User Manual
TWS EARBUDS
Package Contents
After unpacking, please confirm that it contains the following contents
▲EVE 1 TWS gaming earbuds
▲ Charging case
▲ USB charging cable
▲ User Manual
1/10
Key Function
Touch sensor
Manual operation
Automatic operation
(Outside the charging case)
Power on
Long press for 2 sec
Open the charging case
Power off
Long press for 7 sec
Put in the charging case and close
Audio is playing
Short press twice
Long press
on the left
Long press
on the right
Play/Pause
Enter & exit game mode
Music/Movie
Sound effect switch
(ringtone：Gaming mode/Gaming mode off)
(ringtone：Music mode/Movie mode )
Note: You can switch between Music/Movie sound effects only after you exit the game mode
Incoming call
Short press once
Short press twice
Long press for 2 sec
Answer the call
Hang up the call
Incoming call rejection
/switching call
2/10
Light status
The position of the earbuds light
The position of the charging case light
Earbuds light display
Light Color
position
System Status
Ice blue light and pink light
Ready to pair
flashing alternately
Ice blue light flashes slowly
Paired successfully
Ice blue breathing light
Play audio
Green breathing light
Enter game mode
Red light flashes slowly
Low battery
Charging case light display
Light Color
System Status
The corresponding power LED is on,
Charging the charging case
and the next power LED flashes
LED lights off
When the charging case is fully charged
Blue light flashes slowly
When the earbuds are charging
LED lights off
When the earbuds are fully charged
3/10
How to pair Bluetooth
After booting up and automatically forming a team,
enter the "pairing mode"
Open the phone "Settings" → "Bluetooth"
Search "EVE 1" for pairing
EVE 1
4/10
How to charge
Note: 1. Open the charging box, take out the earbuds,
and tear off the insulating film on the earbuds
2. The charging voltage of this product: 5V
Warning: The rechargeable battery contained in this product must be
properly disposed of in order to be recycled. Please do not put the battery in
the fire to avoid explosion.
Recommendation: If the lithium battery product is not in use, it needs to be
charged once every three months.
5/10
Product parameter
Brand name：GAMODIO
Product name：True Wireless Stereo gaming earbuds
Product number：EVE 1
Bluetooth name：EVE 1
Bluetooth version：VER5.1
Bluetooth distance：> 10 m
Sound effect mode：Music/Movie/Gaming
Low latency：≤ 60 ms
Frequency response：20 Hz – 20 kHz
Speaker parameters：13 mm, 32Ω
The battery capacity of the earbuds： 45 mAH
The battery capacity of the charging case： 500 mAH
Charging time of the earbuds：≤ 2 hr
Charging time of the charging case：≤ 2 hr
Product size：6.5*6.2*2.4 mm
Product weight： 58 g
6/10
Warranty description
Warranty content
1 Unable to turn on;
2 Unable to charge when connected to a power source;
3 No sound from the speaker;
4 The function is not operating normally;
5 Bluetooth cannot be connected
Warranty scope
1 From the date of receipt, within 7 days after the product has the
performance failures listed in the "warranty content", the product can be
returned and exchanged after identification, and the seller shall bear the
freight back and forth.
2 From the date of receipt, within 8-15 days if the product has the
performance failures listed in the "warranty content", the product can be
exchanged after identification, and the return freight will be borne by
each.
3 From the date of receipt, if the product has performance failures listed
in the "warranty content" within 12 months, it can be repaired free of
charge after identification, and the buyer pays the return shipping fee.
7/10
The following are not covered by the warranty
1 The product is damaged due to its own reasons;
2 Unauthorized dismantling by non-designated service providers;
3 Damage caused by force majeure such as natural disasters
4 Does not meet the above "warranty content"
5 Exceeded the warranty period
Manufacturer：深圳璽睿科技有限公司 G&O Audio Co.,LTD.
Address：shenzhen baoan district xinan sea prosperous street community
N23 excellence in times square C building Haitian road 15-3, 3005
Consulting telephone：008675586088656
8/10
Common solutions
Problem
What to do
The earbud is manually triggered ⚫
Since the left and right earbuds are not in a
to turn on, and the left and right
team state after shutting down, manually
earbuds are not connected to
triggering the power on is a non-linked power
turn on
on. The single earbuds need to be turned on
separately, and they will automatically form a
team after being turned on.
⚫
After putting back the charging case, closing
the lid, and then out of the case, the earbuds
will automatically turn on to form a team.
Earbuds don’t pair with mobile ⚫
Turn off the earbuds manually or put it in the
device
charging case and close the cover, then turn
it on again.
⚫
Turn off the power of your mobile device and
turn it on again.
No sound
⚫
Increase the volume of earbuds and mobile
devices.
⚫
Confirm the connected mobile device and
make sure that the correct device is used.
⚫
Use different music sources.
⚫
Pair with another mobile device.
⚫
If you connect two mobile devices, pause the
audio of the first mobile device, and then play
the audio from the other mobile device.
⚫
Move the mobile device within the Bluetooth
range of the earbuds (10m).
Poor sound quality
⚫
Use different music sources.
⚫
Move the mobile device to a position further
away from the earbuds and away from any
interference or obstacles.
⚫
Remove debris and earwax on the earbuds
and the sound holes of the earbuds.
9/10
Common solutions
Problem
What to do
The device cannot be charged
⚫
Insert the smaller end of the USB cable firmly
into the charging port at the rear of the
charging case, and make sure that the
connector of the cable is correctly aligned
with the charging port.
⚫
Fix both ends of the USB cable.
⚫
If the earbuds has been exposed to high or low
temperatures, wait for the earbuds to return to
room temperature, and then charge it again.
After manually turning off the ⚫
After manually turning off the Bluetooth of the
Bluetooth of the mobile device,
mobile device, the mobile phone needs to
and
the
have its own connection back function, and
Bluetooth, the earbuds don’t
the earbuds will not initiate a connection back
connect back
automatically.
No response to switching sound ⚫
Switching sound effects is divided into low-
effects
latency mode sound effects and low-latency
then
restarting
sound effects. When entering low-latency
mode, the sound effects are gaming effects.
Before exiting, long press to switch between
Music & Movie sound effects is invalid
operation; exit low-latency mode The rear
sound effect is the two sound effect switching
of Music & Movie.
There is no response to ⚫
operations such as switching
You must first confirm that the mobile device
between the first call and the ⚫
second call.
During a three-way call, the operation of
supports three-way calling.
holding or switching the call is to trigger the
Key and hold down for 2 seconds.
⚫
During a three-party call, hang up the current
call, return the first call, and double-click the
Key.
10/10
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
">
