Fujitsu DISPLAY E22 TOUCH Manual
Fujitsu DISPLAY E22 TOUCH is a monitor that offers amazing viewing clarity and versatile connectivity options. With its sleek design and user-friendly features, this monitor is perfect for both professional and personal use. It features a 21.5-inch Full HD display with a resolution of 1920 x 1080 pixels, providing crisp and detailed images. The monitor also boasts a wide viewing angle of 178 degrees, ensuring that you can enjoy a clear view from almost any angle. The DISPLAY E22 TOUCH also comes equipped with a variety of ports, including HDMI, DVI-D, and VGA, making it easy to connect to your computer, laptop, or other devices.
Advertisement
Advertisement
Display
FUJITSU Display E22 Touch
Congratulations on your purchase of an innovative product from Fujitsu.
Latest information about our products, tips, updates etc. can be found on the Internet at:
http://www.fujitsu.com/fts/
For driver updates, please go to: http://support.ts.fujitsu.com/download
Should you have any technical questions, please contact:
● our Hotline/Service Desk (see Service Desk list or visit:
http://support.ts.fujitsu.com/contact/servicedesk)
● your sales partner
● your sales office
We hope you enjoy working with your new Fujitsu system!
Published by / Contact address in the EU
Fujitsu Technology Solutions GmbH
Mies-van-der-Rohe-Straße 8
80807 Munich, Germany
http://www.fujitsu.com/fts/
Copyright
© Fujitsu Technology Solutions GmbH 2014. All rights reserved.
Publication Date
08/2014
Order No.: A26361-K1544-Z320-1-8N19, edition 1
FUJITSU Display E22 Touch
Operating Manual
For your safety
Before you operate the monitor
Installation instructions
Operating instructions
Technical support (FAQ)
Technical data
2
5
6
9
14
16
Remarks
Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ.
Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.
Trademarks
Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited or its subsidiaries in the United States and other countries.
Microsoft and Windows are trademarks or registered trademarks of the Microsoft Corporation in the United States and/or other countries.
VESA, DDC and DPMS are registered trademarks of Video Electronics Standards
Association.
All other trademarks specified here are the property of their respective owners.
Copyright
No part of this publication may be copied, reproduced or translated without the prior written consent of Fujitsu.
No part of this publication may be saved or transferred by any electronic means without the written approval of Fujitsu.
Contents
Contents
Fujitsu 1
2
For your safety
For your safety
Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference.
CE marking
The shipped version of this device complies with the requirements of European Union directives
2004/108/EC "Electromagnetic compatibility", 2006/95/EC "Low voltage directive" and 2009/125/EC
"Ecodesign Directive".
FCC Class B Radio Frequency Interference Statement
WARNING: (FOR FCC CERTIFIED MODELS)
NOTE:
This equipment has been tested and found to compl with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
NOTICE:
●
The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
● Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
● The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.
WARNING:
To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified personnel only.
Fujitsu
WEEE Declaration
For your safety
Disposal of waste equipment by users in private household in the European Union.
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handling it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Precautions
● Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
● Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.
● Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the monitor and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided.
● The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
● The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.
● Unplug the unit during a lightening storm or when it will not be used for long period of time. This will protect the monitor from damage due to power surges.
● Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
● Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a fire or electric shock. Never spill liquids on the monitor.
● Do not attempt to service the monitor by yourself; opening or removing covers can expose you to dangerous voltages and other hazards. Please refer all servicing to qualified service personnel.
● To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 - 240V AC, Min. 5A.
● The wall socket shall be installed near the equipment and shall be easily accessible.
Fujitsu 3
For your safety
Special Notes on LCD monitors
The following symptoms are normal with LCD monitor and do not indicate a problem.
● You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
● The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the time.
● Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image when the same image has been displayed for a long time. The monitor will slowly recover from this.
● When the screen becomes black or flashing, or cannot illuminate any more, contact your dealer or service center to replace parts. Don’t repair the screen by yourself!
!
To avoid the risk of fire, the E22 TOUCH Monitor must only be used with the original power supply unit: ADPC1965
The supplied AC/DC power supply unit must only be used with the E22 TOUCH Monitor.
4 Fujitsu
Before you operate the monitor
Before you operate the monitor
Features
● 54.7 cm (21.5“) 16:9 TFT Color LCD Monitor
● Crisp, Clear Display for Windows
● Recommend Resolutions: 1920 x 1080@60Hz
● Space Saving, Compact Case Design
Packing list
The product package should include the following items:
● Power Cord
● D-SUB Cable
● USB Cable
● CD with software and documentation
Fujitsu 5
6
Installation instructions
Installation instructions
Power cord
► Please make sure using the correct power cord in your area.
► This LCD monitor has an External universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area (no user adjustment is required).
► Connect the AC-power cord into your LCD monitor’s power input socket. The AC-power cord may be connected to either a wall power outlet or the power outlet socket on your PC, depending on the type of power cord supplied with your LCD monitor.
Transporting the device
!
Transport all parts separately in their original packaging or in a packaging which protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room where it will be used, condensation may occur. Before operating the device, wait until it is absolutely dry and has reached approximately the same temperature as the installation site.
Cleaning the device
!
Switch off the device and unplug the power plug.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode plastic.
Ensure that no liquid enters the device.
The display surface of the device is sensitive to pressure and scratches. Clean it only using a soft, slightly moistened cloth.
The surface of the casing can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild domestic detergent and then carefully wrung out.
Fujitsu
Controls and connectors
Installation instructions
► Connect video cable to the monitor and the computer (VGA, DVI or HDMI).
► Connect the AC power cable to the power supply and the wall outlet (grounded).
Then connect the power supply to the monitor.
► Connect the USB cable to the monitor and the computer.
1
2
3
1 = USB (Downstream)
2 = USB (Downstream)
3 = HDMI Signal input
4 = DVI Signal input
4 5 6 7 8
5 = D-SUB Signal input
6 = Audio Input
7 = USB (Upstream)
8 = USB (Downstream)
Fujitsu 7
8
Installation instructions
Adjusting the viewing angle
For optimal viewing, it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference.
► Hold the stand so you do not topple the monitor when you adjust the monitor’s angle.
You are able to adjust the tilted angle from 12° to 60°.
!
Do not touch the LCD screen when you adjust the angle. It may cause damage or break the LCD screen.
Careful attention is required not to catch your fingers or hands when you adjust the angle
Fujitsu
Operating instructions
Operating instructions
General instructions
The monitor functions can be controlled with the On Screen Display.
Current setting will be saved and OSD will be turned off when the keys are not touched for a period
of time (see chapter “On Screen Display”, page 10).
1 = Auto Config / SOURCE / EXIT
2 = + / Volume
3 = - / ECO
4 = MENU
5 = Power button
Fujitsu 9
Operating instructions
On Screen Display
Auto Configuration button / SOURCE / EXIT
► When OSD menu is off, press to select input from external sources.
When VGA is selected, the first time also the Auto Adjustment function will be invoked in order to optimize the H.Pos, V.Pos, Clock and Focus.
► When OSD menu is on, press to leave submenu or to exit the OSD menu.
+ / Volume
► When there is no OSD, press Volume button to active volume adjustment bar.
► Press - or + to adjust volume.
- / ECO
► Press to activate the ECO function and adjust the Image Ratio when the OSD is OFF.
► Press to navigate through adjustment icons when OSD is ON or adjust a function when function is activated.
MENU / ENTER
► Press to start OSD menu or enter submenu.
Power Button
► Press to switch the monitor on or off.
Power Indicator
Power indicator
Blue
Status
Power On mode
LED off Off mode
10 Fujitsu
Operating instructions
OSD Lock Function
► To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on.
Changing the monitor settings using the OSD menu
T P V
Contrast
Brightness
Eco Mode
DCR
Luminance
50
90
Standard
Off
AUTO
:Exit :Move
MENU
:Select
► Press
► Press + or - to navigate through the menu items. Once the desired item is highlighted, press the MENU button to enter.
► Press + or - again to navigate through the sub-menu. Once the desired item is highlighted, press MENU button to activate it.
► Press + or - to adjust the setting.
► To exit and save, press the EXIT button. If you would like to adjust other settings, please repeat steps 2-4.
Fujitsu 11
Operating instructions
Adjusting the picture
Adjusting the luminance
Call up the Luminance setting window
Contrast
Brightness
Eco
Standard
Text
Internet
Game
Movie
Sports
DCR
Off
On
Contrast from Digital-register
Backlight Adjustment
Standard Mode
Text Mode
Internet Mode
Game Mode
Movie Mode
Sports Mode
Disable dynamic contrast ratio
Enable dynamic contrast ratio
Adjusting the image setup
Call up the Image Setup setting window
Clock
Phase
H.Position
V.Position
Image Ratio
Wide/4:3
Adjust picture Clock to reduce Vertical-Line noise
Adjust Picture Phase to reduce Horizontal-Line noise
Adjust the vertical position of the picture.
Adjust the horizontal position of the picture.
Select Picture wide and 4:3
12 Fujitsu
Adjusting the color temperature
Operating instructions
Call up the Color Temperature setting window
Warm
Normal
Cool sRGB
User
Red
Green
Blue
Recall Warm Color Temperature from EEPROM.
Recall Normal Color Temperature from EEPROM
Recall Cool Color Temperature from EEPROM.
Recall SRGB Color Temperature from EEPROM.
Red Gain from Digital-register
Green Gain Digital-register
Blue Gain from Digital-register
Adjusting the OSD Setup
Call up the OSD Setup setting window
H.Position
V.Position
Timeout
Language
Adjust the horizontal position of OSD
Adjust the vertical position of OSD
Adjust the OSD Timeout
Select the OSD language
Adjusting the Extras
Call up the Extra setting window
Input Select
VGA/DVI/HDMI
DDC/CI
Reset yes or no
Information
Select input source VGA, DVI or HDMI
Turn ON/OFF DDC/CI Support
Reset the menu to default
Show the information of the main image source
Fujitsu 13
Operating instructions
Technical support (FAQ)
Problem & Question
Power LED is not on
No Plug&Play
Picture is fuzzy
Picture bounces or a wave pattern is present in the picture
The power LED is ON (blue) but there’s no video or no picture.
Missing one of the primary colors
(RED, GREEN, or BLUE)
Screen image is not centered or sized properly.
Picture has color defects (white does not look white)
Poor brightness or contrast
Possible Solution
► AC power cable should be connected to power supply and power supply should be connected to monitor.
► Check if the PC system is Plug&Play compatible.
► Check if the Video Card is Plug&Play compatible.
► Check if the D-15 plug pin of Video Cable is bent.
► Adjust the Contrast and Brightness Controls.
► Move electrical devices that may cause electrical interference.
► Computer Power Switch should be in the ON position.
► Computer Video Card should be snugly seated in its slot.
► Make sure monitor’s video cable is properly connected to the computer.
► Inspect monitor’s video cable and make sure none of the pins are bent.
► Make sure computer is operational by hitting the CAPS
LOCK key on the keyboard while observing the CAPS
LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key.
► Inspect the monitor’s video cable and make sure that none of the pins are bent.
► Adjust pixel frequency (CLOCK) and PHASE or press hotkey (AUTO).
► Adjust RGB color or select color temperature.
Horizontal or vertical disturbances on the screen
Message:
No Signal
► When the brightness of the screen lowers after being used for a certain period and the function of the display is affected, send it to our authorized service center for repair
► Use win 95/98/2000/ME/XP shut-down mode Adjust
CLOCK and PHASE or perform hot-key (AUTO-key).
► Check that the signal-cable is properly connected. If the connector is loose, tighten the connector’s screws.
► Check the signal-cable’s connection pins for damage
Message:
Input no support
Your computer has been set to unsuitable display mode.
► Set the computer to display mode given in the following
table in chapter “Preset operating modes”, page 17.
14 Fujitsu
Windows shut-down mode
Operating instructions
Adjustment Status
CLOCK (pixel frequency)
PHASE
PHASE and CLOCK
Controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the picture has not correct width.
Adjusts the phase of the pixel clock signal. With a wrong phase adjustment the picture has horizontal disturbances in light picture.
For PHASE and CLOCK adjustment use “dot-pattern” or
Win 95/98/2000/ME/XP shut-down mode pattern.
Fujitsu 15
Technical data
Technical data
Product Name E22 TOUCH
Model Name WP2-215META
Dimensions and weight (LCD Display)
Visible diagonals:
Screen size:
Dimensions (W x H x D) incl. monitor base:
Dimensions box (W x H x D):
Weight:
Pixel size:
Maximal resolution:
54.7 cm (21.5“) 16:9
476.6 mm x 268.1 mm
510 mm x 344 mm x 96 mm
574 mm x 423 mm x 140 mm
Net 4.2 kg
0.2483 x 0.4825
1920 x 1080 pixels
Electrical Data
Video:
● analogue, positive, 0.7 VSS, 75 Ω
● digital DVI-D with HDCP
● digital HDMI with HDCP
Synchronisation:
Horizontal frequency:
Refresh rate:
Maximum pixel rate:
Power supply:
Total power consumption:
Separate H/V-Sync.
31 kHz …. 83 kHz (VGA )
31 kHz …. 83 kHz (DVI)
55 Hz .... 76 Hz (VGA)
55 Hz …. 76 Hz (DVI)
210 MHz (VGA), 170 MHz (DVI), 170 MHz (HDMI)
100 V - 240 V, 50/60 Hz
● typ. 25 W (Normal mode)
● 0,5 W (Stand-By mode)
● ≤ 0.5W (Off mode)
Audio:
Environmental conditions
2 x 2 W
Environment class 3K2, DIN IEC 721
Operating range: 5 °C .... 35 °C
Humidity: 15 % .... 85 %
Limit range:
Humidity:
Condensation must be avoided.
5 °C .... 35 °C
15 % .... 85 %
16 Fujitsu
External Controls
Switch
Technical data
● Auto Adjust Button / EXIT / SOURCE
● + / Volume
● - / ECO
● MENU/ENTER
● Luminance
Functions
● Extra
Touch screen specifications
Touch Technology
Touch Method
Stylus Diameter
Projective capacitive touch
Finger or Cap. Stylus
>6.5mm
Accuracy
OS Compatibility
Microsoft Windows 7
Microsoft Windows 8
Within 1mm each target & 10% Jitter limit on moving
Multi touch + Gesture (10 points + win7 gesture)
Multi touch + Gesture (10 points + win8 gesture)
Preset operating modes
The picture position and size have been set to optimum values at the factory for the operating modes listed below:
640 x 480
720 x 400
800 x 600
1024 x 768
1280 x 720
1280 x 1024
1440 x 900
1920 x 1080
60/75 Hz
70 Hz
60/75 Hz
60/75 Hz
60 Hz
60/75 Hz
60 Hz
60 Hz
Fujitsu 17
Technical data
SUB D port
5 1
10 6
15 11
Pin Meaning
1
2
3
Video input red
Video input green
Video input blue
4 Ground
5 Ground
6
7
8
Video ground red
Video ground green
Video ground blue
11 Ground
18 Fujitsu
DVI-D port
1
9
17
Pin Meaning
1
2
3
TMDS Data 2-
TMDS Data 2+
TMDS Data 2/4 Shield
8
9
10
11
Analog Vertical Sync
TMDS Data 1-
TMDS Data 1+
TMDS Data 1/3 Shield
15 Earth
16 Hot Plug Detect
17
18
19
TMDS Data 0-
TMDS Data 0+
TMDS Data 0/5 Shield
22
23
24
TMDS Clock Shield
TMDS Clock +
TMDS Clock -
Fujitsu
Technical data
19
Technical data
HDMI port
19 17 15 13 11 9 7 5 3 1
18 16 14 12 10 8 6 4 2
Pin Meaning
1
2
3
4
5
6
7
8
9
TMDS Data 2+
TMDS Data 2 Shield
TMDS Data 2-
TMDS Data 1+
TMDS Data 1 Shield
TMDS Data 1-
TMDS Data 0+
TMDS Data 0 Shield
TMDS Data 0-
11 TMDS Clock Shield
13 CEC
15 SCL
16 SDA
19 Hot Plug Detect
20 Fujitsu
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement
Key features
21.5 inch Full HD (1920 x 1080) display.
178-degree wide viewing angle for clear viewing from almost any angle.
Multiple ports for easy connectivity including HDMI, DVI-D, and VGA.
VESA mount compliant for flexible mounting options.
Energy Star certified for energy efficiency.
Frequently asked questions
You can adjust the monitor's settings using the On-Screen Display (OSD) menu. To access the OSD menu, press the Menu button on the front of the monitor.
The recommended resolution for this monitor is 1920 x 1080 at 60Hz.
Yes, this monitor is VESA mount compliant, which means you can mount it on a wall using a VESA mount bracket.