Xtrons TD713 User Manual
Add to my manuals
19 Pages
The Xtrons TD713 offers a wide range of features to keep you entertained on your journeys. Enjoy your favorite movies, music and photos with ease and flexibility, on the go. It has Bluetooth connectivity, so you can stream audio from your phone or tablet, and make and receive calls hands-free. The GPS function provides voice navigation and simple GPS navigation with automatic switching between GPS1 and GPS2 modes. With the SD/MMC and USB ports, you can connect external storage devices and play your media files directly.
advertisement
Model: TD713/TD713G
1
2
23
24
29
30
31
33
4
6
7
10
12
15
17
19
22
3
4 33
32
1 2 3
1. VOL
2. VOL
3. IR
4 5 6
4. SOURCE
5. NAVI/MUTE
6. EJECT
5
6
1 2 3 4
1. radio
2. Disc
3. USB
4. SD/MMC
5. GPS navigation
6. TV
7. AUX
5 6 7 8 9
8. Bluetooth
9. IPOD
10. normal setting
11. time display
12. night mode/off-screen
13. switch the background image
10
Theme clock display
Night mode/off-screen
Click to turn to night mode, click again to turn off the screen to the show as the next
TV.ant
31
30
T
V
D
A
M
B
R
H
S
T
M
7
8
R
S
T
H
K
M
N while and just
R
“ ”
Installation
Installation
Choose the proper fittings according to the car
Note: 1. please keep the small parts away from the children.
2. Use the attached screws.
3. The installation of attached parts may vary from the cars.
Make sure to be installed by the professional.
29
28
Remote control operations
Stop playing
Press [ ] for t he fi rst ti me t o pre-st op playing when you are playing the DVD, and the TV shows “Please press Play key to continue”. It stops playing when you press it for the second time.
Note: The playing stops when you press it for the first time in the mode of VCD, MP3, CD, or USB/SD/MMC card.
Angle
Press [ANGLE] when you are playing the DVD to watch the DVD disc in different angles.
Note: 1.There is no this function when you are playing
VCD, MP3, and CD.
2. This button only works when you are copying the
DVD with multi-angle content.
Enter/Eject
You can withdraw the disc by pressing
[Enter/Eject] if there is a disc inside the
DVD; press it again to read and play the disc.
Note: You can put the disc into the DVD from the entry directly when the entry window is open.
Title menu
When you press [TITLE] in DVD or
VCD status, the device shows all the programs of the disc. You can use the number key [0-10+] to select the
[ program directly, or press to select your desired menu and press [ENTER] or
] to play .
Note: 1. TITLE does not work when you are playing MP3 and CD.
2. You can press [TITLE] to select the title/system language when playing the DVD discs with multi-title/language.
Zoom on/Zoom out
Press [ZOOM] for the first time when you are playing the DVD or VCD, the screen will enlarge in the following rules:
2-fold, 3-fold, 4-fold, 1/2-fold, 1/3-fold,
1/4-fold, and 0-fold.
Note: ZOOM key does not work in CD/MP3 mode.
System setup
1. Press [SETUP] to enter the DVD setup menu when you are playing the DVD.
2. System setup menu is shown as follows:
System setup
Language setup
Audio setup
Video setup
Dolby digital setup
3. Press to choose the itemyou want to enter and press [ENTER] to confirm it.
A: System setup
Including TV system selection, auto play, Video output, Screen picture scale, password, Grade and Default options.
B: Language setup
Including OSD language, Audio language and Subtitle language
C: Audio setup
Including all audio setup options
D: Video setup
Including the adjustment of Video brightness, contrast, color and saturation
E: Digital audio output setup
Including the setup of digital audio output mode, dynamic range and track
Note: Language is subject to the device model.
arrow
9
10
Number key
Press number key 1-6 when you are searching the channel to choose the 6 radio channels saved in each band.
You can use the number key [0-10+] to choose a song directly in the state of
DVD, VCD, CD, and MP3. For example, if you want to choose the 15 song, you could press [10+] once and then, press [5] to play the 15 th song.
Note 1.The first time you press [10+], it is 10; it becomes
20 when you press it in the second time, and 30 in the third time, and so on.
2. The number key does not work when playing in
PBC state.
Left track/Right track/Stereo adjusting
Press [AUDIO] in succession in the state of DVD, VCD, and CD to set the mode of left/right track and stereo.
N ote:
This function can give you a satisfied sound effect when you are playing the original movie or karaoke.
For example, you can choose the Chinese dubbing or
English dubbing.
PBC play
[
You can play PBC by pressing [PBC] when you are playing the VCD 2.0. TFT screen or TV show all the programs, you can use the number key [0-10+] to select the program directly. If you want to stop to play another program, you can press
] to return to the menu to select the function again. Press [PBC] for the second time to cancel the PBC playing.
Note
:
PBC is not effective when you are playing the DVD,
You can change the Subtitle/Language to
Chinese/English by pressing [SUB-T]
Set the disc playing time
When you are playing the disc, press
[GOTO] to set the disc to play from the sett i m e, press a n d number keys to set the chapter and section or the playing time, then, press
[ENTER] to start playing.
Mode switching
You can press [MODE] to switch the playing mode among radio searching/listening/USB/SD/MMC/AU
X-IN/TV/BLUETOOTH/GPS/IPOD.
Note:
If there is no disc, SD card or USB device inside the DVD and IPOD is not selected, you cannot use this function by pressing the MODE.
GPS mode switching
The device enters the GPS mode automatically when you press [GPS] for the first time. You can operate the
GPS by touching the screen. Press
[GPS] again to switch the mode between
GPS1 and GPS2.
Note: GPS1 is voice navigation while GPS2 is simple GPS navigation. The default mode is
GPS1.
GPS picture switching
Press [SEL] to switch the picture between GPS and DVD mode.
When you are in the mode of GPS1
(Voice navigation; GPS works together with other modes), press [SEL] to switch between GPS and other modes.
When you are in the mode of GPS2
(Only GPS works), press [SEL] to switch between GPS and the main menu of the device. If you want to switch to the other mode from the GPS mode, you can press [SEL] to switch to the menu, then, click the icon to enter the corresponding mode.
27
26
Remote control operations
Band/System switching
Press [BAND/SYS] to change the radio band when you are searching the radio channel.
Press [BAND/SYS] to change to Auto,
PAL, or NTSC system mode when you are listening to the radio.
Volume +/-
Press [VOL+ or VOL-] to increase or decrease the volume of the radio.
Programming / ST
You can set the play sequence of the song by this function in the state of VCD or
CD
Press [ST/PROG] in the state of
VCD, programming P00:00 will be shown on the TFT screen or TV. You can use the
[ number keys [0-10+] to set the play sequence of the songs. You can press
] to play after the programming is complete. Press [ST/PROG] to switch between mono and stereo radio searching when you are searching the radio channel.
Playing time display
Press [OSD] to display the playing time of a song in the state of DVD, VCD, and
CD.
Equal-loudness compensation
Press [LOUD] to turn on/off the equal-loudness compensation. This function can enhance the sound effect of the woofer.
Select the station/song/Fast forward/Fast backward
Repeat/ AMS
Press [AMS/RPT] in the state of
DVD, VCD, CD, and MP3 to repeat playing the current song, and press again to cancel the repeat.
When you are searching the radio channel, press [AMS/RPT] and the device scans the channels automatically and saves them in the number keys of
[1-6].
Press to choose the channel manually backward or forward when you are searching the radio channel. If you press for more than three seconds, the radio will search the channel forward automatically.
Press in the mode of DVD,
VCD, CD, and MP3 to choose one of the songs backward or forward.
Press for three seconds to fast play backward or forward. You can find the song you want to play quickly, and press the play button to play
Random play/Local &Remote play
Press [LOC/RDM] in the state of
VCD, MP3, and CD to enter the random play, and press again to cancel. (Play according to the list)
Note: [LOC/RDM] does not work in DVD mode.
When you are searching the radio channel, you can press [LOC/RDM] to switch the mode between local searching and remote searching.
11
12
Zoom
-
Remote Control Operations
Replace the battery
If the operating distance shortens or the remote control does not work, please change a new Lithium battery. Make sure the specifications and the polarity before changing.
1. Press the battery box and draw it out in the arrow direction.
Power switch
Press to turn on/off the power supply. The remote control only works when you have pressed the [POW] on
DVD for the first time or after you have pressed the [RES] button.
TFT screen angle adjusting
Press [ ] and [ ] to slide up and down the TFT screen. It is divided into five angles, and every click can slide up/down an angle.
2. Put the button battery into the battery box with the face printed with ”+” facing up.
3.
Insert the battery box into the remote control. You will hear a “peng” sound if the battery is fitted in the right position.
Pause/Play
The DVD, VCD, CD, and MP3 pause if you press [ ], it returns to normal if you press it again.
Mute
Press 3 [ ] to eliminate the sound and press again to restore the sound.
Menu selection/confirm
You can choose the menu according to you demand by pressing and press
[ENTER] or [ ] t o confirm.
Note: it works only when you are in main menu or catalog.
25
24
1 19
Remote Control
2 3
5
4
6
20
9
12
7
13
16
10
14
27
26
MODE
BND
SYS
AMS
RPT
LOC
RDM
PBC
1
5
9
GPS
OSD
2
6
0
V
Title Sub-t
Setup ENTER
Angle
ST
PROG
SEEK-
VOL+
SEL
Slow
ZOOM
SEEK+
VIDE O
VOL-
3
7
10+
V
Audio
4
8
GOTO
LOUD
18
28
29
17
24
23
22
21
25
11
8
15
1. Power Supply
2. Play/Pause
3. Mute
4. Direction keys
5.Band/System switching button
6. Enter
7. Volume +/-
8. Select the channel/program/ Fast
9. Programming/Stereo
10. Playing time display
11. GPS screen switching
12.Repeat/Automatically save the channel
13.Random play/Local & remote control
14. Number keys
15. Audio settings
16. PBC settings
17. Catalog function
18. Desired program
19. Mode switching
20. Stop/Return
21. Angle selection
22.Title/Language settings
23. Main menu setup
24.Title/Catalog settings
25. Zoom in/Zoom out
26.GPS shortcut/mode
27.TFT screen up-sliding
28.TFT screen down-sliding
29.Compensation
equal-loudness of
Under
13
14 23
22 15
16
-
21
20 and 10 the dialed number display area shows BT NO LINK 。 appear
10
17
18
We shall be responsible for the loss of the MAP SD CARD under the condition of this label without destruction.
switch effect
19
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement