HME DX300 Quick Start Manuals

IN THE PRESS BOX
Setup
90°
angle
1 Screw ANTENNAS to connectors at 90° angle
Antenna
Connections
Electrical
Outlet
2 Connect POWER ADAPTER and tighten nut
securely to base station
Power Adapter
3 IMPORTANT!
4 Press power button to POWER ON
Locate BASE STATION so there are no physical
obstructions to your sideline communicators
5 Insert HEADSET plug all the way into connector
Power
Button
6 For multiple base stations, connect with
provided network cable
BASE OUT
BASE IN
Network Cable
Operation
Headset Volume
Headset Controls
Left
Headset
Right
Headset
Channel Indicator Lights
(Offense, All or Defense)
Green Listen Only
Red
Talk and Listen
Channel Select Button
(Offense, All or Defense)
TALK Button
(Push ON – Push OFF)
HME# 400G606
Rev C 10/9/08
ON THE FIELD
All-In-One
Beltpac & Headset
Headset
Or
Double
Muff
Headset
Single
Muff
Headset
1 Insert headset plug all the
way into connector
PWR
Button
2 Press and release PWR
(power) button
3 Put headset on and
Slide
to fit
adjust volume
4 Clip beltpac on your belt
PWR
Button
1 Press and release PWR (power) button
2 Put headset on and adjust volume
3 Adjust slide to fit head
Operation
or
Use the controls on the beltpac or the all-in-one headset as follows:
Turn power on/off
Speak to Offensive Coaches
Increase headset volume
Speak to Defensive Coaches
Decrease headset volume
Speak to All Coaches
Change Battery
Battery
release latch
Battery
release latch
If you hear “Change battery” in your headset:
z If using beltpac, remove it from its pouch
z Slide battery release latch in direction of arrow
z Lift battery out of beltpac or headset
z Place battery in battery-charger port for recharging
z Install fully charged battery in beltpac or headset
z If using beltpac, put it back in its pouch
All-in-one headset
Beltpac
">