advertisement
USER MANUAL
Control Functions
(1) Previous Track
(2) Volume Up
(3) Skip Track
(4) Volume Down
(5) Power & Pause/Play
(6) LED Indicator
Connection Ports
(9)
(7) 3.5mm line-in port
(8) USB charging port
(9) Reset button
•
Basic Operation
● To Turn ON/OFF: Press the (5) Button to turn ON, and to turn OFF hold down (5) until the indicator light turns red.
● To CONNECT to devices without Bluetooth: Connect speaker to the device using the line-in cable provided. (Note: The buttons on the speaker will not function when connected via a cable)
● To RECHARGE the battery: Connect speaker to a USB power source/plug using the USB Cable provided. (Note: Speaker can still be used whilst charging)
● For CONFERENCE calling: Connect speaker to a mobile phone using the line-in cable provided.
BLUETOOTH CONNECTION:
● Switch on your device’s Bluetooth, and search for devices but ensure all other devices are switched off.
● Simply click the (5) button on the Beat Box and the speaker will automatically go into pairing mode.
● After searching on your device’s Bluetooth, select ‘Beat Box’ from the list of found devices. Some devices may require you to press
‘Connect’ or ‘Yes’. (Note: If prompted for a pass key, enter 0000)
● When your device and the Beat Box are paired correctly the indicator light (6) will stop flashing and remain steadily lit.
Troubleshooting
PROBLEM
Speaker turns off automatically
No connection
Not functioning properly
SOLUTION
● Recharge the battery.
● Ensure battery is charged and device is within range of the speaker.
● Make sure the device is correctly paired via
Bluetooth.
● Restart the speaker.
● If this does not work then push the reset button on the back of the speaker, by inserting a narrow object into the hole.
Learn more...
You can find out more about the Beat Box at www.desaia.co.uk
advertisement
Related manuals
advertisement