AMASE AUDIO 1028 Installation Manual

V2
Installation manual
Universal 10.1inch Deckless
Android (1028)
Are you ready to install our unit?
Let's go >>>
4 steps to install
STEP
01
Accessories
STEP
Double check if has any
missing before installation.
Check
1) Do the screen is broken ?
2) Do the accessories have missing ?
STEP Test your unit before a full
installation.
02
STEP
03
STEP
04
(Connect the power cable to your car)
Do the full installation.
Test the head unit functions.
9
1. Power cable * 1
2. GPS antenna * 1
3. USB Adapter cable *1
4. USB adapter cable *1
5. External miscrophone *1
6. Wi-Fi antenna *1
7. Disassembly tool *1
8. 15A fuse *1
9. Mounting brackets *2 with
short screws *8
2
3
STEP Test your unit before a full
installation.
02
(Connect the power cable to your car)
After you remove the factory radio, you can take out
the power cable to connect the head unit and casually
connect the screen cable to the screen, then try to turn
it on. If this part is no problem, you can do the remain
steps.
STEP
03
3. Connect those wires provided in the package like (1)
Power cable, (2) USB cable, (3) GPS antenna,
(4) Wi-fi antenna and (6) External microphone as shown.
Do the full installation.
1. Install the screen
- Push the screen into the unit with your hands like (2).
- Hold the clip of cable and lightly put one side to connect the plug
of unit and then completely connect.
(Please keep the car engine turn off when you do this step)
3
4
2
4
1
2
5
6
Wiring diagram
4. Install the screen and plug the head unit into the center
console, then place the GPS antenna and microphone as
shown. The wires are hidden in the side of pillar trim and led
to the head unit.
STEP Test the head unit functions.
04
6
(FM, SD, USB, Bluetooth, reversing, handbrake,
headlight and etc)
7
About the screen rotated features
Top right
Top left
Wire connection for the amplifier, the subwoofer
and the headset monitors
Bottom right
Bottom left
Right rotate
a little bit
Left rotate 90°C
8
9
10
11
Optional : Install a rear camera
Below is our rear camera. This will be a reference to teach
you how to connect a rear camera to our head unit.
System Initial setup
1
Set radio location
2
Set RDS
The default radio country in the unit is Europe, if you
are from other country, you need to access the "factory
mode (PW: 126) > Radio" to adjust the country.
The Radio has RDS function but this function is only
for Europe, if the clients from other countries use it, it
will affect the radio receival, so please close it.
The ASIN of this rear camera has placed in the listing.
12
13
3
Set the unit language
Please go to setting > Languages & input, then you
can add the desirable language you need.
About after sales service
Q: Do my head unit has one year maintanence?
A: Definitely yes, you will have our commitment
after you purchase.
(The maintainence period will base on the date you
make the order)
14