Amcrest IP3M-943B, IP3M-943W User Manual

Amcrest IP3M-943W / IP3M-943B
3MP ProHD Outdoor Wi-Fi Bullet Camera
User Manual
Version 1.0.4
Revised December 18th, 2018
2
Contents
Welcome .......................................................................................................................................................................... 3
Important Security Warning ............................................................................................................................................ 3
Important Safeguards and Warnings ............................................................................................................................... 3
1 Features and Specifications .......................................................................................................................................... 4
1.1 Overview .................................................................................................................................................................. 4
1.2 Features ................................................................................................................................................................... 4
2 Device Overview............................................................................................................................................................ 5
3 Connection & Installation ............................................................................................................................................. 5
3.1 Connection Guide .................................................................................................................................................... 5
3.2 Installation Guide..................................................................................................................................................... 6
4 Camera Access Setup .................................................................................................................................................... 6
4.1 Default Username and Password ............................................................................................................................ 7
4.2 How to Setup the Camera ....................................................................................................................................... 7
4.3. App Setup ............................................................................................................................................................... 7
4.4 Desktop Access Setup ............................................................................................................................................ 14
4.5 Amcrest Cloud Desktop Setup ............................................................................................................................... 15
4.6 Web Access Setup (AmcrestView.com) ................................................................................................................. 15
4.7 Remote Web Access Setup .................................................................................................................................... 16
5 Operation and Interface.............................................................................................................................................. 18
5.1. Live ........................................................................................................................................................................ 18
5.2. Cloud Storage ....................................................................................................................................................... 20
5.3 Setup ...................................................................................................................................................................... 20
5.5 Alarm ..................................................................................................................................................................... 59
6. FAQs/Troubleshooting ............................................................................................................................................... 61
Glossary of Terms........................................................................................................................................................... 62
FCC Statement................................................................................................................................................................ 63
IC Warning Statement .................................................................................................................................................... 64
Appendix A: Toxic or Hazardous Materials or Elements ................................................................................................ 65
3
Welcome
Thank you for purchasing an Amcrest camera!
Here you can find information about the camera’s features and functions, as well as information to aid in
troubleshooting.
Many of the setup and installation sections below have corresponding videos on YouTube
To access the setup videos, please go to http://amcrest.com/videos
For access to the quick start guide and other support information, go to http://amcrest.com/support
To contact Amcrest support, please do one of the following:
•
•
•
Visit http://amcrest.com/contacts and use the email form
Call Amcrest Support using one of the following numbers
Toll Free: (888) 212-7538
International Callers (Outside of US): +1-713-893-8956
USA: +1-713-893-8956
Canada: 437-888-0177
UK: 203- 769-2757
Email Amcrest Customer Support [email protected]
Important Security Warning
To keep your Amcrest camera secure and prevent unauthorized access, please make sure to follow the
steps below:
•
Always make sure that your camera has the latest firmware as listed
on www.amcrest.com/firmware-subscribe
•
Never use the default password for your camera. Always ensure that
your password is at least 810 characters long and contains a combination of
lowercase characters, uppercase characters as well as numbers.
Important Safeguards and Warnings
1．Electrical Safety
All installation and operation should conform to your local electrical safety codes.
The product must be grounded to reduce the risk of electric shock.
We assume no liability or responsibility for any fires or electrical shock caused by improper handling or
installation.
2．Transportation Security
Heavy stress, violent vibrations, and excess moisture should not occur during transportation, storage,
and installation of the device.
3．Installation
Handle the device with care. Keep the device right side up.
4
Do not apply power to the camera before completing installation.
Do not place objects on top of the camera.
4．Repair Professionals
All the examination and repair work should be done by qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or user-attempted repair.
5．Environment
The camera should be kept in a cool, dry place away from direct sunlight, flammable materials, explosive
substances, etc.
This product should be transported, stored, and used only in the specified environments as stated above.
Do not aim the camera at a strong light source, as it may cause overexposure of the picture, and may
affect the longevity of the camera’s sensors.
Ensure that the camera is in a well-ventilated area to prevent overheating.
6. Operation and Maintenance
Do not touch the camera sensor or lens directly.
To clean dust or dirt off the lens, use an air blower or a microfiber cloth.
7. Accessories
Be sure to use only the accessories recommended by manufacturer.
Before installation, please open the package and check to ensure that all the components are present.
Contact the retailer that you purchased from, or Amcrest directly if anything is broken or missing in the
package.
1 Features and Specifications
1.1 Overview
Amcrest cameras are an excellent digital surveillance product that can be useful to a wide variety of
users. The camera connects to any router and uses an internet connection to allow the user to access all
of its functionality from many internet connected devices. It’s easy to use and can be set up in a
relatively small amount of time. It has various functions such as recording, playback, and monitoring
functionality and it synchronizes video by default.
This camera adopts a high-quality design to achieve high levels of reliability and security. It can be
configured to work locally, as well as on a network. This camera works using an Ethernet/Wi-Fi
connection and interfaces with most networks through the Ethernet port of your router.
1.2 Features
This camera has the following features:
•
Network Access
This camera connects to a wide variety of routers to connect to the internet. Once setup, the
camera can be accessed remotely from a wide variety of internet connected devices, including
PCs, iPhones, iPads, Android tablets, and Android phones.
5
•
Cloud Storage Functionality
This camera can record video streams to the Amcrest Cloud service to enable long-term storage
for recordings. Amcrest Cloud also allows the user to easily find and download recorded video
for playback from any internet connected PC or Mac computer.
•
Advanced Network Protocol Support
This camera is UPnP compatible, and includes functionality for use with PPPoE, DDNS, and other
protocols to allow remote and local connection with a large variety of network hardware.
Note: There may be slight differences in functionality due to the existence of different product series.
IMPORTANT: Due to specific hardware limitations within your camera it is important to note that these
devices will not be able to automatically pan/tilt or pivot in either the app or via the web UI on a
computer. For this reason, it is imperative to make sure to mount the cameras properly and position them
as efficiently as you can to the areas you wish to monitor. All positioning actions to the camera will have to
be performed manually.
2 Device Overview
The image below is a representation of your device:
3 Connection & Installation
This section provides information about the connection and installation of your camera.
3.1 Connection Guide
The camera initially should be connected via the following method:
•
•
WiFi Connection
Ethernet Connection
6
For more information on how to connect your camera, refer to section 4, Camera Access Setup.
3.2 Installation Guide
Follow the steps and use the diagram in this section to install you WiFi camera.
Note: Prior to installation ensure that the installation environment can support at least 3 times the weight of
the camera.
1.
2.
3.
4.
5.
Attach the provided WiFi antenna to the back of the device.
Stick the installation sticker on the designated surface where the device will be installed (wall or ceiling).
Drill 3 holes through the holes on the installation sticker.
Open the accessories bag and take out the expansion bolt and insert it into the holes.
Open accessories bag and take out the screws. Tighten the 3 screws to fix the device on the installation
surface
(wall or ceiling).
6. Loosen the sunshade screw to move it around to the desired position, then tighten the screw to lock it into
place.
7. Plug in the camera to power it, using either an Ethernet or power cable.
8. Using a Philip’s head screwdriver, (not included) loosen the adjusting screw near the base of the camera.
This allows the camera to be rotated, as well as pivoted within the ball joint.
9. Adjust the device to the desired position.
10. Using a Philip’s head screwdriver, (not included) tighten the adjusting screw near the base of the camera to
lock the camera in position.
4 Camera Access Setup
This section of the guide will provide the user with information on how to setup access to the camera
through any of the following methods.
7
4.1 Default Username and Password
To login to the system for the first time, use one of the following default username/password
combinations. Once you’ve successfully logged in, it is highly recommended to change the password for
security reasons.
Username: admin
Password: admin
Note: Logging in for the first time will prompt the user to change the password to the admin account.
4.2 How to Setup the Camera
To make your experience with your camera easy and simple, we've provided multiple ways to set up, view, and operate your
camera depending on your needs. Please follow the instructions on this page to set up your camera in the way that works best
for you.
4.2.1 Setting up Your Camera for the First Time
If you are setting up your camera for the first time, or you are setting up your camera for mobile viewing, please follow the
instructions as outlined on section 4.3. Using the Amcrest View app on your smartphone or tablet, you can view your camera live
from anywhere, and access features such as taking snapshots, creating recordings, and more.
4.2.1 For Configuring Advanced Settings On Your Camera
If you would like to configure your camera to enable advanced features such as motion direction, e-mail alerts, FTP, image
adjustments, scheduling and more, please follow the instructions as outlined on section 4.4 (Desktop Access).
4.2.3 For Cloud Storage and Playback
Amcrest Cloud is our optional cloud storage and playback service which allows you to access recorded footage from any device.
We offer 4 hours of free storage for your first camera. Please follow the instructions as outlined on section 4.5 (Cloud Access) to
sign up for our Amcrest Cloud service and get 4 hours of free storage.
4.2.4 For Quick Web Access to Your Cameras
AmcrestView.com is a web portal that allows you to view your cameras and recordings quickly and easily from anywhere in the
world using a web browser. Use AmcrestView.com if you need to simply check-in at a moment's notice. If you would like to use
AmcrestView.com, please follow the instructions outlined on section 4.6 (Web Access).
4.3. App Setup
Amcrest cameras can be used on your mobile device using the following apps:
•
•
Amcrest Cloud
Amcrest View Pro
Both apps are free and available in the App Store and Google Play store. Please note, each app requires an iOS 6.0 or later
version. Android will require a 3.0 or later version OS to run these apps.
8
For purposes of this guide, we will use iOS, though both apps. The App Interface may differ slightly from the screenshots below as
updates are released. Below, you'll find instructions on how to set up your camera up on the Amcrest cloud app as well as the
Amcrest View Pro app.
4.3.1. Amcrest Cloud App Setup
Amcrest Cloud allows you to access your device from anywhere in the world. Please note, you will need an Amcrest Cloud
account to proceed with Amcrest Cloud app setup. You can register for a cloud account in the Amcrest Cloud app or from the
Amcrest Cloud website at amcrestcloud.com
•
•
•
Please make sure your camera is plugged into a power source and your Ethernet cable is connected from the camera to your
router.
Make sure your camera and mobile device are on the same network during setup.
To ensure the camera connects to the cloud, a reboot of your camera is recommended.
To add your camera onto the Amcrest Cloud app, follow these steps:
1. Download and open the Amcrest Cloud app from the App Store or Play Store
Note: Connect your mobile device to the same network that your camera is on.
2. Register for an Amcrest Cloud account. To register click on Sign Up and fill out the form to complete registration.
3. Tap on Add Camera
4. Give your camera a name (Ex. Garage, Living Room,
Kitchen, etc.) and tap Next to continue.
9
5. Scan the QR code
on the back/side/bottom of
the camera or manually enter the camera’s serial
number in the Enter camera S/N (serial number field.
Press Next to continue.
7. Set a new password for your camera. The password
must be between 8 to 32 characters long and contain
only letters and numbers. When you have finished
setting the password for your camera, enter the
password again in the Confirm Camera Password
section. Tap Next to continue.
6. If you are adding a new camera that does not have a
set password the app will automatically detect that a
new camera is being added. Tap OK to proceed.
8. If you are connecting a WiFi camera to the Amcrest
Cloud and would like to enable WiFi via the Ethernet
WiFi Setup method, tap Setup Camera WiFi.
Additionally, if you would like to skip the WiFi process
and have your WiFi camera running solely as a wired
device, tap on Skip WiFi Setup.
10
9. If you wish to enable WiFi on your WiFi camera, tap
Scan to scan and select your WiFi network from the
WiFi Network List. Enter the password for your WiFi
network onto the Password field. When the WiFi
password has been entered, tap Next to continue.
10. Confirm and adjust any needed settings for your
camera. When all settings have been confirmed, tap
Finish.
Note: For Android 8.0 and above users, you will have to enable location permissions to be able to scan for your WiFi network. For
more information about the Amcrest Cloud app and its features, visit amcrest.com/support
4.3.2. Amcrest View Pro Setup
•
•
Make sure your camera is plugged into a power source and your Ethernet cable is connected from the camera to your router.
Make sure your camera and mobile device are on the same network during setup.
1.
Download and open the Amcrest View Pro app from the App Store or Play Store.
11
2. Open the app and tap on the + symbol in the middle
2.
of the screen to begin adding your WiFi device.
4. Tap on WiFi Camera
3.
4.
3. Tap on Add Device to add a new device to your app.
5. Select your connection type, in this case, select the
left tab Set Up A New Camera On WiFi or Connect
New Device (on Android) to begin adding the device
to the app. Tap Ethernet WiFi Setup to continue.
12
5.
6. Ensure an Ethernet cable is connected from the
router to the camera and the included power adapter
is connected to the device. Allow the device to
initialize (if applicable) and press Next to continue.
6.
8. Scan the QR code
on the back/side/bottom of
the camera or manually enter the camera’s serial
number into the Enter camera S/N (serial number)
field. Press Next to continue.
7.
7. Ensure your smartphone or tablet is connected to
the same WiFi network as your camera. Tap Next to
continue.
9. Give the camera a name (e.g. Garage, Kitchen,
Living Room, etc.) and provide the username and
password for your camera. The default username and
will be admin. Tap Next to continue.
Note: You can tap on the
icon to verify the
password.
Note: Android users, tap on Scan QR Code to access the QR code reader.
13
10. Enter the WiFi Password for your WiFi network in
the Network SSID field. Press Next to continue.
11. Tap Start Live View.
Note: For Android 8.0 and above users, you will need to enable location permissions to be able to locate and scan for your WiFi
network. For more information on how to locate an SSID visit: amcrest.com/androidP
8.
12. The app will prompt you to change the password
for your camera. Enter a password between 8 and 32
characters and confirm the password. Press OK to
continue.
13. Your camera is not set up and ready for use on the
Amcrest View Pro app.
For more information about Amcrest View Pro and its functionalities visit amcrest.com/support
For more information on alternative setup methods for your camera in the Amcrest View Pro app visit the following links:
IP/Domain/DDNS App Setup: Used to establish a connection without using P2P. For more information on this setup method visit,
amcrest.com/IPDomainDDNSsetup
14
WiFi Configuration Setup: Used as a secondary option for establishing a WiFi connection to a WiFi camera. For more information
on this setup method visit, amcrest.com/wificonfig
P2P Setup: Used for setting up already connected devices to the Amcrest View Pro app. For more information on this setup
method visit, amcrest.com/p2psetup
4.4 Desktop Access Setup
Access your camera and all its features and settings on your local network using Internet Explorer,
Firefox, or Safari on Windows or Mac.
This method of accessing the camera’s interface is necessary to setup remote access. Ensure that the
following items are completed:
Note: Make sure the camera and the PC are on the same network before proceeding.
• Use one of the following web browsers: Safari, Internet Explorer, or Mozilla Firefox (Google Chrome
support in Development).
To easily connect to the camera’s interface, install and run the Amcrest IP Config tool. You can download
the IP Config software from www.amcrest.com under the “Support” tab, Apps & Software. The IP Config
tool’s interface looks like the below image:
After launching the IP Config tool, click the Refresh button to bring up the cameras on the network.
15
Double click the camera’s line item to login and connect to the camera. Once logged in, click the
icon
to open the camera’s interface in a web browser.
Log in to the camera using your login credentials (default username and password are both “admin”). If
this is your first-time logging into the camera, you will be prompted to change your password. Please
select a password that is at least 8 characters long, and one that uses a combination of uppercase letters,
lowercase letters, and numbers.
When opening the camera’s interface, the browser may prompt you to install a plugin. The plugins are
necessary for using the camera’s interface. Click install to download the plugin, and then click on the
plugin installation file to install the plugin. If the browser prompts you to allow the plugin to work on the
computer, hit Allow to ensure the plugin can run successfully.
The camera is now successfully set up for live viewing!
For quick and easy remote access on your PC or Mac, please use amcrestcloud.com (section 4.5) or
amcrestview.com (section 4.6).
To setup advanced remote access via UPnP/DDNS or Port Forwarding see section 4.7.1 and 4.7.2.
For additional assistance, please contact us at www.amcrest.com or give us a call at 1-888-212-7538.
Step by step video tutorials available at http://www.amcrest.com/videos
4.5 Amcrest Cloud Desktop Setup
Amcrest cameras can sync with Amcrest Cloud; a service that stores recorded video streams to enable
long-term storage. Amcrest Cloud also allows the user to easily find and download recorded video for
playback from any internet connected PC or Mac computer.
For more information on how to setup your camera on Amcrest Cloud on the web, visit
amcrest.com/cloudwebsetup or follow the steps provided below:
1. Connect the camera to power and wait 30 seconds for the camera to start-up and initialize.
2. Using a web browser on your PC or Mac, visit www.amcrest.com/cloud and register for a cloud
account. Once registered, click the “Add Camera” button. Select “Amcrest”, give the camera a name,
and enter the camera’s SN (located on the bottom of the camera), then click “Next”.
3. On the settings page, you can adjust optional preferences for your camera. Once settings have been
adjusted, click “Finish”. Your camera is now successfully set up for cloud access and storage.
4. View your camera live or watch recorded clips using the menu button on the top of the page. You
can also use the Amcrest Cloud app on iOS and Android to add more cameras, play recordings, and
view your camera live, from anywhere. For more information visit amcrest.com/support
5. For additional assistance, please contact us at www.amcrest.com or give us a call at 1-888-212-7538.
Step by step video tutorials available at http://www.amcrest.com/videos
4.6 Web Access Setup (AmcrestView.com)
1.
2.
3.
Connect the camera to power and wait 30 seconds for the camera to start-up and initialize.
Using Internet Explorer or Safari, go to www.AmcrestView.com and register an account. You will be required to activate
your account by e-mail (double-check your spam folder).
Once activated, download and install the plugin for your web browser. The installation of the plugin will require all web
browsers to close.
16
4.
Log in to your account. To add a camera, click the “Add Device” button. Give the camera a name, enter the UID (found on the
bottom of your camera), then enter the login details for the camera. The default username and password for the camera is
admin.
5.
Once added, the camera should appear in the device list. Click the
viewing and playback interface.
The device is now successfully setup for live viewing and playback!
6.
7.
icon next to the camera’s UID to open the live
For additional assistance, please contact us at www.amcrest.com or give us a call at 1-888-212-7538. Step by step video tutorials
available at www.amcrest.com/videos
4.7 Remote Web Access Setup
There are two main methods for setting up remote access: UPnP/DDNS, and Port Forwarding.
4.7.1 UPnP/DDNS Remote Web Access Setup
Using Universal Plug and Play (UPnP) and Dynamic Domain Name Server (DDNS) functionality is the easiest way to setup stable
remote access. For this method, your router should support the uPnP networking protocol and the protocol should be enabled.
Please refer to your router manufacturer’s documentation to learn how to enable uPnP on your router.
Below is a step-by-step walkthrough that details how to setup Amcrest cameras for Remote Web Access using UPnP and DDNS:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Login to your camera’s web interface, open the main menu then go to Setup -> Network.
Using the left hand menu, go to the Connection menu, and write down the HTTP port. It is recommended to ensure the port
number is at least 5 digits long to prevent any port conflicts. If need be, change the port to a 5 digit number that is less than
65535, note the number down, and click save before proceeding to the next step.
The system will prompt you to reset the camera. Click OK and wait for the camera to restart.
Restarting the camera may cause the device to use another IP address. Use the included IP Config tool to find the IP address as
detailed in section 4.4.
Login to your camera, open the main menu then go to Setup -> Network.
Click the Connections menu item on the left hand menu and ensure that the HTTP port has changed.
Click the DDNS menu item on the left hand menu, pick Amcrest DDNS from the drop down box, click the checkbox next to Server
Type, and then click the Save button on the bottom right.
To set a custom DDNS name, fill out the Domain Name field and click Save.
Write down the entire Domain Name field, including the white text that says .AmcrestDDNS.com
Click the UPnP menu item on the left hand menu and click the enable checkbox at the top.
While in the UPnP menu, double click the HTTP port, and change both the internal and external HTTP ports to match the number
that was used in step 2.
Uncheck the last 4 checkboxes in the PAT table on the UPnP menu.
Click apply, then exit this menu to go back to the main menu, then re-enter the UPnP menu, and ensure the UPnP status says,
“Mapping Successful”.
Open a web browser and enter in the DDNS domain name address from step 9, enter in a colon, then type the port number from
step 4 on to the end. For example, if the DDNS domain name is http://abc123456789.AmcrestDDNS.com and your HTTP Port is
33333, the URL would be http://abc123456789.AmcrestDDNS.com:33333
The browser may prompt you to install a plugin. Click install to download the plugin, and then click on the plugin installation file
to install the plugin.
If the browser prompts you to allow the plugin to work on the computer, hit Allow to ensure the plugin can run successfully.
Enter in login details into the username and password fields and click login.
17
If the process above is not working, please contact Amcrest Support via one of the following options:
Visit http://amcrest.com/contacts and use the email form
Call Amcrest Support using one of the following numbers:
Toll Free: (888) 212-7538
International Callers (Outside of US): +1-713-893-8956
USA: (888) 212-7538
Canada: 437-888-0177
UK: 203-769-2757
Email Amcrest Customer Support [email protected]
4.7.2 Port Forwarding Remote Web Access Setup
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
Port Forwarding is an alternative method to setting up remote access for Amcrest cameras. This method should only be used if
the UPnP/DDNS Remote Access method did not work.
Below is a step-by-step walkthrough that details how to setup the camera for Remote Web Access using Port Forwarding:
Login to your camera, open the main menu then go to Setup -> Network.
Open the TCP/IP settings screen.
By default, the camera has the mode set to DHCP. Ensure that DHCP is selected. The IP Address, Subnet Mask, Default Gateway,
Preferred DNS, and Alternate DNS should all be 0s if DHCP is selected.
Click Save to save these settings. This should now open the main menu.
From the main menu, go to Setup -> Network.
On the TCP/IP settings screen, the IP Address, Subnet Mask, Default Gateway, Preferred DNS, and Alternate DNS should all be
populated.
Click the radio button next to Static, to change the mode to Static.
Write down the IP Address that is currently in the IP address field.
Click the Save button.
Using the left hand menu, go to the Connection menu, and write down the TCP, UDP, and HTTP port number. It is recommended
to ensure that these port numbers are at least 5 digits long to prevent any port conflicts. If need be, change each of these port
numbers to a 5 digit number that is less than 65535, note the numbers down, and click save before proceeding to the next step.
Go to http://www.canyouseeme.org/ and check to ensure each of the port numbers specified in step 10 is open.
Write down the manufacturer name, brand, and model name for the router that the camera is connected to, and then proceed
to http://www.portforward.com on your web browser.
Open the port forwarding guide section on the left hand side menu.
Find the router brand name in the list and click it.
Find the router model number and click it.
Click the Default Guide link near the middle of the page.
This guide will help you take the step necessary to port forward on the router. Follow these steps, and then return to the camera.
Login to your camera, open the main menu then go to Setup -> Network.
Click the DDNS menu item on the left hand menu, pick QUICK DDNS from the drop down box, click the checkbox next to Server
Type, and then click the Save button on the bottom right.
To set a custom DDNS name, fill out the Domain Name field and click Save. Write down the entire Domain Name field, including
the white text that says .AmcrestDDNS.com Open a web browser and enter in the DDNS domain name address from step 21,
enter in a colon, then type the HTTP port number from step 10 on to the end. For example, if the DDNS domain name is
http://abc123456789.AmcrestDDNS.com and your HTTP Port is 33333, the URL would be
http://abc123456789.AmcrestDDNS.com:33333
Enter in login details into the username and password fields and click login.
18
•
If the process above is not working, please contact Amcrest Support via one of the following options:
Visit http://amcrest.com/contacts and use the email form
Call Amcrest Support using one of the following numbers
Toll Free: (888) 212-7538
International Callers (Outside of US): +1-713-893-8956
USA: (888) 212-7538
Canada: 437-888- 0177
UK: 203-769-2757
Email Amcrest Customer Support [email protected]
5 Operation and Interface
This section of the manual details the camera’s interface, as well as all the operations the camera can perform.
5.1. Live
The live view tab allows the user to see a live video feed from the camera. The live view tab has four main sections:
Section 1: This bar allows the user to select which stream type and which protocol they want to choose.
Section 2: The functions bar allows the user to perform different camera functions while in live mode.
See the table below for an explanation of the different functions available:
19
Button
Function Name
Zoom
Function Description
Click this button to activate the zone selection function. This allows the user
to use the mouse to select a zone to zoom in on.
Snapshot
Click this button to take a screenshot of the live feed. The picture is saved
at the path specified in Setup -> Camera -> Video -> Path.
Triple Snapshot
Click this button to take 1 screenshot per second for 3 seconds. The
pictures are saved at the path specified in Setup -> Camera -> Video ->
Path.
Manual Record
Click this button to manually record video. The video is saved at the path
specified in Setup -> Camera -> Video -> Path.
Section 3: This bar allows the user to change video settings. See the below table for an explanation of the
video settings:
Button
Function Name
Function Description
Image Adjustment
This button opens the image adjustment toolbar, which allows the user to
adjust brightness, contrast, saturation, and hue for the live feed’s picture.
Adapt/Original Size
This button allows the user to switch between displaying the original size of
the stream in its set resolution, or to adapt to the size of the monitor
display the feed is being viewed on.
Full Screen
This button allows the user to make the live feed go into full screen mode.
Double click the mouse or click the ESC button to exit full screen mode.
Width/Height Ratio
This button allows the user to change the width/height ratio for the live
feed. The options are Original and Adaptive. Original uses the aspect ratio
of the stream’s set resolution, and adaptive fits the feed to the aspect ratio
of the monitor display the feed is being viewed on.
Stream Fluency
This button allows the user to change the stream fluency. There are 3
options. Realtime reduces delay and decreases fluency, and Fluency has a
larger delay, but the video stream becomes more fluid.
Section 4: This section of the Live tab shows the picture that the camera is broadcasting. The bitrate is
shown in the top left corner, the native resolution is shown in the top right corner, the time stamp is
shown below the native resolution, and the camera type is shown in the bottom left corner.
20
5.2. Cloud Storage
The Cloud Storage tab allows the user quick access to the Amcrest Cloud website.
At this website (amcrestcloud.com) users can register for new accounts as well as view or modify existing accounts.
For more information on Amcrest Cloud visit: amcrest.com/support
5.3 Setup
The Setup tab allows the user to change different camera settings. Below is a screenshot of the setup tab:
There are 3 main sections to note in the Setup tab:
21
1.
2.
3.
Menu Bar: The menu bar is composed of menu sections, which when clicked display any menu items that fall under their
category.
Menu Items: These menu items each open a different menu that allows the user to change specific settings for the camera.
Menu Tab: These tabs open menu options for certain menu items.
5.3.1. Camera
This menu section allows the user to change different camera settings for video and to manage image profiles.
5.3.1.1 Configuration
This menu allows the user to configure image profiles for normal, day, and night usage. Below is a screenshot that shows the
Configuration tab in the Configuration menu item:
Below is an explanation for each of the fields on the Configuration tab in the Configuration menu item:
5.3.1.1.1. Picture
•
•
•
Profile: This dropdown box allows the user to select which profile to modify. The 3 options are Day,
Night, and Normal.
Brightness: This slider is used to adjust playback and recorded video window brightness. The value
ranges from 0 to 100. The default value is 50. The larger the number, the brighter the video is. When
you input the value here, the bright section and the dark section of the video will be adjusted
accordingly. You can use this function when the whole video is too dark or too bright. Please note
the video may become hazy if the value is too high. The recommended value ranges from 40 to 60.
Contrast: This slider is used to adjust playback and recorded video window contrast. The value
ranges from 0 to 100. The default value is 50. The larger the number is, the higher the contrast is.
You can use this function when the whole video brightness is OK but the contrast is not correct.
Please note the video may become hazy if the value is too low. If this value is too high, the dark
22
•
•
•
•
•
section may lack brightness while the bright section may over expose. The recommended value
ranges from 40 to 60.
Saturation: This slider is used to adjust playback and recorded video window saturation. The value
ranges from 0 to 100. The default value is 50. The larger the number, the stronger the color is. This
value has no effect on the general brightness of the whole video. The video color may become too
strong if the value is too high. For the grey part of the video, distortion may occur if the white
balance is not accurate. Please note the video may not be clear if the value is too low. The
recommended value ranges from 40 to 60.
Sharpness: This slider is used to adjust the sharpness of the video. The value ranges from 0 to 100.
The larger the value is, the clearer the edges are and vice versa. Note: The higher the value, the
higher likelihood of picture noise occurring. The default value is 50 and the recommended value
ranges from 40 to 60.
Gamma: This slider is used to adjust the gamma of the video. The larger the number, the brighter
the video is.
The default value is 50 and the recommended value ranges from 40 to 60.
Mirror: This radio button allows the user to turn the mirroring feature on or off. Turning mirroring
on will mirror the picture.
Flip: This dropdown box allows the user to flip the video feed picture. Flipping the picture is
recommended only if the camera is mounted upside down.
o Note: Due to specific limitations cameras 4MP and above will not be able to perform image
flips in 90 or 270 degree rotations.
5.3.1.1.2. Exposure
This dropdown box allows the user to select the exposure type for the video feed. The options are Auto, Low Noise, Low Motion
Blur, and Manual. When low noise is selected, an additional option to specify a gain range appears below this box. When low
motion blur is selected, an additional option to specify shutter speed appears below this box. When manual is selected,
additional options to specify a shutter speed and a gain range appear below this box.
Below is a screenshot of the exposure menu:
23
•
Profile: This dropdown box allows the user to select which profile to modify. The 3 options are Day,
Night, and Normal.
• Anti-Flicker: These radio buttons allow the user to select what type of anti-flicker technology should
be used for the video feed. The three options are 50 Hz, 60 Hz, and Outdoor. The desired option
should offset any flickering effect caused by the electrical current used in the specific area.
• Mode: This dropdown menu allows the user to modify certain exposure settings related to the
device such as, gain priority, shutter priority or setting a manual gain setting.
▪ Gain Priority - This setting will maximize the gain for the ideal exposure. Low Noise
Basically turns up the ISO to the best setting without sacrificing exposure timing.
▪ Shutter Priority - This setting will maximize the fastest shutter speed and will
sacrifice the gain in return.
▪ Manual - This setting lets you select your shutter speed and have the gain adjust
automatically. Selecting customized range will let you both the shutter speed an
adjust the gain manually.
• 3D NR: This radio button allows the user to turn the 3D Noise Reduction feature on or off.
• 3D NR Level: This slider allows the user to specify the 3D Noise Reduction level. The value ranges
from 1-100.
To reset to default settings, click the Reset Defaults button. To refresh the screen, click on Refresh. To
save the settings, click the Save button.
5.3.1.1.3. BLC Mode
This dropdown box allows the user to select Back Light Compensation. The values are Off, BLC (Auto),
WDR, and HLC. This feature should only be used in black lit environments. Below is a screenshot of this
menu:
24
•
BLC: backlight compensation: Default will use the whole image to balance the lighting settings, and
Customized will allow you to balance the lighting settings from the target area.
•
WDR: Wide Dynamic Range makes multiple scans of a scene to provide one balanced and unwashed
image that is clear for the user.
•
HLC: Highlight compensation is a feature that came out of necessity due to overexposure from strong
light sources like headlights or spotlights.
To reset to default settings, click the Reset Defaults button. To refresh the screen, click on Refresh. To
save the settings, click the Save button.
5.3.1.1.4. WB
This dropdown box allows the user to select the white balance for the video feed. The different options are Auto, Sunny, Night,
Outdoor, and Customized. Selecting customized opens a menu that allows the user to set specific red or blue values. Below is a
screenshot of this menu:
To reset to default settings, click the Reset Defaults button. To refresh the screen, click on Refresh. To save the settings, click the
Save button.
5.3.1.5. Day & Night
Used to determine when black and white mode is turned on in a dark environment. Below is a screenshot of this menu:
25
•
•
•
Color - always represents picture in color, does not use IR or black and white mode. Performs poorly in
dimly lit areas unless you are using the Starlight series cameras.
• Auto - Uses D&N Sensitivity setting to change between color mode and infrared and black and white
mode.
• Black & White - Always sets picture to black and white, however when illumination is too dark it switches
on IR mode.
Sensitivity: This option allows the user to change the Day/Night Sensitivity of the camera. The
three options are Low, Middle, and High. The higher the sensitivity, the quicker the camera will
change into another mode depending on the light levels.
D&N Delay: This dropdown box allows the user to set a delay in seconds for how long it takes to
switch between Day and Night modes. The values range from 2 seconds to 10 seconds.
To reset to default settings, click the Reset Defaults button. To refresh the screen, click on Refresh. To
save the settings, click the Save button.
5.3.1.6. IR Light
This menu allows the user to select whether the IR lights for night vision are on or off for the selected profile. Below is a
screenshot of this menu:
26
•
•
Profile: This dropdown box allows the user to select which profile to modify. The 3 options are Day,
Night, and Normal.
Mode: This dropdown box allows the user to select whether to turn the indication light on or off.
SmartIR can also be set to automatically set the camera’s IR lights to on and off positions based on
Day & Night conditions. This setting is usually set by default within the camera.
To reset to default settings, click the Reset Defaults button. To refresh the screen, click on Refresh. To
save the settings, click the Save button.
5.3.1.7. Indicator Light
This menu box allows the user to select whether the indicator light in the camera is on or off for the selected profile. Below is a
screenshot of this menu:
27
•
•
Profile: This dropdown box allows the user to select which profile to modify. The 3 options are Day, Night, and Normal.
Mode: This dropdown box allows the user to select whether to turn the indication light on or off.
To reset to default settings, click the Reset Defaults button. To refresh the screen, click on Refresh. To save the settings, click the
Save button.
5.3.1.8. Profile Management
Below is a screenshot that shows the Profile Management tab in the Configuration menu item:
Below is an explanation for each of the fields on the Profile Management tab in the Configuration menu
item:
• Profile Management: This set of radio buttons allow the user to set what basis the profile
management settings run on. There are 3 options: Normal, Full Time, and Schedule. Normal means
that the system can automatically alternate between night and day based on the profiles for each.
Full Time means that the system sticks to one profile the entire time it is running. Schedule allows
the user to dictate which times of the day are designated for the day profile and the night profile.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the settings,
click the Save button.
5.4.1.2. Video
This section allows the user to change video settings for the camera’s video feed. There are 4 tabs in this
menu item: Video, Snapshot, Overlay, and Path.
5.4.1.2.1. Video
Below is a screenshot that shows the Video tab in the Video menu item:
28
Below is an explanation for each of the fields on the Video tab in the Video menu item:
• Encode Mode: This dropdown box allows the user to select a compression protocol. The system
supports H.264 and MJPEG video compression protocols.
• Resolution: This dropdown box allows the user to set the resolution. The system supports various
resolutions and they can be selected from this dropdown list.
• Frame Rate (FPS): This dropdown box allows the user to select a frame rate. Frame rate settings are
measured in frames per second (FPS) and can range from 1f/s to 25f/s in PAL mode and 1f/s to 30f/s
in NTSC mode.
• Bit Rate Type: This dropdown box allows the user to select a bit rate type. The system supports two
bit rate types: CBR and VBR. In VBR mode, video quality can be set.
• Reference Bit Rate: This is the recommended bit rate value according to the resolution and frame
rate selected.
• Bit Rate: This dropdown box allows the user to select a bit rate.
• Frame Interval: This field allows the user to set the P frame amount between two I frames. The
value ranges from 1 to 150 seconds. Default value is 50. Recommended value is frame rate *2.
• Watermark Settings: This function allows the user to verify if the video has been tampered with.
• Watermark Character: This field allows the user to set the watermark’s text. The default string is
Digital CCTV. The maximum length is 85 characters. This string can only include numbers, characters,
and underscores.
Sub Stream is a lower quality stream that allows the feed to take up less resources and bandwidth when
streaming. The Main Stream and the Sub Stream have the same fields. Sub Stream can be enabled by
checking the box next to Enable.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button.
To save the settings, click the Save button.
5.4.1.2.2 Snapshot
Below is a screenshot that shows the Snapshot tab in the Video menu item:
29
Below is an explanation for each of the fields on the Snapshot tab in the Video menu item:
• Snapshot Type: This dropdown box allows the user to select a snapshot mode. There are two
snapshot modes:
▪ General: Snapshots are taken as scheduled.
▪ Event: Snapshots occur when a motion detection alarm or tampering alarm is
triggered
• Image Size: This dropdown box shows the image size. By default, the screenshot size is the same size
as the video feed’s resolution.
• Quality: This dropdown box allows the user to select image quality. Quality is adjusted on a scale of
1-6.
• Interval: This is to set snapshot frequency. The value ranges from 1 to 7 seconds. The maximum
setting for a customized interval is 3600s/picture.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button.
To save the settings, click the Save button.
5.4.1.2.3. Overlay
Below is a screenshot that shows the Overlay tab in the Video menu item:
30
The menu on the left allows the user to select which overlay to modify. Privacy Masking, Channel Title,
Time, and Text Overlay can all be modified in this menu.
For Privacy Masking, the radio button enables or disables the feature. To set a privacy mask, click one of
the boxes in the live view window, and position or resize it as needed. To remove a box, click on it, then
click the delete button. To remove all privacy filter boxes, click the remove all button.
For Channel Title, the radio button enables or disables the feature. The Input Channel Title field allows
the channel title to be modified.
For Time, the radio button enables or disables the feature. Clicking the Display Weekdays checkbox will
show the weekday at the end of the timestamp.
For Text Overlay, the radio button enables or disables the feature. The Input Text box allows the user to
enter multiple lines of text as needed, and the Text Alignment dropdown box allows the user to align the
text either right or left.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button.
To save the settings, click the Save button.
5.4.1.2.4 Path
Below is a screenshot that shows the Path tab in the Video menu item:
Below is an explanation for each of the fields on the Path tab in the Video menu item:
• The Live Snapshot field allows the user to select where to save live snapshots to. Click the Browse
button to select a different destination folder.
• The Live Record field allows the user to select where to save live recordings to. Click the Browse
button to select a different destination folder.
• The Playback Snapshot field allows the user to select where to save playback snapshots to. Click the
Browse button to select a different destination folder.
31
•
•
The Playback Download field allows the user to select where to save playback video downloads to.
Click the Browse button to select a different destination folder.
The Video Clips field allows the user to select where to save video clips to. Click the Browse button
to select a different destination folder.
To reset to default settings, click the Reset Defaults button. To save the settings, click the Save button.
5.4.2 Network
This menu section allows the user to change network settings for the camera.
5.4.2.1 TCP/IP
The TCP/IP menu item has two tabs: TCP/IP and P2P.
5.4.2.1.1 TCP/IP
TCP/IP stands for Transmission Control Protocol/Internet Protocol and it is the language/protocol that
allows communication between internet connected devices, whether on a local network, or a on the
Internet at large. This screen allows for TCP/IP settings to be modified for the camera to establish a
connection to the network. Below is a screenshot of the TCP/IP settings tab:
Below is an explanation of the fields on the TCP/IP settings tab:
• Host Name: This text field allows the user to change the host device name for the camera. This field
supports a maximum of 15 characters.
• Ethernet Card: This dropdown box allows the user to select which internet access device to use. If the
device is connected to a wired connection and a wireless one at the same time, then this box will have
options to pick either of the connections. The Set as Default button allows the user to select one of the
connection methods as the default one.
32
•
Mode: Static vs DHCP: This radio button allows the user to choose between a static IP address, and a
dynamic IP address. DHCP stands for Dynamic Host Configuration Protocol, and this enables the camera
to automatically obtain an IP address from another network device such as a server or more commonly, a
router. When the DHCP function is enabled, the user cannot modify the IP address, Subnet Mask, or
Default Gateway, as these values are obtained from the DHCP function. To view the current IP address,
DHCP needs to be disabled. Note: When PPPoE is enabled, modification of the IP Address, Subnet Mask,
and Gateway becomes prohibited.
• MAC Address: This field shows the camera’s MAC address, which is unique to this device. This number is
read only and is used to access a local area network (LAN).
• IP Version: This dropdown allows the user to select the IP version. The two options are IPV4 and
IPV6.
• IP Address: This field allows the user to enter a custom IP address.
• Subnet Mask: This field allows the user to enter a custom subnet mask.
• Default Gateway: This field allows the user to enter a custom default gateway.
• Preferred DNS Server: This field allows the user to enter the preferred DNS server
IP address.
• Alternate DNS Server: This field allows the user to enter the alternate DNS server IP address.
• Enable ARP/Ping to set IP Address Service: This checkbox allows the user to enable the ARP/Ping service
to change the IP address service. For more information on this feature, click the help button while on the
TCP/IP settings tab.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the settings,
click the Save button.
5.4.2.1.2 P2P
The P2P settings screen is where users can use a QR code to connect their smartphone or tablet to the camera. This feature
needs to be enabled for use with the Amcrest View app, Amcrest Cloud, or AmcrestView.com. Below is a screenshot of the P2P
settings tab:
33
Below is an explanation of the fields on the P2P settings tab:
Enable: This checkbox allows the user to enable the P2P feature for the camera. This feature must be enabled for the
camera to connect to a smartphone or tablet via the Amcrest View app. It is enabled by default.
• Status: This field displays the status of the P2P connection. Once the camera is connected to a device, this field should
display the word Online.
• S/N: This field displays the Token ID for the camera. The Token ID can be used to manually enter the camera’s information
on a mobile or tablet device in case the QR code scanning feature cannot be used.
• QR Code: This image is a Quick Response (QR) code. By scanning this image using the Amcrest View app, this camera can
establish a connection with the app.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the settings,
click the Save button.
5.4.2.2. Connection
The Connection menu item has two tabs: Connection and ONVIF.
5.4.2.2.1 Connection
The Connection tab is where users can configure port connections. Below is a screenshot of the Connection settings tab:
Below is an explanation of the fields on the Connection settings tab:
• Max Connections: This field allows the user to specify the maximum number of users that can be connected to the camera
at the same time. The maximum number of users the camera can support at one time is 20.
• TCP Port: This field designates the Transmission Control Protocol (TCP) port number. The default value is 37777.
• UDP Port: This field designates the User Datagram Protocol (UDP) port number. The default value is
37778.
HTTP Port: This field designates the Hypertext Transfer Protocol (HTTP) port number. The default value is 80.
• RTSP Port: This field designates the Real Time Streaming Protocol (RTSP) port number. The default value is 554.
34
• HTTPS: This field enables the use of the HTTPS protocol for accessing the camera.
• HTTPS Port: This field designates the Hypertext Transfer Protocol Secure (HTTPS) port number. The default value is 443.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the settings,
click the Save button.
5.4.2.2.2 ONVIF
The ONVIF tab is where users can configure authentication via the ONVIF standard. Below is a screenshot of the ONVIF settings
tab:
To enable ONVIF, click the radio button next to Enable, and then click the save button.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the settings,
click the Save button.
5.4.2.3. DDNS
DDNS stands for Dynamic Domain Name Server. This technology is used to automatically update name
servers in real time to help the camera maintain a persistent address despite changes in location or
configuration. What this means is that even when the camera is restarted, moved, or reconfigured, it can
keep the same IP address, thus allowing remote users uninterrupted access to the camera, rather than
having to request a new IP address to use for remote access anytime a change is made.
To use this feature, users will need to setup an account with a DDNS service. The camera supports a
variety of DDNS services such as Quick DDNS, NO-IP DDNS, CN99 DDNS, and Dyndns DDNS. Based on
which service is selected, different options may show on this screen. For purposes of this guide,
AmcrestDDNS will be used. AmcrestDDNS is a free DDNS service provided by Amcrest, and it must be
renewed every year. A renewal reminder email will be sent to the email entered in the username field
below.
Below is a screenshot of the DDNS settings screen, configured to AmcrestDDNS:
35
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button.
To save the settings, click the Save button.
5.4.2.4 IP Filter
This screen allows for the filtering of IP addresses, either blocking them, or granting them access to the
camera. This feature helps make the camera more secure by limiting remote access only to approved
users. Below is a screenshot of the IP Filter screen:
Below is an explanation of fields on the IP Filter settings screen:
• Trusted Sites: This checkbox allows the user to enable the IP Filter feature for trusted sites.
• Add IP/MAC: This button opens a popup that allows the user to add IP or MAC addresses to the
trusted site list. Note: When accessing the camera externally, please add the MAC address of the
router on the PC end.
• Remove All: This button allows the user to remove all sites from the trusted IP/MAC list.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button.
To save the settings, click the Save button.
5.4.2.5. SMTP (Email)
This screen allows for the configuring of email settings to permit the camera to send emails when an
alarm is triggered. Below is a screenshot of the email settings screen:
36
Below is an explanation of fields on the SMTP (Email) settings screen:
•
SMTP Server: SMTP stands for Simple Mail Transfer Protocol. This field allows the user to enter the
SMTP server used by the email service.
•
Port: This field allows the user to enter the port that corresponds to the selected SMTP server.
•
Login Anonymously: This checkbox allows the user to anonymously login to the server.
•
Username: This field allows the user to enter the SMTP username.
•
Password: This field allows the user to enter the password associated with the SMTP username.
•
Sender: This field allows the user to enter the sender email address. This email address will be the
one that sends out all emails pertaining to the alerts and alarm emails sent by the camera.
•
Authentication: This dropdown box allows the user to select an encryption type. There are two
types of email encryption protocols that are available.
•
SSL: Secure Socket Layer
•
TLS: Transport Layer Security
•
Subject: This field allows the user to define the subject line of the email that is sent to the receivers.
•
Recipients: This field allows the user to enter the receiver email address. These email addresses are
the ones that will receive any emails pertaining to alert and alarm emails sent by the camera. Up to
3 email addresses can be entered in this field.
37
•
•
Interval: This field allows the user to define, in seconds, how long the system should wait between
sending emails. This prevents multiple emails from being sent out.
Keep Alive: This checkbox allows the user to enable a function to periodically check in with the
SMTP server to ensure it can connect correctly.
Email Test: This button causes the system to automatically send out an email to test the connection
is OK or not. Prior to the email test, please save the email setup information.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To
save the settings, click the Save button.
5.4.2.6. UPnP
UPnP stands for Universal Plug and Play, and it is a protocol used to easily connect devices to the
internet. In the case of this camera, it allows the camera to connect to the router in an easy manner to
quickly allow for remote access. Below is a screenshot of the UPnP settings screen:
Below is an explanation of fields on the UPnP settings screen:
• Enable: This checkbox allows the user to enable the UPnP function.
• Router State: This field shows the UPnP status and has two options:
• Unknown: This means that UPnP mapping has failed.
• Successful: This means that UPnP mapping has succeeded.
• Port Mapping List: This table is used to show how the ports for each protocol listed below have been
remapped by the UPnP protocol.
o The first column shows the checkboxes to enable the corresponding service on the table.
o The second column shows the name of the services. To edit this, double click on the service
line item.
o The third column shows the name of the protocol used by that service. To edit this, click the
pencil button in the modify column for that line item.
38
o
o
o
o
The fourth column shows the Internal Port used by that service to establish communication
from the router to the camera. To edit this, click the pencil button in the modify column for
that line item.
The fifth column shows the External Port used by that service to establish communication
from the router to the internet. To edit this, click the pencil button in the modify column for
that line item.
The sixth column shows the status of the protocol. If the protocol was mapped successfully,
this field will say “Mapping Succeeded”.
The seventh column allows the user to open a dialog box and edit the service’s information.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To
save the settings, click the Save button.
5.4.2.7. SNMP
SNMP stands for Simple Network Management Protocol. This protocol is used to provide a basic framework to
allow connection between various network devices. Below is a screenshot of the SNMP settings screen:
Below is an explanation of fields on the SNMP settings screen:
• SNMP Version: These checkboxes allow the user to select the SNMP version to use.
SNMP Port: This field allows the user to write in a port for SNMP to use. The port can range from
anywhere from 1 to 65535.
• Read Community: This field shows which SNMP community has read access.
• Write Community: This field shows which SNMP community has write access.
• Trap Address: This field allows the user to write in a trap address.
• Trap Port: This field allows the user to write in a trap port number. The trap port number should not
be the same as the SNMP port.
Note: This feature may not be available on all devices.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To
save the settings, click the Save button.
39
5.4.2.8. Bonjour
Bonjour is Apple's implementation of Zero-configuration networking (Zeroconf), a group of technologies that
includes service discovery, address assignment, and hostname resolution. Below is a screenshot of the
Bonjour settings screen:
Click the checkbox next to Enable to the Bonjour functionality. The Server Name field allows the user to specify
what name to use to connect devices via the Bonjour protocol.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To
save the settings, click the Save button.
Note: This feature may not be available on all devices.
5.4.2.9. Multicast
Multicast is a feature that enables the camera to broadcast its live view to multiple computers on the
same network. Below is a screenshot of the multicast screen:
Below is an explanation of the fields in the Multicast settings screen:
•
•
•
Enable: This checkbox allows the user to enable Multicast functionality.
Multicast Address: This field allows the user to enter a multicast address.
Port: This field allows the user to enter a multicast port.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To
save the settings, click the Save button.
40
5.4.2.10. WiFi
The WiFi feature on this camera allows it to connect to a network wirelessly. Below is a screenshot of
the WiFi tab on the WiFi menu:
Below is an explanation of the fields on the WiFi tab of the WiFi menu:
●
●
●
●
Enable: This checkbox allows the user to enable WiFi functionality.
Add SSID: This button allows the user to manually enter in an SSID.
Search SSID: This button allows the user to search for more SSIDs.
Refresh: This button obtains the most recent WiFi network information.
To connect to a WiFi network, click the line item for your WiFi network and enter the WiFi password.
Click on Connect to connect the camera to your WiFi network.
41
Allow the device to connect to your WiFi network. Once complete, the SSID field will show a green
Connected prompt:
The WiFi camera will now be connected to your WiFi network. You can now remove the Ethernet cable
from the device. Please note, the IP address listed in the WiFi Network Information menu will be the
IP address used to access your camera wirelessly.
5.4.2.11. 802.1x
802.1x is an authentication method for connecting to a network. Below is a screenshot of the 802.1x screen:
To enable 802.1x, click the checkbox next to Enable. An authentication method can be chosen from the dropdown
box, and a username and password can be entered in their respective fields.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To
save the settings, click the Save button.
Note: This feature may not be available on all devices.
5.4.2.12. QoS
QoS stands for Quality of Service and it refers to the overall performance of a computer network, particularly the
performance seen by the users of the network. Below is a screenshot of the QoS screen:
42
Below is an explanation of the fields on the QoS screen:
• Realtime Monitor: This field allows the user to enter in a priority value for real time monitoring
packets. The range is between 0-63.
• Command: This field allows the user to enter in a priority value for command packets. The range is
between
063.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To
save the settings, click the Save button.
5.4.2.10. HTTPS
This menu allows the user to enable and create HTTPS certificates. Below is a screenshot of this menu:
Before you create certificate or download certificate, from main window->Setup->Network >Connection, set the
HTTPS port values and then check the box to enable HTTPS
For more information on how to setup HTTPS in the web user interface visit
https://www.youtube.com/watch?v=gkjlaf-Iuso
5.4.3 Event
This menu section allows the user to change different settings for triggering events.
5.4.3.1 Video Detection
The video detection menu has two tabs: Motion Detect and Video Tamper.
5.4.3.1.1 Motion Detect
This tab allows the user to modify motion detection settings. Below is a screenshot of the Motion Detect tab:
43
Below is an explanation of the fields on the Motion Detect tab:
• Enable: This checkbox enables motion detection for the camera.
• Schedule: Clicking this button opens a weekly schedule that can be used to set times.
44
o
Click and drag to set motion detection for certain days of the week. Also, periods of motion detection can
be set for each day and enabled using the period settings on the bottom half of the screen. There are a
total of 6 periods that can be set.
Anti-Dither: This field allows the user to set the anti-dither time. The values in this field can range from 5 to 600
seconds. This time value controls how long the alarm signal lasts. Based on motion detection, a buzzer can go off,
a tour can begin, , a snapshot can be taken, or the camera can begin recording.
o For example, if the anti-dither time is set to 10 seconds, each alarm may last 10 seconds if the local alarm
is activated. During the process, if the system detects another local alarm signal at the fifth second, the
buzzer, tour, snapshot, record channel functions will begin another 10 seconds while the screen prompt,
alarm upload, email will not be activated again. After 10 seconds, if system detects another alarm signal, it
can generate a new alarm since the anti-dither time has expired.
•
Detection Area: Clicking this button opens a pop-up screen that can be used to set detection areas.
o When the setup button is clicked, a live stream of the video is shown. The user can then set up to 4 regions,
each with their own region name, sensitivity (1-100), and threshold (1-100). Each region has a specific color, and
the region selector tool is displayed when the mouse is moved to the top of the screen.
 Sensitivity is the amount of change required to increase the motion detected by a percentage. The lower the
sensitivity, the more movement is required to trigger an alarm.
 Threshold is the level that the motion detection needs to reach to trigger an alarm. The lower the
threshold, the more likely that motion will trigger an alarm.
 To designate a zone, click and drag the mouse over the area desired. When a colored box is displayed over
the live feed, that area is now enabled for motion detection.
45
After the motion detection zone is set, click the enter button to exit the motion detection screen.
Remember to click the save button on the motion detection settings screen, otherwise the motion detection zones will not go
into effect. Clicking the cancel button to leave the motion detection zone and will not save the zone setup.
• Record: This checkbox allows the user to enable the camera to record video when a motion detection alarm is
triggered.
• Record Delay: This field specifies in seconds how long the delay between alarm activation and recording should be.
• Relay Out: This checkbox allows the user to enable the camera to trigger a connected alarm (connected to the alarm
port on the back of the camera) when a motion detection alarm is triggered.
• Alarm Delay: This field specifies in seconds how long the delay between alarm activation and Relay alarm activation
should be.
• Send Email: This checkbox allows the user to enable the camera to send an email when a motion detection alarm is
triggered.
• Snapshot: This checkbox allows the user to enable the camera to take a snapshot when a motion detection alarm is
triggered.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the settings,
click the Save button.
5.4.3.1.2 Video Tampering
This tab allows the user to modify video tamper settings. Below is a screenshot of the Video Tamper tab:
Below is an explanation of the fields on the Video Tamper tab:
• Enable: This checkbox enables a video tamper alarm for the camera.
• Schedule: Clicking this button opens a weekly schedule that can be used to set times.
46
•
•
•
•
•
o Click and drag to set video tampering for certain days of the week. Also, periods of video tampering can
be set for each day and enabled using the period settings on the bottom half of the screen. There are a total
of 6 periods that can be set.
Record: This checkbox allows the user to enable the camera to record video when a video tampering
alarm is triggered.
Record Delay: This field specifies in seconds how long the delay between alarm activation and
recording should be.
Relay Out: This checkbox allows the user to enable the camera to trigger a connected alarm
(connected to the alarm port on the back of the camera) when a video tamper alarm is triggered.
Alarm Delay: This field specifies in seconds how long the delay between alarm activation and Relay
alarm activation should be.
Send Email: This checkbox allows the user to enable the camera to send an email when a video
tampering alarm is triggered.
Snapshot: This checkbox allows the user to enable the camera to take a snapshot when a video
tampering alarm is triggered.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the settings,
click the Save button.
5.4.3.3 Abnormality
This menu allows the user to adjust abnormality event settings. This menu has 2 tabs: Network, and Illegal
Access.
5.4.3.3.1 Network
This tab allows the user to set the camera’s response to a Network related abnormality. Below is a screenshot of the
Network tab screen:
47
Below is an explanation of the fields on the Network settings tab:
• Event Type: This dropdown box allows the user to select which Network abnormality to set event triggers for. The 2
options are Disconnection and IP Conflict.
• Enable: This checkbox enables the Network abnormality trigger for the camera.
• Record: This checkbox allows the user to enable the camera to record video when a network abnormality is detected.
• Record Delay: This field specifies in seconds how long the delay between alarm activation and recording should be.
• Relay Out: This checkbox allows the user to enable the camera to trigger an alarm when a network abnormality is
detected.
• Alarm Delay: This field specifies in seconds how long the delay between alarm activation and relay alarm activation
should be.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the
settings, click the Save button.
5.4.3.3.2 Illegal Access
This tab allows the user to set the camera’s response to an Illegal Access related abnormality. Below is a screenshot of the
Illegal Access tab screen:
Below is an explanation of the fields on the Illegal Access settings tab:
• Enable: This checkbox enables the Illegal Access abnormality trigger for the camera.
• Login Failure: This field allows the user to specify how many failed login attempts must be attempted to trigger an
Illegal Access abnormality event.
48
•
•
•
Relay Out: This checkbox allows the user to enable the camera to trigger an alarm when illegal access is detected.
Alarm Delay: This field specifies in seconds how long the delay between alarm activation and relay alarm activation
should be.
Send Email: This checkbox allows the user to enable the camera to send an email when illegal access is attempted.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button.
To save the settings, click the Save button.
5.4.4 Storage
This menu section allows the user to change storage settings for the camera.
5.4.4.1 Schedule
The schedule menu manages the recording schedule for the camera. This menu has 3 tabs: Record
Schedule, Snapshot Schedule, and Holiday Schedule.
5.4.4.1.1 Record Schedule
This tab is where video recording settings are configured. Below is a screenshot of the Record Schedule
settings screen:
Below is an explanation of the fields on the Record Schedule settings tab:
Record Type: These checkboxes allow the user to select which recording type they want to configure on
the schedule. There are 3 types of recordings:
o General: General recording means that the camera captures all footage for the specified
time period. General recording is represented by the color green.
o Motion: Motion Detection recording means that the camera captures only footage when
the motion detection alarm is activated. Motion recording is represented by the color
yellow.
o Alarm: Alarm recording means that the camera captures only footage when an alarm is
activated. Alarm recording is represented by the color red.
49
• Video Recording Schedule: To specify a video recording range, first select the type of recording
desired, then click and drag on time bar for the desired date. To edit multiple days at once, drag the
cursor further up or down to cover the other days.
o Setup: Clicking this button opens a screen that allows for recording periods to be set for each day
and for each recording type. There are a total of 6 periods that can be set.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To
save the settings, click the Save button.
5.4.4.1.2 Snapshot Schedule
This tab is where snapshot recording settings are configured. Below is a screenshot of the Snapshot
Schedule settings screen:
Below is an explanation of the fields on the Snapshot Schedule settings tab:
• Record Type: These checkboxes allow the user to select which snapshot type they want to configure
on the schedule. There are 3 types of snapshots:
o General: General means that the camera will take snapshots during the specified time
period. General recording is represented by the color green.
o Motion: Motion Detection means that the camera only takes snapshots when the motion
detection alarm is activated. Motion recording is represented by the color yellow.
o Alarm: Alarm means that the camera only takes snapshots when an alarm is activated.
Alarm recording is represented by the color red.
• Snapshot Recording Schedule: To specify a snapshot range, first select the type of snapshot desired,
then click and drag on time bar for the desired date. To edit multiple days at once, drag the cursor
further up or down to cover the other days.
o Setup: Clicking this button opens a screen that allows for snapshot periods to be set for
each day and for each snapshot type. There are a total of 6 periods that can be set.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To
save the settings, click the Save button.
50
5.4.4.1.3. Holiday Schedule
This tab is where holiday settings are configured. Below is a screenshot of the Holiday Schedule settings
screen:
Below is an explanation of the fields on the Holiday Schedule settings tab:
• Record Type: These checkboxes allow the user to select which recording type they want to configure on
the schedule. There are 2 types of recordings:
o Record: This checkbox is referring to video recording.
o Snapshot: This checkbox is referring to snapshot recording.
• Calendar: This calendar allows the user to select days to designate as holidays. Once a day is designated,
it can be customized to stop recording or snapshots for that day by using the Record and Snapshot
checkboxes.
To refresh the page, click the Refresh button. To save the settings, click the Save button.
5.4.4.2 Destination
This menu controls where recorded media is stored. There are 3 tabs in this menu: Path, FTP, and NAS.
5.4.4.2.1 Path
This tab is where the user can designate a path for recorded video and snapshots to reside in. Below is a
screenshot of the Path tab:
51
Below is an explanation of the fields on the Path settings tab:
• Event Type: This column designates storage options available to the camera. The options are FTP,
and NAS.
• Record Type: These columns designate which recording type should be recorded to which event
type. Check the box at the intersection of the record type and event type to designate where that
recording should be sent to.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To
save the settings, click the Save button.
5.4.4.2.2 FTP
This tab is where the user can change FTP settings. Below is a screenshot of the FTP tab:
Below is an explanation of the fields on the FTP settings tab:
• Enable: This checkbox allows the user to enable FTP uploading for the camera’s recorded media.
• Server Address: This field allows the user to designate a DDNS address for the FTP server.
• Port: This field allows the user to designate the port number for the FTP server.
• User Name: This field allows the user to input the username used to login to the FTP server.
• Password: This field allows the user to input the password used to login to the FTP server.
52
•
Remote Directory: This field allows the user to specify a remote directory on the FTP to send the
recorded media to.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To
save the settings, click the Save button.
5.4.4.2.4 NAS
This tab is where the user can change NAS settings. Below is a screenshot of the NAS tab:
Below is an explanation of the fields on the NAS settings tab:
• Enable: This checkbox allows the user to enable NAS uploading for the camera’s recorded media. •
Server Address: This field allows the user to designate a DDNS address for the NAS server/device.
• Remote Directory: This field allows the user to specify a remote directory on the NAS to send the
recorded media to.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the settings,
click the Save button.
5.4.4.3 Record Control
This menu is where general recording settings are configured. Below is a screenshot of the record control menu:
53
Below is an explanation of the fields on the Record Control settings tab:
•
•
•
Pack Duration: This field allows the user to set how many minutes each file is comprised of.
Pre-event Record: This field allows the user to specify how many seconds before an event should be
recorded.
Disk Full: This dropdown box allows the user to designate what the camera should do when the disk is
full. There are 2 options: Overwrite or Stop.
Record Mode: This set of radio buttons allows the user to designate the recording mode. The
options are Auto, Manual, and Off.
Record Stream: This dropdown box allows the user to specify which stream to record. The options
are main stream and sub stream.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To
save the settings, click the Save button.
5.4.4.4. Cloud Storage
This menu redirects the user to the Amcrest Cloud web site. At this website (amcrestcloud.com) users can register for new
accounts as well as view or modify existing accounts.
For more information on Amcrest Cloud visit: amcrestcloud.com
5.4.5 System
This menu section allows the user to change general settings for the camera.
5.4.5.1 General
This menu controls where general settings are configured. There are 2 tabs in this menu: General and
Date & Time.
5.4.5.1.1 General
This tab is where the user can configure some basic camera settings. Below is a screenshot of the General tab:
54
Below is an explanation of the fields on the General settings tab:
•
•
•
Device Name: This field allows the user to change the device’s name.
Language: This dropdown box allows the user to change the language used in the camera.
Video Standard: This dropdown box allows the user to select either the NTSC or PAL video standard.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button.
To save the settings, click the Save button.
5.4.5.1.1 Date & Time
This tab is where the user can configure the date and time settings for the camera. Below is a screenshot
of the Date & Time tab:
Below is an explanation of the fields on the Date & Time settings tab:
• Date Format: This dropdown box allows the user to change the date format used in the camera.
• Time Format: This dropdown box allows the user to change the time format used in the camera.
• Time Zone: This dropdown box allows the user to change the time zone used in the camera.
• Current Time: This field allows the user to enter in the date and time manually. Clicking the PC Sync
button allows the camera to sync with a Network Time Protocol (NTP) server.
• Enable DST: This checkbox allows the user to enable daylight savings time for the camera.
• DST Type: This radio button allows the user to select whether DST is based on the week, or a specific
day.
55
•
•
•
•
Start Time: This dropdown box and field allow the user to enter in the start time for DST.
End Time: This dropdown box and field allow the user to enter in the end time for DST.
Synchronize with NTP: This checkbox allows the user to enable the camera’s synchronization with an
NTP server.
NTP Server: This field allows the user to enter in an NTP server.
Port: This field allows the user to enter in the port number for the NTP server.
Update Period: This field allows the user to enter in the update period time. This number designates
how frequently the camera pings the NTP server to ensure it has the correct time. The range is from
0-30 minutes.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button.
To save the settings, click the Save button.
5.4.5.2. Manage Users
This menu allows the user to change the user accounts on the camera. By default, the camera only has the
admin account which has all rights/authorities. Additional accounts can be created on this screen. Below is a
screenshot of the account screen:
Below is an explanation of the fields on the Account screen:
•
•
•
•
•
•
•
Anonymous Login: This checkbox allows the user to enable the anonymous login feature. This allows
all user account names to remain hidden on this screen.
User Name: This tab shows the usernames available on the camera.
Group: This tab shows the user groups available on the camera.
No.: This column shows the user’s number on the user list.
User Name: This column shows the usernames of the different accounts on the camera.
Group Name: This column shows the group of the different accounts on the camera.
Description: This column shows a description of the account.
Modify: This column allows the user to modify the user account.
56
•
•
•
Delete: This column allows the user to delete a user account. Note: The admin account cannot be
deleted.
Authority List: This box shows which user rights/authorities are assigned to an account.
Add User: This button allows the user to add a new user to the camera.
5.4.5.3 Default Settings
This screen allows the user to reset the camera and all its settings to the factory settings.
Below is a screenshot of the Default screen:
Below is an explanation of the items listed in this field:
Default Settings: Only the IP address, user management, and other settings can be recovered after reset.
Factory Default: Completely resets the camera to factory default settings. No settings can be recovered
after the camera has been returned to its factory default settings.
5.4.5.4 Import/Export
This screen allows the user to import or export settings from the camera. Below is a screenshot of the
Import/Export screen:
To import settings, click the Import button. To export settings, click the Export button.
5.4.5.5 Auto Maintain
This screen allows the user to set auto maintenance settings for the camera. Below is a screenshot of the
Auto Maintain screen:
57
Below is an explanation of the fields on the Auto Maintain screen:
•
•
Auto Reboot: This checkbox allows the user to enable the auto reboot function. The dropdown box
and field to the right of this checkbox allow the user to specify what date and time of the week the
camera will auto reboot.
Auto Delete Old Files: This checkbox allows the user to enable the auto deletion of old files on the
camera.
Manual Reboot: This button allows the user to manually reboot the camera.
•
•
To refresh the page, click the Refresh button. To save the settings, click the Save button.
5.4.5.6. Upgrade
This menu allows the user to upgrade the camera’s firmware. Below is a screenshot of the Upgrade screen:
To upgrade the firmware for your camera, follow the steps provided below:
•
•
Go to amcrest.com/firmware-subscribe
You will be taken to an Amcrest firmware downloads page. Search for the model number
of your camera and download the latest firmware file.
58
•
•
•
Return to the web user interface for your camera and press the Browse button to locate
and import the firmware file you just downloaded.
Once the firmware file has been imported, click Upgrade.
The device will reset, return to the web user interface. The upgrade is now complete.
Note: When upgrading the camera’s firmware, do not disconnect the internet or power from the camera.
5.4.6 Information
This menu section allows the user to view information about the camera for reference purposes.
5.4.6.1 Version
This screen allows the user to see various information about the camera’s software versions, as well as
other information. Below is a screenshot of the camera’s version screen:
On this screen, software version, web interface version, and ONVIF version are displayed. Also, the
S/N (Token ID) is displayed here.
5.4.6.2 Log
This screen is where the camera’s activity log is kept. Below is a screenshot of the Log screen:
59
To view logs for a specific time period, modify the start time and end time fields, choose the type of
event (system, setting, data, event, record, manage users, clear log), and click search.
To back up the log, click the Backup button. To clear the log, click the Clear button.
5.4.6.2.1. Remote Log
This tab allows the user to enable and access remote logs within the camera. Below is a screenshot of this menu:
To use this menu, check the enable check box to enable remote log functionality. Enter the IP address, port number and device
number of the device you would like to pull remote logs from.
To save your settings, click Save. If you would like to refresh the screen to show applied settings, click Refresh. To set the screen
back to its original default settings, click Reset Defaults.
5.4.6.3 Online Users
This screen allows the user to see which users are online. Below is a screenshot of the Online Users
screen:
Click Refresh to refresh this table.
5.5 Alarm
This screen is where the alarm log is kept. Below is a screenshot of the alarm screen:
60
The table on the right shows the alarm log and all the alarm instances that have occurred.
The checkboxes allow the user to narrow down which alarms they want to see in the alarm log. Clicking the checkbox next to
Prompt will cause the system to pop up a dialog box anytime an alarm is triggered.
Clicking the checkbox next to Play Custom Alarm will use a custom alarm sound for the alarm prompt. Click the Browse button to
search for a custom alarm sound to use.
5.6 Logout
Clicking the logout button will log out the user.
61
6. FAQs/Troubleshooting
1. The camera does not boot up properly.
Below are a few possible reasons why this may be occurring:
• The power input is not correct voltage.
• The power cable connection is not secured correctly.
• The firmware was upgraded incorrectly.
2. Camera often automatically shuts down or stops running.
Below are a few possible reasons why this may be occurring:
• The input voltage is too low or is not stable.
• The insides of the camera have accumulated too much dust.
• The temperature is either too hot or too cold.
• The hardware is malfunctioning.
3. Real-time video color is distorted.
Below are a few possible reasons why this may be occurring:
• The camera is not compatible with the monitor.
• The camera color or brightness settings are not correctly configured.
4. The timestamp is not displaying the correct time.
The time and date settings may not be configured correctly. You can take the following steps to resolve
the issue:
• Log into your camera’s web user interface via a laptop or PC.
• Navigate to Setup>>System>>General
• Click on the Date & Time tab.
• Click on PC Sync to sync the date and time.
• Click Save to save and apply the new date and time settings.
5. Motion detection does not work.
Below are a few possible reasons why this may be occurring:
• The motion detection time period may be incorrectly configured.
• Motion detection zone setup is not correctly configured.
• Motion detection sensitivity is too low.
6. Web Access isn't working.
Below are a few possible reasons why this may be occurring:
• Windows version is pre -Windows 2000 service pack 4. Use a more recent version of Windows.
• ActiveX controls have been disabled.
• The PC is not using DirectX 8.1 or higher. Upgrade to a more recent version of DirectX.
• The camera is having network connection errors.
• Web access may be setup incorrectly.
• The username or password may be incorrect.
7. Web Access live view is only displaying a static picture.
Below are a few possible reasons why this may be occurring:
• The network speed is not enough to transfer video data via web access.
• The client PC may have limited resources.
• Multicast mode may be causing this issue.
• A privacy mask or screensaver may be enabled.
• The logged in user may not have enough rights to monitor real-time playback.
62
• The camera’s local video output quality is not enough.
8. The camera is unable to connect to WiFi.
Below are a few possible reasons why this may be occurring:
• The network is not stable.
• The WiFi settings in the camera are not configured. (refer to section 5.4.2.10. WiFi)
• Interference from obstructions between camera and router.
• The distance is too far for the camera to connect.
9. The alarm signal cannot be disarmed.
Below are a few possible reasons why this may be occurring:
• An alarm may be setup incorrectly.
• An alarm output may have been manually opened.
• There may be an error in the camera’s firmware.
10. Alarms are not working.
Below are a few possible reasons why this may be occurring:
• The alarm is not setup correctly.
• The alarm cable is not connected correctly.
• The alarm input signal is not correctly configured.
• There are two loops connected to one alarm device.
11. Downloaded files cannot be played back.
Below are a few possible reasons why this may be occurring:
• The media player software on the PC may not be able to read the file format.
• The PC may not have DirectX 8.1 or higher.
• The PC may not have Windows XP or higher.
12. When I login via HTTPS, a dialogue says the certificate has expired or is not valid yet.
• Ensure the PC has the same time as the camera’s system time.
Glossary of Terms
•
•
•
•
•
•
•
Alarm Delay – The gap in time between alarm activation and Relay alarm activation.
Alternate Gateway – The node on the computer network that the network software uses when an IP address does not
match any other routes in the routing table, and when the default gateway is not available.
Anti-Dither – This time value controls how long the alarm signal lasts. The values in this field can range from 5 to 600
seconds. Based on motion detection, a buzzer can go off, a tour can begin, a snapshot can be taken, or the camera can
begin recording.
DDNS – Stands for Dynamic Domain Name System. DDNS is a method of automatically updating a name server in the
Domain Name System (DNS), often in real time, with the active DNS configuration of its configured hostnames, addresses or
other information.
Default Gateway – The node on the computer network that the network software uses when an IP address does not match
any other routes in the routing table.
DHCP – Dynamic Host Configuration Protocol is a network protocol that enables a server to automatically assign an IP
address to a computer from a defined range of numbers (i.e., a scope) configured for a given network.
Fluency – Fluency described the lack of stuttering or excessive delay in a video stream. Fluency usually comes at the
expense of video quality when a network is constrained.
IP Address – Internet Protocol Address is a unique numerical label assigned to each device connected to a computer
network. The IP address allows communication between different devices on a network.
63
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Main Stream – Main Stream is the main streaming protocol for the camera. Main stream uses more bandwidth and
attempts to keep quality and fluency high.
NO/NC – Normally Open and Normally Closed are options for sensor type. These settings allow for different exposure types
when capturing video and still images.
NTP – Network Time Protocol is a networking protocol for clock synchronization between computer systems over packetswitched, variable-latency data networks.
P2P – Peer-to-Peer is a decentralized communications model in which each party has the same capabilities and either party
can initiate a communication session.
PPPoE – Point to Point Protocol over Ethernet is a network protocol for encapsulating Point to Point Protocol data packets
inside Ethernet frames.
QR Code – Quick Response code is a type of digital barcode that enables devices to share complex data strings quickly.
Record Delay – Record Delay specifies in seconds how long the delay between alarm activation and recording should be.
Relay Out – Relay Out triggers a connected alarm (connected to the alarm port on the back of the camera) when an alarm
on the camera is triggered.
S/N – S/N stands for serial number. The S/N is unique to each camera and can be used to connect to different Amcrest apps
and services to provide different methods of access to the camera.
Sensitivity – Sensitivity is the amount of change required to increase the motion detected by a percentage. The lower the
sensitivity, the more movement is required to trigger an alarm.
SMTP – Simple Main Transfer Protocol is an Internet standard for electronic mail (e-mail) transmission.
Static IP – An IP address that does not change.
Sub Stream – Sub Stream is an alternative streaming protocol for the camera. Sub stream uses less bandwidth and attempts
to keep fluency high at the expense of quality.
Subnet Mask – a 32-bit number that masks an IP address, and divides the IP address into network address and host address.
TCP/IP – TCP/IP stands for Transmission Control Protocol/Internet Protocol and it is the language/protocol that allows
communication between internet connected devices, whether on a local network, or a on the Internet at large.
Threshold – Threshold is the level that the motion detection needs to reach to trigger an alarm.
UPnP – UPnP stands for Universal Plug and Play, and it is a protocol used to easily connect devices to the internet.
• Video Tamper – Video Tamper refers to any major changes happening to the video feed such as it being blocked out,
interfered with, or disconnected.
FCC Statement
1.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
2.
The user’s manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes,
or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment. In cases where the manual is provided only in a form other than paper, such as on a computer disk or over the
Internet, the information required by this section may be included in the manual in that alternative form, provided the user can
reasonably be expected to have the capability to access information in that form.
3.
(b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar
statement, placed in a prominent location in the text of the manual: NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
64
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the
separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
4.
RF exposure warning This equipment must be installed and operated in accordance with provided instructions and
the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and
must not be co-located or operating in conjunction with any other antenna or transmitter.
End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.
IC Warning Statement
TThis device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This
device may not cause interference; and (2) This device must accept any interference, including interference that may cause
undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the
radiator and any part of your body. Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de
séparation d'au moins 20 cm doit être maintenue entre l'antenne de cet appareil ettoutes les personnes.
65
Appendix A: Toxic or Hazardous Materials or Elements
Toxic or Hazardous Materials or Elements
Component
Name
Pb
Hg
Cd
Cr VI
PBB
PBDE
○
○
○
○
○
○
（Panel）
○
○
○
○
○
○
Circuit Board
○
○
○
○
○
○
Fastener
○
○
○
○
○
○
Wire and
Cable/Ac
Adapter
○
○
○
○
○
○
Packing
Material
○
○
○
○
○
○
Accessories
○
○
○
○
○
○
Sheet
Metal(Case)
Plastic Parts
O: Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the relevant
threshold of the SJ/T11363-2006 standard.
X: Indicates that the concentration of the hazardous substance of at least one of all homogeneous materials in the
parts is above the relevant threshold of the SJ/T11363-2006 standard. During the environmental-friendly use period
(EFUP) period, the toxic or hazardous substance or elements contained in products will not leak or mutate so that
the use of these (substances or elements) will not result in any severe environmental pollution, any bodily injury or
damage to any assets. The consumer is not authorized to process such kind of substances or elements, please return
to the corresponding local authorities to process according to your local government statutes.
66
O: Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the
relevant threshold of the SJ/T11363-2006 standard.
X: Indicates that the concentration of the hazardous substance of at least one of all homogeneous materials in
the parts is above the relevant threshold of the SJ/T11363-2006 standard. During the environmental-friendly
use period (EFUP) period, the toxic or hazardous substance or elements contained in products will not leak or
mutate so that the use of these (substances or elements) will not result in any severe environmental pollution,
any bodily injury or damage to any assets. The consumer is not authorized to process such kind of substances
or elements, please return to the corresponding local authorities to process according to your local
government statutes.
Note:
•
To view setup videos for many of the steps outlined in this guide, go to
http://amcrest.com/videos
• This user manual is for reference only. Slight differences may be found in the user interface.
• All the designs and software here are subject to change without prior written notice.
• All trademarks and registered trademarks mentioned are the properties of their respective
owners.
To contact Amcrest support, please do one of the following:
•
•
Visit http://amcrest.com/contacts and use the email form
Call Amcrest Support using one of the following numbers
Toll Free US: (888) 212-7538
International Callers (Outside of US): +1-713-893-8956
USA: 713-893-8956
Canada: 437-888-0177
UK: 203-769-2757
Email Amcrest Customer Support [email protected]
Copyright Amcrest© 2018
">