Seura Hydra HY-27.5 User manual

Add to My manuals
13 Pages

advertisement

Seura Hydra HY-27.5 User manual | Manualzz

H Y-19 . 5 & H Y- 2 7. 5

U S E R M A N U A L

Hydra

I N D O O R W AT E R P R O O F T E L E V I S I O N

w w w.seura .com

Thank you for selecting a Séura Hydra Waterproof Television.

This product has been inspected and packaged carefully before shipment.

Please read this guide before beginning installation.

Please keep this manual for future reference.

Information in this manual is subject to change without prior notice.

FCC Information

This equipment has been tested and found to comply with limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and radiates radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

There is no guarantee that interference will not occur in a particular installation. If this equipment causes unacceptable interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced Radio/TV technician for additional help.

WARNINGS

To reduce the risk of fire, electrical shock and other injuries, keep these safety precautions in mind when installing, using, and maintaining your Television. The socket-outlet should be installed near the equipment and be easily accessible. The TV should be connected to a grounded GFCI protected main socket outlet.

WARNING: If you manipulate against the recommended usage, serious injury or death to user may result.

To protect against electric shock, do not immerse the power cord, power plug, or product in water or other liquid.

Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.

Close adult supervision is necessary when any product is used by or near children.

Do not operate any product with a damaged cord or plug or operate it after the appliance malfunctions or has been damaged in any manner.

Do not use the product close to any heat sources such as radiators, heat registers, stoves, or other products that produce heat.

Do not let the power cord come in contact with hot surfaces.

If you notice any smoke or scorched smell near the product, unplug power cord and refer to qualified personnel for service and/or repair.

Do not use or place any combustible or flammable substances near the product.

To electrically disconnect the product, turn OFF the product, then remove the electrical power plug from the outlet.

Do not place heavy articles on or step on the product.

Do not place the product on an unstable cart, stand, tripod or table.

Do not use this product for other than intended use.

This Séura product is only intended for use indoors.

For added safety during a lighting storm, or when this product is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna.

Specifications of this product are subject to unannounced changes; this manual may thus not reflect the current technical status.

2

Before Installation

WARNING: READ ALL INSTRUCTIONS AND REVIEW ALL DRAWING SHEETS

BEFORE ATTEMPTING TO INSTALL OR SERVICE THIS PRODUCT.

When installing and during use of this product, basic safety precautions should always be followed to reduce the risk of fire, electric shock and/or injury to persons including the following:

• Inspect the desired location for installation and be aware of all electrical wiring pathways, water pipes, gas lines, or other potentially hazardous conditions that may exist to protect from accidental damage during creation of on-site conditions.

• Ensure all required electrical specifications are adhered to and have been installed by the appropriate individuals and are code approved.

• Ensure all framing requirements, if needed, have been completed to building code and pose no structural issues.

• It is REQUIRED that this product is plugged into an electrical outlet protected by a Ground Fault Circuit Interrupter (GFCI) to protect against electric shock, fire, and/or injury. Failure to do so will void any warranty for this product.

• Only qualified individuals should attempt to service the product. Removing covers can expose you to high voltage and other dangerous conditions.

• To protect against electric shock, do not immerse the power cord, power plug, or product in water or other liquid.

• Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.

• Close adult supervision is necessary when any product is used by or near children.

• Do not operate any product with a damaged cord or plug or operate it after the appliance malfunctions or has been damaged in any manner.

• Do not let the power cord come in contact with hot surfaces.

• To electrically disconnect the product, turn OFF the product, then remove the electrical power plug from the outlet.

• Do not use this product for other than intended use.

• This Séura product is only intended for use indoors.

• Retain this manual in a safe place for future reference.

3

4

Contents

B E F O R E U S E

2-Part Product Anatomy ..............................................................................................................5

I N S T A L L A T I O N A N D S E T U P

Display Requirements ..................................................................................................................6

Setup ...........................................................................................................................................7

Input/Output Overview ......................................................................................................7

Remote Control Functions .................................................................................................7

Installation ...............................................................................................................................8-11

Making Connections ..................................................................................................................12

M E N U S A N D S E T T I N G S

On Screen Display Menu (OSD) .................................................................................................13

Input Source Selection ...............................................................................................................13

Video Settings ............................................................................................................................13

Advanced Video Settings ...........................................................................................................14

Audio Settings ............................................................................................................................14

TV Settings .................................................................................................................................15

Setup Menu ................................................................................................................................15

Parental Menu ............................................................................................................................16

I N T E G R A T I O N A N D C O N T R O L

RS-232 Settings and Command Table.......................................................................................17

IR Commands ............................................................................................................................18

T R O U B L E S H O O T I N G A N D T E C H N I C A L D E T A I L S

Troubleshooting ..........................................................................................................................19

Technical Features .....................................................................................................................19

Ports and Media Support ...........................................................................................................20

Ports ................................................................................................................................20

Special Features ..............................................................................................................20

USB Media Support .........................................................................................................20

Warranty .....................................................................................................................................21

BACK BOX

FRAMING

MEMBER

SCREW-

MOUNTING

SLOTS (4,

2 PER SIDE)

GRAVITY LOCK MOUNTS

2-Part Product Anatomy

FRAMING MEMBER

SCREW-MOUNTING

SLOTS (4)

INPUT/OUTPUT/LOW VOLTAGE

PASS-THROUGH PORT

TV ASSEMBLY

GRAVITY

LOCK

GUIDE

SLOTS (4)

LOW VOLTAGE

POWER LOCATION

INPUTS/OUTPUTS

GLASS FACE

ON-UNIT CONTROL BUTTONS

Power

Input

Menu

Channel

Channel

Down

Volume

Down

Up

Up Volume

Note: Buttons are labeled on product. 19" shown.

Buttons are located on the side of the unit on the

27" model.

5

6

Display Requirements

Operation and Storage Requirements

The ambient temperature for operating the device is between 41 to 122 degrees Fahrenheit. Do not install the device in the proximity of heat sources, such as heating pipes, heaters, furnaces or other devices that radiate heat. Mount the device in such a way that it is protected against moisture.

Trouble free operation is ensured up to 75% air humidity. To prevent fire or electric shock, never allow liquids to enter the unit. The product must be stored in dry and well-ventilated rooms, without extreme temperature fluctuations. Heat sources and aggressive active substances may not be stored in the proximity of the device. The required storage temperature is 32° F - 140° F at an air humidity of 5 - 85% RH non-condensing. The device must be stored in the complete packaging, as delivered.

Installation Environment

Avoid direct light or sun exposure, direct proximity to heat sources, outdoor installation. The product is specifically designed for indoor use only. There is the danger of fire and of electric shock and damage to the device if it is operated outdoors. Do not place any heat sources such as radiators and heat registers, etc. near the monitor. To reduce eye strain, avoid installing the Séura Television against a bright background such as a window. Position the monitor at the height of your eye level. Position the monitor directly in front of you at a comfortable viewing distance.

Installation

Have this product installed by qualified personnel only. Use the mounting systems which are specified or recommended by Séura. Install the product in a way that it is fixed properly and take care that children are not exposed to danger. Please take extra care during installation, avoid impacts. Before cabling your monitor, check that the power is off. To avoid any possibility of electric shock, always connect your equipment to properly grounded outlets. Use of power cords or adapters other than those provided may cause fire or malfunction. Place this product as close to the power socket as possible. Leave enough space to insert and remove the power plug on demand. Even if you switch off the product with your remote control, power is not cut off unless the power cord is unplugged.

The device may only be operated with the provided power adapter. The rated voltage is indicated on the product label. The device is factory-set to the optimal operating voltage (see Technical Specification). Use only power cords and plugs that are suitable for your local electrical outlets. Install the power cords in such a way that it does not obstruct anyone. Ensure furthermore that the cable is not clamped and that it cannot be pulled out accidentally from the power adapter. Do not install the power cords in the proximity of heating elements and never place heavy items on the cable or power adapter. Do not modify or arbitrarily repair the power cords.

CAUTION

Do not use any power cords or adapters other than those provided with this product! Use of power cords or adapters other than those provided with this product may cause fire, electric shock or malfunction. If several kinds of power cords are provided with this product, use the one that fits your power socket. Do not let the adapter hang down while using. Do not cover or wrap the adapter. Leave space around the adapter to prevent overheating. The individual components can be destroyed, if the polarity is reversed or an incorrect connection is used. A goodwill replacement is not possible in such cases, since each device is submitted to meticulous quality inspections prior to shipping. The connecting plugs must be attached in such a way that the connector is held firmly. Have trained technical personnel install the electrical facilities necessary for mounting. The power adapter must be installed in ventilated areas due to heat emission. Connect the power cord to a grounded outlet. Never cut or damage the power cord.

Please disconnect the device from the power adapter in the following cases:

1. The device is out of use for a lengthy period.

2. The device malfunctions or displays other unusual features, necessitating maintenance work.

3. During a thunderstorm.

Please plan the positioning of the power adapter and the source cables before proceeding with the structural measures and positioning of the Séura

Television. Observe the protection zones when placing the power adapter! Please bear in mind that the power adapter has to be placed beyond the inset due to heat emission.

NOTE

The power cable should be adequately secured to prevent it from becoming unstable and/or falling. Make sure the power source circuits are properly grounded. Use the supplied power cord in order to connect it to the power source. If your installation requires a different power cord, be sure to use an officially approved power cord displaying the mark of the safety agency that defines the regulations for power cords in your country.

Ensure that your installation complies with your national and local safety rules. Any servicing, adjustment, maintenance or repair must be performed only by service-trained personnel.

Setup

Before using the device please check the following contents of the box for completeness:

Back Box

50' Low-Voltage

Power Cable

Low-Voltage Power

Adapter and Cable guide cc last mute sleep zoom ok input display menu exit channel enter volume

2010 Remote Redesign

Final www.seura.com

1.800.95.SEURA

PH. 920.857.9069

FAX 920.857.9490

Reseller Sales Order / Inv. Number Date Created

15 MAR 2011

S-R-1913-19.5-HY.5

19"(W) x 13-1/4"(H) Standard Hydra Waterproof Television with a 19" LCD and Glass Color Choice

Revised Date

6 JAN 2012

19" GLASS

DIMENSION

1314" GLASS

DIMENSION

BOTTOM VIEW

978" SCREEN

DIMENSION

3316" TOTAL

UNIT DEPTH

(2)

INTO ROUGH OPENING

MOUNT BACK BOX

TIGHT TO THE FINISHED

WALL SURFACE

19"

GLASS

DIMENSION

A

151516" SCREEN

DIMENSION 16"

SIGNATURE:

1314"

GLASS

DIMENSION

DATE:

ROUGH

OPENING

Hydra 19-inch High-Definition LCD

Screen Size (Diagonal): 19-inch

Format: 16:9

Brightness: 450 cd/m2

Viewing Angle: 170° Horizontal/Vertical

DO NOT SIGN UNTIL ALL REQUIRED DIMENSIONS ARE VERIFIED AND ACCEPTED.

AFTER THE DRAWINGS ARE UPDATED, A REVISED DRAWING PACKAGE WILL BE RE-SENT FOR SIGNATURE.

Response Time: 6ms

Native Resolution: 1920 x 1080

Backlight: LED

Menu Languages: English, French, Spanish

Tuner:

ATV: NTSC

Digital: ATSC/QAM

Video:

Component YPbPr (RCA plugs) X 1

S-Video Mini 4-pin DIN X 1

VGA 15-pin D-sub Male X 1

HDMI Type A X 2

USB Type A X 1

4"

75 Ohm Coaxial Antenna X 1

Composite Video, Audio L, Audio R (RCA plugs) X 1

ROUGH

DIMENSIONS ARE IN INCHES

TOLERANCES

FRACTIONAL 1/8 [3mm]

ANGULAR: BEND 1.0

TWO PLACE DECIMAL .03 [.8mm]

THREE PLACE DECIMAL .015 [.4mm]

4"

(No Internal Speakers)

Amplified Output for External Speakers: 2 X 5W

Amplified Output: Terminal Block

Constant Line Output: 3.5mm Jack X 2

Control:

RS232 9-pin DB9 Female X 1

VERIFY FUNCTIONALITY

Power:

Input: 110-240 VAC, 50-60Hz, 1.5A

Type A NEMA Plug

Requires GFCI Protected Outlet

TO SURROUND THE OUTER LIP OF GLASS THAT

SURROUNDS THE BLACK METAL HOUSING NOTING

THE MANUFACTURES DESIGNED USAGE.

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN

THIS DOCUMENT IS THE SOLE

PROPERTY OF THE MANUFACTURER.

PROHIBITED.

16"

PERMISSION OF MANUFACTURER, IS

BRING ALL A/V AND

ELECTRICAL CONNECTIONS

UP INTO THE BOTTOM OF

THE BACK BOX'S OPENING

FROM INSIDE THE WALL

CAVITY PRIOR TO

INSTALLING LCD UNIT.

Date Created

15 MAR 2011

SIGNATURE

AND DATE

Revised Date

6 JAN 2012

A MOUNTING LOCATION

SHOWING SUPPLIED HARDWARE

INSERT THE LCD ASSEMBLY INTO THE

BACK BOX MOUNTING THAT HAS BEEN

ALREADY INSTALLED. SLOWLY COMPRESS

DIMENSIONS ARE IN INCHES

PROPRIETARY AND CONFIDENTIAL

IS TIGHT AGAINST THE WALL SURFACE.

FRACTIONAL 1/8 [3mm]

ANGULAR: MACH 1.0

ANGULAR: BEND 1.0

THREE PLACE DECIMAL .015 [.4mm]

THIS DOCUMENT IS THE SOLE

ENTIRE PERIMETER OF THE GLASS FACE.

A WHOLE, WITHOUT THE WRITTEN

PROHIBITED.

SECTION A-A

PULL OUT EXTRA LENGTH OF EACH OF THE A/V

AND POWER CABLES, ATTACH THEM AND TEST THE

UNIT FOR FULL FUNCTIONALITY PRIOR TO ADDING

SEALANT TO THE BACK OF THE GLASS

Item

S-R-1913-19.5-HY.5

Sales Order / Inv. Number Date Created

15 MAR 2011

Revised Date

6 JAN 2012

SEALANT AFTER

UNIT IS ENGAGED

DIMENSIONS ARE IN INCHES

TOLERANCES

FRACTIONAL 1/8 [3mm]

ANGULAR: MACH 1.0

TWO PLACE DECIMAL .03 [.8mm]

THREE PLACE DECIMAL .015 [.4mm]

THE INFORMATION CONTAINED IN

THIS DOCUMENT IS THE SOLE

PROPERTY OF THE MANUFACTURER.

ANY REPRODUCTION IN PART, OR AS

PERMISSION OF MANUFACTURER, IS

PROHIBITED.

SHEET

3

TV Assembly YPbPr

Adaper

Composite

Adapter

RS-232

Adapter w a t e r p r o o f

Waterproof

IR Remote

Control

Manual and Custom

Drawing Package

Input/Output Overview (Bottom View)

19" TV Shown

Speaker Out

RF Coaxial

Antenna

RS232

Input

Audio

S-Video

Line

Out

Composite

YPbPr

VGA

Input

HDMI 2

Input

PC

Audio In

HDMI 1

Input

IR Input

Audio Line

Out

IR Output

USB

Power Adapter

Input

Remote Functions

Power On / Off

“Mute” turns on or off all audio output

“Sleep” designates power off after a specified time

“Zoom” configures ratio and appearance of picture

“Input” designates displaying content source

“Display” displays input and resolution information

Numerical selection for channels and settings

BOTTOM VIEW guide cc last mute sleep ok zoom input display menu exit channel enter volume

Mounting

Hardware

TV Assembly

TV Back Box

Glass Face

2010 Remote Redesign

Final

“Guide” displays available EPG (Electronic

Program Guide) when using tuner input

“CC” turns on/off subtitles

“Last” recalls last channel viewed

Menu Controls

Press “Menu” to launch On Screen Display menu

Use arrows and “Ok” to navigate menu and make selections

Press “exit” to close the On Screen Display menu

Use Channel arrows to increase or decrease channel selection

Use Volume arrows to increase or decrease volume level w a t e r p r o o f

7

Installation

NOTE:

All Séura drawing packages indicate generalized nominal residential wood framing construction, and are not indicative of any particular building code.

It is the installers responsibility that all electrical, audio/visual, and framing construction are code compliant to the municipality in which the product is being installed. Modifications made to Séura recommendations are at the sole discretion of the installer and release Séura of all liability.

Inspect the desired location for installation and be aware of all electrical wiring pathways, water pipes, gas lines, or other potentially hazardous conditions that may exist to protect from accidental damage during creation of on-site conditions.

Ensure all required electrical specifications are adhered to and have been installed by the appropriate individuals and are code approved.

Scan to watch the 2-minute installation video

Ensure all framing requirements, if needed have been completed to building code and pose no structural issues.

It is REQUIRED that this product is plugged into an electrical outlet protected by a Ground Fault Circuit Interrupter (GFCI) to protect against electric shock, fire, and/or injury. Failure to do so will void any warranty for this product.

Only qualified individuals should attempt to service the product. Removing covers can expose you to high voltage and other dangerous conditions.

VERTICAL FRAMING MEMBERS

BACK BOX

Read all installation instructions before beginning installation.

Step 1

Install back box to framing members using the provided four screws and washers through screw-mounting slots in back box. Ensure that the front of the box is flush with finished wall and mounting tabs will rest on finished wall surface. Feed power and other desired cords through pass-through port.

PASS-

THROUGH

PORT

Note: Do not overtighten mounting hardware. Back box should fit snuggly between framing members. If the fit is poor, and overtightening occurs, the back box may deform, resulting in a poorly sealed installation. If the back box doesn’t fit well between framing members, shim the framing members for a square and stable fit.

LOW-

VOLTAGE

POWER

SCREW

INTO

FRAMING

MEMBERS

USING

SCREW-

MOUNTING

SLOTS (4)

VIDEO

AUDIO

8

Step 2

While keeping cord ends outside the back box pass-through port, finish the wall tight to the edges of back box, removing any gap. Once complete, the final wall surface should be flush with the front edge of the back box as shown.

WALL BOARD

FRAMING

MEMBER

SCREW

MOUNTING

SLOTS

FINISHED

WALL

BACK BOX

Installation

Scan to watch the 2-minute installation video

FINISHED WALL

BACK BOX

MAINTAIN CORDS IN

PASS-THROUGH PORT

DURING WALL FINISHING

9

10

Installation

Step 3

Install TV Assembly:

A) Place TV assembly face down on a clean, dry surface near the installed back box. Make all necessary connections and ensure LCD operation is successful.

B) Before applying adhesive, “dry fit” the TV assembly in back box. Notice that the gravity lock mounts engage. Ensure functionality in installed position.

C) Remove TV assembly from back box. Do not disconnect any wires. Clean any residue from glass and remove debris.

D) Generously apply 1/8" bead of supplied waterproof sealant to glass face as close to the edge as possible. Affix to wall surface, ensuring gravity lock mounts are fully engaged. Sealant should seep out the front on all edges to provide the best seal.

E) Immediately after TV assembly is installed and sealed, again verify functionality of LCD and remote. If operation has been compromised by the installation, corrections can easily be made before the sealant has cured.

F) Wipe dripping or excessive sealant.

Scan to watch the 2-minute installation video

1/8" BEAD

SEALANT

Installation

Step 4

Allow waterproof sealant 24 hours to cure at 72 degrees Fahrenheit before exposing to moisture. (or recommended time designated by sealant instructions)

Once fully cured, use a razor blade or utility knife to carefully remove excess sealant.

FINISHED WALL

FRAMING

MEMBER

COMPLETELY

INSTALLED

BACK BOX AND

TV ASSEMBLY

2) BACK BOX

LOW VOLTAGE

POWER CABLE

1) TV ASSEMBLY

PASS-

THROUGH

PORT

Scan to watch the 2-minute installation video

SEALANT

CREATES

WATER-

TIGHT

SEAL

NOTE:

GLASS

FACE-

PLATE

SEALS

DIRECTLY

TO

FINISHED

WALL

SURFACE

11

Making Connections

Connecting Video

The Television features one Component, one Composite, one VGA, and two HDMI inputs. We recommend using the HDMI inputs for best video and sound quality.

Connecting Audio

Two passive loudspeakers can be connected to the speaker output socket with speaker cables. Observe the polarity (+ and -) of the connections to avoid phase errors (= incorrect stereo playback).

Euroblock Connector

-

L

+

-

R +

Note: Hydra is not equipped with built-in speakers.

-

L

+

-

R

+

Speaker

Wire Input

Connecting a USB Media Source

Connect an external USB media source to the USB socket to display photos, play music or install a software update.

In order to have access to the USB port after installation we recommend installing a

USB extension cable.

Connecting a Home Automation System

With the RS-232 interface (9 pin d-subminiature connector female) you can connect a serial cable for communication with a home automation system, PC, etc. The baud rate is 115200.

Connecting an external IR-transmitter and Receiver

With the IR input interface, you can connect an external IR receiver to the Séura

Television. With the (4) IR output terminals, you can loop through the IR signal from the remote control to an external device with a corresponding IR input or via an IR emitter diode affixed in front of the IR receiver eye.

12

2010 Remote Redesign

Final mute sleep zoom input mute sleep guide cc last

2010 Remote Redesign

Final

Final

2010 Remote Redesign

Final

2010 Remote Redesign

Final

2010 Remote Redesign

Final

2010 Remote Redesign

Final

2010 Remote Redesign

Final

On Screen Display Menu (OSD)

Final mute guide

2010 Remote Redesign

Final last guide cc

In the on screen display menu (OSD) you can adapt the characteristics of your display based on personal preferences. zoom

OSD menus include last last

Video, Audio, TV, Setup, and Parental.

guide cc last exit sleep mute mute

1. Press on your remote control to open the OSD menu.

ok

2010 Remote Redesign

Final cc ok last mute mute

2. Navigate within the OSD with mute ok last zoom ok zoom sleep sleep ok ok sleep ok zoom mute zoom zoom zoom menu exit input

2010 Remote Redesign

Final menu exit

2010 Remote Redesign

Final

5. Confirm selection with display menu exit enter mute input guide zoom cc ok menu exit menu

2010 Remote Redesign

Final display channel menu channel exit channel channel sleep guide input cc display last menu channel exit

2010 Remote Redesign channel volume cc last enter guide guide mute zoom cc cc sleep input last ok menu enter volume enter volume volume enter enter enter mute zoom guide cc last volume enter volume zoom input input ok zoom mute sleep w a t e r p r o o f ok display menu exit w a t e r p r o o f

5. Press to close the Input Source list without selecting an alternative source.

input input display display menu menu exit exit channel volume channel zoom w a t e r p r o o f channel display menu exit w a t e r p r o o f w a t e r p r o o f input volume channel channel menu exit w a t e r p r o o f enter volume channel enter volume enter volume

The Video Settings menu offers options to enhance and refine the image enter w a t e r p r o o f

Contrast

Saturation

Hue

Sharpness

w a t e r p r o o f

Back Light

Advanced Video

Reset Picture Mode

PICTURE MODE

Within the Picture Mode menu you can customize the image display according to your preferences.

Your options:

Home, Vivid, User, Cinema, Sport

The Home setting is recommended for most viewing environments. Select the User Mode to adjust your preferred settings manually.

13

OSD (cont.)

Advanced Video Settings

The Advanced Video Settings menu offers further options to refine the image characteristics of your Séura Television.

Adjustment options include:

DNR

MPEG NR

Adaptive Luma Control

Flesh Tone

DI Film Mode

Blue Stretch

Game Mode

Blue Mute

Gamma

Color Temperature

COLOR TEMPERATURE

Within the Color Temperature menu you can customize the Color

Temperature of the picture according to your preferences.

Your options:

Standard, Warm, User, Cool

Audio Settings

The Audio Settings menu offers options to enhance and refine the sound characteristics of your Séura Television based on personal preferences.

Adjustment options include:

Balance

Bass

Treble

Sound Surround

Sound Mode

MTS

Audio Language

SPDIF Type

14

OSD (cont.)

TV Settings

The TV Settings menu offers options to set up and adjust preferences using the built-in television tuner.

Adjustment options include:

Tuner Mode

Channel Scan

Channel Skip

TUNER MODE

Select the option for obtaining television programming:

Cable, Antenna

CHANNEL SCAN

Select Channel Scan to begin automatic scanning of channels. This process takes a few minutes and depends on program availability.

CHANNEL SKIP

Designate preferences for skipping channels.

Setup Menu

The Setup Menu offers options to determine fundamental settings of your

Séura Television based on personal preferences.

Adjustment options include:

OSD Language

Caption

Time Setup

Reset Default

TIME SETUP

Options within the Time Setup selection include

Time Zone, Time, and

Sleep Timer.

2010 Remote Redesign

Final

TIME ZONE

The local time zone may be selected using the graphical map of North

America

SLEEP TIMER

Within the Sleep Timer menu you can determine a timespan after which the Séura Television will turn off automatically.

mute

Your options:

Off, 10, 20, 30, 40, 50, 60, 90, 120 minutes

sleep

The Sleep Timer can also be activated and deactivated directly with ok the remote control.

zoom input display menu exit channel enter volume w a t e r p r o o f

15

OSD (cont.)

Parental Menu

The Parental Menu offers options to restrict program viewing based on various national rating systems.

To access the menu, enter the 4-digit Password using the keypad on the remote. The factory default password is “0000”.

Adjustment options include:

Program Block

Change Password

Clean All (or reset settings)

16

RS-232 Control

Settings Table

Current Models: 19.5 Hydra, 27.5 Hydra, 10.5 TV Mirror, 19.5 TV Mirror, 27.5 TV Mirror

Legacy Model: 10.3 TV Mirror, 19.4 Hydra, 10.4 TV Mirror, 19.4 TV Mirror

Baud Rate 115200 bps

Data Length

Parity Bit

Stop Bit

Flow Control

8 bits

None

1 bit

None

Command Table

1 2

Power

R

R

P

P

S

S

O

O

Input

I

I

I

I

I

I

I

I

I

A

A

A

A

A

T

T

A

A

Volume

V O

Zoom

W

W

W

W

W

W

W

W

W

I

I

I

I

I

I

I

I

I

Mute

M

M

U

U

Sleep Timer

O

O

O

O

O

F

F

F

F

F

Channel

D

D

C

C

A

C

H

H

3

D

D

D

D

D

D

D

D

D

V

V

V

V

V

G

V

V

V

2

2

U

D

T

T

T

T

T

P

P

W

W

T

T

L

4

P

U

P

W

M

M

M

M

M

W

W

R

R

E

E

M

D

D

D

D

D

D

D

D

D

5

6

7

4

5

8

9

1

2

3

E

E

E

E

E

E

E

E

E

3

4

5

1

2

X

0

6

7

X

X

2

3

0

1

4

0

1

0

1

1

2

6 7 8

Power Off (sends TV into Standby)

Power On obsolete obsolete toggle the input source set the input source to TV, channel is set to the last channel tuned sets the input source to AV (composite video) sets the input source to S-Video sets the input source to Component Video sets the input source to VGA (PC Input) sets the input source to HDMI 1 sets the input source to HDMI 2 sets the input source to USB sets the volume level

*shaded characters may be any number from 0 to 99 toggles the view mode sets the view mode to side bar (AV input with 4:3 signal) sets the view mode to zoom (AV input with 4:3 signal) sets the view mode to stretch (AV input with 4:3 signal) sets the view mode to normal (PC input) sets the view mode to zoom (PC input) sets the view mode to stretch (PC input) sets the view mode to dot-by-dot sets the view mode to full screen mutes the audio turns off mute disables the sleep timer

TV turns off in 30 minutes

TV turns off in 60 minutes

TV turns off in 90 minutes

TV turns off in 120 minutes sets ATSC tuner to a specific over the air channel, XX-YY or XX.YY is entered as XXYY sets cable tuner to a channel channel up channel down

17

IR Commands

Remote Hexadecimal Codes

Power Toggle

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 0047 000A 0047 000A 001F 000A 0047 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 0718 000A 0047 000A 001F 000A 001F

000A 001F 000A 001F 000A 0047 000A 001F 000A 001F 000A 0047 000A 001F

000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 06A0

Menu

0000 006B 0000 0020 000A 0048 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F

000A 001F 000A 0047 000A 001F 000A 0768 000A 0048 000A 001F 000A 001F

000A 001F 000A 001F 000A 0048 000A 0048 000A 0048 000A 0048 000A 0048

000A 001F 000A 0048 000A 0048 000A 001F 000A 0048 000A 0654

Source

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 0047

000A 001F 000A 0047 000A 001F 000A 06C8 000A 0047 000A 001F 000A

001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 001F 000A 001F

000A 0047 000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 06F2

Display

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 0047 000A 0047 000A 001F 000A 0047 000A 0047 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 06D4 000A 0047 000A 001F 000A

001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A

001F 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 06C7

Exit

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 0047 000A 0047 000A 001F 000A 001F 000A 0047 000A 0047 000A 0047

000A 0047 000A 0047 000A 001F 000A 0685 000A 0047 000A 001F 000A 001F

000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 001F

000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 071A

Up

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 001F 000A 0047

000A 001F 000A 0047 000A 001F 000A 06C8 000A 0047 000A 001F 000A

001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047

000A 001F 000A 0047 000A 001F 000A 0047 000A 001F 000A 0047 000A 06F6

Down

0000 006B 0000 0020 000A 0048 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 001F 000A 001F 000A 0047 000A 0048 000A 001F 000A 0048

000A 001F 000A 0048 000A 001F 000A 0718 000A 0047 000A 001F 000A 001F

000A 001F 000A 001F 000A 0047 000A 0047 000A 0047 000A 001F 000A 001F

000A 0048 000A 001F 000A 0047 000A 001F 000A 0047 000A 06A4

Left

0000 006B 0000 0020 000A 0048 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 001F 000A 001F 000A 0047 000A 0048 000A 001F 000A 0048

000A 001F 000A 0048 000A 001F 000A 0718 000A 0047 000A 001F 000A 001F

000A 001F 000A 001F 000A 0047 000A 0047 000A 0047 000A 001F 000A 001F

000A 0048 000A 001F 000A 0047 000A 001F 000A 0047 000A 06A4

Right

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 0047 000A 0047 000A 001F 000A 0047 000A 0047 000A 0047

000A 0047 000A 0047 000A 001F 000A 06A0 000A 0047 000A 001F 000A

001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 001F 000A 0047 000A

001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 071B

Enter

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 0047 000A 0048 000A 0047 000A 001F 000A 0048 000A 0048 000A 0047

000A 0048 000A 0048 000A 001F 000A 0678 000A 0048 000A 001F 000A 001F

000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0048 000A 001F

000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 074E

Sleep

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 0047 000A 0047 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 06FC 000A 0047 000A 001F 000A

001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 001F 000A

001F 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 059B

Zoom

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F

000A 0048 000A 0048 000A 001F 000A 0740 000A 0048 000A 001F 000A 001F

000A 001F 000A 001F 000A 0048 000A 0048 000A 0047 000A 0048 000A 0047

000A 001F 000A 0048 000A 001F 000A 001F 000A 0047 000A 068B

EPG

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 0047 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 001F

000A 001F 000A 0047 000A 001F 000A 06C8 000A 0047 000A 001F 000A

001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A

0047 000A 001F 000A 0047 000A 0047 000A 001F 000A 0047 000A 06EE

Mute

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 06D4 000A 0047 000A 001F 000A

001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A

001F 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 06C9

ch+

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 0047 000A 001F 000A 001F 000A 001F 000A 0048 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 0740 000A 0047 000A 001F 000A 001F

000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 0047 000A 001F

000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 067E

ch-

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 001F 000A 0048 000A 001F 000A 001F

000A 001F 000A 0048 000A 001F 000A 0740 000A 0047 000A 001F 000A 001F

000A 001F 000A 001F 000A 0048 000A 001F 000A 0048 000A 0048 000A 001F

000A 0047 000A 0048 000A 0048 000A 001F 000A 0047 000A 0683

vol+

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 0740 000A 0047 000A 001F 000A 001F

000A 001F 000A 001F 000A 0047 000A 0047 000A 001F 000A 0047 000A 001F

000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 067C

vol-

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 0047 000A 001F 000A 0047 000A 001F 000A 0047 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 0718 000A 0047 000A 001F 000A 001F

000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 001F

000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 06A8

1

0000 006C 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 074A 000A 0047 000A 001F 000A

001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 0047

000A 0047 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 0652

2

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 0768 000A 0047 000A 001F 000A 001F

000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 0047 000A 0047

000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 0651

3

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 0047 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 0723 000A 0047 000A 001F 000A 001F

000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 0047

000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 067D

4

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 001F 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 0768 000A 0047 000A 001F 000A 001F

000A 001F 000A 001F 000A 0047 000A 0047 000A 001F 000A 0047 000A 0047

000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 054F

5

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 0047 000A 001F 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 0740 000A 0047 000A 001F 000A 001F

000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 0047

000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 067E

6

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 0047 000A 0047 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 0718 000A 0047 000A 001F 000A 001F

000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047

000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 06A7

7

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 0047 000A 0047 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 0718 000A 0047 000A 001F 000A 001F

000A 001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 0047

000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 06A6

8

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 001F 000A 001F 000A 0047 000A 001F 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 0768 000A 0047 000A 001F 000A 001F

000A 001F 000A 001F 000A 0047 000A 0048 000A 0047 000A 001F 000A 0047

000A 0047 000A 0048 000A 0047 000A 001F 000A 0048 000A 065B

9

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 0047 000A 001F 000A 001F 000A 0047 000A 001F 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 0740 000A 0047 000A 001F 000A 001F

000A 001F 000A 001F 000A 001F 000A 0047 000A 0047 000A 001F 000A 0047

000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 067E

0

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 0047 000A 001F 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 0740 000A 0047 000A 001F 000A 001F

000A 001F 000A 001F 000A 0047 000A 001F 000A 0047 000A 001F 000A 0047

000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 0678

. (Dot)

0000 006C 0000 0020 000A 0046 000A 001E 000B 001E 000A 001E 000B

0047 000A 001E 000B 0046 000A 001E 000B 0046 000A 0046 000A 0046

000B 001E 000A 001E 000B 0046 000B 001D 000B 06A5 000B 0046 000B

001E 000A 001E 000A 001E 000A 0046 000B 0046 000A 001E 000B 0046

000A 001F 000A 001E 000A 001E 000A 0046 000A 0046 000A 001E 000A

0045 000A 0696

Enter

0000 006B 0000 0020 000A 0047 000A 001F 000A 001F 000A 001F 000A 001F

000A 0047 000A 0047 000A 001F 000A 0047 000A 001F 000A 001F 000A 001F

000A 001F 000A 0047 000A 001F 000A 06FC 000A 0047 000A 001F 000A

001F 000A 001F 000A 001F 000A 001F 000A 001F 000A 0047 000A 001F

000A 0047 000A 0047 000A 0047 000A 0047 000A 001F 000A 0047 000A 06A1

Discrete Remote Hexadecimal Codes

Power On(only)

0000 006d 0000 0020 000a 0047 000a 001e 000a 001e 000a 001e 000a 0047

000a 001e 000a 0047 000a 001e 000a 0047 000a 001e 000a 001e 000a 0047

000a 001e 000a 0047 000a 001e 000a 068b 000a 0047 000a 001e 000a 001e

000a 001e 000a 0047 000a 0047 000a 001e 000a 0047 000a 001e 000a 0047

000a 0047 000a 001e 000a 0047 000a 001e 000a 0047 000a 068b

Power Off(only)

0000 006d 0000 0020 000a 0047 000a 001e 000a 001e 000a 001e 000a 0047

000a 0047 000a 0047 000a 001e 000a 0047 000a 001e 000a 001e 000a 0047

000a 001e 000a 0047 000a 001e 000a 068b 000a 0047 000a 001e 000a 001e

000a 001e 000a 0047 000a 001e 000a 001e 000a 0047 000a 001e 000a 0047

000a 0047 000a 001e 000a 0047 000a 001e 000a 0047 000a 068b

AV (INPUT 1)

0000 006d 0000 0020 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e

000a 001e 000a 0047 000a 001e 000a 001e 000a 0047 000a 0047 000a 001e

000a 001e 000a 0047 000a 001e 000a 068b 000a 0047 000a 001e 000a 001e

000a 001e 000a 001e 000a 0047 000a 001e 000a 0047 000a 0047 000a 001e

000a 001e 000a 0047 000a 0047 000a 001e 000a 0047 000a 068b

S-VIDEO (INPUT 2)

0000 006d 0000 0020 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e

000a 0047 000a 0047 000a 001e 000a 001e 000a 0047 000a 0047 000a 001e

000a 001e 000a 0047 000a 001e 000a 068b 000a 0047 000a 001e 000a 001e

000a 001e 000a 001e 000a 001e 000a 001e 000a 0047 000a 0047 000a 001e

000a 001e 000a 0047 000a 0047 000a 001e 000a 0047 000a 068b

COMPONENT (INPUT 3)

0000 006d 0000 0020 000a 001e 000a 0047 000a 0047 000a 0047 000a 0047

000a 0047 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e 000a 001e

000a 0047 000a 0047 000a 001e 000a 068b 000a 001e 000a 0047 000a 0047

000a 0047 000a 0047 000a 001e 000a 001e 000a 0047 000a 0047 000a 0047

000a 0047 000a 0047 000a 001e 000a 001e 000a 0047 000a 068b

VGA (INPUT 4)

0000 006d 0000 0020 000a 001e 000a 0047 000a 0047 000a 0047 000a 0047

000a 0047 000a 001e 000a 001e 000a 001e 000a 001e 000a 001e 000a 001e

000a 0047 000a 0047 000a 001e 000a 068b 000a 001e 000a 0047 000a 0047

000a 0047 000a 0047 000a 001e 000a 0047 000a 0047 000a 0047 000a 0047

000a 0047 000a 0047 000a 001e 000a 001e 000a 0047 000a 068b

HDMI (INPUT 5)

0000 006d 0000 0020 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e

000a 0047 000a 0047 000a 001e 000a 001e 000a 0047 000a 001e 000a 0047

000a 0047 000a 0047 000a 001e 000a 068b 000a 0047 000a 001e 000a 001e

000a 001e 000a 001e 000a 001e 000a 001e 000a 0047 000a 0047 000a 001e

000a 0047 000a 001e 000a 001e 000a 001e 000a 0047 000a 068b

HDMI 2

0000 006d 0000 0020 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e

000a 0047 000a 001e 000a 0047 000a 0047 000a 001e 000a 001e 000a 0047

000a 0047 000a 0047 000a 001e 000a 068b 000a 0047 000a 001e 000a 001e

000a 001e 000a 001e 000a 001e 000a 0047 000a 001e 000a 001e 000a 0047

000a 0047 000a 001e 000a 001e 000a 001e 000a 0047 000a 068b

ANT

0000 006d 0000 0020 000a 0047 000a 001e 000a 001e 000a 001e 000a 001e

000a 0047 000a 001e 000a 001e 000a 0047 000a 001e 000a 0047 000a 001e

000a 0047 000a 0047 000a 001e 000a 068b 000a 0047 000a 001e 000a 001e

000a 001e 000a 001e 000a 001e 000a 0047 000a 0047 000a 001e 000a 0047

000a 001e 000a 0047 000a 001e 000a 001e 000a 0047 000a 068b

Download these codes at http://www.seura.com/download-center

18

Troubleshooting

If the product is not working properly, please check the following troubleshooting hints before you contact customer service:

Symptoms

Blank screen

Possible Solution

Check the status LED. If the status LED is red, the Television is in standby and the monitor is black, this is normal. If the status LED is green and the monitor is black, the Television might perform an input scan with no available signal. Please check if an input source is available and that the port of the device has been connected correctly in the Service Settings/

Input Ports menu. Press “Menu” on your remote control: you should see the OSD menu. Check your settings for misconfigurations and adjust accordingly. Alternatively, perform a factory reset to restore the Television to its default settings. If the problem still exists contact customer service.

Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged.

Color defects

The image is unsatisfactory

Error message:

“No Signal”

Low or no sound

Remote control doesn’t work

Adjust the picture characteristics as described in the above-mentioned section “Video Settings”. Image is not stable

Check that the display resolution and frequency from your media source is compatible with the Television.

Check that the connected media sources are switched on. Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Press “Menu” on your remote control: you should see the OSD menu. Check your settings for misconfigurations and adjust accordingly. Alternatively, perform a factory reset to restore the Television to its default settings. If the problem still exists contact customer service.

Press “Volume Up” and/or “Volume Down” on your remote control and check the audio connection cable(s). Make sure that the Volume Limit setting in the Service Settings menu has been set to an audible value.

Press a button on the remote control and check that the status LED of the Television flashes briefly. If it doesn´t, replace the batteries of the remote control.

NOTE: If the above troubleshooting hints do not help you to find a solution, please contact Séura.

Technical Features

Features

Display Backlight

Active Screen Area W x H

Diagonal

Picture Format

Physical Resolution

Viewing Angle

Brightness

Contrast

Response Time

Power Consumption

Operating Temperature

Humidity

Certification

19"

TFT Thin Film Transistor | LED Backlight

21.54" x 18.23"

19"

16:10

1440 x 900

Horizontal

Typical (Total) 178°

(Left: 89° / Right: 89°)

Vertical

Typical (Total) 178°

(Up: 89° / Down: 89°)

450 cd/m2

Typical 4000:1

6.5ms

DC 19V

40W / .333A

32° to 122° Fahrenheit

20 - 80% RH, Non-Condensing

CE, FCC

NOTE: Above specification may be changed without prior notification for quality improvement.

26.73" x 22.64"

27.2"

16:9

1920 x 1080

Horizontal

Typical (Total) 176°

(Left: 88° / Right: 88°)

Vertical

Typical (Total) 176°

(Up: 88° / Down: 88°)

450 cd/m2

Typical 5000:1

6ms

DC 19V

50W / .417A

27"

19

Ports and Media Support

Ports

Input Ports

Output Ports

Video

LINE Audio INPUT

Component Input

HDMI

Input

USB

RS232

IR Input (Infrared)

S-Video

PC Audio In

Speaker Output

IR Output

Audio Line Out

HDMI

Component (YPbPr / YCbCr)

1 x mini jack and adapter cable: RCA terminal, white, red, yellow

1 x mini jack and adapter cable: RCA terminal, red, green, blue

2 x HDMI

terminal

1 x USB terminal

1 x mini jack and adapter cable: D-SUB 9pin female

1 x mini jack 3.5mm

1 x 4-pin mini DIN

1 x mini jack 3.5mm

1 x Phoenix clip 4pin

4 x mini jack 3.5mm

2 x mini jack 3.5mm

480i, 480p, 576i, 576p, 720p, 1080i, 1080p

480i, 480p, 576i, 576p, 720p, 1080i, 1080p

Special Features

Multimedia Player

Software Update

Signal Scan

RS-232

Noise Reduction

USB

USB

Yes

Yes

3D

USB Media Support

USB Media Support

Movie

Music

Photo

File Extension

.avi

.mpg

.dat

.mov / .mkv

.mp3

.wma

.m4a / .aac

.jpg / .jpeg

.bmp

.png

Video

DivX, XviD, MPEG-4

MPEG-1, MPEG-2

--

--

MPEG-1

H.264

--

Progressive JPG

Baseline JPEG

BMP

Non-Interlaced

Interlaced

NOTE: Above specification may be changed without prior notification for quality improvement.

20

Audio

MP3, WMA, AAC

MP3

WMA

AAC

Product Limited Warranty

If a Séura, Inc. (“Séura”) product (the “Product”) fails to work or operate properly because of a defect in materials or workmanship, Séura will, for the length of the period indicated below (starting on the date of the Product’s purchase receipt for the Product), at its option, either (a) repair the Product with new or refurbished parts, including

Séura’s labor if applicable; or (b) replace the Product with a new or refurbished product. The decision to repair or replace the Product shall be in Séura’s sole discretion.

Séura warrants Lighted Mirrors with respect to Séura’s Labor for three (3) years; Mirror, Glass, Structure, Frame, and Assembly for three (3) years; Electrical for three (3) years. Lamps are not warranted.

Séura warrants TV Mirrors with respect to Séura’s Labor for three (3) years; Mirror, Glass, Structure, Frame, and Assembly for three (3) years; TV including remote and power supply for one (1) year.

Séura warrants

Lighted Mirror TVs with respect to Séura’s Labor for three (3) years; Mirror, Glass, Structure, Frame, and Assembly for three (3) years; TV including remote and power supply for one (1) year; Electrical excluding TV for three (3) years. Lamps are not warranted.

Séura warrants Hydra Waterproof TVs with respect to Séura’s Labor for three (3) years; Mirror, Glass, Structure, Frame, and Assembly for three (3) years; TV including remote and power supply for one (1) year.

Séura warrants Storm Outdoor TVs with respect to Séura’s Labor for two (2) years; Glass, Structure, Frame, and Assembly for two (2) years; TV including remote and power supply for one (1) year.

This Limited Warranty extends only to the original purchaser of a Product and only covers a Product purchased new. Séura reserves the right to require any warranty claimant to produce the original purchase receipt or other original purchase date proof as may be reasonably required by Séura to verify the Product’s warranty eligibility.

1. Exceptions to Warranty: Séura does not warrant the Products against defects arising out of, related to, or caused by, whether totally or partially, and whether directly or indirectly, any of the following:

A. Cleaning and maintenance of, or failing to properly clean and maintain, any Product, part or component of a Product, including, but not limited to, filters, front bezel, and other Product areas or components;

B. A Product’s extended use, including particularly, commercial applications, where a Product is operating on average more than six (6) hours per day on a permanent or extended periodic basis;

C. Circumstances, damage (including concealed damage) or other conditions occurring during shipment of a Product or at any time after a Product leaves

Séura’s facility;

D. Circumstances, damage or other conditions occurring during unpacking and/or removal of a Product from its original packaging, including the removal of protective material;

E. Circumstances, damage or other conditions occurring during transport of the Product to or from Séura before or after authorized service. Products must be packed properly using original packaging or Séura replacement or pre-authorized packaging. Customer assumes all risk, while in transit to or from Séura, and shall be responsible for any costs incurred in transporting the Product.

F. Improper, incorrect, or insufficient AC supply voltage to a Product;

G. Alterations, modifications or changes to a Product without Séura’s prior written authorization;

H. The incorporation of a Product into or within a product of a third party, without Séura’s prior written authorization;

I. A Product’s misuse, neglect use, abuse, or improper operation, including the failure to follow a Product’s normal and ordinary operating instructions;

J. The effects of fire, flood, lightning, electrical surges, water and other liquid infiltration, smoke, and other substances not intended to come into contact with a

Product, including any such substances contact with a Product as the result of acts of God;

K. The improper or faulty installation, setup, or adjustment of a Product;

L. A Product’s repair, attempted repair, or total or partial disassembly by any party other than a Séura authorized service representative;

M. When the product occurs with pixel errors within the specified and permitted area. For more information about this, inquire directly with Seura regarding the

Seura Pixel Policy.

N. Corrosion that does not affect the performance of a Product or the reasonable cosmetic appearance of a Product; and

O. Scratches or other paint or finish damage to a Product that lead to or are caused by, in part or in total, corrosion.

2. Warranty Disqualifiers. This Limited Warranty does not apply, and Séura makes no warranties or representations, with respect to any Product being free from defects in materials or workmanship if the Product was purchased from a seller who is not authorized, by Séura, to sell Séura products, is owned by or is in possession of an individual or entity who is not the original purchaser of the Product, or if the Product’s original Séura serial number has been removed, defaced, replaced, or otherwise tampered with in any manner.

3.

Limitation of Liability. THE SPECIFIC TERMS OF THIS LIMITED WARRANTY ARE IN LIEU OF ALL OTHER WARRANTIES, ORAL, EXPRESSED OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR USE. SÉURA WILL NOT BE LIABLE FOR ANY LOSS,

DAMAGE OR LIABILITY OR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OR MISUSE OF A PRODUCT, OR ARISING

OUT OF ANY BREACH, BY THE PURCHASER OF A PRODUCT, OF THIS LIMITED WARRANTY. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF

INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON HOW LONG AN IMPLIED LIMITED WARRANTY LASTS, SO THE EXCLUSIONS MAY NOT APPLY TO

A PARTICULAR PURCHASER. NOTWITHSTANDING ANYTHING CONTAINED IN THIS LIMITED WARRANTY TO THE CONTRARY, SÉURA’S MAXIMUM LIABILITY TO A

PURCHASER RELATED TO ANY WARRANTY CLAIM OR ALLEGATION OF A DEFECT WITH RESPECT TO A PRODUCT SHALL NOT EXCEED THE THEN CURRENT SÉURA

WHOLESALE PRICE OF THE SPECIFIC PRODUCT FROM WHICH THE WARRANTY CLAIM DERIVES.

NOTICE OF ANY WARRANTY CLAIM MUST BE RECEIVED BY SÉURA, IN WRITING, PRIOR TO THE EXPIRATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH

ABOVE. THE PRODUCT WARRANTY APPLIES ONLY FOR THE PERIODS SET FORTH ABOVE.

4. Warranty Procedure. Prior to returning any Product to Séura, a warranty claimant must contact Séura at 920- 857-9069 to obtain a return goods authorization

(RGA) number and, if applicable, specific return and shipping instructions. A Product will only be accepted for warranty claims if returned and shipped to

Séura in the Product’s original packaging materials. If original packaging is not available, please contact Séura to receive authorized replacement packaging.

Packages not bearing the issued returned goods authorization (RGA) number will not be accepted by Séura and will be returned to sender. In addition to the Product, the package must include the warranty claimant’s original sales receipt for the purchase of the Product. All Product returns shall be received by Séura, at 1230 Ontario Road; Green Bay, WI 54311 with freight prepaid by the warranty claimant. Séura shall not be responsible for, and the warranty claimant assumes and retains all such responsibility, any damage or loss to or of the Product during shipment to Séura as the result of a warranty claim.

21

22

Notes Notes

23

Séura, Inc.

1230 Ontario Road

Green Bay, WI 54311

800.95.SEURA

t: 920.857.9069

f: 920.857.9490

© Séura 2013

All Rights Reserved

6-10-13

8 0 0 . 9 5 7. 3 8 72 w w w.seura.com

advertisement

Related manuals