INPUT
Distortion effect
1/4" jack socket for connecting instruments
7 Distortion Foot switch for switching on/off the Distortion effect
8 Noisegate Foot switch for switching on/off the Noise Gate
9 OUTPUT 1/4" jack socket for connecting an amplifier
10 THRESHOLD Rotary control for adjusting the threshold of the Noise Gate
11
A – B
A or B
B – A
12 Soft/Hard
Switch for selecting the operation mode
The Distortion effect and the Noise Gate can simultaneously be enabled. The signal will go through the Distortion effect and then to the Noise Gate.
Either the Distortion effect or the Noise Gate can be enabled.
The Noise Gate and the Distortion effect can simultaneously be enabled. The signal will go through the Noise Gate and then to the Distortion effect.
Switch to toggle the sound mode of the Noise Gate
Soft : soft sound when decaying the guitar signal
Hard : hard sound when decaying the guitar signal
,
+
*
)
-
Soft Hard
ö # $
THRESHOLD
B
BINARY
BY
LOW
LEVEL
HIGH
%
&
A – B
A or B
B – A
RAGE
'
A
(
Noisegate Distortion
Technical specifications
• Input connections
• Output connections
• Power supply
• Power adapter
1/4" jack socket
Socket for connecting a power adapter
1/4" jack socket
External power adapter, 100 - 240 V ~ 50/60 Hz
Current draw 240 mA
Operating voltage 9 V
Polarity centre negative
• Dimensions (W × H × D)
• Weight
• Ambient conditions
95 mm × 37 mm × 120 mm
322 g
Temperature range 0 °C...40 °C
Relative humidity 20 %...80 %
(non-condensing)
For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equipment Directive
(WEEE) in its currently valid version. Do not dispose of your old device with your normal household waste. Dispose of this product through an approved waste disposal firm or through your local waste facility. Comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [email protected]
DocID: 522031_10.10.2022
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project