Roadmaster RM User manual

USER MANUAL

CAR MULTI-MEDIA AV SYSTEM

1

[CONTENT]

1．FEATURE INSTRUCTION 2

2．USAGE CAUTIONS 3

3．SAFETY ATTENTION 4

4．PANEL FUNCTION DEFINITION 5

5．RE-SETTING UNIT 6

6．BASIC OPERATION 6

7．FUNCTION OPERATIONS 8

7.1 MAIN INTERFACE OPERATIONS

8

7.2 RADIO INTERFACE OPERATION

9

7.3 DVD INTERFACE OPERATION

10

7.4 TV INTERFACE OPERATION

13

7.5 IPOD INTERFACE OPERATION

14

7.6

EXTERNAL VEDIO INTERFACE OPERATION

15

7.7

BLUETOOTH INTERFACE OPERATION

16

7.8

SYSTEM PARAMETER INTERFACE OPERATION

18

7.9 USB/SD CARD OPERATION

20

8. REARVIEW 21

9. CLOSE PICTURE FUNCTION 21

10. GPS INTERFAC OPERATION 21

10.1

NAVIGATION

22

10.2 MEDIA ENTERTAINMENT

22

10.3 BROWSER OF THE PHOTO

24

10.4 MUSIC PLAYER

25

10.5 SYSTEM SETTING

26

10.6 SELECT LANGUAGE

27

10.7 CORRECT SCREEN

28

10.8 SYSTEM INFORMATION

29

11. GPS PARAMETER 30

12. REMOTE CONTROL 31

13. AUDIO KNOWLEDGE 33

14. TROUBLE SHOOTING 36

15. MAIN FUNCTION 38

16. CIRCUIT CONNECTION 39

17. STEERING WHEEL CONTROL 41

1

2

[FEATURE INSTRUCTION ]

T h e AV u n i t p r o v i d e s D V D , R A D I O , G P S ( o p t i o n a l ) , e x t e r n a l C D C ,

AV(output/input), BLUETOOTH, HD TFT , BACKUP VIEW and the standard

POWER OUTPUT(50wx4 ) of function integrated.

Its internal DVD player adopts the high quality DVD deck, which can play DVD、

DVD-9、VCD、DVCD、CD、MP3、CD-R/RW formats etc.

The radio can memorize the AM 12 stations and FM 18 stations.

It has internal Bluetooth function, which can answer and dial the phone conveniently to make your driving safe. At another hand, if mobile phone has

A2DP function, it can play music when Bluetooth is on.

It supports external 6-10 disk of CD/DVD changer adopted the communication protocol of SANYO .

It adopts 6.5" ,16：9 HDTFT that is drove with the advanced microprocessor, and possesses floweriness color, lower power dissipation and reliable performance.

It has an automatic detection backup function to make your backup safe.

It has two video output lines , four audio output lines; two video input lines, one audio input line, so it can connect with external device conveniently;

It' operation system is intelligent and humanistic. It has graphic OSD, not only be operated on panel function buttons but also on TFT touching icons, even using TX to control.

It supports external steering-wheel control without damaging the original car's function to make driver more convenient.

It has manual brake close screen function. When the manual brake close screen line connect to ground, the unit may turn on TFT, otherwise to turn off TFT.

In order to install and use correctly, please read the manual carefully.

2

3

[USAGE CAUTIONS]

1. The unit only support the format of MP3/WMA/JPEG/MPEG which recorded in

DVD-R, CD-R, CD-RW, SD and USB .

2. When you want to format the media device to delete the file, you should use common format, not use fast format, avoiding damage the devices such as USB and SD etc.

3. The setting for MP3/WMA/JPEG/MPEG encoder and CD/DVD recorder.

Using MP3/WMA encoder to compress the audio data into MP3/WMA format , please set the parameters as following:

MP3/WMA:

The Bit Rate of transmitting is: MP3:32-320KBPS

WMA:48-192KBPS

The frequency of sampling is: MP3:32,441.48KHZ

WMA:32,441.48KHZ

Using JPEG/MPEG encoder to compress the AV data into JPEG/MPEG format , please set the parameters as following:

JPEG/MPEG :

JPEG display zone dimension:

Baseline format: 1024(W) X768(H) pixel (MAX)

Continuous format: 1024(W) X768(H) pixel (MAX)

MPEG

Video format: MPEG1, MPEG2

Display zone dimension:

MPEG1: 320X240,352X240(NISC),352X2889(PAL)

MPEG2: 40X480,740X480(NTSC),704X576(PAL)

Audio format: MPEG1, MPEG2

The Bit Rate of transmitting is:2-384KBPSCBR

The frequency of sampling is:32441.48 KHZ

WMA:32441.48 KHZ

4 . W h e n y o u u s e d i s c r e c o r d e r t o r e c o r d t h e m u l t i m e d i a f i l e o f

MP3/WMA/JPGE/MPEG, if the quantity of the multimedia file is too large, you can't record in one disc fully, please add a disc.

5.If you use part of function of Windows Media player 9.0 edition above, may not be able to play the detailed information of compatible format normally at some time.

3

If the size of the picture exceed the limit, part of the picture will not display.

When you record the MPEG2 data using DVD media, you must set the Recording

Format to one time using only.

6.The order of playing MP3/WMA/JPEG/MPEG

The unit seeks the multimedia files or folder in natural number. So it play in natural number from small to big. If your multimedia file is recorded, and its file name is not named as per Arabic numbers (eg: 1.XXX, 2.XXX), the unit will not seek and play in order, and it will enter the status of seeking and playing random automatically.

[SAFETY ATTENTION]

Before installation, please read all the instruction, and suggest you‘d better let the

AV professional install the unit.

The unit adopts 12V car power system which must connect to ground.

Please don't install it on truck or bus with 24V directly, or will be damaged.

You'd better use legal disc, rather than nonstandard disc or bad quality disc; otherwise, it may cause trouble-shoot and reduce using life of the unit.

Without professional guidance, you mustn't exchange the power fuse or use some unsuitible fuse, otherwise, it will cause the unit damaged even fired.

Avoiding violate the traffic rule, the driver can't enjoy program and operate the unit when driving.

For safety and the normal using of the unit, please ask the professional to install and repair it, at the same time to avoid damaging unit and the accident at the same time. Needing detailed information to consult the local professional retailer of AV products.

Don't place the unit in the wet environment or water, avoiding electric shock as the result of short circuit, or other unnecessary damage and fired.

4

Cozy Hint:

In order not to avoid short circuit, please cut off car and the connection of ACC and B+ before installing.

4

5

①

②

③

④

⑤

[PANEL FUNCTION DEFINITION]

13

⑤

⑥

⑦

⑧

①

②

③

④

⑨

⑩

11

12

1 3

POWER BUTTON

MICROPHONE BLUETOOTH

SD CARD OPERATION

USB OPERATION

IR LENS

EJECT BUTTON

DOWN BUTTON

UP BUTTON

VOLUME + BUTTON

VOLUME - BUTTON

MUTE BUTTON

RESET BUTTON

DISC WINDOWS

⑥

⑦

⑧

⑨

⑩

1 1

12

①

②

③

④

⑤

13

⑥

⑦

⑧

⑨

⑩

11

12

5

8

[RESET THE UNIT]

1.Must reset the unit before you use it at the first time or you change the car battery.

2.Must reset the unit when he unit is confused.

3.Press RST button to reset the unit using a tip.

Remark: Pressing RST button will loss clock and memory.

[ BASIC OPERATION]

1. POWER BUTTON

When the unit is connected to the power source, you can press any button to turn on it. At turn on status, you can press this button shortly to shift the main interface to GPS mode. At this state, audio playing is continuous, and the speaker outputs the playing sound, external AV maintain output.When GPS has voice hint, the output of speaker will shift to GPS voice, but the external video output won' t shift.

Press this button shortly again, the unit will shift to the current video. Press this button longer to turn off the unit .

Remark: Note: When GPS is off on the Parameter Interface

,

press any button can turn the DVD on after the electricity connected well shortly or long this button can turn the DVD off

.

,

press

2. EJECT BUTTON

Press this button to eject disc automatically, the disc will insert automatically but not play if isn' t taken away in 10seconds.

3. VOL+/VOL

-

BUTTON

In normal playing state, press (VOL+/VOL-) button to adjust current volume. Press

SEL button or touch slightly left end of volume bar of TFT, press VOL+/VOL- again, it can adjust circularly VOL, BAS, TRE, BAL, FAD, BRI, CON, COL.

4.BAND BUTTON

In the radio mode, press this button to search band circlely as shown: FM1-FM2-

FM3-AM1-AM2-FM1

In normal playing state, press this button to change mode.

5. MENU BUTTON

Playing DVD, press this button to display song list(number)and playing as per selected song number(need disc supporting)

6.MUTE BUTTON

Press it shortly to turn off the mute function, press it shortly again or press

VOL+/VOL- button to turn on the mute function screen

.

Press it long to turn off the

,

press any button or touch anywhere turn on the screen.

8

9

7. MODE SHIFT BUTTON

Press this button shortly to shift system mode. Press this button long to enter into external GPS video interface, At this state, external audio output is continuous, and the speaker outputs the playing sound, only external GPS video shift to TFT interface. If operating any function on panel, the unit shift to current video interface. If having not any operations for 5 seconds, the unit will shift to GPS interface automatically. Press mode long, the unit turn off GPS interface and return to current state.

8. RESET BUTTON

Press it to return to the default setting and memory information will be cancelled.

9. DISC WINDOW

This player reads the disc deck to use is the inspiration type, puts in gently the disc the disc eject, the disc by the automatic, the system can read the disc automatically; In puts the disc before, please deck in the core does not have the disc piece,only then inserts the disc piece.

Notice:

*Asks you to use the standard original disc,and maintains the disc to be clean,forms the good use habit, safeguards this system the normal service life.

*This aircraft accepts the diameter is only the 12 CM disc, please do not have to put in 8CM as well as the shape irregular disc, if inserts forcefully can create the card disc and deck the core structure damage.

*On the disc has the character disc on.

10.SEL BUTTON

Touching SETUP INFORMATION can adjust volume. In the state, touch VOL to adjust volume and effect.

11. BUTTON

* At radio mode:

Pressing it long is manual seeking frequency downwards. When it activated, pressing it slightly is seeking frequency downwards step by step, pressing it long is seeking frequency downwards continuously, pressing it shortly is seeking frequency downwards automatically.

When selected effective frequency, the unit will stop seeking and start to radio.

* At TV mode

Pressing" << " button is seek frequency upward.

* At DVD model

Pressing button is seek song or chapter upward.

9

10

12.

BUTTON

* At radio mode:

Pressing it long is manual seeking frequency upwards. When it activated, pressing it slightly is seeking frequency upwards step by step, pressing it long is seeking frequency upwards continuously,pressing it shortly is seeking frequency upwards automatically.When seeked effective frequency , the unit will stop seeking and start to radio.

* At TV mode

Pressing " >>" button is seek frequency upward.

* At DVD model

Pressing button is seek song or chapter upward.

13. AUDIO BUTTON

Press this button to adjust mono left/right

14.SMART DIAL/ENT BUTTON

Roll right or left to select function, then press for a short time to confirm.

15. TOUCH SCREEN FUNCTION

The used TFT of Unit is touching style. In corresponding OSD interface, touch OSD icon, you can play or operate corresponding function.

[FUNCTION OPERATIONS]

MAIN INTERFACE OPERATIONS

10

11

In main interface, touch any function icon can come into corresponding mode. Press top right corner , or COME BACK BUTTON can come back current playing state .If having not any operation within about 10 seconds, system will automatically come back to current playing state .

RADIO INTERFACE OPERATION

1. Mute button


VOL+/VOL- button to turn on the mute function. Press it long to turn off the screen.

Press any button or touch anywhere on TFT to turn on the screen.

2. BAND SELECTION BUTTON

Press it to shift among FM1, FM2, FM3, AM1 and Am2

3. APS button

Press it shortly to browse and play memorized stations which will last 5 seconds.

Press it long for 2 seconds, the unit seeks automatically frequency in full scope, and memorize automatically found stations from M1 to M6,then return M1 to play.

Remark: when the unit is in seeking station, it is in sleep state. Every band stores 6 channels, FM1, FM2, FM3 can store 18 channels totally; AM1,AM2 can store 12

AM channels totally .

4. button

Pressing it shortly is seeking station downward automatically. When selected effective channel, the unit stop and play. When running, press any button of

M1,M2,M3,M4,M5,M6 long to memorize the current channel in corresponding button.

11

12

Pressing it long is seeking station downward manually. When the operation is activated, pressing it shortly is seeking station downward step by step and pressing it long is seeking station downward continuously.

5. Button

Pressing it shortly is seeking station upward automatically. When selected effective c h a n n e l , t h e u n i t s t o p p l a y i n g . W h e n r u n n i n g , p r e s s a n y b u t t o n o f

M1,M2,M3,M4,M5,M6 long to memorize the current channel in corresponding button.

Pressing it long is seeking station upward manually. When the operation is activated, pressing it shortly is seeking station upward step by step and pressing it long is seeking station upward continuously.

6. LOC Button

Press it to perform shortly/long-distance control.

7.LOUD button

Press it shortly to switch LOUD control, at the same time to display hint in TFT.

8.ST/MO button

In FM band, touch it to shift stereo or mono-channel. When signal is weak, selecting mono-channel can reduce noise.

9. M1-M6 button

Touch any one of M1 TO M6 shortly can sort the memory station.

DVD INTERFACE

OPERATION

12

13

RPT RDM N/P L/R

1. Button

Touch it shortly to turn off mute, touch it shortly again or touch VOL+/VOL- button to turn on mute. Touch it long to turn off the screen. Press any button or touch screen to turn on.

2. Button

During DVD playing disc, press it to stop playing, press again will resume playing.

3. Button

In DVD playing disc state, touch it shortly to select songs upwardly. Touch it long circularly to select the fastback (2*4*8*20*time speed) playing. In fast playing state, touch the button to resume normal playing mode.

4. Button

In DVD playing disc state, touch it shortly to select songs downwardly. Touch it long circularly to select the speed (2*4*8*20*time speed) playing. In fast playing state

;

touch the play button to resume normal playing mode

.

5. Button

When displaying the button, press it to come out more touching buttons.

*

Firstly press button,it will display below interface

:

RPT RDM N/P L/R

13

6. RPT BUTTON

Touch it slightly to select repeating playing chapter, repeating playing name, repeating playing, and close repeating playing.

7. RDM BUTTON

Touch it slightly to open or close RDM play. When being RDM play mode, playing order is out of order.

8. N/P BUTTON

Touch it to shift between audio and video.

9. L/R BUTTON

When playing VCD, touch it to shift between left and right channel.

When playing DVD, if the disc has multi-tracks or multi languages, touch it slightly to shift among multi-tracks and multi languages, if the disc just has mono-track, touching it slightly is useless.

y b t a f :

14

10. MENU BUTTON

Playing DVD disc, press the button to display song list (number), and playing as per selected song number (need disc supporting)

11. BUTTON

Touch it to select upward in current level menu. When needed item selected, touch

OK to run.

12. BUTTON

Touch it to select downward in current level menu. When needed item selected, touch OK to run.

14

15

13.

BUTTON

Touch it to return to last level menu. When needed item selected, touch OK to run.

14. BUTTON

Touch it to return to next level menu. When needed item selected, touch OK to run.

15. BUTTON

When needed item selected, touch OK to confirm.

16. BUTTON

Touch it to stop playing.

17. BUTTON

When playing DVD disc, if DVD disc has several captions, press it to shift among captions. If DVD disc has mono-caption, pressing it is useless.

18. BUTTON

In playing disc state, press it to select circularly the time display of mono-song playing, residual time of mono-song playing , full disc playing , residual time of full disc playing and close playing.

e e f s t V

TV INTERFACE OPERATION

15

16

1.

BUTTON

Touch it shortly to turn off mute, touch it shortly again or touch VOL+/VOL- button to turn on mute. Touch it long to turn off the screen. Press any buttons or touch anywhere in screen to turn on.

2.

BUTTON

Touching it slightly to select upward the stored TV channel.

3.

BUTTON

Touching it slightly can select downward the stored TV channel.

4.

BUTTON

Touching it long, the unit will seek channel in full scope and memorize automatically.

5.

BUTTON

When searched channel is hazy or signal is weak, touch it to adjust upward to calibrate frequency.

6.

BUTTON

When searched channel is hazy or signal is weak, touch it to adjust downward to calibrate frequency.

IPOD INTERFACE OPERATION

I P O D

IPOD:UNKNOWN

MUSIC:001

TIME:00:00:00

11:20

I P O D

IPOD:UNKNOWN

MUSIC:001

TIME:00:00:00

11 :2 0

16

17

1. Button



Press any button or touch mainframe screen to turn on the screen.

2. Button

In IPOD playing disc state, touch it shortly to select songs upwardly. Touch it long to choose the fastback mode. In fast play state, touch the button to return natural playing mode.

3. Button

In IPOD playing disc state, touch it shortly to select songs downwardly. Touch it long to choose the speed mode. In fast play state; touch the button to return natural playing mode.

4. Button

In IPOD play disc state, press it to stop play, press it again to renew play.

EXTERNAL VIDEO FREQUENCY INTERFACE

OPERATION

1.

Button



Press any button or touch mainframe screen to turn on the screen.

2.

SYS

Press it to choose external input video color .

17

BLUETOOTH INTERFACE OPERATION

18

The system provide Bluetooth freehand communication function, if you phone has

Bluetooth and A2DP function, it can set up joint dot vs. dot with the system, in the scene, it can achieve the phoning, telephone answer etc function and play telephone music.

* Partnership

In the system main interface, press the freehand module, enter Bluetooth freehand interface, and open phone function of search new equipment, When system contact with signal, it will cue phone whether connect equipment, phone choice YES and import password 0000 and ensure it, after system contact with phone ,system scène display: it had connect, whether try it again, until it's OK.

1. CONNECT/CUT

After system connect with phone, press “cut” button to cut connection, then press the connect button to renew connection.

2. DIAL PHONE

When system connect with phone, it can import phone number by scene number button, it can directly dial phone number by phone or press televox dial to televox dial number, press take phone button with green.

18

19

*Answer phone

When sb. calls you, in any model, system will automatically change Bluetooth freehand function interface and playing voice is mute of current mode change to ring of incoming telegram, if Bluetooth set up automatism answer, system will automatism answer phone, if Bluetooth don't set up automatism answer, press interface answer or press choice answer or refuse answer. During answer phone, press picture of phone, it can change talk sound to phone, ensure safety which talk information, press picture of Bluetooth, it can change talk sound to loudhailer of car. Incoming telegram number will be display information rim.

3. BACKSPACE BUTTON

In dial number state, When input wrong, press the button to cancel character

Bluetooth playing music operation

In system main interface, you press (freehand mode), enter Bluetooth freehand interface and open phone function of search new equipment, when system contact with signal of phone, it will cue phone whether connect with equipment, phone choice Yes and import code 0000 and ensure it, system will connect with phone, system scene display it had connect. After connect , in system main interface press Bluetooth music freehand mode, enter Bluetooth music interface. Open your phone music play machine, it will play mode set up to AV/earphone, it can play MP3 music which deposited in your phone by car loudhailer.

1. Play/pause button

Press it to play/pause MP3 music of phone deposited.

2. Stop button

Press it to stop play MP3 music, press the play button to renew memory play.

3. Choice song along button

In play MP3 state, press choice song along button to play ahead song.

4. Choice song backward button

In play MP3 state, press choice song backward button to play backward song.

19

SYSTEM PARAMETER INTERFACE

OPERATION

20

DIRECTION BUTTON

Left face button : Press it to adjust operate item parameter descending.

Right face button : Press it to adjust operate item parameter increase

by degrees.

Upward button : Press it to upward choice operation item.

Downward button : Press it to downward choice operation item.

BASIC SETUP

1.Radio

Upward/downward button or direct press choice item, press the item or left/right circulate choice radio area setup.

2. TV

Upward/downward button or direct press choice item, press the item or left/right circulate choice TV setup.

3. Time

Upward/downward button or direct press choice item, press the item or left/right button to adjust time.

20

BASS ﺕﻮﺼﻟا ﺾﻔﺧ ﻭﺃ ﺓدﺎﻳﺰﻟ ﺭﺎﺴﻴﻟا ﻭﺃ ﻦﻴﻤﻴﻟا ﻢﻬﺳ ﻭﺃ ﺓﺮﺷﺎﺒﻣ ﺮﺼﻨﻌﻟا ﻂﻐﺿا ﻭﺃ ﻞﻔﺳﺃ ﻭﺃ ﻰﻠﻋﺃ ﺭﺰﻟا ﻂﻐﺿا

21

4. CLK

Upward/downward button or direct press choice item, press the item or left/right button to change 12H,24H.

5. CLK SW

Upward/downward button or direct press choice item, press the item or left/right button to choose open or close time display.

6. BEEP

Upward/downward button or direct press choice item, press the item or left/right button to choose open or close beep.

7. GPS ON/OFF

direction key choose the item chooses turn on or turn off to the GPS. In the GPS off mode, GPS off, can' t enter the GPS. Press main page can' t use the “GPS” icon.

AUDIO SETUP

1. BAS

Upward/downward button or direct press choice item, press the item or left/right button to step up or depress bas.

2. TRE

Upward/downward button or direct press choice item, press the item or left/right button to step up or depress tre.

3. BAL

Upward/downward button or direct press choice item, press the item or left/right button to adjust bal.

4. FAD

Upward/downward button or direct press choice item, press the item or left/right button to adjust fad.

LOUD

After you use the direction key of up and down or click once to select the option directly, click it once or use the direction key of left and right to circle selecting the loud control of opening or closing .

21

22

EQ

After you use the direction key of up and down or click once to select the option directly, click it once or use the direction key of left and right to circle selecting the audio mode.

VIDEO SET

BRIGHT

After you use the direction key of up and down or click once to select the option directly, click it once or use the direction key of left and right to adjust the brightness.

COLOR

After you use the direction key of up and down or click once to select the option directly, click it once or use the direction key of left and right to adjust the color.

CONT

After you use the direction key of up and down or click once to select the option directly, click it once or use the direction key of left and right to adjust the contrast.

MODE

After you use the direction key of up and down or click once to select the option directly, click it once or use the direction key of left and right to circle selecting the

USER mode、STD mode(the standard mode ) 、SOFT mode 、BRIGHT mode.

PARK ON/OFF

Press up/down button or direction key choose the PARK. Press up/down button or direction key choose the item chooses turn on/off to the PARK.

In the PARK ON mode, the PARK (cathode) to be able to watch on the lcd screen

;

In the PARK OFF mode

,

the PARK( cathode) to be possible to watch on the LCD screen

.

USB/ SD CARD OPERATION

1.SD CARD OPERATION

*.SD card as mobile storage device, can save MP3, WMA, JPEG, and MPEG video file. Insert compatible SD card to card reader, can play diversified file. Open TFT screen, insert SD card to card reader seat slightly, enter main menu to choose SD card mode, or press MODE play.

The idiographic operation of playing audio file is similar MP3 play mode. The idiographic operation process of playing video file is similar VCD, DVD. Please check relative introduction of this manual.

*.Insert the SD card (face the label surface on ) to SD Jack, then it plays the item in

SD card.

22

23

Note：When hearing a light sound means the card is inserted well. When needed to withdraw SD card, at first push SD card in until a “KAKA” sound is heard, while can take out the SD card.

2. USB OPERATION

USB as a mobile memory can record documents like MP3, WMA, JPEG and

MPEG. The various documents can be played when connected the compatible

USB device to the unit. After insertd USB, can enter into the main menu to select

USB mode or press "MODE" button on the TFT directly to select USB mode, then according to the memory documents' format to play. The specific operation of playing audio documents is as same as the MP3's, and the video documents' playing is similar to the DVD's. Pls refer to relative introduction for details.

[ REARVIEW]

If the car install the rearview, when it move back, the system will switch rearview condition automatically, and display what it took on the screen, make sure the safety of moving back car. During the driving, if you want to know the condition at the back, you can press the icon CCD on the homepage to enter to the rearview interface. When the system enter to the rearview video interface, while the current condition is play, then the loudspeaker output the sound of the current play condition, and the external audio and video output are all in the current condition.

[ C

LOSE PICTURE FUNCTION

]

For the sake of your driving safely, the unit has the close picture function when driving,(connect manual brake close screen testing wire to the car' s brake power switch. If you want to cancer this function, you can ground the manual brake close screen testing wire),you can' t watch the graph until your park.

Close mode

When driving in the night, in order to protect the sight of driver, secure safety of driving, on any mode of playing, long press " MUTE" key, system will close display screen, but will maintain playing. Click any key on touch screen or press any on the panel to exit close mode.

[ GPS INTERFACE OPERATION]

Click the icon concerned of the main interface ,and you can use the corresponding function provided by the navigation system.

23

24

[set before use]

Before using GPS,must set it as following method,then to operate the GPS.

1.TOUCH SCREEN CALIBRATION.

Detailed operation as following:

At main consol interface:

1.Touch "set" icon

24

25

After touch "touch screen" icon,as following picture:

2.Touch "touch screen ion”

After touch"touch screen icon",come into the following interface,as following picture:

Touch " " icon for 1 second at least,as following picture:

Touch "touch screen ion”

3.Touching " “ icon

After loosed,"+"move to top left coner,as following picture:

25

Touching " " again,as following picture:

4.Touching “ " icon again

After loosed," picture.

" move to button-left coner automaticlly,as following

Touch " " again,as following picture:

5.Touching “ " icon again

26

After loosed, “ " come to button-right coner,as following picture:

26

27

Touching “ ” ,as following picture:

6.Touching “ “ icon again

After loosed, “ ” move to top-right coner,as following picture:

Touch “ ” again,as following picture:

7.Touching “ “ icon again

27

After loosed, “ ” will be disppeared automatically,then display "OK",as following picture:

Touch "OK" finally,as following picture:

8.Touching "OK“ finaly.

Finshed above operations,system return to main console inferface:

28

If not displaying "OK" indicate calibration is failure.the cause is touching

"+" is too short,please repeat above opertions until the "OK" is displayed.

28

29

2.SET DIRECTION FOR NAVIGATION SOFTWARE.

Before using the GPS,must set direction for navigation software, detailed operations as following:

Insert SD with map to SD socket,then connect the GPS to car AV system correctly, turn on the AV unit, come into AV main interface, then touch

"GPS" icon to come into GPS interface, as following Picture:

Touch "set" icon at first,as following picture:

1.Touching “ SET " icon

29

After finished above operation to come into set interface,as following picture:

When coming out above interface,touch"navigation set" to set,as following picture:

2.Touch "navigation set" long button

Touch it to come into set interface,as following picture:

30

Touch "open file" icon again,as following picture:

3.Touch "open file"icon

30

31

Touch"open file" icon to come into the following interface:

Then double touch "StorageCard" quickly or touch "OK" directly, as following picture:

4.double touch "StorageCard”

Or touch "OK" directly

After touched,display the following interface:

Double touch "RtNavi" quickly or select "Rtnavi",then touch "OK" as following picture:

5.Double touch "RtNavi”

Or select the file, then touch "OK"

31

After touched,display the following interface:

Double touch "Rtnavi.exe" or select "Rtnavi.exe",then touch "OK".After these operations,system retuan to navigation set interface,as following picture:

6.Double touch "RtNavi”

Or select the file, then touch "OK"

Return to navigation interface set:

32

Then tick select "Auto run navigation when imtiating",then touch "exit" button,or exit the set interface:

6.Touch here exit

7.Touch here

32

33

Return to set interface:

After above opertions,seting direction is sucessful !

3. TIME SET

At main console

1.Touch "set" icon

2.Touch next page button

33

Come into next interface:

3.Touch "time" button

Come into the following interface.

Introduction for the buttons of the interface:

Up adjust

Left adjust Down adjust

Introduction for the zone of the interface:

Right adjust

Exit

34

Date set, format:Mon.Date.Year

2042-12-03

Time set.Format:

H/M

0:56

Country/Kegion set.

According to above introduction comtent,set country and region date and time.

34

[OPERATION INTRUCTION]

After finished set before use,the following will describle the specific operation for all interface,Pls read carefully to avoiding non-proper operation!

CONSOLE INTERFACE INTRODUTION:

Display current ststus

Console

Set

Time

Remark:The console interface is default.

last page next page

1.Navigation

The navigation fuction will run just when the SD card has been storeed navigation map,or is invalid,the following will intruct the fuction according to Rtnavi software ,the use of the other map refer to its instrution.

1.Thouch "Navigation" button

Come into "Rtnavi" Interface,as following picture:

Wating for a moment,...will come out the following picture:

36

After touched,come into the following interface:

ACC NO REJ

2.Thouch "ACC" button

Come into “desination ADD”interface, as the following page

3.Touch "Menu" button


4.Touch "Real Navigation"button

36

37


5.Touch"Name index“ button


The zone is for manual input desination address and start adderess

Input method,Writ

For Example:Input Guangzhou railway station.

Display content

When input error,click the button delect the false antents

After touch,come into the following interface:

6.Touch "enter" button

7.Touch here

37

38

After touch,come into the following interface:

8.Touch "Start navigation" , operation completed

When car move forward,the screen cross move as car to perform site navigation.

2.ELECTRONIC BOOK

At console state

Come into "Electronic book" interface:

1.Touch "Electronic book" button

2.Touch "File package"button

After touch,come into following interface:

3.Touch "XXX.txt"file, to read it!

38

39

After touched,as following picture:

Up scroll

Down scroll

Page search

Exit

If you want to read page 12,touch"Page search”:

After touched,as following picture:

Delete key,Delete

Backspace

Enter

Exit

Number button

Click Number button 12 to input 12.

4.Click "Enter”

4.Touch"Page search"

39

Display No12 page,as following picture:

Status: Page 12 of 18

If want to give up read,click exit,the operation as following:

40

5.Click "Exit" button

Remark:Electonic book file is with".txt",other format can not support.

3.Music

At console interface status

1.Click "Music”

40

41

Come into music inferface,as following:

Volome

Last song

Circular/RDM play

Play/Pause

Next song

Song list

Progress bar

Mute ON/OFF

Open Adio file

Open

Del

Up scroll

Down scroll

Exit

2.Click here

As the following interface:

3.All file

OK

4.Click OK

41

After touched above operations,come into the following interface:

5.Click " " to play

4.Picture

At main console interface:

42

Come into main interface:

Rotale clockwisely

Full creen

Zoom +

Zoom

_

1.Click "Picture" button

Open

Sliede

Up scroll

Down scroll

Exit

2. Open picture file

42

43

Come into the following interface:

3.Choose File

4.Click "OK" button

After finished above operations,as the following interface:

n e

, d , f , l g w g i e p o e

e e r o

.

o

5.Film

At main console interface

1.ClicK " Down scroll ".

43

After click "Down scroll",as the following interface:

44

2.click "FILM" button.

Come into FILM interface :

3.Click here to open film file.

After clicked,come into the following interface:

4.Select the file .

5.Click "OK" again

After click,as the following interface:

6.Click " " to play film

44

45

Operation interation as following picture:

Last file

Full screen

Play/ pause next file

FIle list and screen shift

Open

Del

Up scroll

Down scroll

Exit

Click “ " to full screen,or click anyewhere in screen to play full screen, as the following picture:

Click anywhere of screen to exit:

According to your requirement to operate,as the handlook is limited, we just descrike the basic operation.

45

46

SYSTEM MAIN INTERFACE SET

At main console stale:

1.Click "SET” button

Come into set interface:

1.NAVIGATION SET

Refer to page 27

2.NORMAL SET

1.Click " USUAL SETUP " to set normal parametes

46

47

Come into normal set interface,as the following picture:

Tick click to turn off mute, cance " " to open mute.

Click " < " to decrease volume

Click " > " to Increase volume

Scroll left

Button Voice

Click "< " " > " to select 3 mode circularly: mute Weak

Strong

Scroll right

Exit

Language

Click " < " " > " to select 3 mode circularly:

Simply Chinese Engliah Classic Chinese

3.GPS monitor

1.Click "GPS monitor" button

47

Come into the following picture:

Waiting a moment..., as following picture:

(Above picture is sentensit of sattellite data and signal)

2.Click " ? " icon to come into menu Introduction interface

48

After click, as the following interface:

Click "GPS reset" to reset

GPS Automatically

48

49

4.Click here to come into sattellite

Data Stream interface

After click,as the following picture:

After click,as the following picture:

5.Click this icon to come into Longitude

Latitude and time set interface.

6.Click this icon exit

As following picture:

49

4.TOUCH SCREEN

Refer to P22

5.SCREEN

At main console state

50


1.Chilk “ " scroll downward

1.Chilk this icon to come into screen interface.


1.Chilk this icon to come brightness set interface

50

51


Chick "right-left" seroll button to adjust parameter!

Return to screen interface:

resume default button

4.click "adjust size " into

Size adjustment interface


Click ">""<" to adjust vertical,horizon parameter, then click "OK" to confirm.

51

Return to screen set interface:

As the following picture:

5.Click "adjust position" to come into position set interface.

52

Click ">""<" " " " " to adjust parameter,the click "OK" to confirm.

6.TIME

Refer to P31

7.SKIN

At main interface state:

1.Click "skin" button to come into skin interface.

52

53

As the following picture:

Click ">""<" to adjust effect,click to exit.

8.SYSTEM

At main interface state:

1.Chick " system " to come into system set interface.

As the following picture:

To resume default set.

When system file is confused, click it to repair them.

2.Exit

53

54

[ GPS PARAMETER]

SYSTEM PARAMETER

Main frequency

Main CMOS chip

Memory

Storage

Navigation software memory

Operation system

Software translate and edit type

SD card or built-in NAND FLASH

5.0 CORE

GPS HARD PARAMETER

CMOS chip group

Frequency

C/A CODE

Channel Number

Tracking sensitive degree

Orientation precision data updated frequency

Velocity

20 Channel

54

55

4

5

1

2

3

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

[REMOTE CONTROL]

4

5

1

2

3

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

55

1

2

3

POWER

MODE(shift)

BAND/SYSTEM shift

4

NAVIGATION

5

NAVIGATION

6

STOP

7

NAVIGATION

8

Receiver auto search/ replay

9

Single channel/Stereo transfer/

Program play

10 transfer long distance to short

range/ Play random

11

Frequency degression

12

Playback Broadcast Menu

13

Screen menu

14

MUTE

15

PLAY/PAUSE

16 caption shift

17

TITLE display

18

SETUP

19

NAVIGATION

20 long playing

21

Angle transfer

22

ZOOM

23

VOLUM step up

24

Frequency step up /next song

25

SEL(Audio frequency control)

26

Frequency step up /next song

27

VOLUM DOWN

28

SELECT STATION/SONG BUTTON

29

GOTO (Jumps play)

56

REMOTE CONTROL’S BASIC OPERATION:

AUDIO

Press it to cut the movie dubbing language gradually. It has the functions such as

5.1-track output, stereo output and L/R track output

ANGLE

Some DVD disc may be taken views from different angle at the same time. Press the key to enjoy the same view from different angle

SUBTITLE

Press it to cut gradually the captions language

PRG

After press program key, press the digital to input the order of the title/ Songs. Then press the key to play.

56

57

[ AUDIO KNOWLEDGE]

dvd basic knowledges

sign knowledge of dvd 12cm diameter Feature longest time to play

Double-decked(dvd-9) 242 Minute

monolayer (dvd-10) 266 Minute

Double-decked(dvd-18) 484Minute bosseyed, monolayer (dvd) mpge2 74 Minute bosseyed, monolayer cdda 74 Minute

sign knowledge of DVD disc

Sign signification

Show the sound orbit number of disc record, at most eight sound orbit in one disc

Show the disc can offer with multiple subtitle display.

Show the view angle number of shooting image(at most nine angles)

57

58

Show the selected image scene ratio. “LB” letter box “PB” camera leans scan. The left picture means can transfer form the 16:9 image

mail box

T he sign disc playing zone code

Area1: USA, CANADA, Island on Pacific Ocean east

Area2: JAPAN, Western Europe, North Europe, EGYPT, Southern

Africa, Middle East nation

Area3: Taiwan, Hongkong, South Korea, Thailand

Area4: Australia, New Zealand, South Asia,

Island on Pacific Ocean South, Oceania

Area5: Russia, India, Mongolia, East Europe, Central Asia,

North Korea, North Africa,

Area6: china

storage of Disc

When disc is not in using, put it back stand in disc box. Please keep

The Disc away from too cold, wet or heat sources.(including sunshine sources). Don’t stick paper on tape to the disk, or use disc with pencil, ball pen or other write tool with tip, which may hurt the disc.

Don’t let your disc in sunshine or in too hot environment.

Don’t use Alcohol, thinner or cleaner which are sold in market, or water used in gramophone disc more maintenance of disc, please see the disc explain.

Don’t enter many disc in the unit once!

58

59

can not use disc

The disk will circumrotate at a high speed in the unit. If you find the disc break, disrepair, crinkle or with other damages, please don’t run a risk to use in the unit, which may damage the unit.

The unit can only play natural disc. Don’t play the anomalistic disc. The effect by playing the anomalistic disc, we don’t bear any responsibility.

About CD

When input or takeout the disc, don’t left fingerprint, dust or tom tag. Please hand the inside edge of the disc.

Dirty or disfiguring disc will cause jumping-sound when in playing.

Also to pay attention not scrape the side with label, however, this side not much easy to damage as the REC side, but it also can lead it not to use.

If there are fingerprints or dust on the disc surface, clean the discs with soft dry cloth, follow the picture, wipe from the center out.

Gently clean as beeline from the center. Don’t clean the disc surface along circle track. If possible, downright clean the disc use cloth dipping with alcohol or cleaner which are sold in market for CD/DVD. Don’t use alcohol, thinner, or other leaner, include the products designed or clean ethane disc.

59

60 60

61 61

62

[MAIN FUNCTION]

Main Function :

work voltage : DC 12V

Work voltage Range : 10.8V – 16V

MAX Work Current : 10A

Build-in Angle ; Front & Back angle ≤3 0°

DVD/CD PLAYER

Su p p orte d Fil e Fo rm at s: D VD -R , DV D- RW , DV D+ R , D VD+ R W, CD - R, CD - RW ,

CD -DA , M P3, W MA, H D C D , S V C D, VC D , MPG E , JPE G

AU D IO S/ N---- -- - - - - - - 8 5 dB A

A CT B O UND- --- --- - - - - 9 5 D b

Fr e q uen cy Rang e - - - - - - - - 20 H z -20 k Hz

Di g ital A udi o Sam p l e - - - - - --2 4 bit

E SP:

- --- - --- ----- -D V D 2 - 3 s

-- --- - --- ----- CD - D A 1 0 s

- -- - ---- --- ---M P 3 1 0 0 s

- --- - ---- --- --W M A 2 0 0 s

MS P: -- ----- --- - - - - - 1 0 - 2 0 0Hz , X/Y / Z : 1.0 G

P o wer Ou tpu t : -- -- -- -- -- -- -- -5 2W×4 I mp ed an c e:4Ω

S/N R a tio : - --- - - - - - - - - - - -70 d Bu

Fr equ e ncy R ange : - - - - - - --- - --- 2 0Hz - 2 0kH z

Video

Sy ste m : - --- --- - - - - - N T S C, PA L ( Aut o i den t ify )

O utp u t: --- --- -- -- -- 1V p- p( 75Ω)

I nput : -- --- --- - - - - 1 V p - p(7 5Ω)

FM

Fre q uenc y : --- -- -- -- -- - 87 .5 M Hz – 1 08 .0 MH z

Se n siti vit y(-30 dB ): -- -- -- -- -- -1 5d B

S /N Rat io : (-50 dB ): -- -- -- -- -- -6 0d B

Fre q uen cy Rang e : - - - - - - - --- - --3 0 Hz -1 5 kHz ( 3dB )

AM

Fr equ e ncy R ange : - - - - - - - - --- - -52 2 kHz - 1 620 k Hz

S ens i tivi ty( SN= 2 0 d B ) : - - --- - --- - -20 d Bu

Im a ge rej ect ion : - - - - - - - --- - -60 d B

F req u enc y:--- -- - - - - - - - - 5 0Hz - 2kH z

62

63

3

2

1

Fuse box (15A)

3

C YELLOW B GREEN A BLUE

2

4

1

3

6 5

2

4

1

3

6 5

3 2

1

8

5

7

4

6

2

1

1

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

IPOD connection

GPS connection

Radio antenna jack

GPS antenna jack

TV antenna jack

[ CIRCUIT CONNECTION]

3

2

1

Fuse box (15A)

3

C YELLOW B GREEN A BLUE

2 1

6

4

5

3

2 1

6

4

5

3

3

5

2

8 7

1

4

6

2

1

1

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

IPOD connection

GPS connection

Radio antenna jack

GPS antenna jack

TV antenna jack

63

64

3

WIRE WIRE-TERMINAL FUNCTION WIRE

A1

A2

A3

A4

A5

A6

A7

A8

B1

B2

Grey-White

Brown-White

Black-White

/

Black-Yellow

Grey-Red

Brown-Red

Black-Red

Black-Yellow

Grey-Yellow

FL

RL

LIN

GND

CAM

FR

RR

RIN

Vout 1

Vout 2

B3

B4

B5

B6

C1

C2

C3

C4

C5

C6

WIRE-TERMINAL

/

/

Brown-Yellow

Black-Yellow

/

/

Black

Blue

Green

Grey

FUNCTION

GND

/

Vin1

Vin2

/

/

Steering-GND

IR IN

S -

S -

2

WIRE COLOR

1

Purple

Purple/black

2

3

4

Grey

Grey/black

5

White

6

White/black

7

8

Green

Green/black

FUNCTION

Right Rear speaker

Right Rear speaker

Right Front speaker

Right Front speaker

Left Front speaker

Left Front speaker

Left Rear speaker

Left Rear speaker

1

WIRE COLOR

1

Brown

FUNCTION

Manual brake close screen testing line

Back draft radar testing line 2

Pink

3

4

Red

5

Blue

ACC power

AMP control

Orange

6

Illumination

Battery 12V

7

Yellow

8

Black Ground

3

A1

A2

A3

A4

A5

A6

A7

A8

B1

B2

WIRE WIRE-TERMINAL

Grey-White

Brown-White

Black-White

/

Black-Yellow

Grey-Red

Brown-Red

Black-Red

Black-Yellow

Grey-Yellow

FL

RL

LIN

GND

CAM

FR

RR

RIN

Vout 1

Vout 2

FUNCTION WIRE

B3

B4

B5

B6

C1

C2

C3

C4

C5

C6

WIRE-TERMINAL

/

/

Brown-Yellow

Black-Yellow

/

/

Black

Blue

Green

Grey

FUNCTION

GND

/

Vin1

Vin2

/

/

Steering-GND

IR IN

S -

S -

64

65

* Typical circuit

graphic

Connect the control wire to the steering

[STEERING WHEEL CONTROL]

* Voltage value of the buttons on steering wheel:

(

V n

* Typical circuit

graphic

Connect the control wire to the steering

ATTENTION:

When installation, take off the two screws for anti- shock of deck at first.

65

No results