ismartgate LITE Installation and Operating manual
Ismartgate PRO is a smart device that allows you to control and monitor your garage door and gate from anywhere using your smartphone or computer. It connects to your Wi-Fi network and lets you open, close, and check the status of your door or gate in real-time. You can also receive notifications whenever the door or gate is opened or closed, and set up schedules to automatically open and close it at specific times. Ismartgate PRO also works with Amazon Alexa and Google Assistant, so you can control it using your voice.
Διαφήμιση
Διαφήμιση
INSTRUCTIONS SETUP
Notes on safe use of door operators
There is a risk of serious or fatal injury if the ismartgate device is not used correctly.
Ø Keep children away from the ismartgate and the user interface.
Ø Do not drive through the door until it has fully opened.
Ø Observe all warnings and safety information in the installation and operating manual for the operator.
Notes on safe operation of the ismartgate device.
The ismartgate device may only be used on the operator in combination with a photocell.
CONTENTS
Legal information
Intended use
EU Declaration of Conformity
Technical Information
Functional description.
Technical Data
Interfaces and LEDs for the PRO
Interfaces and LEDs for the LITE
What’s in the Box
Considerations for installation
Download the App
Page 3
Page 3
Page 3
Page 4
Page 4
Page 4
Page 5
Page 6
Page 7
Page 11
Page 13
INSTRUCTIONS SETUP
Ismartgate Reset
Initial operation IOS
Initial operation Android
Garage installation
Garage Motor installation
Garage Button installation
Gate installation
Wireless Gate kit sensor (GWS)
Wireless Garage kit sensor (TWS)
Wired sensor (WDS)
Page 14
Page 17
Page 36
Page 54
Page 56
Page 57
Page 59
Page 60
Page 64
Page 67
2
LEGAL INFORMATION
INTENDED USE
The ismartgate may be used in combination with any compatible garage door or gate operator.
With an established network connection, the door can be opened and closed, the current door status and the door status by calendar day queried, settings can be made and administrators and users managed via the user interface (Apple, Android or computer browser).
In addition, with the corresponding accessories, a video live stream of the door system can be transmitted to the user interface.
Any use above and beyond this is deemed to be improper use and is therefore not permissible. Improper use will render all claims under warranty null and void.
Useful Links:
Website: https://www.ismartgate.com/
Manual: https://setup.ismartgate.com/
Compatibility Checker:
https://ismartgate.com/compatibility-checker/
INSTRUCTIONS SETUP
FCC / IC Statement (USA /
Canada)
Item No.: ISG-TWS &
ISG-GWS / 2401.0
This device complies with FCC rules part 15. The operation of this device is subject to the following conditions:
1) This device may cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation!
3
TECHNICAL INFORMATION
FUNCTIONAL DESCRIPTION
The ismartgate serves as an interface between end devices such as a PC (browser), Tablet or
Smartphone (Android and iOS) and any compatible garage door or gate operator. Up to three (3) operators can connect to one (1) ismartgate Pro and one (1) door operator to one (1) ismartgate
LITE. The ismartgate devices are then connected to a network using Wi-Fi or LAN.
This enables communication with the operator via a graphical user interface. Among other things, the door status can be queried and access rights assigned to users*. A web cam can be integrated via a plug-in and the door status transmitted per live stream to the user interface.
*10 users free of charge, while a paid plug-in allows you to add 100 or an unlimited number of users.
The connection can be established in two ways:
Client Mode (Standard):
The ismartgate is integrated into the home network via Wi-Fi. The end device must have a data connection with adequate bandwidth. This allows you to access and operate the user interface via the app or a browser from any location where the data connection is available.
Access Point Mode (Stand-alone):
The ismartgate functions as a Wi-Fi access point if no home network is available. A router is not required. The device can not switch automatically to the access point mode from Client Mode.
Access to user interface is only possible within the Wi-Fi radius. Remote Control is not possible.
INSTRUCTIONS SETUP
4
Network RGB
Light
INSTRUCTIONS SETUP ismartgate PRO
INTERFACES & LEDS
FRONT VIEW BACK VIEW
Power Light
Status Light
Wall Hanger
Homekit QR Code (DO NOT
REMOVE)
USB Port (Type A)
Speaker
Double LED light
DC Power Connector (5V2A)
4 pole connector (for wired sensors)
Reset Button
2 pole connector (for pre-assembled cable connectors)
LEFT SIDE RIGHT SIDE
5
INSTRUCTIONS SETUP
Network RGB
Light ismartgate LITE
INTERFACES & LEDS
FRONT VIEW
Power Light
Status Light
Wall Hanger
DC Power Connector (5V2A)
BACK VIEW
Homekit QR Code (DO NOT
REMOVE)
USB Port (Type A)
Reset Button
2 pole connector (for pre-assembled cable connectors)
LEFT SIDE RIGHT SIDE
6
INSTRUCTIONS SETUP
WHAT’S IN THE BOX
ISMARTGATE PRO GARAGE KIT ismartgate PRO
Garage Kit ismartgate PRO
Wireless Sensor
(ISG-TWS)
3x Connection Cables
LR1/Type-N 1.5V
Batteries
Power Supply Quick Start Guide
7
INSTRUCTIONS SETUP
WHAT’S IN THE BOX
ISMARTGATE LITE GARAGE KIT ismartgate LITE
Garage Kit ismartgate LITE
Wireless Sensor
(ISG-TWS)
1x Connection Cables
LR1/Type-N 1.5V
Batteries
Power Supply Quick Start Guide
8
INSTRUCTIONS SETUP
WHAT’S IN THE BOX
ISMARTGATE PRO GATE KIT ismartgate PRO
Gate Kit ismartgate PRO
Wireless Sensor
(ISG-GWS)
3x Connection Cables
LR1/Type-N 1.5V
Batteries
Power Supply Quick Start Guide
9
INSTRUCTIONS SETUP
WHAT’S IN THE BOX
ISMARTGATE LITE GATE KIT ismartgate LITE
Gate Kit ismartgate LITE
Wireless Sensor
(ISG-GWS)
1x Connection Cables
LR1/Type-N 1.5V
Batteries
Power Supply Quick Start Guide
10
CONSIDERATIONS FOR INSTALLATION
SETUP ENVIRONMENT
We recommend programming the ismartgate in a room close to home main Wi-Fi router, in a clean surface like a desk. It is also recommended to have both a
Smartphone and PC. Finally make sure you have a power outlet close by, where to power on the ismartgate device.
1. PC (Laptop) :
Use your laptop to follow this manual instructions.
2. Smartphone :
To program ismartgate from the app.
3. Router: To make sure there is a strong
Wi-Fi (2.4GHz Network) during programming.
4. Power Outlet: To power on your ismartgate device.
5. Desk: Flat surface to program the ismartgate device.
INSTRUCTIONS SETUP
11
INSTRUCTIONS SETUP
CONSIDERATIONS FOR INSTALLATION
ISMARTGATE PLACEMENT
Make sure ismartgate is placed in the area with
50% or more Wi-Fi signal strength.
Wi-Fi must be 2,4Ghs-802.11 b/g/n
(NOT 5Ghz - 802.11 ac)
Device can be placed next to
Garage Door opener or Wall
Mounted Push Button
Wall Button + ismartgate
Door motor + ismartgate
12
PROGRAMMING ISMARTGATE
Download APP (ismartgate Access)
Download the “ismartgate
Access” APP for your iPhone/iPad or for your
Android phone.
INSTRUCTIONS SETUP
13
RESETTING ISMARTGATE
THE DEVICE MUST BE POWERED ON
1
With the help of a paperclip, press the RESET button for about 10 seconds.
INSTRUCTIONS SETUP
14
RESETTING ISMARTGATE
THE DEVICE MUST BE POWERED ON
2
To check RESET has been successful, turn the ismartgate device to the front and check that “Connection & Status” lights are off.
CONNECTION
STATUS
OFF
INSTRUCTIONS SETUP
DEVICE
STATUS
OFF
15
RESETTING ISMARTGATE
THE DEVICE MUST BE POWERED ON
INSTRUCTIONS SETUP
CONNECTION STATUS
BLUE
POWER STATUS
RED
DEVICE STATUS
GREEN
3
Wait 2 minutes until you see blinking:
● Status green light
● Power red light
● Wi-Fi blue light
Then re-program the ismartgate.
If RESET is successful, re-program the ismartgate device, go to page
16
PROGRAMMING ISMARTGATE (iOS)
ISMARTGATE ACCESS APP SETUP
INSTRUCTIONS SETUP
On your phone, look for the logo of the ismartgate app and click on it to open the app
Wait for the introductory screen to go away.
Press “No, Thanks”
17
PROGRAMMING ISMARTGATE (iOS)
ISMARTGATE ACCESS APP SETUP
INSTRUCTIONS SETUP
Press “Start Configuration” Power up the ismartgate. Afterwards, press “Model Pro/Lite”
Wait 2 minutes until a sound comes on
(only in the PRO version). And Select
“Next”
18
PROGRAMMING ISMARTGATE (iOS)
PLEASE LOOK CAREFULLY AT THE NETWORK LIGHT OF THE ISMARTGATE
INSTRUCTIONS SETUP
Connection light blinks blue
You only have 15 minutes to start the configuration, if the light starts blinking red, please unplug the device and plug it in again.
Connection light blinks green
Connection light blinks red
19
PROGRAMMING ISMARTGATE (iOS)
HOME APP SETUP
INSTRUCTIONS SETUP
Press “No” 1. You should now leave the ismartgate app
2. Go to the “Home” app and follow the steps from this animation above.
20
PROGRAMMING ISMARTGATE (iOS)
HOME APP SETUP
INSTRUCTIONS SETUP
Go to your main screen and open the
“Home” app
Select the “Add Accessory” option.
21
PROGRAMMING ISMARTGATE (iOS)
HOME APP SETUP
INSTRUCTIONS SETUP
The QR code is at the back of the ismartgate device
Scan the QR code. Please make sure your phone is connected to a 2.4GHz network, the one you want the ismartgate to connect to.
If the connection is successful, press the
“Add to Home” button.
22
PROGRAMMING ISMARTGATE (iOS)
HOME APP SETUP
INSTRUCTIONS SETUP
Press the “Allow” button.
Now your ismartgate is connecting to your
Wi-Fi network. Wait 30s seconds
If after 30 seconds, the device Wi-Fi light is still in red. Reset the ismartgate and try again. To reset go to Page 14.
23
PROGRAMMING ISMARTGATE (iOS)
HOME APP SETUP
INSTRUCTIONS SETUP
1. Assign a “room” for the device (ie. garage).
2. Press the “Continue” button.
Press the “Continue” button.
Press the “Continue” button.
Press the “Continue” button.
24
PROGRAMMING ISMARTGATE (iOS)
HOME APP SETUP
INSTRUCTIONS SETUP
1. Assign a “room” for the garage Door
(ie. Garage).
2. Press the “Continue” button.
Press the “Continue” button.
Press the “Done” button.
On the Home App, you should see the doors available, but you need to finish the configuration in the ismartgate app in order to use them.
25
PROGRAMMING ISMARTGATE (iOS)
JOIN CONNECTED ISMARTGATE
INSTRUCTIONS SETUP
Connection light blinks green
Go to phone main screen and open the ismartgate app again.
You will be back to the same step you were before “Wi-Fi Connection”.
Make sure that your iphone is connected to the same Wi-Fi as the ismartgate.
Click “Next”.
The app will now look for devices to connect.
Once found, you will see an icon of your ismartgate device. Click on it.
If the “iSmartgate Access App” doesn’t find your
“ismartgate device”, follow these steps:
1) Go to your iPhone main settings
2) Go to Privacy > Local Network
3) Be sure that the “iSmartgate” has this permission enabled.
26
INSTRUCTIONS SETUP
PROGRAMMING ISMARTGATE (iOS)
ISMARTGATE ACCESS APP SETUP
4. Sensor type. Check carefully!
Press “Next”, after choosing your language Define how many doors you want to control:
1. Start “Enabling” DOOR 1
2. Scroll down.
Fill the following fields:
Door mode: Garage / Gate
Door Images: Default / Custom (you can upload pictures of your garage door open/closed)
Door name
5. Sensor ID.
Then Scroll down
27
PROGRAMMING ISMARTGATE (iOS)
HOMEKIT ONLY or ISMARTGATE + HOMEKIT CHOICE
INSTRUCTIONS SETUP
28
PROGRAMMING ISMARTGATE (iOS)
HOME + ISMARTGATE ACCESS APP SETUP
INSTRUCTIONS SETUP
A warning will pop-up. Please read carefully.
Press “Continue Setup”
29
PROGRAMMING ISMARTGATE (iOS)
HOME + ISMARTGATE ACCESS APP SETUP
INSTRUCTIONS SETUP
Define your settings as the “admin” of the device:
1. Write down your UDI in a safe place.
2. Scroll down.
Fill in the fields:
1. New Password: Define your ismartgate account
Password.
2. Retype new Password: for security reasons.
3. Contact Name: Put your name.
4. Email: Put your email address.
5. Introduce the Google security code to activate the door with Google Assistant (mandatory). Write it down in a secure location.
Click “Next”
1. Define the name of the ismartgate device itself (not the doors). This name can be changed later.
2. Press “Next”.
30
PROGRAMMING ISMARTGATE (iOS)
HOME + ISMARTGATE ACCESS APP SETUP
INSTRUCTIONS SETUP
Remote access will allow you to operate your ismartgate device from anywhere with a Smartphone, Tablet, PC and Apple
Watch.
1. Read Terms & Conditions.
2. Scroll down.
1. Accept Terms & Conditions to enable the Remote
Access.
2. Press “Next”.
Please, keep in mind that the Remote Access feature takes 10 minutes to be available to use.
The device will now reboot. Wait for approx. 2 minutes.
In the meantime, please make sure you are connected to same WiFi network as the ismartgate device.
31
PROGRAMMING ISMARTGATE (iOS)
HOME + ISMARTGATE ACCESS APP SETUP
INSTRUCTIONS SETUP
If you see the above screen, your ismartgate is successfully connected to your WiFi network.
If you see the above picture, it means the ismartgate is not connecting to your smartphone.
32
PROGRAMMING ISMARTGATE (iOS)
HOMEKIT ONLY APP SETUP
INSTRUCTIONS SETUP
A warning will pop-up. Please read carefully.
Press “Only Homekit”
33
PROGRAMMING ISMARTGATE (iOS)
HOMEKIT ONLY APP SETUP
INSTRUCTIONS SETUP
Close the “ismartgate” app.
Go to “iPhone main screen” on iPhone and open the “Home” app.
Your ismartgate device is already set up on your Apple Home App. You can control your garage from this app and using voice commands with Siri.
34
PROGRAMMING ISMARTGATE (Android)
ANDROID APP SETUP
INSTRUCTIONS SETUP
On your phone, look for the logo of the ismartgate app and click on it to open the app
Wait for the introductory screen to go away.
Press “No, Thanks”
35
PROGRAMMING ISMARTGATE (Android)
ANDROID APP SETUP
INSTRUCTIONS SETUP
Press “Start Configuration” Power up the ismartgate. Afterwards, press “Model Pro/Lite”
Wait 2 minutes until a sound comes on
(only in the PRO version). And Select
“Next”
36
PROGRAMMING ISMARTGATE (Android)
PLEASE LOOK CAREFULLY AT THE NETWORK LIGHT OF THE ISMARTGATE
INSTRUCTIONS SETUP
Connection light blinks blue
You only have 15 minutes to start the configuration, if the light starts blinking red, please unplug the device and plug it in again.
Connection light blinks green
Connection light blinks red
37
PROGRAMMING ISMARTGATE (Android)
ANDROID APP SETUP
INSTRUCTIONS SETUP
You can see the instructions to connect to the ismartgate generated network from the ismartgate app
Go to the Wi-Fi settings on your phone.
38
PROGRAMMING ISMARTGATE (Android)
ANDROID APP SETUP
INSTRUCTIONS SETUP
Select “Wi-Fi” (aka. WLAN) Settings.
Enable “Wi-Fi” settings on your phone if you haven’t done so yet.
39
INSTRUCTIONS SETUP
PROGRAMMING ISMARTGATE (Android)
ANDROID APP SETUP
If you don’t find the “iSG-xxxxxxxxx” network, please check the Wi-Fi Connection lights:
The Wi-Fi light blinks RED and
GREEN .
Please Reset the device.
The Wi-Fi light blinks another color.
Please send us an email at: [email protected]
From the list of available Wi-Fi networks, select the one starting with
“iSG-XXXXXXXXXX”.
40
PROGRAMMING ISMARTGATE (Android)
ANDROID APP SETUP
INSTRUCTIONS SETUP
A message will “pop-up” indicating the
“iSG-XXXXXXXXXX” network does NOT have internet access. Please stay connected to that network.
You can check you successfully connected to the
“iSG-XXXXXXXXXX” network if you see a message saying
“Connected” beneath the network name.
41
PROGRAMMING ISMARTGATE (Android)
ANDROID APP SETUP
INSTRUCTIONS SETUP
Open the “ismartgate” app again.
You will be back to the same step you were before connecting to
“iSG-XXXXXXXXXX” network. Press
“Next”.
The app will now look for devices to connect. Once found, you will see an icon of your ismartgate device. Click on it.
If you don’t find the device, press
“Refresh” button. If it is still not there, please check the Wi-Fi lights: go to page
37
42
INSTRUCTIONS SETUP
PROGRAMMING ISMARTGATE (Android)
ANDROID APP SETUP
Press “Start Configuration” Define how many doors you want to control:
1. Start “Enabling” DOOR 1
2. Scroll down.
Fill the following fields:
Door mode: Garage / Gate
Door Images: Default / Custom (you can upload pictures of your garage door open/closed)
Door name
4. Sensor type. Check carefully!
5. Sensor ID.
Then Scroll down
43
PROGRAMMING ISMARTGATE (Android)
ANDROID APP SETUP
INSTRUCTIONS SETUP
After scrolling down to the bottom, press “Next”.
NOTE: Do not forget to enable the second or third door in case you need them.
Define your settings as the “admin” of the device:
1. Write down your UDI in a safe place
2. Scroll down.
Fill in the fields:
Choose any Google security code to activate the door with Google Assistant (mandatory).
Write it down in a secure location. This code did
NOT exist before this moment.
Click “Next” 44
PROGRAMMING ISMARTGATE (Android)
ANDROID APP SETUP
INSTRUCTIONS SETUP
Fill in the fields:
1. Introduce your preferred name for ismartgate device (it can be changed later)
2. Wi-Fi Mode: Client Mode (to connect to your home Wi-Fi network) / Stand Alone (to have ismartgate create its own
Wi-Fi network)
3. Configuration mode: Automatic (recommended) / Manual (to put the information from your Wi-Fi network manually)
Scroll down
NOTE: DO NOT HIT NEXT YET.
Press scan Wi-Fi networks if you chose the
“Automatic” (recommended) option.
Wait for the list of available Wi-Fi networks to display.
On the list of available “Wi-Fi” networks, select your home Wi-Fi network (the network where you want your ismartgate device to connect). Please know that it needs to be a 2.4GHz network.
We strongly recommend to select only the Wi-Fi with “green” color. If your Wifi appears in “red”, please try to improve its signal.
45
PROGRAMMING ISMARTGATE (Android)
ANDROID APP SETUP
INSTRUCTIONS SETUP
1. Once the Wi-Fi network is selected, put the password of your “Wi-Fi” network.
2. Press “Next”
Remote access will allow you to operate your ismartgate device from anywhere with a
Smartphone, Tablet, PC and Apple Watch:
1. Read Terms & Conditions
2. Scroll down.
1. Accept Terms & Conditions to enable the
Remote Access.
2. Press “Next”.
Please, keep in mind that the Remote Access feature takes 10 minutes to be available to use.
46
PROGRAMMING ISMARTGATE (Android)
ANDROID APP SETUP
INSTRUCTIONS SETUP
Scroll down and check the color of your ismartgate device connection light
1. Read the 4 possible options for the device "Connection Status".
2. Press "Finish"
The device will now reboot. Wait for approx.
2 minutes. In the meantime, please make sure you are connected to same Wi-Fi network as the ismartgate device 47
PROGRAMMING ISMARTGATE (Android)
ANDROID APP SETUP
INSTRUCTIONS SETUP
The device is successfully connected to the selected Wi-Fi network and has an internet connection.
The device is successfully connected to the selected Wi-Fi network but does not have an internet connection.
The device has been setup in
Access Point mode (Standalone)
Every 10 minutes the device will check automatically if there is an internet connection
The device can't connect to the selected
Wi-Fi network (Wi-Fi password might be incorrect) or the Wi-Fi signal is not strong enough
To reset the device
48
PROGRAMMING ISMARTGATE (Android)
ANDROID APP SETUP
INSTRUCTIONS SETUP
Go to Settings on your phone.
Select “Wi-Fi” (aka. WLAN) Settings.
Enable “Wi-Fi” settings on your phone if you haven’t done so yet.
49
PROGRAMMING ISMARTGATE (Android)
ANDROID APP SETUP
INSTRUCTIONS SETUP
From the list of available Wi-Fi networks, select the one where you already connected your ismartgate device.
Check that you are successfully connected to that network. For that, look for the “Connected” message under the network name.
50
PROGRAMMING ISMARTGATE (Android)
ANDROID APP SETUP
INSTRUCTIONS SETUP
If you see the above screen, your ismartgate is successfully connected to your WiFi network.
If you see the above picture, it means the ismartgate is not connecting to your smartphone.
51
PROGRAMMING ISMARTGATE (Android)
JOIN AN ALREADY CONFIGURED ISMARTGATE
INSTRUCTIONS SETUP
Contact to your ismartgate Administrator to ask for:
1) UDI
2) Login (default is admin)
3)Password (default is blank)
Once you have these credentials, press “Done“.
Wait for your phone to connect with your ismartgate.
52
PROGRAMMING ISMARTGATE (Android)
JOIN AN ALREADY CONFIGURED ISMARTGATE
INSTRUCTIONS SETUP
If you see the above screen, your ismartgate is successfully connected to your WiFi network.
If you see the above picture, it means the ismartgate is not connecting to your smartphone.
53
INSTALLING ISMARTGATE
GARAGE INSTALLATION
GARAGE DOOR
OPENER
We recommend wiring the ismartgate directly to your Garage Door Opener if you don’t have push buttons or if power outlets aren’t close to push buttons.
INSTRUCTIONS SETUP
GARAGE WALL PUSH
BUTTON
We recommend wiring the ismartgate to your wall mounted push button if you have power outlets nearby (less than 30 inches / 1 meter)
54
INSTRUCTIONS SETUP
INSTALLING ISMARTGATE
GARAGE MOTOR INSTALLATION
GARAGE DOOR OPENER
Installation for 1 Door Installation for 2 Doors Installation for 3 Doors 55
INSTRUCTIONS SETUP
INSTALLING ISMARTGATE
GARAGE MOTOR PLACEMENT AND INSTALLATION
UNDER THE MOTOR
ON TOP OF THE MOTOR ON THE SIDE OF THE MOTOR
To know how to connect the ismartgate to your specific motor, please go to the Compatibility Checker: https://ismartgate.com/compatibility-checker/
56
INSTRUCTIONS SETUP
INSTALLING ISMARTGATE
PUSH BUTTON INSTALLATION
GARAGE DOOR OPENER
Installation for 1 Door Installation for 2 Doors Installation for 3 Doors 57
INSTRUCTIONS SETUP
INSTALLING ISMARTGATE
PUSH BUTTON INSTALLATION
Unscrew the push button from the wall.
Unscrew (not completely) the 2 screws from your opener.
Wire the ismartgate outputs to the screws on your push button.
Polarity does NOT matter. Then screw again.
Screw your push button back.
58
INSTALLING ISMARTGATE
GATE MOTOR INSTALLATION
INSTRUCTIONS SETUP if your ismartgate does not fit inside the gate operator / control box, we strongly recommend to put the ismartgate device inside an ismartgate IP waterproof enclosure
To know how to connect the ismartgate to your specific motor, please go to the
Compatibility Checker: https://ismartgate.com/compatibility-checker/
59
ISMARTGATE WIRELESS SENSORS
ISMARTGATE WIRELESS MAGNETIC SENSOR (GWS) INCLUDED IN THE GATE KIT
INSTRUCTIONS SETUP
Transmitter: 2401 Mhz
Type: Magnet
temperature indicator: included
Range: 50 ft
Operating temperature: -25ºC / 70ºC
Batteries: 2x Type-N (1.5V)
Life span: 18 months
Waterproof: Yes
60
ISMARTGATE WIRELESS SENSORS
ISMARTGATE WIRELESS MAGNETIC SENSOR (GWS) INCLUDED IN THE GATE KIT
INSTRUCTIONS SETUP
Test the sensor: move the sensor as the images above and see if the ismartgate status light
(yellow) blinks rapidly
61
INSTALLING ISMARTGATE SENSORS
COMPATIBLE GATES WITH THE GWS SENSOR
SLIDING
FOLDING
SENSOR PLACEMENT: SENSOR PLACEMENT:
INSTRUCTIONS SETUP
SWING
SENSOR PLACEMENT:
62
INSTALLING ISMARTGATE SENSORS
COMPATIBLE GARAGE DOORS WITH THE GWS SENSOR
ROLLER SIDE-SECTIONAL
SENSOR PLACEMENT: SENSOR PLACEMENT:
INSTRUCTIONS SETUP
SWING
SENSOR PLACEMENT:
63
ISMARTGATE WIRELESS SENSORS
ISMARTGATE WIRELESS TILT SENSOR (TWS) INCLUDED IN THE GARAGE KIT
INSTRUCTIONS SETUP
Transmitter: 2401 Mhz
Type: Gravity Sensor
temperature indicator: included
Range: 50 ft
Operating temperature: -25ºC / 70ºC
Batteries: 2x Type-N (1.5V)
Life span: 18 months
Waterproof: Yes
64
ISMARTGATE WIRELESS SENSORS
ISMARTGATE WIRELESS TILT SENSOR (TWS) INCLUDED IN THE GARAGE KIT
Test the sensor: move the sensor as the images above and see if the ismartgate status light (yellow) blinks rapidly
INSTRUCTIONS SETUP
65
INSTALLING ISMARTGATE SENSORS
COMPATIBLE GARAGE DOORS WITH THE TWS SENSOR
SECTIONAL
SENSOR PLACEMENT:
INSTRUCTIONS SETUP
UP-AND-OVER
SENSOR PLACEMENT:
66
INSTALLING ISMARTGATE SENSORS
ISMARTGATE WIRED MAGNETIC SENSOR (WDS) INCLUDED IN THE MINI WIRED KIT
INSTRUCTIONS SETUP
Place this part on the
Gate / Garage Door
Place this part on the wall
Output: Normally Open (NO)
Max. switching voltage: 100V dc
Max. contact rating: 10W
Max. switching current: 0.5A
Max. carrying current: 1.0A
Temperature: -20ºC / 80ºC
Material: ABS
Contact life: 1x10^8
Waterproof: Yes - IP65
Cable gauge: 24# AWG (2 cables)
Sensor connection instructions for the ismartgate PRO:
DOOR 1 DOOR 2 DOOR 3
67
INSTALLING ISMARTGATE SENSORS
ISMARTGATE WIRED MAGNETIC SENSOR PLACEMENT ON A ROLLER GARAGE DOOR
INSTRUCTIONS SETUP
A) Installation on a Roller Door
Attach your magnetic wired sensors to your roller door as per drawing below.
PLACE THE SENSOR ON THE LOWER PART OF YOUR ROLLER
DOOR.
MAKE SURE THE GAP BETWEEN
PART B AND PART A IS LESS THAN
1.25 INCH (3 CM).
68
INSTRUCTIONS SETUP
INSTALLING ISMARTGATE SENSORS
ISMARTGATE WIRED MAGNETIC SENSOR PLACEMENT ON A SECTIONAL GARAGE DOOR
B) Installation on a Sectional Door
Attach your magnetic wired sensors to your Sectional Door as per drawing below.
PLACE THE SENSOR IN THE SECTION AT THE BOTTOM OF YOUR DOOR.
MAKE SURE THE GAP BETWEEN
PART B AND PART A IS LESS THAN
1.25 INCH (3 CM).
69
INSTALLING ISMARTGATE SENSORS
ISMARTGATE WIRED MAGNETIC SENSOR PLACEMENT ON A SLIDING GATE
C) Installation on a Sliding Gate
Attach your magnetic wired sensors to your sliding gate as per drawing below.
INSTRUCTIONS SETUP
PLACE THE SENSOR IN THE MIDDLE PART OF YOUR SLIDING GATE.
MAKE SURE THE GAP BETWEEN
PART B AND PART A IS LESS THAN
1.25 INCH (3 CM).
70
INSTALLING ISMARTGATE SENSORS
ISMARTGATE WIRED MAGNETIC SENSOR PLACEMENT ON A SWING GATE
D) Installation on a Swing Gate
Attach your magnetic wired sensor to your swing gate as per drawing below.
INSTRUCTIONS SETUP
PLACE THE SENSOR IN THE MIDDLE PART OF YOUR SLIDING GATE.
MAKE SURE THE GAP BETWEEN
PART B AND PART A IS LESS THAN
1.25 INCH (3 CM).
71
CONGRATULATIONS!
Your installation is done.
www.ismartgate.com
Λήψη
Δημόσιος σύνδεσμος ενημερώθηκε
Ο δημόσιος σύνδεσμος για τη συνομιλία σας ενημερώθηκε. You may view and manage your chat links after registration here.
Δημόσιος σύνδεσμος εγγράφου
Διαφήμιση
