HP LaserJet 2430tn User Guide
광고
광고
hp
LaserJet 2400 series
use
HP LaserJet 2400 series printer
User Guide
Copyright and License
© 2004 Copyright Hewlett-Packard
Development Company, L.P.
Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws.
The information contained in this document is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Part number Q5956-90941
Edition 1, 11/2004
Trademark Credits
Adobe ® and PostScript ® are trademarks of
Adobe Systems Incorporated.
Linux is a U.S. registered trademark of
Linus Torvalds.
Microsoft ® , Windows ® , and Windows NT ® are U.S. registered trademarks of Microsoft
Corporation.
UNIX ® is a registered trademark of The
Open Group.
ENERGY STAR ® and the ENERGY STAR logo ® are U.S. registered marks of the
United States Environmental Protection
Agency.
HP customer care
Online services
For 24-hour access to information by using a modem or Internet connection
World Wide Web: Updated HP printer software, product and support information, and printer drivers in several languages can be obtained from
http://www.hp.com/support/lj2420 , or http://www.hp.com/support/lj2430 . (The site is in
English.)
Online troubleshooting tools
HP Instant Support Professional Edition (ISPE) is a suite of Web-based troubleshooting tools for desktop computing and printing products. ISPE helps you quickly identify, diagnose, and resolve computing and printing problems. The ISPE tools are available at http://instantsupport.hp.com
.
Telephone support
Hewlett-Packard Company provides free telephone support during the warranty period.
When you call, you will be connected to a responsive team that is waiting to help you. For the telephone number for your country/region, see the flyer that came in the box with the product, or visit http://www.hp.com/support/callcenters . Before calling HP, have the following information ready: the product name and serial number, the date of purchase, and a description of the problem.
You can also find support on the Internet at http://www.hp.com
. Click the support & drivers block.
Software utilities, drivers, and electronic information
Go to http://www.hp.com/go/lj2410_software , http://www.hp.com/go/lj2420_software , or http://www.hp.com/go/lj2430_software . (The site is in English, but printer drivers can be downloaded in several languages.)
For information over the telephone, see the flyer that came in the box with the printer.
HP direct ordering for accessories or supplies
Order supplies from the following Web sites:
United States: http://www.hp.com/sbso/product/supplies
Canada: http://www.hp.ca/catalog/supplies
Europe: http://www.hp.com/go/supplies
Asia-Pacific: http://www.hp.com/paper/
Order accessories from
http://www.hp.com/support/lj2420 , or http://www.hp.com/support/lj2430
. For more information, see Ordering parts, accessories, and supplies .
To order supplies or accessories over the telephone, call the following numbers:
United States businesses: 800-282-6672
United States small and medium businesses: 800-888-9909
United States home and home offices: 800-752-0900
Canada: 800-387-3154
To find the phone numbers for other countries/regions, see the flyer that came in the box with the printer.
ENWW iii
iv
HP service information
To locate HP-Authorized Dealers in the United States or Canada, call 800-243-9816 (United
States) or 800-387-3867 (Canada). Or, go to http://www.hp.com/go/cposupportguide .
For service for your HP product in other countries/regions, call the customer support number for your country/region. See the flyer that came in the box with the printer.
HP service agreements
Call: 800-HPINVENT [800-474-6836 (U.S.)] or 800-268-1221 (Canada).
Out-of-Warranty Service: 800-633-3600.
Extended Service: Call: 800-HPINVENT [800-474-6836 (U.S.)] or 800-268-1221 (Canada).
Or, go to the HP Care Pack Services Web site at http://www.hpexpress-services.com
.
HP Toolbox
To check the printer status and settings and to view troubleshooting information and online documentation, use the HP Toolbox software. You can view the HP Toolbox when the printer is directly connected to your computer or when it is connected to a network. You must have performed a complete software installation to use the HP Toolbox. See
HP support and information for Macintosh computers
Visit: http://www.hp.com/go/macosx for Macintosh OS X support information and HP subscription service for driver updates.
Visit: http://www.hp.com/go/mac-connect for products designed specifically for the Macintosh user.
ENWW
Table of contents
ENWW
1 Printer basics
2 Printing tasks
Printing on letterhead, prepunched, or preprinted paper (single-sided) ..........................52
v
vi
3 Managing and maintaining the printer
To uninstall the HP Toolbox by using the Windows desktop shortcut .............................78
ENWW
ENWW
4 Problem solving
vii
viii
Appendix A Supplies and accessories
Appendix B Control panel menus
Appendix C Specifications
Appendix D Printer memory and expansion
To verify that DIMMs or CompactFlash cards are installed correctly ............................198
ENWW
ENWW
Appendix E Printer commands
Appendix F Regulatory information
Appendix G Service and support
Index
ix
x ENWW
1
Printer basics
Thank you for purchasing an HP LaserJet 2400 series printer. If you have not done so, see the getting started guide ( start ) provided with the printer for setup instructions.
Now that the printer is set up and ready to use, take a few moments to familiarize yourself with the printer. This section provides information about the following topics:
●
Quick access to printer information
●
●
●
●
●
●
ENWW 1
Quick access to printer information
This section summarizes the resources that are available to learn more about setting up and using the printer.
User guide links
●
●
●
Where to look for more information
Several references are available for use with this printer. See
http://www.hp.com/support/lj2420 , or http://www.hp.com/support/lj2430 .
Setting up the printer
Getting started guide —Provides step-by-step instructions for installing and setting up the printer. This hard-copy guide is included with each printer.
Network installation guide —Contains instructions to set up the printer on a network. This hard-copy guide is included with printers that come with an HP Jetdirect embedded print server.
HP Jetdirect Embedded Print Server Administrator's Guide —Contains information for configuring and troubleshooting an HP Jetdirect embedded print server. You can print a copy from the CD-ROM that came with the printer. (Available with models that include an
HP Jetdirect embedded print server.)
Accessory installation guides —Provides step-by-step instructions for installing accessories, such as an optional tray. A hard-copy guide is supplied with each accessory.
Using the printer
User guide —Contains detailed information for using the printer and for troubleshooting problems. This guide is available on the CD-ROM that came with the printer. It is also available through the HP Toolbox software.
Online Help —Contains information about the printer options that are available from within the printer drivers. To view a Help file, open the online Help through the printer driver.
HTML (online) user guide —Contains detailed information for using the printer and for
troubleshooting problems. Go to www.hp.com/support/lj2410 ,
http://www.hp.com/support/ lj2420 , or http://www.hp.com/support/lj2430 . After connecting, click Manuals .
Printer control-panel Help —This printer features a Help system at the control panel that provides instructions for resolving most printer errors. To view Help for a message (if available), press ( H
ELP
button).
2 Chapter 1 Printer basics ENWW
Printer configurations
NOTE
The HP LaserJet 2400 series printer is available in several configurations.The letters that follow the printer name indicate the differences between the configurations. Each letter refers to a specific feature. Use the information in this section to determine which features your model has.
Not all models are available in all configurations.
Feature designations for the HP LaserJet 2400 series printer
t d n
Letter no letter
Description
This is the base model.
Models with this designation include a duplexing unit for automatic two-sided printing.
Models with this designation include an embedded HP Jetdirect print server for connecting to a 10/100Base-T network.
Models with this designation include an additional paper tray.
ENWW Printer configurations 3
Printer features
The following tables describe the features for the HP LaserJet 2400 series printers.
Speed
HP LaserJet 2410 printer
Prints on letter-size paper at
25 pages per minute (ppm).
Prints on A4-size paper at
24 ppm.
HP LaserJet 2420 series printer
Prints on letter-size paper at
30 pages per minute (ppm).
Prints on A4-size paper at
28 ppm.
HP LaserJet 2430 series printer
Prints on letter-size paper at
35 pages per minute (ppm).
Prints on A4-size paper at
33 ppm.
Resolution
HP LaserJet 2410 printer
FastRes 1200—produces 1200dpi print quality for fast, highquality printing of business text and graphics.
ProRes 1200—produces 1200dpi printing for the best quality in line art and graphic images.
HP LaserJet print cartridges for crisp, sharp output.
HP LaserJet 2420 series printer
FastRes 1200—produces 1200dpi print quality for fast, highquality printing of business text and graphics.
ProRes 1200—produces 1200dpi printing for the best quality in line art and graphic images.
HP LaserJet print cartridges for crisp, sharp output.
HP LaserJet 2430 series printer
FastRes 1200—produces 1200dpi print quality for fast, highquality printing of business text and graphics.
ProRes 1200—produces 1200dpi printing for the best quality in line art and graphic images.
HP LaserJet print cartridges for crisp, sharp output.
Paper handling
HP LaserJet 2410 printer
Includes a 100-sheet manualfeed input tray and a 250-sheet input tray.
Compatible with an optional
500-sheet paper feeder.
HP LaserJet 2420 series printer
Includes a 100-sheet manualfeed input tray and a 250-sheet input tray.
Compatible with an optional
500-sheet paper feeder.
HP LaserJet 2420d and dn models include a duplexprinting accessory for automatic two-sided printing.
HP LaserJet 2430 series printer
Includes a 100-sheet manualfeed input tray and a 250-sheet input tray. The HP LaserJet
2430t, tn, and dtn models also include a 500-sheet input tray.
HP LaserJet 2430dtn model includes a duplex-printing accessory for automatic twosided printing.
4 Chapter 1 Printer basics ENWW
ENWW
Memory and processor
HP LaserJet 2410 printer
Includes 32 MB of randomaccess memory (RAM).
Expandable up to 288 MB maximum memory.
400-megahertz (MHz) processor speed.
HP LaserJet 2420 series printer
HP LaserJet 2420 printer includes 32 MB of randomaccess memory (RAM), expandable up to 288 MB maximum memory.
HP LaserJet 2420d printer includes 48 MB RAM, expandable up to 304 MB maximum memory.
HP LaserJet 2420n and dn models include 64 MB RAM, expandable up to 320 MB maximum memory.
400-megahertz (MHz) processor speed.
HP LaserJet 2430 series printer
HP LaserJet 2430t printer includes 48 MB of randomaccess memory (RAM), expandable up to 304 MB maximum memory.
HP LaserJet 2430n, tn, and dtn models include 64 MB RAM, expandable up to 320 MB maximum memory.
400-megahertz (MHz) processor speed.
Interface connections and networking
HP LaserJet 2410 printer
Includes a bidirectional, extended capabilities (ECP) type-B (IEEE 1284-compliant) parallel connection.
Includes a universal serial bus
(USB) 2.0 connection (full and high speed).
Includes one PCI-based enhanced input/output (EIO) expansion slot.
HP LaserJet 2420 series printer
Includes a bidirectional, ECP type-B (IEEE 1284-compliant) parallel connection.
Includes a USB 2.0 connection
(full and high speed).
Includes one PCI-based enhanced input/output (EIO) expansion slot.
HP LaserJet 2420n and dn models include an embedded
HP Jetdirect print server for connecting to a 10/100Base-TX network.
HP LaserJet 2430 series printer
Includes a bidirectional, ECP type-B (IEEE 1284-compliant) parallel connection.
Includes a USB 2.0 connection
(full and high speed).
Includes one PCI-based enhanced input/output (EIO) expansion slot.
HP LaserJet 2430n, tn, and dtn models include an embedded
HP Jetdirect print server for connecting to a 10/100Base-TX network.
Language and fonts
HP LaserJet 2410 printer
HP PCL6, PCL 5e, and
HP PostScript ® emulation.
(PS) 3
80 fonts for Microsoft ®
Windows ® .
Additional fonts can be added by installing a CompactFlash font card.
HP LaserJet 2420 series printer
HP PCL6, PCL 5e, and
HP PostScript ® (PS) 3 emulation.
80 fonts for Microsoft ®
Windows ® .
Additional fonts can be added by installing a CompactFlash font card.
HP LaserJet 2430 series printer
HP PCL6, PCL 5e, and
HP PostScript ® emulation.
(PS) 3
80 fonts for Microsoft ®
Windows ® .
Additional fonts can be added by installing a CompactFlash font card.
Printer features 5
Print cartridge
HP LaserJet 2410 printer
Standard print cartridge prints up to 6,000 pages.
HP smart printing supplies program automatically alerts when toner is low.
HP LaserJet 2420 series printer
Standard print cartridge prints up to 6,000 pages.
HP smart printing supplies program automatically alerts when toner is low.
HP LaserJet 2430 series printer
Standard print cartridge prints up to 6,000 pages.
HP smart printing supplies program automatically alerts when toner is low.
Energy savings
HP LaserJet 2410 printer
The printer automatically conserves electricity by reducing power consumption when it is not printing.
As an ENERGY STAR ® partner, Hewlett-Packard
Company has determined tha this product meets ENERGY
STAR ® guidelines for energy efficiency.
HP LaserJet 2420 series printer
The printer automatically conserves electricity by reducing power consumption when it is not printing.
As an ENERGY STAR ® partner, Hewlett-Packard
Company has determined tha this product meets ENERGY
STAR ® guidelines for energy efficiency.
HP LaserJet 2430 series printer
The printer automatically conserves electricity by reducing power consumption when it is not printing.
As an ENERGY STAR ® partner, Hewlett-Packard
Company has determined tha this product meets ENERGY
STAR ® guidelines for energy efficiency.
Economical printing
HP LaserJet 2410 printer
N-up printing (multiple pages on one sheet) saves paper.
Duplex printing (for models that include a duplex-printing accessory) saves paper.
Printing in EconoMode saves toner.
HP LaserJet 2420 series printer
N-up printing (multiple pages on one sheet) saves paper.
Duplex printing (for models that include a duplex-printing accessory) saves paper.
Printing in EconoMode saves toner.
HP LaserJet 2430 series printer
N-up printing (multiple pages on one sheet) saves paper.
Duplex printing (for models that include a duplex-printing accessory) saves paper.
Printing in EconoMode saves toner.
6 Chapter 1 Printer basics ENWW
Accessibility
HP LaserJet 2410 printer
The online user guide is compatible with text screenreaders.
The print cartridge can be inserted and removed by using one hand.
All doors and covers can be opened by using one hand.
The 250-sheet input tray is easy to open and close.
All media-width guides can be adjusted by using one hand.
HP LaserJet 2420 series printer
The online user guide is compatible with text screenreaders.
The print cartridge can be inserted and removed by using one hand.
All doors and covers can be opened by using one hand.
The 250-sheet input tray is easy to open and close.
All media-width guides can be adjusted by using one hand.
HP LaserJet 2430 series printer
The online user guide is compatible with text screenreaders.
The print cartridge can be inserted and removed by using one hand.
All doors and covers can be opened by using one hand.
The 250-sheet and 500-sheet input trays are easy to open and close.
All media-width guides can be adjusted by using one hand.
ENWW Printer features 7
Printer parts
Before using the printer, familiarize yourself with the parts of the printer.
1
2
3
4
7
6
5
1 Top output bin
2 Long-media extension
3 Latch to open the front cover (provides access to the print cartridge)
4 Tray 1 (pull to open)
5 Tray 2
6 Control panel
7 Right-side cover (provides access to DIMMs and CompactFlash cards)
10
8
8 On/off switch
9 Interface ports (see
10 Rear output bin (pull to open)
9
8 Chapter 1 Printer basics ENWW
Interface ports
The printer has four interface ports: one EIO slot and three ports for connecting to a computer or a network.
EIO
1
2
3
4
1 EIO slot
2 Embedded HP Jetdirect print server (HP LaserJet 2420n, 2420dn, 2430tn, and 2430dtn models only)
3 USB 2.0 connection
4 IEEE 1284B-compliant parallel connection
ENWW Printer parts 9
Control panel
This section provides information about the control panel and its features:
●
●
●
●
●
Changing printer-control-panel configuration settings
●
The control panel is located on the top of the printer.
?
Menu Stop
Ready Data Attention
See Interpreting control-panel messages to identify and troubleshoot control-panel messages.
Control-panel layout
1
2 ?
11
10
9
8
7
3
Menu Stop
Ready Data Attention
4 5 6
1 Graphical display
2 H
ELP
button
3 M
ENU
button
4 Ready light
5 Data light
6 Attention light
7 S
TOP
button
8 D
OWN
button
9 B
ACK
button
10 S
ELECT
button
11 U
P
button
10 Chapter 1 Printer basics ENWW
ENWW
Control-panel buttons
Button Function
● Provides information about the message on the graphical display. ( H
ELP
)
M
(
ENU
(
B
U
ACK
P
)
) ● Backs up one level in the menu tree or backs up one numeric entry.
● Exits menus if held down for more than 1 second.
● Enters and exits the menus.
● Navigates to the previous item in the list, or increases the value of items that are numerical in nature.
( S
ELECT
) ● Clears an error condition when the condition is clearable.
● Saves the selected value for an item.
● Performs the action that is associated with the item that is highlighted on the graphical display.
S
( D
TOP
OWN
) ● Navigates to the next item in the list, or decreases the value of items that are numerical in nature.
● Cancels the current print job in process and expels all of the active pages from the paper path. The time that it takes to cancel the job depends on the size of the print job. (Press the button only once.) Also clears continuable errors that are associated with the canceled job.
NOTE
The control panel lights cycle while the print job is cleared from both the printer and the computer, and then the printer returns to the ready state (Ready light on).
Control-panel lights
Light
Ready
State
On
Off
Blinking
Indication
The printer is online and ready to accept data to print.
The printer cannot accept data because it is offline (paused) or has experienced an error.
The printer is going offline. The printer stops processing the current print job and expels all of the active pages from the paper path.
Control panel 11
NOTE
Light
Data
Attention
State
On
Off
Blinking
On
Off
Blinking
Indication
The printer has data to print, but is waiting to receive all of the data.
The printer has no data to print.
The printer is processing or printing the data.
The printer has experienced a problem. Note the message on the control-panel display, and then turn the printer off and on.
See
Interpreting control-panel messages for help in resolving
problems.
The printer is functioning without error.
Action is required. See the control-panel display.
Printing control-panel menus
To see the current settings for the menus and items that are available at the control panel, print a control-panel menu map. You might want to store the menu map near the printer for reference.
For a complete list of the items that are available in the control-panel menus, see
.
To print a control-panel menu map
1. Press M
ENU
to open the menus.
2. Use ( U
P
button) or ( D
OWN
button) to scroll to INFORMATION , and then press
( S
ELECT
button).
3. Use ( U
P
button) or ( D
OWN
button) to scroll to PRINT MENU MAP , and then press
( S
ELECT
button).
Using the printer Help system
This printer features a Help system at the control panel that provides instructions for resolving most printer errors.
To view Help for a message (if available), press ( H
ELP
button). If the Help topic is longer than four lines, use the ( U
P
button) or ( D
OWN
button) to scroll through the entire topic.
To exit the Help system, press ( H
ELP
button) again.
12 Chapter 1 Printer basics ENWW
CAUTION
NOTE
Changing printer-control-panel configuration settings
By using the printer control panel, you can make changes to general printer configuration default settings such as tray size and type, sleep delay, printer personality (language), and jam recovery.
The printer-control-panel settings can also be changed from a computer by using the setting page of the embedded Web server. The computer shows the same information that the
control panel shows. For more information, see Using the embedded Web server
.
Configuration settings seldom need to be changed. Hewlett-Packard Company recommends that only the system administrator change configuration settings.
Changing control-panel settings
For a complete list of menu items and possible values, see
menu options appear only if the associated tray or accessory is installed. For example, the
EIO menu appears only if an EIO card is installed.
To change a control-panel setting
1. Press M
ENU
to open the menus.
2. Use ( U
P
button) or ( D
OWN
button) to scroll to the menu that you want, and then press
( S
ELECT
button).
3. Some menus might have several submenus. Use ( U
P
button) or ( D
OWN
button) to scroll to the submenu item that you want, and then press ( S
ELECT
button).
4. Use ( U
P
button) or ( D
OWN
button) to scroll to the setting, and then press ( S
ELECT button). Some settings change rapidly if ( U
P
button) or ( D
OWN
button) is held down.
An asterisk (*) appears next to the selection on the display, indicating that it is now the default.
5. Press M
ENU
to exit the menu.
Printer-driver settings override control-panel settings. Software program settings override both printer-driver settings and control-panel settings. If you cannot gain access to a menu or item, it is either not an option for the printer or you have not turned on the associated higher-level option. See your network administrator if a function has been locked ( Access denied menus locked appears on the printer control-panel display).
Show address
This item determines whether the printer's IP address appears on the display with the Ready message.
ENWW Control panel 13
To show the IP address
1. Press M
ENU
to open the menus.
2. Press ( D
OWN
button) to highlight CONFIGURE DEVICE .
3. Press ( S
ELECT
button) to select CONFIGURE DEVICE .
4. Press ( D
OWN
button) to highlight SYSTEM SETUP .
5. Press ( S
ELECT
button) to select SYSTEM SETUP .
6. Press ( D
OWN
button) to highlight SHOW ADDRESS .
7. Press ( S
ELECT
button) to select SHOW ADDRESS .
8. Press ( U
P
button) or ( D
OWN
button) to select the desired option.
9. Press ( S
ELECT
button) to select the option.
10. Press M
ENU
to exit the menu.
Tray behavior options
Four user-defined options are available for tray behavior:
● USE REQUESTED TRAY . Selecting EXCLUSIVELY ensures that the printer does not automatically select another tray when you indicate that a specific tray should be used.
Selecting FIRST allows the printer to pull from a second tray if the specified tray is empty. EXCLUSIVELY is the default setting.
● MANUALLY FEED PROMPT . If you select ALWAYS (the default value), the system always shows a prompt before pulling from the multipurpose tray. If you select UNLESS
LOADED , the system displays the prompt only if the multipurpose tray is empty.
● PS DEFER MEDIA . This setting affects how non-HP PostScript drivers behave with the printer. You do not need to change this setting if you use the drivers that HP supplies. If set to ENABLED , non-HP PostScript drivers use the same HP tray selection method as the HP drivers. If set to DISABLED , some non-HP PostScript drivers use the PostScript tray selection method instead of the HP method.
● SIZE/TYPE PROMPT . Use this item to control whether the tray configuration message and its corresponding prompts are shown whenever a tray is opened and closed. These prompts instruct you to change the type or size if the tray is configured for a different type or size than is loaded in the tray.
14 Chapter 1 Printer basics ENWW
ENWW
To set Use Requested Tray
1. Press M
ENU
to open the menus.
2. Press ( D
OWN
button) to highlight CONFIGURE DEVICE .
3. Press ( S
ELECT
button) to select CONFIGURE DEVICE .
4. Press ( D
OWN
button) to highlight SYSTEM SETUP .
5. Press ( S
ELECT
button) to select SYSTEM SETUP .
6. Press ( D
OWN
button) to highlight TRAY BEHAVIOR .
7. Press ( S
ELECT
button) to select TRAY BEHAVIOR .
8. Press ( S
ELECT
button) to select USE REQUESTED TRAY .
9. Press ( U
P
button) or ( D
OWN
button) to select EXCLUSIVELY or FIRST .
10. Press ( S
ELECT
button) to set the behavior.
11. Press M
ENU
to exit the menu.
To set Manually Feed Prompt
1. Press M
ENU
to open the menus.
2. Press ( D
OWN
button) to highlight CONFIGURE DEVICE .
3. Press ( S
ELECT
button) to select CONFIGURE DEVICE .
4. Press ( D
OWN
button) to highlight SYSTEM SETUP .
5. Press ( S
ELECT
button) to select SYSTEM SETUP .
6. Press ( D
OWN
button) to highlight TRAY BEHAVIOR .
7. Press ( S
ELECT
button) to select TRAY BEHAVIOR .
8. Press ( D
OWN
button) to highlight MANUALLY FEED PROMPT .
9. Press ( S
ELECT
button) to select MANUALLY FEED PROMPT .
10. Press ( U
P
button) or ( D
OWN
button) to select ALWAYS or UNLESS LOADED .
11. Press ( S
ELECT
button) to set the behavior.
12. Press M
ENU
to exit the menu.
Control panel 15
NOTE
To set the printer default for PS Defer Media
1. Press M
ENU
to open the menus.
2. Press ( D
OWN
button) to highlight CONFIGURE DEVICE .
3. Press ( S
ELECT
button) to select CONFIGURE DEVICE .
4. Press ( D
OWN
button) to highlight SYSTEM SETUP .
5. Press ( S
ELECT
button) to select SYSTEM SETUP .
6. Press ( D
OWN
button) to highlight TRAY BEHAVIOR .
7. Press ( S
ELECT
button) to select TRAY BEHAVIOR .
8. Press ( S
ELECT
button) to select PS DEFER MEDIA .
9. Press ( U
P
button) or ( D
OWN
button) to select ENABLED or DISABLED .
10. Press ( S
ELECT
button) to set the behavior.
11. Press M
ENU
to exit the menu.
To set Size/type prompt
1. Press M
ENU
to open the menus.
2. Press ( D
OWN
button) to highlight CONFIGURE DEVICE .
3. Press ( S
ELECT
button) to select CONFIGURE DEVICE .
4. Press ( D
OWN
button) to highlight SYSTEM SETUP .
5. Press ( S
ELECT
button) to select SYSTEM SETUP .
6. Press ( D
OWN
button) to highlight TRAY BEHAVIOR .
7. Press ( S
ELECT
button) to select TRAY BEHAVIOR .
8. Press ( S
ELECT
button) to select SIZE/TYPE PROMPT .
9. Press ( U
P
button) or ( D
OWN
button) to select DISPLAY or DO NOT DISPLAY .
10. Press ( S
ELECT
button) to set the behavior.
11. Press M
ENU
to exit the menu.
Sleep Delay
The adjustable Sleep Delay feature reduces power consumption when the printer has been inactive for an extended period. You can set the length of time before the printer goes into sleep mode to 1 MINUTE , 15 MINUTES , 30 MINUTES , or to 60 MINUTES , 90 MINUTES , 2
HOURS , or 4 HOURS . The default setting is 30 MINUTES .
The printer control-panel display dims when the printer is in sleep mode. Sleep mode does not affect printer warm-up time unless the printer was in sleep mode for more than 8 hours.
16 Chapter 1 Printer basics ENWW
ENWW
To set the Sleep Delay
1. Press M
ENU
to open the menus.
2. Press ( D
OWN
button) to highlight CONFIGURE DEVICE .
3. Press ( S
ELECT
button) to select CONFIGURE DEVICE .
4. Press ( D
OWN
button) to highlight SYSTEM SETUP .
5. Press ( S
ELECT
button) to select SYSTEM SETUP .
6. Press ( D
OWN
button) to highlight SLEEP DELAY .
7. Press ( S
ELECT
button) to select SLEEP DELAY .
8. Press ( U
P
button) or ( D
OWN
button) to select the appropriate time period.
9. Press ( S
ELECT
button) to set the time period.
10. Press M
ENU
to exit the menu.
To turn the Sleep Mode on or off
1. Press M
ENU
to open the menus.
2. Press ( D
OWN
button) to highlight CONFIGURE DEVICE .
3. Press ( S
ELECT
button) to select CONFIGURE DEVICE .
4. Press ( D
OWN
button) to highlight RESETS .
5. Press ( S
ELECT
button) to select RESETS .
6. Press ( D
OWN
button) to highlight SLEEP MODE .
7. Press ( S
ELECT
button) to select SLEEP MODE .
8. Press ( U
P
button) or ( D
OWN
button) to select ON or OFF .
9. Press ( S
ELECT
button) to set the selection.
10. Press M
ENU
to exit the menu.
Personality
This printer features automatic personality (printer language) switching.
● AUTO configures the printer to automatically detect the type of print job and configure its personality to accommodate that job. This is the default setting. Use this setting unless you are experiencing problems.
● PCL configures the printer to use Printer Control Language.
● PDF configures the printer to print .PDF files. (This option is only available the printer has sufficient memory.)
● PS configures the printer to use PostScript emulation.
Control panel 17
To set the personality
1. Press M
ENU
to open the menus.
2. Press ( D
OWN
button) to highlight CONFIGURE DEVICE .
3. Press ( S
ELECT
button) to select CONFIGURE DEVICE .
4. Press ( D
OWN
button) to highlight SYSTEM SETUP .
5. Press ( S
ELECT
button) to select SYSTEM SETUP .
6. Press ( D
OWN
button) to highlight PERSONALITY .
7. Press ( S
ELECT
button) to select PERSONALITY .
8. Press ( U
P
button) or ( D
OWN
button) to select the appropriate personality ( AUTO , PS ,
PCL , or PDF ).
9. Press ( S
ELECT
button) to set the personality.
10. Press M
ENU
to exit the menu.
Clearable warnings
You can determine the display time for control-panel clearable warnings with this option by selecting ON or JOB . The default value is JOB .
● Select ON to show clearable warnings until you press ( S
ELECT
button).
● Select JOB to show clearable warnings until the end of the job in which they were generated.
To set the clearable warnings
1. Press M
ENU
to open the menus.
2. Press ( D
OWN
button) to highlight CONFIGURE DEVICE .
3. Press ( S
ELECT
button) to select CONFIGURE DEVICE .
4. Press ( S
ELECT
button) to highlight SYSTEM SETUP .
5. Press ( S
ELECT
button) to select SYSTEM SETUP .
6. Press ( D
OWN
button) to highlight CLEARABLE WARNINGS .
7. Press ( S
ELECT
button) to select CLEARABLE WARNINGS .
8. Press ( U
P
button) or ( D
OWN
button) to select the appropriate setting.
9. Press ( S
ELECT
button) to set the selection.
10. Press M
ENU
to exit the menu.
Auto continue
You can determine printer behavior when the system generates an Auto Continuable error.
ON is the default setting.
● Select ON if you want an error message to appear for ten seconds before the printer automatically continues to print.
● Select OFF to pause printing any time an error message appears and until you press
( S
ELECT
button).
18 Chapter 1 Printer basics ENWW
ENWW
To set the auto continue
1. Press M
ENU
to open the menus.
2. Press ( D
OWN
button) to highlight CONFIGURE DEVICE .
3. Press ( S
ELECT
button) to select CONFIGURE DEVICE .
4. Press ( D
OWN
button) to highlight SYSTEM SETUP .
5. Press ( S
ELECT
button) to select SYSTEM SETUP .
6. Press ( D
OWN
button) to highlight AUTO CONTINUE .
7. Press ( S
ELECT
button) to select AUTO CONTINUE .
8. Press ( U
P
button) or ( D
OWN
button) to select the appropriate setting.
9. Press ( S
ELECT
button) to set the selection.
10. Press M
ENU
to exit the menu.
Cartridge low
The printer has two options for reporting that print cartridge life is low: CONTINUE is the default value.
● Select CONTINUE to allow the printer to continue printing while a warning appears and until the print cartridge is replaced.
● Select STOP if you want the printer to pause printing until you replace the used print cartridge or press ( S
ELECT
button), which allows the printer to print while the warning appears.
To set supplies-low reporting
1. Press M
ENU
to open the menus.
2. Press ( D
OWN
button) to highlight CONFIGURE DEVICE .
3. Press ( S
ELECT
button) to select CONFIGURE DEVICE .
4. Press ( D
OWN
button) to highlight SYSTEM SETUP .
5. Press ( S
ELECT
button) to select SYSTEM SETUP .
6. Press ( D
OWN
button) to highlight CARTRIDGE LOW .
7. Press ( S
ELECT
button) to select CARTRIDGE LOW .
8. Press ( U
P
button) or ( D
OWN
button) to select the appropriate setting.
9. Press ( S
ELECT
button) to set the selection.
10. Press M
ENU
to exit the menu.
Control panel 19
Cartridge out
The printer has two options for this menu item.
● Select CONTINUE to allow the printer to continue printing. A REPLACE CARTRIDGE warning message appears until the print cartridge is replaced. Printing in this mode can continue only for a specific number of pages. After that, the printer stops printing until you replace the empty print cartridge. This is the default setting.
● Select STOP if you want the printer to stop printing until the empty print cartridge is replaced.
To set the cartridge-out response
1. Press M
ENU
to open the menus.
2. Press ( D
OWN
button) to highlight CONFIGURE DEVICE .
3. Press ( S
ELECT
button) to select CONFIGURE DEVICE .
4. Press ( D
OWN
button) to highlight SYSTEM SETUP .
5. Press ( S
ELECT
button) to select SYSTEM SETUP .
6. Press ( D
OWN
button) to highlight CARTRIDGE OUT .
7. Press ( S
ELECT
button) to select CARTRIDGE OUT .
8. Press ( U
P
button) or ( D
OWN
button) to select the appropriate setting.
9. Press ( S
ELECT
button) to set the selection.
10. Press M
ENU
to exit the menu.
Jam recovery
Use this option to configure the printer response to jams, including how the printer handles the pages involved. AUTO is the default value.
● AUTO . The printer automatically turns jam recovery on when sufficient memory is available.
● ON . The printer reprints any page that is involved in a jam. Additional memory is allocated to store the last few pages that were printed, and this might cause overall printer performance to suffer.
● OFF . The printer does not reprint any page that was involved in a jam. Because no memory is used to store the most recent pages, overall printer performance might be optimized.
20 Chapter 1 Printer basics ENWW
ENWW
To set the jam-recovery response
1. Press M
ENU
to open the menus.
2. Press ( D
OWN
button) to highlight CONFIGURE DEVICE .
3. Press ( S
ELECT
button) to select CONFIGURE DEVICE .
4. Press ( D
OWN
button) to highlight SYSTEM SETUP .
5. Press ( S
ELECT
button) to select SYSTEM SETUP .
6. Press ( D
OWN
button) to highlight JAM RECOVERY .
7. Press ( S
ELECT
button) to select JAM RECOVERY .
8. Press ( U
P
button) or ( D
OWN
button) to select the appropriate setting.
9. Press ( S
ELECT
button) to set the selection.
10. Press M
ENU
to exit the menu.
RAM disk
This option determines how the RAM disk feature is configured. This option is only available if the printer has at least 8 MB of free memory. The default is AUTO .
● AUTO . The printer determines the optimal RAM disk size based on the amount of available memory.
● OFF . The RAM disk is disabled, but a minimal RAM disk is still active (sufficient to scan one page).
To set the RAM disk
1. Press M
ENU
to open the menus.
2. Press ( D
OWN
button) to highlight CONFIGURE DEVICE .
3. Press ( S
ELECT
button) to select CONFIGURE DEVICE .
4. Press ( D
OWN
button) to highlight SYSTEM SETUP .
5. Press ( S
ELECT
button) to select SYSTEM SETUP .
6. Press ( D
OWN
button) to highlight RAM DISK .
7. Press ( S
ELECT
button) to select RAM DISK .
8. Press ( U
P
button) or ( D
OWN
button) to select the appropriate setting.
9. Press ( S
ELECT
button) to set the selection.
10. Press M
ENU
to exit the menu.
Language
If LANGUAGE appears in English on the control panel, use the following procedure.
Otherwise, turn the printer off and then on again. When XXX MB appears, press and hold
( S
ELECT
button). When all three control panel lights are lit, release ( S
ELECT
button) and use the following procedure to set the language.
Control panel 21
To select the language
1. When SELECT LANGUAGE appears in English, press ( S
ELECT
button), and wait until
LANGUAGE appears in English.
2. Press ( D
OWN
button) until the preferred language appears.
3. Press ( S
ELECT
button) to save the preferred language.
22 Chapter 1 Printer basics ENWW
Software
The printer comes with helpful software, including printer drivers and optional software. For easy printer setup and access to the full range of printer features, HP recommends that you install the software that is provided.
Check the installation notes and Readme files on the printer CD-ROM for additional software and languages. HP software is not available in all languages.
Operating systems and printer components
The printer CD-ROM contains the software components and drivers for users and network administrators. The printer drivers that are provided on the CD-ROM must be installed in order to take full advantage of printer features. The other programs are recommended, but are not required for operation. Check the installation notes and Readme files on the printer
CD-ROM for more information.
The CD-ROM includes software that is designed for users and network administrators who are operating in the following environments:
● Microsoft ® Windows ® 98 and Windows Millennium Edition (Me)
● Microsoft Windows NT ® 4.0 (parallel and network connections only)
● Microsoft Windows 2000, Windows XP, and Windows Server 2003
● Apple Mac OS version 9.1 and later, and OS X version 10.1 or later
The most recent printer drivers for all supported operating systems are available at http://www.hp.com/go/lj2410_software , http://www.hp.com/go/lj2420_software , or http://www.hp.com/go/lj2430_software . If you do not have access to the Internet, see the support flyer that came in the printer box for information about obtaining the most recent software.
The following table lists the available software for the printer.
Software
Windows Installer
PCL 6
PCL 5
PostScript emulation
HP Web Jetadmin*
Macintosh Installer
Macintosh PostScript
Printer Description
(PPD) files
IBM drivers* x x x x
Windows
98/Me x x x x x
Windows
NT 4.0
x x x x x
Windows
2000/XP/
Server
2003
Mac OS x x
UNIX ® /
Linux x
OS/2 x
ENWW Software 23
NOTE
NOTE
Software Windows
98/Me
Windows
NT 4.0
Windows
2000/XP/
Server
2003
Mac OS
Model scripts*
*Available only on the World Wide Web.
UNIX ® /
Linux x
OS/2
Printer drivers
Printer drivers provide access to the printer features and allow the computer to communicate with the printer (by using a printer language). Check the install notes, Readme, and latebreaking Readme files on the printer CD-ROM for additional software and languages.
The following printer drivers are included with the printer. The most recent drivers are available at http://www.hp.com/go/lj2410_software , http://www.hp.com/go/lj2420_software , or http://www.hp.com/go/lj2430_software . Depending on the configuration of Windowsbased computers, the installation program for the printer software automatically checks the computer for Internet access to obtain the latest drivers.
Operating system 1
Windows 98, Me
Windows NT 4.0
PCL 6 x x
Windows 2000, XP, Server 2003 x
PCL 5 x x x
PS x x x
PPD 2 x x x
Macintosh OS x x
1 Not all printer features are available from all drivers or operating systems. See the contextsensitive help in the printer driver for available features.
2 PostScript (PS) Printer Description files (PPDs)
If your system did not automatically check the Internet for the latest drivers during software installation, download them from http://www.hp.com/go/lj2410_software , http://www.hp.com/ go/lj2420_software , or http://www.hp.com/go/lj2430_software . After you are connected, click
Downloads and Drivers to find the driver that you want to download.
You can obtain Model Scripts for UNIX and Linux by downloading them from the Internet or by requesting them from an HP-authorized service or support provider. For Linux support see http://www.hp.com/go/linux . For UNIX support see http://www.hp.com/go/ jetdirectunix_software . For additional information see the support flyer that came in the printer box.
If the printer driver that you want is not on the printer CD-ROM or is not listed here, check the install notes, Readme, and late-breaking Readme files to see if the printer driver is supported. If it is not supported, contact the manufacturer or distributor of the program that you are using and request a driver for the printer.
Additional drivers
The following drivers are not included on the CD-ROM, but are available from the Internet.
● OS/2 PCL 5 or PCL 6 printer driver.
● OS/2 PS printer driver.
24 Chapter 1 Printer basics ENWW
NOTE
NOTE
ENWW
● UNIX model scripts.
● Linux drivers.
● HP OpenVMS drivers.
The OS/2 drivers are available from IBM and are packaged with OS/2. They are not available for Simplified Chinese, Korean, Japanese, or Traditional Chinese.
Select the correct printer driver for your needs
Select a printer driver based on the way that you use the printer. Certain printer features are available only in the PCL 6 drivers. See the printer driver Help for available features.
● Use the PCL 6 driver to take full advantage of printer features. For general office printing, the PCL 6 driver is recommended to provide optimum performance and print quality.
● Use the PCL 5 driver if backward compatibility with previous PCL printer drivers or older printers is necessary.
● Use the PS driver if you are printing primarily from PostScript-specific programs such as
Adobe ® and Corel, for compatibility with PostScript Level 3 needs, or for PS
CompactFlash font support.
The printer automatically switches between PS and PCL printer languages.
Printer driver Help
Each printer driver has Help screens that can be activated by using the Help button, the F1 button on the computer keyboard, or a question-mark symbol in the upper-right corner of the printer driver (depending on the Windows operating system that you are using). You can also open printer-driver Help by right-clicking any item in the driver, and then clicking What's
This?
These Help screens give detailed information about the specific driver. Printer driver
Help is separate from your program Help.
Using the printer drivers
Use one of the following methods to open the printer drivers from your computer:
Operating
System
Windows 98, NT
4.0, and ME
To change the settings for all print jobs until the software program is closed
To change the print job default settings
(for example, turn on
Print on Both Sides by default)
On the File
.
The steps can vary; this procedure is most common.
menu in the software program, click
Print . Select the printer, and then click
Properties
Click Start
Settings
Printers select
, click
, and then click
. Right-click the printer icon, and then
Properties
(Windows 98 and ME) or Document Defaults
(Windows NT 4.0).
To change the configuration settings
(for example, add a physical option such as a tray or enable/ disable a driver feature such as Allow Manual
Duplexing)
Click Start , click
Settings , and then click
Printers . Right-click the printer icon, and then select Properties . Click the Configure tab.
Software 25
Operating
System
Windows 2000,
XP, and Server
2003
Macintosh OS
V9.1
Macintosh OS X
V10.1
Macintosh OS X
V10.2
To change the settings for all print jobs until the software program is closed
To change the print job default settings
(for example, turn on
Print on Both Sides by default)
On the
On the
File menu, click
. Change the settings that you want on the various pop-up menus.
File menu in the software program, click
Print . Select the printer, and then click
Properties or
Preferences .
The steps can vary; this procedure is most common.
On the File menu, click
Print . Change the settings that you want on the various pop-up menus.
On the File menu, click
Print . Change the settings that you want on the various pop-up menus.
Click Start , click
Settings , and then click
Printers or Printers and Faxes . Right-click the printer icon, and then select Printing
Preferences .
On the File menu, click
Print . As you change settings on the pop-up menu, click Save
Settings .
On the File menu, click
Print . Change the settings that you want on the various pop-up menus, and then on the main pop-up menu, click
Save Custom Setting .
These settings are saved as the Custom option. To use the new settings, you must select the Custom option every time that you open a program and print.
On the File menu, click
Print . Change the settings that you want on the various pop-up menus, and then, on the
Presets pop-up menu, click Save as and type a name for the preset.
These settings are saved in the Presets menu. To use the new settings, you must select the saved preset option every time you open a program and print.
To change the configuration settings
(for example, add a physical option such as a tray or enable/ disable a driver feature such as Allow Manual
Duplexing)
Click Start , click
Settings , and then click
Printers or Printers and Faxes . Right-click the printer icon, and then select Properties .
Click the Device
Settings tab.
Click the desktop printer icon. From the Printing menu, click Change
Setup .
Delete the printer and reinstall it. The driver will be auto-configured with the new options when it is reinstalled.
NOTE
Use this procedure for
AppleTalk connections only. Configuration settings might not be available in Classic mode.
Open Print Center by selecting the hard drive, clicking Applications , clicking Utilities , then double-clicking Print
Center . Click on the print queue. On the
Printers menu, click
Show Info . Click the
Installable Options menu.
NOTE
Configuration settings might not be available in
Classic mode.
26 Chapter 1 Printer basics ENWW
NOTE
Operating
System
Macintosh OS X
V10.3
To change the settings for all print jobs until the software program is closed
On the File menu, click
Print . Change the settings that you want on the various pop-up menus.
To change the print job default settings
(for example, turn on
Print on Both Sides by default)
On the File menu, click
Print . Change the settings that you want on the various pop-up menus, and then, on the
Presets pop-up menu, click Save as and type a name for the preset.
These settings are saved in the Presets menu. To use the new settings, you must select the saved preset option every time that you open a program and print.
To change the configuration settings
(for example, add a physical option such as a tray or enable/ disable a driver feature such as Allow Manual
Duplexing)
Open Printer Setup
Utility by select ing the hard drive, clicking
Applications , clicking
Utilities , then doubleclicking Printer Setup
Utility . Click on the print queue. On the Printers menu, click Show Info .
Click the Installable
Options menu.
Software for Macintosh computers
The HP installer provides PostScript Printer Description (PPD) files, Printer Dialog
Extensions (PDEs), and the HP LaserJet Utility for use with Macintosh computers.
The embedded Web server can be used with Macintosh computers if the printer is connected to a network. See
Using the embedded Web server for more information.
PPDs
Use PPDs in combination with the Apple PostScript drivers to gain access to the printer features and to allow the computer to communicate with the printer. An installation program for the PPDs, PDEs, and other software is provided on the CD-ROM. Use the appropriate
PS driver that comes with the operating system.
HP LaserJet Utility
Use the HP LaserJet Utility to control features that are not available in the driver. The illustrated screens make selecting printer features easy. Use the HP LaserJet Utility to perform the following tasks:
● Name the printer, assign it to a zone on the network, and download files and fonts.
● Configure and set the printer for Internet protocol (IP) printing.
The HP LaserJet Utility is not currently supported for OS X, but the utility is supported for the
Classic environment.
ENWW Software 27
NOTE
CAUTION
NOTE
Installing the printing system software
The printer comes with printing system software and printer drivers on a CD-ROM. The printing system software on the CD-ROM must be installed in order to take full advantage of the printer features.
If you do not have access to a CD-ROM drive, you can download the printing system software from the Internet at http://www.hp.com/go/lj2410_software , http://www.hp.com/go/ lj2420_software , or http://www.hp.com/go/lj2430_software .
Sample model scripts for UNIX (HP-UX ® , Sun Solaris) and Linux networks are available for download from the World Wide Web. For Linux support see http://www.hp.com/go/linux . For
UNIX support see http://www.hp.com/go/jetdirectunix_software .
You can download the latest software free of charge at http://www.hp.com/go/ lj2410_software , http://www.hp.com/go/lj2420_software , or http://www.hp.com/go/ lj2430_software .
After you have followed the installation instructions and loaded the software, see
Using printer-driver features to get the most out of your printer.
Printer driver Help
Each printer driver has Help screens that can be activated by using either the Help button, the F1 button on the computer keyboard, or a question-mark symbol in the upper-right corner of the printer driver (depending on the Windows operating system that you are using).
These Help screens give detailed information about the specific driver. Printer driver Help is separate from your program Help.
Installing Windows printing system software for direct connections
This section explains how to install the printing system software for Microsoft Windows 98,
Windows Me, Windows NT 4.0, Windows 2000, Windows XP, and Windows Server 2003.
When installing the printing software in a direct-connect environment, always install the software before connecting the parallel or USB cable. If the parallel or USB cable was connected before the software installation, see
Installing the software after the parallel or
USB cable has been connected .
Either a parallel or USB cable can be used for the direct connection. Use an IEEE 1284compatible cable or a standard 2-meter USB cable.
Do not connect parallel and USB cables at the same time.
Windows NT 4.0 does not support USB cable connections.
To install the printing system software
1. Close all software programs that are open or running.
2. Insert the printer CD-ROM into the CD-ROM drive.
If the welcome screen does not open, start it by using the following procedure:
1. On the Start menu, click Run .
2. Type the following (where X is the letter of the CD-ROM drive):
X:\setup
3. Click OK .
28 Chapter 1 Printer basics ENWW
NOTE
3. When prompted, click Install Printer and follow the instructions on the computer screen.
4. Click Finish when the installation has completed.
5. Restart the computer.
6. Print a page from any software program to make sure that the software is correctly installed.
If installation fails, reinstall the software. If this fails, check the installation notes and Readme files on the printer CD-ROM or the flyer that came in the printer box, or go to http://www.hp.com/go/lj2410_software , http://www.hp.com/go/lj2420_software , or http://www.hp.com/go/lj2430_software for help or more information.
Installing Windows printing system software for networks
The software on the printer CD-ROM supports network installation with a Microsoft network
(except Windows 3.1
x ). For network installation on other operating systems, go to http://www.hp.com/go/lj2410_software , http://www.hp.com/go/lj2420_software , or http://www.hp.com/go/lj2430_software .
Windows NT 4.0 drivers must be installed through the Windows Add-Printer Wizard.
The HP Jetdirect print server that is included with printer models that feature the letter "n" in the model name has a 10/100Base-TX network port. For other options, see
Ordering parts, accessories, and supplies or contact your local HP dealer. See
The installer does not support printer installation or printer object creation on Novell servers.
It supports only direct-mode network installations between Windows computers and a printer. To install your printer and create objects on a Novell server, use an HP utility, such as HP Web Jetadmin, or a Novell utility, such as NWadmin.
To install the printing system software
1. If you are installing the software on Windows NT 4.0, Windows 2000, Windows XP, or
Windows Server 2003 make sure that you have administrator privileges.
Print a configuration page to make sure that the HP Jetdirect print server is configured correctly for the network. See
. On the second page, locate the printer IP address. You might need this address to complete network installation.
2. Close all software programs that are open or running.
3. Insert the printer CD-ROM into the CD-ROM drive.
4. If the welcome screen does not open, start it by using the following procedure:
1. On the Start menu, click Run .
2. Type the following (where X is the letter of the CD-ROM drive):
X:\setup
3. Click OK .
5. When prompted, click Install Printer and follow the instructions on the computer screen.
6. Click Finish when the installation is complete.
7. Restart the computer.
8. Print a page from any software program to make sure that the software is correctly installed.
ENWW Software 29
If installation fails, reinstall the software. If this fails, check the installation notes and Readme files on the printer CD-ROM or the flyer that came in the printer box, or go to http://www.hp.com/go/lj2410_software , http://www.hp.com/go/lj2420_software , or http://www.hp.com/go/lj2430_software for help or more information.
To set up a Windows computer to use the network printer with Windows-sharing
You can share the printer on the network so that other network users can print to it.
See your Windows documentation to set up Windows-sharing. After the printer is shared, install the printer software on all computers that share the printer.
Installing Macintosh printing system software for networks
This section describes how to install Macintosh printing system software. The printing system software supports Apple Mac OS 9.
x and later and OS X V10.1 and later.
The printing system software includes the following components:
● PostScript Printer Description files . The PostScript (PS) Printer Description files
(PPDs), in combination with the Apple LaserWriter 8 printer driver, provide access to the printer features and allow the computer to communicate with the printer. An installation program for the PPDs and other software is provided on the CD-ROM that came with the printer. In addition, use the Apple LaserWriter 8 printer driver that comes with the computer.
● HP LaserJet Utility . The HP LaserJet Utility provides access to features that are not available in the printer driver. Use the illustrated screens to select printer features and complete tasks with the printer:
– Name the printer, assign it to a zone on the network, download files and fonts, and change many of the printer settings.
– Set a password for the printer.
– Check the levels of printer consumables.
– Configure and set the printer for Internet Protocol (IP) or AppleTalk printing.
To install printer drivers in Mac OS 9.x
1. Connect the network cable between the HP Jetdirect print server and a network port.
2. Insert the CD-ROM into the CD-ROM drive. The CD-ROM menu runs automatically. If the CD-ROM menu does not run automatically, double-click the CD-ROM icon on the desktop, and then double-click the Installer icon. This icon is located in the Installer/
<language> folder of the Starter CD-ROM, where <language> is your language preference. For example, the Installer/English folder contains the Installer icon for the
English printer software.
3. Follow the instructions on the screen.
4. From HD , click Applications , click Utilities , and then open the Apple Desktop Printer
Utility.
5. Double click Printer (AppleTalk) .
6. Next to AppleTalk Printer Selection, click Change .
7. Select the printer, click Auto Setup , and then click Create .
8. On the Printing menu, click Set Default Printer .
30 Chapter 1 Printer basics ENWW
NOTE
NOTE
NOTE
NOTE
ENWW
To install printer drivers in Mac OS X V10.1 and later
1. Connect the network cable between the HP Jetdirect print server and a network port.
2. Insert the CD-ROM into the CD-ROM drive. The CD-ROM menu runs automatically. If the CD-ROM menu does not run automatically, double-click the CD-ROM icon on the desktop, and then double-click the Installer icon. This icon is located in the Installer/
<language> folder of the Starter CD-ROM, where <language> is your language preference. For example, the Installer/English folder contains the Installer icon for the
English printer software.
3. Double-click the HP LaserJet Installers folder.
4. Follow the instructions on the computer screen.
5. Double-click the Installer icon for the appropriate language.
If OS X and OS 9.x (Classic) are installed on the same computer, the installer will show both the Classic and the OS X installation options.
6. On your computer hard drive, double-click Applications , double-click Utilities , and then double-click Print Center or Print Setup Utility .
If you are using OS X V10.3, "Print Setup Utility" has replaced "Print Center".
7. Click Add Printer .
8. Select your connection type.
9. Select the printer name.
10. Click Add Printer .
11. Close the Print Center or the Print Setup Utility by clicking the close button in the upperleft corner.
Macintosh computers cannot be connected directly to the printer with a parallel port.
Installing Macintosh printing system software for direct connections
Macintosh computers do not support parallel port connections.
This section explains how to install the printing system software for OS 9.
x and later and
OS X V10.1 and later.
The Apple LaserWriter driver must be installed in order to use the PPD files. Use the Apple
LaserWriter 8 driver that came with your Macintosh computer.
To install the printing system software
1. Connect a USB cable between the USB port on the printer and the USB port on the computer. Use a standard 2-meter USB cable.
2. Close all software programs that are open or running.
3. Insert the printer CD-ROM into the CD-ROM drive and run the installer.
The CD-ROM menu runs automatically. If the CD-ROM menu does not run automatically, double-click the CD-ROM icon on the desktop, and then double-click the
Installer icon. This icon is located in the Installer/<language> folder of the Starter CD-
ROM, where <language> is your language preference.
4. Follow the instructions on the computer screen.
Software 31
5. Restart the computer.
6.
For Mac OS 9.x
:
1. From HD , click Applications , click Utilities , and then open the Apple Desktop
Printer Utility.
2. Double-click Printer (USB) , and then click OK .
3. Next to USB Printer Selection , click Change .
4. Select the printer, and then click OK .
5. Next to Postscript Printer Description (PPD) File , click Auto Setup , and then click
Create .
6. On the Printing menu, click Set Default Printer .
For Mac OS X:
1. From HD , click Applications , then click Utilities , and then click Print Center or
Printer Setup Utility to start the Print Center or Printer Setup Utility.
2. If the printer appears in the Printer list, delete the printer.
3. Click Add .
4. On the drop-down menu at the top, click USB .
5. In the Printer Model List , click HP .
6. Under Model Name , click HP LaserJet 2400 series , and then click Add .
7. Print a page from any software program to make sure that the software is correctly installed.
If installation fails, reinstall the software. If this fails, see the installation notes or Readme files on the printer CD-ROM or the flyer that came in the printer box, or go to http://www.hp.com/go/lj2410_software , http://www.hp.com/go/lj2420_software , or http://www.hp.com/go/lj2430_software for help or more information.
Installing the software after the parallel or USB cable has been connected
If you have already connected a parallel or USB cable to a Windows computer, the New
Hardware Found dialog box appears when you turn on the computer.
To install the software for Windows 98 or Windows Me
1. In the New Hardware Found dialog box, click Search CD-ROM drive .
2. Click Next .
3. Follow the instructions on the computer screen.
4. Print a page from any software program to make sure that the printer software is correctly installed.
If installation fails, reinstall the software. If this fails, check the installation notes and Readme files on the printer CD-ROM or the flyer that came in the printer box, or go to http://www.hp.com/go/lj2410_software , http://www.hp.com/go/lj2420_software , or http://www.hp.com/go/lj2430_software for help or more information.
To install the software for Windows 2000, Windows XP, or Windows Server 2003
1. In the New Hardware Found dialog box, click Search .
32 Chapter 1 Printer basics ENWW
ENWW
2. On the Locate Driver Files screen, select the Specify a Location check box, clear all other check boxes, and then click Next .
3. Type the following text, where X is the letter of the CD-ROM drive:
X:\2000XP
4. Click Next .
5. Follow the instructions on the computer screen.
6. Click Finish when installation is complete.
7. Select a language and follow the instructions on the computer screen.
8. Print a page from any software program to make sure that the software is correctly installed.
If installation fails, reinstall the software. If this fails, check the installation notes and Readme files on the printer CD-ROM or the flyer that came in the printer box, or go to http://www.hp.com/go/lj2410_software , http://www.hp.com/go/lj2420_software , or http://www.hp.com/go/lj2430_software for help or more information.
Uninstalling the software
This section explains how to uninstall the printing system software.
To remove software from Windows operating systems
Use the Uninstaller to select and remove any or all of the Windows HP printing-system components.
1. Click Start and then point to Programs .
2. Point to HP LaserJet 2400 series , and then click Uninstaller .
3. Click Next .
4. Select the HP printing-system components that you want to uninstall.
5. Click OK .
6. Follow the instructions on the computer screen to complete the uninstallation.
To remove software from Macintosh operating systems
Drag the HP LaserJet folder and PPDs to the trash can:
● For Mac OS 9 , the folders are in hard drive/HP LaserJet and in hard drive/system folder/ extensions/printer descriptions.
● For Mac OS X , the folders are in hard drive/Library/Printers/PPDs/Contents/Resources/
EN.lproj.
Software 33
Selecting print media
NOTE
CAUTION
This printer accepts a variety of media, such as cut-sheet paper, including up to 100% recycled fiber content paper; envelopes; labels; transparencies; and custom-size paper.
Properties such as weight, composition, grain, and moisture content are important factors that affect printer performance and output quality. Paper that does not meet the guidelines that are outlined in this manual can cause the following problems:
● Poor print quality
● Increased jams
● Premature wear on the printer, requiring repair
Some paper might meet all of the guidelines in this manual and still not produce satisfactory results. This might be the result of improper handling, unacceptable temperature and humidity levels, or other variables over which Hewlett-Packard has no control. Before purchasing large quantities of media, make sure that it meets the requirements that are specified in this User guide and in the HP LaserJet Printer Family Print Media Guide , which is available for download at http://www.hp.com/support/ljpaperguide . Always test paper before buying large quantities.
Using media that does not meet HP specifications can cause problems for the printer, requiring repair. This repair is not covered by the HP warranty or service agreements.
Supported types and sizes of print media
Tray 1 Dimensions 1
Minimum size (custom) 76 x 127 mm
(3 x 5 inches)
Maximum size (custom) 216 x 356 mm
(8.5 x 14 inches)
Transparency Same as minimum and maximum paper sizes listed above.
Labels 3
Weight
60 to 199 g/m 2
(16 to 53 lb)
Thickness: 0.10 to 0.14 mm (0.0039 to
0.0055 inch)
Thickness:
0.10 to 0.14 mm
(0.0039 to 0.005 inch)
Capacity 2
100 sheets of 75 g/m 2
(20 lb) paper
75 typical
50 typical
Envelopes Up to 90 g/m 2
(16 to 24 lb)
Up to 10
1 The printer supports a wide range of sizes. See the printer software for supported sizes. To print on custom-size paper see
Printing on custom-sized media or cardstock .
2 Capacity can vary depending on media weight and thickness, as well as environmental conditions.
3 Smoothness: 100 to 250 (Sheffield).
34 Chapter 1 Printer basics ENWW
NOTE
ENWW
You might experience some jams when using any media that is less than 178 mm (7 inches) long. These jams might be caused by paper that has been affected by environmental conditions. For optimum performance, make sure that you are storing and handling the media correctly (see
Printing and paper storage environment
).
Tray 2 (250-sheet tray) and tray 3 (500-sheet tray)
Letter
Dimensions 1 Weight Capacity 2
A4
Executive
Legal
B5 (JIS)
A5
216 x 279 mm
(8.5 x 11 inches)
210 x 297 mm
(8.3 x 11.7 inches)
191 x 267 mm
(7.3 x 10.5 inches)
216 x 356 mm
(8.5 x 14 inches)
182 x 257 mm
(7.2 x 10 inches)
148 x 210 mm
(5.8 x 8.3 inches)
60 to 120 g/m 2
(16 to 32 lb)
250 sheets of 75 g/m 2
(20 lb) paper
8.5 x 13 inches 216 x 330 mm
(8.5 x 13 inches)
1 The printer supports a wide range of sizes. See the printer software for supported sizes. To print on custom-size paper see
Printing on custom-sized media or cardstock .
2 Capacity can vary depending on media weight and thickness, as well as environmental conditions.
Built-in duplexer 1
Letter
A4
Legal
Dimensions 2
216 x 279 mm
(8.5 x 11 inches)
210 x 297 mm
(8.3 x 11.7 inches)
216 x 356 mm
(8.5 x 14 inches)
Weight
60 to 105 g/m 2
(16 to 28 lb Bond)
8.5 x 13 inches 216 x 330 mm
(8.5 x 13 inches)
1 The built-in duplexer is included only with the HP LaserJet 2420d, 2420dn, and 2430dtn printers.
2 The printer supports a wide range of sizes. See the printer software for supported sizes. To print on custom-size paper see
Printing on custom-sized media or cardstock .
Selecting print media 35
For more information about using print media, see
36 Chapter 1 Printer basics ENWW
2
Printing tasks
This section provides information about common printing tasks.
●
Selecting which tray is used for printing
●
Selecting the correct fuser mode
●
●
Understanding media output options
●
●
●
Printing on both sides (duplexing)
●
●
●
●
ENWW 37
Selecting which tray is used for printing
You can select how the printer pulls media from the trays. The following sections provide information about configuring the printer to pull media from specific trays.
Printing by type and size of media (locking trays)
Manually feeding media from tray 1
NOTE
Understanding tray order
When the printer receives a print job, it selects the tray by trying to match the requested paper type and size with what has been loaded in the trays. Using an "autoselect" process, it searches all available trays for the paper that satisfies the request, starting with the bottom tray and ending with the top tray (tray 1). The printer begins printing the job as soon as it finds the correct type and size.
The "autoselect" process occurs only if no specific tray is requested for the job. If a specific tray is requested, the job prints from the requested tray.
● If media is loaded in tray 1 and tray 1 is set TRAY 1 TYPE=ANY and TRAY 1
SIZE=ANY on the PAPER HANDLING menu, the printer will always pull media from tray 1 first. See
for more information.
● If the search fails, a message appears on the printer control-panel display requesting that you load the correct media type and size. You can load that media type and size, or you can override the request by selecting a different type and size at the printer control panel.
● If a tray runs out of media during a print job, the printer automatically switches to any tray that contains the same media type and size.
The autoselect process changes somewhat if you customize tray 1 operation (as explained in
Customizing tray 1 operation ) or if you set tray 1 for manual feed (as explained in
Manually feeding media from tray 1 ).
Customizing tray 1 operation
The printer can be set to print from tray 1 if it is loaded, or to print only from tray 1 if the type
of media that is loaded is specifically requested. See Paper Handling menu .
Setting
TRAY 1 TYPE=ANY
TRAY 1 SIZE=ANY
Explanation
The printer usually pulls media from tray 1 first unless it is empty or closed. If you do not keep media in tray 1 all the time, or if you use tray 1 only to manually feed media, keep the default setting of TRAY 1 TYPE=ANY and TRAY 1
SIZE=ANY on the Paper Handling menu.
38 Chapter 2 Printing tasks ENWW
NOTE
Setting
TRAY 1 TYPE= or TRAY 1 SIZE= a type other than ANY
Explanation
The printer treats tray 1 like the other trays.
Instead of looking for media in tray 1 first, the printer pulls media from the tray that matches type and size settings that are selected in the software.
In the printer driver, you can select media from any tray (including tray 1) by type, size, or source. To print by type and size of paper, see
Printing by type and size of media (locking trays) .
You can also determine whether the printer shows a prompt to ask if it can pull media from tray 1 if it cannot find the type and size that you requested in another tray. You can set the printer to always prompt you before pulling from tray 1 or only prompt you if tray 1 is empty.
Set the USE REQUESTED TRAY setting on the System Setup submenu of the Configure
Device menu.
Printing by type and size of media (locking trays)
Printing by type and size is a way to be sure that print jobs always print on the media that you want. You can configure the trays for the type, such as plain or letterhead, and size, such as letter or A4, that is loaded in them.
If you configure the trays this way and then select a certain type and size in the printer driver, the printer automatically selects the tray loaded with that type or size. You do not have to select a specific tray (selecting by source). Configuring the printer this way is especially helpful if the printer is shared, and more than one person loads or removes media frequently.
Some older model printers have a feature that "locks out" trays to prevent printing on the wrong media. Printing by type and size eliminates the need to lock trays. For more information about types and sizes that each tray supports, see
Supported types and sizes of print media
.
To print by type and size from tray 2 or tray 3, it might be necessary to unload tray 1 and close it, or set TRAY 1 TYPE and TRAY 1 SIZE to types other than ANY on the PAPER
(Program settings generally override printer-driver settings.)
ENWW Selecting which tray is used for printing 39
NOTE
NOTE
To print by type and size of paper
1. Be sure to load the trays correctly. See Loading trays
.)
2. At the printer control panel, open the PAPER HANDLING menu. Select the paper type for each tray. If you are unsure aboutwhich type you are loading, such as bond or recycled, check the label on the media package.
3. Select the paper-size settings at the printer control panel.
● Tray 1 : Set the paper size on the PAPER HANDLING menu if the printer is set to
TRAY 1 TYPE= a type other than ANY . If custom paper is loaded, also set the custom-paper size on the PAPER HANDLING menu. (For more information, see
Printing on custom-sized media or cardstock .)
● Tray 2 and optional tray 3 : Set the paper size on the PAPER HANDLING menu.
These trays do not support custom sizes.
4. In the program or printer driver, select a type other than Auto Select .
The type and size settings can also be configured in the HP Web Jetadmin software for networked printers.
Manually feeding media from tray 1
The manual feed feature is another way of printing on special media from tray 1. Setting
MANUAL FEED to ON either in the printer driver or at the printer control panel stops the printer after each job is sent, allowing you time to load special paper or other print media in tray 1. Press ( S
ELECT
button) to continue printing.
If tray 1 contains media when you send the print job, and the printer control panel has
TRAY 1 TYPE=ANY and TRAY 1 SIZE=ANY as the default configuration for tray 1 operation, the printer will not stop and wait for media to be loaded. To have the printer wait, set TRAY 1 TYPE and TRAY 1 SIZE to types other than ANY on the PAPER HANDLING menu.
If the SIZE and TYPE are set to ANY , and MANUAL FEED PROMPT is set to UNLESS
LOADED , then the media will be pulled from tray 1 without prompting. If MANUAL FEED
PROMPT is set to ALWAYS , then the printer will prompt you to load media, even if tray 1 is set to TYPE=ANY and SIZE=ANY .
If you have selected MANUAL FEED=ON at the printer control panel, this setting will override the printer driver, and all print jobs that you send to the printer will request manually fed paper in tray 1 unless a specific tray has been selected in the printer driver. If this feature is to be used only occasionally, it is best to set MANUAL FEED=OFF at the printer control panel and to select the manual feed option in the printer driver on a job-by-job basis.
40 Chapter 2 Printing tasks ENWW
Selecting the correct fuser mode
NOTE
The printer automatically adjusts the fuser mode based on the media type to which the tray is set. For example, heavy paper, such as card stock, might need a higher fuser-mode setting in order to make the toner adhere better to the page, but transparencies need the
LOW fuser-mode setting to avoid damage to the printer. The default setting generally provides the best performance for most print-media types.
The fuser mode can be changed only if the media type has been set for the tray that you are
using. (See Printing by type and size of media (locking trays)
.) After the media type has been set for the tray, then the fuser mode for that type can be changed on the CONFIGURE
DEVICE menu in the PRINT QUALITY submenu at the printer control panel. (See
.)
Using a higher fuser mode, such as HIGH 1 or HIGH 2, improves the ability of the toner to adhere to paper, but it might cause other problems, such as excessive curl. The printer might print at a slower speed when the fuser mode is set to HIGH 1 or HIGH 2.
To reset the fuser modes to the default settings, open the CONFIGURE DEVICE menu at the printer control panel. On the PRINT QUALITY submenu, select FUSER MODES , and then select RESTORE MODES .
ENWW Selecting the correct fuser mode 41
Loading trays
Load special print media, such as envelopes, labels, and transparencies, in tray 1 only. Load only paper in tray 2 or optional tray 3.
Loading tray 1 (multipurpose tray)
Tray 1 holds up to 100 sheets of paper, up to 75 transparencies, up to 50 sheets of lables, or up to 10 envelopes. See the following sections for information aboutprinting on special media:
● Preprinted material—
Printing on letterhead, prepunched, or preprinted paper (singlesided)
● Envelopes—
● Labels—
To load tray 1
1. Open tray 1 by pulling the front cover down.
2. Slide out the plastic tray extender. If the media that is being loaded is longer than
229 mm (9 inches), also flip open the additional tray extender.
3. Slide the media-width guides slightly wider than the media.
42 Chapter 2 Printing tasks ENWW
4. Place media into the tray (short-edge in, print-side up). The media should be centered between the media-width guides and under the tabs on the media-width guides.
5. Slide the media-width guides inward until they lightly touch the media stack on both sides without bending it. Make sure that the media fits under the tabs on the media-width guides.
NOTE Do not add media to tray 1 while the printer is printing. This could cause a jam. Do not close the front door when the printer is printing.
Loading tray 2 (250-sheet tray)
Tray 2 supports only paper (A4, A5, B5 JIS, Letter, Legal, Executive, and 8.5 x 13 inches).
To load tray 2
1. Pull the tray out of the printer and remove any paper.
ENWW Loading trays 43
2. Adjust the media-width guides outward so that the pointer matches the paper size that you are loading.
3. On the rear paper-length guide, press on the blue tab and adjust it so that the pointer matches the paper size that you are loading.
4. Place the paper in the tray and make sure that it is flat at all four corners. Keep the paper below the height tabs on the paper-length guide in the rear of the tray.
5. Push down on the paper to lock the metal paper-lift plate in place.
6. Slide the tray into the printer.
44 Chapter 2 Printing tasks ENWW
NOTE
NOTE
Whenever you remove tray 2 from the printer, always push down on the paper to lock the metal paper-lift plate in place before you replace the tray. The metal paper-lift plate releases and lifts the paper when you push the tray into the printer.
Loading optional tray 3 (500-sheet tray)
Tray 3 supports only paper (A4, A5, B5 JIS, Letter, Legal, Executive, and 8.5 x 13 inches).
The tray 3 500-sheet feeder comes standard with some HP Color LaserJet 2460 printer models.
To load tray 3
1. Pull the tray out of the printer and remove any paper.
2. Adjust the rear length guide for the correct paper size.
3. Adjust the side width guide for the correct paper size.
ENWW Loading trays 45
4. Place the paper in the tray and make sure that it is flat at all four corners. Keep the paper below the hooks on the side and rear of the tray.
5. Slide the tray into the printer.
46 Chapter 2 Printing tasks ENWW
Understanding media output options
The printer comes with two output bins. The top output bin is used when the rear output bin is closed. The rear output bin is used when the rear output bin is open.
1
2
NOTE
1 Top output bin (face down)
2 Rear output bin (face up)
When tray 1 and the rear output bin are used together, they provide a straight-through paper path for your print job. Using a straight-through paper path can sometimes reduce curling.
ENWW Understanding media output options 47
Printing on envelopes
WARNING!
CAUTION
You can print envelopes from tray 1. Tray 1 holds up to 10 envelopes and supports standard or custom sizes.
For printing on any size of envelope, make sure to set the margins in your program at least
15.0 mm (0.6 inch) from the edge of the envelope.
The printer might print at a slower speed when printing envelopes. In addition, printing performance depends on the construction of the envelope. Always test a few sample envelopes before purchasing a large quantity. For envelope specifications, see
.
Never use envelopes that contain coated linings, exposed self-stick adhesives, or other synthetic materials. These items can emit noxious fumes.
Envelopes that have clasps, snaps, windows, coated linings, exposed self-stick adhesives, or other synthetic materials can severely damage the printer. To avoid jamming and possible printer damage, never try to print on both sides of an envelope. Before you load envelopes, make that sure they are flat and not damaged or stuck together. Do not use envelopes that contain pressure-sensitive adhesive.
To load envelopes in tray 1
Many types of envelopes can be printed from tray 1. Up to 10 can be stacked in the tray.
1. Open tray 1 by pulling the front cover down, then pull out the media support and fold out the media extension.
NOTE
2. Open the rear output bin by pulling down on the top section of the bin. Slide out the extender until it extends fully.
Using the rear output bin reduces envelope curl.
48 Chapter 2 Printing tasks ENWW
3. Slide the width guides on tray 1 outward to a position that is slightly wider than the envelopes.
4. Place the envelopes into the tray short-edge in, print-side up. The stamp end must enter the printer first.
5. Slide the width guides inward until they lightly touch the envelope stack without bending it. The envelopes should be centered between the paper guides and under the tabs on the paper-width guides.
NOTE If the envelope has a flap on the short edge, this edge must enter the printer first. You might experience some jams when using any media that is less than 178 mm (7 inches) long.
Shrinkage might be the result of environmental conditions. For optimum performance, make sure that you are storing and handling the paper correctly. For more information see
Printing and paper storage environment
. Using media from another manufacturer might also help.
ENWW Printing on envelopes 49
Printing on special media
This section discusses printing on types of media that require special handling:
●
●
●
Printing on custom-sized media or cardstock
●
Printing on letterhead, prepunched, or preprinted paper (single-sided)
Printing on labels
Use only labels that are recommended for laser printers. For label specifications, see
.
Guidelines for printing on labels
● Print labels from tray 1.
● Load labels print-side up.
● Use the rear output bin for labels.
● Remove label sheets from the output bin as they are printed to prevent them from sticking together.
● Do not use labels that are separating from the backing sheet or are wrinkled or damaged in any way.
● Do not use label sheets that have the backing sheet exposed, and do not reuse partially used label sheets.
● Do not feed a sheet of labels through the printer more than once. The adhesive backing is designed for one pass through the printer.
CAUTION If a sheet of labels becomes jammed in the printer, see
50 Chapter 2 Printing tasks ENWW
Printing on transparencies
Use only transparencies that are recommended for use in laser printers. For transparency specifications, see
.
Guidelines for printing on transparencies
● Print transparencies from tray 1.
● Use the top output bin to reduce curling (this is for transparencies only; for other media use the rear output bin to reduce curling).
● Remove transparencies from the output bin as they are printed to prevent them from sticking.
● Place transparencies on a flat surface after removing them from the printer.
● Set the printer driver for transparencies. See
Printing by type and size of media (locking trays)
.
● For Macintosh computers, go to the HP LaserJet Utility and select transparencies.
NOTE
Printing on custom-sized media or cardstock
Postcards, 3 x 5 inch (index) cards, and other custom-sized media can be printed from tray 1. The minimum media size is 76 x 127 mm (3 x 5 inches) and the maximum media size is 216 x 356 mm (8.5 x 14 inches).
You might experience some jams when using any media that is less than 178 mm (7 inches) long. Shrinkage might be the result of environmental conditions. For optimum performance, make sure that you are storing and handling the paper correctly. See
odd sizes or weights of media (for example, small, long, or narrow paper) can decrease print speed. The decreased speed helps to prolong the life of internal printer parts. It also improves print quality with these types of media.
ENWW Printing on special media 51
Guidelines for printing on custom-sized media and cardstock
● Always insert the short-edge first into tray 1. If you want to print in landscape mode, make this selection through your software. Inserting paper long-edge first might cause a jam.
● Use the rear output bin to reduce curl.
● Do not print on media that is smaller than 76 mm (3 inches) wide or 127 mm (5 inches) long.
● In the software program, set margins at least 6.40 mm (0.25 inch) away from the edges of the media.
Printing on letterhead, prepunched, or preprinted paper
(single-sided)
When printing letterhead, prepunched, or preprinted paper, it is important to orient the paper correctly. Follow the guidelines in this section for printing on one side only. For duplexing guidelines, see
Printing on both sides (duplexing) .
Tray 1 orientation: print-side up, top edge toward the printer.
52 Chapter 2 Printing tasks ENWW
Tray 2 or tray 3 orientation: print-side down, top edge toward you.
NOTE When Alternative Letterhead mode is enabled in the printer driver, and Letterhead or
Preprinted is selected as the media type, you must orient the media for two-sided (duplex) printing.
Guidelines for printing on letterhead or preprinted forms
● Do not use letterhead paper that is printed with low-temperature inks, such as those used in some types of thermography.
● Do not use raised or embossed letterhead.
● The printer uses heat and pressure to fuse toner to the paper. Make sure that any colored paper or preprinted forms use inks that are compatible with this fusing temperature (200°C or 392°F for 0.1 second).
ENWW Printing on special media 53
Printing on both sides (duplexing)
CAUTION
You can print on both sides of a sheet of paper (called duplexing or two-sided printing) in two ways—automatic and manual. The following paper sizes are supported for automatic duplexing: Letter, A4, Legal, and 8.5 x 13 inches. Manual duplexing supports all paper sizes.
● Automatic duplexing: The built-in, automatic duplexer is included only with the
HP LaserJet 2420d, 2420dn, and 2430dtn printer models.
● Manual duplexing: All printer models are capable of manual duplex printing. The printer prints the first side of each page, waits for you to reinsert the paper into the printer, and then prints the second side of each page. Other documents cannot be printed while the printer waits for you to insert the paper for the second side to be printed.
Even if the printer includes a built-in duplexer, manual duplexing is necessary for the following situations:
● When duplexing paper other than the supported sizes or weights—for example, paper heavier than 105 g/m 2 (28 lb) or very thin paper.
● When you select Straight Paper Path in the printer driver
Do not print on both sides of labels, transparencies, or vellum. Damage to the printer and jams might result.
Paper orientation for printing on both sides
Print on the second side of the sheet of paper first. The paper needs to be oriented as shown in the following illustration.
● For tray 1, load the first side facing down with the bottom, short edge toward the printer.
● For all other trays, load the first side facing up with the top, short edge toward the printer.
1
1 Tray 1
2 All other trays
2
54 Chapter 2 Printing tasks ENWW
Layout options for printing on both sides
The following illustration shows the four print-orientation options. These options are available when Print on Both Sides is selected on the Finishing tab in the printer driver.
2
1 2 3
2
4
2
3
5
2
3
5
5
3
5
3
CAUTION
ENWW
1. Long-edge landscape*
2. Short-edge landscape
3. Long-edge portrait
4. Short-edge portrait*
This layout is often used in accounting, data processing, and spreadsheet programs. Every other printed image is oriented upside-down. Facing pages are read continuously from top to bottom.
Each printed image is oriented right-side-up. Facing pages are read from top to bottom on the left page, then from top to bottom on the right page.
This is the default printer setting, and the most common layout used, with every printed image oriented right-side-up. Facing pages are read from top to bottom on the left page, then from top to bottom on the right page.
This layout is often used with clipboards. Every other printed image is oriented upside-down. Facing pages are read continuously from top to bottom.
* When using Windows drivers, select Flip Pages Up to get the designated binding options.
To duplex by using the built-in duplexer
The built-in duplexer is included only with the HP LaserJet 2420d, 2420dn, and 2430dtn models.
1. Insert enough paper into one of the trays to accommodate the print job. If you are loading special paper such as letterhead, load it in one of the following ways:
● For tray 1, load the letterhead paper with the front side down, bottom-edge first.
● For all other trays, load the letterhead paper with front side facing up, and the top edge toward the back of the tray.
Do not load paper that is heavier than 105 g/m 2 (28 lb bond). Jamming could result.
2. Open the printer driver (see Changing the settings for a print job ).
3. On the Finishing tab, select Print on Both Sides .
Printing on both sides (duplexing) 55
NOTE
NOTE
4. Click OK .
5. Send the print job to the printer.
The paper you are printing on will partially come out of the top output bin during the duplexing. Do not pull on the paper until duplexing is complete. During duplexing, the duplexer will not function if the rear output bin is open.
To duplex manually
1. Insert enough paper into one of the trays to accommodate the print job. If you are loading special paper such as letterhead, load it in one of the following ways:
● For tray 1, load the letterhead paper with the front side down, bottom-edge first.
● For all other trays, load the letterhead paper with first side up, top edge toward the back of the tray.
2. Open the printer driver (see Changing the settings for a print job ).
3. On the Finishing tab, select Print on Both Sides .
4. Click OK .
5. Send the print job to the printer.
6. Go to the printer. Remove any blank paper that is in tray 1. Insert the printed stack with the blank side up, with the top-edge feeding into the printer first . You must print the second side from tray 1.
7. If prompted by a message at the control panel-display, press ( S
ELECT
button).
If the number of total sheets exceeds the tray 1 capacity for manual duplex jobs, you must repeat steps 6 and 7 each time that paper is inserted, until the duplexing job is complete.
56 Chapter 2 Printing tasks ENWW
Canceling a print job
You can cancel a print job from a software program or a print queue, or by pressing the S
TOP button on the printer control panel.
● If the printer has not started printing, first try to cancel the job within the software program that sent the print job.
● If the print job is waiting in a print queue or print spooler such as the Printers group on a
Windows computer or Print Monitor on a Macintosh computer, delete the job there.
● If the print job is already printing, press the S
TOP
button. The printer will finish printing any pages that are already moving through the printer and delete the rest of the print job.
If the control-panel status lights continue to cycle after a job has been canceled, the computer is still sending the job to the printer. Either delete the job from the print queue or wait until the computer has finished sending data (the printer will return to the ready state, with the Ready light on).
Pressing S
TOP
cancels only the current job in the printer. If more than one print job is in printer memory, S
TOP
must be pressed once for each job.
ENWW Canceling a print job 57
Using the printer driver
NOTE
The printer driver provides access to the printer features and allows the computer to communicate with the printer. This section provides instructions for printing when setting options are set from the printer driver.
If possible, try to set printing features from the software program in which you are working or from the Print dialog box. You can set the printer features this way for most Windows and
Macintosh software programs. If a setting is not available in the software program or printer driver, you must set it at the printer control panel.
For more information about printer-driver features, see the printer-driver online Help. For more information about printing from a specific software program, see the documentation for the program.
Printer-driver settings override control panel settings. Software program settings override both printer-driver settings and control panel settings.
Changing the settings for a print job
If you want printing settings to be used only in the software program you are using, change the settings from the program. After you quit the program, the printer settings return to the defaults that are configured in the printer driver.
To change print settings for a print job on Windows computers
1. In the software program, click File .
2. Click Print .
3. Click Setup or click Properties . (The options might be different for your program.)
4. Change the print settings.
5. When you are finished, click OK .
To change print settings for a print job on Macintosh computers
1. In the software program, click File .
2. Click Print .
3. In the dialog box that appears, select the print settings that you want to change and make the changes.
4. When you are finished, click OK .
Changing default settings
If you want printing settings to be used in all software programs you use on the computer, change the default settings in the printer driver.
Choose the procedure for your operating system:
●
To change default settings in Windows 98 and Windows Me
●
To change default settings in Windows NT 4.0
58 Chapter 2 Printing tasks ENWW
ENWW
●
To change default settings in Windows 2000, Windows XP, and Windows Server 2003
●
To change default settings in Macintosh operating systems
To change default settings in Windows 98 and Windows Me
1. Click the Start button.
2. Click Settings .
3. Click Printers .
4. Right-click the HP LaserJet 2400 series printer icon.
5. Click Properties .
6. Change any of the settings on the tabs. These settings are now the defaults for the printer.
7. Click OK to save your settings and to close the printer driver.
To change default settings in Windows NT 4.0
1. Click the Start button.
2. Click Settings .
3. Click Printers .
4. Right-click the HP LaserJet 2400 series series printer icon.
5. Click Document Defaults .
6. Change any of the settings on the tabs. These settings are now the defaults for the printer.
7. Click OK to save your settings and to close the printer driver.
To change default settings in Windows 2000, Windows XP, and
Windows Server 2003
1. Click the Start button.
2. Click Settings .
3. Click Printers (Windows 2000) or Printers and Faxes (Windows XP and Windows
Server 2003).
4. Right-click the HP LaserJet 2400 series printer icon.
5. Click Properties .
6. On the Advanced tab, click Printing Defaults .
7. Change any of the settings on the tabs. These settings are now the defaults for the printer.
8. Click OK to return to the Advanced tab.
9. Click OK to save your settings and to close the printer driver.
Using the printer driver 59
To change default settings in Macintosh operating systems
Depending on the Macintosh operating system version that you have, use either the Apple
Desktop Printer Utility, the Print Center, or the Print Setup Utility to change printer driver defaults.
60 Chapter 2 Printing tasks ENWW
Using printer-driver features
This section provides instructions for common printing features that are controlled through the printer driver.
●
●
Printing multiple pages on one sheet of paper
●
●
Using EconoMode (draft) printing
●
Selecting print-quality settings
●
●
●
Printing a cover, a different first or last page, or a blank page
NOTE
NOTE
Printing watermarks
A watermark is a marking, such as "Top Secret," "Draft," or someone's name, printed in the background of selected pages in a document.
If you are using Windows NT 4.0, Windows 2000, Windows XP, or Windows Server 2003 you must have administrator privileges to create watermarks.
To print a watermark on Windows computers (all versions)
1. Open the printer driver (see Changing the settings for a print job ).
2. On the Effects tab, select a watermark from the Watermarks drop-down list. To edit or create a watermark, click Edit .
3. Click OK .
To print a watermark on Macintosh computers
Select Custom and specify the text that you want, depending on your printer-driver version.
Watermarks are supported only for Mac OS 9.
x . Watermarks are not supported for
Mac OS X V10.1 and later.
ENWW Using printer-driver features 61
Printing multiple pages on one sheet of paper
You can print more than one document page on a single sheet of paper (this is sometimes called 2-up, 4-up, or n-up printing). The pages will appear decreased in size and arranged on the sheet. You can specify that up to 16 pages are to be printed on a single sheet. This feature provides a cost-effective and environmentally friendly way to print draft pages, especially when combined with duplex printing (see
Printing on both sides (duplexing) ).
To print multiple pages on one side of a sheet of paper on Windows computers (all versions)
1. Open the printer driver (see Changing the settings for a print job ).
2. On the Finishing tab, select the number of pages per sheet from the Pages per sheet drop-down menu.
3. If you want borders around the pages, click Print Page Borders .
4. Select the page order from the Page Order drop-down list.
5. Click OK .
Setting a custom paper size
Use the custom paper feature to print on paper sizes other than standard sizes.
To set a custom paper size on Windows computers
1. Open the printer driver (see Changing the settings for a print job ).
2. On the Paper/Quality tab, click Custom .
3. Specify the custom width and height.
4. Click Close .
5. Click OK .
62 Chapter 2 Printing tasks ENWW
ENWW
To set a custom paper size on Macintosh computers
For Mac OS 9
1. On the File menu, select Page Setup .
2. From the Page Attributes drop-down menu, select Custom Page Size .
3. Click New to create a named custom page size. The new custom page is automatically added to the Page Size menu in Page Setup .
For Mac OS X
1. On the File menu, select Page Setup .
2. On the Settings drop-down menu, click Page Attributes , and then click Custom Paper
Size .
3. Click New , and type in a name for the custom paper size.
4. Type the height and width for the custom paper size. Click Save
5. On the Settings drop-down menu, click Page Attributes . Make sure that the Format for drop-down menu is set for Any Printer .
6. In the Page Attributes window, click Paper Size , and then select the new custom paper size. Verify that the dimensions are correct.
7. Click OK .
Using EconoMode (draft) printing
Use EconoMode (draft) printing to print with less toner on each page. Selecting this option might extend the life of your print cartridge and reduce your cost per page, but will reduce print quality.
HP does not recommend full-time use of EconoMode. If Economode is used full-time when the average toner coverage is significantly less than five percent, it is possible that the toner supply will outlast the mechanical parts in the print cartridge. If print quality begins to degrade under these circumstances, you will need to install a new print cartridge, even if toner remains in the cartridge,
To use EconoMode (draft) printing on Windows computers
1. Open the printer driver (see Changing the settings for a print job ).
2. On the Paper/Quality tab, click EconoMode .
3. Click OK .
Selecting print-quality settings
If you need advanced print quality, you can select from custom settings.
Using printer-driver features 63
NOTE
Resolution options
● Best Quality - use ProRes 1200 for the best print quality.
● Faster Printing - use FastRes 1200 as an alternative resolution for complex graphics or faster output.
● Custom - use this option to specify print-quality settings.
Changing resolution can change the formatting of your text.
To select print-quality settings on Windows computers
1. Open the printer driver. See
Changing the settings for a print job .
2. On the Paper/Quality tab, select the resolution or print-quality settings that you want from the Print Quality drop-down menu.
3. Click OK .
Using reduce/enlarge options
Use the reduce/enlarge options to scale your document to a percentage of its normal size.
You can also choose to scale your document to fit on any size of paper that the printer supports.
To set reduce/enlarge options on Windows computers
1. Open the printer driver. See
Changing the settings for a print job .
2. On the Effects tab, click % of Normal Size .
3. Use the number box or slider scale to reduce or enlarge the scale.
4. Click OK .
Selecting a paper source
If your software program supports printing paper by source, make the selections from the program. Program settings override printer-driver settings.
To select a paper source on Windows computers
1. Open the printer driver. See
Changing the settings for a print job .
2. On the Paper/Quality tab, select the source from the Source is drop-down list.
3. Click OK .
To select a paper source on Macintosh computers
For Mac OS 9 : Select a paper source from the General options in the printer driver.
For Mac OS X : Click File , then click Print , and then click Paper Feed .
64 Chapter 2 Printing tasks ENWW
NOTE
Printing a cover, a different first or last page, or a blank page
Use the following procedure to print the covers of a document on a different media type than the rest of the document or to print the first or last page of a document on different media.
For example, to print the first page of a document on letterhead paper and the rest on plain paper, or to print a cover on card stock and the subsequent pages on plain paper. You can also use this feature to insert blank pages between documents when printing several copies.
This option might not be available in all printer drivers.
To print covers or different pages on Windows computers
This procedure changes the printer's settings for one print job. To change the printer's default settings, see
1. Open the printer driver (see Changing the settings for a print job ).
2. On the Paper/Quality tab, click Use different paper/Covers .
3. To print covers or to insert a blank page between documents, select Front Cover or
Back Cover from the drop-down list. Click Add a Blank or Preprinted Cover.
Select the Source is and Type is for the cover or blank page. The blank page can be either a front cover or a back cover. Click OK .
4. To print a different first or last page, select First Page , Other Pages , or Last Page from the drop-down list. Select the Source is and Type is for the different pages. Click OK .
To print covers or different pages on Macintosh computers
For Mac OS 9 : In the Print dialog box, select First from and Remaining from .
For Mac OS X : Click File , then click Print , and then click Paper Feed .
ENWW Using printer-driver features 65
Using job-storage features
NOTE
The printer supports two distinct job-storage features that you can use to initiate printing from the printer control panel after the print job is sent from the computer:
● Proof and hold jobs
● Private jobs
Make sure that you identify your jobs in the printer driver before printing. Using default names might override previous jobs that have the same default name or cause the job to be deleted.
The job-storage features require 48 MB of RAM. For printer models that have less than
48 MB of RAM, you can add memory so that they can support the features, see
you turn the printer power off, all quick copy, proof and hold, and private jobs are deleted. A job can also be deleted at the printer control panel.
NOTE
NOTE
Proofing and holding a job
The proof and hold feature provides a quick and easy way to print one copy of a job for proofing before printing the additional copies.
If you turn the printer power off, all quick copy, proof and hold, and private jobs are deleted.
To print the remaining copies of a held job
1. Press ( S
ELECT
button) to open the menus.
2. Use ( U
P
button) or ( D
OWN
button) to scroll to RETRIEVE JOB , and then press
( S
ELECT
button).
3. Use ( U
P
button) or ( D
OWN
button) to scroll to the user name, and then press
( S
ELECT
button).
4. Use ( U
P
arrow) or ( D
OWN
button) to scroll to the user or job name, and then press
( S
ELECT
button).
5. Use ( U
P
button) or ( D
OWN
button) to scroll to PRINT, and then press ( S
ELECT button).
6. Use ( U
P
button) or ( D
OWN
button) to scroll to the number of copies, and then press
( S
ELECT
button).
Deleting a held job
When you send a proof and hold job, the printer automatically deletes your previous proof and hold job. If no proof and hold job already exists with that job name, and the printer needs additional space, the printer might delete other proof and hold jobs starting with the oldest one.
If you turn the printer power off, all quick copy, proof and hold, and private jobs are deleted.
A held job can also be deleted at the printer control panel.
66 Chapter 2 Printing tasks ENWW
NOTE
ENWW
To delete a held job
1. Press ( S
ELECT
button) to open the menus.
2. Use ( U
P
button) or ( D
OWN
button) to scroll to RETRIEVE JOB, and then press
( S
ELECT
button).
3. Use ( U
P
button) or ( D
OWN
button) to scroll to the user name, and then press
( S
ELECT
button).
4. Use ( U
P
button) or ( D
OWN
button) to scroll to the user or job name, and then press
( S
ELECT
button).
5. Use ( U
P
button) or ( D
OWN
button) to scroll to DELETE, and then press ( S
ELECT button).
Printing a private job
Use the private printing feature to specify that a job is not printed until you release it by typing a four-digit personal identification number (PIN) at the printer control panel. You specify the PIN in the printer driver, and it is sent to the printer as part of the print job.
To specify a private job
To specify in the driver that a job is private, select the Private Job option and type a 4digit PIN.
To print a private job
1. Press ( S
ELECT
button) to open the menus.
2. Use ( U
P
button) or ( D
OWN
button) to scroll to RETRIEVE JOB, and then press
( S
ELECT
button).
3. Use ( U
P
button) or ( D
OWN
button) to scroll to the user name, and then press
( S
ELECT
button).
4. Use ( U
P
button) or ( D
OWN
button) to scroll to the user or job name, and then press
( S
ELECT
button).
5. Use ( U
P
button) or ( D
OWN
button) to scroll to PRINT. A lock symbol appears next to
PRINT. Press ( S
ELECT
button).
6. You are prompted to type the PIN number. Use ( U
P
button) or ( D
OWN
button) to change the first number of the PIN, and then press ( S
ELECT
button). An asterisk
(*) appears in place of the number. Repeat these steps to change the remaining three numbers of the PIN.
7. Use ( U
P
button) or ( D
OWN
button) to scroll to the number of copies, and then press
( S
ELECT
button).
Deleting a private job
A private job is automatically deleted after the user releases it for printing, unless the user selects the Stored Job option in the printer driver.
If you turn the printer power off, all quick copy, proof and hold, and private jobs are deleted.
A private job can also be deleted at the printer control panel before it is ever printed.
Using job-storage features 67
To delete a private job
1. Press ( S
ELECT
button) to open the menus.
2. Use ( U
P
button) or ( D
OWN
button) to scroll to RETRIEVE JOB, and then press
( S
ELECT
button).
3. Use ( U
P
button) or ( D
OWN
button) to scroll to the user name, and then press
( S
ELECT
button).
4. Use ( U
P
button) or ( D
OWN
button) to scroll to the user or job name, and then press
( S
ELECT
button).
5. Use ( U
P
button) or ( D
OWN
button) to scroll to DELETE, and then press ( S
ELECT button). (A lock symbol appears next to DELETE.)
6. You are prompted to type the PIN number. Use ( U
P
button) or ( D
OWN
button) to change the first number of the PIN, and then press ( S
ELECT
button). An asterisk (*) appears in place of the number. Repeat these steps to change the remaining three numbers of the PIN.
68 Chapter 2 Printing tasks ENWW
3
Managing and maintaining the printer
This chapter contains information about these topics:
●
●
Using HP Web Jetadmin software
●
●
●
Managing and configuring printer drivers
●
●
●
Checking the printer configuration
●
●
ENWW 69
Using the embedded Web server
Use the embedded Web server to view printer and network status and to manage printing functions from your computer instead of from the printer control panel. The following are examples of what you can do using the embedded Web server:
● View printer-control status information.
● Set the type of media that is loaded in each tray.
● Determine the remaining life for all supplies and order new ones.
● View and change tray configurations.
● View and change the printer control-panel menu configuration.
● View and print internal pages.
● Receive notification of printer and supplies events.
● View and change network configuration.
The embedded Web server feature requires at least 48 MB of RAM and an HP Jetdirect print server in order to connect to your network.
To use the embedded Web server, you must have Microsoft Internet Explorer 5.01 or later or
Netscape 6.2 or later for Windows, Mac OS, and Linux (Netscape only). Netscape Navigator
4.7 is required for HP-UX 10 and HP-UX 11. The embedded Web server works when the printer is connected to an IP-based network. The embedded Web server does not support
IPX-based printer connections. You do not have to have Internet access to open and use the embedded Web server.
When the printer is directly connected to a computer, the embedded Web server is supported for Windows 98 and later. In order to use the embedded Web server with a direct connection, you must select the Custom installation option when you install the printer driver.
Select the option to load the HP Toolbox. The proxy server is installed as part of the
HP Toolbox software.
When the printer is connected to the network, the embedded Web server is automatically available.
Another option for access to the embedded Web server is the HP Printer Access Tool. The
HP Printer Access Tool software provides a single point of access to the embedded Web server (EWS) for all of the networked printers in each user’s local Printers folder. By using a
Web browser, users can view the supplies-status information, control print jobs, and manage product configuration through the EWS.
NOTE
Opening the embedded Web server
1. In a supported Web browser on your computer, type the IP address for the printer. To find the IP address, print a configuration page. For more information about printing a configuration page, see
.
After you open the URL, you can bookmark it so that you can return to it quickly in the future.
2. The embedded Web server has three tabs that contain settings and information about the printer: the Information tab, the Settings tab, and the Networking tab. Click the tab that you want to view.
3. See the following sections for more information about each tab.
70 Chapter 3 Managing and maintaining the printer ENWW
ENWW
Information tab
The Information pages group consists of the following pages.
● Device Status . This page shows the printer status and shows the life remaining of HP supplies, with 0% representing that a supply is empty. The page also shows the type and size of print media set for each tray. To change the default settings, click Change
Settings .
● Configuration page . This page shows the information that is found on the printer configuration page.
● Supplies Status . This page shows the life remaining of HP supplies, with 0% representing that a supply is empty. This page also provides supplies part numbers. To order new supplies, click Order Supplies in the Other Links area of the window. To visit any Web site, you must have Internet access.
● Event log . This page shows a list of all printer events and errors.
● Device information . This page also shows the printer network name, address, and model information. To change these entries, click Device Information on the Settings tab.
● Control panel . Click this button to view the current status of the printer control panel.
Settings tab
Use this tab to configure the printer from your computer. The Settings tab can be password protected. If this printer is networked, always consult with the printer administrator before changing settings on this tab.
The Settings tab contains the following pages.
● Configure Device . Configure all printer settings from this page. This page contains the traditional menus found on printers that use a control-panel display. These menus include Information , Paper Handling , and Configure Device .
● Alerts . Network only. Set up to receive e-mail alerts for various printer and supplies events.
● Email . Network only. Used in conjunction with the Alerts page to set up incoming and outgoing e-mail.
● Security . Set a password that must be typed in order to gain access to the Settings and
Networking tabs. Turn on and off certain features of the EWS.
● Other Links . Add or customize a link to another Web site. This link is shown in the
Other Links area on all embedded Web server pages. These permanent links always appear in the Other Links area: HP Instant Support , Order Supplies , and Product
Support .
● Device Information . Name the printer and assign an asset number to it. Type the name and e-mail address for the primary contact who will receive information about the printer.
● Language . Determine the language in which to show the embedded Web server information.
● Time Services . Set the printer to retrieve the date and time from a network server at regular intervals.
Using the embedded Web server 71
Networking tab
The network administrator can use this tab to control network-related settings for the printer when it is connected to an IP-based network. This tab will not appear if the printer is directly connected to a computer, or if the printer is connected to a network with anything other than an HP Jetdirect print server.
Other links
This section contains links that connect you to the Internet. You must have Internet access in order to use any of these links. If you use a dial-up connection and did not connect when you first opened the embedded Web server, you must connect before you can visit these
Web sites. Connecting might require that you close the embedded Web server and reopen it.
● HP Instant Support . Connects you to the HP Web site to help you find solutions. This service analyzes your printer error log and configuration information to provide diagnostic and support information specific to your printer.
● Order Supplies . Click this link to connect to an ordering Web site and order genuine HP supplies, such as print cartridges and media.
● Product Support . Connects to the support site for the HP LaserJet 2400 series printer.
Then, you can search for help regarding general topics.
72 Chapter 3 Managing and maintaining the printer ENWW
Using HP Web Jetadmin software
NOTE
HP Web Jetadmin is a Web-based software solution for remotely installing, monitoring, and troubleshooting network-connected peripherals. The intuitive browser interface simplifies cross-platform management of a wide range of devices, including HP and non-HP printers.
Management is proactive, allowing network administrators the ability to resolve printer issues before users are affected. Download this free, enhanced-management software at http://www.hp.com/go/webjetadmin_software .
To obtain plug-ins to HP Web Jetadmin, click plug-ins , and then click the download link that is next to the name of the plug-in that you want. The HP Web Jetadmin software can automatically notify you when new plug-ins are available. On the Product Update page, follow the directions to automatically connect to the HP Web site.
If installed on a host server, HP Web Jetadmin is available to any client through a supported
Web browser, such as Microsoft Internet Explorer 6.0 for Windows or Netscape
Navigator 7.1 for Linux. Browse to the HP Web Jetadmin host.
Browsers must be Java-enabled. Browsing from an Apple PC is not supported.
ENWW Using HP Web Jetadmin software 73
Using the HP Toolbox
NOTE
HP Toolbox is a Web application that you can use for the following tasks:
● Check the printer status.
● Configure the printer settings.
● View troubleshooting information.
● View online documentation.
You can view the HP Toolbox when the printer is directly connected to your computer or when it is connected to the network. You must perform a complete software installation in order to use the HP Toolbox.
You do not have to have Internet access to open and use the HP Toolbox. However, if you click a link in the Other Links area, you must have Internet access to go to the site that is
associated with the link. See Other links for more information.
Supported operating systems
The HP Toolbox is supported for the following operating systems:
● Windows 98, 2000, Me, XP, and Server 2003
● Mac OS X, Version 10.2 or higher
Supported browsers
To use the HP Toolbox, you must have one of the following browsers:
Windows
● Microsoft Internet Explorer 5.5 or higher
● Netscape Navigator 7.0 or higher
● Opera Software ASA Opera 6.05 or higher
Macintosh (OS X only)
● Microsoft Internet Explorer 5.1 or higher
● Netscape Navigator 7.0 or higher
All pages can be printed from the browser.
74 Chapter 3 Managing and maintaining the printer ENWW
NOTE
To view the HP Toolbox
1. Open the HP Toolbox in one of these ways:
● On the Windows desktop, double-click the HP Toolbox icon.
● From the Windows Start menu, click Programs , and then click HP Toolbox .
● For Macintosh OS X, on the hard drive, click Applications , and then click the
Utilitites folder. Double-click the HP Toolbox icon .
After you open the URL, you can bookmark it so that you can return to it quickly in the future.
2. The HP Toolbox opens in a Web browser. The HP Toolbox software contains the following sections:
●
●
●
●
●
●
●
Status tab
The Status tab has links to the following main pages:
● Device Status . View printer status information. This page indicates printer conditions such as a jam or an empty tray. After you correct a problem with the printer, click the
Refresh button to update the device status.
● Supplies Status . View detailed supplies status such as the percent of life remaining in the print cartridge and the number of pages that have been printed with the current print cartridge. This page also has links to order supplies and to find recycling information.
● Print Info . Print the configuration page and various other information pages that are available for the printer, such as the supplies status page, the demo page, and the menu map.
Troubleshooting tab
The Troubleshooting tab has links to the following main pages:
● Print Quality Tools . View general troubleshooting information, view information about troubleshooting print-quality problems, and calibrate the printer to maintain color print quality.
● Maintenance . View information about managing printer supplies, view information about replacing the print cartridges, and view information about replacing other printer supplies.
● Error Messages . View information about error messages.
● Paper Jams . View information on locating and clearing jams.
ENWW Using the HP Toolbox 75
NOTE
● Supported Media . View information about media that the printer supports, view information about configuring the trays, and view information about solving problems that are related to print media.
● Printer Pages . Print various pages that are useful for troubleshooting printer problems including the configuration page, the supplies page, the event log page, and the usage page.
Alerts tab
Use the Alerts tab to configure the printer to automatically notify you of printer alerts. The
Alerts tab has links to the following main pages:
● Set up status alerts
● Administrative settings
Set up status alerts page
On the Set up status alerts page, you can choose to turn alerts on or off, specify when the printer should send an alert, and select from two different types of alerts:
● Pop-up message
● System tray icon
Click Apply to activate the settings.
Administrative settings page
On the Administrative settings page, you can set the frequency of how often the HP Toolbox checks for printer alerts. Three settings are available:
● Less Often . The HP Toolbox checks for alerts once per minute (every 60 seconds).
● Normal . The HP Toolbox checks for alerts twice per minute (every 30 seconds).
● More Often . The HP Toolbox checks for alerts twenty times per minute (every 3 seconds).
If you want to reduce network input/output (I/O) traffic, reduce the frequency at which the printer checks for alerts.
Documentation tab
The Documentation tab contains links to these information sources:
● Install Notes . Provides specific installation instructions and information regarding your product before you install and use the printing system.
● User Guide . Contains the information about the printer usage, warranty, specifications, and support that you are currently reading. The user guide is available in both HTML and PDF format.
Device Settings window
When you click the Device Settings button, the embedded Web server opens in a new window. See
Using the embedded Web server .
76 Chapter 3 Managing and maintaining the printer ENWW
Toolbox links
The toolbox Links item at the left of the screen provides links to the following options:
● Select a device . Select from all of the HP Toolbox-enabled devices.
● View current alerts . View the current alerts for all printers that have been set up. (You must be printing to view the current alerts.)
● Text only page . View HP Toolbox as a site map with links to all of the individual pages within HP Toolbox and the Device Settings window.
Other links
This section contains links that connect you to the Internet. You must have Internet access in order to use any of these links. If you use a dial-up connection and did not connect when you first opened the HP Toolbox, you must connect before you can visit these Web sites.
Connecting might require that you close the HP Toolbox and reopen it.
● HP instant support . Connects to the HP instant support page for the product.
● Product Registration . Connects to the HP product registration Web site.
● Product Support . Connects to the support site for the printer. Then, you can search for help with a specific problem.
ENWW Using the HP Toolbox 77
Uninstalling the HP Toolbox
This section explains how to uninstall the HP Toolbox.
NOTE
To uninstall the HP Toolbox by using the Windows desktop shortcut
1. Click Start .
2. Point to Programs .
3. Point to Hewlett-Packard or to the HP LaserJet 2400 series program group, and then click Uninstall hp LaserJet Toolbox .
4. Follow the onscreen instructions.
To uninstall the HP Toolbox by using Add/Remove Programs in the Windows control panel
1. Click Start .
2. Click Control Panel .
In some versions of Windows, point to Settings , and then click Control Panel .
3. Double-click Add or Remove Programs .
4. Select hp LaserJet Toolbox from the list of programs, and then follow the onscreen instructions.
78 Chapter 3 Managing and maintaining the printer ENWW
Managing and configuring printer drivers
Your system or network administrator can use the driver management and configuration solution to configure printer drivers before you install and deploy them within your environment. This is helpful when you configure printer drivers for multiple workstations or printers that share the same configuration.
When you preconfigure your printer driver to match the printer hardware, you can gain access to all of the printer accessories through the driver. You can also configure most driver feature settings. Five of the driver features can be "locked." This means that you can choose not to allow users to change the duplex, print color as gray, input tray, output tray, and media type settings. (Some features might not apply to all printers. For example, some printers do not include color printing or duplexing.)
The driver management and configuration solution saves time and reduces management costs. Previously, if an administrator wanted to configure printer drivers, the configuration had to be completed at each client workstation. Because the driver management and configuration solution offers multiple configuration options, administrators can create a single configuration, in a central location, that best fits their software installation and deployment strategy.
The driver management and configuration solution also gives administrators more control over their printing environment, because they can deploy drivers that share the same configuration across an entire organization. They can use the "lock" feature to support organization initiatives. For example, if a printer includes a duplexer, locking the duplex setting ensures that all print jobs are printed on two sides to save paper. All of the controls can be deployed from a single computer.
Two methods are available:
● HP Web Jetadmin software plug-in
● Customization utility
Regardless of the configuration method that is used, one configuration can be shared by all printer drivers for a given printer model with one pass through either the plug-in or the utility.
The single configuration provides support for multiple operating systems, printer driver languages, and localized language versions.
A single configuration file is associated with all supported drivers, and can be modified by using either the plug-in or the utility.
HP Web Jetadmin software plug-in
A driver management and configuration plug-in is available for the HP Web Jetadmin software. You can use the plug-in to configure the printer drivers before installation and deployment. This method for managing and controlling printer drivers provides a complete, end-to-end solution that you can use to set up and configure the printer, the print path
(queue), and the client computers or workstations. The following activities are included in the workflow:
● Discover and configure the printer(s).
● Discover and configure the print path on the server(s). You can have multiple servers configured in a batch, or multiple printers (of the same model type) using a single server.
● Obtain the printer driver(s). You can install multiple drivers for each print queue that is connected to a server in environments that support multiple operating systems.
● Run the configuration editor (the editor is not supported for some older drivers).
ENWW Managing and configuring printer drivers 79
● Deploy the configured printer drivers to the server(s).
● Instruct the end-users to connect to the print server. The configured driver for their operating system is automatically deployed to their computer.
Administrators can use the HP Web Jetadmin software plug-in to deploy configured printer drivers using a silent, batch, or remote process. Obtain the HP Web Jetadmin software plugin from http://www.hp.com/go/webjetadmin_software .
Customization utility
Administrators can use a customization utility to create a custom installation package that includes only the components that are needed within a specific organization or operating environment. The customization utility is available in two places:
● On the CD-ROM that comes with the printer (the utility is one of the installer options)
● In the printing system software that is available for downloading from the HP Web site for the printer model.
The installation procedure prompts the administrator to select components from the contents of the printing system. During this process, the administrator is prompted to configure the printer driver settings, if the selected drivers support preconfiguration. The process yields a customized installation package that the administrator can deploy to install the configured printer drivers on the client computers and workstations. The customization utility supports silent and batch operations.
80 Chapter 3 Managing and maintaining the printer ENWW
Configuring e-mail alerts
You can use HP Web Jetadmin or the embedded Web server to configure the system to alert you to problems with the printer. The alerts take the form of e-mail messages to the email account or accounts that you specify.
You can configure the following information:
● The device that you want to monitor (in this case, the printer)
● What alerts are to be received (for example, alerts for jams, paper out, ORDER
CARTRIDGE , REPLACE CARTRIDGE , and cover open )
● The e-mail account to which the alerts should be forwarded
Utitlity
HP Web Jetadmin
Embedded Web server
Information source
●
See Using HP Web Jetadmin software for
general information about HP Web Jetadmin.
● See HP Web Jetadmin online Help for details about alerts and how to set them up.
●
See Using the embedded Web server
for general information about the embedded Web server.
● See the Embedded Web server online Help for details about alerts and how to set them up.
ENWW Configuring e-mail alerts 81
Setting the real-time clock
Use the real-time clock feature to set the date and time settings. The date and time information is attached to stored print jobs, so you can identify the most recent versions of stored print jobs.
Setting the date and time
When setting the date and time you can set the date format, date, time format, and time.
Setting the date format
1. Press M
ENU
to open the menus.
2. Use ( U
P
button) or ( D
OWN
button) to scroll to CONFIGURE DEVICE , and then press
( S
ELECT
button).
3. Use ( U
P
button) or ( D
OWN
button) to scroll to SYSTEM SETUP , and then press
( S
ELECT
button).
4. Use ( U
P
button) or ( D
OWN
button) to scroll to DATE/TIME , and then press ( S
ELECT button).
5. Use ( U
P
button) or ( D
OWN
button) to scroll to DATE FORMAT , and then press
( S
ELECT
button).
6. Use ( U
P
button) or ( D
OWN
button) to scroll to the desired format, and then press
( S
ELECT
button).
7. The settings are saved and the control panel returns to the DATE/TIME submenu.
8. Press M
ENU
to exit the menu.
82 Chapter 3 Managing and maintaining the printer ENWW
NOTE
Setting the date
1. Press M
ENU
to open the menus.
2. Use ( U
P
button) or ( D
OWN
button) to scroll to CONFIGURE DEVICE , and then press
( S
ELECT
button).
3. Use ( U
P
button) or ( D
OWN
button) to scroll to SYSTEM SETUP , and then press
( S
ELECT
button).
4. Use ( U
P
button) or ( D
OWN
button) to scroll to DATE/TIME , and then press ( S
ELECT button).
5. Use ( U
P
button) or ( D
OWN
button) to scroll to DATE , and then press ( S
ELECT button).
6. Use ( U
P
button) or ( D
OWN
button) to scroll to the appropriate year, and then press
( S
ELECT
button).
The order of modifying the YEAR , MONTH , and DAY depends upon the date format setting.
YEAR , MONTH , or DAY could be the first selection.
7. Use ( U
P
button) or ( D
OWN
button) to scroll to the appropriate month and then press
( S
ELECT
button).
8. Use ( U
P
button) or ( D
OWN
button) to scroll to the appropriate day and then press
( S
ELECT
button).
9. The settings are saved and the control panel returns to the DATE/TIME submenu.
10. Press M
ENU
to exit the menu.
Setting the time format
1. Press M
ENU
to open the menus.
2. Use ( U
P
button) or ( D
OWN
button) to scroll to CONFIGURE DEVICE , and then press
( S
ELECT
button).
3. Use ( U
P
button) or ( D
OWN
button) to scroll to SYSTEM SETUP , and then press
( S
ELECT
button).
4. Use ( U
P
button) or ( D
OWN
button) to scroll to DATE/TIME , and then press ( S
ELECT button).
5. Use ( U
P
button) or ( D
OWN
button) to scroll to TIME FORMAT , and then press
( S
ELECT
button).
6. Use ( U
P
button) or ( D
OWN
button) to scroll to the desired time format, and then press
( S
ELECT
button).
7. The settings are saved and the control panel returns to the DATE/TIME submenu.
8. Press M
ENU
to exit the menu.
ENWW Setting the real-time clock 83
Setting the time
1. Press M
ENU
to open the menus.
2. Use ( U
P
button) or ( D
OWN
button) to scroll to CONFIGURE DEVICE , and then press
( S
ELECT
button).
3. Use ( U
P
button) or ( D
OWN
button) to scroll to SYSTEM SETUP , and then press
( S
ELECT
button).
4. Use ( U
P
button) or ( D
OWN
button) to scroll to DATE/TIME , and then press ( S
ELECT button).
5. Use ( U
P
button) or ( D
OWN
button) to scroll to TIME , and then press ( S
ELECT
button).
6. Use ( U
P
button) or ( D
OWN
button) to scroll to the appropriate hour, and then press
( S
ELECT
button).
7. Use ( U
P
button) or ( D
OWN
button) to scroll to the appropriate minute, and then press
( S
ELECT
button).
8. The settings are saved and the control panel returns to the DATE/TIME submenu.
9. Press M
ENU
to exit the menu.
84 Chapter 3 Managing and maintaining the printer ENWW
Checking the printer configuration
At the printer control panel, you can print pages that give details about the printer and its current configuration. The following information pages are described here:
●
●
●
●
For a complete list of printer information pages, see the INFORMATION menu at the printer control panel (see
Keep these pages nearby for troubleshooting. They are also useful if you contact
HP Customer Care.
NOTE
Menu map
Print the menu map to see the current settings for the menus and items that are available at the printer control panel.
To print a menu map
1. Press ( S
ELECT
button) to open the menus.
2. Use ( U
P
button) or ( D
OWN
button) to scroll to INFORMATION , and then press
( S
ELECT
button).
3. Use ( U
P
button) or ( D
OWN
button) to scroll to PRINT MENU MAP , and then press
( S
ELECT
button).
You might want to store the menu map near the printer for reference. The content of the menu map varies, depending on the options currently installed in the printer. (Many of these values can be overridden in the program or printer driver.)
For a complete list of control panel items and possible values, see
change a control panel setting, see
Changing printer-control-panel configuration settings .
Configuration page
Use the configuration page to view current printer settings, to help troubleshoot printer problems, or to verify installation of optional accessories, such as memory (DIMMs), trays, and printer languages.
If an HP Jetdirect print server is installed, an HP Jetdirect configuration page prints as well.
The IP address of the HP Jetdirect print server appears on this page.
To print a configuration page at the control panel
1. Press ( S
ELECT
button) to open the menus.
2. Use ( U
P
button) or ( D
OWN
button) to scroll to INFORMATION , and then press
( S
ELECT
button).
ENWW Checking the printer configuration 85
NOTE
3. Use ( U
P
button) or ( D
OWN
button) to scroll to PRINT CONFIGURATION , and then press ( S
ELECT
button).
An example of the configuration page follows. The content of the configuration page varies, depending on the options currently installed in the printer.
You can also obtain configuration information in the embedded Web server or the
HP Toolbox. For details, see
or see
hp
LaserJet
2400 printers
1
1
2
5
6
3
4
5
6
3
4
1
2
Printer Information
Installed Personalities and Options
Memory
Event Log
Security
Paper Trays and Options
Lists the model, serial number, page counts, and other information for the printer.
Lists all printer languages that are installed (such as PS and PCL) and lists options that are installed in each DIMM slot and EIO slot.
Lists printer memory, PCL Driver Work
Space (DWS), and resource saving information.
Lists the number of entries in the event log, the maximum number of entries viewable, and the last three entries.
Lists the status of the printer control panel lock, control panel password, and disk drive (if one is installed in the printer).
Lists the size settings for all trays and lists optional paper-handling accessories that are installed.
86 Chapter 3 Managing and maintaining the printer ENWW
NOTE
Supplies status page
Use the supplies status page to obtain information about the print cartridge that is installed in the printer, the amount of life left in the print cartridge, and the number of pages and jobs that have been processed.
You can also obtain configuration information in the embedded Web server or the
HP Toolbox. For details, see
or see
To print a supplies status page at the control panel
1. Press ( S
ELECT
button) to open the menus.
2. Use ( U
P
button) or ( D
OWN
button) to scroll to INFORMATION , and then press
( S
ELECT
button).
3. Use ( U
P
button) or ( D
OWN
button) to scroll to PRINT SUPPLIES STATUS PAGE , and then press ( S
ELECT
button).
hp LaserJet
2400 printers
1
100%
1
ENWW
2
3
1 Information about the print cartridge, including estimated pages remaining
2 Information about ordering replacement supplies
3 Information about recycling supplies
PS or PCL font list
Use the font lists to see which fonts are currently installed in the printer. The font lists also show which fonts are resident on an optional hard disk accessory or flash DIMM.
To print a PS or PCL font list
1. Press ( S
ELECT
button) to open the menus.
Checking the printer configuration 87
NOTE
2. Use ( U
P
button) or ( D
OWN
button) to scroll to INFORMATION , and then press
( S
ELECT
button).
3. Use ( U
P
button) or ( D
OWN
button) to scroll to PRINT PS FONT LIST or PRINT PCL
FONT LIST , and then press ( S
ELECT
button).
The PS font list shows the PS fonts that are installed, and gives a sample of those fonts. The following information can be found on the PCL font list:
● Font gives the font names and samples.
● Pitch/Point indicates the pitch and point size of the font.
● Escape Sequence (a PCL programming command) is used to select the designated font. (See the legend at the bottom of the font list page.)
For information about using printer commands to select a font with MS-DOS ® programs, see
Selecting PCL 6 and PCL 5 fonts .
● Font # is the number used to select fonts at the printer control panel (not in the program). Do not confuse the font # with the font ID. The number indicates the
CompactFlash slot where the font is stored.
● SOFT : Downloaded fonts, which stay resident in the printer until other fonts are downloaded to replace them, or until the printer power is turned off.
● INTERNAL : Fonts that permanently reside in the printer.
● Font ID is the number you assign to soft fonts when you download them through software.
88 Chapter 3 Managing and maintaining the printer ENWW
Managing the print cartridge
This section provides information about HP print cartridges, their life expectancies, how to store them, and how to identify genuine HP supplies. Information also appears about non-
HP print cartridges.
●
●
●
Print-cartridge authentication
●
●
Print-cartridge life expectancy
●
●
Cartridge-low and cartridge-out conditions
CAUTION
HP print cartridges
When you use a genuine HP print cartridge, you can obtain several types of information, such as the following:
● Amount of toner remaining
● Estimated number of pages remaining
● Number of pages printed
Non-HP print cartridges
Hewlett-Packard Company cannot recommend use of non-HP print cartridges, either new or remanufactured. Because they are not HP products, HP cannot influence their design or control their quality. Service or repair required as a result of using a non-HP print cartridge will not be covered under the printer warranty.
Using genuine HP supplies ensures the availability of all HP printing features.
Print-cartridge authentication
The printer will let you know if a print cartridge is not a genuine HP print cartridge when you insert it into the printer. If you believe that you purchased a genuine HP supply, visit us at http://www.hp.com/go/anticounterfeit .
Print-cartridge storage
Do not remove the print cartridge from its package until you are ready to use it.
Always store the print cartridge in the proper environment. The temperature should be between -20°C and 40°C (-4°F to 104°F). The relative humidity should be between 10% and
90%.
To prevent damage to the print cartridge, do not expose it to light for more than a few minutes.
ENWW Managing the print cartridge 89
Print-cartridge life expectancy
The life of the print cartridge depends on the amount of toner that print jobs require and the length of life for the components inside the cartridge. When printing text at 5% coverage
(typical for a business letter), the HP print cartridge lasts an average of 6,000 (Q6511A) or
12,000 (Q6511X) pages.
At any time, you can verify life expectancy by checking the supply level, as described in
.
Checking the supply level
You can check the supply (toner) level by using the printer control panel, the embedded
Web server, HP Toolbox software, or HP Web Jetadmin.
To check the supply level by using the control panel
1. Press M
ENU
to open the menus.
2. Use ( U
P
button) or ( D
OWN
button) to scroll to INFORMATION , and then press
( S
ELECT
button).
3. Use ( U
P
button) or ( D
OWN
button) to scroll to PRINT SUPPLIES STATUS PAGE , and then press ( S
ELECT
button). See Supplies status page for information about the
supplies status page.
To check the supply level by using the embedded Web server
1. In your Web browser, type the IP address for the printer home page. This takes you to
the printer status page. (See Opening the embedded Web server
.)
2. On the left side of the screen, click Supplies Status . This takes you to the supplies status page, which provides supply level information. (See
for information about the supplies status page.)
To check the supply level by using the HP Toolbox software
You can configure HP Toolbox to notify you when the print cartridge is low. You can choose to receive alerts by e-mail or as a pop-up message or taskbar icon. To check the supplies status by using the HP Toolbox software, click the Status tab, then click Supplies Status .
To check the supply levels by using HP Web Jetadmin
In HP Web Jetadmin, select the printer device. The device status page shows supply-level information.
Cartridge-low and cartridge-out conditions
The printer alerts you if the print cartridge is low on toner or out of toner.
90 Chapter 3 Managing and maintaining the printer ENWW
ENWW
When the cartridge is low on toner or drum life
When the cartridge is low, the printer control panel shows the ORDER CARTRIDGE message. The message first appears when about 16% (6,000-page cartridge) or about 8%
(12,000-page cartridge) of the life remains in the print cartridge. This percentage is set with the intent of providing approximately 2 weeks of typical use before the cartridge is depleted.
You should have time to purchase a new cartridge before the old cartridge is depleted.
The default is for the printer to continue printing until the cartridge runs out, but you might prefer to have the printer stop instead of continuing when the ORDER CARTRIDGE message first appears—for example, if you want print quality to remain consistently high during print jobs, or if you do not want the cartridge to run out during a long print job. To configure the printer to stop, in the CONFIGURE DEVICE menu, under SYSTEM SETUP , set CARTRIDGE LOW to STOP . Then, when REPLACE CARTRIDGE appears, the printer will stop printing. You can resume printing by pressing ( S
ELECT
button) for each print job.
When the cartridge is out of toner or drum life
The REPLACE CARTRIDGE message appears in one of these situations:
● When the print cartridge is out of toner.
If CARTRIDGE OUT is set to CONTINUE (in the SYSTEM SETUP submenu of the CONFIGURE DEVICE menu), the printer continues printing without interaction until the cartridge reaches the end of drum life. HP does not guarantee print quality after the REPLACE CARTRIDGE message first appears. Replace the print cartridge as soon as possible. (See
Ordering parts, accessories, and supplies .) The
REPLACE CARTRIDGE message remains until you replace the print cartridge. If CARTRIDGE OUT is set to STOP , the printer stops printing until you replace the print cartridge or resume printing by configuring the printer to continue: In the CONFIGURE DEVICE menu, under SYSTEM SETUP , set CARTRIDGE
OUT to CONTINUE .
● When the drum life of the print cartridge is out . You must replace the print cartridge to continue printing. No override is possible, even if toner remains in the cartridge. (See
Ordering parts, accessories, and supplies .) This situation occurs to protect the printer.
Managing the print cartridge 91
Cleaning the printer
Over time, particles of toner and paper accumulate inside the printer. This can cause printquality problems during printing. Cleaning the printer eliminates or reduces these problems.
Clean the paper path and print-cartridge areas every time that you change the print cartridge or whenever print-quality problems occur. As much as possible, keep the printer from dust and debris.
CAUTION
Cleaning the outside
Clean the outside of the printer with a cloth that has been dampened with water.
Do not use ammonia-based cleaners on or around the printer.
Cleaning the paper path and print-cartridge areas
Over time, particles of toner and paper accumulate inside the printer. This can cause printquality problems during printing. Cleaning the printer eliminates or reduces these problems.
To clean the inside of the printer
1. Turn the printer off and unplug the power cord.
2. Open the top cover.
3. Remove the print cartridge.
CAUTION To prevent damage to the print cartridge, do not expose it to light for more than a few minutes. Be careful not to touch the transfer roller (the black, rubber roller located underneath the print cartridge). Skin oils on the roller can cause print-quality problems.
92 Chapter 3 Managing and maintaining the printer ENWW
4. With a dry, lint-free cloth, wipe any residue from the paper path area and the print cartridge cavity.
NOTE
5. Reinstall the print cartridge and close the top cover.
If the print cartridge is difficult to reinstall, make sure that the registration plate has been flipped back down into position and that you have pushed the print cartridge firmly in place.
ENWW
6. Plug in the power cable and turn the printer on.
Cleaning the fuser
Run the printer cleaning page to keep the fuser free of toner and paper particles that can sometimes accumulate. Accumulation of toner and particles can cause specks to appear on the front or back side of your print jobs.
To ensure optimum print quality, HP recommends that you use the cleaning page every time that you replace the print cartridge or on an automatic interval that you can set up.
The cleaning procedure takes about 2.5 minutes to complete. A CLEANING message appears on the printer control panel display while the cleaning is taking place.
To run the cleaning page
In order for the cleaning page to work properly, print the page on copier-grade paper (not bond, heavy, or rough paper).
1. If your printer model includes a duplexer, open the rear output bin.
2. Press M
ENU
to open the menus.
3. Use ( U
P
button) or ( D
OWN
button) to scroll to CONFIGURE DEVICE , and then press
( S
ELECT
button).
4. Use ( U
P
button) or ( D
OWN
button) to scroll to PRINT QUALITY , and then press
( S
ELECT
button).
5. Use ( U
P
button) or ( D
OWN
button) to scroll to CREATE CLEANING PAGE , and then press ( S
ELECT
button).
6. Follow the instructions on the cleaning page to complete the cleaning process.
Cleaning the printer 93
7. If your printer model includes a duplexer, close the rear output bin.
94 Chapter 3 Managing and maintaining the printer ENWW
4
Problem solving
This troubleshooting information is organized to help you resolve printing problems. Choose the general topic or type of problem from the following list.
●
●
Solving general printing problems
●
●
●
●
Understanding printer messages
●
Correcting print-quality problems
●
Troubleshooting network printing problems
●
Troubleshooting common Windows problems
●
Troubleshooting common Macintosh problems
●
Troubleshooting common PostScript problems
ENWW 95
Troubleshooting flowchart
NOTE
If the printer is not responding properly, use the flowchart to determine the problem. If the printer does not pass a step, follow the corresponding troubleshooting suggestions.
If you cannot resolve the problem after following the suggestions in this guide, contact an
HP-authorized service or support provider. (See
Macintosh users : For more troubleshooting information, see
1 Does the control panel display read READY?
YES Go to step 2.
NO
The display is blank, and the printer fan is off.
The display is blank, but the printer fan is on.
The display is in the wrong language.
The display shows garbled or unfamiliar characters.
A message other than
READY appears on the printer control panel display.
96 Chapter 4 Problem solving ENWW
ENWW
● Turn the printer off then on.
● Check the power cord connections and the power switch.
● Plug the printer into a different outlet.
● Check that the power supplied to the printer is steady, and meets printer specifications.
(See
)
● Press a printer control panel button to see if the printer responds.
● Turn the printer power off, and then turn the printer power on.
● Turn the printer power off and then on. When
XXX MB appears on the controlpanel display, press and hold down
( S
ELECT button) until all three lights stay on. This could take up to
10 seconds.
Then, release
( S
ELECT button).
Press
( D
OWN button) to scroll through the available languages.
Press
( S
ELECT button) to save the desired language as the new default.
● Make sure that the desired language is selected at the printer control panel.
● Turn the printer power off, and then turn the printer power on.
● Go to
Interpreting control-panel messages .
2 Can you print a configuration page?
(See
.)
YES
NO
A configuration page does not print.
Go to step 3.
A blank page prints.
A message other than
READY or PRINTING
CONFIGURATION appears on the printer control panel display.
Troubleshooting flowchart 97
● Check that all trays are properly loaded, adjusted, and installed in the printer.
● Using the computer, check the print queue or print spooler to see if the printer has been paused. If there are problems with the current print job, or if the printer is paused, a configuration page will not print. (Press S
TOP
and try step 2 in the troubleshooting flowchart again.)
● Check that the sealing tape is not still in the print cartridge. (See the getting started [start] guide or the instructions that came with the print cartridge.)
● The print cartridge might be empty. Install a new print cartridge.
● Go to
Interpreting controlpanel messages
.
3 Can you print from a program?
YES
NO
The job will not print.
Go to step 4.
A PS error page or list of commands prints.
98 Chapter 4 Problem solving ENWW
ENWW
● If the job will not print, and a message appears on the printer control panel display, see
Interpreting control-panel messages
.
● Using the computer, check to see if the printer has been paused. Press S
TOP
to continue.
● If the printer is on a network, check that you are printing to the correct printer. To verify that it is not a network problem, connect the computer directly to the printer with a parallel or USB cable, change the port to
LPT1, and try to print.
● Check the interface cable connections.
Disconnect and reconnect the cable at the computer and the printer.
● Test the cable by trying it on another computer.
● If you are using a parallel connection, make sure that the cable is IEEE-1284 compliant.
● If the printer is on a network, print a
configuration page. (See Configuration page .) If an HP Jetdirect print server is
installed, a Jetdirect page also prints. Check the Jetdirect configuration page to verify that the network protocol status and settings are correct for the printer.
● To verify that it is not a computer problem, print from another computer (if possible).
● Make sure that the print job is being sent to the correct port (LPT1 or network printer port, for example).
● Check that you are using the proper printer driver. (See
● Reinstall the printer driver. (See the getting started [start] guide.)
● Check that the computer port is configured and working properly. (Try connecting another printer to that port and printing.)
● If printing with the PS driver, on the Printing submenu (on the Configure Device menu) at the printer control panel, set PRINT PS
ERRORS=ON , and then print the job again.
If an error page prints, see the instructions in the next column.
● On the System Setup submenu (on the
Configure Device menu) at the printer control panel, make sure that
PERSONALITY=AUTO .
● You might be missing a printer message that could help you solve the problem. On the System Setup submenu (on the
Configure Device menu) at the printer control panel, temporarily turn the Clearable
Warnings and Auto Continue settings off.
Then, print the job again.
● The printer might have received a nonstandard PS code. On the System Setup submenu (on the Configure Device menu) at the printer control panel, set
PERSONALITY=PS for this print job only.
After the job has printed, return the setting to AUTO.
● Make sure that the print job is a PS job, and that you are using the PS driver.
● The printer might have received PS code although it is set to PCL. On the System
Setup submenu (on the Configure Device menu), set PERSONALITY=AUTO .
Troubleshooting flowchart 99
4 Does the job print as expected?
YES
NO
Print is garbled, or only a portion of the page prints.
Go to step 5.
Printing stops in the middle of the job.
Print speed is slower than expected.
A printer control panel setting is not taking effect.
100 Chapter 4 Problem solving ENWW
ENWW
● Check that you are using the proper printer driver. (See
● The data file sent to the printer might be corrupt.
To test, try printing it on another printer (if possible), or try a different file.
● Check the interface cable connections. Test the cable by trying it on another computer (if possible).
● Replace the interface cable with a high-quality cable (see
● Simplify the print job, print at a lower resolution, or install more printer memory.
(See
.)
● You might be missing a printer message that could help you solve the problem.
On the System
Setup submenu
(on the Configure
Device menu) at the printer control panel, temporarily turn the Clearable
Warnings and
Auto Continue settings off. Then print the job again.
The print job is not formatted correctly.
● S
TOP
might have been pressed.
● Check that the power supplied to the printer is steady, and that it meets printer specifications.
(See Electrical specifications .)
Paper is not fed correctly or is damaged.
● Simplify the print job.
● Add more memory to the printer. (See
.)
● Turn banner pages off. (See your network administrator.)
● Note that slower speeds should be expected if you are printing narrow paper, printing from tray
1, using the HIGH
2 fuser mode, or have set Small
Paper Speed to
SLOW.
● Check settings in the printer driver or program. (The printer driver and program settings override printer control panel settings.)
There are print-quality problems.
Troubleshooting flowchart 101
● Check that you are using the proper printer driver. (See
● Check the program settings.
(See the program online Help.)
● Try a different font.
● Downloaded resources might have been lost.
You might need to download them again.
● Make sure that the paper is loaded correctly and that the guides are not too tight or too loose against the paper stack.
● If you are having problems printing custom-size paper, see
Printing on custom-sized media or cardstock .
● If pages are wrinkled or curled, or if the image is skewed on the page, see
Correcting printquality problems
.
● Adjust the print resolution. (See
● Check that RET is on. (See
●
Go to Correcting print-quality problems .
5 Does the printer select the proper trays?
YES For other problems, check the Contents, the Index, or the printer driver online Help.
NO
The printer pulls paper from the wrong tray.
An optional tray is not working properly.
A message other than
READY appears on the printer control panel display.
102 Chapter 4 Problem solving ENWW
ENWW
● Make sure that you have selected the correct tray.
(See
● Make sure that trays are correctly configured for paper size and type. (See
configuration page to see current tray settings. (See
● Make sure that the tray selection (Source) or Type in the printer driver or program is set correctly.
(The printer driver and program settings override the printer control panel settings.)
● By default, paper loaded in tray 1 will be printed first. If you do not want to print from tray 1, remove any paper loaded in the tray or change the USE
REQUESTED TRAY setting. (See
.) Change
TRAY 1 SIZE and TRAY 1
TYPE to a setting other than ANY .
● If you want to print from tray 1, but cannot select the tray in a program, see
Customizing tray 1 operation .
● Print a configuration page to verify that the tray is installed properly and is functional. (See
● Configure the printer driver to recognize the installed tray. (See the printer driver online Help.)
● Turn the printer power off, and then turn the printer power on.
● Verify that you are using the correct optional tray for the printer.
● Go to
Interpreting controlpanel messages
.
Troubleshooting flowchart 103
Solving general printing problems
Troubleshooting common PostScript problems
if you are using the PS driver.
Printer selects media from the wrong tray.
Cause
The tray selection in the software program might be incorrect.
The configured size does not match the size of the media that is loaded in the tray.
Solution
For many software programs, the paper tray selection is found on the Page Setup menu within the program.
Remove any media in other trays to make the printer select from the correct tray.
For Macintosh computers, use the HP LaserJet
Utility to change the priority of the tray.
Through the control panel, change the configured size to match the size of the media that is loaded in the tray.
Printer does not pull paper from tray.
Cause
The tray is empty.
The paper guides are set incorrectly.
Solution
Load paper in the tray.
To set the guides correctly, see Loading trays .
For the 500-sheet paper tray, make sure that the leading edge of the paper stack is even. An uneven edge can prevent the lift plate from rising.
Paper curls when it exits the printer.
Cause Solution
The paper curls when it exits to the top output bin. Open the rear output bin to allow the paper to exit in a straight path through the printer.
Turn over the paper that you are printing on.
Reduce the fusing temperature to reduce the curling. (See
Selecting the correct fuser mode .)
First sheet of media jams in the print-cartridge area.
Cause Solution
A combination of high humidity and high temperature is affecting the media.
Adjust the printer for high humidity and high temperature conditions.
104 Chapter 4 Problem solving ENWW
ENWW
Print job is extremely slow.
Cause
The job might be very complex.
The maximum speed of the printer cannot be exceeded even when more memory is added.
Printing speeds might be automatically reduced when printing on custom-sized media.
Note: Slower speeds are expected when printing on narrow paper, when printing from tray 1, or when using the HIGH 2 fuser mode.
You are printing a PDF or PostScript (PS) file but are using a PCL printer driver.
In the printer driver, Optimize for: is set to cardstock, heavy, rough, or bond paper.
Solution
Reduce the complexity of the page or try adjusting the print-quality settings. If this problem occurs frequently, add memory to the printer.
Try using the PS printer driver rather than the
PCL printer driver. (You can usually do this from a software program.)
In the printer driver, set the type to plain paper
(see
Printing by type and size of media (locking trays)
).
Note : If you change the setting to plain paper, the print job will print faster. However, if you are using heavy media, for best results leave the printer driver set to heavy even though printing might be slower.
Print job prints on both sides of the paper.
Cause
The printer is set for duplexing.
Solution
See Changing the settings for a print job to
change the setting, or see the online Help.
Print job contains only one page but the printer processes the back side of the page as well
(the page comes part of the way out, and then goes back into the printer).
Cause Solution
The printer is set for duplexing. Even if the print job contains only one page, the printer also processes the back side.
See Changing the settings for a print job to
change the setting, or see the online Help.
Do not try to pull the page out of the printer before duplexing is complete. Jamming might result.
Pages print, but are totally blank.
Cause
The sealing tape might still be in the print cartridge.
The file might have blank pages.
Solution
Remove the print cartridge and pull out the sealing tape. Reinstall the print cartridge.
Check the file to make sure that it does not contain blank pages.
Solving general printing problems 105
The printer prints, but the text is wrong, garbled, or incomplete.
Cause Solution
The printer cable is loose or defective.
Disconnect the printer cable and reconnect it.
Try a print job that you know works. If possible, attach the cable and printer to another computer and try a print job that you know works. Finally, try a new cable.
The printer is on a network or sharing device and is not receiving a clear signal.
The wrong driver was selected in the software.
The software program is malfunctioning.
Disconnect the printer from the network and use a parallel or USB cable to attach it directly to a computer. Print a job that you know works.
Check the software's printer selection menu to make sure that an HP LaserJet 2400 series printer is selected.
Try printing a job from another program.
The printer does not respond when you select Print in the software.
Cause Solution
The printer is out of media.
The printer might be in the manual feed mode.
Add media.
Change the printer from manual-feed mode.
The cable between the computer and the printer is not connected properly.
The printer cable is defective.
Disconnect and reconnect the cable.
The wrong printer was selected in the software.
The printer might have a jam.
The software for the printer is not configured for the printer port.
If possible, attach the cable to another computer and print a job that you know works. You might also try using a different cable.
Check the software printer selection menu to make sure that an HP LaserJet 2400 series printer is selected.
Clear any jams, paying careful attention to the duplexer area (if your model has a duplexer).
.
Check the software's printer selection menu to make sure that it is using the correct port. If the computer has more than one port, make sure that the printer is attached to the correct one.
The printer is on a network and is not receiving a signal.
The printer is not receiving power.
Disconnect the printer from the network and use a parallel or USB cable to attach it directly to a computer. Reinstall the printing software. Print a job that you know works.
Clear any stopped jobs from the print queue.
If no lights are on, check the power cord connections. Check the power switch. Check the power source.
106 Chapter 4 Problem solving ENWW
The printer does not respond when you select Print in the software.
Cause Solution
The printer is malfunctioning.
Check the control-panel display for messages and lights to determine if the printer is indicating an error. Note any message and see
Interpreting control-panel messages
.
ENWW Solving general printing problems 107
Guidelines for using paper
For best results, make sure the paper is of good quality, and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or bent edges.
If you are unsure what type of paper you are loading (such as bond or recycled), check the label on the package of paper.
For a complete list of supported media, see
Supported types and sizes of print media .
The following problems with paper cause print quality deviations, jamming, or even damage to the printer.
NOTE
CAUTION
Symptom
Poor print quality or toner adhesion
Dropouts, jamming, curl
Excessive curl
Jamming, damage to printer
Problems with feeding
Problem with paper
The paper is too moist, too rough, too heavy, too smooth, or it is embossed or from a faulty paper lot.
The paper has been stored improperly.
The paper varies from side to side.
The paper is too moist, has the wrong grain direction, or is of short-grain construction.
The paper varies from side to side.
The paper has cutouts or perforations.
Solution
Try another kind of paper, between 100 and 250
Sheffield, and with 4 to 6% moisture content.
Store paper flat in its moistureproof wrapping.
Turn the paper over.
Open the rear output bin, or use long-grain paper.
Turn the paper over.
Use paper that is free of cutouts or perforations.
The paper has ragged edges, or it is from a faulty paper lot.
The paper varies from side to side.
The paper is too moist, too rough, too heavy, or too smooth.
It has the wrong grain direction, is of short-grain construction, or it is embossed.
Use high-quality paper that is made for laser printers.
Turn the paper over.
Try another kind of paper, between 100 and 250
Sheffield, and with 4 to 6% moisture content.
Open the rear output bin, or use long-grain paper.
Do not use letterhead paper that is printed with low-temperature inks, such as those used in some types of thermography. Do not use raised or embossed letterhead. The printer uses heat and pressure to fuse toner to the paper. Make sure that any colored paper or preprinted forms use inks that are compatible with this fusing temperature (200°C or 392°F for
0.1 second).
Failure to follow these guidelines could cause jams or damage to the printer.
108 Chapter 4 Problem solving ENWW
Printing special pages
Special pages within the memory of the printer can help you to diagnose and learn about problems with your printer.
● Configuration page
The configuration page lists many of the current settings and properties of the printer.
For information about how to print the configuration page, see
have an HP Jetdirect print server installed, a second page prints that lists all of the
HP Jetdirect information.
● Font list
You can print a font list using the control panel (see
Macintosh computers) the HP LaserJet Utility (see HP LaserJet Utility
).
● Supplies status page
Use the supplies status page to obtain information about the print cartridge that is installed in the printer, the amount of life that is left in the print cartridge, and the number of pages and jobs that have been processed (see
ENWW Printing special pages 109
Clearing jams
Occasionally, media can become jammed during a print job. The following are some of the causes:
● Trays are loaded improperly or overfilled.
● Tray 2 or tray 3 is removed during a print job.
● The top cover is opened during a print job.
● The media that is being used does not meet HP specifications (see
●
The media that is being used is outside of the supported size range (see Paper specifications ).
Typical jam locations
Jams can occur at four locations:
1
2 4
3
NOTE
1 Print-cartridge area (see
Clearing jams in the print-cartridge area )
2 Input-tray areas (see
Clearing jams in the input trays
)
3 Output-bin areas (see
Clearing jams in the output areas )
4 Duplexer area (applies only to models that include a duplexer) (see
Clearing jams in the duplexer area )
Find and remove the jammed media by using the instructions that are provided in this section. If the location of the jam is not obvious, look first in the print cartridge area. Be sure to remove all torn pieces of media that remain in the printer. Loose toner might remain in the printer after a jam. This should clear after a few sheets have been printed.
Clearing jams in the print-cartridge area
Jams in this area might result in loose toner on the page. If you get any toner on your clothes or hands, wash them in cold water. (Hot water will set the toner into the fabric.)
110 Chapter 4 Problem solving ENWW
1. Open the top cover.
2. Remove the print cartridge.
CAUTION To prevent damage, do not expose the print cartridge to light for more than a few minutes.
Place a piece of paper over the top of the print cartridge to shield it while it is out of the printer.
3. Carefully lift up the registration plate. If the leading edge of the print media is visible, gently pull the media toward the rear of the printer to remove it from the printer.
If the media is difficult to remove or has already entered the output area, remove the jam as described in
Clearing jams in the output areas .
4. When the jammed media has been removed, gently flip down the registration plate.
Reinstall the print cartridge and shut the top cover.
NOTE
ENWW
If the print cartridge is difficult to reinstall, make sure that the registration plate has been flipped back down into position and that you have pushed the print cartridge firmly into place.
If the Attention light does not go out, jammed media remains inside the printer. Check the paper-feed and rear-output areas for jams. For printers that include a built-in duplexer, check the duplexer area.
Clearing jams 111
NOTE
Clearing jams in the input trays
paper-feed area.
1. Slide out tray 2 or tray 3 to expose the jam.
2. Remove any misfed media by pulling it out by the visible edge. Make sure that all of the media is aligned in the tray (see
Loading trays ). If tray 3 is installed, remove any misfed
media and make sure that all of the media is aligned in that tray.
3. If the media is jammed in the paper-feed area and cannot be reached from the printcartridge area, grasp the sheet and carefully pull it free from the printer.
4. For tray 2, push the stack down to lock the metal paper-lift plate into place. For both trays, slide the tray into the printer.
5. To reset the printer and continue printing, press ( S
ELECT
button).
112 Chapter 4 Problem solving ENWW
NOTE
NOTE
If the Attention light does not go out, jammed media remains inside the printer. Check the paper-feed and rear-output areas for jams. For printers that include a built-in duplexer, check the duplexer area.
Clearing jams in the output areas
Jams in this area might result in loose toner on the page. If you get any toner on your clothes or hands, wash them in cold water. (Hot water will set the toner into the fabric.)
1. Open the top cover and remove the print cartridge. Open the rear output bin. (The rear output bin might be hard to open. If necessary, pull hard to open it.)
It is necessary to open the top cover in order to release the rear output gears and to remove the media easily.
2. If the media is visible from the rear output opening, carefully use both hands to pull the leading edge out of the printer. Carefully remove the rest of the jammed media from the printer.
3. If the media is almost completely visible from the top output bin, pull the remaining media carefully out of the printer. If the leading edge is not visible or is barely visible in the print-cartridge area, open the rear output bin all the way. To do this, push the bin door slightly forward and use your finger to disengage the grill at the base. Turn the jamclearing wheel to move the media out of the printer.
ENWW Clearing jams 113
4. Reinstall the print cartridge. Close the top cover and the rear output bin.
NOTE If the print cartridge is difficult to reinstall, make sure that the registration plate has been flipped back down into position and that you have pushed the print cartridge firmly in place.If
the Attention light does not go out, jammed media remains inside the printer. Check the paper-feed and rear-output areas for jams. For printers that include a built-in duplexer, check the duplexer area.
Clearing jams in the duplexer area
This procedure applies only to printers that include a duplexer.
1. Remove tray 2 from the printer.
2. Push the green button on the right front of the tray 2 opening to open the paper-access plate.
3. Reach in and pull out the jammed paper.
114 Chapter 4 Problem solving ENWW
4. Push the bottom of the paper-access plate back up until it clicks into place on both sides
(both sides need to be engaged).
5. Reinstall tray 2.
NOTE If the Attention light does not go out, jammed media remains inside the printer. Check the paper-feed and rear-output areas for jams.
ENWW Clearing jams 115
Understanding printer messages
Printer messages appear on the printer control panel display to relay the normal status of the printer (such as Processing...
) or an error condition (such as CLOSE TOP COVER ) that needs attention.
Interpreting control-panel messages lists the most common messages that
require attention or that might raise questions. Messages are listed in alphabetical order first, with numeric messages at the end of the list.
Using the printer online Help system
This printer features an online Help system on the control panel that provides instructions for resolving most printer errors. Certain control panel messages alternate with instructions about gaining access to the online Help system.
Whenever a message alternates with For help press , press ( H
ELP
button) to view the help and use ( U
P
button) and ( D
OWN
button) to scroll through the message.
To exit the online Help system, press M
ENU
.
Resolving persistent messages
Some messages (for example, requests to load a tray or a message that a previous print job is still in the printer memory) allow you to press ( S
ELECT
button) to print, or to press S
TOP
to clear the job and eliminate the message.
If a message persists after performing all of the recommended actions, contact an HP-
authorized service or support provider. (See HP customer care
or go to
http://www.hp.com/support/lj2420 , or http://www.hp.com/support/lj2430 .)
Interpreting control-panel messages
Control panel message
Access denied
MENUS LOCKED
Canceling...
Description
The printer control panel function you are trying to use has been locked to prevent unauthorized access.
The printer is canceling a job. The message continues while the job is stopped, the paper path is cleared, and any remaining incoming data on the active data channel is received and discarded.
The CompactFlash card in slot X had a critical failure and can no longer be used.
Recommended action
See your network administrator.
No action necessary.
Remove the card and replace it with a
new one. (See Printer memory .)
CARD SLOT X DEVICE
FAILURE alternates with
<Current status message>
CARD SLOT X FILE
OPERATION FAILED alternates with
<Current status message>
The requested operation could not be performed. You might have attempted an illegal operation, such as trying to download a file to a non-existent folder.
Try printing again to an existing folder.
116 Chapter 4 Problem solving ENWW
Interpreting control-panel messages (continued)
Control panel message Description
The CompactFlash card in slot X is full.
CARD SLOT X FILE
SYSTEM IS FULL alternates with
<Current status message>
CARD SLOT X IS
WRITE PROTECTED alternates with
<Current status message>
CARD SLOT <X>
NOT FUNCTIONAL alternates with
<Current status message>
The CompactFlash card in slot X is protected, and no new files can be written to it.
The CompactFlash card in slot X is not working correctly.
The file system has not been initialized.
Recommended action
Delete files from the CompactFlash card and then try again. Use the Device
Storage Manager in HP Web Jetadmin to download or delete files and fonts.
(See the HP Web Jetadmin software
Help for more information.)
Use the Device Storage Manager in
HP Web Jetadmin to disable the write protection.
1.
Turn the printer power off.
2.
Make sure the card is inserted correctly.
3.
If the printer control panel message continues to appear, the card needs to be replaced.
Use HP Web Jetadmin to initialize the file system.
CARD SLOT X NOT
INITIALIZED alternates with
<Current status message>
Checking paper path
Checking printer
CHOSEN PERSONALITY
NOT AVAILABLE alternates with
To continue press
Clearing paper path
DATA RECEIVED alternates with
<current status message>
Event log empty
The printer is checking for possible jams or paper that was not cleared from the printer.
The printer is checking for possible jams or paper that was not cleared from the printer.
The printer received a request for a personality (printer language) that does not exist in the printer. The print job is canceled.
The printer jammed or the printer was turned on and media was detected in a wrong location. The printer is automatically attempting to eject the pages.
The printer is waiting for the command to print (such as waiting for a form feed, or when the print job is paused).
No action necessary.
No action necessary.
Print the job using a printer driver for a different printer language, or add the requested language to the printer (if available).
To see a list of available personalities, print a configuration page. (See
Wait for the printer to finish trying to clear the pages. If it cannot, a jam message will appear on the control panel display.
Press ( S
ELECT
button) to continue.
You are attempting to view an empty event log by selecting SHOW EVENT
LOG from the control panel.
No action necessary.
ENWW Understanding printer messages 117
Interpreting control-panel messages (continued)
Control panel message Description
INSTALL CARTRIDGE
For help press
INSUFFICIENT MEMORY
TO LOAD FONTS/DATA .
alternates with
<DEVICE>
To continue press
LOAD TRAY XX
[TYPE][SIZE]
For help press
LOAD TRAY XX
[TYPE][SIZE]
To continue press alternates with
LOAD TRAY XX
[TYPE][SIZE]
For help press
LOAD TRAY XX
[TYPE][SIZE]
To continue press alternates with
To use another tray press
LOAD TRAY XX
[TYPE][SIZE]
To continue press alternates with
Move tray switch to
CUSTOM
LOAD TRAY XX
[TYPE][SIZE]
To continue press alternates with
Recommend move tray switch to STANDARD
The print cartridge is missing and must be reinstalled for printing to continue.
The printer received more data than can fit in its available memory. You might have tried to transfer too many macros, soft fonts, or complex graphics.
The tray that is indicated is configured for a specific type and size of media needed by a print job, but the tray is empty. All other trays are also empty.
A job is sent that requires a specific type and size that is not available in the tray that is indicated.
A job is sent that requires a specific type and size that is not available in the tray that is indicated.
A job is sent that requires a specific type and size that is not available in the tray that is indicated.
A job is sent that requires a specific type and size that is not available in the tray that is indicated.
Recommended action
Replace or correctly reinstall the print cartridge.
Press ( S
ELECT
button) to print the transferred data (some data might be lost).
To solve this problem, simplify the print job or install additional memory.
Load the requested media in the tray that is indicated.
Load the requested media into the indicated tray and press ( S
ELECT button).
Press ( S
ELECT
button) to use a type and size that are available in another tray.
Move the tray switch to the CUSTOM position if another tray is available.
If the size is detectable and another tray is available, move the switch to the
STANDARD position.
118 Chapter 4 Problem solving ENWW
Interpreting control-panel messages (continued)
Control panel message Description
MANUALLY FEED
OUTPUT STACK alternates with
Then press to print second sides
The first side of a manual duplex job has been printed and the device is waiting for you to insert the output stack to complete the second side.
The printer is waiting for media to be loaded in tray 1 for manual feed.
Recommended action
1.
Load the output stack into tray 1, maintaining the same orientation with printed side down.
2.
To continue printing, press
( S
ELECT
button) to exit the printer message and then press ( S
ELECT button) to print.
Press ( S
ELECT
button) to use a type and size that are available in another tray.
MANUALLY FEED
[TYPE][SIZE]
To use another tray press
MANUALLY FEED
[TYPE][SIZE]
To continue press alternates with
MANUALLY FEED
[TYPE][SIZE]
For help press
No job to cancel
The printer is waiting for media to be loaded in tray 1 for manual feed.
Load the requested media into tray 1 and press ( S
ELECT
button).
NON HP SUPPLY
INSTALLED alternates with
<Current status message>
Economode disabled
ORDER CARTRIDGE alternates with
<current status message>
Paused alternates with
To return to ready press STOP
The S
TOP
button was pressed, but there is no active job or buffered data to cancel.
The message is displayed for approximately 2 seconds before the printer returns to the ready state.
No action necessary.
The printer has detected that the print cartridge is not a genuine HP supply.
The message first appears when about
16% (6,000-page cartridge) or about 8%
(12,000-page cartridge) of the life remains in the print cartridge.
This message is displayed until you install an HP cartridge or press the override button ( S
ELECT
button).
If you believe you purchased a genuine
HP supply, go to http://www.hp.com/go/ anticounterfeit .
Any printer repair required as a result of using non-HP supplies or unauthorized supplies is not covered under the printer warranty.
Make sure that you have a new cartridge ready (see
Ordering parts, accessories, and supplies
).
The printer is paused but continues to receive data until the memory is full. The printer is not experiencing an error.
Press S
TOP
.
ENWW Understanding printer messages 119
Interpreting control-panel messages (continued)
Control panel message Description
RAM DISK DEVICE
FAILURE alternates with
<Current status message>
RAM DISK FILE
OPERATION FAILED alternates with
<Current status message>
RAM DISK FILE
SYSTEM IS FULL alternates with
<Current status message>
The RAM disk had a critical failure and can no longer be used.
The requested operation could not be performed. You might have attempted an illegal operation, such as trying to download a file to a non existent folder.
The RAM disk is full.
Recommended action
Contact an HP-authorized service or support provider.
Try printing again to an existing folder.
The RAM disk is protected, and no new files can be written to it.
1.
Delete files and then try again, or turn the printer power off, and then turn the printer power on to delete all files on the device. (Use Device
Storage Manager in HP Web
Jetadmin or another software utility to delete the files.
2.
If the message persists, increase the size of the RAM disk. Change the RAM disk size on the System
Setup submenu (on the Configure
Device menu) at the printer control panel. See the description of the
RAM disk menu items in System
Setup submenu.
Use the Device Storage Manager in
HP Web Jetadmin to disable the write protection.
RAM DISK IS
WRITE PROTECTED alternates with
<Current status message>
RAM DISK NOT
INITIALIZED alternates with
<Current status message>
REPLACE CARTRIDGE
To continue press
The file system has not been initialized.
Use HP Web Jetadmin to initialize the file system.
Pages remaining for this supply has reached the low threshold. The printer was set to continue printing when a supply needs to be ordered.
Press ( S
ELECT
button) to continue printing the current job.
Follow the next steps to replace the supply.
1.
Open the top cover.
2.
Remove print cartridge.
3.
Install new print cartridge.
4.
Close the top cover.
120 Chapter 4 Problem solving ENWW
Interpreting control-panel messages (continued)
Control panel message
REPLACE CARTRIDGE
For help press alternates with
<current status message>
Description
Pages remaining for this supply has reached the low threshold. The printer was set to stop printing when a supply needs to be ordered.
The tray cannot feed paper to the printer because tray [X] is open and must be closed for printing to continue.
Recommended action
To continue printing, press ( S
ELECT button) to exit the printer message then press ( S
ELECT
button). The message becomes ORDER CARTRIDGE LESS
THAN XXXX PAGES (warning).
Follow the next steps to replace the supply.
1.
Open the top cover.
2.
Remove print cartridge.
3.
Install new print cartridge.
4.
Close the top cover.
Check the trays and close any that are open.
TRAY XX OPEN OR
EMPTY alternates with
<current status message>
TRAY XX
[TYPE][SIZE] alternates with
To change size or type press
This message states the current type and size configuration of the paper tray, and allows you to change the configuration.
To change the paper size or type press
( S
ELECT
button) while the message is present. To clear the message, press the ( B
ACK
button) while the message is present.
● Set size and type to ANY if the tray is used frequently for different sizes or types.
● Set size and type to a specific setting if printing with only one type of paper.
The data on the DIMM is not supported.
The DIMM might need to be replaced.
Turn the printer power off before removing it.
Press ( S
ELECT
button) to continue.
UNSUPPORTED DATA ON
[FS] DIMM IN SLOT X alternates with
To clear press
USE TRAY XX
[TYPE][SIZE] alternates with
To change press /
To use press
10.XX.YY SUPPLY
MEMORY ERROR alternates with
For help press
The printer did not detect the type and size of media requested. The message shows the most likely type and size available and the tray in which they are available.
An error has occurred in one or more of the printer's supplies. Values of XX and
YY are listed below:
XX00 = memory is defective
XX01 = memory is missing
YY00 = black print cartridge
Press ( S
ELECT
button) to accept the values in the message, or use ( U
P button) and ( D
OWN
button) to scroll through the available choices.
1.
Turn the printer power off, and then turn the printer power on to clear the message.
2.
If the message persists, contact an
HP-authorized service or support provider (see
ENWW Understanding printer messages 121
Interpreting control-panel messages (continued)
Control panel message
10.32.00
UNAUTHORIZED SUPPLY alternates with
For help press
13.XX.YY JAM IN
<Location>
20 INSUFFICIENT
MEMORY alternates with
To continue press
21 PAGE TOO COMPLEX alternates with
To continue press
Description
The printer has detected that a printer supply is not a genuine HP supply.
A jam has occurred in the specified location.
The printer received more data than can fit in its available memory. You might have tried to transfer too many macros, soft fonts, or complex graphics.
Recommended action
This message is displayed until you install an HP supply or press the override button ( S
ELECT
button).
If you believe you purchased an HP supply, go to http://www.hp.com/go/ anticounterfeit .
Any printer repair required as a result of using non-HP supplies or unauthorized supplies is not covered under the printer warranty.
Remove jammed media from the
specified location. See Clearing jams
.
If the message persists after all jams have been cleared, a sensor might be stuck or broken. Contact an HPauthorized service or support provider
(see
Press ( S
ELECT
button) to print the transferred data (some data might be lost), and then simplify the print job or
install additional memory. (See Printer memory
.)
22 EIO X
BUFFER OVERFLOW alternates with
To continue press
The data (dense text, rules, raster or vector graphics) sent to the printer was too complex.
1.
Press ( S
ELECT
button) to print the transferred data (some data might be lost).
2.
If this message appears often, simplify the print job or install additional memory. (See
.)
Too much data was sent to the EIO card in the specified slot [X]. An improper communications protocol might be in use.
Note: EIO 0 is reserved for the
HP Jetdirect embedded print server.
1.
Press ( S
ELECT
button) to clear the message. (The job will not be printed.)
2.
Check the host configuration. If the message persists, contact an HPauthorized service or support provider (see
122 Chapter 4 Problem solving ENWW
Interpreting control-panel messages (continued)
Control panel message
22 PARALLEL I/O
BUFFER OVERFLOW alternates with
To continue press
22 USB I/O
BUFFER OVERFLOW alternates with
To continue press
Description
Too much data was sent to the parallel port.
Recommended action
1.
Check for a loose cable connection and be sure to use a high-quality cable. Some non-HP parallel cables might be missing pin connections or might otherwise not conform to the
IEEE-1284 specification. (See
Ordering parts, accessories, and supplies .)
2.
This error can occur if the driver you are using is not IEEE-1284 compliant. For best results, use an
HP driver that came with the printer.
3.
Press ( S
ELECT
button) to clear the error message. (The job will not be printed.)
4.
If the message persists, contact an
HP-authorized service or support provider (see
Too much data was sent to the USB port. Press ( S
ELECT
button) to clear the error message. (The job will not be printed.)
40 EIO X BAD
TRANSMISSION alternates with
To continue press
41.X ERROR
For help press alternates with
41.X ERROR
To continue press
The connection has been broken between the printer and the EIO card in the specified slot [X].
Note: EIO 0 is reserved for the
HP Jetdirect embedded print server.
A temporary printing error occurred.
Press ( S
ELECT
button) to clear the error message and continue printing.
41.3 UNEXPECTED
SIZE IN TRAY X alternates with
LOAD TRAY XX
[TYPE][SIZE]
This is typically caused if two or more sheets stick together in the printer or if the tray is not properly adjusted.
1.
Press ( S
ELECT
button). The page containing the error automatically reprints if jam recovery is enabled.
2.
Turn the printer power off, and then turn the printer power on.
3.
If the message persists, contact an
HP-authorized service or support provider (see
1.
Reload the tray with the correct paper size.
2.
Press ( S
ELECT
button) to scroll to
TRAY XX SIZE= . Reconfigure the size in a tray so that the printer will use a tray that contains the size required for the print job.
3.
If the error does not clear, turn the printer power off, then turn the printer power on.
4.
If the message persists, contact an
HP-authorized service or support provider (see
ENWW Understanding printer messages 123
Interpreting control-panel messages (continued)
Control panel message Description
A critical firmware error has occurred.
49.XXXXX ERROR alternates with
To continue turn off then on
50.X FUSER ERROR
For help press
A fuser error has occurred.
A temporary printing error occurred.
Recommended action
1.
Turn the printer power off, leave it off for 20 minutes, and then turn the printer power on.
2.
If the message persists, contact an
HP-authorized service or support provider (see
1.
Turn the printer power off and then on.
2.
If the message persists, contact an
HP-authorized service or support provider (see
1.
Turn the printer power off and then on.
2.
If the message persists, contact an
HP-authorized service or support provider (see
51.XY ERROR
For help press alternates with
To continue turn off then on
52.XY ERROR
For help press alternates with
To continue turn off then on
53.XY.ZZ CHECK RAM
DIMM SLOT <X> alternates with
To continue turn off then on
A temporary printing error occurred.
There is a problem with the printer memory. The DIMM that caused the error will not be used.
1.
Turn the printer power off and then on.
2.
If the message persists, contact an
HP-authorized service or support provider (see
54.XX ERROR alternates with
To continue turn off then on
This message is typically related to a sensor issue.
You will be prompted to press ( S
ELECT button) to continue in the following cases:
● 1 or 2 DIMMs where the only error is ZZ=04
● 2 DIMMs where one is good and the other has an error with ZZ=01, 02,
03, or 05
● 2 DIMMs where one has an error with ZZ=04 and the other has an error with ZZ=01, 02, 03, or 05
Values of X and Y are as follows:
● X = DIMM type, 1 = RAM
● Y = Device location, 0 = Internal memory (RAM), 1 or 2 = DIMM slot
1 or 2
If the message continues, you might need to replace the specified DIMM.
Turn the printer power off, and then replace the DIMM that caused the error.
Turn the printer power off and then on.
If error reappears, record message and contact an HP-authorized service or
support provider (see HP customer care
.
124 Chapter 4 Problem solving ENWW
Interpreting control-panel messages (continued)
Control panel message Description
A temporary printing error occurred.
55.XX.YY DC
CONTROLLER ERROR alternates with
To continue turn off then on
56.XX ERROR
For help press alternates with
To continue turn off then on
57.XX ERROR
For help press alternates with
To continue turn off then on
58.XX ERROR
For help press alternates with
To continue turn off then on
A temporary printing error occurred as a result of an incorrect input or output request.
A temporary printing error occurred in one of the printer fans.
A printer error has occurred where a memory tag CPU error was detected, or there is a problem with the air sensor or power supply.
59.XY ERROR
For help press alternates with
To continue turn off then on
A temporary printing error occurred.
Recommended action
1.
Turn the printer power off and then on.
2.
If the message persists, contact an
HP-authorized service or support provider (see
1.
Turn the printer power off and then on.
2.
If the message persists, contact an
HP-authorized service or support provider (see
1.
Turn the printer power off and then on.
2.
If the message persists, contact an
HP-authorized service or support provider (see
To resolve problems with the power supply:
1.
Remove the printer from any UPS supplies, additional power supplies, or power strips. Plug the printer into a wall outlet and see if this resolves the problem.
2.
If the printer is already plugged into a wall outlet, try another power source in the building that is independent of the one currently being used.
The line voltage and current source at the printer location might need to be inspected to ensure that they meet the electrical specifications for the printer.
(See Electrical specifications
.)
If the message persists, contact an HPauthorized service or support provider
(see
1.
Turn the printer power off and then on.
2.
If the message persists, contact an
HP-authorized service or support provider (see
ENWW Understanding printer messages 125
Interpreting control-panel messages (continued)
Control panel message
62 NO SYSTEM alternates with
To continue turn off then on
64 ERROR alternates with
To continue turn off then on
68.X STORAGE ERROR
SETTINGS CHANGED alternates with
To continue press
68.X PERMANENT
STORAGE FULL alternates with
To continue press
68.X PERMANENT
STORAGE WRITE FAIL alternates with
To continue press
Description
This message indicates that no system was found. The printer software system is corrupt.
A temporary printing error occurred in the scan buffer.
An error occurred in the printer permanent storage and one or more printer settings has been reset to its factory default.
The printer permanent storage is full.
Some settings might have been reset to the factory defaults.
The storage device is failing to write.
Printing can continue, but there might be some unexpected behaviors because an error occurred in permanent storage.
Recommended action
1.
Turn the printer power off and then on.
2.
If the message persists, contact an
HP-authorized service or support provider (see
1.
Turn the printer power off and then on.
2.
If the message persists, contact an
HP-authorized service or support provider (see
Press ( S
ELECT
button) to clear the message, and press ( S
ELECT
button) to resume printing.
Print a configuration page and check the printer settings to determine which
values have changed. See Configuration page .
If the error does not clear, turn printer off then on. If the error reappears, record the message and contact an HPauthorized service or support provider
(see
1.
If the error does not clear, turn printer off then on.
2.
Print a configuration page and check the printer settings to determine which values have changed. See
3.
Turn the printer power off, then press and hold M
ENU
while turning the printer on to clean up permanent storage.
4.
If the error reappears, record the message and contact an HPauthorized service or support provider (see
Press ( S
ELECT
button) to continue.
If the error does not clear, turn the printer off then on. If error reappears, record the message and contact an HPauthorized service or support provider
(see
126 Chapter 4 Problem solving ENWW
Interpreting control-panel messages (continued)
Control panel message
79.XXXX ERROR alternates with
To continue turn off then on
8X.YYYY
EIO ERROR
8X.YYYY EMBEDDED
JETDIRECT ERROR
Description
The printer detected a critical hardware error.
The EIO accessory card has encountered a critical error.
The embedded HP Jetdirect print server has encountered a critical error.
Recommended action
1.
Press S
TOP
to clear the print job from the printer memory. Turn the printer power off and then on.
2.
Try printing a job from a different program. If the job prints, go back to the first program and try printing a different file. If the message appears only with a certain program or print job, contact the software vendor for assistance.
If the message persists with different programs and print jobs, try these steps.
1.
Turn the printer power off.
2.
Disconnect all cables to the printer that connect it to the network or computer.
3.
Remove all the memory DIMMs or third-party DIMMs from the printer.
Then reinstall at least one memory
DIMM . (See
.)
4.
Remove all EIO devices and
CompactFlash cards from the printer.
5.
Turn the printer power on.
If the error no longer exists, follow these steps.
1.
Install each DIMM and EIO device one at a time, making sure to turn the printer power off and back on as you install each device.
2.
Replace a DIMM or EIO device if you determine that it causes the error.
3.
Reconnect all cables that connect the printer to the network or computer.
1.
Turn the printer power off and then on.
2.
Turn the printer power off, reseat the EIO accessory, and then turn the printer power on.
3.
Replace the EIO accessory.
1.
Turn the printer power off and then on.
2.
If the message persists, contact an
HP-authorized service or support provider (see
ENWW Understanding printer messages 127
Correcting print-quality problems
This section helps you define print-quality problems and what to do to correct them. Often print- quality problems can be handled easily by making sure that the printer is properly maintained, using print media that meets HP specifications, or running a cleaning page.
NOTE
NOTE
Print-quality checklist
General print-quality problems can be solved by following the checklist below.
● Check the printer driver to make sure that you are using the best available print quality option (see
Selecting print-quality settings
).
● Try printing with one of the alternative printer drivers. The most recent printer drivers area available for download from http://www.hp.com/go/lj2410_software , http://www.hp.com/go/lj2420_software , or http://www.hp.com/go/lj2430_software .
● Clean the inside of the printer (see
●
Check the paper type and quality (see Paper specifications ).
●
Check to make sure that EconoMode is off in the software (see Using EconoMode
● Troubleshoot general printing problems (see
Solving general printing problems
).
● Install a new HP print cartridge, and then check the print quality again. (See the instructions provided with the print cartridge.)
If the page is totally blank (all white) check to make sure that the sealing tape is removed from the print cartridge and ensure that the print cartridge is installed correctly.Newer
printers have been optimized to print characters more accurately. This might result in characters that look lighter or thinner than you are used to from your older printer. If the page is printing images darker than those from an older printer, and you want the images to match the older printer, make these changes in your printer driver: on the Finishing tab, select
Print Quality , select Custom , click Details , and click the check box for Print Images Lighter .
Image defect examples
Use the examples in this image-defect table to determine which print-quality problem you are experiencing, and then see the corresponding reference pages to troubleshoot. These examples identify the most common print-quality problems. If you still have problems after trying the suggested remedies, contact HP Customer Support. (See
The examples below depict letter-size paper that has passed through the printer short-edge first.
128 Chapter 4 Problem solving ENWW
See
See
See
See
See
A
A
A
A
A a a a a a
B
B
B
B
B b b b b b C c c c c
C
C
C
C c
See
Dear Mr. Abhjerhjk,
The dhjhfiuhu if teint hhkjhjnf j us a weue jd, fnk ksneh vnk kjdfkaakd ss hsjhnckkajhdhf kashfhnduujdn.
Pkshkkhklhlkhkhyufwe4yrh9jjflkln djd skshkshdcnksnjcnal aksnclnslskjlncsl nas lnslna, ncnsljsjscljckn nsnclknsllj hwlsdknls nwljs nlnscl nijhsn clsncij hn. Iosi fsjs jlkh andjna this is a hn. jns fir stie a djakjd ajjssk. Thsi ius vnvlu tyeh lch afted, and when hghj hgjhk jdj a dt sonnleh.
Suolklv jsdj hvjkrt ten sutc of jthjkfjkn vjdj hwjd, an olk d
.at fhjdjht ajshef. Sewlfl nv atug ahgjfjknvr kdkjdh sj hvjk sjskrplo book. Camegajd sand their djnln as orged tyehha as as hf hv of the tinhgh in the cescmdal vlala tojk. Ho sn shj shjkh a sjca kvkjn? No ahdkj ahhtuah ahavjnv hv vh aefve r
Tehreh ahkj vaknihidh was skjsaa a dhkjfn anj cjkhapsldnlj llhfoihrfhthej ahjkkjna oa h j a kah w asj kskjnk as sa fjkank cakajhjkn eanjsdn qa ejhc pjtpvjlnv4purlaxnwl. Ana l, and the askeina of ahthvnasm. Sayhvjan tjhhjhr ajn ve fh k v nja vkfkahjd a. Smakkljl a sehiah adheufh if you do klakc k w vka ah call lthe cjakha aa d a sd fijs.
Sincerely,
Mr. Scmehnjcj
See
See
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
See
See
See
A a a a a
A
A
A
A a
B
B
B
B
B b b b b b
C c c c c
C
C
C
C c
See
ENWW
.
See
See
(dark)
See
(light)
Correcting print-quality problems 129
Light print (partial page)
1. Make sure that the print cartridge is fully installed.
2. The toner level in the print cartridge might be low. Replace the print cartridge.
3. The media might not meet HP specifications (for example, the paper is too moist or too
rough). See Paper specifications .
Light print (entire page)
1. Make sure that the print cartridge is fully installed.
2. Make sure that the EconoMode setting is turned off at the control panel and in the printer driver.
3. Open the Configure Device menu at the printer control panel. Open the Print Quality submenu and increase the TONER DENSITY setting. See
4. Try using a different type of paper.
5. The print cartridge might be almost empty. Replace the print cartridge.
Specks
Specks might appear on a page after a jam has been cleared.
1. Print a few more pages to see if the problem corrects itself.
2. Clean the inside of the printer and run a cleaning page to clean the fuser. (See
.)
3. Try using a different type of paper.
4. Check the print cartridge for leaks. If the print cartridge is leaking, replace it.
130 Chapter 4 Problem solving ENWW
Dropouts
1. Make sure that the environmental specifications for the printer are being met. (See
2. If the paper is rough, and the toner easily rubs off, open the Configure Device menu at the printer control panel. Open the Print Quality submenu, select FUSER MODES , and then select the paper type you are using. Change the setting to HIGH 1 or HIGH 2,
which helps the toner fuse more completely onto the paper. (See Print Quality submenu
.)
3. Try using a smoother paper.
Lines
A a a a a
A
A
A
A a
B
B
B
B
B b b b b b
C c c c c
C
C
C
C c
1. Print a few more pages to see if the problem corrects itself.
2. Clean the inside of the printer and run a cleaning page to clean the fuser. (See
.)
3. Replace the print cartridge.
Gray background
ENWW
1. Do not use paper that has already been run through the printer.
2. Try using a different type of paper.
3. Print a few more pages to see if the problem corrects itself.
4. Turn over the stack of paper in the tray. Also, try rotating the paper 180°.
5. Open the Configure Device menu at the printer control panel. On the Print Quality submenu, increase the TONER DENSITY
setting. See Print Quality submenu .
Correcting print-quality problems 131
6. Make sure that the environmental specifications for the printer are being met. (See
7. Replace the print cartridge.
Toner smear
1. Print a few more pages to see if the problem corrects itself.
2. Try using a different type of paper.
3. Make sure that the environmental specifications for the printer are being met. (See
4. Clean the inside of the printer and run a cleaning page to clean the fuser. (See
.)
5. Replace the print cartridge.
Loose toner
Loose toner, in this context, is defined as toner that can be rubbed off the page.
1. If paper is heavy or rough, open the Configure Device menu at the printer control panel.
On the Print Quality submenu, select FUSER MODES , and then select the paper type you are using. Change the setting to HIGH 1 or HIGH 2, which helps the toner fuse more completely onto the paper. (See
Print Quality submenu .) You must also set the type of
paper for the tray you are using. (See Printing by type and size of media (locking trays) .)
2. If you have observed a rougher texture on one side of your paper, try printing on the smoother side.
3. Make sure that the environmental specifications for the printer are being met. (See
4. Make sure that type and quality of the paper you are using meet HP specifications. (See
132 Chapter 4 Problem solving ENWW
Repeating defects
ENWW
1. Print a few more pages to see if the problem corrects itself.
2. If the distance between defects is 38 mm (1.5 inches), 47 mm (1.85 inches), or 94 mm
(3.7 inches), the print cartridge might need to be replaced.
3. Clean the inside of the printer and run a cleaning page to clean the fuser. (See
.)
Repeating image
Dear Mr. Abhjerhjk,
The dhjhfiuhu if teint hhkjhjnf j us a weue jd, fnk ksneh vnk kjdfkaakd ss hsjhnckkajhdhf kashfhnduujdn.
Pkshkkhklhlkhkhyufwe4yrh9jjflkln djd skshkshdcnksnjcnal aksnclnslskjlncsl nas lnslna, ncnsljsjscljckn nsnclknsllj hwlsdknls nwljs nlnscl nijhsn clsncij hn. Iosi fsjs jlkh andjna this is a hn. jns fir stie a djakjd ajjssk. Thsi ius vnvlu tyeh lch afted, and when hghj hgjhk jdj a dt sonnleh.
Suolklv jsdj hvjkrt ten sutc of jthjkfjkn vjdj hwjd, an olk d
.at fhjdjht ajshef. Sewlfl nv atug ahgjfjknvr kdkjdh sj hvjk sjskrplo book. Camegajd sand their djnln as orged tyehha as as hf hv of the tinhgh in the cescmdal vlala tojk. Ho sn shj shjkh a sjca kvkjn? No ahdkj ahhtuah ahavjnv hv vh aefve r
Tehreh ahkj vaknihidh was skjsaa a dhkjfn anj cjkhapsldnlj llhfoihrfhthej ahjkkjna oa h j a kah w asj kskjnk as sa fjkank cakajhjkn eanjsdn qa ejhc pjtpvjlnv4purlaxnwl. Ana l, and the askeina of ahthvnasm. Sayhvjan tjhhjhr ajn ve fh k v nja vkfkahjd a. Smakkljl a sehiah adheufh if you do klakc k w vka ah call lthe cjakha aa d a sd fijs.
Sincerely,
Mr. Scmehnjcj
This type of defect might occur when using preprinted forms or a large quantity of narrow paper.
1. Print a few more pages to see if the problem corrects itself.
2. Make sure that type and quality of the paper you are using meet HP specifications. (See
3. If the distance between defects is 38 mm (1.5 inches), 47 mm (1.85 inches), or 94 mm
(3.7 inches), the print cartridge might need to be replaced.
Misformed characters
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
1. Print a few more pages to see if the problem corrects itself.
2. Make sure that the environmental specifications for the printer are being met. (See
Correcting print-quality problems 133
Page skew
1. Print a few more pages to see if the problem corrects itself.
2. Verify that there are no torn pieces of paper inside the printer.
3. Make sure that paper is loaded correctly and that all adjustments have been made. (See
Loading trays .) Make sure that the guides in the tray are not too tight or too loose
against the paper.
4. Turn over the stack of paper in the tray. Also, try rotating the paper 180°.
5. Make sure that the type and quality of the paper you are using meet HP specifications.
(See
.)
6. Make sure that the environmental specifications for the printer are being met. (See
Curl or wave
1. Turn over the stack of paper in the tray. Also, try rotating the paper 180°.
2. Make sure that the type and quality of the paper you are using meet HP specifications.
(See
.)
3. Make sure that the environmental specifications for the printer are being met. (See
4. Try printing to a different output bin.
5. If paper is lightweight and smooth, open the Configure Device menu at the printer control panel. On the Print Quality submenu, select FUSER MODES , and then select the paper type you are using. Change the setting to LOW , which helps reduce the heat in the fusing process. (See
.) You must also set the type of paper for the tray you are using. (See
Printing by type and size of media (locking trays) .)
134 Chapter 4 Problem solving ENWW
Wrinkles or creases
1. Print a few more pages to see if the problem corrects itself.
2. Make sure that the environmental specifications for the printer are being met. (See
3. Turn over the stack of paper in the tray. Also, try rotating the paper 180°.
4. Make sure that paper is loaded correctly and all adjustments have been made. (See
5. Make sure that the type and quality of the paper you are using meet HP specifications.
(See
.)
6. If envelopes are creasing, try storing envelopes so that they lie flat.
Vertical white lines
ENWW
1. Print a few more pages to see if the problem corrects itself.
2. Make sure that the type and quality of the paper you are using meet HP specifications.
(See
.)
3. Replace the print cartridge.
Tire tracks
A a a a a
A
A
A
A a
B
B
B
B
B b b b b b C c c c c
C
C
C
C c
This defect typically occurs when the print cartridge has far exceeded its rated life of 6,000
(Q6511A) or 12,000 (Q6511X) pages. For example, if you are printing a very large quantity of pages with very little toner coverage.
1. Replace the print cartridge.
Correcting print-quality problems 135
2. Reduce the number of pages that you print with very low toner coverage.
White spots on black
1. Print a few more pages to see if the problem corrects itself.
2. Make sure that the type and quality of the paper you are using meet HP specifications.
(See
.)
3. Make sure that the environmental specifications for the printer are being met. (See
4. Replace the print cartridge.
Scattered lines
1. Make sure that the type and quality of the paper you are using meet HP specifications.
(See
.)
2. Make sure that the environmental specifications for the printer are being met. (See
3. Turn over the stack of paper in the tray. Also, try rotating the paper 180°.
4. Open the Configure Device menu at the printer control panel. Open the Print Quality submenu and change the TONER DENSITY
setting. (See Print Quality submenu .)
5. Open the Configure Device menu at the printer control panel. On the Print Quality submenu, open OPTIMIZE and set LINE DETAIL=ON .
Blurred print
136 Chapter 4 Problem solving ENWW
1. Make sure that the type and quality of the paper you are using meet HP specifications.
(See
.)
2. Make sure that the environmental specifications for the printer are being met. (See
3. Turn over the stack of paper in the tray. Also, try rotating the paper 180°.
4. Do not use paper that already has been run through the printer.
5. Decrease the toner density. Open the Configure Device menu at the printer control panel. Open the Print Quality submenu and change the TONER DENSITY setting. (See
.)
6. Open the Configure Device menu at the printer control panel. On the Print Quality submenu, open OPTIMIZE and set HIGH TRANSFER=ON . (See
Random image repetition
ENWW
If an image that appears at the top of the page (in solid black) repeats further down the page
(in a gray field), the toner might not have been completely erased from the last job. (The repeated image might be lighter or darker than the field it appears in.)
● Change the tone (darkness) of the field that the repeated image appears in.
● Change the order in which the images are printed. For example, have the lighter image at the top of the page, and the darker image farther down the page.
● From your software application, rotate the whole page 180° to print the lighter image first.
● If the defect occurs later in a print job, turn the printer power off for 10 minutes, and then turn the printer power on to restart the print job.
Correcting print-quality problems 137
Troubleshooting network printing problems
NOTE HP recommends that you use the printer CD-ROM to install and set up the printer on a network.
●
Print a configuration page (see Configuration page
). If an HP Jetdirect print server is installed, printing a configuration page also prints a second page that shows the network settings and status.
● See the HP Jetdirect Print Server Administrator's Guide on the printer CD-ROM for help and for more information about the Jetdirect configuration page. To reach the guide, select the appropriate print server series, select the appropriate print server product, and then click troubleshoot a problem .
● Try printing the job from another computer.
● To verify that a printer works with a computer, use a parallel or USB cable to connect it directly to a computer. You will have to reinstall the printing software. Print a document from a program that has printed correctly in the past. If this works, a problem with the network might exist.
● Contact your network administrator for assistance.
138 Chapter 4 Problem solving ENWW
Troubleshooting common Windows problems
Error message:
"Error Writing to LPTx" in Windows 9x.
Cause
Media is not loaded.
The cable is defective or loose.
The printer is plugged into a power strip and is not receiving enough power.
The input/output setting is incorrect.
Solution
Make sure that paper or other print media is loaded in the trays.
Make sure that the cables are connected correctly, the printer is on, and the Ready light is on.
Unplug the power cord from the power strip and plug it into another electrical outlet.
Click Start , click Settings , and then click
Printers . Right-click the HP LaserJet 2400 series printer driver and select Properties . Click
Details and then click Port Settings . Click to clear the check mark from the Check Port State before Printing box. Click OK . Click Spool
Setting and then click Print Directly to Printer .
Click OK .
Error message:
"General Protection FaultException OE"
"Spool32"
"Illegal Operation"
Cause Solution
Close all software programs, restart Windows, and try again.
Select a different printer driver. If the
HP LaserJet 2400 series PCL 6 driver is selected, switch to a PCL 5e or PS printer driver.
You can usually do this from a software program.
Delete all temp files from the Temp subdirectory.
You can determine the name of the directory by editing the AUTOEXEC.BAT file and looking for the statement "Set Temp =". The name after this statement is the temp directory. It is usually C:
\TEMP by default, but can be redefined.
See the Microsoft Windows documentation that came with your computer for more information about Windows error messages.
ENWW Troubleshooting common Windows problems 139
Troubleshooting common Macintosh problems
NOTE
In addition to the problems that are listed in Solving general printing problems
, this section lists problems that can occur when using Mac OS 9.
x , or Mac OS X.
Setup for USB and IP printing is performed through the Desktop Printer Utility . The printer will not appear in the Chooser.
Problems with Mac OS 9.x
The printer name or IP address does not show or verify in the Desktop Printer Utility.
Cause Solution
The printer might not be ready.
The wrong connection type might be selected.
Make sure that the cables are connected correctly, the printer is on, and the ready light is on. If you are connecting through a USB or Ethernet hub, try connecting directly to the computer or use a different port.
Make sure that Printer (USB) or Printer (LPR) is selected in the Desktop Printer Utility , depending on the type of connection that exists between the printer and the computer.
The wrong printer name or IP address is being used.
The interface cable might be defective or of poor quality.
Check the printer name or IP address by printing a
configuration page. See Configuration page . Verify that the
printer name or IP address on the configuration page matches the printer name or IP address in the Desktop
Printer Utility .
Replace the interface cable. Make sure to use a high-quality cable.
The PostScript Printer Description (PPD) file for the printer does not appear as a selection in the Desktop Printer
Utility.
Cause Solution
The printer software might not have been installed or was installed incorrectly.
The PostScript Printer Description (PPD) file is corrupt.
Make sure that the HP LaserJet 2400 series PPD is in the following hard drive folder:
System Folder/Extensions/
Printer Descriptions
. If necessary, reinstall the software. See the getting started guide for instructions.
Delete the PPD file from the following hard drive folder:
System Folder/Extensions/Printer
Descriptions
. Reinstall the software. See the getting started guide for instructions.
A print job was not sent to the printer that you wanted.
Cause
The print queue might be stopped.
Solution
Restart the print queue. Open the Printing menu in the top menu bar and click Start Print Queue .
140 Chapter 4 Problem solving ENWW
Problems with Mac OS 9.x (continued)
A print job was not sent to the printer that you wanted.
Cause
The wrong printer name or IP address is being used.
Another printer that has the same or a similar name or IP address might have received your print job.
The printer might not be ready.
The interface cable might be defective or of poor quality.
Solution
Check the printer name or IP address by printing a
configuration page. See Configuration page . Verify that the
printer name or IP address on the configuration page matches the printer name or IP address in the Desktop
Printer Utility .
Make sure that the cables are connected correctly, the printer is on, and the ready light is on. If you are connecting through a USB or Ethernet hub, try connecting directly to the computer or use a different port.
Replace the interface cable. Make sure to use a high-quality cable.
You cannot use the computer while the printer is printing.
Cause Solution
Background Printing has not been selected.
For LaserWriter 8.6 and later: Turn Background Printing on by selecting Print Desktop on the File menu and then clicking Background Printing .
An encapsulated PostScript (EPS) file does not print with the correct fonts.
Cause Solution
This problem occurs with some programs.
● Try downloading the fonts that are contained in the EPS file to the printer before printing.
● Send the file in ASCII format instead of binary encoding.
Your document is not printing with New York, Geneva, or Monaco fonts.
Cause Solution
The printer might be substituting fonts.
Click Options in the Page Setup dialog box to clear substituted fonts.
You are unable to print from a third-party USB card.
Cause
This error occurs when the software for USB printers is not installed.
Solution
When adding a third-party USB card, you might need the
Apple USB Adapter Card Support software. The most current version of this software is available from the Apple
Web site.
ENWW Troubleshooting common Macintosh problems 141
Problems with Mac OS 9.x (continued)
When connected with a USB cable, the printer does not appear in the Desktop Printer Utility or the Apple System
Profiler after the driver is selected.
Cause
This problem is caused by either a software or hardware component.
Solution
Software troubleshooting
● Check that your Macintosh supports USB.
● Verify that your Macintosh operating system is Mac OS
9.1 or later.
● Ensure that your Macintosh has the appropriate USB software from Apple.
NOTE
The iMac and Blue G3 desktop Macintosh systems meet all of the requirements to connect to a USB device.
Hardware troubleshooting
● Check that the printer is turned on.
● Verify that the USB cable is connected correctly.
● Check that you are using the appropriate high-speed
USB cable.
● Ensure that you do not have too many USB devices drawing power from the chain. Disconnect all of the devices from the chain and connect the cable directly to the USB port on the host computer.
● Check to see if more than two nonpowered USB hubs are connected in a row on the chain. Disconnect all of the devices from the chain and connect the cable directly to the USB port on the host computer.
NOTE
The iMac keyboard is a nonpowered USB hub.
Problems with Mac OS X
The printer driver is not listed in Print Center.
Cause
The printer software might not have been installed or was installed incorrectly.
The Postscript Printer Description (PPD) file is corrupt.
Solution
Make sure that the HP LaserJet 2400 series PPD is in the following hard drive folder:
Library/Printers/PPDs/
Contents/Resources/<lang>.lproj
, where “<lang>” represents the two-letter language code for the language that you are using. If necessary, reinstall the software. See the getting started guide for instructions.
Delete the PPD file from the following hard drive folder:
Library/Printers/PPDs/Contents/Resources/
<lang>.lproj
, where “<lang>” represents the two-letter language code for the language that you are using. Reinstall the software. See the getting started guide for instructions.
142 Chapter 4 Problem solving ENWW
Problems with Mac OS X (continued)
The printer name, IP address, or Rendezvous host name does not appear in the printer list box in the print center.
Cause
The printer might not be ready.
The wrong connection type might be selected.
The wrong printer name, IP address, or Rendezvous host name is being used.
The interface cable might be defective or of poor quality.
Solution
Make sure that the cables are connected correctly, the printer is on, and the ready light is on. If you are connecting through a USB or Ethernet hub, try connecting directly to the computer or use a different port.
Make sure that USB, IP Printing, or Rendezvous is selected, depending on the type of connection that exists between the printer and the computer.
Check the printer name, IP address, or Rendezvous host name by printing a configuration page See
Configuration page . Verify that the name, IP address, or Rendezvous host
name on the configuration page matches the printer name,
IP address, or Rendezvous host name in the Print Center.
Replace the interface cable. Make sure to use a high-quality cable.
The printer driver does not automatically set up your selected printer in Print Center.
Cause Solution
The printer might not be ready.
The printer software might not have been installed or was installed incorrectly.
Make sure that the cables are connected correctly, the printer is on, and the ready light is on. If you are connecting through a USB or Ethernet hub, try connecting directly to the computer or use a different port.
Make sure that the HP LaserJet 2400 series PPD is in the following hard drive folder:
Library/Printers/PPDs/
Contents/Resources/<lang>.lproj
, where “<lang>” represents the two-letter language code for the language that you are using. If necessary, reinstall the software. See the getting started guide for instructions.
The Postscript Printer Description (PPD) file is corrupt.
The printer might not be ready.
The interface cable might be defective or of poor quality.
Delete the PPD file from the following hard drive folder:
Library/Printers/PPDs/Contents/Resources/
<lang>.lproj
, where “<lang>” represents the two-letter language code for the language that you are using. Reinstall the software. See the getting started guide for instructions.
Make sure that the cables are connected correctly, the printer is on, and the ready light is on. If you are connecting through a USB or Ethernet hub, try connecting directly to the computer or use a different port.
Replace the interface cable. Make sure to use a high-quality cable.
A print job was not sent to the printer that you wanted.
Cause
The print queue might be stopped.
Solution
Restart the print queue. Open print monitor and select
Start Jobs .
ENWW Troubleshooting common Macintosh problems 143
Problems with Mac OS X (continued)
A print job was not sent to the printer that you wanted.
Cause Solution
The wrong printer name or IP address is being used.
Another printer with the same or similar name, IP address, or Rendezvous host name might have received your print job.
Check the printer name, IP address, or Rendezvous host name by printing a configuration page See
Configuration page . Verify that the name, IP address, or Rendezvous host
name on the configuration page matches the printer name,
IP address, or Rendezvous host name in the Print Center.
An encapsulated PostScript (EPS) file does not print with the correct fonts.
Cause Solution
This problem occurs with some programs.
● Try downloading the fonts that are contained in the EPS file to the printer before printing.
● Send the file in ASCII format instead of binary encoding.
You are unable to print from a third-party USB card.
Cause
This error occurs when the software for USB printers is not installed.
Solution
When adding a third-party USB card, you might need the
Apple USB Adapter Card Support software. The most current version of this software is available from the Apple
Web site.
144 Chapter 4 Problem solving ENWW
Problems with Mac OS X (continued)
When connected with a USB cable, the printer does not appear in the Macintosh Print Center after the driver is selected.
Cause
This problem is caused by either a software or a hardware component.
Solution
Software troubleshooting
● Check that your Macintosh supports USB.
● Verify that your Macintosh operating system is Mac OS
X version 10.1 or later.
● Ensure that your Macintosh has the appropriate USB software from Apple.
Hardware troubleshooting
● Check that the printer is turned on.
● Verify that the USB cable is connected correctly.
● Check that you are using the appropriate high-speed
USB cable.
● Ensure that you do not have too many USB devices drawing power from the chain. Disconnect all of the devices from the chain, and connect the cable directly to the USB port on the host computer.
● Check to see if more than two nonpowered USB hubs are connected in a row on the chain. Disconnect all of the devices from the chain and connect the cable directly to the USB port on the host computer.
NOTE
The iMac keyboard is a nonpowered USB hub.
ENWW Troubleshooting common Macintosh problems 145
Troubleshooting common PostScript problems
NOTE
The following situations are specific to the PostScript (PS) language and might occur when several printer languages are being used. Check the control-panel display for messages that might help resolve problems.
To receive a printed or screen message when PS errors occur, open the Print Options dialog box and click the selection next to the PS Errors section that you want.
General problems
The job prints in Courier (the printer's default typeface) instead of the typeface that you requested.
Cause
The requested typeface is not downloaded.
Solution
Download the font that you want and send the print job again. Verify the type and location of the font. Download the font to the printer if applicable. Check the software documentation for more information.
A legal page prints with clipped margins.
Cause
The print job was too complex.
Solution
You might need to print your job at 600 dots per inch, reduce the complexity of the page, or install more memory.
A PS error page prints.
Cause
The print job might not be PS.
Solution
Make sure that the print job is a PS job. Check to see whether the software application expected a setup or PS header file to be sent to the printer.
Specific errors
Limit Check Error
Cause
The print job was too complex.
Solution
You might need to print your job at 600 dots per inch (dpi), reduce the complexity of the page, or install more memory.
146 Chapter 4 Problem solving ENWW
VM Error
Cause
A font error occurred.
Range Check
Cause
A font error occurred.
Solution
Select unlimited downloadable fonts from the printer driver.
Solution
Select unlimited downloadable fonts from the printer driver.
ENWW Troubleshooting common PostScript problems 147
148 Chapter 4 Problem solving ENWW
A
Supplies and accessories
This section provides information about ordering parts, supplies, and accessories. Use only parts and accessories that are specifically designed for this printer.
●
Ordering parts, accessories, and supplies
●
ENWW 149
Ordering parts, accessories, and supplies
Several methods are available for ordering parts, supplies, and accessories:
●
●
Ordering through service or support providers
●
Ordering directly through the embedded Web server (for printers that are connected to a network)
●
Ordering directly from HP
You can obtain the following directly from HP:
● Replacement parts To order replacement parts in the U.S. see http://www.hp.com/go/ hpparts/ . Outside the United States, order parts by contacting your local authorized
HP service center.
● Supplies and accessories To order supplies in the U.S., see http://www.hp.com/go/ ljsupplies . To order supplies worldwide, see http://www.hp.com/ghp/buyonline.html
. To
order accessories, see www.hp.com/support/lj2410 ,
http://www.hp.com/support/lj2420 , or http://www.hp.com/support/lj2430 .
Ordering through service or support providers
To order a part or accessory, contact an HP-authorized service or support provider. (See
.)
Ordering directly through the embedded Web server (for printers that are connected to a network)
Use the following steps to order printing supplies directly through the embedded Web server.
(See
Using the embedded Web server for an explanation of this feature.)
To order directly through the embedded Web server
1. In the Web browser on the computer, type the IP address for the printer. The printer status window appears.
2. Select the Setting tab at the top of the window.
3. If asked to provide a password, type the password.
4. On the left side of the Device Configuration window, double-click Order Supplies . This provides a URL from which to purchase consumables. Supplies information with part numbers and printer information is provided.
5. Select the part numbers that you want to order and follow the instructions on the screen.
150 Appendix A Supplies and accessories ENWW
Ordering directly through the HP Toolbox software (for printers that are directly connected to a computer)
The HP Toolbox software gives you the ability to order supplies and accessories directly from the computer. To order supplies by using the HP Toolbox, click Toolbox Links , and then click Order Supplies . A link is provided to the HP Web site for ordering supplies.
ENWW Ordering parts, accessories, and supplies 151
Part numbers
The following list of accessories was current at the time of printing. Ordering information and availability of the accessories might change during the life of the printer.
Paper-handling accessories
Item
Optional 500-sheet tray and feeder unit
Description
Optional tray to increase paper capacity. Holds Letter, A4,
Legal, A5, B5 (JIS), Executive, and 8.5 x 13 inch paper sizes.
Note: This tray is included with the HP LaserJet 2430t, 2430tn, and 2430dtn models.
Part number
Q5963A
Print cartridges
Item
HP LaserJet print cartridge
Description
6,000-page cartridge
12,000-page cartridge
Memory
Item
100-pin DDR memory DIMM
(dual inline memory module)
Boosts the ability of the printer to handle large or complex print jobs.
Description
32 MB
48 MB
64 MB
128 MB
256 MB
Part number
Q6511A
Q6511X
Part number
Q3982A
Q6007A
Q2625A
Q2626A
Q2627A
152 Appendix A Supplies and accessories ENWW
ENWW
Cables and interfaces
Item
Enhanced I/O (EIO) cards
HP Jetdirect print server multiprotocol EIO network cards:
Parallel cables
USB cable
Description
HP Jetdirect 620n Fast
Ethernet (10/100Base-TX) print server
HP Jetdirect 680n 802.11b
wireless internal print server
HP Jetdirect Connectivity card for USB, serial, and LocalTalk connections
2-meter IEEE 1284-B cable
3-meter IEEE 1284-B cable
2-meter A to B cable
Part number
J7934A
J6058A
J4135A
C2950A
C2951A
C6518A
Print media
For more information about media supplies, go to http://www.hp.com/go/ljsupplies .
Item
HP Soft Gloss laser paper
For use with HP LaserJet printers. Coated paper, good for business documents with high impact, such as brochures, sales material, and documents with graphics and photographic images.
Specifications: 32 lb (120 g/m 2 ).
Description
Letter (220 x 280 mm),
50 sheets/box
A4 (210 x 297 mm), 50 sheets/ box
HP LaserJet tough paper
For use with HP LaserJet printers. This satin-finish paper is waterproof and tear-proof, yet doesn't compromise on print quality or performance.
Use it for signs, maps, menus, and other business applications.
Letter (8.5 x 11 inch),
50 sheets to a carton
A4 (210 x 297 mm), 50 sheets to a carton
Part number
C4179A/Asia-Pacific countries/ regions
C4179B/Asia-Pacific countries/ regions and Europe
Q1298A/North America
Q1298B/Asia-Pacific countries/ regions and Europe
Part numbers 153
Item
HP Premium Choice LaserJet paper
HP's brightest LaserJet paper.
Expect spectacular color and crisp black from this paper that is extra smooth and brilliantly white. Ideal for presentations, business plans, external correspondence and other highvalue documents
Specifications: 98 bright, 32 lb.
(75 g/m 2 ).
HP LaserJet paper
For use with HP LaserJet printers. Good for letterhead, high-value memos, legal documents, direct mail, and correspondence.
Specifications: 96 bright, 24 lb
(90 g/m 2 ).
HP Printing paper
For use with HP LaserJet and inkjet printers. Created especially for small and home offices. Heavier and brighter than copier paper.
Specifications: 92 bright, 22 lb.
Description
Letter (8.5 x 11 inch),
500 sheets/ream, 10-ream carton
Part number
HPU1132/North America
Letter (8.5 x 11 inch),
250 sheets/ream, 6-ream carton
HPU1732 North America
A4 (210 x 297 mm), 5-ream carton
A4 (210 x 297 mm), 250 sheet/ ream, 5-ream carton
Q2397A/Asia-Pacific countries/ regions
CHP412/Europe
CHP410/Europe A4 (210 x 297 mm), 500 sheet/ ream, 5-ream carton
A4 (210 x 297 mm), 160 g/m 2 ,
500 sheet/ream, 5-ream carton
Letter (8.5 x 11 inch),
500 sheets/ream, 10-ream carton
Legal (8.5 x 14 inch),
500 sheets/ream, 10-ream carton
CHP413/Europe
HPJ1124/North America
HPJ1424/North America
A Letter (220 x 280 mm),
500 sheets/ream, 5-ream carton
Q2398A/Asia-Pacific countries/ regions
A4 (210 x 297 mm), 500 sheets/ ream, 5-ream carton
Q2400A/Asia-Pacific countries/ regions
A4 (210 x 297 mm), 500 sheets/ ream
CHP310/Europe
Letter (8.5 x 11 inch),
500 sheets/ream, 10-ream carton
HPP1122/North America and
Mexico
Letter (8.5 x 11 inch),
500 sheets/ream, 3-ream carton
HPP113R/North America
A4 (210 x 297 mm), 500 sheets/ ream, 5-ream carton
CHP210/Europe
A4 (210 x 297 mm), 300 sheets/ ream, 5-ream carton
CHP213/Europe
154 Appendix A Supplies and accessories ENWW
ENWW
Item
HP Multipurpose paper
For use with all office equipment-laser and inkjet printers, copiers, and fax machines. Created for businesses that want one paper for all their office needs.
Brighter and smoother than other office papers.
Specifications: 90 bright, 20 lb
(75 g/m 2 ).
HP Office paper
For use with all office equipment-laser and inkjet printers, copiers, and fax machines. Good for highvolume printing.
Specifications: 84 bright, 20 lb
(75 g/m 2 ).
Description Part number
Letter (8.5 x 11 inch),
500 sheets/ream, 10-ream carton
Letter (8.5 x 11 inch),
500 sheets/ream, 5-ream carton
Letter (8.5 x 11 inch),
250 sheets/ream, 12-ream carton
Letter (8.5 x 11 inch), 3-hole,
500 sheets/ream, 10-ream carton
Legal (8.5 x 14 inch),
500 sheets/ream, 10-ream carton
HPM1120/North America
HPM115R/North America
HP25011/North America
HPM113H/North America
HPM1420/North America
HPC8511/North America and
Mexico
Letter (8.5 x 11 inch),
500 sheets/ream, 10-ream carton
Letter (8.5 x 11 inch), 3-hole,
500 sheets/ream, 10-ream carton
HPC3HP/North America
Legal (8.5 x 14 inch),
500 sheets/ream, 10-ream carton
Letter (8.5 x 11 inch), Quick
Pack; 2,500-sheet carton
HPC8514/North America
HP2500S/North America and
Mexico
Letter (8.5 x 11 inch), Quick
Pack 3-hole; 2,500-sheet carton
HP2500P/North America
A Letter (220 x 280 mm),
500 sheets/ream, 5-ream carton
Q2408A/Asia-Pacific countries/ regions
A4 (210 x 297 mm), 500 sheets/ ream, 5-ream carton
Q2407A/Asia-Pacific countries/ regions
A4 (210 x 297 mm), 500 sheets/ ream, 5-ream carton
CHP110/Europe
A4 (210 x 297 mm), Quick
Pack; 2500 sheets/ream, 5ream carton
CHP113/Europe
Part numbers 155
Item
HP Office recycled paper
For use with all office equipment-laser and inkjet printers, copiers, and fax machines. Good for highvolume printing.
Satisfies U.S. Executive
Order 13101 for environmentally preferable products.
Specifications: 84 bright, 20 lb,
30% post-consumer content.
Description
Letter (8.5 x 11 inch),
500 sheets/ream, 10-ream carton
Letter (8.5 x 11 inch), 3-hole,
500 sheets/ream, 10-ream carton
Legal (8.5 x 14 inch),
500 sheets/ream, 10-ream carton
HP LaserJet transparencies
For use only with HP LaserJet monochrome printers. For crisp, sharp text and graphics, rely on the only transparencies specifically designed and tested to work with monochrome HP LaserJet printers.
Specifications: 4.3-mil thickness.
Letter (8.5 x 11 inch),
50 sheets to a carton
A4 (210 x 297 mm), 50 sheets to a carton
Part number
HPE1120/North America
HPE113H/North America
HPE1420/North America
92296T/North America, Asia-
Pacific countries/regions, and
Europe
922296U/Asia-Pacific countries/ regions and Europe
156 Appendix A Supplies and accessories ENWW
B
Control panel menus
You can perform most routine printing tasks from the computer by using the program or printer driver. These two methods are the most convenient way to control the printer, and they will override the printer-control-panel settings. See the Help file for your program, or, for more information about gaining access to the printer driver, see
You can also control the printer by changing settings at the printer control panel. Use the control panel to gain access to printer features that are not supported by the program or printer driver.
You can print a menu map at the printer control panel that shows the settings with the
currently selected values (see Menu map
. The sections that follow list the settings and possible values. In the Values column, the default value for each setting is the one with an asterisk (*) next to it.
Some menus or menu items appear only if certain options are installed in the printer.
This section explains the following menus:
●
●
●
●
●
●
ENWW 157
Retrieve Job menu
NOTE
This menu provides a list of the stored jobs in the printer and access to all the job storage features. You can print or delete these jobs at the printer control panel. See
Using jobstorage features for more information about using this menu.
If you turn the printer power off, all stored jobs are deleted.
The section that follows lists the settings and possible values. In the Values column, the default value for each setting is the one with an asterisk (*) next to it.
Item
PRINT STORED JOB
LIST
Values
There is no value to select.
Explanation
Prints a page showing all jobs stored on the device.
158 Appendix B Control panel menus ENWW
ENWW
Item
[USERNAME]
Values
[JOBNAME]
ALL PRIVATE JOBS
NO STORED JOBS
Explanation
The name of the person who sent the job.
[JOBNAME] : The name of the job stored in the printer. Select one of your jobs or all of your private jobs (those that were assigned a PIN in the printer driver).
● Print : Prints the selected job. PIN REQUIRED TO
PRINT: A prompt that appears for jobs that were assigned a personal identification number (PIN) in the printer driver. You must enter the PIN to print the job. COPIES: You can select the number of copies that you want to print ( 1 to 32000 ).
● Delete : Deletes the selected job from the printer. PIN REQUIRED
TO DELETE : A prompt that appears for jobs that were assigned a PIN in the printer driver. You must enter the PIN to delete the job.
ALL PRIVATE JOBS : Appears if two or more private jobs are stored in the printer. Selecting this item prints all of the private jobs that are stored in the printer for that user, after the correct PIN is entered.
NO STORED JOBS : Indicates that no stored jobs are available to print or delete.
Retrieve Job menu 159
Information menu
The Information menu contains printer information pages that give details about the printer and its configuration. Scroll to the information page that you want, and then press ( S
ELECT button).
Item
PRINT MENU MAP
CONFIGURATION
PRINT SUPPLIES
STATUS PAGE
PRINT USAGE
PRINT FILE
DIRECTORY
PRINT PCL FONT
LIST
PRINT PS FONT
LIST
Explanation
The menu map shows the layout and current settings of the printer control panel menu items.
For more information, see Menu map .
The configuration page shows the current printer configuration. If an HP Jetdirect print server is installed, an HP Jetdirect configuration page will print out as well. For more information, see
The supplies status page shows the levels of the supplies for the printer, calculation of the number of pages remaining, and cartridge-usage information. This page is available only if you are using genuine HP supplies. For more
information, see Supplies status page .
The usage page shows the quantity of pages printed, as well as the paper source used. It also shows the number of one-sided versus twosided pages that have been printed.
NOTE
This item appears only if a mass-storage device that contains a recognized file system is installed in the printer, such as an optional CompactFlash card. This item generates a page containing information that can be used for accounting purposes.
This item appears only if a mass-storage device that contains a recognized file system is installed in the printer, such as an optional CompactFlash card. The file directory shows information for all installed mass-storage devices. For more
information, see Printer memory .
The PCL font list shows all the PCL fonts that are currently available to the printer. For more
information, see PS or PCL font list .
The PS font list shows all the PS fonts that are currently available to the printer. For more
information, see PS or PCL font list .
160 Appendix B Control panel menus ENWW
Paper Handling menu
If paper-handling settings are correctly configured at the printer control panel, you can print by selecting the type and size of media in the program or the printer driver. For more information about configuring for media types and sizes, see
Supported types and sizes of print media
and
.
Some items on this menu (such as duplex and manual feed) are available in the program or the printer driver (if the appropriate driver is installed). Program and printer-driver settings override control-panel settings. For more information, see
The following table lists the settings and possible values. In the Values column, the default value for each setting is the one that has an asterisk (*) next to it.
Item
TRAY 1 SIZE
Values
*ANY SIZE
LETTER
LEGAL
EXECUTIVE
A4
A5
B5 (JIS)
EXECUTIVE (JIS)
D POSTCARD (JIS)
16K
ENVELOPE #10
ENVELOPE MONARCH
ENVELOPE C5
ENVELOPE DL
ENVELOPE B5
CUSTOM
ANY CUSTOM
Explanation
Use this item to set the value to correspond with the media size that is currently loaded in tray 1.
ANY SIZE : If both the type and size for tray 1 are set to
ANY, the printer will pull media from tray 1 first if media is loaded in the tray.
A size other than ANY SIZE :
The printer does not pull from this tray unless the type or size of the print job matches the type or size that is loaded in this tray.
ENWW Paper Handling menu 161
Item
TRAY 1 TYPE
TRAY 2 SIZE
TRAY 2 TYPE
Values
*ANY TYPE
PLAIN
PREPRINTED
LETTERHEAD
TRANSPARENCY
PREPUNCHED
LABELS
BOND
RECYCLED
COLOR
CARDSTOCK
>164 G/M2
ROUGH
ENVELOPE
*ANY SIZE
LETTER
LEGAL
EXECUTIVE
A4
A5
B5 (JIS)
EXECUTIVE (JIS)
*ANY TYPE
PLAIN
PREPRINTED
LETTERHEAD
TRANSPARENCY
PREPUNCHED
LABELS
BOND
RECYCLED
COLOR
CARDSTOCK
>164 G/M2
ROUGH
Explanation
Use this item to set the value to correspond with the type of media that is currently loaded in tray 1.
ANY TYPE : If both the type and size for tray 1 are set to
ANY, the printer will pull media from tray 1 first if media is loaded in the tray.
A type other than ANY TYPE :
The printer does not pull from this tray unless the type or size of the print job matches the type or size that is loaded in this tray.
Sets the value to correspond with the media size that is currently loaded in tray 2.
Sets the value to correspond with the media type that is currently loaded in tray 2.
162 Appendix B Control panel menus ENWW
ENWW
Item
TRAY 3 SIZE
TRAY 3 TYPE
Values
*ANY SIZE
LETTER
LEGAL
EXECUTIVE
A4
A5
B5 (JIS)
EXECUTIVE (JIS)
*ANY TYPE
PLAIN
PREPRINTED
LETTERHEAD
TRANSPARENCY
PREPUNCHED
LABELS
BOND
RECYCLED
COLOR
CARDSTOCK
>164 G/M2
ROUGH
Explanation
Sets the value to correspond with the media size that is currently loaded in tray 3.
Sets the value to correspond with the media type that is currently loaded in tray 3.
Paper Handling menu 163
Item
TRAY [N] CUSTOM
Values
UNIT OF MEASURE
X DIMENSION
Y DIMENSION
Explanation
This item appears only if a tray is set to a custom size.
UNIT OF MEASURE : Use this option to select the unit of measure ( INCHES or
MILLIMETERS )to use when you set custom paper sizes for the specified tray.
X DIMENSION : Use this item to set the measurement of the width of the paper
(measurement from side to side in the tray). The options are 3.0 to 8.50 INCHES or 76 to 216 MM .
Y DIMENSION : Use this item to set the measurement of the length of the paper
(measurement from front to back in the tray). The options are 5.0 to 14.00 INCHES or
127 to 356 MM .
After the Y DIMENSION value is selected, a summary screen appears. This screen contains feedback that summarizes all of the information that was specified on the previous three screens, such as TRAY 1
SIZE= 8.50 x 14 INCHES,
Setting saved.
164 Appendix B Control panel menus ENWW
Configure Device menu
This menu contains administrative functions.
●
●
●
●
●
Printing submenu
Some items on this menu are available in the program or printer driver (if the appropriate driver is installed). Program and printer-driver settings override control-panel settings. In general, it is better to change these settings in the printer driver, if applicable.
The following table lists the settings and possible values. In the Values column, the default value for each setting is the one with an asterisk ( * ) next to it.
Item
COPIES
Values
*1 to 32000
Explanation
Sets the default number of copies by selecting any number from 1 to 32000. Use ( U
P
button) or ( D
OWN
button) to select the number of copies. This setting applies only to print jobs that do not have the number of copies specified in the program or printer driver, such as a UNIX or
Linux application.
NOTE
It is best to set the number of copies in the program or printer driver. (Program and printerdriver settings override control-panel settings.)
ENWW Configure Device menu 165
Item
DEFAULT
PAPER SIZE
DEFAULT
CUSTOM PAPER
Values
*LETTER
LEGAL
EXECUTIVE
STATEMENT
8.5 x 13
A4
A5
B5 (JIS)
EXECUTIVE (JIS)
D POSTCARD (JIS)
16K
ENVELOPE #10
ENVELOPE
MONARCH
ENVELOPE C5
ENVELOPE DL
ENVELOPE B5
CUSTOM
UNIT OF MEASURE
X DIMENSION
Y DIMENSION
Explanation
Sets the default image size for paper and envelopes. (The item name changes from paper to envelope as you scroll through the available sizes.) This setting applies only to print jobs that do not have the paper size specified in the program or printer driver.
Sets a default custom paper size for tray 1. This menu appears only if the Custom-Standard switch in the selected tray is set to Custom.
PAPER DESTINATION *STANDARD OUTPUT
FACE UP BIN
DUPLEX
DUPLEX
BINDING
OVERRIDE
A4/LETTER
*OFF
ON
*LONG EDGE
SHORT EDGE
NO
*YES
Configures the output bin destination.
Appears only for printers that include a built-in duplexer. Set the value to ON to print on both sides (duplex) or OFF to print on one side
(simplex) of a sheet of paper.
Changes the binding edge for duplex printing.
The menu item appears only if the printer includes a built-in duplexer and DUPLEX=ON .
Allows the printer to print an A4-size job on lettersize paper if A4-size paper is not loaded in the printer (or vice versa).
MANUAL FEED
EDGE-TO-EDGE
OVERRIDE
*OFF
ON
*NO
YES
Feeds the paper manually from tray 1, rather than automatically from a tray. If
MANUAL FEED=ON and tray 1 is empty, the printer goes offline when it receives a print job.
MANUALLY FEED [PAPER SIZE] appears on the printer control-panel display.
Turns the edge-to-edge mode on or off for all print jobs.
166 Appendix B Control panel menus ENWW
Item
COURIER FONT
Values
*REGULAR
DARK
WIDE A4 *NO
YES
PRINT PS
ERRORS
*OFF
ON
Explanation
Selects the version of Courier font to use:
REGULAR : The internal Courier font available on the HP LaserJet 4 series printers.
DARK : The internal Courier font that is available on the HP LaserJet III series printers.
Changes the number of characters that can be printed on a single line of A4-size paper.
NO : Up to 78 10-pitch characters can be printed on one line.
YES : Up to 80 10-pitch characters can be printed on one line.
Determines whether a PS error page prints or not.
OFF : PS error page never prints.
ON : PS error page prints when PS errors occur.
ENWW Configure Device menu 167
Item
PCL
Values
COPIES
ORIENTATION
FONT SOURCE
FONT NUMBER
FONT PITCH
FONT POINT SIZE
SYMBOL SET
APPEND CR TO LF
SUPPRESS BLANK
PAGES
Explanation
COPIES : Sets vertical spacing from
5 to 128 lines for default paper size.
ORIENTATION : Allows you to select default page orientation as LANDSCAPE or PORTRAIT .
NOTE
It is best to set the page orientation in the program or printer driver. (Program and printerdriver settings override control-panel settings.)
FONT SOURCE : Allows you to select the font source as Internal , CARD SLOT 1, 2, or 3 ,
INTERNAL DISK , or EIO DISK 1, 2, or 3 .
FONT NUMBER : The printer assigns a number to each font and lists the numbers on the PCL
Font List. The font number appears in the Font # column of the printout.
FONT PITCH : Selects the font pitch. This item might not appear, depending on the font selected.
FONT POINT SIZE : Selects the font point size.
This appears only if a font with a scalable point size is selected as the default font.
SYMBOL SET : Selects any one of several available symbol sets at the printer control panel.
A symbol set is a unique grouping of all the characters in a font. PC-8 or PC-850 is recommended for line-draw characters.
APPEND CR TO LF : Select YES to append a carriage return to each line feed that the printer encountered in backward-compatible PCL jobs
(pure text, no job control). Some environments, such as UNIX, indicate a new line using only the line feed control code. This option allows you to append the required carriage return to each line feed.
SUPPRESS BLANK PAGES: When generating your own PCL, extra form feeds are included that would cause a blank page(s) to be printed.
Select YES for formfeeds to be ignored if the page is blank.
Print Quality submenu
Some items on this menu are available in the program or printer driver (if the appropriate driver is installed). Program and printer-driver settings override control-panel settings. For
more information, see Using the printer driver . In general, it is best to change these settings
in the printer driver, if applicable.
The following table lists the settings and possible values. In the Values column, the default value for each setting is the one with an asterisk (*) next to it.
168 Appendix B Control panel menus ENWW
Item
SET
REGISTRATION
Values
PRINT TEST PAGE
SOURCE
ADJUST TRAY [N]
Explanation
Shifts the margin alignment to center the image on the page from top to bottom, and left to right.
You can also align the image that is printed on the front with the image that is printed on the back.
PRINT TEST PAGE : Prints a test page that shows the current registration settings.
SOURCE : Selects the tray for which you want to print the test page.
ADJUST TRAY [N] : Sets the registration for the specified tray, where [N] is the number of the tray. A selection appears for each tray that is installed, and registration must be set for each tray.
● X1 SHIFT : Registration of the image on the paper from side to side, as the paper lies in the tray. For duplexing, this side is the second side (back) of the paper.
● X2 SHIFT : Registration of the image on the paper from side to side, as the paper lies in the tray, for the first side (front) of a duplexed page. This item appears only if the printer includes a built-in duplexer and
DUPLEX is ON. Set the X1 SHIFT first.
● Y SHIFT : Registration of the image on the paper from top to bottom as the paper lies in the tray.
ENWW Configure Device menu 169
Item
FUSER MODES
RESOLUTION
Values
PLAIN
PREPRINTED
LETTERHEAD
TRANSPARENCY
PREPUNCHED
LABELS
BOND
RECYCLED
COLOR
LIGHT 60-75 G/M2
CARDSTOCK
164-200 G/M2
ROUGH
ENVELOPE
RESTORE MODES
300
600
*FASTRES 1200
Explanation
Configures the fuser mode associated with each media type.
Change the fuser mode only if you are experiencing problems printing on certain media types. After you select a type of media, you can select a fuser mode that is available for that type. The printer supports the following modes:
NORMAL : Used for most types of paper.
HIGH 1 : Used for rough paper.
HIGH 2 : Used for paper that has a special or rough finish.
LOW 1 : Used for lightweight media. Use this mode if you are having problems with curled paper.
LOW 2 : Used for transparencies.
The default fuser mode is NORMAL for all print media types except transparencies ( LOW 2 ), and rough paper ( HIGH 1 ).
CAUTION
Do not change the fuser mode for transparencies. Failure to use the LOW 2 setting while printing transparencies can result in permanent damage to the printer and fuser.
Always select Transparencies as the Type in the printer driver and set the tray type at the printer control panel to TRANSPARENCY .
When selected, RESTORE MODES resets the fuser mode for each media type back to its default setting.
Selects the resolution. All values print at the same speed.
300 : Produces draft print quality and can be used for compatibility with the HP LaserJet III family of printers.
600 : Produces high print quality for text and can be used for compatibility with the HP LaserJet 4 family of printers.
FASTRES 1200 : Produces 1200-dpi print quality for fast, high-quality printing of business text and graphics.
NOTE
It is best to change the resolution in the program or printer driver. (Program and printer-driver settings override control-panel settings.)
170 Appendix B Control panel menus ENWW
ENWW
Item
RET
ECONOMODE
TONER
DENSITY
PROCESS
CLEANING PAGE
AUTO CLEANING
Values
OFF
LIGHT
*MEDIUM
DARK
ON
*OFF
1 to 5 (*3)
SMALL PAPER MODE *NORMAL
CREATE
CLEANING PAGE
SLOW
There is no value to select.
There is no value to select.
ON
*OFF
Explanation
Use the Resolution Enhancement technology
(REt) setting to produce print with smooth angles, curves, and edges.
REt does not affect print quality if the print resolution is set to FastRes 1200. All other print resolutions benefit from REt.
NOTE
It is best to change the REt setting in the program or printer driver. (Program and printerdriver settings override control-panel settings.)
Turn EconoMode ON (to save toner) or OFF (for high quality).
EconoMode creates draft-quality printing by reducing the amount of toner on the printed page.
NOTE
It is best to turn EconoMode on or off in the program or printer driver. (Program and printerdriver settings override control-panel settings.)
CAUTION
HP does not recommend full-time use of
EconoMode. If EconoMode is used full-time, it is possible that the toner supply will outlast the mechanical parts in the print cartridge.
Lighten or darken the print on the page by setting the toner density. Select a setting ranging from 1 (light) to 5 (dark). The default setting of
3 usually produces the best results.
When printing narrow media, the part of the fuser rollers that do not make contact with the media swell up and can cause wrinkles.
Press ( S
ELECT
button) to print a cleaning page
(for cleaning toner from the fuser). Open the rear output bin. Follow the instructions on the cleaning page. For more information, see
This item is available only after a cleaning page has been created. Follow the instructions that are printed on the cleaning page. The cleaning process might take up to 2.5 minutes.
Turns auto-cleaning on or off. When autocleaning is turned on, the printer will print a cleaning page when the page count reaches the value set in CLEANING INTERVAL .
Configure Device menu 171
Item Values
CLEANING INTERVAL *1000
2000
5000
10000
20000
Explanation
Sets the interval at which the auto cleaning is due for the printer.
System Setup submenu
Items on this menu affect printer behavior. Configure the printer according to your printing needs.
The following table lists the settings and possible values. In the Values column, the default value for each setting is the one with an asterisk ( * ) next to it.
Item
DATE/TIME
JOB STORAGE
LIMIT
JOB HELD
TIMEOUT
SHOW ADDRESS
Values
DATE
DATE FORMAT
TIME
TIME FORMAT
1 to 100 (*32)
*OFF
1 HOUR
4 HOURS
1 DAY
1 WEEK
*AUTO
OFF
Explanation
Sets the date and time settings.
Specifies the number of quick copy jobs that can be stored on the printer.
Sets the amount of time that held jobs are kept before being automatically deleted from the queue.
Defines whether or not the printer address will be shown on the display if the device is connected to a network. If AUTO is selected the
IP Address of the device appears with the
READY message.
172 Appendix B Control panel menus ENWW
ENWW
Item
TRAY
BEHAVIOR
SLEEP DELAY
Values
USE REQUESTED
TRAY
MANUALLY FEED
PROMPT
PS DEFER MEDIA
SIZE/TYPE PROMPT
1 MINUTE
15 MINUTES
*30 MINUTES
60 MINUTES
90 MINUTES
2 HOURS
4 HOURS
Explanation
USE REQUESTED TRAY : Determines whether the printer tries to pull paper from a different tray than the one that you selected in the printer driver.
● EXCLUSIVELY : Sets the printer to pull paper only from the tray that you selected and not pull from another tray, even if the tray that you selected is empty.
● FIRST : Sets the printer to pull from the tray that you selected first, but allows the printer to pull from another tray automatically if the tray that you selected is empty.
MANUALLY FEED PROMPT : Determines when the printer shows a prompt regarding pulling from tray 1 if your print job does not match the type or size that is loaded in any other tray.
● ALWAYS : Select this option if you always want to be prompted before the printer pulls from tray 1.
● UNLESS LOADED : Prompts you only if tray 1 is empty.
PS DEFER MEDIA : Controls whether the
PostScript (PS) or HP paper-handling model is used to print jobs. ENABLED causes PS to defer to the HP paper handling model.
DISABLED uses the PS paper handling model.
SIZE/TYPE PROMPT : Use this menu item to control whether the tray configuration message and its prompts are shown whenever a tray is opened and closed. These prompts instruct you to set the type or size if the tray is configured for a type or size other than the type or size that is loadeded in the tray.
Sets how long the printer remains idle before it enters Sleep mode.
Using Sleep mode offers does the following:
● Minimizes the amount of power that the printer consumes when it is idle
● Reduces wear on electronic components in the printer (turns off the display backlight, but the display is still readable)
The printer automatically comes out of Sleep mode when you send a print job, press a printer control panel button, open a tray, or open the top cover.
Configure Device menu 173
Item
PERSONALITY
CLEARABLE
WARNINGS
AUTO
CONTINUE
Values
*AUTO
PS
PCL
*JOB
ON
OFF
*ON
CARTRIDGE
LOW
STOP
*CONTINUE
Explanation
Selects the default printer language
(personality). The possible values are determined by which valid languages are installed in the printer.
Normally, you should not change the printer language. If you change it to a specific printer language, the printer will not switch automatically from one language to another unless specific software commands are sent to the printer.
Sets the amount of time that a clearable warning appears on the printer control-panel display.
JOB : The clearable warning message appears until the end of the job that generated the message.
ON : The clearable warning message appears until you press ( S
ELECT
button).
Determines how the printer reacts to errors. If the printer is on a network, you probably want to turn AUTO CONTINUE to ON .
ON : If an error occurs that prevents printing, the message appears on the printer control-panel display, and the printer goes offline for
10 seconds before returning online.
OFF : If an error occurs that prevents printing, the message remains on the printer control-panel display, and the printer remains offline until you press ( S
ELECT
button).
Determines how the printer behaves if the print cartridge is low. The message first appears when about 16% (6,000-page cartridge) or about
8% (12,000-page cartridge) of the life remains in the print cartridge. Print quality is not guaranteed if you print after receiving this message.
STOP : The printer pauses printing until you replace the print cartridge or press ( S
ELECT button) each time you turn the printer on. The message appears until you replace the print cartridge.
CONTINUE : The printer continues to print, and the message appears until you replace the print cartridge.
174 Appendix B Control panel menus ENWW
ENWW
Item
CARTRIDGE
OUT
JAM RECOVERY
RAM DISK
Values
STOP
*CONTINUE
*AUTO
OFF
ON
*AUTO
OFF
Explanation
Determines how the printer reacts if the print cartridge is empty.
STOP : The printer stops printing until you replace the print cartridge.
CONTINUE : The printer continues to print, and the REPLACE CARTRIDGE message appears until you replace the print cartridge. HP does not guarantee print quality if you select CONTINUE after a REPLACE CARTRIDGE condition.
Replace the print cartridge as soon as possible to ensure good print quality.
If the end of drum life is reached, the printer stops, regardless of the CARTRIDGE OUT setting.
Determines how the printer behaves if a jam occurs.
AUTO : The printer automatically selects the best mode for printer jam recovery (usually ON ).
OFF : The printer does not reprint pages following a jam. Printing performance might be increased with this setting.
ON : The printer automatically reprints pages after a jam is cleared.
Determines how the RAM disk is configured.
(This item does not apply to printers that have less than 48 MB of RAM.)
AUTO : Allows the printer to determine the optimal RAM-disk size based on the amount of available memory.
OFF : The RAM is disabled.
NOTE
If you change the setting from OFF to AUTO , the printer automatically reinitializes when it becomes idle.
Selects the language for the messages that appear on the printer control-panel display.
LANGUAGE *ENGLISH
Several
I/O submenu
Items on the I/O (input/output) menu affect the communication between the printer and the computer. If the printer contains an HP Jetdirect print server, you can configure basic networking parameters using the submenu. These and other parameters can also be configured through HP Web Jetadmin (see
Using HP Web Jetadmin software
) or other network configuration tools, such as the embedded Web server (see
).
The following table lists the settings and possible values. In the Values column, the default value for each setting is the one with an asterisk (*) next to it.
Configure Device menu 175
Item
I/O TIMEOUT
PARALLEL
INPUT
Values
5 to 300 (*15
SECONDS)
HIGH SPEED
ADVANCED
FUNCTIONS
EMBEDDED
JETDIRECT MENU
TCP/IP
IPX/SPX
APPLETALK
DLC/LLC
SECURE WEB
DIAGNOSTICS
Explanation
Select the I/O timeout period in seconds.
This setting allows you to adjust timeout for the best performance. If data from other ports appears in the middle of your print job, increase the timeout value.
HIGH SPEED : Select YES to enable the printer to accept the faster parallel communications that are used for connections with newer computers.
ADVANCED FUNCTIONS : Turn the bidirectional parallel communication on or off. The default is set for a bidirectional parallel port (IEEE-1284).
The function allows the printer to send status readback messages to the computer. Turning the parallel advanced functions on might slow language switching.
TCP/IP : Select whether the TCP/IP protocol stack is enabled or disabled. You can set several
TCP/IP parameters.
Select the TCP/IP CONFIGURE METHOD to configure the EIO card. For the MANUAL option, set the values for IP ADDRESS , SUBNET
MASK , LOCAL GATEWAY , and DEFAULT
GATEWAY .
IPX/SPX : Select whether the IPX/SPX protocol stack (in Novell NetWare networks, for example) is enabled or disabled.
APPLETALK : Enable or disable an AppleTalk network.
DLC/LLC : Select whether the DLC/LLC protocol stack is enabled or disabled.
SECURE WEB : Specify whether the embedded
Web server accepts communications by using only secure HTTP (HTTPS) or by using both
HTTP and HTTPS.
DIAGNOSTICS : Provides tests to help diagnose network hardware or TCP/IP network connection problems.
Resets submenu
Items on the Resets submenu relate to returning settings to the defaults and changing settings such as Sleep Mode.
The following table lists the settings and possible values. In the Values column, the default value for each setting is the one with an asterisk ( * ) next to it.
Item Values Explanation
176 Appendix B Control panel menus ENWW
RESTORE FACTORY
SETTINGS
There is no value to select.
SLEEP MODE *ON
OFF
Performs a simple reset and restores most of the factory (default) settings. This item also clears the input buffer for the active I/O.
CAUTION
Restoring memory during a print job cancels the print job.
Turns Sleep mode on or off. Using Sleep mode offers the following advantages:
● Minimizes the amount of power that the printer consumes when it is idle
● Reduces wear on electronic components in the printer (turns off the display backlight, but the display is still readable)
The printer automatically comes out of Sleep mode when you send a print job, press a printer control panel button, open a tray, or open the top cover.
You can set how long the printer remains idle before it enters Sleep mode.
ENWW Configure Device menu 177
Diagnostics menu
Administrators can use this submenu to isolate parts and to troubleshoot jam and printquality issues.
The following table lists the settings and possible values. In the Values column, the default value for each setting is the one that has an asterisk ( * ) next to it.
Item
PRINT EVENT LOG
SHOW EVENT
LOG
Values
There is no value to select.
There is no value to select.
PAPER PATH TEST PRINT TEST PAGE
SOURCE
DESTINATION
DUPLEX
COPIES
Explanation
Press ( S
ELECT
button) to generate a list of the
50 most recent entries in the event log. The printed event log shows error number, page count, error code, and description or personality.
Press ( S
ELECT
button) to scroll through the contents of the event log at the printer control panel, which lists up to the 50 most recent events. Use ( U
P
button) or ( D
OWN
button) to scroll through the event log contents.
Generates a test page that is useful for testing the paper-handling features of the printer.
PRINT TEST PAGE : Press ( S
ELECT
button) to start the paper-path test using the source (tray), destination (output bin), duplex, and number of copies settings that you set in the other items on the Paper Path Test menu. Set the other items before selecting PRINT TEST PAGE .
SOURCE : Select the tray that uses the paper path that you want to test. You can select any tray that is installed. Select ALL TRAYS to test all paper paths. (Paper must be loaded in the selected trays.)
DESTINATION : Select the output bin that uses the paper path that you want to test. You can select any output bin that is installed. Select ALL
BINS to test all paper paths.
DUPLEX : Determine whether the paper goes through the duplexer during the paper-path test.
The menu item appears only if the printer includes a built-in duplexer .
COPIES : Set how many sheets of paper are used from each tray during the paper-path test.
178 Appendix B Control panel menus ENWW
Service menu
The Service menu is locked and requires a PIN for access. This menu is intended for use by authorized service personnel.
ENWW Service menu 179
180 Appendix B Control panel menus ENWW
C
Specifications
HP LaserJet 2400 series physical specifications
Product dimensions
Product
HP LaserJet 2410, 2420,
2420d, 2420n, 2420dn, and
2430n
HP LaserJet 2430t, 2430tn, and 2430dtn optional 500-sheet feeder
1 Without print cartridge
Height
260 mm
(10.2 inches)
Depth
400 mm
(15.7 inches)
Width
425 mm
(16.7 inches)
Weight 1
15.2 kg
(33.5 lb)
400 mm
(15.7 inches)
140 mm
(5.5 inches)
400 mm
(15.7 inches)
400 mm
(15.7 inches)
425 mm
(16.7 inches)
425 mm
(15.7 inches)
20.9 kg (46 lb)
5.7 kg (12.5 lb)
Product dimensions, with all doors and trays fully opened
Printer model
HP LaserJet 2410, 2420, 2420d,
2420n, 2420dn, and 2430n
HP LaserJet 2430t, 2430tn, and
2430dtn
Height
260 mm
(10.2 inches)
400 mm
(15.7 inches)
Depth
730 mm
(28.7 inches)
730 mm
(28.7 inches)
Width
675 mm
(26.6 inches)
675 mm
(26.6 inches)
ENWW HP LaserJet 2400 series physical specifications 181
Electrical specifications
WARNING!
Power requirements are based on the country/region where the printer is sold. Do not convert operating voltages. This can damage the printer and void the product warranty.
Power requirements (HP LaserJet 2400 series)
Specification
Power requirements
Rated short-term current
110-volt models
110 to 127 volts (± 10%)
50/60 Hz (± 2 Hz)
10.0 Amps
230-volt models
220 to 240 volts (± 10%)
50/60 Hz (± 2 Hz)
5.0 Amps
Power consumption HP LaserJet 2400 series (average, in watts) 1
Product model Printing 2 Ready Sleep Off
HP LaserJet 2410
HP LaserJet 2420
625 W 3
625 W 3
625 W 3
11 W
11 W
8.5 W
8.5 W
0.4 W
0.4 W
HP LaserJet 2420d
HP LaserJet 2420n 625 W 3
11 W
11 W
8.5 W
8.5 W
0.4 W
0.4 W
HP LaserJet 2420dn 625 W 3 11 W 8.5 W 0.4 W
HP LaserJet 2430n
HP LaserJet 2430t
625 W 3
625 W 3
625 W 3
11 W
11 W
8.5 W
8.5 W
0.4 W
0.4 W
HP LaserJet 2430tn 11 W 8.5 W 0.4 W
HP LaserJet 2430dtn 625 W 3 11 W 8.5 W 0.4 W
1 Values subject to change. See
, http://www.hp.com/support/ lj2420 , or http://www.hp.com/support/lj2430 for current information.
2 Power numbers are the highest values measured using all standard voltages.
3 HP LaserJet 2410 speed is 25 ppm Letter size and 24 ppm A4 size. HP LaserJet 2420 speed is 30 ppm Letter size and 28 ppm A4 size. HP LaserJet 2430 speed is 35 ppm Letter size and 33 ppm A4 size.
4 Default time from Ready mode to Sleep = 30 minutes.
5 Recovery time from Sleep to start of printing = less than 8.5 seconds.
6 Heat dissipation in Ready mode = 37.5 BTU/hour (HP LaserJet 2410), 37.5 BTU/hour
(HP LaserJet 2420), and 37.5 BTU/hour (HP LaserJet 2430).
182 Appendix C Specifications ENWW
Acoustic emissions
Sound power and pressure level 1 (HP LaserJet 2400 series)
Sound power level
Printing 2 (HP LaserJet 2410)
Printing 2 (HP LaserJet 2420)
Printing 2 (HP LaserJet 2430)
Ready (HP LaserJet 2410)
Ready (HP LaserJet 2420)
Ready (HP LaserJet 2430)
Sound pressure level
Declared per ISO 9296
L
WAd
= 6.6 Bels (A) [66 dB(A)]
L
WAd
= 6.7 Bels (A) [67 dB(A)]
L
WAd
= 6.8 Bels (A) [68 dB(A)]
Essentially Inaudible
Essentially Inaudible
Essentially Inaudible
Declared per ISO 9296
Printing 2 (HP LaserJet 2410)
Printing 2 (HP LaserJet 2420)
Printing 2 (HP LaserJet 2430)
Ready (HP LaserJet 2410)
Ready (HP LaserJet 2420)
L pAm
=52 dB (A)
L pAm
=53 dB (A)
L pAm
=53 dB (A)
Essentially Inaudible
Essentially Inaudible
Ready (HP LaserJet 2430) Essentially Inaudible
1 Values subject to change. See
, http://www.hp.com/support/ lj2420 , or http://www.hp.com/support/lj2430 for current information.
2 HP LaserJet 2410 speed is 25 ppm A4 size. HP LaserJet 2420 speed is 29 ppm A4 size.
HP LaserJet 2430 speed is 34 ppm A4 size.
3 Configuration tested (HP LaserJet 2410): Base printer, simplex printing with A4 paper size.
4 Configuration tested (HP LaserJet 2420): Base printer, simplex printing with A4 paper size.
5 Configuration tested (HP LaserJet 2430): Base printer, simplex printing with A4 paper size.
ENWW Acoustic emissions 183
Operating environment
Environmental condition
Temperature (printer and print cartridge)
Relative humidity
Printing
15° to 32.5°C (59° to 89°F)
10% to 80%
Storage/standby
-20° to 40°C (-4° to 104°F)
10% to 90%
184 Appendix C Specifications ENWW
Paper specifications
For complete paper specifications for all HP LaserJet printers, see the HP LaserJet printer family print media guide (available at http://www.hp.com/support/ljpaperguide ).
Category
Acid content
Caliper
Curl in ream
Cut edge conditions
Fusing compatibility
Specifications
5.5 pH to 8.0 pH
0.094 to 0.18 mm (3.0 to 7.0 mils)
Flat within 5 mm (0.02 inch)
Cut with sharp blades with no visible fray.
Must not scorch, melt, offset, or release hazardous emissions when heated to 200°C
(392°F) for 0.1 second.
Long grain
4% to 6% by weight
100 to 250 Sheffield
Grain
Moisture content
Smoothness
Printing and paper storage environment
Ideally, the printing and paper storage environment should be at or near room temperature, and not too dry or too humid. Remember paper is hygroscopic; it absorbs and loses moisture rapidly.
Heat works with humidity to damage paper. Heat causes the moisture in paper to evaporate, while cold causes it to condense on the sheets. Heating systems and air conditioners remove most of the humidity from a room. As paper is opened and used, it loses moisture, causing streaks and smudging. Humid weather or water coolers can cause the humidity to increase in a room. As paper is opened and used it absorbs any excess moisture, causing light print and dropouts. Also, as paper loses and gains moisture it can distort. This can cause jams.
As a result, paper storage and handling are as important as the paper-making process itself.
Paper storage environmental conditions directly affect the feed operation.
Care should be taken not to purchase more paper than can be easily used in a short time
(about 3 months). Paper stored for long periods might experience heat and moisture extremes, which can cause damage. Planning is important to prevent damage to a large supply of paper.
Unopened paper in sealed reams can remain stable for several months before use. Opened packages of paper have more potential for environmental damage, especially if they are not wrapped with a moisture-proof barrier.
ENWW Paper specifications 185
NOTE
The paper storage environment should be properly maintained to ensure optimum printer performance. The required condition is 20° to 24°C (68° to 75°F), with a relative humidity of
45% to 55%. The following guidelines should be helpful when evaluating the paper's storage environment:
● Paper should be stored at or near room temperature.
● The air should not be too dry or too humid (due to the hygroscopic properties of paper).
● The best way to store an opened ream of paper is to rewrap it tightly in its moistureproof wrapping. If the printer environment is subject to extremes, unwrap only the amount of paper to be used during the day's operation to prevent unwanted moisture changes.
Envelopes
Envelope construction is critical. Envelope fold lines can vary considerably, not only between manufacturers, but also within a box from the same manufacturer. Successful printing on envelopes depends upon the quality of the envelopes. When selecting envelopes, consider the following components:
● Weight: The weight of the envelope paper should not exceed 105 g/m 2 (28 lb) or jamming might occur.
● Construction: Prior to printing, envelopes should lie flat with less than 6 mm (0.25 inch) curl, and should not contain air.
● Condition: Envelopes should not be wrinkled, nicked, or otherwise damaged.
● Temperature: You should use envelopes that are compatible with the heat and pressure of the printer.
● Size: You should use only envelopes within the following size ranges.
● Minimum : 76 x 127 mm (3 x 5 inches)
● Maximum : 216 x 356 mm (8.5 x 14 inches)
Use only tray 1 to print envelopes.You might experience some jams when using any media with a length less than 178 mm (7 inches). This might be caused by paper that has been affected by environmental conditions. For optimum performance, make sure you are storing and handling the paper correctly (see
Printing and paper storage environment ). Choose
envelopes in the printer driver (see
186 Appendix C Specifications ENWW
Envelopes with double side seams
Double side-seam construction has vertical seams at both ends of the envelope rather than diagonal seams. This style might be more likely to wrinkle. Be sure the seam extends all the way to the corner of the envelope as illustrated below.
NOTE
1
2
1 Acceptable envelope construction
2 Unacceptable envelope construction
Envelopes with adhesive strips or flaps
Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use adhesives compatible with the heat and pressure in the printer. The extra flaps and strips might cause wrinkling, creasing, or even jams and might even damage the fuser.
Envelope margins
The following gives typical address margins for a commercial #10 or DL envelope.
Type of address
Return address
Delivery address
Top margin
15 mm (0.6 inch)
51 mm (2 inches)
Left margin
15 mm (0.6 inch)
89 mm (3.5 inches)
For the best print quality, position margins no closer than 15 mm (0.6 inch) from the edges of the envelope. Avoid printing over the area where the envelope's seams meet.
Envelope storage
Proper storage of envelopes helps contribute to print quality. Envelopes should be stored flat. If air is trapped in an envelope, creating an air bubble, then the envelope might wrinkle during printing.
For more information, see Printing on envelopes
.
ENWW Paper specifications 187
CAUTION
NOTE
CAUTION
NOTE
Labels
To avoid damaging the printer, use only labels recommended for laser printers. To prevent serious jams, always use tray 1 to print labels and always use the rear output bin. Never print on the same sheet of labels more than once or print on a partial sheet of labels.
Label construction
When selecting labels, consider the quality of each component:
● Adhesives: The adhesive material should be stable at 200°C (392°F), the printer's fusing temperature.
● Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets with spaces between the labels, causing serious jams.
● Curl: Prior to printing, labels must lie flat with no more than 13 mm (0.5 inch) of curl in any direction.
● Condition: Do not use labels with wrinkles, bubbles, or other indications of separation.
For more information, see Printing on labels .
Choose labels in the printer driver (see
Transparencies
Transparencies used in the printer must be able to withstand 200°C (392°F), the printer's fusing temperature.
To avoid damaging the printer, use only transparencies recommended for use in
For more information, see Printing on transparencies
.
Choose transparencies in the printer driver (see
).
188 Appendix C Specifications ENWW
D
Printer memory and expansion
This section explains the memory features of the printer and provides steps for expansion.
●
●
●
Checking DIMM or CompactFlash installation
●
Saving resources (permanent resources)
●
ENWW 189
Overview
NOTE
NOTE
The printer comes with one dual inline memory module (DIMM) already installed. One additional DIMM slot and two CompactFlash slots are available for upgrading the printer with the following items:
● More printer memory—DIMMs are available in 32, 48, 64, 128, and 256 MB.
● CompactFlash font cards—Unlike standard printer memory, CompactFlash cards can be used to permanently store downloaded items, such as fonts and forms, even when the printer is off. These cards can also be used to enable the printer to print non-Roman characters.
● Other DIMM- and CompactFlash-based printer languages and printer options.
For ordering information, see Ordering parts, accessories, and supplies
.
Single inline memory modules (SIMMs) used in previous HP LaserJet printers are not compatible with the printer.
The printer also has one EIO slot for expanding the printer's networking capabilities. The
EIO slot can be used to upgrade the printer with an additional network connection, such as a wireless print server, network card, or a connectivity card for serial or AppleTalk.
Some HP LaserJet 2400 series printers come with a network device already installed. The
EIO slot may be used to provide networking capabilities in addition to those already built into the printer.
To find out how much memory is installed in the printer, or to find out what is installed in the
EIO slots, print a configuration page. (See Configuration page ).
190 Appendix D Printer memory and expansion ENWW
Printer memory
You might want to add more printer memory to the printer if you often print complex graphics, print PostScript (PS) documents, or use many downloaded fonts. Added memory also gives you more flexibility in supporting job-storage features, such as quick copying.
CAUTION
To install printer memory
Static electricity can damage DIMMs. When handling DIMMs, either wear an antistatic wrist strap or frequently touch the surface of the DIMM antistatic package, then touch bare metal on the printer.
The HP LaserJet 2400 series printers come with one DIMM installed in slot 1. A second
DIMM can be installed in slot 2. If desired, you can replace the DIMM installed in slot 1 with a higher memory DIMM.
If you have not already done so, print a configuration page to find out how much memory is installed in the printer before adding more memory. See
1. After the configuration page has printed, turn the printer off and disconnect the power cord.
2. Disconnect all interface cables.
3. Remove the right side panel by sliding it towards the rear of the printer until the side slides free from the printer.
ENWW Printer memory 191
4. Open the access door by pulling on the metal tab.
5. Remove the DIMM from the antistatic package.
CAUTION To reduce the possibility of damage caused by static electricity, always wear an electrostatic discharge (ESD) wrist strap or touch the surface of the antistatic package before handling
DIMMs.
6. Hold the DIMM by the edges, and align the notches on the DIMM with the DIMM slot.
(Check that the locks on each side of the DIMM slot are open.)
192 Appendix D Printer memory and expansion ENWW
7. Press the DIMM straight into the slot, and press firmly. Make sure the locks on each side of the DIMM snap into place.
NOTE To remove a DIMM, first release the locks.
8. Close the access door, and press firmly until it snaps into place.
9. To replace the right side panel, line up the alignment arrows and slide the panel toward the front of the printer until it latches into place.
10. Reconnect the interface cable(s) and the power cord.
ENWW Printer memory 193
11. Turn the printer on.
194 Appendix D Printer memory and expansion ENWW
Installing CompactFlash cards
Up to two CompactFlash cards can be installed to add fonts to the printer.
To install a CompactFlash card
1. After the configuration page has printed, turn the printer off and disconnect the power cord.
2. Disconnect all interface cables.
3. Remove the right side panel by sliding it towards the rear of the printer until the side slides free from the printer.
4. Open the access door by pulling on the metal tab.
ENWW Installing CompactFlash cards 195
5. Remove the new CompactFlash card from its package.
6. Hold the CompactFlash card by its edges and line up the grooves in the side of the card with the tabs in the CompactFlash card slot.
7. Slide the CompactFlash card into place.
8. Close the access door, and press firmly until it snaps into place.
9. To replace the right side panel, line up the alignment arrows and slide the panel toward the front of the printer until it latches into place.
196 Appendix D Printer memory and expansion ENWW
10. Reconnect the interface cable(s) and the power cord.
Use Device Storage Manager in HP Web Jetadmin to manage fonts. For more information, see the Help in HP Web Jetadmin.
ENWW Installing CompactFlash cards 197
Checking DIMM or CompactFlash installation
After installing the DIMM or CompactFlash card, make sure that the installation was successful.
NOTE
To verify that DIMMs or CompactFlash cards are installed correctly
1. Turn the printer on. Check that the Ready light is illuminated after the printer has gone through the startup sequence. If an error message appears, a DIMM or CompactFlash card might have been incorrectly installed. See
Interpreting control-panel messages .
2. Print a configuration page (see Configuration page
).
3. Check the memory section on the configuration page and compare it to the configuration page that was printed before the memory installation. If the amount of memory has not increased, the DIMM or CompactFlash card might not be installed correctly, or the DIMM or CompactFlash card might be defective. Repeat the installation procedure. If necessary, install a different DIMM of CompactFlash card.
If you installed a printer language (personality), check the "Installed Personalities and
Options" section on the configuration page. This area should list the new printer language.
198 Appendix D Printer memory and expansion ENWW
Saving resources (permanent resources)
NOTE
Utilities or jobs that you download to the printer sometimes include resources (for example, fonts, macros, or patterns). Resources that are internally marked as permanent remain in the printer memory until you turn the printer power off.
Use the following guidelines if you use the page description language (PDL) ability to mark resources as permanent. For technical details, see an appropriate PDL reference for PCL or
PS.
● Mark resources as permanent only when it is absolutely necessary that they remain in memory while the printer power is turned on.
● Send permanent resources to the printer only at the beginning of a print job and not while the printer is printing.
Over-using permanent resources or downloading them while the printer is printing might affect printer performance or the ability to print complex pages.
ENWW Saving resources (permanent resources) 199
Installing an EIO card
Follow this procedure to install an EIO card.
To install an EIO card
1. Turn the printer power off.
2. Remove the two screws and cover plate from the EIO slot on the back of the printer.
NOTE Do not discard the screws or the cover plate. Save them for future use if you remove the EIO card.
3. Install the EIO card in the EIO slot and tighten the screws.
NOTE
4. Turn the printer power on and print a configuration page to verify that the new EIO device is recognized. (See
When you print a configuration page, an HP Jetdirect Configuration page that contains network configuration and status information also prints.
200 Appendix D Printer memory and expansion ENWW
To remove an installed EIO card
1. Turn the printer power off.
2. Remove the two screws from the EIO card, and then remove the EIO card from the EIO slot.
3. Place the cover plate from the EIO slot onto the back of the printer. Insert and tighten the two screws.
4. Turn the printer power on.
ENWW Installing an EIO card 201
202 Appendix D Printer memory and expansion ENWW
NOTE
E
Printer commands
Most programs do not require you to enter printer commands. See your computer and software documentation to find the method for entering printer commands, if needed.
PCL 6 and PCL 5e
HP-GL/2
PJL
PCL 6 and PCL 5e printer commands tell the printer which tasks to perform or which fonts to use. This section provides a quick reference for users who are already familiar with PCL 6 and
PCL 5e command structure.
The printer has the ability to print vector graphics using the HP-GL/2 graphics language. Printing in the HP-GL/2 language requires that the printer leave PCL 5e language and enter HP-GL/2 mode, which can be done by sending the printer
PCL 5e code. Some programs switch languages through their drivers.
HP's Printer Job Language (PJL) provides control above PCL 5e and other printer languages. The four major functions provided by
PJL are: printer language switching, job separation, printer configuration, and status readback from the printer. PJL commands can be used to change printer default settings.
The table at the end of this section contains commonly used PCL 5e commands. (See
Common PCL 6 and PCL 5 printer commands .) For a complete listing and explanation of
how to use PCL 5e, HP-GL/2, and PJL commands, see the HP PCL/PJL Reference Set , which is available on CD-ROM (HP part number 5961-0975).
ENWW 203
Understanding PCL 6 and PCL 5e printer command syntax
Before using printer commands, compare these characters:
Lowercase l:
Number one: l
1
Uppercase O:
Number 0:
O
0
Many printer commands use the lowercase letter l (l) and the number one (1), or the uppercase letter O (O) and the number zero (0). These characters might not appear on your screen as shown here. You must use the exact character and case specified for PCL 6 or
PCL 5e printer commands.
The figure below explains the elements of a typical printer command (in this instance, a command for page orientation).
1 2 3 4 5
1 Escape character (begins the escape sequence)
2 Parameterized character
3 Group character
4 Value field (contains both alpha and numeric characters)
5 Termination character (uppercase)
Combining escape sequences
Escape sequences can be combined into one escape sequence string. Follow these three important rules when combining code:
1. The first two characters after the E c
character are the parameterized and group characters. These characters must be the same in all of the commands that are to be combined.
2. When combining escape sequences, change the uppercase termination character in each individual escape sequence to lowercase.
3. The final character of the combined escape sequence must be uppercase.
The following is an example of an escape sequence string that would be sent to the printer to select legal paper, landscape orientation, and eight lines per inch:
E c
&l3AE c
&l1OE c
&l8D
The following escape sequence sends the same printer commands by combining them into a shorter sequence:
E c
&l3a1o8D
204 Appendix E Printer commands ENWW
Using escape characters
Printer commands always begin with the escape character (E c
).
The following table shows how the escape character can be inserted in various MS-DOS programs.
DOS program
Lotus 1-2-3 and Symphony
Microsoft Word for MS-DOS
WordPerfect for MS-DOS
MS-DOS Edit
MS-DOS Edlin dBase
Entry
Type
\027
Hold down Alt and type
027
on the numeric keypad
Type
<27>
Hold down Ctrl + P , and press
Esc
Hold down Ctrl + V , and press [
?? CHR(27)+"command"
What appears
027
<27>
^[
?? CHR(27)+" "
Selecting PCL 6 and PCL 5 fonts
The printer font list provides PCL 6 and PCL 5 printer commands for selecting fonts. See
PS or PCL font list for information about how to print the list. A sample section is shown in the
following illustration.
One variable box is available for specifying symbol sets and one for specifying point size.
These variables must be filled in, or the printer will use defaults. For example, if you want a symbol set that contains line-draw characters, select the 10U (PC-8) or 12U (PC-850)
symbol set. Other common symbol set codes are listed in the section Common PCL 6 and
1 2
NOTE
ENWW
1 Symbol set
2 Point size
Fonts are either "fixed" or "proportional" in spacing. The printer contains both fixed fonts
(Courier, Letter Gothic, and Lineprinter) and proportional fonts (CG Times, Arial, Times New
Roman, and others). Fixed-spaced fonts are generally used in programs such as spreadsheets and databases, where it is important for columns to line up vertically.
Proportional-spaced fonts are generally used in text and word-processing programs.
Understanding PCL 6 and PCL 5e printer command syntax 205
Common PCL 6 and PCL 5 printer commands
Job-control commands
Function
Reset
Number of copies
2-sided/1-sided printing
Command
E c
E
E c
&l#X
E c
&l#S
Options (#) not available
1 to 999
0 = Simplex (1-sided) printing
1 = Duplex (2-sided) with long edge binding
2 = Duplex (2-sided) with short edge binding
Page-control commands
Function
Paper source
Command
E c
&l#H
Paper size E c
&l#A
Options (#)
0 = Prints or ejects current page
1 = Tray 2
2 = Manual feed, paper
3 = Manual feed, envelope
4 = Tray 1
5 = Tray 3
6 = Optional envelop feeder
7 = Auto select
8 = Tray 4
20 to 69 = external trays
1 = Executive
2 = Letter
3 = Legal
25 = A5
26 = A4
45 = JIS B5
80 = Monarch envelope
81 = Commercial 10 envelope
90 = DL ISO envelope
91 = C5 ISO envelope
100 = B5 ISO envelope/B5 ISO
101 = Custom
206 Appendix E Printer commands ENWW
ENWW
Page-control commands (continued)
Function
Paper type
Orientation
Command
E c
&n#
E c
&l#O
Options (#)
5WdBond = Bond
6WdPlain = Plain
6WdColor = Color
7WdLabels = Labels
9WdRecycled = Recycled
11WdLetterhead = Letterhead
10WdCardstock = Cardstock
11WdPrepunched =
Prepunched
11WdPreprinted = Preprinted
13WdTransparency =
Transparency
#WdCustompapertype =
Custom 1
0 = Portrait
1 = Landscape
2 = Reverse portrait
3 = Reverse landscape
# = Number of lines Top margin
Text length (bottom margin)
E c
&l#E
E c
&l#F # = Number of lines from top margin
# = Column number Left margin
Right margin
Horizontal motion index
Vertical motion index
Line spacing
E c
&a#L
E c
&a#M
E c
&k#H
E c
&l#C
E c
&l#D
# = Column number from left margin
1/120-inch increments
(compresses print horizontally)
1/48-inch increments
(compresses print vertically)
# = Lines per inch (1, 2, 3, 4, 5,
6, 12, 16, 24, 48)
Perforation skip E c
&l#L 0 = Disable (turn off)
1 = Enable (turn on)
1 For custom paper, replace "Custompapertype" with the name of the paper, and replace the
"#" with the number of characters in the name, plus 1.
Cursor Positioning
Function
Vertical position (rows)
Command
E c
&a#R
Options (#)
# = Row number
Understanding PCL 6 and PCL 5e printer command syntax 207
Cursor Positioning (continued)
Function Command
Vertical position (dots) E c
*p#Y
Vertical position (decipoints) E c
&a#V
Horizontal position (columns)
Horizontal position (dots)
E c
&a#C
E c
*p#X
Horizontal position (decipoints) E c
&a#H
Programming hints
Function
End of line wrap
Display functions on
Display functions off
Command
E c
&s#C
E c
Y
E c
Z
Language selection
Function
Enter PCL 6 or PCL 5 mode
Command
E c
%#A
Enter HP-GL/2 mode E c
%#B
Options (#)
# = Dot number (300 dots = 1 inch)
# = Decipoint number (720 decipoints = 1 inch)
# = Column number
# = Dot number (300 dots = 1 inch)
# = Decipoint number (720 decipoints = 1 inch)
Options (#)
0 = Enable (turn off)
1 = Disable (turn on) not available not available
Options (#)
0 = Use previous PCL 5 cursor position
1 = Use current HP-GL/2 pen position
0 = Use previous HP-GL/2 pen position
1 = Use current PCL 5 cursor position
208 Appendix E Printer commands ENWW
ENWW
Font selection
Function
Symbol sets
Primary spacing
Primary pitch
Set pitch mode 1
Primary height
Primary style
Primary stroke wt.
Typeface
Command
E c
(#
E c
(s#P
E c
(s#H
E c
&k#S
E c
(s#V
E c
(s#S
E c
(s#B
E c
(s#T
1 The preferred method is to use the primary pitch command.
Options (#)
8U = HP Roman-8 Symbol Set
10U = IBM Layout (PC-8) (code page 437) Default Symbol Set
12U = IBM Layout for Europe
(PC-850) (code page 850)
8M = Math-8
19U = Windows 3.1 Latin 1
9E = Windows 3.1 Latin 2
(commonly used in Eastern
Europe)
5T = Windows 3.1 Latin 5
(commonly used in Turkey)
579L = Wingdings Font
0 = Fixed
1 = Proportional
# = Characters/inch
0 = 10
4 = 12 (elite)
2 = 16.5 - 16.7 (compressed)
# = Points
0 = Upright (solid)
1 = Italic
4 = Condensed
5 = Condensed italic
0 = Medium (book or text)
1 = Semi bold
3 = Bold
4 = Extra bold
Print a PCL 6 or PCL 5 font list to view the command for each internal font.
Understanding PCL 6 and PCL 5e printer command syntax 209
210 Appendix E Printer commands ENWW
F
Regulatory information
Introduction
This section contains the following regulatory information:
●
●
Environmental Product Stewardship program
●
●
●
●
●
ENWW Introduction 211
FCC regulations
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If this equipment is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation; the presence of interference can be determined by turning the equipment off and on. If this equipment does cause harmful interference to radio or television communications, the user is encouraged to try to correct the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase distance between equipment and receiver.
● Connect equipment to an outlet on a circuit different from that to which the receiver is located.
● Consult your dealer or an experienced radio/television technician.
Any changes or modifications to the printer that are not expressly approved by HP could void the user’s authority to operate this equipment.
Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of
FCC rules.
212 Appendix F Regulatory information ENWW
Environmental Product Stewardship program
Protecting the environment
Hewlett-Packard Company is committed to providing quality products in an environmentally sound manner. This product has been designed with several attributes to minimize impacts on our environment.
Ozone production
This product generates no appreciable ozone gas (O
3
).
Energy consumption
Power usage drops significantly while in PowerSave mode, which saves natural resources and saves money without affecting the high performance of this product. This product qualifies for ENERGY STAR ® (Printers, Version 3.0), which is a voluntary program to encourage the development of energy-efficient office products.
ENWW
ENERGY STAR ® is a U.S. registered service mark owned by the U.S. government. As an
ENERGY STAR partner, Hewlett-Packard Company has determined that this product meets
ENERGY STAR Guidelines for energy efficiency. For more information, see http://www.energystar.gov
.
Toner consumption
EconoMode uses significantly less toner, which might extend the life of the print cartridge.
Paper use
This product's automatic duplex feature (two-sided printing) and n-up printing (multiple pages printed on one page) capabilities can reduce media usage and the resulting demands on natural resources. (The automatic duplex feature is available only for models that include a built-in duplexer. Manual duplexing is available for all models. See
.)
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability to identify plastics for recycling purposes at the end of the product's life.
HP LaserJet printing supplies
In many countries/regions, this product's printing supplies (for example, print cartridge and fuser) can be returned to HP through the HP Printing Supplies Environmental Program. An easy-to-use and free take back program is available in more than 30 countries/regions.
Multilingual program information and instructions are included in every new HP LaserJet print cartridge and supplies package.
HP Printing Supplies Returns and Recycling Program Information
Environmental Product Stewardship program 213
Since 1992, HP has offered HP LaserJet supplies return and recycling free of charge in 86% of the world market where HP LaserJet supplies are sold. Postage-paid and pre-addressed labels are included within the instruction guide in most HP LaserJet print cartridge boxes.
Labels and bulk boxes are also available through the Web site at http://www.hp.com/recycle .
More than 10 million HP LaserJet print cartridges were recycled globally in 2002 through the
HP Planet Partners supplies recycling program. This record number represents 26 million pounds of print cartridge materials that were diverted from landfills. Worldwide, HP recycled an average of 80% of the print cartridge by weight, consisting primarily of plastic and metals.
Recycled plastics and metals are used to make new products, such as HP products, plastic trays, and spools. The remaining materials are disposed of in an environmentally responsible manner.
● U.S. returns For a more environmentally responsible return of used cartridges and supplies, HP encourages the use of bulk returns. Simply bundle two or more cartridges together and use the single, prepaid, preaddressed UPS label that is supplied in the package. For more information in the U.S., call 1-800-340-2445 or visit the HP LaserJet
Supplies Web site at http://www.hp.com/recycle .
● Non-U.S. returns Non-U.S. customers should call the local HP Sales and Service Office or visit the http://www.hp.com/recycle Web site for further information regarding availability of the HP Supplies Returns and Recycling Program.
Paper
This product is capable of using recycled papers when the paper meets the guidelines outlined in the HP LaserJet Printer Family Print Media Guide . Go to http://www.hp.com/ support/ljpaperguide to download this guide in .PDF format. This product is suitable for the use of recycled media according to EN12281:2002.
Material restrictions
This HP product does not contain added mercury.
This HP product may initially contain lead in solder that might require special handling at endof-life. This product will eventually switch to lead-free construction in compliance with the
European Waste from Electrical and Electronic Equipment (WEEE) law.
This HP product contains a battery that might require special handling at end-of-life.
Type
Materials
Location
User removable
Lithium Carbon Monofluoride (BR1632), 3 Volt, button-style battery, 1.5 grams
Mercury-free, Cadmium-free
On printed circuit board
No
For recycling information, you can contact http://www.hp.com/recycle or contact your local authorities or the Electronics Industry Alliance: http://www.eiae.org.
Material safety data sheet
Material Safety Data Sheets (MSDS) for supplies that contain chemical substances (for example, toner) can be obtained by contacting the HP Web site at http://www.hp.com/go/ msds or http://www.hp.com/hpinfo/community/environment/productinfo/safety .
214 Appendix F Regulatory information ENWW
For more information
To obtain information about the following environmental topics, visit http://www.hp.com/go/ environment or http://www.hp.com/hpinfo/community/environment/productinfo/safety .
● Product environmental profile sheet for this and many related HP products.
● HP's commitment to the environment
● HP's environmental management system
● HP's end-of-life product return and recycling program
● Material Safety Data Sheets (MSDS)
ENWW Environmental Product Stewardship program 215
Declaration of conformity
Declaration of Conformity according to ISO/IEC Guide 22 and EN 45014
Manufacturer's Name:
Manufacturer's Address:
Hewlett-Packard Company
11311 Chinden Boulevard
Boise, Idaho 83714-1021, USA declares, that the product
Product Name:
Regulatory Model Number 3) :
Product Options: conforms to the following Product Specifications:
HP LaserJet 2410/2420/2430 printer
BOISB-0406-00
Including optional accessory 500-Sheet Input Tray (Q5963A)
ALL
Safety:
EMC:
IEC 60950:1999 / EN60950: 2000
IEC 60825-1:1993 +A1 +A2 / EN 60825-1:1994 +A11 +A2 (Class 1 Laser/LED Product)
GB4943-2001
CISPR 22:1997 / EN 55022:1998 Class B 1)
EN 61000-3-2:1995 + A14
EN 61000-3-3:1995 + A1
EN 55024:1998
FCC Title 47 CFR, Part 15 Class B 2) / ICES-003, Issue 4
GB9254-1998, GB17625.1-1998
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC, and carries the CE-Marking accordingly.
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
*) The product includes LAN (Local Area Network) options. When the interface cable is attached to LAN connectors, the product meets the requirements of EN55022 Class A in which case the following applies: "Warning – This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures."
2) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
3) For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the marketing name or the product number(s).
For regulatory topics only:
Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd., 31-41 Joseph Street Blackburn, Victoria 3130, Australia
European Contact:
Boise, Idaho , USA
April 2, 2004
USA Contact:
Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-TRE / Standards
Europe, Herrenberger Strasse 140 , D-71034, Böblingen (FAX: +49-7031-14-3143)
Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160 Boise, ID 83707-0015, (Phone:
208-396-6000)
216 Appendix F Regulatory information ENWW
Country-/region-specific safety statements
WARNING!
Laser safety statement
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration has implemented regulations for laser products manufactured since August 1,
1976. Compliance is mandatory for products marketed in the United States. The printer is certified as a "Class 1" laser product under the U.S. Department of Health and Human
Services (DHHS) Radiation Performance Standard according to the Radiation Control for
Health and Safety Act of 1968.
Since radiation emitted inside the printer is completely confined within protective housings and external covers, the laser beam cannot escape during any phase of normal user operation.
Using controls, making adjustments, or performing procedures other than those specified in this user guide may result in exposure to hazardous radiation.
Canadian DOC statement
Complies with Canadian EMC Class B requirements.
«Conforme àla classe B des normes canadiennes de compatibilité électromagnétiques
(CEM).»
Japanese VCCI statement
Korean EMI statement
ENWW Country-/region-specific safety statements 217
Finnish laser statement
LASERTURVALLISUUS
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
HP LaserJet 2410, 2420, and 2430 series -laserkirjoitin on käyttäjän kannalta turvallinen luokan 1 laserlaite. Normaalissa käytössä kirjoittimen suojakotelointi estää lasersäteen pääsyn laitteen ulkopuolelle.
Laitteen turvallisuusluokka on määritetty standardin EN60825-1 (1994) mukaisesti.
VAROITUS!
Laitteen käyttäminen muulla kuin käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.
VARNING!
Om apparaten används på annat sätt än i bruksanvisning specificerats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1.
HUOLTO
HP LaserJet 2410, 2420, and 2430 series -kirjoittimen sisällä ei ole käyttäjän huollettavissa olevia kohteita. Laitteen saa avata ja huoltaa ainoastaan sen huoltamiseen koulutettu henkilö. Tällaiseksi huoltotoimenpiteeksi ei katsota väriainekasetin vaihtamista, paperiradan puhdistusta tai muita käyttäjän käsikirjassa lueteltuja, käyttäjän tehtäväksi tarkoitettuja ylläpitotoimia, jotka voidaan suorittaa ilman erikoistyökaluja.
VARO!
Mikäli kirjoittimen suojakotelo avataan, olet alttiina näkymättömälle lasersäteilylle laitteen ollessa toiminnassa. Älä katso säteeseen.
VARNING!
Om laserprinterns skyddshölje öppnas då apparaten är i funktion, utsättas användaren för osynlig laserstrålning. Betrakta ej strålen.
Tiedot laitteessa käytettävän laserdiodin säteilyominaisuuksista:
Aallonpituus 770-800 nm
Teho 5 mW
Luokan 3B laser
218 Appendix F Regulatory information ENWW
G
Service and support
Hewlett-Packard limited warranty statement
HP PRODUCT
HP LaserJet 2410, 2420, and 2430 series
DURATION OF LIMITED WARRANTY
1 year, Return to Authorized Service Center
HP warrants to you, the end-user customer, that HP hardware and accessories will be free from defects in materials and workmanship after the date of purchase, for the period specified above. If HP receives notice of such defects during the warranty period, HP will, at its option, either repair or replace products which prove to be defective. Replacement products may be either new or equivalent in performance to new.
HP warrants to you that HP software will not fail to execute its programming instructions after the date of purchase, for the period specified above, due to defects in material and workmanship when properly installed and used. If HP receives notice of such defects during the warranty period, HP will replace software which does not execute its programming instructions due to such defects.
HP does not warrant that the operation of HP products will be uninterrupted or error free. If HP is unable, within a reasonable time, to repair or replace any product to a condition as warranted, you will be entitled to a refund of the purchase price upon prompt return of the product.
HP products may contain remanufactured parts equivalent to new in performance or may have been subject to incidental use.
Warranty does not apply to defects resulting from (a) improper or inadequate maintenance or calibration, (b) software, interfacing, parts or supplies not supplied by HP, (c) unauthorized modification or misuse, (d) operation outside of the published environmental specifications for the product, or (e) improper site preparation or maintenance.
TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE WARRANTIES ARE EXCLUSIVE AND NO OTHER
WARRANTY OR CONDITION, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED AND HP
SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY,
SATISFACTORY QUALITY, AND FITNESS FOR A PARTICULAR PURPOSE. Some countries/regions, states or provinces do not allow limitations on the duration of an implied warranty, so the above limitation or exclusion might not apply to you. This warranty gives you specific legal rights and you might also have other rights that vary from country/region to country/region, state to state, or province to province. HP's limited warranty is valid in any country/region or locality where HP has a support presence for this product and where HP has marketed this product. The level of warranty service you receive may vary according to local standards. HP will not alter form, fit or function of the product to make it operate in a country/region for which it was never intended to function for legal or regulatory reasons.
TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE
YOUR SOLE AND EXCLUSIVE REMEDIES. EXCEPT AS INDICATED ABOVE, IN NO EVENT WILL HP OR ITS
SUPPLIERS BE LIABLE FOR LOSS OF DATA OR FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL
(INCLUDING LOST PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN CONTRACT, TORT, OR
OTHERWISE. Some countries/regions, states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
ENWW Hewlett-Packard limited warranty statement 219
THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAWFULLY
PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN ADDITION TO THE MANDATORY
STATUTORY RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU.
220 Appendix G Service and support ENWW
Print Cartridge Limited Warranty Statement
This HP Print Cartridge is warranted to be free from defects in materials and workmanship.
This warranty does not apply to print cartridges that (a) have been refilled, refurbished, remanufactured or tampered with in any way, (b) experience problems resulting from misuse, improper storage, or operation outside of the published environmental specifications for the printer product or (c) exhibit wear from ordinary use.
To obtain warranty service, please return the product to place of purchase (with a written description of the problem and print samples) or contact HP customer support. At HP’s option, HP will either replace products that prove to be defective or refund your purchase price.
TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE WARRANTY IS EXCLUSIVE
AND NO OTHER WARRANTY OR CONDITION, WHETHER WRITTEN OR ORAL, IS
EXPRESSED OR IMPLIED AND HP SPECIFICALLY DISCLAIMS ANY IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY,
AND FITNESS FOR A PARTICULAR PURPOSE.
TO THE EXTENT ALLOWED BY LOCAL LAW, IN NO EVENT WILL HP OR ITS
SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL
(INCLUDING LOST PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN
CONTRACT, TORT, OR OTHERWISE.
THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT
LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN
ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF
THIS PRODUCT TO YOU.
ENWW Print Cartridge Limited Warranty Statement 221
Availability of support and service
Around the world, HP provides a variety of service and support options for purchase.
Availability of these programs will vary depending upon your location.
HP maintenance agreements
HP has several types of maintenance agreements that meet a wide range of support needs.
Maintenance agreements are not part of the standard warranty. Support services vary by location. Contact HP Customer Care to determine the services available to you and for more information about maintenance agreements. In general, the printer will have the following maintenance agreements:
Onsite service agreements
To provide you with the level of support best suited to your needs, HP has on-site service agreements with two response times:
Priority Onsite Service
This agreement provides 4-hour service response to your site for calls made during normal
HP business hours.
Next-Day Onsite Service
This agreement provides support by the next working day following a service request.
Extended coverage hours and extended travel beyond HP’s designated service zones are available on most on-site agreements (for additional charges).
222 Appendix G Service and support ENWW
HP Express Exchange (U.S. and Canada only)
NOTE
This service, available for an additional fee, is an alternative to the standard warranty and entails returning your printer for repair. HP Express Exchange allows you to receive a refurbished replacement unit and then return your defective printer. The fast turnaround from
HP Express Exchange minimizes downtime over traditional service programs that require you to ship the defective printer to the manufacturer and then wait for the printer to be repaired and returned.
If you choose to use this service, follow the steps listed below. If you have HP on-site support service, you should work directly with the local HP Customer Care center instead of following the steps outlined here.
To identify potential support options for this printer, go to http://www.hpexpress-services.com
and type the printer model number. In North America, additional options might be available through HP Customer Care. Call 1-800-HPINVENT [1-800-474-6836 (U.S.)] or
1-800-268-1221 (Canada).
To use HP Express Exchange
1. Call the HP Customer Care Center for the U.S. or Canada. A technician troubleshoots the situation and determines whether the printer has actually failed. If so, the technician refers the customer to the HP Service Center.
2. A representative from the service center requests product and customer information. In some cases, collateral might also be requested.
3. Before agreeing to use this service, check with the representative for information about returning your defective printer.
4. HP ships a refurbished replacement unit to arrive the next day. (Geographic distance might prevent next-day shipping.)
Exchanged units carry the remainder of the original unit’s warranty or 90 days, whichever is greater.
ENWW HP Express Exchange (U.S. and Canada only) 223
Repacking the printer
CAUTION
If HP Customer Care determines that your printer needs to be returned to HP for repair, follow the steps below to repack the printer before shipping it.
Shipping damage as a result of inadequate packing is the customer’s responsibility.
CAUTION
CAUTION
To repack the printer
1. Remove and retain any DIMMs or CompactFlash cards that you have purchased and installed in the printer. Do not remove the DIMM that came with the printer.
Static electricity can damage DIMMs. When handling DIMMs, either wear an antistatic wrist strap, or frequently touch the surface of the DIMM antistatic package and then touch bare metal on the printer. To remove the DIMMs, see
.
2. Remove and retain the print cartridge.
It is extremely important to remove the print cartridge before shipping the printer. A print cartridge that is left in the printer during shipping will leak and entirely cover the printer engine and other parts with toner.
To prevent damage to the print cartridge, avoid touching the roller on it, and store the print cartridge in its original packing material or so that it is not exposed to light.
3. Remove and retain the power cable, interface cable, and optional accessories.
4. If possible, include print samples and 50 to 100 sheets of paper or other print media that did not print correctly.
5. Include a completed copy of the
.
6. In the U.S., call HP Customer Care to request new packing material. In other areas, use the original packing material, if possible. Hewlett-Packard recommends insuring the equipment for shipment.
224 Appendix G Service and support ENWW
Service information form
WHO IS RETURNING THE EQUIPMENT?
Person to contact:
Alternate contact:
Return shipping address: Special shipping instructions:
Date:
Phone:
Phone:
WHAT ARE YOU SENDING?
Model name: Model number: Serial number:
Please attach any relevant printouts. Do NOT ship accessories (manuals, cleaning supplies, etc.) that are not required to complete the repair.
HAVE YOU REMOVED THE PRINT CARTRIDGE?
You must remove the print cartridge before shipping the printer, unless a mechanical problem prevents you from doing so.
Yes.
No, I cannot remove it.
WHAT NEEDS TO BE DONE?
(Attach a separate sheet if necessary.)
1. Describe the conditions of the failure. (What was the failure? What were you doing when the failure occurred? What software were you running? Is the failure repeatable?)
2. If the failure is intermittent, how much time elapses between failures?
3. If the unit connected to any of the following, give the manufacturer and model number.
Modem: Network: Personal computer:
4. Additional comments:
HOW WILL YOU PAY FOR THE REPAIR?
Under warranty Purchase/received date:
(Attach proof of purchase or receiving document with original received date.)
Maintenance contract number:
Purchase order number:
Except for contract and warranty service, a purchase order number and/or authorized signature must accompany any request for service.
If standard repair prices do not apply, a minimum purchase order is required. Standard repair prices can be obtained by contacting an HP-authorized repair center.
Authorized signature: Phone:
Billing address: Special billing instructions:
ENWW Service information form 225
226 Appendix G Service and support ENWW
Index
Symbols/Numerics
1,500-sheet tray
500-sheet tray
A
accessories
Accessory installation guides 2
address, displaying printer 13, 172
address, printer
Macintosh, troubleshooting 140, 143
adhesive labels. See labels
Apple Macintosh. See Macintosh
B
background printing, troubleshooting 141
bidirectional communication settings 176
bins
paper curl, troubleshooting 104
bins, output
blank pages
blank pages, troubleshooting 105
blurred print, troubleshooting 136
ENWW both sides, printing on
browser requirements
browsers supported
C cables
cables,
card stock
carriage returns, settings 168
cartridges
status, viewing with embedded Web server 71
status, viewing with HP Toolbox 75
Index 227
characters
cleaning
clearable warnings
setting display time 18 clearable warnings setting 18, 174
commands
CompactFlash cards
configuration page
configuration page, printing 85
consumables
control panel
clearable warning settings 18, 174
language, selecting 21, 96, 175
print cartridge supply level, checking 90
228 Index
covers
first page, different paper 65
creased paper, troubleshooting 135
crooked pages 134 curled paper, troubleshooting 134
custom-size paper
customer support
HP Instant Support Professional Edition (ISPE) iii
D
data transmission settings 176
default settings
default settings, restoring 176
Desktop Printer Utility, troubleshooting 140
Device Settings window, HP Toolbox 76
DIMMs
disk
ENWW
Documentation tab, HP Toolbox 76
dots, troubleshooting 130, 136
double-sided printing
draft quality printing 170, 171
drivers
Macintosh, troubleshooting 142
operating systems supported 24
duplex printing
duplex printing accessory
paper orientation 54 paper sizes supported 54
duplexer
duplexing
E
EIO cards
ENWW
EIo cards
embedded Web server
print cartridge supply level, checking 90
ENERGY STAR
envelopes
margins 48, 187 printing from tray 1 48
environment, specifications 184
environmental
EPS files, troubleshooting 141, 144
error messages
error messages, troubleshooting 116
Ethernet cards, part numbers 153
Explorer, versions supported
F
factory defaults, restoring 176
features
Flip Pages Up binding option 55
Index 229
fonts
EPS files, troubleshooting 141, 144
Macintosh, troubleshooting 141
fuser
G
General Protection FaultException OE 139
gray background, troubleshooting 131
H heavy paper
held jobs
Retrieve Job control panel menu 158
help
HP Instant Support Professional Edition (ISPE) iii
HP Jetdirect print server
configuration page, printing 85
HP LaserJet Utility, Macintosh 27
HP Printing Supplies Returns and Recycling Program
HP Toolbox
230 Index
print cartridge supply level, checking 90
HP Web Jetadmin
browsers supported 73 downloading 73
I
image reptition, troubleshooting 137
information pages, printing 85
Information tab, embedded Web server 71
input trays
installing
drivers using customization utility 80
network software, Macintosh 30
Windows software using New Hardware Found
interface cables, troubleshooting 98
Internet Explorer, versions supported
IP address
Macintosh, troubleshooting 140, 143
IP address, displaying 13, 172
ISPE (HP Instant Support Professional Edition) iii
J jams
first sheet, troubleshooting 104
print-cartridge area, clearing 110
ENWW
Jet direct print server
configuration page, printing 85
Jetadmin
browsers supported 73 downloading 73
Jetdirect print server
jobs
not printing, troubleshooting 98
storing, memory requirements 66
K
L labels
landscape orientation
language, control panel 21, 96, 175
languages, printer
LaserJet Utility, Macintosh 27
legal paper, clipped margins 146
letter paper, override A4 settings 166
letterhead
light print
line spacing, setting default 168
links
ENWW
loading
locking
loose toner
loose toner, troubleshooting 132
M
Macintosh
default driver settings, changing 60
operating systems supported 23
USB card, troubleshooting 141, 144
maintenance
manual feed
margins
legal paper, troubleshooting 146
media
Index 231
printing multiple pages on single sheet 62
tray selection 14, 38, 39, 173
memory
menus, control panel
messages
Microsoft Windows. See Windows
misformed characters, troubleshooting 133
multiple pages, printing on single sheet 62
232 Index
N
narrow paper
Netscape Navigator, versions supported
Networking tab, embedded Web server 72
networks
installing Macintosh software 30
installing Windows software 29
not responding, troubleshooting 106
Novell NetWare settings;NetWare settings;IPX/SPX
number of copies, setting default 165
O
on-site service agreements 222
online help
operating environment specifications 184
operating systems supported 23, 24
ordering
orientation
orientation, page
Other links
output bins
output quality
ENWW
P
page orientation
paper
printing multiple pages on single sheet 62
tray selection 14, 38, 39, 173
paper handling accessories
paper path
parallel cable, part number 153
parallel cables
parallel communications, settings 176
parallel port
ENWW parallel ports
not supported for Macintosh 31
part numbers
parts
PCL commands
PCL drivers
operating systems supported 24
See also drivers
PCL font list, printing 87, 160
PCL, setting as printer language 17, 174
personalities
phone numbers
PJL (Printer Job Language) commands 203
portrait orientation
ports
troubleshooting Macintosh 141, 144
postcards
PostScript error pages
PostScript Printer Description (PPD) files
PostScript, setting as printer language 17, 174
power
Index 233
PPDs
preprinted paper
prepunched paper
print cartridges
status, viewing with embedded Web server 71
status, viewing with HP Toolbox 75
print jobs
not printing, troubleshooting 98
print quality
print quality, troubleshooting
printer commands
Printer Dialog Extensions (PDEs), Macintosh 27
printer drivers. See drivers printer language
printer languages
printerlanguages
234 Index
PS driver
See also drivers
PS error pages
PS font list, printing 87, 160
PS, setting as printer language 17, 174
punched paper
Q quality
quick copy jobs
R
Range Check, troubleshooting 147
rear output bin
recycling
plastics 213 print cartridges 213
regulatory statements
Korean EMI statement 217 laser safety 217
removing software
repeating defects, troubleshooting;defects, repeating
repetitive defects
ENWW
resolution
Resolution Enhancement technology (REt) 171
restoring default settings 176
REt (Resolution Enhancement technology) 171
retention, job
rough paper
S
security
serial cables, troubleshooting 98
service
settings
configuration page, printing 85
defaults, changing 58 driver 58
Settings tab, embedded Web server 71
silent installation, driver 80
size, paper
250-sheet tray specifications 35
500-sheet tray specifications 35 duplexer specifications 35
ENWW
Sleep mode
sleep mode
slow printing, troubleshooting 100, 105
small paper
smeared toner, troubleshooting 132
software
installing using New Hardware Found wizard 32
network installation, Macintosh 30
network installation, Windows 29
operating systems supported 23
uninstalling from Macintosh 33 uninstalling from Windows 33
specifications
specks, troubleshooting 130, 136
speed
data transmission settings 176
spots, troubleshooting 130, 136
status
Information tab, embedded Web server 71
Index 235
stopped printing, troubleshooting 100
storage, job
storing
straight-through paper path 47
supplies
status, viewing with embedded Web server 71
status, viewing with HP Toolbox 75
supply level, print cartridges 90
support
HP Instant Support Professional Edition (ISPE) iii
system requirements
T technical support
HP Instant Support Professional Edition (ISPE) iii
telephone numbers
text quality, troubleshooting 133, 136
text, troubleshooting
three-hole punched paper
timeout settings
tire tracks, troubleshooting 135
toner
output quality, troubleshooting 132
toner cartridges. See print cartridges
Toolbox
top output bin
transparencies
tray 1
236 Index ENWW
trays
troubleshooting
configuration page printing 97
jams, causes of 110 jams, clearing print-cartridge area 110
ENWW
Troubleshooting tab, HP Toolbox 75
two-sided printing
U uninstalling
UNIX
USB port
troubleshooting Macintosh 141, 144
V
vertical spacing, setting default 168
W
warranty
Index 237
wavy paper, troubleshooting 134
Web browser requirements
Web Jetadmin
browsers supported 73 downloading 73
Web sites
customer support iii downloading software iii
HP Web Jetadmin, downloading 73
websites
weight, paper
weight, paper specifications
white lines or spots, troubleshooting;lines,
Windows
default driver settings, changing 58 driver settings 58
error messages, troubleshooting 139
installing using New Hardware Found wizard 32
wrinkled paper, troubleshooting 135
238 Index ENWW
© 2004 Hewlett-Packard Development Company, L.P.
www.hp.com/support/lj2410 www.hp.com/support/lj2420 www.hp.com/support/lj2430
*Q5956-90941*
*Q5956-90941*
Q5956-90941
다운로드
공개 링크 업데이트됨
문서 공개 링크
광고
주요 기능
1200 x 1200 DPI
28 ppm
Maximum duty cycle: 75000 pages per month
Total input capacity: 350 sheets Total output capacity: 250 sheets
Internal memory: 32 MB Built-in processor 400 MHz