Please Read the Manual First before Operation

PT590AU

5.1 Channel 350 Watts Built-In AM/FM Radio/

USB/SD Card HDMI Amplifier Receiver

WWW.PYLEAUDIO.COM

Table of Contents

Important Safety Information

For Customers

Caution

System Features

Front Panel Function

Front Panel Display Window

Real Panel Connectors

Using the Remote Control

Battery Installation

Note

Basic Operation

Turn on/off the Power

Master Volume Control

Side Left Channel Volume Control

Side Right Channel Volume Control

Center Channel Volume Control

Subwoofer Volume Control

How to Adjust Treble

How to Adjust Bass

How to Play HDMI

How to Play AUX

How to Play USB/SD

Select USB/SD Input Mode

USB/SD Control

How to Play Tuner

Select Program

Listen to the Preset Program

Memory Program

How to Mute

Introduction of DSP Control Key

Introduction of Source Output Selector Area

Trouble Shooting 5

1

2

2

3

1

1

4

Important Safety Information

For Customers

Thank you for purchasing the HDMI receiver. We strongly recommend that you carefully study the operating instructions before attempting to operate the unit and that you note the listed safety information.

Caution

You are cautioned that changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains and etc. Do not place lighted candles on the apparatus.

To prevent fire or shock hazard, do not place objects filled with liquid, such as vases, on the apparatus.

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble.

Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunlight or fire.

System Features

5.1 Channel Amplifier.

4 HDMI Input Port and 1 HDMI Output Port for HDMI Receiver and HDMI Switcher.

One Key Switch Function Between HDMI Receiver and HDMI Switcher.

Built-In AM/FM Radio.

Built-In USB and SD Audio.

2 MIC Input, Treble and Bass of MIC Adjustable, Independent MIC Volume Control.

Over Current Protection, Short Circuit Protection And Over Voltage Protection.

12 Preset Radio Station.

Full Remote Control.

VFD Display.

Power Output: 300 Watts LR Channel (4 Ohm) 50W for Center, Surround L and Surround R(4 Ohm).

Inout Selector: 4 in 1 out HDMI Selector, 3 Stereo RCA Selector, 1AM/FM Radio, 1 USB/SD, 2 Microphone Input.

Output: 5 Channel Speaker Output Terminal for L, R, Center, SL, SR, And 1 line Out for Subwoofer.

Total Power Consumption: 350W.

Front Panel Function

1

2 3 4 5

6

7 8 9 10

11

12 13 14

1.Tuner band adjustment knob.

2.AUX

1/AUX2/AUX3

3.FM/AM

4.USB/SD input selector.

5.HDMI1 input selector.

6.VFD display window.

7.HDMI2 input selector.

input selector.

input selector.

15 16 17 18

8.HDMI3 input selector.

9.HDMI4 input selector.

10.Mute control selector.

11.Master volume adjustment knob.

12.Power on/off selector.

13.Mic echo adjustment knob.

14.Mic treble adjustment knob.

19 20 21 22

15.Mic bass adjustment knob.

16.Mic1 input socket.

17.Mic2 input socket.

18.Mic1 volume adjustment knob.

19.Mic2 volume adjustment knob.

20.Mic volume adjustment knob.

21.SD/MMC card input socket.

22.USB input socket.

.1.

Front Panel Display Window

Name

1.STEREO

2.AC-3 PROLOGIC

3.DSP

4.DIGITAL DISPLAY

5.KHz MHz

AUX/TUNER/USB/SD INPUT

HDMI INPUT

DSP STATE ICON

KHz MHz ICON

6.SPECTRUM DISPLAY

Real Panel Connectors

TV or video display

Function

Light up when AUX1/2/3, FM/AM,USB/SD

Light up when 5.1 channel or HDMI1/2/3/4

Light up when play DSP effect.

input.

input.

Light up to display value of current input mode.

Light up when tuner input is selected and indicates the value on the display for KHz/MHz.

Light up to display the spectrum of different channel.

Stereo input

DVD or HDMI source

Power

PT590AU

DIGITAL HDMI RECEIVER

3 4

Subwoofer Speaker system

Side left Front left Front right Side right

Center

.2.

Using the Remote Control

1 2

3

4

5

6

7

8

9

11

12

10

13

14

15

16

17

18

19

20

21

22

23

1.Power on/off control selector

2.HDMI audio switch selector

3.Tuner band control selector

4.Tuner memory selector

5.Channel source output selector

6.Treble volume increase selector

7.Left balance selector

8.Treble volume decrease selector

9.USB/SD play selector

10.USB/SD-skip selector

11.Side left volume adjustment selector

12.Center volume adjustment selector

13.Tuner number selector

14.Input mode selector

15.DSP control selector(live, hall, church)

16.Bass volume increase selector

17."Mute mode" control selector

18.Master volume control selector

19.Right balance selector

20.Bass volume decrease selector

21.USB/SD pause selector

22.Side right volume adjustment selector

23.Subwoofer volume adjustment selector

Battery Installation

1.On the back of the remote control, push the tab and lift off the battery cover.

" " marks in the battery case, then insert the new batteries.

3.Align the cover keys with the case holes and press the cover back into place. The tab should click when the cover is locked.

" " " " " "

4.Test the unit by pressing POWER or any mode key. If the batteries are inserted correctly, the selected mode key will blink once.

Note

Do not leave the remote control in an extremely hot or humid place.

Do not use a new battery with old ones.

Do not mix manganese batteries with other kinds of batteries.

Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.

If you do not intend to use the remote control for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

.3.

Basic Operation

Turn on/off the Power

Press " " key to control the power on and off.

Master Volume Control

Press the " " or " " Key to adjust the main channel volume.

Side Left Channel Volume Control

Press " "

Side Right Channel Volume Control

Press " "

Center Channel Volume Control

Press " "

Subwoofer Volume Control

Press " "

How to Adjust Treble

Press " " key to adjust the treble output of the main channel.

How to Adjust Bass

Press " " key to adjust the bass output of the main channel.

How to Play HDMI

Make sure HDMI1/2/3/4 connection lines are correct, Press the

How to Play AUX

" / / / " key to play HDMI.

Make sure AUX1/2/3 connection lines are correct, Press the " / /

How to Play USB/SD

1.Select USB/SD Input Mode

Make sure USB or SD card insert to the USB/SD socket, Press the

2.USB/SD Control

" key to play AUX.

" " key to select USB/SD input mode.

" ": Control the USB/SD play.

" ": Control the USB/SD pause.

" ": Control the USB/SD skip.

How to Play Tuner

1.Select Program

Use " " key to select FM/AM band. Press the " " key to adjust the band of tuner. Press the " " key for 2 seconds, the FM will search automatically. You can press the

2.Listen to the Preset Program

" " key once to stop the function .

Press the number keys " " to select the radio program that you already saved. Once selected, display the radio program's frequency in the memory area.

screen will

3.Memory Program

When you receive a clear radio program, press the " " key first, and then the screen displays the Memory " icon. Press one of the 12 " " number key on the remote control to select the memory station. If you want to extract the channel you saved, just press the number key you selected.

How to Mute

Press " " key to turn sound off/on.Press again to restore the audio to the original level.

Introduction of DSP Control Key

Press the key " " repeatedly to switch to different operations: Live, Hall or Church. All the above functions can give different sound effects.

Introduction of Source Output Selector Area

Press

" "

" " key to receive 5.1 channel(default mode); Press key to receive 2.1 channel(SL, SR, CEN mute).

" " key to receive 3.1 channel(SL, SR mute); Press

.4.

Trouble Shooting

Use this chart to help you solve operational problems. If there are any problems that can not be solved, please contact Service Center.

.5.