1

DVD recording

For recording get a blank DVD

+RW or DVD+R disc. Place in the tray with the label facing up and close the tray

Tip Switch the TV channel to the DVD

Recorder/VCR viewing channel to see which

TV programme you want to record

2

3

4

Press DOWN or UP to scroll through the channels, or press the numeric buttons to select which channel you want to record

Press REC MODE repeatedly to select a recording mode

Tip For more information about recording modes, refer to the user manual

Press RECORD to start recording

Tip Press RECORD again to make a 10 minutes recording, each you press RECORD adds 10 minutes to the recording time

5

6

To end recording press STOP . You will see

‘Recording file information. Please wait…’

Press LIST/DISC MENU to go to the disc menu and press PLAY on the title you just recorded to watch it

Types of discs used on this recorder

Type Record Playback

DVD+RW

DVD+R

DVD+R DL

DVD-RW

DVD-R

DVD VIDEO

AUDIO CD

VIDEO CD

DATA CD

DATA CD

Edit

Troubleshooting

For more troubleshooting tips, see the user manual.

Problem

Remote control does not work

Cannot record

Tip

• Aim remote control at recorder (not at TV) and remove any obstacles between them.

• Batteries are weak, replace the batteries.

• Channel you are recording is not stored or the wrong program number is selected.

• The recorder cannot duplicate copyrighted material onto a recordable DVD or VHS.

• A finalised DVD+R or a videocassette its recording tab removed has been inserted.

Need help?

User Manual

See the user manual that came with your DVD recorder/ VCR

Online

Go to www.philips.com/support

Hotline

call 1-888-PHILIPS (1-888-744-5477) for our operators

2005 © Koninklijke Philips N.V.

All rights reserved.

www.philips.com

DVD Recorder/VCR

Quick Start Guide

DVDR 3320V

What’s in the Box

6 HEAD HI-FI STEREO

ONE TOUCH RECORDING • LONG PLAY

DVD recorder/VCR

Remote control and 2 batteries

Quick start guide RF coaxial cable Video cable Audio cable User manual

DVD Player (front)

VHS Recording

1 Insert videocassette with the record tab still intact into cassette slot.

2 Press DOWN or UP to scroll the channels, or use to to select the

TV program you want to record.

3 Press REC MODE repeatedly to select a recording mode.

4 Press REC to start recording.

Tip

Press REC again to automatically record 30 minutes, every time you press REC adds 30 minutes recording time.

5 Press PAUSE to pause and REC again to resume recording.

Tip

Pause will switch to stop after 5 minutes.

6 To stop, press STOP .

If you have a VCR, follow the instructions for ‘Connection with VCR or similar device’. If you don’t have a VCR follow the instructions for

‘Connection without VCR’.

VHS Playback

1 Press VCR on remote control.

2 Insert videocassette into the cassette slot.

3 Press PLAY if playback does not start automatically.

4 To stop, press STOP.

5 Press STOP/EJECT to eject the cassette.

LIST/DISC

MENU

VCR

SYSTEM

MENU

RECORD

REC MODE

7

8

9

0

3

4

1

2

5

6

RETURN

DISPLAY TV/VIDEO

SYSTEM

MENU

OK

ZOOM

AUDIO

FWD

REW

D. DUBBING

TITLE

REPEAT

THUMBNAIL

CHAPTER

TIMER

SEARCH

MARKER

CLEAR

SHOWVIEW

VIDEOPLUS+

Need help?

User Manual

For more product information check the user manual of the DVD Recorder/VCR.

Online

Go to www.philips.com/support

Hotline

Call 1-888-PHILIPS (1-888-744-5477) for our operators.

2005 © Koninklijie Philips N.V.

All rights reserved.

12 NC 31 39 246 15141 www.philips.com

Title List

DVD+RW

2hour 3min

SP

Free

Empty Title

-- / -2:03:00

OK Select

DISPLA Y

Info REC Close

1/1

Front speakers

(left & right)

Centre speaker

Rear speakers (left & right) Subwoofer

MW loop antenna

FM wire antenna

(2x)

Speaker screws

& brackets

Types of Discs used on this Recorder

DVD+RW

DVD+R

DVD+R DL

DVD-RW

DVD-R

DVD VIDEO

AUDIO CD

VIDEO CD

DATA CD

DATA CD

STANDBY-ON

2

1

2

3

4

1

b

1 b 1 a

Television

To antenna wall jack, cable box or satellite receiver

To connect to your television, follow the instructions under ‘Connection to your TV’. If you have an existing

AV amplifier, follow the instructions under ‘Connection to an amplifier’ instead.

Connection to your TV

Before connecting

Your TV should be connected to the cable box/set-top box, satellite receiver or antenna, unplug the antenna cable from the TV

Connection to an amplifier

Before connecting

Unplug all connections to the AV amplifier and unplug the antenna cable from the TV, below are details for 2 ways to connect your new DVD Recorder/VCR to the AV amplifier

Connecting

Television (back)

Connecting

Follow step 1 to 3 under ‘Connection to your

TV’ before following the instructions below

Television (back)

1

2

3

4

5

To antenna or set-top box

Connect the antenna cable (plugged out from the TV) to ANT-IN jack at the rear of the

DVD recorder/VCR

Connect the provided antenna cable to the

RF OUT jack on the rear of the recorder and into the VHF/UHF/RF IN jack of the TV

Connect the yellow video cable to the yellow

VIDEO IN jack of the TV and to the yellow

AV OUT video jack at rear the DVD recorder/VCR

Connect the red and white audio cable to the respective red and white audio jack of the TV and to the respective red and white AV OUT audio jack at rear the DVD recorder/VCR

Plug in the power cable from the recorder to an AC power outlet

DVD recorder/VCR (back)

To antenna or set-top box

DVD recorder

/VCR (back)

OPTICAL IN

COAXIAL IN

DIGITAL

AUDIO IN

LINE IN

COAXIAL IN

DIGITAL

AUDIO IN

Amplifer

(back)

1 a Use the red and white audio cable (not supplied) to connect the respective red and white AV OUT audio jack on the rear of the recorder to their respective colour audio jacks of the LINE IN or AUDIO IN portion on the rear of the amplifier

OR

1 b Use the coaxial cable (not supplied) to connect the coaxial jack at the audio out portion on the rear of the recorder to the coaxial jack of the LINE IN or AUDIO IN portion on the rear of the amplifier

2 Connect the power cables from the VCR/DVD recorder and amplifier to AC power outlets

Inserting batteries

Remote control

(back)

LIST/DISC

MENU

Note where the positive and negative ends go

Find correct viewing channel

DVD recorder/VCR (front)

6 HEAD HI-FI STEREO

ONE TOUCH RECORDING • LONG PLAY

RECORD

1 Press STANDBY-ON

2

3

Press SYSTEM MENU on the recorder’s remote control

Switch on TV

4 Press ‘0’ on the TV’s remote control, then repeatedly press the Channel Down button until you see the System Menu. This is the correct viewing channel for the home theatre system

Tip In some TVs, to find the correct viewing channel, you can keep pressing the AV or the SELECT buttons. If still unable to find the correct viewing channel, check the connections again or check your TV’s user manual

GENERAL

Auto Programming

Program Edit

Clock Set

TV Aspect

VCR Play Aspect

VCR Play System

AV2 Connection

Progressive Scan

Factory Set

Close

VCR

PAUSE/STEP

2

1

VHS playback

Press VCR on remote control

Insert videocassette into the cassette slot

3

4

Press PLAY if playback does not start automatically

To stop, press STOP

5 Press OPEN/CLOSE to eject the cassette

2

1

VHS recording

Insert videocassette with the record tab still intact into cassette slot

Press DOWN or UP to scroll the

0 9 program you want to record

3

4

5

6

Press REC MODE repeatedly to select a recording mode

Press RECORD to start recording

Tip Press RECORD again to automatically record 30 minutes, every time you press

RECORD adds 30 minutes recording time

Press PAUSE to pause and RECORD again to resume recording

Tip Pause will switch to stop after 5 minutes

To stop, press STOP

Conduct Installation

1

2

In system menu, press RIGHT to select

Auto Programming in General option menu

Tip Use the recorder’s remote control to make your selections

Press RIGHT to select Start

OK

3

Tip If no channels were found, check your antenna connection then see the user manual to start channel search again

STOP

4 Check the options for Clock Set, TV Aspect,

VCR Play Aspect and VCR Play System to make sure they are correct for your TV

Tip If incorrect, use the arrow buttons to correct them

5 Press SYSTEM MENU when finished

OPEN/CLOSE

SYSTEM

MENU

1

DVD playback

Press OPEN/CLOSE

REC MODE

PLAY

2

3

Get a DVD disc and place in the tray with the label facing up

Press OPEN/CLOSE

4

5

Press PLAY if playback does not start

Press DOWN or UP to scroll through the list of options in the DVD menu

6

7

Press PLAY on the option you want

To stop, press STOP

8 Press LIST/DISC MENU to return to

DVD menu

SCART IN

To antenna wall jack, cable box or satellite receiver.

Pr Y

Pb

OPTICAL IN

COAXIAL IN

DIGITAL

AUDIO IN

LINE IN

DVD System (back)

Pr Y

Pb

Television (back)

To antenna or set-top box

Pr Y

Pb

VCR (back)

DVD System (back)

Pr Y

Pb

Pr Y

Pb

SCART IN

AERIAL

RF.OUT

OK

Audio Setup Page

Speakers V olume

Speakers Distance

Night Mode

CD Upsampling

DVD

7

8

9

0

3

4

1

2

5

6

RETURN

DISPLAY TV/VIDEO

SYSTEM

MENU

DVD Recorder (front)

Types of Discs used on this Recorder

System Menu - General

Screen Saver

Country

Video Output Format

Restore Factory Settings

On

UK

NTSC

OK

To exit, press [SYSTEM MENU].

System Menu - General

Screen Saver

Country

Video Output Format

Restore Factory Settings

On

UK

NTSC

OK

To exit, press [SYSTEM MENU].

System Menu - General

Screen Saver

Country

Video Output Format

Restore Factory Settings

On

UK

NTSC

OK

To exit, press [SYSTEM MENU].

OK

ZOOM

AUDIO

FWD

REW

D. DUBBING

THUMBNAIL

CHAPTER

TIMER

TITLE

REPEAT

SEARCH

MARKER

CLEAR

SHOWVIEW

VIDEOPLUS+

DVD Recording

1 For recording get a blank

DVD+RW or DVD+R disc.

Place in the tray with the label facing up and close tray.

Tip

Switch to the DVD Recorder/VCR viewing channel on the TV to see what channel you are recording.

2 Press DOWN or UP to scroll the channels, or press to to select the

TV program you want to record.

3 Press REC MODE repeatedly to select a recording mode.

Tip

For more information about recording modes, refer to the user manual.

4 Press REC to start recording.

Tip

Press REC again to automatically record 10 minutes, every time you press REC adds 10 minutes recording time.

5 Press STOP to end recording.

‘Recording file information. Please wait…’ will be displayed on the TV.

6 Press LIST/DISC MENU to go to the disc menu and press PLAY on the title you just recorded to watch it.

1/1

Title List

DVD+RW

2hour 3min

SP Free

Empty Title

-- / -2:03:00

OK Select DISPLA Y Info REC Close

Types of Discs used on this Recorder

DVD+RW

DVD+R

DVD+R DL

DVD-RW

DVD-R

DVD VIDEO

AUDIO CD

VIDEO CD

DATA CD

DATA CD

Speaker Distance Setup

Center

Rear Left

Rear Right philips

0MS

0MS

0MS

Language

Country

Do ne

English

Unit ed Stat es

Title List

DVD+RW

2hour 3min

SP Free

Empty Title

-- / -2:03:00

OK Select DISPLA Y Info REC Close

1/1

Title List

DVD+RW

2hour 3min

SP Free

Empty Title

-- / -2:03:00

OK Select DISPLA Y Info REC Close

1/1

Speaker Level Setup

Front Left

Front Right

Center

Subwoofer

Rear Left

Rear Right philips

0db

0db

0db

0db

0db

0db

System Menu - Channel Setup

Tuner Input Source

Channel Search

Modify Channel Information

Cable

Search

Edit