EDIFIER TWS NB5 Manual
Add to My manuals11 Pages
EDIFIER TWS NB5 are true wireless earbuds with active noise cancellation. They offer a comfortable fit with multiple ear tip sizes, and feature noise reduction modes for a quieter listening experience. The earbuds can be controlled by touch gestures on the earbud surface, providing direct access to volume control, call management, track switching, and noise cancellation mode selection. You can also connect to the EDIFIER CONNECT APP for additional functionality like adjusting noise cancellation levels, managing sound effects, enabling wearing detection, and customizing settings.
advertisement
▼
Scroll to page 2
of
11
TWS NB5 True Wireless Earbuds with Active Noise Cancellation Download EDIFIER CONNECT APP from the APP store/Google Play Store Product description and accessories Button on the charging case Ear tips Charging cable User manual Note: • There are different size of ear tips attached in the package, please select the suitable ones to wear. • Images are for illustrative purposes only and may differ from the actual product. Power on/off The earbuds will power on when the case is opened. The green light is lit for 1 second The earbuds will power off when the case is closed. Charge Charge the earbuds • Place the earbuds in the case and close the case for charging. Charge the charging case • Connect the case to power source with the included charging cable for charging. Charging: the three battery level indicators will be lit one by one; Fully charged: the battery level indicators will be steady lit for 10 seconds and then turn off. • • • Battery level indicator Input: 5V 5V 100mA (earbuds) 1A (charging case) Battery level indicators on the charging case • Open the case to show the case’s battery level; if three indicators are steady lit: high battery level if two indicators are lit: medium battery level if one indicator is lit: low battery level if only one indicator is lit and flashes rapidly: excessively low battery level, please charge the case in time. Warning: The rechargeable batteries that provide power for this product must be disposed properly for recycling. Do not dispose of batteries in fire to prevent an explosion. User guide Bluetooth connection • • Place the earbuds in the case, press and hold the button on the case for around 3 seconds to enter Bluetooth pairing, and the white and green lights will flash rapidly. Set mobile phone to search for and connect to "EDIFIER TWS NB5", after pairing is successful, the green light will flash slowly. Interconnection of the left and right earbuds/clear pairing records • Place the earbuds in the case, and double click the button on the case to clear pairing records and enter the TWS pairing of the left and right earbuds (the white light flashing rapidly). When successful, the earbuds will automatically enter Bluetooth pairing state, and the white and green lights will flash rapidly. User guide Functional operation Accept/end a call: double click the left or right earbud Noise cancellation mode switch: double click the left earbud Sound effect mode switch: triple click the left earbud Pause/play: double click the right earbud Next track: triple click the right earbud Note: • Noise cancellation mode switch: noise reduction mode(effective when both earbuds are used), ambient sound mode, and normal mode. • Sound effect mode switch: spatial audio mode, game mode, and standard mode. User guide Wearing detection function • • • The earbuds are removed when playing music: pause music, disable noise reduction; The earbuds are inserted when music is paused: no action; You can also set or close the wearing detection function via the EDIFIER CONNECT APP. Functions of the EDIFIER CONNECT APP Mild/Strong Noise Cancellation Mode Switch Ambient Sound Volume Control Wearing Detection Function Control Tapping Function Settings Timed Shutdown Modify Earbuds Pairing Name Earbuds Battery Level Display Tapping Sensitivity Control Earbuds Prompt Tone Volume Control Earbuds Fitting Detection FAQs When charging the charging case, the indicator is off. • Please ensure the charging case is correctly connected with power source. No sound • Check if the earbuds are operating. • Check if the earbuds volume are at an appropriate level. • Check if the earbuds are correctly connected with mobile phone. • Check if the earbuds are operating within a normal working range. The call quality of the earbuds are not good. • Check if mobile phone is in an area with strong signal. • Please ensure the earbuds are within effective distance (10m) and no obstacle between the earbuds and mobile phone. When playing music, cannot control pause/play/next track via the earbuds. • Please ensure the paired device support AVRCP (Audio/Video Remote Control Profile) profile. The tapping function is too sensitive or not sensitive. • Please ensure you are tapping within the effective area with a moderate intensity or at an appropriate angle. You can also adjust to a desired tapping sensitivity via the EDIFIER CONNECT APP. After one earbud alone is connected to another mobile phone, there is no sound from the other earbud when used again. • When one earbud alone is connected to another mobile phone, the interconnection between the left and right earbuds may have been disconnected. To restore the two earbuds mode, double click the pairing button on the case to resume interconnection between the left and right earbuds. Then try again. Wearing detection function is not sensitive or too sensitive. • To ensure every wearing of the earbuds by user can be recognized, the recognition of wearing detection have been slightly raised. If not used, please place the earbuds back into the case for charging and storage; it is better not to place the earbuds alone in the pocket or on the desk for long periods of time, so as to avoid interference with the wearing detection function or missing of the earbuds. You can also set the automatic in-ear detection function to other functions or close it via the EDIFIER CONNECT APP. Maintenance • • • • • • • • If not used for long periods of time, please charge the product with lithium battery every three months. Keep the product away from humid places to avoid affecting internal circuit. Do not use the product during intense exercise or with much sweat to prevent sweat from dropping into the product to make damage. Do not put the product in places exposed to sun or with high temperature. High temperature will shorten service life of electronic components, damage battery and make plastic components deformed. Do not put the product in cold places to avoid damaging internal circuit board. Do not dismantle the product. Non-professional personnel may damage the product. Do not drop, strongly vibrate, strike the product with hard object to avoid damaging internal circuit. Do not use drastic chemicals or cleaner to clean the product. Do not use sharp objects to scratch product surface to avoid damaging shell and affecting facade. FCC Regulatory Compliance Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. RF Exposure Compliance This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. ISED Regulatory compliance This device contains licence-exempt transmitters that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : L’appareil ne doit pas produire de brouillage; L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé. IB-200-000000-14 名 称: 说明书FCC ISED认证说明-便携式音箱及耳机 材 质: 尺 寸: 125×120(MM) 80g书纸 版本号及料号: V1.2/IB-200-000000-14 版面设计: 校 对: 批 准: V1.1 改IC警告语/V1.2 IC改为ISED和更改部分文字说明 东莞市漫步者科技有限公司 couteurs True Wireless avec atténuation active du bruit True Wireless Earbuds with Active Noise Cancellation Digital Noise Cancellation Headphone fit detection Ambient Sound Mode Role-swapping Bluetooth profile Profiles Bluetooth Perfiles Bluetooth Perfis de Bluetooth Bluetooth プロファイル Frequency response Réponse en fréquence Respuesta de frecuencia Resposta de frequência Sound pressure level Niveau de pression acoustique Nivel de presión sonora Nível de pressão sonora 音圧レベル インピーダンス A2DP / AVRCP / HFP 20Hz - 20KHz 92±3dB SPL (A) 24Ω 周波数応答 Accessories: Earbuds x2, Charging case x1, Charging cable x1, Ear tips x4 pairs, Storage bag x1 20 Hour Playtime Quick Charge Impedance Impédance Impedancia Impedância IP54 Dust and Water Proof Input(charging case) Entrée(étui-chargeur) Entrada(carcasa de carga) Entrada(bolsa de carregamento) Scan and download EDIFIER CONNECT APP Scannez et téléchargez l'application EDIFIER CONNECT 入力 (充電ケース) 5V AAC Audio Decoding 1A Playback time: ANC on: around 5 hours (earbuds) + 12 hours (charging case) ANC off: around 6 hours (earbuds) + 14 hours (charging case) 1. Use for extended periods at high volume may affect your hearing capacity. Use product responsibly. 2. Playback time and charging time may vary, depending on surroundings, volume level and audio sources. 3. Images are for illustrative purposes only and may differ from the actual product. 1. L'utilisation à un niveau de volume élevé pendant une longue durée peut altérer votre capacité auditive. Utiliser ce produit de façon responsable. 2. L'autonomie en lecture et la durée de charge varient, selon l'environnement de lecture, le volume et les sources audio utilisées. 3. Les images utilisées servent de référence uniquement, et peuvent ne pas correspondre au produit. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by EDIFIER is under license. Other trademarks and trade names are those of their respective owners. White FCC statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC statement:CAN ICES-3(B)/NMB-3(B). Edifier International Limited Made in China www.edifier.com Model: EDF200036 210-155039 SN FCC ID: Z9G-EDF132 IC: 10004A-EDF132
advertisement
Key Features
- True Wireless
- Active Noise Cancellation
- Touch Controls
- Multiple Sound Modes
- Wearing Detection
- EDIFIER CONNECT App
Related manuals
Frequently Answers and Questions
How do I connect the earbuds to my phone?
Place the earbuds in the case, press and hold the button on the case for 3 seconds to enter Bluetooth pairing mode. Set your phone to search for and connect to "EDIFIER TWS NB5".
How do I switch between noise cancellation modes?
Double click the left earbud to cycle through noise reduction mode, ambient sound mode, and normal mode.
What is the battery life of the earbuds?
Around 5 hours of playback time with ANC on, and 6 hours with ANC off. The charging case provides an additional 12 hours with ANC on, and 14 hours with ANC off.
Can I use only one earbud at a time?
Yes, you can use either earbud independently. However, the noise cancellation feature is only effective when both earbuds are used.