advertisement
Multimedia Projector
MODEL
PLC-WXU30
Network Supported
❏
Wireless LAN
IEEE802.11b/g
❏
Wired LAN
100-Base-TX/10-Base-T
Memory Viewer
❏ SD Card Memory Viewer
✽
Refer to the owner’s manuals below for details about network and memory viewer function.
■
Network Set-up and Operation
■ Memory viewer
Owner’s Manual
Features and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use.
This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display
(LCD) technology.
◆
Compact Design
This projector is designed compact in size and weight.
It is easy to carry and installed anywhere you wish to use.
◆
Capable of 360-degree Projection
This projector is capable of 360-degree projection.
*Some restriction required, see page 8.
◆
Antitheft Alarm Function
This projector is equipped with an Antitheft alarm function which sounds when vibration is detected
(pp.58–61). A built-in rechargeable battery is used for the alarm.
◆
Simple Computer System Setting
The projector has the Multi-scan system to conform to almost all computer output signals quickly (p.32). Up to
UXGA resolution can be accepted.
◆
Useful Functions for Presentations
- The digital zoom function allows you to focus on the crucial information during a presentation (p.39).
- Blackboards* can be used as a projection screen.
*The board color is limited to Green (pp.36, 43).
◆
Power Management
The Power management function reduces power consumption and maintains the lamp life (p.52).
◆
Lamp Control
Brightness of the projection lamp can be selected
(pp.28, 53).
◆
Quick Termination
The AC power cord can be unplugged immediately after turning off the projector without waiting for the termination of the cooling fan rotation (p.23).
◆
Logo Function
The Logo function allows you to customize the screen logo (pp.49–50). You can capture an image for the screen logo and use it for the starting-up display or between presentations.
◆
Multilanguage Menu Display
Operation menu is available in 16 languages; English,
German, French, Italian, Spanish, Portuguese, Dutch,
Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean, and Japanese (p.47).
◆
Security Function
The Security function helps you to ensure security of the projector. With the Key lock function, you can lock the operation on the top control or remote control
(p.54). PIN code lock functions prevents unauthorized use of the projector (pp.22, 54–55).
◆
Helpful Maintenance Functions
Lamp and filter maintenance functions provide for better and proper maintenance of the projector.
◆
LAN Network Function
This projector is loaded with the Wired and Wireless
LAN network function. You can project an image on a computer as well as operate and manage the projector via network. For details, refer to the owner’s manual
“Network Set-up and Operation.”
◆
Memory Viewer Function
Insert the dedicated SD card memory into the projector to project images or presentation data stored within. You do not have to carry computers or other equipment for a presentation.
*SD card memory is not supplied with the projector.
For details, refer to the owner’s manual of Memory viewer.
◆
Input Search Function
Input signal can be searched automatically. (p.51)
✔ Notes:
• The On-Screen Menu and figures in this manual may differ slightly from the product.
• The contents of this manual are subject to change without notice.
3
Table of Contents
Features and Design . . . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . .
To the Owner . . . . . . . . . . . . . . . . . . . . . . . . . .5
Safety Instructions . . . . . . . . . . . . . . . . . . . . .6
Installing the Projector in Proper Directions
Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Part Names and Functions . . . . . . . . . . . . .10
Remote Control Battery Installation
Remote Control Operating Range
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Connecting to Video Equipment 20
Connecting to Component Video Equipment 21
Basic Operation . . . . . . . . . . . . . . . . . . . . . .
How to Operate the On-Screen Menu
Computer Input . . . . . . . . . . . . . . . . . . . . .30
(RGB: Computer 1 (Analog)/Computer 2 ) 30
(RGB(PC digital), RGB(AV HDCP))
For zooming in and out the images 39
Video Input . . . . . . . . . . . . . . . . . . . . . . . . . .0
Input Source Selection (Video, S-video) 40
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Antitheft Alarm Function . . . . . . . . . . . . . . .58
How to use Antitheft Alarm Function 58
Maintenance and Cleaning . . . . . . . . . . . . .6
Cleaning the Projector Cabinet
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Indicators and Projector Condition
Compatible Computer Specifications
Trademarks
Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation.
To the Owner
Before installing and operating this projector, read this manual thoroughly.
This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in good condition for many years to come.
Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.
If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “Troubleshooting” section in the back of this booklet. If the problem still persists, contact the dealer where you purchased the projector or the service center.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK) . NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT .
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL .
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNER'S MANUAL
WITH THIS UNIT.
NOTE: This symbol and recycle system are applied to EU countries only and not applied to the
countries in the other area of the world.
Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste collection/recycling centre. In the
European Union there are separate collection systems for used electrical and electronic products.
Please help us to conserve the environment we live in!
READ AND KEEP THIS OWNER'S MANUAL FOR
LATER USE .
Safety Precaution
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE .
– This projector produces intense light from the projection lens. Do not stare directly into the lens, otherwise eye damage could result. Be especially careful that children do not stare directly into the beam.
– Install the projector in a proper position. Otherwise it may result in fire hazard.
– Allowing the proper amount of space on the top, sides, and rear of the projector cabinet is critical for proper air circulation and cooling of the unit. The dimension shown here indicate the minimum space required.
If the projector is to be built into a compartment or similarly enclosed, these minimum distances must be maintained.
SIDE and TOP REAR
0.7’(20 cm)
1.5’(50 cm) 3’(1 m) 1.5’(50 cm)
– Do not cover the ventilation slot on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous.
– If the projector is unused for an extended time, unplug the projector from the power outlet.
CAUTION
DO NOT SET THE PROjECTOR IN GREASy, WET, OR
SMOKy CONDITIONS SUCH AS IN A KITCHEN TO PREVENT
A BREAKDOWN OR A DISASTER . IF THE PROjECTOR
COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAy
BECOME DETERIORATED .
CAUTION
Not for use in a computer room as defined in the
Standard for the Protection of Electronic Computer/Data
Processing Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle que définie dans la norme ANSI/NFPA 75 Standard for Protection of Electronic Computer/Data Processing
Equipment.
5
Safety Instructions
All the safety and operating instructions should be read before the product is operated.
Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line surges.
Do not expose this unit to rain or use near water... for example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector.
Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit approved by the manufacturers.
An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
Slots and openings in the back and bottom of the cabinet are provided for ventilation, to ensure reliable operation of the equipment and to protect it from overheating.
The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.
This projector should not be placed in a built-in installation such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector.
Do not install the projector near the ventilation duct of airconditioning equipment.
This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company.
Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it.
Do not attempt to service this projector yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Unplug this projector from wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the projector to normal operation.
e. If the projector has been dropped or the cabinet has been damaged.
f. When the projector exhibits a distinct change in performance-this indicates a need for service.
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons.
Upon completion of any service or repairs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condition.
6
Air Circulation
Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.
CAUTION
Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.
– Do not put any flammable object or spray can near the projector, hot air is exhausted from the air vents.
– Keep the exhaust vent at least 3’ (1 m) away from any objects.
– Do not touch a peripheral part of the exhaust vent, especially screws and metallic parts. These areas will become hot while the projector is being used.
– Do not put anything on the cabinet. Objects put on the cabinet will not only get damaged but also may cause fire hazard by heat.
Cooling fans are provided to cool down the projector.
The fans’ running speed is changed according to the temperature inside the projector.
Moving the Projector
Safety Instructions
When moving the projector, replace the lens cover and retract adjustable feet to prevent damage to the lens and cabinet.
When the projector is not in use for an extended period, put it into the supplied carrying case with the lens side up.
CAUTION
The carrying case (supplied) is intended for protection against dust and scratches on surface of the cabinet, and it is not designed to protect an appliance from external forces. Do not transport the projector by courier or any other transport service with this case, otherwise the projector can be damaged. When handling the projector, do not drop, bump, subject it to strong forces, or put other things on the cabinet.
CAUTION IN CARRyING OR TRANSPORTING
THE PROjECTOR
– Do not drop or bump the projector, otherwise damages or malfunctions may result.
– When carrying the projector, use a suitable carrying case.
– Do not transport the projector by courier or any other transport service in an unsuitable transport case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer.
– Do not put the projector in a case before the projector is cooled enough.
Air Intake Vent
Exhaust Vent
(Hot air exhaust)
Air Intake Vent
Air Intake
Vent
7
Safety Instructions
Installing the Projector in Proper Directions
Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard.
This projector can project the picture upward, downward, or backward, perpendicular to the plane of the screen as shown in the figure below.
10˚
10˚
50º 50º
Bottom
Downward
(Usual)
Front
Upward
Bottom
Upward
Front
Downward
Be sure to set the Fan control in MAX in the setting menu when the projector is inclined between +40 degrees to +140 degrees to the horizontal plane (p.56).
Positioning Precautions
Avoid positioning the projector as described below when installing.
40º
Fan Control
"Max"
180º
Fan Control
"Normal"
0º
40º
Do not put the projector on either side to project an image.
0º
NG
GOOD
180º
-50º
10 ˚ 10˚
In upward projection, do not tilt the projector over 10 degrees right and left.
8
10 ˚ 10 ˚
In downward projection, do not tilt the projector over 10 degrees right and left.
Compliance
Federal Communications Commission Notice
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.
Model Number : PLC-WXU30
Trade Name : Sanyo
Responsible party : SANYO FISHER COMPANY
Address : 21605 Plummer Street, Chatsworth, California 91311
Telephone No. : (818)998-7322
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Underwriters
Laboratories (UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician.
GROUND
AC Power Cord for the United Kingdom:
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus
ASA
. If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug
(i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions.
If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed.
The end of the flexible cord should be suitably prepared and the correct plug fitted.
WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET
OUTLET .
The Wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow Earth
Blue . . . . . . . . . . . Neutral
Brown . . . . . . . . . Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
WARNING: THIS APPARATUS MUST BE EARTHED .
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILy ACCESSIBLE .
9
Part Names and Functions
Front
Back
!0
q w e r t y u i o
✽
Bottom
!7
!2
!1
!2
!3
!4
!8
!5
!6
!9
q Alarm Speaker w Infrared Remote Receiver e WIRELESS Indicator r Focus Lever t Projection Lens y Zoom Ring u Top Controls and Indicators i Lens Cover
CAUTION
Do not turn on a projector with lens cap attached. High temperature from light beam may damage lens cap and result in fire hazard.
o Air Intake Vent
!0
Exhaust vent
CAUTION
Hot air is exhausted from the exhaust vents. Do not put heat-sensitive objects near this side.
!1
Speaker
!2
Air Intake Vent (back and bottom)
!3
Terminals and Connectors
!4 Power Cord Connector
!5 SD Card Slot
!6
LAN Connection Terminal
!7
Lamp Cover
!8
Filter
!9 Battery Cover
@0 Adjustable Feet
✔ Note:
e WIRELESS Indicator and ! 6
LAN Connection Terminal are for the Network function. Refer to the owner’s manual “Network Set-up and
Operation”.
✽ Kensington Security Slot
This slot is for a Kensington lock used to deter theft of the projector.
* Kensington is a registered trademark of ACCO Brands
Corporation.
10
@0
Rear Terminal
q w e r t
Part Names and Functions
y u
KB3AC
SD i o !0
!1
!2
!3
!4
!5
q R/C jACK the wired remote control to this jack with a remote control cable (not supplied).
w USB (Series B) control and use the PAGE ed buttons on the remote control during a presentation, connect the
USB port of the computer to the USB terminal with a USB cable (not supplied) (pp.13, 19).
e SERVICE PORT
This jack is used to service the projector. r COMPUTER IN /COMPONENT IN
Connect the computer or component video (or RGB
Scart) output signal to this terminal (pp.19, 21).
Use the supplied VGA cable or a Component-VGA cable commercially available.
t MONITOR OUT
This terminal can be used to output the incoming
RGB analog signal from COMPUTER IN 1 and
COMPUTER IN 2/COMPONENT IN terminal to the other monitor (p.19).
y COMPUTER IN 1/DVI-I
Connect computer output (Digital/Analog DVI-I type) to this terminal (p.19).
u LAN Connection Terminal
Connect the LAN cable (refer to the owner’s manual
“Network Set-up and Operation”).
i ALARM buttons
Use these buttons when setting up the Alarm function (pp.58–59).
o VIDEO IN
Connect the composite video output signal to this jack (p.20).
!0
AUDIO IN
Connect the audio output signal from video equipment connected to o or !3
to this jack. For a mono audio signal (a single audio jack), connect it to the L (MONO) jack (p.20).
!1
COMPUTER/COMPONENT AUDIO IN
Connect the audio output (stereo) signal from a computer or video equipment connected to r or y to this jack (pp.19, 21).
!2
AUDIO OUT (VARIABLE)
Connect an external audio amplifier to this jack
(pp.19–21).
This terminal outputs sound from AUDIO IN terminal
( !0
or !1
).
!3 S-VIDEO IN
Connect the S-VIDEO output signal from video equipment to this jack (p.20).
!4
SD Card Indicator
Display the status of SD card.When inserting SD
Card, the indicator lights, and when removing SD
Card, the indicator turns off.
!5
SD Card Slot
Memory viewer operation(refer to the owner’s manual of Memory viewer).
11
Part Names and Functions
Top Control
q w e r t y i o
!0
!1
u
1 q ALARM indicator
Blinks red when informing the setting or battery status (pp.58–59).
w LAMP REPLACE indicator
Lights yellow when the projection lamp reaches its end of life (pp.65, 71).
e ON/STAND–By button
Turn the projector on or off (pp.22–23).
r INPUT button
Select an input source (pp.30–31, 40–41).
t KEySTONE button
Correct keystone distortion (pp.26, 48).
y POINT ed7 8 (VOLUME +/–) buttons
– Select an item or adjust the value in the
On-Screen Menu (p.24).
– Pan the image in the Digital zoom + mode (p.39).
– Adjust the volume level (Point 7 8 buttons) (p.27).
u SELECT button
– Execute the selected item (p.24).
– Expand or compress the image in the Digital zoom mode (p.39).
i WARNING indicator
– Lights red when the projector detects an abnormal condition.
– Blinks red when the internal temperature of the projector exceeds the operating range (pp.62, 71).
o POWER indicator
– Lights red when the projector is in stand-by mode.
– Lights green during operations.
– Blinks green in the Power management mode
(p.52).
!0
AUTO SETUP/CANCEL button
–Correct vertical keystone distortion and adjust
computer display parameters such as Fine sync.,
Total dots, and Picture position (pp.26, 47).
–Display the image in SD card or return to the
menu bar in Memory Viewer menu.
Refer to the owner's manual of "Network Set-up
and Operation" and owner's manual of Memory
viewer.
!1 MENU button
Open or close the On-Screen Menu (p.24).
!1
!2
!3
!4
!5
!6
Remote Control
q y u i o
!0
t r e w
!7
@4
@3
@2
@1
@0
!9
!8
@6
@5
To ensure safe operation, please observe the following precautions:
– Do not bend, drop, or expose the remote control to moisture or heat.
– For cleaning, use a soft dry cloth. Do not apply benzene, thinner, splay, or any chemical material.
Part Names and Functions
q L-CLICK button
Act as the left mouse button for wireless mouse operation. (p.15) w POWER ON/STAND-By button
Turn the projector on or off. (pp.22-23) e
WIRED REMOTE jack
Connect the remote control cable(not supplied) to this jack when using as a wired remote control.Wireless remote control does not work when the remote control cable is connected to the projector r SIGNAL EMISSION indicator
Lights red while the laser beam is being emitted from the laser light window or a signal is being sent from the remote control to the projector.
t LASER LIGHT window
A laser beam is emitted from here (p.14).
y VIDEO button
Select the VIDEO input source. (p.40) u COMPUTER button
Select the COMPUTER input source. (pp.30-31,41) i AUTO PC button
Automatically adjust the computer image to its optimum setting. (pp.28,33,47) o
Correct keystone distortion. (pp.26, 48)
!0 Point ed 7 8 ( VOLUME + / – ) buttons
– Select an item or adjust the value in the On-Screen Menu. (p.24)
– Pan the image in the Digital zoom + mode. (p.39)
– Adjust the volume level. (Point 7 8 buttons) (p.27)
!1
MENU button
Open or close the On-Screen Menu. (p.24)
!2 FREEZE button
Freeze the picture on the screen. (p.28)
!3
LASER button
– Operate the Laser pointer function. Laser beam is emitted while pressing this button within 1 minute. When using this laser pointer for more than 1 minute, release the LASER button and press it again. (p.14)
– Display the Pointer on the screen. (p.14)
!4 PAGE ed buttons
Scroll back and forth the pages on the screen when giving a presentation. To use these buttons, connect the projector and your computer with a USB cable. (pp.11,
19)
!5
LAMP CONTROL button
Select a lamp mode. (pp.28, 53)
!6 D .ZOOM ed buttons
Zoom in and out the images. (pp.28, 39)
!7 RESET/ON/ALL-OFF switch
When using the remote control, set this switch to “ON.” Set it to “ALL OFF” for power saving when it is not used. Slide this switch to "RESET" to initialize the remote control code or switch Spotlight and Pointer to the Laser pointer function.
(pp.14-15)
!8 IMAGE button
Select the image mode. (pp.29,36,43)
!9 MUTE button
Mute the sound. (p.27)
@0 P-TIMER button
Operate the P-timer function. (p.29)
@1 NO SHOW button
Temporarily turn off the image on the screen. (p.29)
@2 R-CLICK button
Act as the right mouse button for wireless mouse operation. (p.15)
@3
SELECT button
– Execute the selected item. (p.24)
– Expand or compress the image in Digital zoom mode. (p.39)
@4 PRESENTATION POINTER button
Move a pointer of the projector or a pointer for wireless mouse operation. (pp.14-15)
@5 AUTO SET/CANCEL button
– Correct vertical keystone distortion and adjust the PC display parameters. (pp.26,
47)
– Display the image in SD card or return to the menu bar in Memory Viewer menu.
Refer to the owner's manual of "Network Set-up and Operation" and owner's
manual of Memory viewer.
@6 NETWORK button
13
Part Names and Functions
Laser Pointer Function
This remote control emits a laser beam from the laser light window. Press the LASER button to activate the laser pointer. The signal emission indicator lights red and the red laser beam is emitted. If the LASER button is pressed for more than one minute or if it is released, the laser light goes off.
The laser emitted is a Class II laser. Do not look into the laser light window or point the laser beam at yourself or other people. The following is the caution label for the laser beam.
CAUTION: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Never look directly into the laser light window while a laser is emitted, otherwise eye damage may result.
The caution label is put on the remote control.
Signal Emission Indicator
Laser Light Window
Pointer Function
You can move the Spotlight or Pointer of the projector with the remote control to emphasize a part of the projected image.
1 Press and hold the MENU and NO SHOW buttons for more than 10 seconds to activate the Pointer function.
(The Laser pointer has switched to the Pointer function.)
PRESENTATION POINTER button
Press the LASER button on the remote control pointing toward the projector. The Spotlight or Pointer is displayed on the screen with the LASER button lighting green. Then move the Spotlight or Pointer with the
PRESENTATION POINTER button. If the LASER button does not light green and continues to emit a laser beam, try the abovementioned procedure until the LASER button lights green.
MENU button
NO SHOW button
Press and hold the MENU and NO SHOW buttons for more than 10 seconds.
3 To clear the Spotlight or Pointer out the screen, press the LASER button pointing toward the projector and see if the LASER button lighting is turned off.
To switch to the Laser pointer again, press and hold the NO SHOW and MENU buttons for more than 10 seconds or slide the RESET/ON/ALL-OFF switch to
“RESET” and then to “ON”.
When you reset the Pointer function, the remote control code will be reset, as well.
Spotlight Pointer
PRESENTATION POINTER button
LASER button
After the Laser pointer has switched to the Pointer, use the LASER button as the
Pointer function ON-OFF switch. Press the LASER button pointing toward the projector and see if it lights green.
1
✔ Note:
• You can choose the size of Spotlight (Large/Middle/
Small) and the pattern of Pointer (Arrow/Finger/Dot) in the Setting Menu. See “Pointer” on page 53.
Wireless Mouse Operation
The remote control can be used as a wireless mouse for your computer.
1 Before operating the wireless mouse, connect your computer and the projector with a USB cable (not supplied). See “Connecting to a
Computer” on page 19. When the Pointer function is used, the wireless mouse is not available.
When a USB cable is connected to the computer and the projector, turn on the projector first, then the computer. If you turn on the computer first, the wireless mouse function may not operate correctly.
Part Names and Functions
PRESENTATION POINTER button
Move the pointer on the screen with this button.
R-CLICK button
Acts as right (click) mouse button while the projector and a computer are connected with a
USB cable.
L-CLICK button
Acts as left (click) mouse button while the projector and a computer are connected with a USB cable.
Remote Control Code
The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 53.
1 Press and hold the MENU and IMAGE buttons for more than five seconds to switch between the codes.
The code switches sequentially for one pressing the
IMAGE button. See the list below.
To initialize the remote control code, slide the RESET/
ON/ALL-OFF switch to “RESET,” and then to “ON.”
The initial code is set to Code 1.
While pressing the MENU button, press the IMAGE button number of times corresponding to the remote control code.
Remote Control Code
Code 1
Code
Code 3
Code
Code 5
Code 6
Code 7
Code 8
Button
1
3
5
6
7
8
MENU button
IMAGE button
RESET/ON/ALL-OFF switch
15
Part Names and Functions
Remote Control Battery Installation
1
Open the battery compartment lid.
Install new batteries into the compartment.
3
Replace the compartment lid.
Press the lid downward and slide it.
Two AAA size batteries
For correct polarity
(+ and –), be sure battery terminals are in contact with pins in compartment.
To insure safe operation, please observe the following precautions :
●
Use two (2) AAA or LR03 type alkaline batteries.
●
Always replace batteries in sets.
●
Do not use a new battery with a used battery.
●
Avoid contact with water or liquid.
●
Do not expose the remote control to moisture or heat.
●
Do not drop the remote control.
●
If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.
●
Risk of an explosion if battery is replaced by an incorrect type.
●
Dispose of used batteries according to the instructions.
Remote Control Operating Range
Point the remote control toward the projector (Infrared
Remote Receiver) when pressing the buttons. Maximum operating range for the remote control is about 16.4'(5 m) and 60 degrees in front of the projector.
30°
30°
16.4'
(5 m)
Remote control
Adjustable Feet
Projection angle can be adjusted up to 8.9 degrees with the adjustable feet.
Lift the front of the projector and pull the feet lock latches on both side of the projector upward.
Release the feet lock latches to lock the adjustable feet and rotate the adjustable feet to a proper height, and tilt.
Keystone distortion can be adjusted automatically with the
Auto setup function or manually by using the remote control or the menu operation (see pages 26, 47-48).
Adjustable Feet Feet Lock Latches
16
Installation
Positioning the Projector
For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen.
✔ Notes:
• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
A : B = 49 : 1
39.7'(12.1m)
25.2'(7.7m)
3.3'(1.0m)
16.7'(5.1m)
12.5'(3.8m)
8.2'(2.5m)
150 "
100 "
95
40 " 63
200
127
"
300 "(wide)
Max. Zoom
189
A
(Inch Diagonal)
300 "(tele )
Min. Zoom
(Center)
B
SQ@
Screen Size
(W x H) mm
16 : 10 aspect ratio
Zoom (min)
Zoom (max)
40”
862 x 538
5.2'(1.6m)
3.3'(1.0m)
100”
2154 x 1346
13.1'(4.0m)
8.2'(2.5m)
150”
3231 x 2019
19.7'(6.0m)
12.5'(3.8m)
200”
4308 x 2692
26.86(8.1m)
16.7'(5.1m)
300”
6462 x 4039
39.7'(12.1m)
25.2'(7.7m)
17
Installation
Connecting the AC Power Cord
This projector uses nominal input voltages of 100-120 V or
200–240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.
If you are not sure of the type of power being supplied, consult your authorized dealer or service station.
Connect the projector with all peripheral equipment before turning the projector on.
Connect the AC power cord (supplied) to the projector.
The AC outlet must be near this equipment and must be easily accessible.
CAUTION
For safety, unplug the AC power cord when the projector is not in use. When this projector is connected to an outlet with the AC power cord, it is in Stand-by mode and consumes a little electric power.
NOTE ON THE POWER CORD
AC power cord must meet requirement of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If supplied AC power cord does not match your AC outlet, contact your sales dealer.
Projector side
For the U .S .A . and Canada
AC outlet side
For Continental Europe For the U .K .
Ground
To power cord connector on your projector.
To the AC outlet.
(10 V AC)
To the AC outlet.
(00 - 0 V AC)
To the AC outlet.
(00 - 0 V AC)
18
Installation
Connecting to a Computer
Cables used for connection
• VGA Cable (Mini D-sub 15 pin) *
• DVI-I/VGA Cable
• DVI Cable
• USB Cable
• Audio Cables
(*One cable is supplied; other cables are not supplied with the projector.)
Audio Output USB port
Monitor
Output
Monitor
Input
Monitor
Output
Monitor
Output External Audio Equipment
Audio Input
Audio cable
(stereo)
USB cable VGA cable VGA cable DVI-I/VGA cable
DVI cable
USB
COMPUTER IN 2/
COMPONENT
MONITOR
OUT
COMPUTER IN 1
DVI-I
Audio cable
(stereo)
KB3AC
COMPUTER/
COMPONENT
AUDIO IN
✔ Notes:
• Input sound to the COMPUTER/COMPONENT AUDIO IN terminal when using the COMPUTER IN 1/DVI-I and the
COMPUTER IN 2/ COMPONENT IN terminal as input.
• When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.
• USB cable connection is needed when operating the computer with the remote control or using the PAGE ed buttons on the remote control.
SD
AUDIO OUT
(stereo)
Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.
19
Installation
Connecting to Video Equipment
Cables used for connection
• Video and Audio Cable (RCA x 3)
• S-VIDEO Cable
• Audio Cable
(Cables are not supplied with the projector. )
Composite Video and Audio Output
(R) (L) (Video)
S-video Output
Video and audio cable S-video cable
External Audio Equipment
Audio Input
AUDIO IN VIDEO S-VIDEO
Audio cable
(stereo)
KB3AC
SD
0
✔ Notes:
• When the AUDIO OUT is plugged-in, the projector's builtin speaker is not available.
• The S-VIDEO jack connection overrides the VIDEO jack connection when selecting AUTO in the Input Menu
(p.40).
AUDIO OUT
(stereo)
Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.
Installation
Connecting to Component Video Equipment
Cables used for connection
• Audio Cables
• Scart-VGA Cable
• Component Cable
• Component-VGA Cable
(Cabels are not supplied with this projector.)
RGB Scart 21pin Output
Component Video Output
(Y, Pb/Cb, Pr/Cr)
Audio Output
Component cable
Scart-VGA cable
Component-VGA cable
Audio cable
(stereo)
COMPUTER IN 2/COMPONENT IN
COMPUTER/ COMPONENT
AUDIO IN
External Audio Equipment
Audio Input
Audio cable
(stereo)
KB3AC
✔
Notes:
• When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.
• See page 77 for ordering optional cables.
• RGB Scart signal cannot be output from the MONITOR
OUT terminal.
SD
AUDIO OUT
(stereo)
Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.
1
Basic Operation
Turning On the Projector
1
3
Complete peripheral connections (with a computer,
VCR, etc.) before turning on the projector.
Connect the projector’s AC power cord into an AC outlet. The POWER indicator lights red.
Open the lens cover (see pages 10,64).
Press the POWER ON/SYAND-BY button on the top control or on the remote control. The POWER indicator lights green and the cooling fans start to operate. The preparation display appears on the screen and the count down starts.
After the countdown, the input source that was selected the last time and the lamp control status icon (see page
53) appear on the screen.
If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed below.
Enter a PIN code
Use the Point ed buttons to enter a number. Press the Point
8 button to fix the number and move the red frame pointer to the next box. The number changes to “ ✳ .” If you fixed an incorrect number, use the Point 7 button to move the pointer to the number you want to correct, and then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to “Set.”
Press the SELECT button so that you can start to operate the projector.
If you entered an incorrect PIN code, “PIN code” and the number ( ✳✳✳✳ ) will turn red for a moment. Enter the correct
PIN code all over again.
What is PIN code?
PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector.
A PIN code consists of a four-digit number. Refer to the PIN code lock function in the Setting Menu on pages 54–55 for locking operation of the projector with your PIN code.
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no longer be started. Take a special care in setting a new PIN code; write down the number in a column on page 80 of this manual and keep it at hand. Should the PIN code be missing or forgotten, consult your dealer or service center.
16
The preparation display will disappear after 30 seconds.
Selected Input Source and Lamp Control
Lamp control status
(See page 51 for Lamp control status.)
✔ Note:
• The Filter warning and Lamp replacement icons may appear on the screen depending on the usage state of the projector.
PIN Code Input Dialog Box
After the OK icon disappears, you can operate the projector.
✔ Notes:
• When the Logo select function is set to
“Off,” the logo will not be shown on the screen (p.50).
• When the “Countdown off” or “Off” is selected in the Display function, the countdown will not be shown on the screen (p.48).
• During the countdown period, all operations are invalid.
• If the correct PIN code number is not entered within three minutes after the
PIN code dialog box appeared, the projector will be turned off automatically.
• The “1234” is set as the initial PIN code at the factory.
• When the Input Search function is set to
“On2”, the input signal will be searched automatically (p.51)
Basic Operation
Turning Off the Projector
1 Press the POWER ON/STAND-BY button on the top control or on the remote control, and “Power off?” appears on the screen.
Press the POWER ON/STAND-BY button again to turn off the projector. The POWER indicator starts to blink red, and the cooling fans keep running. (You can select the level of fans’ quietness and speed. See “Fan” on page 56.) At this time, you can unplug the AC power cord even if the fans are still running.
3 When the projector has cooled down enough, the
POWER indicator stops blinking and you can turn on the projector.
TO MAINTAIN THE LIFE OF THE LAMP, ONCE
YOU TURN THE PROJECTOR ON, WAIT AT
LEAST FIVE MINUTES BEFORE TURNING IT
OFF.
DO NOT OPERATE THE PROJECTOR
CONTINUOUSLY WITHOUT REST.
CONTINUOUS USE MAY RESULT IN
SHORTENING THE LAMP LIFE. TURN OFF THE
PROJECTOR AND LET STAND FOR ABOUT AN
HOUR IN EVERY 24 HOURS.
✔ Notes:
• When the On start function is set to “On,” the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.53).
• The running speed of cooling fans is changed according to the temperature inside the projector.
• Do not put the projector in a case before the projector is cooled enough.
• If the WARNING indicator blinks or lights red, see
“Warning Indicators” on page 62.
• While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.
• The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector is turned off.
• The projector can be turned on after the POWER indicator turns red. The waiting time to restart will be shortened when the normal power-off processing for fan
cooling is completed, compared with the time the AC power cord is immediately unplugged after the poweroff.
“Power off?” disappears after 4 seconds.
3
Basic Operation
1
How to Operate the On-Screen Menu
The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer to the respective sections in this manual.
3
Press the MENU button on the top control or the remote control to display the On-Screen Menu.
Use the Point 7 8 buttons to select a Menu icon. Use the Point ed buttons to select an item in the selected menu.
Press the SELECT button to show the item data. Use the Point 7 8 buttons to adjust the values.
To close the On-Screen Menu, press the MENU button again.
✔ Note:
• The selected item is not active until the SELECT button is pressed.
Top Control
MENU button
POINT buttons
SELECT button
Remote Control
POINT buttons
SELECT button
MENU button
On-Screen Menu Menu icon
Menu bar
Pointer (red frame)
Press the Point ed buttons to move the pointer.
Item
SELECT button
Pointer
(red frame)
Quit
Exit this menu.
Item data
Press the Point 7 8 buttons to adjust the value.
Basic Operation
Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 71-72.
For computer source
Guide Window
Show the selected
Menu of the On-
Screen Menu.
PC System Menu
Used to select computer system
(p.32).
Image Select Menu
Used to select an image mode among
Dynamic, Standard, Real,
Blackboard(Green), and
Image 1–4 (p.36).
Screen Menu
Used to adjust size of the image [Normal/
True/Full/Custom/Digital zoom +/–] (pp.38–39).
Setting Menu
Used to set the projector’s operating configurations
(pp.47-57).
Wireless Menu
See owner’s manual
“Network Set-up and
Operation”.
Input Menu
Used to select an input source either
Computer or Video.
(pp.30-31).
PC Adjust Menu
Used to adjust parameters to match with input signal format
(pp.33–35).
Image Adjust Menu
Used to adjust computer image
[Contrast/Brightness/ Color temp./White balance (R/G/B)/
Sharpness/Gamma] (pp.37–38).
Sound Menu
Used to adjust the volume or mute the sound
(p.27).
Wired Menu
See owner’s manual
“Network Set-up and
Operation”.
For video source
Input Menu
Used to select an input source either Video or
Computer (pp.40, 41).
Image Select Menu
Used to select an image mode among Dynamic, Standard,
Cinema, Blackboard(Green) and
Image 1–4 (p.43).
Screen Menu
Used to set size of image[Normal/
Zoom/Natural wide/
Custom](p.46,47).
Same function as menu for computer source.
AV System Menu
Used to select system of selected video source (p.42).
Image Adjust Menu
Used to adjust picture image
[Contrast/Brightness/Color/Tint/
Color temp./White balance (R/
G/B)/Sharpness/Gamma/ Noise reduction/Progressive] (pp.44–45).
Same function as computer menu.
5
Basic Operation
Zoom and Focus Adjustment
Rotate the Zoom Ring to zoom in and out.
Rotate the Focus Lever to adjust the focus of the image.
Zoom Ring
Focus Lever
Auto Setup Function
Auto setup function is provided to automatically correct
Keystone distortion according to the projector’s tilt and adjust the computer display parameters (Fine sync, Total dots, and
Picture position) by just pressing the AUTO SETUP/CANCEL button on the top control or the AUTO SET/CANCEL button on the remote control. The operational setup for the Auto setup can be changed in the Setting menu. Refer to page 47 for the setting of the Auto setup function.
✔ Notes:
• Auto Keystone corrects vertical distortion only; it does not correct horizontal distortion.
• Auto Keystone cannot work when Ceiling feature is set to
“On” in the Setting menu (p.51).
• Perfect correction of the image distortion cannot be ensured with the Auto setup function. If the distortion cannot be corrected properly by pressing the AUTO
SETUP/CANCEL or AUTO SET/CANCEL button, adjust manually by pressing the KEYSTONE button on the remote control or selecting Keystone in the Setting menu
(p.48).
• Fine sync, Total dots, Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto
PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.34–35).
Keystone Correction
If a projected picture still has keystone distortion after pressing the AUTO SETUP/CANCEL button on the top control or the AUTO SET/CANCEL button on the remote control, correct the image manually as follows:
Press the KEYSTONE button on the remote control. The
Keystone dialog box appears. Use the Point ed buttons to correct keystone distortion. The keystone adjustment can be stored (see page 48).
Reduce the upper width with the Point e button.
Reduce the lower width with the Point d button.
Top Control
Remote Control
AUTO SETUP/CANCEL button
POINT ed buttons
KEySTONE button
AUTO SET/CANCEL button
POINT ed buttons
• The white arrows indicate that there is no correction.
• A red arrow indicates the direction of correction.
• An arrow disappears at the maximum correction.
• If you press the KEYSTONE button on the remote control once more while the keystone dialog box is being displayed, the keystone adjustment will be canceled.
• The adjustable range is limited depending on the input signal.
6
Basic Operation
Sound Adjustment
Direct Operation
Volume
Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds.
Mute
Press the MUTE button on the remote control to temporarily turn off the sound. To turn the sound back on, press the
MUTE button again or press the VOLUME +/– buttons. The
Mute function is also effective for the AUDIO OUT jack.
Top Control
Remote Control
VOLUME+/- buttons
VOL- button
VOL+ button
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red frame pointer to the Sound Menu icon.
Use the Point ed buttons to move the red frame pointer to the desired item, and then press the SELECT button.
Volume Dialog Box
MUTE button
Approximate level of the volume.
Volume
Press the Point 8 button to turn up the volume; press the
Point 7 button to turn down the volume.
Mute
Press the Point 7 8 buttons to switch the mute function On/
Off. When the sound is turned off, “On” is displayed. Press the Point 7 8 buttons again to turn the sound back on.
Press the MUTE button to set the Mute function On or Off. The dialog box disappears after 4 seconds.
Sound Menu
Sound Menu icon
Approximate level of the volume.
Exit the Sound Menu.
7
Basic Operation
Remote Control Operation
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu.
COMPUTER/VIDEO/NETWORK button
Press the COMPUTER, VIDEO, or NETWORK button on the remote control to select the input source. See pages 30-
31, 40-41 for details.
Refer to the owner’s manual “Network Set-up and
Operation” for details about the network input.
FREEZE button
Press the FREEZE button on the remote control to freeze the picture on the screen. To cancel the Freeze function, press the FREEZE button again or press any other button.
Remote Control
COMPUTER button
AUTO PC button
VIDEO button
NETWORK button
POINT ed buttons
FREEZE button
AUTO PC button
Press the AUTO PC button on the remote control to operate the Auto PC Adj. function. The computer screen adjustment can be done easily by pressing this button. See page 33 for details.
D .ZOOM buttons
LAMP
CONTROL button
NO SHOW button
P-TIMER button
IMAGE button
D .ZOOM buttons
Press the D.ZOOM buttons on the remote control to enter to the Digital zoom +/– mode. See page 39 for details.
✔ Note:
• See the next page for the description of other buttons.
LAMP CONTROL button
Press the LAMP CONTROL button on the remote control to select the lamp mode for changing the brightness on the screen.
Auto ........... The brightness according to the input signal
(between High and Eco mode).
High ........... Brighter than the Normal mode.
Normal ....... Normal brightness
Eco ............ Lower brightness reduces the lamp power consumption and extends the lamp life.
8
Basic Operation
NO SHOW button
Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as “User” in the Logo selection (see page 49), the screen changes each time you press the NO SHOW button as follows.
black out ➜ the captured image ➜ normal ➜
• • • • •
P-TIMER button
Press the P-TIMER button on the remote control. The P-Timer display “00:00” appears on the screen and the countdown starts (00:00–59:59).
To stop the countdown, press the P-TIMER button. To cancel the P-Timer function, press the P-TIMER button again.
IMAGE button
Press the IMAGE button on the remote control to select a desired image mode of the screen. See pages 3 6 , 43 for details.
“No show” disappears after 4 seconds.
P-Timer display
NO SHOW button
P-TIMER button
IMAGE button
✔ Note:
• See the previous page for the description of other buttons.
9
Computer Input
Input Source Selection (RGB: Computer 1 (Analog)/Computer )
Direct Operation
Choose either Computer 1 (Analog) or Computer 2 by pressing the INPUT button on the top control or press the
COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described below.
Top Control
INPUT button
Computer 1 (Analog)
Computer 1 (Digital)
Computer
Video
Wired
Wireless
Remote Control
COMPUTER button
Computer 1 (Analog)
Computer 1 (Digital)
Computer
Input Menu icon
Input Menu
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red frame pointer to the Input Menu icon.
Use the Point ed buttons to move the red arrow pointer to either Computer 1 (Analog) or Computer 2, and then press the SELECT button.
3 When selecting Computer 1 (Analog), RGB input source will be selected directly.
When selecting Computer 2, the Source Select Menu appears. Move the pointer to RGB and then press the
SELECT button.
Input Menu
Move the pointer (red arrow) to Computer 1
(Analog) and press the
SELECT button.
Input Menu icon
✔
Notes:
• Wired and Wireless are for the Network function. See owner’s manual “Network Set-up and Operation” .
• When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.51).
Move the pointer (red arrow) to Computer 2 and press the SELECT button.
Computer
Move the pointer
(red arrow) to RGB.
30
Computer Input
Input Source Selection (RGB(PC digital), RGB(AV HDCP))
Direct Operation
Choose Computer 1(Digital) by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described below.
Menu Operation
1
3
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red frame pointer to the Input Menu icon.
Use the Point ed buttons to move the red arrow pointer to Computer 1 (Digital), and then press the
SELECT button.
After the Source Select Menu appeared for Computer
1 (Digital), move the pointer to RGB (PC digital) or
RGB (AV HDCP), and then press the SELECT button.
Top Control INPUT button
Computer 1 (Analog)
Computer 1 (Digital)
Computer
Video
Wired
Wireless
Remote Control
COMPUTER button
Computer 1 (Analog)
Computer 1 (Digital)
Computer
Input Menu icon
Input Menu
Move the pointer
(red arrow) to
Computer 1
(Digital) and press the SELECT button.
✔
Notes:
• HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.
• Wired and Wireless are for the Network function. See owner’s manual “Network Set-up and Operation” .
• When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.51).
Computer
1
Move the pointer to the source that you want to select and press the SELECT button.
31
Computer Input
Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 74-75.)
One of the following messages may appear when:
Auto
-----
Mode 1
SVGA 1
The projector cannot recognize the connected signal conforming to the provided PC Systems.
The “Auto” is displayed on the System Menu box and the Auto PC Adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required (pp.34-35).
There is no signal input from the computer.
Check the connection between your computer and the projector. (See “Troubleshooting” on page 67.)
The preset system is manually adjusted in the
PC Adjust Menu. The adjusted data can be stored in Mode 1–5 (pp.34-35).
PC Systems provided in this projector is chosen.
The projector chooses a proper system provided in the projector and displays it.
*Mode 1 and SVGA 1 are examples.
PC System Menu
The Auto PC Adjustment function operates to adjust the projector.
Selecting Computer System Manually
PC system can also be selected manually.
1 Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red frame pointer to the PC System Menu icon.
Use the Point ed buttons to move the red arrow pointer to the desired system and then press the
SELECT button.
PC System Menu
The PC System Menu icon
Selected system is
displayed.
Systems in this dialog box can be selected.
Customized Mode (1–5) set in the PC Adjust Menu (pp.34–35).
3
Computer Input
Auto PC Adjustment
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer.
Direct Operation
The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control.
Remote Control
AUTO PC button
Menu Operation
Auto PC Adj .
1 Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red frame pointer to the PC Adjust Menu icon.
Use the Point ed buttons to move the red frame pointer to Auto PC Adj. and then press the SELECT button twice.
To store adjustment parameters
The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode (1–5) in the
PC System Menu (see page 32). See also “Store” on page
35.
✔ Notes:
• Fine sync, Total dots, Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto
PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.34–35).
• The Auto PC Adjustment cannot be operated when 480i,
575i, 480p, 575p, 720p,1035i, or 1080i is selected in the
PC System Menu (p.32), or when the signal is coming from the DVI-terminal.
PC Adjust Menu
PC Adjust Menu icon
Move the red frame pointer to Auto PC Adj. and press the SELECT button.
“Please wait...” appears while the Auto PC adjustment is in process.
33
Computer Input
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.
Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.
PC Adjust Menu 1 Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red frame pointer to the PC Adjust Menu icon.
Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Use the
Point 7 8 buttons to adjust the setting value.
PC Adjust Menu icon
Move the red frame pointer to the desired item and press the SELECT button.
Fine sync
Use the Point 7 8 buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31).
Status (Stored/Free) of the selected Mode.
Selected Mode
Total dots
Use the Point 7 8 buttons to adjust the number of total dots in one horizontal period to match your PC image.
Use the Point 7 8 buttons to adjust the value.
Horizontal
Use the Point 7 8 buttons to adjust the horizontal picture position.
Vertical
Use the Point 7 8 buttons to adjust the vertical picture position.
Press the SELECT button here to adjust other items.
Current mode
Press the SELECT button to show H-sync freq. and V-sync freq. of the connected computer.
Clamp
Use the Point 7 8 buttons to adjust the clamp level. When the image has dark bars, try this adjustment.
Press the SELECT button at
Current mode to show the information of the connected computer.
3
Computer Input
Display area H
Use the Point 7 8 buttons to adjust the horizontal area displayed by this projector.
Display area V
Use the Point 7 8 buttons to adjust the vertical area displayed by this projector.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
Mode free
To clear the stored data, select Mode free and then press the SELECT button. Move the red arrow pointer to the Mode that you want to clear and then press the SELECT button.
Move the red frame pointer to the desired item and press the SELECT button.
To clear adjusted data
This Mode has stored parameters.
Store
To store the adjusted data, select Store and then press the
SELECT button. Move the red arrow pointer to one of the
Modes 1 to 5 in which you want to store, and then press the
SELECT button.
Quit
Exit the PC Adjust Menu.
Vacant
Values of “Total dots”,
“Horizontal”, “Vertical”,
“Display area H”, and
“Display area V”.
To store adjusted data
Close this dialog box.
✔ Notes:
• Display area (H/V) cannot be selected when 480i, 575i,
480p, 575p, 720p, 1035i, or 1080i is selected in the PC
System Menu (p.32).
• PC Adjust Menu cannot be selected when Computer
1(Digital) is selected in the Input Menu (p.31).
35
Computer Input
Image Mode Selection
Direct Operation
Select the desired image mode from among Dynamic,
Standard, Real, Blackboard (Green), Image 1, Image 2,
Image 3, and Image 4 by pressing the IMAGE button on the remote control.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Real
Picture mode with improved halftone for graphics.
Blackboard (Green)
For the image projected on a blackboard.
This mode help enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board.
Image 1–
For viewing with the user preset image mode in the Image
Adjust Menu (see pages 37-38). This Image memory is provided in each computer, component, and video input source.
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon.
Use the Point ed buttons to move the red frame pointer to the desired image mode and then press the
SELECT button.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Real
Picture mode with improved halftone for graphics.
Blackboard(Green)
For the image projected on a blackboard. See above for further description.
36
Image 1~
For viewing with the user preset image mode in the Image
Adjust Menu (see pages 37-38).
Remote Control
IMAGE button
IMAGE button
Dynamic
Standard
Real
Blackboard(Green)
Image 1
Image
Image 3
Image
Image Select Menu
Image Select Menu icon
Move the red frame pointer to the desired image mode and press the SELECT button.
The selected image mode is check marked.
Computer Input
Image Adjustment
1 Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon.
Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Use the
Point 7 8 buttons to adjust the setting value.
Contrast
Press the Point 7 button to decrease the contrast; press the
Point 8 button to increase the contrast (from 0 to 63).
Brightness
Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63).
Color temp .
Use the Point 7 8 buttons to select the desired Color temp. level (High, Mid, Low, or XLow).
White balance (Red)
Press the Point 7 button to lighten red tone; press the Point
8 button to deepen red tone (from 0 to 63).
White balance (Green)
Press the Point 7 button to lighten green tone; press the
Point 8 button to deepen green tone (from 0 to 63).
White balance (Blue)
Press the Point 7 button to lighten blue tone; press the
Point 8 button to deepen blue tone (from 0 to 63).
Sharpness
Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15).
Gamma
Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
Image Adjust Menu
Image Adjust Menu icon
Move the red frame pointer to the desired item and then press the SELECT button.
Selected Image mode
Use the Point 7 8 buttons to adjust the setting value.
✔ Note:
• When the White balance Red, Green, or
Blue is adjusted, the Color temp. level will change to “Adj.”.
37
Computer Input
38
Store
To store the adjusted data, select Store and press the
SELECT button. Use the Point ed buttons to select one from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select [Yes]. Stored data can be called up by selecting an “Image (1–4)” in the
Image Mode Selection on page 36.
Quit
Exit the Image Adjust Menu.
Image Mode Menu
Move the red frame pointer to an image item to be set and then press the
SELECT button.
Store icon
A confirmation box appears and then select
[Yes]
Screen Size Adjustment
This projector has the picture screen resize function, which enables you to customize the image size.
1 Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon.
Use the Point ed buttons to move the red frame pointer to the desired function and then press the
SELECT button.
Normal
Provide the image to fit the screen size.
True
Provide the image in its original size. When the original image size is larger than the screen size (1280 x 800), the projector enters to the panning mode automatically. Use the
Point ed7 8 buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear.
Full
Provide the full screen image.
Screen Menu
Screen Menu icon
Move the red frame pointer to the function and press the
SELECT button.
✔ Notes:
• This Screen Menu cannot be operated when 720p(HDTV), 1035i (HDTV), or
1080i (HDTV) is selected in the PC
System Menu (p.32).
• This projector cannot display any resolution higher than 1600 x 1200. If your computer’s screen resolution is higher than it, reset the resolution to the lower before connecting to the projector.
• The image data in other than 1280 x 800 is modified to fit the screen size in initial mode.
• True, Full screen, and Digital zoom
+/– cannot be selected when 480i, 575i,
480p, or 575p is selected in the PC
System Menu (p.32).
Computer Input
Custom
Adjust the screen scale and position manually with this function.
Press the SELECT button at Custom and the “Custom” is displayed on the screen for a few seconds and then the
Aspect dialog box appears.
Scale H/V .......... Adjust the Horizontal/Vertical screen scale.
H&V ................... When set to “On,” the aspect ratio is fixed. The “Scale V” appears dimmed and becomes unavailable. Adjust “Scale
H,” then the screen scale is automatically modified based on the aspect ratio.
Position H/V ....... Adjust the Horizontal/Vertical screen position.
Common ............ Save the adjusted scale to all the inputs.
Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at “Yes.”
When Custom is selected, the saved scale is used.
Reset ................. Reset the all adjusted values. Press the SELECT button at Reset to display a confirmation box. To reset, press the
SELECT button at “Yes.”
For zooming in and out the images
Digital zoom +
Select Digital zoom +. The On-Screen Menu disappears and
“D. zoom +” appears. Press the SELECT button to expand the image size. Use the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM e button on the remote control.
Digital zoom –
Select Digital zoom –. The On-Screen Menu disappears and
“D. zoom –” appears. Press the SELECT button to compress image size.
The projected image can be also compressed by pressing the
D.ZOOM d button on the remote control.
To exit the Digital zoom +/– mode, press any button except the D.ZOOM ed buttons, SELECT, and Point buttons.
To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see pages
30-31) again, or adjust the screen size with the D.ZOOM ed buttons.
Press the SELECT button at
Common or Reset, to display a confirmation box.
✔ Notes:
• When no signal is detected, “Normal” is set automatically and the Aspect dialog box disappears.
• The adjustable range for Scale H/V and Position H/V is limited depending on the input signal.
Remote Control
POINT buttons
SELECT button
D .ZOOM + button
D .ZOOM - button
✔ Notes:
• The panning function may not operate properly if the stored Mode in the PC
Adjust Menu is used (p.35).
• Minimum compression ratio can be limited depending on the input signal or when the Keystone function is working.
• True, Full screen, and Digital zoom
+/– cannot be selected when 480i, 575i,
480p, or 575p is selected in the PC
System Menu (p.32).
• Digital zoom +/- cannot be selected when
Full screen or True is selected.
39
Video Input
Input Source Selection (Video, S-video)
Direct Operation
Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control.
Before using these buttons, correct input source should be selected through menu operation as described below.
Top Control INPUT button
INPUT button
Computer 1 (Analog)
Computer 1 (Digital)
Computer
Video
Wired
Wireless
Remote Control
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red frame pointer to the Input Menu icon.
Use the Point ed buttons to move the red arrow pointer to Video and then press the SELECT button to display the Source Select Menu.
3 Move the pointer to the desired source and then press the SELECT button.
Auto
Video
S-video
When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order:
1. S-video
2. Video
When video input signal is connected to the
VIDEO jack, select Video.
When video input signal is connected to the S-
VIDEO jack, select S-video.
✔
Notes:
• Wired and Wireless are for the Network function. See the owner’s manual “Network Set-up and Operation” .
• When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.51).
Input Menu
VIDEO
VIDEO button
Input Menu icon
Move the pointer to
Video and press the
SELECT button.
Source Select Menu (VIDEO)
Move the pointer to the source that you want to select and press the SELECT button.
0
Video Input
Input Source Selection (Component, RGB Scart 1-pin)
Direct Operation
Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described below.
Menu Operation
1
3
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red frame pointer to the Input Menu icon.
Use the Point ed buttons to move the red arrow pointer to Computer 2 and then press the SELECT button.
After the Source Select Menu appeared for Computer
2, move the pointer to Component or RGB(Scart) and then press the SELECT button.
Top Control INPUT button
Computer 1 (Analog)
Computer 1 (Digital)
Computer
Video
Wired
Wireless
Remote Control
Input Menu
COMPUTER button
Computer 1 (Analog)
Computer 1 (Digital)
Computer
Input Menu icon
Component When the input source is coming from video equipment connected to the COMPUTER
IN 2/COMPONENT IN terminal with a
Component-VGA Cable, select Component.
Move the pointer (red arrow) to Computer 2 and press the SELECT button.
RGB (Scart) When the input source is coming from video equipment connected to the COMPUTER
IN 2/COMPONENT IN terminal with a Scart-
VGA Cable, select RGB (Scart).
Computer
Source Select Menu
Move the pointer to
Component or RGB(Scart) and press the SELECT button.
✔ Note: owner’s manual “Network Set-up and Operation” .
• When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.51).
1
Video Input
Video System Selection
1 Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red frame pointer to the AV System Menu icon.
Use the Point ed buttons to move the red arrow pointer to the desired system and then press the
SELECT button.
Video or S-Video
Auto
The projector automatically detects an incoming video system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system manually.
PAL/SECAM/NTSC/NTSC .3/PAL-M/PAL-N
If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
AV System Menu (Video or S-Video)
AV System Menu icon
The selected system is
displayed.
Move the pointer to the desired system and press the SELECT button.
Component
Auto
The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i,
575i, 480p, 575p, 720p, 1035i, and 1080i.
AV System Menu (Component)
AV System Menu icon
The selected system is
displayed.
Move the pointer to the desired system and press the SELECT button.
✔ Note:
• The AV System Menu cannot be selected when selecting RGB (Scart).
Video Input
Image Mode Selection
Direct Operation
Select the desired image mode from among Dynamic,
Standard, Cinema, Blackboard (Green), Image 1, Image 2,
Image 3, and Image 4 by pressing the IMAGE button on the remote control.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Cinema
Picture mode adjusted with fine tone.
Blackboard (Green)
For the image projected on a blackboard.
This mode help enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board.
Image 1–
For viewing with the user preset image mode in the Image
Adjust Menu (see pages 44–45). This Image memory is provided in each computer, component, and video input source.
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon.
Use the Point ed buttons to move the red frame pointer to the desired image mode and then press the
SELECT button.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Cinema
Picture mode adjusted with fine tone.
Blackboard(Green)
For the image projected on a blackboard. See above for further description.
Image1–
For viewing with the user preset image mode in the Image
Adjust Menu (see pages 44–45).
Remote Control
IMAGE button
IMAGE button
Dynamic
Standard
Cinema
Blackboard (Green)
Image 1
Image
Image 3
Image
Image Select Menu Image Select Menu icon
Move the red frame pointer to the desired image mode and press the SELECT button.
The selected image mode is check marked.
3
Video Input
Image Adjustment
1 Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon.
Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Use the
Point 7 8 buttons to adjust the setting value.
Contrast
Press the Point 7 button to decrease the contrast; press the
Point 8 button to increase the contrast (from 0 to 63).
Brightness
Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63).
Color
Press the Point 7 button decrease the intensity of the color; press the Point 8 button increase the intensity of the color
(from 0 to 63).
Tint
Press the Point 7 8 buttons to adjust the tint value to get a proper color balance (from 0 to 63).
Color temp .
Use the Point 7 8 buttons to select the desired Color temp. level (High, Mid, Low, or XLow).
White balance (Red)
Press the Point 7 button to lighten red tone; press the Point
8 button to deepen red tone (from 0 to 63).
White balance (Green)
Press the Point 7 button to lighten green tone; press the
Point 8 button to deepen green tone (from 0 to 63).
White balance (Blue)
Press the Point 7 button to lighten blue tone; press the
Point 8 button to deepen blue tone (from 0 to 63).
✔ Notes:
• When the White balance Red, Green, or Blue is adjusted, the Color temp. level will change to “Adj.”.
• Tint cannot be selected when the video system is PAL,
SECAM, PAL-M, or PAL-N (p.42).
Image Adjust Menu
Image Adjust Menu icon
Move the red frame pointer to the desired item and then press the SELECT button.
Use the Point 7 8 buttons to adjust the setting value.
Press the SELECT button at this item to display other items.
Press the SELECT button here to display the previous items.
Video Input
Sharpness
Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15).
Gamma
Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).
Noise reduction
Noise interference on the screen can be reduced. Select one of the following options to get smoother images.
Off .......... Disabled.
L1 .......... Lower reduction
L2 .......... Higher reduction
Progressive
An interlaced video signal can be displayed in progressive mode. Select one of the following options.
Off .......... Disabled.
L1 .......... For an active picture.
L2 .......... For a still picture.
Film ........ For watching a film. With this function, the projector reproduces pictures faithful to the original film quality.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
Store
To store the adjusted data, select Store and press the
SELECT button. Use the Point ed buttons to select one from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select [Yes]. Stored data can be called up by selecting an “Image (1–4)” in the
Image Select Menu on page 43.
Quit
Exit the Image Adjust Menu.
✔ Notes:
• Noise reduction and Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected
(p.42).
• Reset and Store icons will be displayed when any adjustment is made.
Store icon
Image Mode Menu
Move the red frame pointer to an image item to be set and then press the
SELECT button.
A confirmation box appears and then select [Yes].
5
Video Input
Screen Size Adjustment
This projector has the picture screen resize function, which enables you to customize the image size.
1 Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon.
Screen Menu
Use the Point ed buttons to move the red frame pointer to the desired function and then press the
SELECT button.
N W
Screen Menu icon
Normal
Provide the image at the 4:3 normal video aspect ratio.
Move the red frame pointer to the desired function and press the
SELECT button.
Zoom
Pan the horizontal direction of the image and cut the vertical direction of the image to fit the screen size (16:9).Only for
4:3 video aspect ratio signals.
N W
Natural wide
Modify the 4:3 aspect ratio image to fit the screen size(16:9 aspect ratio) by stretching the image to make it look natural.
✔ Note:
• Screen Menu cannot be operated when 720p, 1035i, or
1080i is selected in the AV System Menu (p42).
Custom
Adjust the screen scale and position manually with this function.
Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds and then the
Aspect dialog box appears.
Scale H/V .......... Adjust the Horizontal/Vertical screen scale.
H&V ................... When set to "On", the aspect ratio is fixed. The "Scale V" appears dimmed and becomes unavailable. Adjust the
"Scale H", then the screen scale is automatically modified based on the aspect ratio.
Position H/V.........Adjust the Horizontal/Vertical screen position.
Common ............ Save the adjusted scale to all the inputs.
Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at "Yes",
When Custom is selected, the saved scale is used.
Reset ................. Reset the all adjusted values. Press the SELECT button at Reset to display a confirmation box. To reset, press the
SELECT button at "Yes".
Press the SELECT button at
Common or Reset, to display a confirmation box.
✔ Notes:
• When no signal is detected, "Normal" is set automatically and the Aspect dialog box disappears.
• The adjustable range for Scale H/V and
Position H/V is limited depending on the input signal.
• "Wide" cannot be operated when 720p,
1035i, or 1080i is selected in the AV
System Menu (p.42).
6
Setting
Setting
This projector has a Setting menu that allows you to set up the other various functions described below.
1 Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon.
Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button. The Setting dialog box appears.
Language
The language used in the On-Screen Menu is available in
English, German, French, Italian, Spanish, Portuguese,
Dutch, Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean, and Japanese.
Auto setup
This function enables Auto Keystone correction and Auto PC adjustment by pressing the AUTO SETUP/CANCEL button on the top control or the AUTO SET/CANCEL button on the remote control. Settings for those functions can be altered as follows:
Auto PC Adj .
On. . . . . . .Enables Auto PC Adjustment when pressing the AUTO SET/CANCEL button on the remote control or the AUTO SETUP/CANCEL button on the top control.
Off. . . . . . .Disables Auto PC Adjustment.
Auto Keystone
Auto . . . . . Always works and corrects keystone distortion according to the projector's tilt.
Manual . . .Works only when pressing the AUTO SET/
CANCEL button on the remote control or the
AUTO SETUP/CANCEL button on the top control.
Off. . . . . . .Disables Auto Keystone.
✔ Notes:
• Auto PC Adj. and Auto Keystone cannot be set "Off" at the same time.
• Auto Keystone corrects vertical distortion only, not correct horizontal distortion.
• The Auto Keystone cannot work when Ceiling feature is set
"On" in the Setting menu (p.51).
• Perfect correction of the image distortion cannot be ensured with the Auto setup function. If the distortion is not corrected properly by pressing the AUTO SETUP/CANCEL or AUTO
SET/CANCEL button, adjust manually by pressing the
KEYSTONE button on the remote control or selecting
Keystone in the Setting menu (pp.26, 48).
• Fine sync, Total dots, Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto PC
Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.34–
35).
Setting Menu (Language)
Set the red frame pointer to the item and press the
SELECT button.
Setting Menu icon
Press the SELECT button at Language, then the
Language Menu appears.
Auto setup
Press the SELECT button here to display the other languages.
Select Auto setup and this box appears. Choose the desired setting for Auto keystone and Auto PC adj. with the Point 7 8 buttons.
7
Setting
Keystone
This function is used to store or reset the keystone correction when the AC power cord is unplugged. Use the
Point 7 8 buttons to switch between each option.
Store ........ Keep the keystone correction even when the
AC power cord is unplugged.
Reset ....... Release the keystone correction when the AC power cord is unplugged.
To correct keystone distortion, press the SELECT button.
The “Keystone” appears on the screen. Use the Point ed buttons to correct keystone distortion (p.26).
Blue back
When this function is “On,” a blue image is displayed while the input signal is not detected.
Display
This function decides whether to display On-Screen
Displays.
On ............................ Show all the On-Screen displays.
Use this function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option.
Countdown Off ......... Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough.
Off ............................ Hide the On-Screen Displays except;
●
●
●
On-Screen Menu
“Power off?” (p.23)
“No signal” for Power management
(p.52)
●
“Please wait ...”
●
Arrows for the True function
in the Screen Menu (p.38)
Keystone
Use the Point 7 8 buttons to switch between the options.
8
Setting
Logo (Logo and Logo PIN code lock settings)
This function allows you to customize the screen logo with
Logo select, Capture, and Logo PIN code lock functions.
✔ Note:
• When “On” is selected in the Logo PIN code lock function, Logo select and Capture functions cannot be selected.
Logo select
This function decides on the starting-up display from among following options.
User ......... Show the image you captured
Default ..... Show the factory-set logo
Off ............ Show the countdown display only
Capture
This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations.
Select Capture and press the SELECT button.
A confirmation box appears and select [Yes] to capture the projected image.
After capturing the projected image, go to the Logo select function and set it to “User”. Then the captured image will be displayed the next time you turn on the projector or when you press the NO SHOW button (see page 29).
To cancel the Capture function, select [No].
✔ Notes:
• Before capturing an image, select “Standard” in the Image Select Menu to capture a proper image
(pp.36, 43).
• A signal from a computer can be captured up to XGA
(1024 x 768). A signal from video equipment can be captured except for 720p, 1035i, and 1080i.
• When capturing the image that has been adjusted by the Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone correction.
• When the Logo PIN code lock function is set to “On,” the Capture function cannot be selected.
• When starting to capture a new image, the previously stored image is cleared even if you cancel the capturing.
• When there is no captured image or it is interrupted while capturing a image, the Capture function cannot be selected, you can only switch between Default and Off.
Logo select
Capture
Select [Yes] to capture the projected image.
Select [Yes] to stop capturing.
9
Setting
50
Logo PIN code lock
This function prevents an unauthorized person from changing the screen logo.
Off ............ The screen logo can be changed freely from the Logo Menu (p.49).
On ............ The screen logo cannot be changed without a Logo PIN code.
If you want to change the Logo PIN code lock setting, press the SELECT button and the Logo PIN code dialog box appears. Enter a Logo PIN code by following the steps below. The initial Logo PIN code is set to “4321” at the factory.
Enter a Logo PIN code
Use the Point ed buttons to enter a number. Press the
Point 8 button to fix the number and move the red frame pointer to the next box. The number changes to “ ✳ .” If you fixed an incorrect number, use the Point 7 button to move the pointer to the number you want to correct, and then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to
“Set.” Press the SELECT button so that you can start to operate the projector.
If you entered an incorrect Logo PIN code, “Logo PIN code” and the number ( ✳✳✳✳ ) will turn red for a moment.
Enter the correct Logo PIN code all over again.
Change the Logo PIN code lock setting
Use the Point 7 8 buttons to switch On/Off, and then press the Point d button to move the pointer to “Quit.”
Press the SELECT button to close the dialog box.
Change the Logo PIN code
Logo PIN code can be changed to your desired four-digit number. Press the Point d button to select “Logo PIN code change” and then press the SELECT button. The
New Logo PIN code input dialog box appears. Set a new
Logo PIN code.
Be sure to note the new Logo PIN code and keep it at hand. If you lost the number, you could no longer change the Logo PIN code setting. For details on PIN code setting, refer to “PIN code lock” on pages 54–55.
Logo PIN code lock
Enter a Logo PIN code
After a correct Logo PIN code is entered, the following dialog box appears.
Change the Logo PIN code lock setting
Use the Point 7 8 buttons to switch On/Off.
Change the Logo PIN code
CAUTION:
WHEN yOU HAVE CHANGED THE LOGO PIN
CODE, WRITE DOWN THE NEW PIN CODE
IN COLUMN OF THE LOGO PIN CODE NO .
MEMO ON PAGE 80, AND KEEP IT SECURELy .
SHOULD THE LOGO PIN CODE BE LOST OR
FORGOTTEN, THE LOGO PIN CODE SETTING
CAN NO LONGER BE CHANGED .
Setting
Ceiling
When this function is set to “On,” the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.
Rear
When this function is set to “On,” the picture will be left/right reversed. This function is used to project the image from rear of the screen.
Input search
This function detects the input signal automatically. When a signal is found, the search will stop. Use the Point 7 8 buttons to select one of the following options.
Off .......... Input search will not work.
On1 ........ Input search works under the following situation.
– When pressing the INPUT button on the top control.
– When pressing the COMPUTER button or
VIDEO button on the remote control.
On2 ........ Input search works under the following situation.
– When turning on the projector by pressing the
POWER ON/STAND-BY button on the top control or the remote control.
– When pressing the COMPUTER button or
VIDEO button on the remote control.
– When pressing the INPUT button on the top control.
– When the current input signal is cut off.*
Ceiling
Rear
*If the No show or Freeze function is active, cancel it to activate the Input search. It is also unavailable when On-
Screen menu is displayed.
✔ Notes:
• While Input search is set to “On1” or “On2,” the status of Input and Lamp are displayed every time the signal is switched.
• Only the last selected input source can be detected.
• If the INPUT button on the top control or COMPUTER or VIDEO buttons on the remote control is pressed during Input search is in progress, Input search will stop and go back to the previous input signal.
51
Setting
Standby mode
This function is available when operating the projector via network.
Normal ....... Supply the power to the network function even after turning off the projector. You can turn on/ off the projector via network, modify network environment, and receive an e-mail about projector status while the projector is powered off.
Eco ............ Select “Eco” when you do not use the projector via network. The projector’s network function will stop when turning off the projector.
Refer to the owner’s manual “Network Set-up and
Operation”.
✔ Note:
• When selecting Normal, the cooling fans may be running depending on the temperature inside the projector even if the projector is turned off.
Power management
For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period.
If the input signal is interrupted and no button is pressed for more than 30 seconds, the timer display with “No signal” appears. It starts the countdown until the lamp is turned off.
Use the Point 7 8 buttons to set the countdown timer.
Select one of the following options:
Ready .................. When the lamp has been fully cooled down, the POWER indicator changes to green blinking. In this condition, the projection lamp will be turned on if the input signal is reconnected or any button on the top control or remote control is pressed.
Shut down............ When the lamp has been fully cooled down, the power will be turned off.
Off ........................ Power management function is off.
✔ Note:
• Factory default is "Ready: 5 min.".
Power management
Time left before Lamp is off.
Press the SELECT button at
Power management and this dialog box appears. Use the
Point 7 8 buttons to choose one of the three options.
Press the Point d button to select the timer, and then use the Point 7 8 buttons to set timer.
5
Setting
On start
When this function is set to “On,” the projector will be automatically turned on just by connecting the AC power cord to a wall outlet.
✔ Note:
• Be sure to turn off the projector properly (see “Turning
Off the Projector” on page 23). If the projector is turned off in the incorrect sequence, the On start function does not work properly.
Lamp control
This function allows you to change brightness of the screen.
Auto ........... The brightness according to the input signal
(between High and Eco mode).
High ........... Brighter than the Normal mode.
Normal ....... Normal brightness
Eco ............ Lower brightness reduces the lamp power consumption and extends the lamp life.
Pointer
You can emphasize a part of the projected image with this function. Use the Point ed buttons to choose either
Spotlight or Pointer and press the SELECT button. Then use the Point 7 8 buttons to select a size of the Spotlight
(Large, Middle, or Small) or a pattern of the Pointer (Arrow,
Finger, or Dot). See “Pointer Function” on page 14.
Remote control
The eight different remote control codes (Code 1–Code 8) are assigned to the projector; the factory-set, initial code
(Code 1) and the other seven codes (Code 2 to Code 8).
The same code should set on both the projector and the remote control. For example, operating the projector in
“Code 7”, the remote control code also must be switched to
“Code 7”.
To change the code for the projector
Select a remote control code in this Setting Menu.
To change the code for the remote control:
While holding down the MENU button, press the IMAGE button the number of times corresponding to the remote control code for the projector. See “Remote Control Code” on page 15.
Pointer
Remote control
Use the Point ed buttons to choose either Spotlight or Pointer, and then use the Point 7 8 buttons to switch between the options.
53
Setting
Security (Key lock and PIN code lock, Alarm settings)
This function allows you to use the Key lock and PIN code lock function to set the security for the projector operation.
Key lock
Key lock
This function locks the top control and remote control buttons to prevent operation by unauthorized persons.
..... Unlocked.
..... Lock the operation of the top control. To unlock, use the remote control.
..... lock the operation of the remote control.
To unlock, use the top control.
If the top control accidentally becomes locked and you do not have the remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center.
Select Key lock. Use the Point ed buttons to choose one of the options and select
[Yes] to activate it.
5
PIN code lock
This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security.
Off ............ Unlocked.
On1 .......... Enter the PIN code every time turning on the projector.
On2 .......... Enter the PIN code to operate the projector once the power cord is disconnected; as long as the AC power cord is connected, the projector can be operated without a
PIN code.
Whenever you change the PIN code lock setting or the
PIN code (the four-digit number), you are required to enter the PIN code. The “1234” is set as the initial PIN code at the factory.
If you want to change the PIN code lock setting, Press the SELECT button and the PIN code dialog box appears.
PIN code lock
When the projector is locked with a PIN code, the PIN code lock symbol appears on the menu bar.
Setting
Enter a PIN code
Use the Point ed buttons to enter a number. Press the
Point 8 button to fix the number and move the red frame pointer to the next box. The number changes to “
✳
.” If you fixed an incorrect number, use the Point 7 button to move the pointer to the number you want to correct, and then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to
“Set.” Press the SELECT button so that you can start to operate the projector.
If you entered an incorrect PIN code, “PIN code” and the number (
✳✳✳✳
) will turn red for a moment. Enter the correct PIN code all over again.
Change the PIN code lock setting
Use the Point 7 8 buttons to select Off, On1, or On2 and then move the pointer to “Quit” with the Point d button.
Press the SELECT button to close the dialog box.
Change the PIN code
The PIN code can be changed to your desired fourdigit number. Press the Point d button to select “PIN code change” and press the SELECT button. The New
PIN code input dialog box appears. Set a new PIN code.
CAUTION:
WHEN yOU HAVE CHANGED THE PIN CODE, WRITE
DOWN THE NEW PIN CODE IN COLUMN OF THE
PIN CODE NO . MEMO ON PAGE 80, AND KEEP IT
SECURELy . IF yOU FORGET yOUR PIN CODE, THE
PROjECTOR CAN NO LONGER BE STARTED .
Enter a PIN code
After a correct PIN code is entered, the following dialog box appears.
Change the PIN code lock setting
Use the Point 7 8 buttons to switch between the options.
Change the PIN code
Alarm
This function allows you to configure the Alarm operation. See “How to Use the Antitheft Alarm Function” on pages 58–60.
55
Setting
Fan
This function provides the following options in the cooling fans’ operation when the projector is turned off (p.23).
L1 ...... Normal operation
L2 ...... Slower and lower-sound than the normal operation
(L1), but it takes more time to cool the projector down.
Fan control
Choose the running speed of cooling fans from the following options.
Normal ..... Normal speed
Max .......... Faster than the normal speed.
This function is used to set the cooling fans’ operation to the projector’s setting environment. Set this function properly in accordance with the projector’s installation method.
Otherwise, the cooling fans will not work properly and that causes malfunctions of the projector and decreases the lamp life.
Be sure to set the Fan control in MAX in the setting menu when the projector is inclined between +40 degrees to
+140 degrees to the horizontal plane.
Warning log
This function records anomalous operations while the projector is in operation and use it when diagnosing faults.
Up to 10 warning logs are displayed with the latest warning message at the top of the list, followed by previous warning messages in chronological order.
✔ Note:
• When the Factory default function is executed, all the warning log records will be deleted.
Lamp counter
This function is used to reset the lamp counter.
When the lamp life is left less than 100 hours, the Lamp replacement icon (Fig.1) will appear on the screen, indicating that the end of lamp life is approaching.
When the lamp life is left 0 hour, the Lamp replacement icon
(Fig.2) will appear on the screen, indicating that the end of lamp life is reached.
56
When replacing the projection lamp, reset the lamp counter.
See "Resetting the Lamp Counter" on page 66.
✔ Note:
• The Lamp replacement icons (Fig.1 and Fig.2) will not appear when the Display function is set to “Off” (p.48), during “Freeze” (p.28), or “No show” (p.29).
Fan
Fan Control Setting
50º 50º
40º
Fan Control
"Max"
180º
Fan Control
"Normal"
0º
40º
Fig .1
Lamp replacement icon
+50º 0º
NG
-50º
This icon appears on the screen when the end of lamp life is approaching.
✔ Note:
GOOD
180º
• This icon also appears at turning on and selecting input source.
Fig .
Lamp replacement icon
This icon appears on the screen when the end of lamp life is reached.
✔ Note:
• At turning on, the icon (Fig.2) will appear.
At selecting input source, the icon (Fig.1) will appear.
Setting
Filter counter
This function is used to set a frequency for the filter cleaning.
When the projector reached a specified time between cleanings, a Filter warning icon appears on the screen, notifying the cleaning is necessary. After cleaning the filter, be sure to select RESET and set the timer. The Filter warning icon will not turn off until the filter counter is reset.
For details about resetting the timer, refer to “Resetting the
Filter Counter” on page 63.
Filter counter
Fig .3
Filter warning icon
Use the Point 7 8 buttons to set the timer. Select from (Off/100H/ 200H/
300H) depending on the use environment.
Filter warning icon appears on the screen at a set time.
✔ Note:
• This icon also appears at turning on..
Fig .
Filter warning icon
✔ Notes:
• At selecting input source, the icon (Fig.4) will appear..
• The Filter warning icons (Fig.3 and
Fig.4) will not appear when the Display function is set to “Off” (p.48), during
“Freeze”(p.28), or "No show" (p.29).
Factory default Factory default
This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp counter, and filter counter to the factory default settings.
Quit
Exit the Setting Menu.
Select Factory default and this box appears. Select [Yes], and the next box appears.
Select [Yes] to activate it.
57
How to Use the Antitheft Alarm Function
Antitheft alarm function is provided to prevent the projector from being stolen. When this function is set to “On,” the alarm rings as an unauthorized person tries to move the projector.
To activate the Alarm function for the first time after purchase, you must turn on the power once.
✔ Notes:
• This function is not a guarantee against stealing.
• The alarm does not ring while the AC power cord is connected to an outlet even if the projector detects vibrations.
• The alarm will stop, as the AC power cord is connected to an outlet, except when the battery cover is open.
• Pressing the buttons is always accompanied by a sound. If no sound is produced after pressing a button, you need to press it again.
The Alarm function is operated by a built-in rechargeable battery. The alarm will not work properly if the battery is not charged enough. See page 60 for details.
Set and release the Antitheft alarm function
The Alarm setting and release and PIN Code change can be made without an AC power connection.
Set the alarm
Press the F button three times to turn the alarm function on. The ALARM indicator blinks for a few seconds and the projector enters the warning mode. (If the battery is not charged enough for the alarm function to operate normally, it bleeps and the Alarm indicator will blink red every 20 seconds.)
During the Antitheft alarm function is on, the projector emits a low-pitched sound when it detects vibration.
When the projector does not detect vibration for a few seconds after the sound, it goes back to the warning mode.
When the projector detects more vibrations after the lowpitched sound, the alarm starts ringing.
The Alarm operating configuration (Battery charge, Alarm volume, Sensitivity, and Ringing time) can be selected in the menu. See page 59.
✔ Notes:
• You can test the alarm sound without setting the alarm function. Press and hold the F button, then the alarm starts ringing. The duration of the alarm sound is the same as the “Ringing Time” setting (p.59).
• If you want to stop the alarm while it is ringing, insert the AC power cord to an outlet or press the F button and enter the four-digit PIN code number.
Release the alarm setting
Press the F button and enter the four-digit PIN code number within about 10 seconds . (The default PIN code is set to “1111 .”) When the alarm is released, you will hear a high-pitched confirmation sound .
When you enter an incorrect PIN code, you will hear a lowpitched sound . If you enter an incorrect PIN code three times in a row, the alarm will start ringing .
Top Control
Rear Terminal
F button Button 1, 2, 3
ALARM indicator
58
Antitheft Alarm Function
Other settings
Change the PIN code
1 Press the F button and enter the four-digit PIN code number within about 10 seconds. The ALARM indicator blinks red for a few seconds and a high-pitched confirmation sound is produced.
While the indicator is blinking, enter a new PIN code, then you will hear a high-pitched confirmation sound and the ALARM indicator is turned off.
When you enter an incorrect PIN code, you will hear a low-pitched sound. If you enter incorrect PIN code three times in a row, the alarm will start ringing.
The PIN code for the Antitheft alarm function is a combination of 1, 2, or 3. Use the buttons 1, 2, and 3 to enter the PIN code. The default PIN code is “1111.”
Reset the settings
Select “Factory default” in the Setting menu to reset the settings for the Antitheft alarm function.
✔ Note:
• This is effective only when the Antitheft alarm setting is released.
Alarm operating configuration
The Alarm operating configuration can be changed when the Antitheft alarm function is set to “Off.” See page 58 for setting or releasing this function.
Press the SELECT button at Alarm icon in the Setting Menu to display the Alarm setting dialog box. Use the Point ed buttons to select the desired option; use the Point 7 8 buttons to set the selected option.
Battery charge
See the next page for details.
Alarm volume
Small, Medium, Large
Sensitivity
Low ..................... Less sensitive
Medium .............. Normal sensitivity
High ................... Highly sensitive (default)
Ringing time
10 seconds ........ Rings about 10 seconds (default).
60 seconds ........ Rings about 60 seconds.
Long time ............ Rings until the end of the battery life.
CAUTION:
WHEN yOU HAVE CHANGED THE PIN CODE, WRITE DOWN
THE NEW PIN CODE IN COLUMN OF THE PIN CODE NO . MEMO
ON PAGE 80, AND KEEP IT SECURELy . IF yOU FORGET yOUR
PIN CODE, SOME SETTINGS OF THE ANTITHEFT ALARM
FUNCTION CAN NO LONGER BE CHANGED .
Top Control
Rear Terminal
F button Button 1, , 3
Alarm
ALARM indicator
Press the SELECT button at the Alarm icon to display the
Alarm setting dialog box.
Use the Point 7 8 buttons to set the selected option.
✔ Notes:
• The Alarm icon appears dimmed and can be unavailable when the Antitheft alarm function is set to “On” or if the battery is not installed, discharged, or coming to the end of its life.
• When the “Security” is selected in the Setting menu, the Antitheft alarm setting buttons can be unavailable.
• When selecting “Long time” option in the Ringing time, the duration of alarm sounding differs depending on the battery life.
59
Antitheft Alarm Function
Charge the built-in batteries
Set the Battery charge option in the Alarm setting menu to
“Auto.” The default setting is “Auto.”
As long as the AC power cord is connected and this option is set to “Auto,” the built-in battery for Alarm function is being charged at all times. While charging the battery, “Charging” is displayed in the menu.
The “Charging” appears dimmed when the battery is fully charged or the Battery charge option is set to “Off,” or if charging malfunction occurs. Set the option to “Off” when not using the Alarm function. This can save the power and battery life.
Replace the rechargeable batteries
Use only the specified battery for this projector. Using other types of battery may cause accident or fire hazard.
Replacement Battery: SANYO Ni-MH BATTERY PACK
Part No. 645 089 8587
How to replace the rechargeable batteries
1 Unplug the AC power cord from a wall outlet.
Set the Alarm function to “Off” (see page 58). If it is not released, the alarm will start ringing when you try to remove the rechargeable battery cover.
3 Remove the screw from the rechargeable battery cover and open the cover.
Pull out the battery connector and remove the battery.
5
6
Install new battery and plug the connector into the socket.
Note: The battery connector has polarity. Observe battery polarity when installing.
Put back the battery cover and secure it with the screw.
Caution: Tighten the screw securely. If you fail to do so, the alarm will not operate. Do not use any other screws. This may cause damage to the projector.
Screw
Remove the screw and open the battery cover.
Install the battery, then put back the battery cover and secure it with the screw.
✔ Note:
• The PIN code and settings you have changed are effective even after the battery is changed.
• Unplug the battery connector if you carry your projector frequently and use the carrying case. If you do not unplug the battery connector, the alarm may be triggered when the Alarm buttons are accidentally pressed inside the carrying case.
60
Antitheft Alarm Function
SAFETY PrEcAuTionS For SAnYo ni-MH BATTErY PAcK
Observe the following precautions when handling the built-in battery pack of the projector:
● MAKE SURE THAT THE BATTERY PACK IS INSTALLED IN THE PROJECTOR WHEN
RECHARGING. USING THE CHARGERS OTHER THAN THE PROJECTOR MAY CAUSE
EXPLOSION OR A FIRE.
● The rechargeable battery pack is for use exclusively with this projector. Do not use in other products or this may cause accident.
● Do not throw the battery into fire or heat it. Doing so may cause an explosion or fire.
● Never attempt to disassemble, modify, reconstruct, or solder lead wires directly on to the battery.
● Do not drop or subject to strong forces. Doing so may cause the battery to leak fluid or explode.
● Do not expose to direct sunlight or high temperatures. This may degrade battery performance or cause leakage.
● Avoid contact with water or liquid. Exposure to water or liquid could result in battery corrosion or damage.
● Keep out of reach of children. They may accidentally swallow the battery.
● Do not short-circuit battery terminals with metal objects. Do not store with metal objects or in a metal case.
● The rechargeable battery pack has a limited number of charge cycles and eventually need to be replaced. If it can no longer be recharged, stop charging immediately and replace it with new one.
● Recharge the battery in a place where the temperature is always between 32˚F to 104˚F (0˚C to 40˚C) .
Charging in the temperature out of this range may result in fluid leak, heat generation, or shortening battery life.
● If you do not use the projector or the Antitheft alarm function for a long period of time, remove the battery from the projector and store it in a place where the temperature is always between –4˚F to 86˚F
(–20˚C to 30˚C) .
● If a battery leaks and fluid comes in contact with skin, this may cause skin irritation. Flush the affected area thoroughly with water.
● If a battery leaks and fluid gets in contact with eyes, wash your eyes with water immediately and seek medical attention.
● Dispose of used batteries according to your local disposal rule and guidelines.
61
Maintenance and Cleaning
Warning Indicator
The WARNING indicator shows the state of the function which protects the projector. Check the state of the
WARNING indicator and the POWER indicator to take proper maintenance.
The projector is shut down and the WARNING indicator is blinking red .
When the temperature inside the projector reaches a certain level, the projector will be automatically shut down to protect the inside of the projector. The POWER indicator is blinking while the projector is being cooled down. When the projector has cooled down enough (to its normal operating temperature), it can be turned on again by pressing the
POWER ON/STAND-BY button.
✔ Note:
• The WARNING indicator continues to blink even after the temperature inside the projector returns to normal.
When the projector is turned on again, the WARNING indicator stops blinking.
Top Control
WARNING blinking red
Then check the matters below:
– Did you provide appropriate space for the projector to be ventilated? Check the installing condition to see if the air vents of the projector are not blocked.
– Has the projector been installed near an Air-Conditioning/
Heating Duct or Vent? Move the installation of the projector away from the duct or vent.
– Is the filter clean? Clean the filter periodically.
The projector is shut down and the WARNING indicator lights red .
When the projector detects an abnormal condition, it is automatically shut down to protect the inside of the projector and the WARNING indicator lights red. In this case, unplug the AC power cord and reconnect it, and then turn the projector on once again to verify operation. If the projector cannot be turned on and the WARNING indicator still lights red, unplug the AC power cord and contact the service station.
CAUTION
DO NOT LEAVE THE PROJECTOR WITH THE
AC POWER CORD CONNECTED UNDER AN
ABNORMAL CONDITION. IT MAY RESULT IN
FIRE OR ELECTRIC SHOCK.
Top Control
WARNING emit a red light
6
Maintenance and Cleaning
1
3
Cleaning the Filter
Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. If a “Filter warning” icon appears on the screen, clean the filter immediately. Clean the filter by following the steps below.
Turn off the projector, and unplug the AC power cord from the AC outlet.
Turn the projector over and remove the filter by pulling the latches upward.
Gently clean the filter by using a brush or rinse it softly.
When rinsing the filter, dry it well. Replace the filter properly. Make sure that the filter is fully inserted to the projector.
CAUTION
Do not operate the projector with the filter removed.
Dust may accumulate on the optical elements degrading picture quality.
Do not put anything into the air vents. Doing so may result in malfunction of the projector.
RECOMMENDATION
We recommend avoiding dusty/smoky environments when you operate the projector . Usage in these environments may cause poor image quality .
When using the projector under dusty or smoky conditions, dust may accumulate on a lens, LCD panels, or optical elements inside the projector degrading the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning.
Filter
Pull up and remove.
✔ Note:
• When reinserting this filter, be sure that the slit part is facing the outer side.
Resetting the Filter Counter
Be sure to reset the Filter counter after cleaning or replacing the filters.
1
3
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon.
Use the Point ed buttons to move the red frame pointer to Filter counter and then press the SELECT button. A dialog box appears showing the total accumulated time of the filter use, a timer setting option, and the reset option. Select Reset and the
“Filter counter Reset?” appears. Select [Yes] to continue.
Another confirmation dialog box appears, select [Yes] to reset the Filter counter.
Filter counter
Select Reset and the “Filter counter Reset?” appears.
Select [Yes], then another confirmation box appears.
Select [Yes] again to reset the Filter counter.
63
Maintenance and Cleaning
Attaching the Lens Cover
When moving this projector or while not using it over an extended period of time, replace the lens cover.
Attach the lens cover according to the following procedures.
1 Pass the string through a hole of the lens cover.
2 Turn over the projector and remove the screw with a screwdriver.
3 Attach the string with lens cover to a hole at the bottom of the projector and secure it with a screw.
Cleaning the Projection Lens
Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens.
Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the lens.
Cleaning the Projector Cabinet
Unplug the AC power cord before cleaning.
Gently wipe the projector body with a soft dry cleaning cloth.
When the cabinet is heavily soiled, use a small amount of mild detergent and finish with a soft dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the cabinet.
When the projector is not in use, put the projector in an appropriate carrying case to protect it from dust and scratches.
6
Lens Cover
Hole
String for the lens cover
Secure it to the hole with a screw.
Lamp Replacement
When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and
LAMP REPLACE indicator lights yellow. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator should light is depending on the lamp mode.
Top Control
Maintenance and Cleaning
LAMP REPLACE indicator
WARNING:
TURN OFF THE UV LAMP BEFORE
OPENING THE LAMP COVER
Lamp replacement icon
✔ Note:
• The Lamp replacement icon will not appear when the
Display function is set to “Off” (p.48), during “Freeze”
(p.28), or “No show” (p.29).
CAUTION
Allow a projector to cool for at least 45 minutes before you open the Lamp cover. The inside of the projector can become very hot.
Follow these steps to replace the lamp.
1 Turn off the projector and unplug the AC power cord.
Let the projector cool for at least 45 minutes.
Remove the screw and open the lamp cover.
3 Remove the two (2) screws that secure the lamp. Lift the lamp out of the projector by using the handle.
Replace the lamp with a new one and secure the two
(2) screws. Make sure that the lamp is set properly.
Close the lamp cover and secure the screw.
5 Connect the AC power cord to the projector and turn on the projector.
6 Reset the lamp counter .
See “Resetting the Lamp Counter” on the next page.
CAUTION
For continued safety, replace with a lamp of the same type. Do not drop a lamp or touch a glass bulb! The glass can shatter and may cause injury.
Lamp Cover
Press here and pull upward.
Screw
Handle
Screw
Screw
Lamp
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer.
●
Model No . of your projector : PLC-WXU30
●
Replacement Lamp Type No . : POA-LMP111
(Service Parts No. 610 333 9740)
65
Maintenance and Cleaning
Resetting the Lamp Counter
Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP
REPLACE indicator stops lighting and the Lamp replacement icon disappears.
1
3
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon.
Use the Point ed buttons to move the red frame pointer to Lamp counter and then press the SELECT button. A dialog box appears showing the total accumulated time of the lamp usage and the reset option. Select Reset and the “Lamp replacement counter Reset?” appears. Select [Yes] to continue.
Another confirmation dialog box appears, select [Yes] to reset the Lamp counter.
Select Reset and the
“Lamp replacement counter
Reset?” appears.
✔ Note:
• Do not reset the Lamp counter without implementing lamp replacement. Be sure to reset the Lamp counter only after replacing the lamp.
Select [Yes], then another confirmation box appears.
Select [Yes] again to reset the
Lamp counter.
66
LAMP HANDLING PRECAUTIONS
This projector uses a high-pressure lamp which must be handled carefully and properly.
Improper handling may result in accidents, injury, or create a fire hazard.
●
Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time than other similar lamps.
●
If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.
(Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.
●
A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used.
IF A LAMP EXPLODES, THE FOLLOWING SAFETy PRECAUTIONS SHOULD BE TAKEN .
If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken glass.
Appendix
Troubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
– Make sure you have properly connected the projector to peripheral equipment as described on pages 19-21.
– Make sure all equipment is connected to AC outlet and the power is turned on.
– When the projector does not project an image from the connected computer, restart the computer.
Problem: – Solutions
No power – Plug the power cord of the projector into the AC outlet.
– See if the POWER indicator lights red.
– Wait until the POWER indicator stops blinking to turn on the projector again. The projector can be turned on after the POWER indicator turns red. See page 22.
– Check the WARNING indicator. If the WARNING indicator lights red,
projector cannot be turned on. See page 62.
– Check the projection lamp. See page 65.
– Unlock the Key lock function for the projector. See page 54.
The initial display is not shown. – Make sure "User" or "Countdown off" are not chosen at display
function.(see page 48)
The initial display is not same – Make sure "User" or "Countdown off" are not chosen at Logo (select) as the default set. function.(see page 48)
Input signal switches automatically. – Make sure Input search function is adjusted properly. See page 51.
(or does not switch automatically)
When the projector is on and you – That is the Filter warning icon. Refer to page 57.
press the input button, an icon other than the Lamp mode icon appears .
An icon other than Input mode or – That is the Lamp replacement icon or the Filter warning icon. See
Lamp mode icon appears. page 56 or 57.
Image is out of focus.
– Adjust focus of the projector. See page 26.
– Provide proper distance between the projector and the projection
screen. See page 17.
– Check the projection lens to see if it needs cleaning. See page 64.
– Moving the projector from a cool to warm place may result in
moisture condensation on the projection lens. In such cases, leave
the projector off and wait until condensation evaporates.
Image is Left/Right reversed.
Image is Top/Bottom reversed.
Picture is not bright enough.
– Check the Ceiling/Rear function. See page 51.
– Check the Top/Bottom function. See page 51.
– Check if the 'Contrast" or "Brightness" are adjusted properly.(see
page 37,44)
– Check if "Image mode" is selected properly.(see page 36,43)
– Check the lamp control function.(see page 28)
– Check the LAMP REPLACE indicator. If it lights, the end of lamp life
is approaching. Replace the lamp with a new one promptly.(see page
65)
67
Appendix
Some displays are not seen during the operation .
Auto PC adjustment function does not work .
The setting does not remain after turning off power .
Power management does
work .
– Check the Display function. See page 48.
– Check the Input signal. Auto PC function can not work when
480p,575p.720p,480i,575i,1035i or 1080i is selected or when the
digital signal is input into DVI terminal.(see Page 34)
– The icon is not available in grayout when the digital signal is input.
– Make sure you selected "Store" after adjusting setting. Some settings
can not be stored if not registered with "Store".(see page 45)
– Power management function can not work while "Freeze" or "No
Show" function is running.(see page 52)
Capture function does not work .
– Check the connection and the input signal to see if there is signal.
Auto setup does not work properly .
– Make sure "Off" is not selected at the Auto setup function.(see page
47)
– Make sure "On" is not selected at the Ceiling funtion.(see page 51)
68
Auto keystone function does not – Make sure the Auto keystone function is not set to "Manual". Press work even when the projector is the AUTO SET UP button on the top control.(see page 26,47)
tipped .
Appendix
Appendix Appendix
The image is distorted or runs off . – Check "PC adjustment" menu or "Screen" menu and adjust them.
(page 33-34, 38-39)
PIN code dialog box appears at start-up .
– PIN code lock is being set. Enter a PIN code (the “1234” or numbers
you have set). See pages 22, 54–55.
Page Up/Down function does – Make sure your computer is connected to the projector with USB not work . cable.(see page 19)
– Check cable connection between the projector and your computer.
(see page 19)
The Remote Control does not work .
– Check the batteries.
– Make sure no obstruction is between the projector and remote
control.
– Make sure you are not too far from the projector when using the
remote control. Maximum operating range is 16.4'(5 m).
– Wireless reomete control does not work when the remote control
cable is connected to the projector.(see page 13)
– Make sure the code of the remote control is conformed to the
projector’s code. See page 53.
– Unlock the Key lock function for the remote control function. See
page 54.
– Check RESET/ON/ALL-OFF switch on the remote control is set to
“ON”. See page 15.
Alarm does not stop ringing .
– Connect the AC power cord to the AC outlet. (Alarm will not
stop ringing when the alarm goes off while trying to remove the
rechargeable battery cover.)
Indicator blinks or lights . – Chek the status of the projector with referring to "Indicators and
projector Condition".(see page 73 )
page 58)
– In the case of the ALARM indicator blinks, check the setting.(see
Wireless Mouse function does
not work .
– Check the connection between a projector and your computer.
– Check the mouse setting on you computer.
– Make sure the mouse driver is installed on your computer,
– Your operation is invalid. Operate correctly.
otherwise, the remote control can not be used as a wireless mouse.
– Make sure the signal is from the computer, otherwise, the remote
control can not be used as a wireless mouse.
– Turn on the projector before turning on the computer.
The exclamation mark appears on the screen .
Top control does not work . – The top control is not available if the top cotrol is locked at "Key lock"
under "Security" of SETTING section. Please check "SETTING"
section on page 54.
Uable to unlock the Logo PIN code lock, Security key lock or Security PIN code lock .
– Contact the dealer where you purchased the projector or the service
center.
69
Appendix
Warning mode is not turned on .
– If you cannot hear the bleeping sound when you press the Alarm
buttons, you are not pressing the buttons correctly. Try to set the
Alarm setting again.
WARNING :
High voltages are used to operate this projector . Do not attempt to open the cabinet .
If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service.
The CE Mark is a Directive conformity mark of the European Community (EC).
This symbol on the nameplate means the product is Listed by Underwriters Laboratories
I n c . I t i s d e s i g n e d a n d manufactured to meet rigid
U.L. safety standards against risk of fire, casualty and electrical hazards.
70
Appendix
Appendix
Menu Tree
Computer Input/Video Input
Input Computer 1 (Analog)
Computer 1 (Digital)
Computer 2
Video
Wired
Wireless*
Sound
Sound Volume
Mute
Quit
Computer Input
System
(1)
SVGA 1
Mode 1
Mode 2
- - - -
✽ Systems displayed in the System Menu vary depending on an input signal.
PC Adjust Auto PC Adj.
Fine sync
Total dots
Horizontal
Vertical
Current mode
Clamp
Display area H
Display area V
Reset
Mode free
Store
0–63
On/Off
0–31
H-sync freq.
V-sync freq.
Quit
Yes/No
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Quit
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Quit
Quit
RGB (PC digital)
RGB (AV HDCP)
Quit
RGB
Component
RGB (Scart)
Quit
Auto
Video
S-video
Quit
Image Select
Image Adjust
Screen
Go to System
(1)
N/A
N/A
Go to System
(1)
Go to System
(2)
N/A
Go to System
(3)
Go to System
(3)
Go to System
(3)
See owner’s manual “Network Set-up and Operation”
See owner’s manual “Network Set-up and Operation”
N/A ........ not applicable
Dynamic
Standard
Real
Blackboard (Green)
Image 1
Image 2
Image 3
Image 4
Contrast
Brightness
Color temp.
Red
Green
Blue
Sharpness
Gamma
Reset
Store
Quit
Normal
True
Full
Custom
Digital zoom +
Digital zoom –
Scale
H&V
Position
Common
Reset
Quit
0–63
0–63
High
Mid
Low
XLow
Adj.
0–63
0–63
0–63
0–15
0–15
Yes/No
Image 1
Image 2
Image 3
Image 4
Quit
H/V
H/V
Yes/No
Yes/No
71
Appendix
Video Input
System
(2)
System
(3)
Image Select
Auto
1080i
1035i
720p
575p
480p
575i
480i
Auto
PAL
SECAM
NTSC
NTSC 4.43
PAL-M
PAL-N
Dynamic
Standard
Cinema
Blackboard (Green)
Image 1
Image 2
Image 3
Image 4
Image Adjust
Screen
Contrast
Brightness
Color
Tint
Color temp.
Red
Green
Blue
Sharpness
Gamma
Noise reduction
Progressive
Reset
Store
Quit
Normal
Zoom
Natural wide
Custom
XLow
Adj.
0–63
0–63
0–63
0–15
0–15
Off
L1
L2
Off
0–63
0–63
0–63
0–63
High
Mid
Low
L1
L2
Film
Yes/No
Image 1
Image 2
Image 3
Image 4
Quit
Setting
Setting
Scale
H&V
Position
Common
Reset
Quit
H/V
H/V
Yes/No
Yes/No
Language
Auto setup
Keystone
Blue back
Display
Logo
Ceiling
Rear
Input search
Standby mode
Power management
On start
Lamp control
Pointer
Remote control
Security
Fan
Fan control
Warning log
Lamp counter
16 languages provided.
Quit
Auto PC adj.
On/Off
Auto keystone
Auto
Store/Reset
Manual
Off
On/Off
On/Countdown off/Off
Logo select
Off
Default
User
Capture
Yes/No
Logo PIN code lock
Off/On
Logo PIN code change
Quit
Quit
On/Off
On/Off
Off/On1/On2
Eco/Normal
Off
Ready
Shut down
Timer (1–30 Min.)
Quit
On/Off
Normal/Auto/Eco
Spotlight/Pointer
Quit
Code 1–Code 8
Key lock
Off
Projector
Remote control
Quit
PIN code lock
Off/On1/On2
PIN code change
Quit
Alarm
Off
Battery charge
Alarm volume
Sensitivity
Quit
L1/L2
Normal/Max
Ring time
Quit
On
Off/Auto
Small/Medium/Large
Low/Medium/High
10 seconds/60 seconds/Long time
Filter counter
Factory default
Quit
Hour(s)
Reset
Reset
Quit
Yes/No
Yes/No
Quit
Hour(s)
Off/100H/200H/300H
Yes/No
7
Indicators and Projector Condition
Check the indicators for projector condition. For Alarm indicator, see page 58.
POWER red/green
Indicators
WARNING red
LAMP
REPLACE yellow
Projector Condition
The projector is off. (The AC power cord is unplugged.)
Appendix
✽
✽
✽
✽
✽
✽
✽
The projector is in stand-by mode. Press the POWER ON/STAND-
BY button to turn on the projector.
The projector is operating normally.
The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed and the POWER indicator stops blinking.
The projector is in the Power management mode.
The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to normal, the POWER indicator stops blinking and the projector can be turned on. (The
WARNING indicator keeps blinking.) Check and clean the filter.
The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING indicator stops blinking. Check and clean the air filter.
The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard.
• • • green.
• • • red • • • off
• • • blinks green.
• • • blinks red.
When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter after replacing the lamp. See pages 65-66.
73
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock for analog signal and 110 MHz of Dot Clock for digital signal.
When selecting these modes, PC adjustment can be limited.
RESOLUTION
640 x 480
720 x 400
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
768 x 575
––––––––
––––––––
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
SVGA 1
SVGA 2
SVGA 3
SVGA 4
SVGA 5
SVGA 6
SVGA 7
SVGA 8
SVGA 9
SVGA 10
SVGA 11
MAC 16
MAC 19
XGA 1
XGA 2
ON-SCREEN
DISPLAy
VGA 1
VGA 2
VGA 3
VGA 4
VGA 5
VGA 6
VGA 7
MAC LC13
MAC 13
480p
575p
480i
575i
XGA 3
XGA 4
XGA 5
XGA 6
XGA 7
XGA 8
XGA 9
XGA 10
XGA 11
XGA 12
XGA 13
XGA 14
XGA 15
60.51
74.55
75.08
60.00
84.997
75.03
70.07
74.92
60.02
54.58
79.35
56.25
60.32
75.00
85.06
72.19
61.03
55.38
60.51
60.31
51.09
V-Freq .
(Hz)
59.88
70.09
70.09
74.38
72.81
75.00
85.00
66.60
66.67
59.88
50.00
60.00
50.00
77.07
75.70
58.20
58.30
72.00
35.156
37.88
46.875
53.674
48.08
37.90
34.50
38.00
38.60
32.70
38.00
49.72
60.24
48.36
68.677
H-Freq .
(KHz)
31.47
31.47
31.47
37.86
37.86
37.50
43.269
34.97
35.00
31.47
31.25
15.734
15.625
60.023
56.476
60.31
48.50
44.00
63.48
36.00
62.04
61.00
35.522
46.90
47.00
58.03
RESOLUTION
1400 x 1050
1400 x 1050
1400 x 1050
1152 x 870
1280 x 960
1280 x 1024
1366 x 768
1360 x 768
1376 x 768
1360 x 768
1280 x 768
1280 x 768
1280 x 768
1280 x 800
1600 x 1200
1600 x 1200
1600 x 1200
1600 x 1200
1280 x 720
1280 x 720
1920 x 1035
1920 x 1080
1920 x 1080
1152 x 864
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 960
1152 x 900
1152 x 900
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1152 x 900
1280 x 1024
1280 x 1024
1280 x 1024
SXGA 13
SXGA 14
SXGA 15
SXGA 16
SXGA 17
SXGA 18
SXGA 19
SXGA 20
SXGA+ 1
SXGA+ 2
SXGA+ 3
MAC21
MAC
MAC
WXGA 1
ON-SCREEN
DISPLAy
SXGA 1
SXGA 2
SXGA 3
SXGA 4
SXGA 5
SXGA 6
SXGA 7
SXGA 8
SXGA 9
SXGA 10
SXGA 11
SXGA 12
WXGA 2
WXGA 3
WXGA 4
WXGA 6
WXGA 7
WXGA 8
WXGA 9
UXGA 1
UXGA 2
UXGA 3
UXGA 4
720p
720p
1035i
1080i
1080i
V-Freq .
(Hz)
70.40
58.60
60.00
59.98
60.01
67.19
76.107
60.02
75.025
60.00
65.20
75.60
(Interlace)
(Interlace)
60.01
72.00
66.00
60.00
60.00
72.00
59.87
74.893
84.837
60.05
60.00
65.00
60.18
85.024
60.19
60.12
59.90
75.06
75.08
75.08
60.00
70.00
75.00
60.00
50.00
60.00
60.00
63.97
65.35
65.12
68.68
75.00
80.00
48.36
50.00
50.00
63.37
76.97
61.85
46.43
63.79
91.146
H-Freq .
(KHz)
64.20
62.50
63.90
63.34
63.74
71.69
81.13
63.98
79.976
60.00
61.20
71.40
47.70
48.36
56.16
47.776
60.289
68.633
49.60
75.00
81.25
87.5
93.75
45.00
37.50
33.75
33.75
28.125
7
Appendix
When the input signal is digital from DVI terminal, refer to the chart below.
ON-SCREEN
DISPLAy
D-VGA
D-480p
D-575p
D-SVGA
D-XGA
D-WXGA 1
D-WXGA 2
D-WXGA 3
D-WXGA 4
D-WXGA 5
D-WXGA 6
D-WXGA 7
D-WXGA 9
RESOLUTION
640 x 480
640 x 480
768 x 575
800 x 600
1024 x 768
1366 x 768
1360 x 768
1376 x 768
1360 x 768
1366 x 768
1280 x 768
1280 x 768
1280 x 800
H-Freq .
(KHz)
31.47
31.47
31.25
37.879
43.363
48.36
47.7
48.36
56.160
46.500
47.776
60.289
49.600
V-Freq .
(Hz)
59.94
59.88
50.00
60.32
60.00
60.00
60.00
60.00
72.000
50.000
59.870
74.893
60.050
ON-SCREEN
DISPLAy
D-SXGA1
D-SXGA2
D-SXGA+1
D-720p
D-720p
D-1035i
D-1080i
D-1080i
RESOLUTION
1280 x 1024
1280 x 1024
1400 x 1050
1280 x 720
1280 x 720
1920 x 1035
1920 x 1080
1920 x 1080
H-Freq .
(KHz)
63.98
60.276
63.97
37.50
45.00
33.75
33.75
28.125
V-Freq .
(Hz)
60.02
58.069
60.19
50.00
60.00
(Interlace)
60.00
(Interlace)
(Interlace)
D-720p50
D-720p60
D-1080i60
D-1080i50
✔ Note:
• When the input signal is D-SXGA 1, D-SXGA 2, or D-SXGA+1, images may not be displayed properly depending on computers.
• The specifications are subject to change without notice.
75
Appendix
76
Technical Specifications
Mechanical Information
Projector Type
Dimensions (W x H x D)
Net Weight
Feet Adjustment
Panel Resolution
LCD Panel System
Panel Resolution
Number of Pixels
Signal Compatibility
Color System
Multi-media Projector
334 mm x 78 mm x 257.5mm (Not including adjustable feet)
3.7 kg
0˚ to 8.9˚
0.74” TFT Active Matrix type, 3 panels
1,280 x 800 dots
3,072,000 (1,280 x 800 x 3 panels)
PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
H-sync. 15 kHz–100 kHz, V-sync. 50–100 Hz
High Definition TV Signal
Scanning Frequency
Optical Information
Projection Image Size (Diagonal)
Throw Distance
Projection Lens
Projection Lamp
Adjustable from 40” to 300”
3.3'(1.0 m) –39.7'(12.1m)
F1.7–2.5 lens with f=19.2 mm–30.2 mm with manual zoom and focus
275 W
Interface
Video Input Jack
S-video Input Jack
Audio Input Jacks
Computer Input 1/DVI-I Input Terminal
RCA Type x 1
Mini DIN 4 pin x 1
RCA Type x 2
DVI-I Terminal X 1
Computer Input 2/Component Input Terminal Mini D-sub 15 pin X 1
Monitor Output Terminal Mini D-sub 15 pin x 1
Computer/Component Audio Input Jack Mini Jack (stereo) x 1
Service Port Connector
USB Connector
Mini DIN 8 pin x 1
USB Series B connector x 1
Audio Output Jack Mini Jack (stereo) x 1 (variable)
LAN Connection Terminal 100 Base-TX (100Mbps)/10 Base-T (10Mbps), RJ45
SD Card Slot
Audio
Internal Audio Amp
Built-in Speaker
1.0 W RMS
1 speaker, ø28 mm
Power
Voltage and Power Consumption
Operating Environment
Operating Temperature
Storage Temperature
Remote Control
Battery
Operating Range
Dimensions
Net Weight
Laser Pointer
AC 100–120 V (4.0A Max. Ampere), 50/60 Hz (The U.S.A and Canada)
AC 200–240 V (2.0A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.)
41˚F–95˚F (5 ˚C–35 ˚C)
14˚F–140˚F (-10˚C–60 ˚C)
AAA or LR03 Type x 2
5 m/±30˚
45 mm (W) x 23 mm (H) x 145 mm (D)
99 g (including batteries)
Class II Laser (Max. Output: 1 mW/Wave length: 640–660 nm)
Appendix
Accessories
Owner’s Manual
Quick Reference Guide
AC Power Cord
Remote Control and Batteries
VGA Cable
Lens Cover with String
PIN Code Label
Lamp Replacement Label
Alarm Label
Network Application (CD-ROM)
Soft Carrying Case
● The specifications are subject to change without notice.
● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
Optional Parts
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer.
Model No.
COMPONENT~VGA Cable
SCART~VGA Cable
VGA-Cable (10 m)
: POA-CA-COMPVGA
: POA-CA-SCART
: KA-MC-DB10
77
Appendix
Pj Link Notice
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information
System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1.
For PJ Link password, see page 49 on the owner’s manual “Network Set-up and Operation.”
Projector Input
Computer1 (Analog)
Computer1
(Digital)
RGB (PC digital)
RGB (AV HDCP)
Computer2
Video
RGB
Component
RGB (Scart)
Auto
Video
S-video
Wired
Wireless
Memory viewer
PJLink Input
RGB 1
DIGITAL 1
DIGITAL 2
RGB 2
RGB 3
RGB 4
VIDEO 1
VIDEO 2
VIDEO 3
NETWORK 1
NETWORK 2
STORAGE 1
Parameter
11
31
32
12
13
14
21
22
23
51
52
41
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
78
Appendix Appendix
Configurations of Terminals
COMPUTER IN /COMPONENT IN /MONITOR OUT (ANALOG)
Terminal: Analog RGB (Mini D-sub 15 pin)
5
15
10
4
14
9
3
13
8
2
12
7
1
11
6
6
7
5
8
1
3
Red (R/Cr) Input/Output
Green (G/Y) Input/Output
Blue (B/Cb) Input/Output
-----
Ground (Horiz.sync.)
Ground (Red)
Ground (Green)
Ground (Blue)
1
13
1
15
9
10
11
+5V Power
Ground (Vert.sync.)
Ground
DDC Data
Horiz. sync. Input/Output (Composite H/V sync.)
Vert. sync.
DDC Clock
DVI-I TERMINAL (DIGITAL/ANALOG)
C1 C2
1
9
17
2
10
18
3
11
19
4
12
20
5
13
21
6
14
22
7
15
23
8
16
24
C3
C5
C4
6
7
5
8
1
3
C1
C
C3
C
C5
Analog Red Input
Analog Green Input
Analog Blue Input
Analog Horiz. sync
Analog Ground (R/G/B)
T.M.D.S. Data2–
T.M.D.S. Data2+
T.M.D.S. Data2 Shield
No Connect
No Connect
DDC Clock
DDC Data
Analog Vert. sync
1
13
1
15
16
9
10
11
T.M.D.S. Data1–
T.M.D.S. Data1+
T.M.D.S. Data1 Shield
No Connect
No Connect
+5V Power
Ground (for +5V)
Hot Plug Detect
0
1
3
17
18
19
T.M.D.S. Data0–
T.M.D.S. Data0+
T.M.D.S. Data0 Shield
No Connect
No Connect
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
USB CONNECTOR (Series B)
2
3
1
4
3
1 Vcc
- Data
+ Data
Ground
LAN TERMINAL
1
3
TX +
TX –
RX +
-----
7
8
5
6
8 7 6 5 4 3 2 1
SERVICE PORT CONNECTOR
Terminal : Mini DIN 8-PIN
5
8 7 6
4 3
2 1
3
1 R X D
-----
-----
GND
7
8
5
6
RTS/CTS
T X D
GND
GND
-----
RX –
-----
-----
79
Appendix
PIN Code Number Memo
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station.
PIN Code Lock No .
Factory default set No: 1 2 3 4*
Logo PIN Code Lock No .
Factory default set No: 4 3 2 1*
Alarm PIN Code No .
Factory default set No: 1 1 1 1*
*Should the four-digit number be changed, the factory set number will be invalid.
While the projector is locked with the PIN code.
Put the label below (supplied) on in a prominent place of the projector's body while it is locked with a PIN code.
While the Antitheft alarm function is set....
Put the label below (supplied) on in a prominent place of the projector’s body while the Antitheft alarm function is set.
80
Lamp Replacement Label
When using the projector ceiling-mounted, put the Lamp replacement label (supplied) on in a prominent place of the projector's body to check the Replacement Lamp Type
Number.
Lamp Replacement Label
Appendix
Dimensions
Appendix
!
Unit: inch(mm)
Screw Holes for Ceiling Mount
Screw: M4
Depth: 0.472(12.0)
!
81
KB3AC
SANyO Electric Co ., Ltd .
advertisement
Related manuals
advertisement
Table of contents
- 3 Features and Design
- 4 Table of Contents
- 5 To the Owner
- 6 Safety Instructions
- 7 Air Circulation
- 7 Moving the Projector
- 8 Installing the Projector in Proper Directions
- 8 Positioning Precautions
- 9 Compliance
- 10 Part Names and Functions
- 10 Front
- 10 Back
- 10 Bottom
- 11 Rear Terminal
- 12 Top Control
- 13 Remote Control
- 14 Laser Pointer Function
- 14 Pointer Function
- 15 Wireless Mouse Operation
- 15 Remote Control Code
- 16 Remote Control Battery Installation
- 16 Remote Control Operating Range
- 16 Adjustable Feet
- 17 Installation
- 17 Positioning the Projector
- 18 Connecting the AC Power Cord
- 19 a Computer
- 20 Connecting to Video Equipment
- 21 Connecting to Component Video Equipment
- 22 Basic Operation
- 22 Turning On the Projector
- 23 Turning Off the Projector
- 24 How to Operate the On-Screen Menu
- 25 Menu Bar
- 26 Zoom and Focus Adjustment
- 26 Auto Setup Function
- 26 Keystone Correction
- 27 Sound Adjustment
- 28 Remote Control Operation
- 30 Computer Input
- 30 Input Source Selection (RGB: Computer 1 (Analog)/Computer )
- 31 Input Source Selection (RGB(PC digital), RGB(AV HDCP))
- 32 Computer System Selection
- 33 Auto PC Adjustment
- 34 Manual PC Adjustment
- 36 Image Mode Selection
- 37 Image Adjustment
- 38 Screen Size Adjustment
- 39 For zooming in and out the images
- 40 Video Input
- 40 Input Source Selection (Video, S-video)
- 41 Input Source Selection (Component, RGB Scart 1-pin)
- 42 Video System Selection
- 43 Image Mode Selection
- 44 Image Adjustment
- 46 Screen Size Adjustment
- 47 Setting
- 47 Setting
- 58 Antitheft Alarm FunŁction
- 58 How to Use the Antitheft Alarm Function
- 59 Other settings
- 60 Charge the built-in batteries
- 62 Maintenance and Cleaning
- 62 Warning Indicator
- 64 Cleaning the Filter
- 64 Cleaning the Projection Lens
- 64 Cleaning the Projector Cabinet
- 65 Lamp Replacement
- 66 Resetting the Lamp Counter
- 67 Appendix
- 67 Troubleshooting
- 71 Menu Tree
- 73 Indicators and Projector Condition
- 74 Compatible Computer Specifications
- 76 Technical Specifications
- 77 Optional Parts
- 78 PJ Link Notice
- 79 Configurations of Terminals
- 80 PIN Code Number Memo
- 80 Lamp Replacement Label
- 81 Dimensions