30022F | User manual | Spec Sheet - 30022 VRJ - Pellerin Milnor Corporation
Add to my manuals
2 Pages
Milnor 30022F, a rigid-mount washer-extractor with a 60 lb (27 kg) capacity, offers efficient and versatile laundry solutions. Equipped with 7 speeds, E-P PLUS® programmable controller, and a single-motor inverter drive, it ensures precise washing and extracting cycles. Its tall lifting ribs, tapered roller bearings, and high M.A.F. (Mechanical Action Factor) deliver exceptional wash quality. Six liquid chemical injection ports and a fresh-water flushing chemical manifold enable effective detergent and chemical distribution. Discover the power of Milnor 30022F for your laundry needs.
advertisement
30022 VRJ
60 LB .
(27 KG ) C APACITY
R IGID -M OUNT W ASHER -E XTRACTOR
S PECIFICATION S HEET
LEGEND
C Cold water inlet, .75” (19 mm) GHT
D
Drain to rear, 3” (76 mm) pipe socket joint
E Main electrical connection
F
G
Foundation pads, anchor bolt holes
.8125” (21 mm) diameter
Hot water (chemical flushing), .75”
(19 mm) GHT
H Hot water, .75” (19 mm) GHT
L1 Standard soap chute
L2 Liquid supply inlets F LOOR REQUIREMENT 12” MINIMUM
RECOMMENDED ▼,
MECHANICAL SPECIFICATIONS
Capacity – lbs (kg)
Cylinder Diameter x Depth – ins (mm)
Cylinder Volume – cu. ft. (L)
Door Opening – ins (mm)
Machine Dimensions
(W x D x H) – ins (mm)
Shipping Dimensions
(W x D x H) – ins (mm)
Motor – HP (kW)
Wash Speeds – RPM
Distribution Speed – RPM
Extraction Speeds – RPM
Extraction G-Force
Static Weight – lbs (kg)
Max. Dynamic Load RMS - lbs (kg)
Frequency (Hz)
60 (27)
30 x 22 (762 x 559)
9 (255)
15.5 (394)
34.5 x 55.56 x 57.68
(876 x 1412 x 1466)
40 x 64 x 63
(1016x1625x1600)
5 (3.72)
38-43
65
420-685
200
1344 (610)
2120 (961)
11.4
Water Pressure (Required) – psi (bar) 10-75 (.68-5.1)
Water Valve Cv Rating – gal/min (L/min) 5.8 (22)
Minimum Recommended Distance
Between Machines – ins (mm)
6 (152)
ELECTRICAL SPECIFICATIONS
Voltage Running
Amps
Fuse
(Amps)
Circuit Breaker
(Amps)
220/3/50-60
208,240/1/60
208, 240/3/60
7
9, 8
8, 7
FRN20
FRN20
FRN20
20
20
20
415/3/50 4.5 FRS15 15
480/3/60 3.5 FRS15 15
See Fuse and Wire Size manual MAEFUSE1BE for safety information. Contact factory for electrical specifications if equipped with Electric Heat option.
▼ See dimensional drawing for complete details.
It is the sole responsibility of the owner/user to assure that the floor and/or any other supporting structure exceeds not only all applicable building codes, but also that the floor and/or any other supporting structure for each washer-extractor or group of washer-extractors has sufficient strength and rigidity (i.e., a natural or resonant frequency many times greater than the rotational machine speed with a reasonable factory of safety) to support the weight of all the fully loaded machine(s) including the weight of the water and goods, and including the published 360º rotating sinusoidal RMS forces that are transmitted by the machine(s). Contact the factory for additional machine data for use by a structural engineer.
B22SS13001/14033 Page 1 of 2
30022 VRJ
60 LB .
(27 KG ) C APACITY
R IGID -M OUNT W ASHER -E XTRACTOR
S PECIFICATION S HEET
Standard Features:
• RinSave
®
water saving technology
• 7 speeds (2 wash, 1 distribution, 1 RinSave, 3 extract)
• E-P PLUS
®
programmable controller
• Back-lit LCD display
• Single-motor inverter drive
• Tall, lifting ribs
• Tapered roller bearings
• High M.A.F. (Mechanical Action Factor)
• Large cylinder perforations
• Fresh-water flushing chemical manifold
• Auto tension V-belt drive
• Six (6) liquid chemical injection ports
• Control reads in English/second language
• 5-year limited warranty on frame, cylinder & shell
Why Purchase Milnor?
• Larger cylinder volume than most competitive similar sized washer-extractors provides greater productivity. More linen washed per day, or fewer hours required to process. BENEFIT: Saves labor.
• Greater cylinder perforated-area generates better wash quality, better rinsing and
better extraction. BENEFIT: Better extraction saves dryer fuel.
• Faster process times reduce fabric wear, promoting longer linen life!
BENEFIT: Saves linen replacement costs.
• High perforated ribs provide excellent lifting.
BENEFIT: Greater mechanical action leads to better wash quality.
• 200-G high extract provides excellent moisture removal. Lower extract speeds are available for uniforms, delicate textiles and blended fabrics.
BENEFIT: Better extraction saves dryer fuel.
• E-P Plus Controller with back-lit LCD display allows operator to choose formulas from real words, not codes. Standard controller features English/Spanish (other languages optional). Controller also provides diagnostic and error messages.
Shortens training time of new employees.
BENEFIT: Fewer operator errors.
• Superior product support through local, highly-skilled dealers.
BENEFIT: Faster repairs mean less downtime.
Contact Milnor for your local, authorized dealer:
Pellerin Milnor Corporation
P.O. Box 400 ● Kenner, LA 70063 t: 504-467-9591 ● f: 504-468-3094
Optional Features:
• Steam
• 3 compartment flushing supply injector
• Prison package
Safe chemical injection
Superior cylinder design
Solid industrial frame
B22SS13001/14033 Page 2 of 2
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement