SZM SERIES MICROSCOPE User‘s Manual
Omxie Corporation
http://www.smtmax.com
Copyright
©
2010
This manual is for the Madell SZM series microscopes. To ensure the safety and to achieve
optimum performance, please read it carefully.
The performance of the microscope can't be made full use of because ofunf.1m1li:1r with the use, this
table will give some advices.
Trouble
1. Double images
2.Dilt appear in the view of
the field
3.Image is not clear
4.Image is not clear while
the focus changing.
5. The focusing knob is not
smooth
6. The image is obscure
because of the head slipping
down by itself durmg
observation
7.lncision image appear ill
the field of view or
of the video view
8.The mage on the monitor
is not clear when the
focusmg knob is turned.
Remedy
Cause
Interpupillary distance
is not correct
Diopter adjustment is not correct
Magnification of each is not the
same size
Dirt on the specimen
Dirt on the surface of eyepieces
Dirt on the surface of the
objectives
Diopter adjustment is not correct
Focus is not correct
Readjust the diopter
Readjust the focus
TI1e focusing knob is too tight
Loosen it to a suitable place
The focusing knob is too loose
Tighten it to a suitable place
Readjust it
Readjust it
Mount the same size eyepiece
Clean the specimen
Clean the surface.
Clean objectives
The draw pole is not ill correct Draw or push it to
position
the co�rect position
The focus of video is not correct
Readjust the focus of video
to a cmrect position
Diopter adjustment is not correct Aqjust the diopter
Brightness of light is not correct Adjust the brightness
Check the connection with
No power ill
the power supply
10.Bulb do not glow when
The bulb was not inserted
the switch is on
Inserting it correctly
correctly
Bulb is wrong
Replace it with a conect one
Use the wrong bulb
Replace it with a conect one
11. Bulb is burned out suddenly
Controi the voltage
The voltage is too high
Eg: use voltage regulator
Use a wrong bulb
Replace it with a correct one
12.Brightness is not enough
The voltage is too low
Increase the input voltage
The bulb will bum out soon
Replace it with a new one
13.The bulb flicker or the
The
bulb
was
not
inserted
brightness is unstable
Insert it c01rectly
correctly
9.Eye feel tire easily
">
