ALDI WORKZONE User Manual
ALDI WorkZone AIR FORCE is a portable air compressor designed for inflating tires and other items, cleaning and blowing out spaces, and using with compressed-air driven tools like paint spray guns. It features a quick-lock coupling for easy tool attachment, a pressure gauge for accurate inflation, and a variety of adapters for different valve types.
Advertisement
Advertisement
User Manual Contents Utilisation04 Explanation of symbols Introduction Layout 08 09 Scope of delivery PORTABLE AIR COMPRESSOR Intended use 09 10 Safety information 10 Before starting up 14 Attachment and operation AUS ALDI guarantees that our exclusive brand products are developed to our stringent quality specifications. If you are not entirely satisfied with this product, please return it to your nearest ALDI store within 60 days from the date of purchase for a full refund or replacement, or take advantage of our after sales support by calling the supplier’s Customer Service Hotline. Technical data Troubleshooting AFTER SALES SUPPORT 1300 855 831 [email protected] MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018 17 18 Maintenance & Cleaning Storage 14 16 Electrical connection Made in China WORKZONE is a registered trademark of ALDI Stores DISTRIBUTED BY: ALDI STORES 1 SARGENTS ROAD MINCHINBURY NSW 2770 www.aldi.com.au 18 19 Transport 20 Disposal & Recycling Warranty Details 20 21 Repair and Refurbished Goods or Parts Notice 5 Original instructions 07 22 Overview 4 Utilisation 5 Pack contents/parts 6 AUS AIR FORCE Fig. 1 1 Fig. 3 3 Fig. 4 Contents of Box 5 2 6 4 C B A F G H J E D K 7 Fig. 5 Fig. 2 Fig. 6 1 1x Portable Air Compressor AIR FORCE 2 1x Cap 3 1x Ball needle 4 1x Extension nozzle 5 1x Tyre pressure gauge 6 1x Adapter for deflator valves 7 1x Valve adapter, e.g. for cycle tyre valves 8 1x Adapter for screw valves, e.g. on inflatable dinghies 9 1x Universal adapter,for valves with internal Ø of approx. 6 mm 10 1x Universal adapter,for valves with internal Ø of approx. 8 mm 11 1x Universal adapter,for valves with internal Ø of approx. 9 mm 12 1x Instruction manual 13 1x Warranty certificate Fig. 2.1 AFTER SALES SUPPORT [email protected] MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018 1300 855 831 AUS AIR FORCE Explanation of symbols Explanation of symbols The use of symbols in this manual is intended to draw your attention to possible risks. The safety symbols and the explanations that accompany them must be understood before using the device. The warnings in themselves do not remove the risks and cannot replace correct actions for preventing accidents. Read operator manual. Before any use, refer to the corresponding section in this user manual. Attention! Hot parts! Keep your distance. Wear hearing protection. Beware of electrical voltage! Caution! The equipment is remote-controlled and may start-up without warning. Prohibition: Do not open the cock before the air hose is attached. Symbol Category II: This device is equipped with dual insulation and does not need to be connected to an earthed power socket. m Attention! These operating instruction provide places concerning your safety which are marked with this indication. m Caution! Failure to follow these instructions may cause light to medium risk of injury. m Warning! Failure to follow these instructions may cause danger to life or danger of serious injuries. AFTER SALES SUPPORT 1300 855 831 7 [email protected] MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018 AUS Introduction AIR FORCE 1. Introduction Congratulations on choosing to buy a WORKZONE® product. All products brought to you by WORKZONE® are manufactured to the highest standards of performance and safety, and as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 5 Year Warranty. We hope you will enjoy using your purchase for many years to come. Note: According to the applicable product liability law the manufacturer of this device is not liable for damages which arise on or in connection with this device in case of: • improper handling • non-compliance with the instructions for use • repairs by a non authorised third party or inadequately trained repair technicians • installation and replacement of non-original spare parts • improper use Recommendations: Read the entire text of the operating instructions prior to the assembly and operation of the device. These operating instructions are intended to make it easier for you to get familiar with your device and fully utilise all of its functions. The operating instructions contain important notes on how to work safely, properly and economically with your machine and how to avoid dangers, save repair costs, reduce downtime, and increase the reliability and working life of the machine. In addition to the safety regulations contained herein, you must in any case comply with the applicable regulations of your country with respect to the operation of the machine. Put the operating instructions in a clear plastic folder to protect them from dirt and humidity, and store them near the machine. The instructions must be read and carefully observed by each operator prior to using the machine. Only persons who have been trained in the use of the machine and have been informed of the related dangers and risks are allowed to use the machine. The required minimum age must be met. Children are not permitted to use this equipment. In addition to the safety notes contained in the present operating instructions and the special regulations of your country, the generally recognised technical rules for the operation of portable air compressors must be observed. 8 AFTER SALES SUPPORT [email protected] MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018 1300 855 831 AUS AIR FORCE Layout / Scope of delivery 2. Layout (Fig. 1) 1 2 3 4 5 6 7 Transport handle ON/OFF switch Compressor housing Quick-lock coupling Pressure hose Power cord with power plug Integrated relief valve Accessory A B C D E F G H J K Universal adapter,for valves with internal Ø of approx. 6 mm Universal adapter,for valves with internal Ø of approx. 9 mm Cap for H, J, K Extension nozzle Valve adapter, e.g. for cycle tyre valves Ball needle Tyre pressure gauge Adapter for deflator valves Adapter for screw valves, e.g. on inflatable dinghies Universal adapter,for valves with internal Ø of approx. 8 mm 3. Scope of delivery • Open the packaging and remove the device carefully. • Remove the packaging material as well as the packaging and transport bracing (if available). • Check that the delivery is complete. • Check the device and accessory parts for transport damage. • If possible, store the packaging until the warranty period has expired. m Attention! The device and packaging materials are not toys! Children must not be allowed to play with plastic bags, film and small parts! There is a risk of swallowing and suffocation! AFTER SALES SUPPORT 1300 855 831 9 [email protected] MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018 AUS Intended use / Safety information AIR FORCE 4. Intended use The compressor is designed to generate compressed air for compressed-air driven tools which can be driven with an air volume of up to approx. 180 l/min (e.g. tyre inflator, blow-out pistol and paint spray gun). Due to the limited air output it is not possible to use the compressor to drive tools with very high air consumption (for example orbital sanders, die grinders and hammer screwdrivers). The machine is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this. Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the equipment is used in commercial, trade or industrial applications or for equivalent purposes. 5. Safety information m Attention! While using the machine some safety precautions must be observed to minimise the risk of injuries and damage. Read the directions with due care. If you give the equipment to any other person, give them these operating instructions as well. We assume no liability for injuries or damages which are a results of non-compliance with this manual and its safety notes. GENERAL SAFETY INFORMATION m Attention! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The term “power tool” in the warnings refers to your mains operated (corded) power tool or battery-operated (cordless) power tool. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE. 1) Work area safety a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 10 AFTER SALES SUPPORT [email protected] MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018 1300 855 831 AUS AIR FORCE Safety information 2) Electrical safety a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk of electric shock. e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. AFTER SALES SUPPORT 1300 855 831 11 [email protected] MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018 AUS Safety information AIR FORCE h) This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. i) Children should be supervised to ensure that they do not play with the appliance. 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5) Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 12 AFTER SALES SUPPORT [email protected] MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018 1300 855 831 AUS AIR FORCE Safety information/ ADDITIONAL SAFETY INSTRUCTIONS Safety instructions for working with compressed air and blasting guns • The compressor pump and lines can become very hot during operation. Touching these parts will burn you. • The air which is sucked in by the compressor must be kept free of impurities that could cause fires or explosions in the compressor pump. • When releasing the hose coupling, hold the hose coupling piece with your hand. This way, you can protect yourself against injury from the rebounding hose. • Wear safety goggles when working with the blow-out pistol. Foreign bodies or blown off parts can easily cause injuries. • Do not blow at people with the blow-out pistol and do not clean clothes while being worn. Risk of injury! Safety information for paint spraying • Do not process any paints or solvents with a flash point below 55° C. There is a risk of explosion! • Do not heat up paints or solvents. There is a risk of explosion! • If hazardous liquids are processed, wear protective filter units (face guards). Also, adhere to the safety information provided by the manufacturers of such liquids. • The details and designations of the Ordinance on Hazardous Substances, which are displayed on the outer packaging of the processed material, must be observed. • Additional protective measures are to be undertaken if necessary, particularly the wearing of suitable clothing and masks. • Do not smoke during the spraying process and/or in the work area. There is a risk of explosion! Paint vapors are easily combustible. • Never set up or operate the equipment in the vicinity of a fire place, open lights or sparking machines. • Do not store or eat food and drink in the work area. Paint vapors are harmful to your health. • The work area must exceed 30 m3 and sufficient ventilation must be ensured during spraying and drying. Do not spray against the wind. Always adhere to the regulations of the local police authority when spraying combustible or hazardous materials. • Do not process media such as white spirit, butyl alcohol and methylene chloride with the PVC pressure hose. These media will destroy the pressure hose. DO NOT LOSE THESE SAFETY INSTRUCTIONS AFTER SALES SUPPORT 1300 855 831 13 [email protected] MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018 AUS Before starting up / Attachment and operation AIR FORCE 6. Before starting up m Attention! Before you connect the equipment to the mains supply make sure that the data on the rating plate are identical to the mains data. • Check the equipment for damage which may have occurred in transit. Report any damage immediately to the transport company which was used to deliver the compressor. • Install the compressor near the point of consumption. • Avoid long air lines and supply lines (extension cables). • Make sure that the intake air is dry and dustfree. • Do not install the compressor in a damp or wet room. • The compressor may only be used in suitable rooms (with good ventilation and an ambient temperature from +5 °C to 40 °C). There must be no dust, acids, vapors, explosive gases or inflammable gases in the room. • The compressor is designed to be used in dry rooms. It is prohibited to use the compressor in areas where work is conducted with sprayed water. 7. Attachment and operation m Attention! You must fully assemble the appliance before using it for the first time! MAINS CONNECTION • The compressor is equipped with a mains cable with shock-proof plug. This can be connected to any 220 - 240 V ~ 50 Hz shock-proof socket. • Before you use the machine, make sure that the mains voltage is the same as the operating voltage (see the rating plate). • Long supply cables, extensions, cable reels etc. cause a drop in voltage and can impede motor start-up. • At low temperatures below +5°C, sluggishness may make starting difficult or impossible. COMPRESSED AIR HOSE WITH QUICK-LOCK COUPLING (4) Connecting: Insert the nipple of the air tool into the quick-lock coupling (4), the sleeve will spring forward automatically. (Fig. 2) Disconnecting: Pull back the sleeve and remove the tool. (Fig. 2.1) Attention! When releasing the quick-lock coupling, be sure to hold the coupling piece to protect yourself against injury from the rebounding hose. 14 AFTER SALES SUPPORT [email protected] MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018 1300 855 831 AUS AIR FORCE Attachment and operation TYRE PRESSURE GAUGE WITH ADAPTERS (Fig. 1 / Item G) Working pressure in bar: 0-8 Range of applications: The tyre pressure gauge allows you to inflate car tyres easily and exactly. Use the pressure gauge to check the tyre pressure. If the tyre pressure is too high, you can reduce the pressure with the integrated relief valve (7). The tyre pressure gauge comes with a valve adapter for car tyre valves. IMPORTANT! The pressure gauge is not calibrated! Please check the tyre pressure immediately after filling with air, for example at your filling station. ON/OFF SWITCH (Fig. 1 / Item 2) To start the compressor, the switch has to be in position "I". To stop the compressor, the switch has to be in position "0". ADAPTER SET INSTRUCTIONS For information on the correct use of the adapters for the various valves, please refer to the following overview. Fitting the accessory Attach the compressed air tools to the tyre pressure gauge (G) which has to be connected to the pressure hose (5). Using the equipment as a blow-out pistol (Fig. 1 / Item D) To use the tyre pressure gauge (G) as a blow-out pistol you must first unscrew and remove the hose with the valve adapter for car tyres. Now the Extension nozzle (D) can be screwed to the tyre pressure gauge (G). Range of applications: For cleaning and blowing out hollow spaces or hard-to-reach areas, as well as for cleaning soiled equipment. The variable trigger lever allows an exact dosage of compressed air. Ball needle (Fig. 1&4 / Item F) Range of applications: For inflating balls. The ball needle (F) can be used to inflate a variety of different balls. TIP: To avoid damaging the valve, moisten the needle slightly before inserting it. AFTER SALES SUPPORT 1300 855 831 15 [email protected] MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018 AUS Attachment and operation / Technical data AIR FORCE Valve adapter (Fig. 1 / Item E) Range of applications: For Dunlop bicycle tyre valves. This Dunlop valve adapter is designed for inflating cycle tyres. For inflating car tyres, please see the tyre pressure gauge with adapters. Universal adapter, for valves with internal Ø of approx. 8 mm (Fig. 1 / Item K) Range of applications: For all valves with an internal diameter of 8 mm or more. You can use this adapter to inflate airbeds, pools or boats. TIP: Insert the adapter (K) into the valve as shown in Figure 5. Attention! The valve cap must be opened a little by being pressed together slightly. Adapter for screw valves (Fig. 1 / Item J) Range of applications: For screw valves. This adapter can be used for all conventional boats, kayaks and other large items such as pools, which are fitted with a screw valve. Vent adapter (Fig. 1 / Item H) Range of applications: For deflation valves You can find a deflation valve combined with other valves (standard valve, screw valve, etc.) on many large articles such as an inflatable mattress. Conical universal adapter (Fig. 1 / Item A&B) Range of applications: For inflating airbeds and similar. 8. Technical data Mains connection 220 - 240 V ~ 50 Hz Motor rating W 1100 Operating mode S3 15%* Compressor speed 3750 min-1 Operating pressure approx. 8 bar Theoretical intake capacity (l/min) approx. 180 Sound power level LWA 97 dB(A) Uncertainty K WA 1.93 dB Protection type IP20 Weight of the unit in kg approx. 5.3 Max. Altitude (above mean sea level) 1000 m The noise emission values were measured in accordance with EN ISO 3744. 16 AFTER SALES SUPPORT [email protected] MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018 1300 855 831 AUS AIR FORCE Technical data / Electrical connection * S3 Intermittent periodic duty A sequence of identical duty cycles, made up with a time of operation at constant load and a time at rest. When at rest, the motor is not fed. Identical duty cycles with a period at load followed by a period at no load. Running time 10 minutes; duty cycle is 15% of the running time. Wear hearing protection The effects of noise can cause a loss of hearing. 9. Electrical connection The electrical motor installed is connected and ready for operation. The connection complies with the applicable Australian standards. The customer‘s mains connection as well as the extension cable used must also comply with these regulations. Important information In the event of an overloading the motor will switch itself off. After a cool-down period (time varies) the motor can be switched back on again. Damaged electrical connection cable The insulation on electrical connection cables is often damaged. This may have the following causes: • Passage points, where connection cables are passed through windows or doors. • Kinks where the connection cable has been improperly fastened or routed. • Places where the connection cables have been cut due to being driven over. • Insulation damage due to being ripped out of the wall outlet. • Cracks due to the insulation ageing. Such damaged electrical connection cables must not be used and are life-threatening due to the insulation damage. Check the electrical connection cables for damage regularly. Make sure that the connection cable does not hang on the power network during the inspection. Electrical connection cables must comply with the applicable Australian standards and must be correctly marked. Only use connection cables with the marking „H05VV-F“. Replacement cables can only be fitted by an approved and certified electritian. If you are in any doubt please contact the help line at the foot of this page. AC motor • The mains voltage must be 220 - 240 V~ • Extension cables up to 25 m long must have a cross-section of 1.5 mm2. Connections and repairs of electrical equipment may only be carried out by an electrician. AFTER SALES SUPPORT 1300 855 831 17 [email protected] MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018 AUS Electrical connection / Troubleshooting/Maintenance&Cleaning AIR FORCE If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. Please provide the following information in the event of any enquiries: • Type of current for the motor • Machine data - type plate 10. Troubleshooting Fault Possible cause Remedy The compressor • No supply voltage. does not start. • Insufficient supply voltage. • • The compressor • starts but there is no pressure. The compres• sor starts but the tools do not • start. • Check the supply voltage, the power plug and the socket-outlet. • Make sure that the extension cable is not too long. Use an extension cable with large enough wires. Outside temperature is • Never operate with an outside too low. temperature of below +5° C. Motor is overheated. • Allow the motor to cool down. If necessary, remedy the cause of the overheating. The seals are dam• Check the seals and have any aged. damaged seals replaced by a service center. The hose connections • Check the compressed air hose have a leak. and tools and replace if necessary. A quick-lock coupling • Check the quick-lock coupling and has a leak. replace if necessary. 11. Maintenance & Cleaning m Important! Pull out the power plug before doing any cleaning and maintenance work on the equipment. Risk of injury from electric shock! m Important! Wait until the equipment has cooled down completely! Risk of burns! 18 AFTER SALES SUPPORT [email protected] MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018 1300 855 831 AUS AIR FORCE Maintenance&Cleaning / Storage m Important! Always de-pressurize the equipment before carrying out any cleaning and maintenance work! Risk of injury! To do so, use the tyre pressure gauge as a blow-out pistol and press the trigger lever until no more air escapes. 11.1 Cleaning • Keep the equipment free of dirt and dust as far as possible. Wipe the equipment with a clean cloth or blow it down with compressed air at low pressure. • We recommend that you clean the equipment immediately after you use it. • Clean the equipment regularly with a damp cloth and some soft soap. Do not use cleaning-agents or solvents; these may be aggressive to the plastic parts in the equipment. Ensure that no water can get into the interior of the equipment. • You must disconnect the hose and any spraying tools from the compressor before cleaning. Do not clean the compressor with water, solvents or the like. 12. Storage m Important! Pull out the mains plug and ventilate the equipment and all connected pneumatic tools. Switch off the compressor and make sure that it is secured in such a way that it cannot be started up again by any unauthorized person. m Important! Store the compressor only in a dry location which is not accessible to unauthorized persons. Releasing excess pressure Release the excess pressure by switching off the compressor and using the compressed air which is still left in the pressure vessel, e.g. with a compressed air tool running in idle mode or with a blow-out pistol. AFTER SALES SUPPORT 1300 855 831 19 [email protected] MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018 AUS Transport / Disposal&Recycling AIR FORCE 13. Transport The compressor is portable. To do so use the transport handle (1) shown in figure 3. 14. Disposal & Recycling The packaging protects the portable air compressor against damage during transport. Packing materials are usually chosen depending on their environmental friendliness and disposal method and can therefore be recycled. Returning the package to material circulation saves raw materials and reduces waste disposal costs. Parts of packaging (e.g. foils, styropor®) can be dangerous to children. Risk of suffocation! Keep packaging away from children and dispose of it as soon as possible. Recycle unwanted materials instead of disposing of them. All appliances and packaging should be sorted and taken to your local recycling centre to be processed in an ecological manner. 20 AFTER SALES SUPPORT [email protected] MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018 1300 855 831 PORTABLE AIR COMPRESSOR Warranty Details The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. AFTER SALES SUPPORT 1300 855 831 [email protected] MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018 5 PORTABLE AIR COMPRESSOR Repair and Refurbished Goods or Parts Notice Unfortunately, from time to time, faulty products are manufactured which need to be returned to the Supplier for repair. Please be aware that if your product is capable of retaining user-generated data (such as files stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player, games saved on a games console or files stored on a USB memory stick) during the process of repair, some or all of your stored data may be lost. We recommend you save this data elsewhere prior to sending the product for repair. You should also be aware that rather than repairing goods, we may replace them with refurbished goods of the same type or use refurbished parts in the repair process. Please be assured though, refurbished parts or replacements are only used where they meet ALDI’s stringent quality specifications. If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint. Please telephone us on 1300 855 831 or write to us at: RossMac Pty. Ltd. P.O. Box 261, Essendon North, Victoria, 3041 1300 855 831 [email protected] AFTER SALES SUPPORT 1300 855 831 [email protected] MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018 5 ">
Download
Advertisement
Key features
Portable design
Quick-lock coupling
Pressure gauge
Multiple adapters
Blow-out pistol function
Maximum operating pressure: 8 bar
Theoretical intake capacity: 180 l/min
Frequently asked questions
This compressor is suitable for tools that require an air volume of up to approximately 180 l/min, such as tire inflators, blow-out pistols, and paint spray guns.
Insert the nipple of the air tool into the quick-lock coupling, the sleeve will spring forward automatically.
Use the tyre pressure gauge to check the pressure. If the pressure is too high, you can reduce it with the integrated relief valve.