General Tools 840038 1.5 in. x 3/8 in. Fluted Dowel Pins Installation Guide

Wood Joining &

Woodworking Tools

WWJ14

Precision, Specialty and Innovation . . . Since 1922

This is the cutting-edge

Face Frame Jig System

Clamp, drill and fasten in one simple set-up!

This easy-to-use system simpliﬁ es fabrication and increases productivity of face frames, cabinet doors and other woodworking assemblies. In one simple operation, you can align, securely clamp, bore pocket holes and screw components together—right out of the box.

Now available through Woodcraft Supply:

woodcraft.com/generaltools

General Tools & Instruments 80 White Street, New York, NY 10013 | tel 800-697-8665 | www.generaltools.com

Crown King

Crown Molding Jig helps you make seamless, perfectly mitered interior and exterior corner joints.

#880

The E•Z

Pro

™

Mortise & Tenon Jig lets you make perfectly matched mortise & tenon joints with one jig.

#870

The E•Z

Pro

™

Dovetail Jig lets you make dovetail and box joints — through or half-blind.

#861

The E•Z

Pro

™

Pocket Hole Jig has everything you need to make ﬂ ush, corner and angle pocket hole joints.

#850

The E•Z

Pro

™

Doweling Jig lets you make perfectly aligned dowel joints every time.

#851

WOOD JOINING TOOLS

Face Frame Jig

THE

FIRST OF ITS KIND:

Clamp, Drill and Fasten In One Simple Set-Up

PROFESSIONAL FACE FRAME

Assemble professional

SINGLE JIG SYSTEM

quality face frames and cabinet doors using General’s

NEW

patented

Face Frame

Jig System

•

Accommodates Stock from 1-1/4" to 2-1/2" Wide

•

Pocket Hole Spacing Adjustment 3/4" to 1-1/2"

•

Stock Thickness Adjustment 3/4" to 1"

•

Includes Step Drill with Locking Collar and Face Frame Fasteners

•

Patent # US 6,394, 712 B1

Professional Face Frame Jig System X1 - #8561

• 1 Face Frame System Jig

• 1 Face Frame System Heavy Duty T-Track (20")

• 1 Face Frame System Carriage Stop Set (2 Stops)

• 1 Face Frame System Step Drill

• 1 Face Frame System Square Drive Screwdriver Bit

• 1 Face Frame System Square Drive Fasteners (100 Fine)

UPC NO.

02194 6

8561

02195 3

02191 5

02193 9

02192 2

8562

856

856T

856S

00052 2

02122 9

08498 9

32

8492

8598

Face Frame Jig System X1

Face Frame Jig System X2

Face Frame Jig

Heavy Duty T-Track

Carriage Stops (2)

Step Drill

Square Drive Screwdriver Bit

Square Drive Fasteners (100)

4

General Tools & Instruments

Professional Face Frame Jig System X2 - #8562

• 2 Face Frame System Jigs

• 2 Face Frame System Heavy Duty T-Tracks (20”)

• 1 Face Frame System Carriage Stop Set (2 Stops)

• 1 Face Frame System Step Drill

• 1 Face Frame System Square Drive Screwdriver Bit

• 1 Face Frame System Square Drive Fasteners (100 Fine)


Crown Molding Jig

A Cutting Guide For Crown Moldings

Professionally Cut Perfectly Mitered Interior and Exterior

Corner Joints – in the same alignment as they are installed on the wall

CEILING

WALL

Create the Crown in Four Easy Steps

1. Measure

2. Set-Up

3. Cut

4. Install

Eliminates:

•

Difficult angle calculations

•

Coping of joints

•

Compound-angle cutting

•

Auxiliary fences

•

Confusing upside-down miter box positioning

45º Spring Angle

Crown Molding Jig with

Adapter for 52º and 38º Spring Angles

No. 881

See CROWN KING in action!

www.generaltools.com/crownking

UPC NO.

02200 4

881


5


Mortise & Tenon Jig

General Tools offers one of the best assortments of wood joining jigs available including our new Mortise and Tenon

Jig, The Dovetailer II Jig, and the award-winning EZ Pocket

Hole Jig and EZ Jointer Clamp Kits. These heavy-duty woodworking tools are ideal for furniture building, cabinetry making and other professional carpentry projects. In addition, we offer plenty of wood joining accessories such as screws, plugs and drill bits.

● Create professional matching Mortise & Tenon Joints

Right Out of the Box

● The first of its kind,

all-in-one precision machined Mortise &

Tenon Jig

● Produce 1/4", 3/8" and

1/2" Mortise and Tenons

● Includes: 1/4" high-speed

steel spiral upcut router bit and User’s Manual

The Mortise & Tenon joint has been used for thousands of years. Not until now has someone figured out how to provide a fast and straightforward all-in-one solution for cutting both a matching mortise & tenon with a single affordable jig.

General’s E•Z Pro ™ Mortise & Tenon Jig is ready to use right outof-the-box to produce the widely used 1/4” mortise and tenon joint. Using a plunge router with the jig, woodworkers of all levels can quickly and easily cut both mortises and tenons ranging from

1/4" to 1/2" thick, and from 1" to 3" wide. Without difficulty, this unit can easily handle wood stock ranging from 1/2" to 1-

1/2" thick and can cut multiple mortises in a single long piece.

No. 870

Patent Pending

• Length: 14-1/2" Width: 4-1/2" Height: 4" Weight: 2-1/2 lbs

• Kit includes: 1/4" Spiral upcut router bit, Bushing kit, Wrench, User’s manual

6


UPC NO.

26008 3

870


Dovetail Jig

“The Easy Way to Make

Professional Furniture Joints”

DOVETAIL JIG

With the E•Z Pro

™

Dovetailer

II and your router, you can cut

Professional Dovetail Joints, Simply and Accurately . . .

Right Out Of The Box!

• Self-aligning design ensures that both ends of the dovetail joint match-up evenly every time

• Sturdy machined one piece aluminum construction

• Easily adjusts the dovetail interference to create loose or tight joints

• Portable to your worksite or home workshop

• Use with hand or table router

• New table router control knobs assure safe, comfortable and accurate use

• No need to bolt to the jig onto workbench like many expensive dovetail jigs

• Integrated clamps allow precise clamping of jig to work piece

• Accommodates boards of any widths

• Length: 12"; Width: 3"; Height: 3";

Weight: 2-lbs. 1.1oz.

Kit includes: 1/2" Dovetail Router bit, User’s Manual

Cuts Half-Blind Joints

Cuts Through Joints

UPC NO.

00861 9

861

No. 861

Patent No. 7828024


7


Pocket Hole Jig

Pocket hole joints are sturdy and simple to make with a drilling jig. By drilling steeply pitched counter bores in one joint member, you can drive selftapping screws into the other without pilot holes.

Ideal for leg and rail connections and face frame cabinet construction.

Pocket Hole Jig Kits

• Ideal for leg-and-rail connections, cabinet construction, sneaking screws into tight-squeeze spots or fastening picture frame miters

• Heavy-duty aluminum extrusion and hardened steel bushings

• By drilling steeply pitched counterbores in one joint member, you can drive self-tapping screws into the other joint member without pilot holes

• Built to be portable or bench mounted

No. 849

849 KIT INCLUDES

• 1 Pocket Hole Jig; 3/8" Step Drill Bit; 1 3/8" Drill Stop and Hex Wrench;

6" Steel Square Drive Bit; Square Drive Screws, Instructions

UPC NO.

00515

849

850 KIT INCLUDES

• 1 Pocket Hole Jig; 3/8" Step Drill Bit; 1 3/8" Drill Stop and Hex Wrench;

6" Steel Square Drive Bit; 25 Course Square Drive Screws;

25 Fine Square Drive Screws; 25 Wooden Pocket Hole Plugs, Hard Molded

Carrying Case and Instructions

No. 850

8


UPC NO.

00850 0

850


Pocket Hole Jig

Woodworking

For the Professional and the Do-It-Yourselfer

Pocket Hole Jig Kit

Award Winning Ingenuity!

849

SMART DESIGN

• Heavy-duty aluminum extrusion

& hardened steel drill bushings

• Built to be portable or bench mounted, and designed with a built-in clamping system

THREE TYPES OF

POCKET HOLE JOINTS

• Flush, Corner & Angle

850

Patent No. 6,254,320

For more information visit generaltools.com/joiningtools

Photos property of

Woodworker’s Journal


9

No. 841


Doweling Jig Kits

Our E•Z Pro Doweling Kits includes everything you need to make beautiful wood joints like a pro! This heavy-duty aluminum jig simplifies the doweling process, allowing you to create Edge-to-Edge,

Right Angle and Edge-to-Surface joints with little effort. No. 8401 Dowel Accessory Kit can be used with both the No. 840 and No. 841 Doweling Jigs.

DOWELING JIG KITS

841 DELUXE DOWELING JIG KIT

• Dowels add mechanical strength to butt joints and keep miters lined up during clamping

• The pointed notches on the working edges of our jig centers the drill bit automatically for precise registration

• Create 3 types of dowel joints: Edge to edge, right angle, edge to surface, as well as 3 sizes of dowel joints; 1/4", 5/16" and 3/8"

• Ideal for 5/8", 3/4" and 1" thick stock

• Kit includes: 1 Dowel Jig; 3 Brad Point Drill Bits;

1/4", 5/16", 3/8"; 3 steel stop collars, 1/4", 5/16" and 3/8" with Hex Wrench, 6 Dowel Center Points;

2 each of 1/4", 5/16" 3/8", supply of wood dowels,

Instructions

UPC NO.

000317

841

No. 851

10


Patent No. 7,001,118

851 DELUXE DOWELING JIG KIT

The Deluxe Doweling Jig Kit allows users to produce three types of strong, precision dowel joints in three sizes (1/4 in., 5/16 in. and 3/8 in.) with little effort. Whether creating edge-to-edge, right angle corner or right angle edge-to-surface dowel joints, the heavy duty aluminum jig effectively simplifies the process and is anodized in a gold color to impede corrosion. The pointed notches on the working edges of the jig center the drill bit automatically for precise registration. The included wood dowels add mechanical strength to butt joints and keep miters lined up during clamping.

• Kit includes: 1 Dowel Jig; 3 Brad Point Drill Bits (1/4 in., 5/16 in. and 3/8 in.

diameter); 3 Steel Stop Collars (1/4 in., 5/16 in. and 3/8 in. diameter) with Hex

Wrench; 3 Bushings (1/4 in., 5/16 in. and 3/8 in. diameter); 6 Dowel Center

Points (2 each of 1/4 in., 5/16 in. and 3/8 in. diameter); 3 sets of 1-1/2 in. long

Wood Dowels (24 each of 1/4 in., 5/16 in. and 3/8 in. diameter); Wood Glue;

Instructions

UPC NO.

08401 9

851

Photos property of Woodworker’s Journal

General’s Pro Doweling Jig is a precision jig that assures the accurate line-up of dowel holes in furniture and carpentry. Simply clamp the jig onto


Pro Doweling Kit

your workpiece to quickly and accurately drill holes for dowel pins requiring exact alignment in the edge, end or surface of your work.

PRO-DOWELING KIT

840

For clean joints that need to be strong and fastener-free, there’s almost no substitute for the dowel joint. However, if dowel holes are even slightly askew, the dowels won’t mesh rendering the joint unusable.

General’s Pro Doweling Jig offers a simple, versatile way to produce precision edge-to-edge, right angle, or edge-to-surface joints. The Kit features: three size dowels (1/4", 5/16" and 3/8"), and the jig has three different drilling positions designed for stock of 5/8", 3/4" and 1" thick.

Steel stops allow you to vary the depth of the cut. Perfect for joints that will be press fit or glued.

PRO-DOWELING KIT

• A precision jig that assures accurate line up of dowel holes in furniture and carpentry

• Revolving hardened sintered turret has six twist drill sizes

• Instructions included

• Drill sizes:

3/16", 1/4", 5/16", 3/8", 7/16", 1/2"

• Kit includes:

1 Doweling Jig;

3 Brad Point Drill Bits, 1/4", 5/16", 3/8";

Dowel Centers Set from 3/16" ID to 1/2" OD;

3 Drill Stops, 1/4", 5/16", 3/8";

30 Dowel Pins, 10 each 1/4", 5/16", 3/8";

Wood Glue

UPC NO.

24120 7

840


11


Jointer Clamps

General’s E•Z Pro

™

Jointer Clamp Kit is the alternative to expensive jointers. Now, you can straight-line rip crooked boards using your table saw! Just attach your crooked board to a piece of straight stock using the Jointer

Clamps and run the stock along the rip fence to rip the crooked board. Works in two easy passes. Great for use with long stock. Patented swing arm design allows you to accurately rip wide boards with ease.

TRU-EDGER JOINTER CLAMPS

E-Z Jointer Clamp Kit (Model 846) under US Patent #7000519, is the long-awaited alternative to expensive jointers. Now, you can straight-line rip or joint crooked boards using your table saw! Just attach your crooked board to a piece of straight stock using the Jointer Clamps and run the stock along the rip fence to rip the crooked board. The Jointer Clamp works in two easy passes and is great for use with long stock.

• The long awaited alternative to expensive jointers!

• Straight line rip crooked boards on your table saw

• Get a dead-flat edge every time, with no extra waste

• The jointer clamps work on any length stock up to 2" thick

• Instructions included

UPC NO.

00001 0

846

Patented Swing Arm design allows you to accurately rip wide boards with ease

Photos property of

Woodworker’s Journal

12



Precision Drill Guide

The AccuDrill Precision Drill Guide adds a whole new level of accuracy to your standard power drill. The AccuDrill is great for angle drilling, doweling, plug cutting and even edge sanding. With the easy-to-use protractor scale, you can adjust the Drill Guide in five degree increments from 0-45°, left and right. In addition, V-Guides on the base permit drilling through dowel or other rounded stock. Attaches to all 3/8" and 1/2" power drills. Folds for tool-box storage.

TM

PRECISION DRILL GUIDE

• Attaches to all 3/8" and 1/2" power drills

• Cross slide lock for accurate shaping and carving

• 3/8" capacity drill chuck with key

• Positive stop for accurate drill depth control

• Dual locking knob and handle holds precise angle setting

• Folds flat for tool box storage

• Easy-to-read protractor scale has 5° graduations (0° - 45° left or right)

• V-guides automatically center round stock for drilling

• Self centering channel for edge drilling

UPC NO.

23059 1

36/37

45°– 0° 0°– 45°

�

�

36/37

�

For Round Bar Center Drilling

�

Straight Edge Center Drilling

� �


13

8497

8498


Pocket Hole Accessories

Pocket-hole joinery or pocket-screw joinery is one of the best methods for joining two pieces of wood to ever come down the pike. Fixing a squeaky chair, or a wiggly table, is as easy as adding a few pocket holes and screws to pull the separating pieces together. General’s Pocket Hole Screws No. 8497 and 8498 are used specifically for this purpose and are offered in both fine and coarse thread.

No. 8497 shown actual size of 1-1/4"

POCKET HOLE SCREWS

• Self-tapping

• Use a coarse thread screw in soft material (8497)

• Use a fine thread screw in hardwoods (8498)

• Nickel-plated

• Pan Head

• Size: 1-1/4"

UPC NO.

08497 2

8497

08498 9

8498

DESCRIPTION QTY.

Coarse Screws 100

Fine Screws 100

8497 shown

POCKET HOLE PLUGS

Pocket Holes are often hidden from sight on the back surface of a face frame, under a table top, or on the back of picture frame. What do you do about unattractive pocket holes that will be visible on a finished product the answer? Pocket hole plugs!

These wood plugs, made from 100% hardwood, can make the pocket holes beautifully disappear.

UPC NO.

DESCRIPTION

02123 6

8495

Pocket Hole Plugs, Hardwood

QTY.

50

8495

32

14


E•Z ™ PRO STEP DRILL BIT

The E-Z Step Drill Bit is great for creating pocket hole joints or counter boring. The 3/8" bit is made of high speed steel and includes a drill stop and hex wrench for accurate setting of drill depth.

This item can also be used as a replacement bit for General’s Pocket Hole Jig Kit (#849).and

Deluxe Pocket Hole Jig Kit (#850).

• 3/8" x 6" (9.5 x 152mm) step drill bit

• High speed steel

• Ideal for creating pocket hole joints and counter-boring

• Includes 3/8" (9.5mm) steel drill stop with hex wrench

UPC NO.

00052 2

32


Pocket Hole & Dowling Accessories

SQUARE DRIVE BITS

For use with General’s Pocket Hole Screws. These drive bits are essential for building decks, benches, tables and other woodworking projects. General’s

Square Drive Bits have a hardened steel tip that assures perfect fit and lasts longer.

• #2 Square drive bits

• 3" (76mm) length

• 6" (152mm) length

• Use with deck screws

UPC NO.

02122 9

8492

DESCRIPTION

2-#2 Square Drive Bits

3" and 6" long

PLUG CUTTERS

Whether you’re building cabinets, toys, decks, furniture or railings, wooden plugs are a neat way to cover up the screw heads. Made from hardened alloy steel, General’s

Plug Cutters will cut a 3/8-inch plug from any wood stock and eject it, whether it's chucked in a press or hand-held drill. This is a great economical bit, perfect for homeowners.

• General’s Plug Cutters produce accurate plugs for covering screw holes in decking, flooring and other woodworking projects

• Permits choice of matching or contrasting plugs for decorative effect

• Engineered to start cutting plugs easily with hand-held drills or drill press

• Cutter will produce and eject straight plugs from stock up to 3/4" thickness

• Made of hardened alloy steel

• Individual sizes:

UPC NO.

23024 9

23030 0

23033 1

31A

31B

31C

3/8"

3/8"

3/8"

3/8" dia.

1/2" dia.

5/8" dia.

• Set of 3 Diameters - 1/4", 3/8", 1/2":

UPC NO.

23036 2

S31

SHANK

3/8"

31A 31B 31C

DRILL STOP SET

• For use on twist or brad point drills to prevent excessive drill penetration

• Positive depth control assures exact hole depths for multiple drilling jobs

• Black oxide finish on cold rolled steel

• Includes hex wrench

UPC NO.

SIZES INCLUDED

23096 6

S838

3/16" dia.,1/4" dia.,

5/16" dia., 3/8" dia.,

7/16" dia., 1/2" dia.

DOWEL CENTERS

• General’s dowel centers are the quickest and most accurate method to locate, transfer and match dowel holes

• Made of nickel plated steel

• Set includes: 8 pcs., two of each size:

1/4", 5/16", 3/8", 1/2" diameter

UPC NO.

25099 5

888

Dowel centers

DOWEL ACCESSORY KITS

• 8401 Kit includes: 3 Drill Bits - 1/4", 5/16", 3/8"; 3 Drill Stop

Collars, 6 Dowel Centers,

10 ea. Fluted Dowel Pins 1/4", 5/16", 3/8"

• Replacement bit for General’s E•Z Pocket Hole Jig Kit (No. 849)

• Accessories Kit for General’s Pro Doweling Kit (No. 840) and

E•Z Dowel Kit (No. 841)

• 841014 Kit includes: 12-1/4" Dowel Pins,

1-1/4" Brad Point Drill Bit, 1-1/4" Drill Stop Collar, 2-1/4"

Dowel Centers, 1 Hex Key

• 841516 Kit includes: 12-5/16" Dowel Pins,

1-5/16" Brad Point Drill Bit, 1-5/16" Drill Stop Collar, 2- 5/16"


• 841038 Kit includes: 10-3/8" dowel Pins,

1-3/8" Brad Point Drill Bit, 1-3/8" Drill Stop Collar, 2-3/8"


UPC

08401 9

NO.

8401

Dowel Accessory Kit

02119 6

841014

1/4" Dowel Accessory Kit

02120 2

841516


02121 9

841038


841516

8401

S838

888


15

840014

840516

840038

840012


Wood Joinery

As an FSC (Forest Stewardship Council), certified company, General’s Wood Joining Program includes wood based products that are manufactured in accordance with

FSC standards. The FSC is an independent, nongovernmental, not-for-profit organization established to promote the responsible management of the world’s forests and is nationally represented in more than

50 countries around the world.

FLUTED DOWEL PINS

A fluted dowel pin has a series of parallel grooves cut along its length providing channels through which excess glue—that is used to secure the dowel pin in its hole—can escape as the dowel is inserted. This relieves the hydraulic pressure that might otherwise split the timber when the mating pieces are clamped together. General’s fluted dowels are ideal for creating strong and secure joins in furniture, cabinets, trim and special woodworking projects.

● Made of straight-grained solid hardwood

● Expands when used with water-based glue for extra tight join

● Fluted for easy insertion

UPC NO.

DESCRIPTION

02101 4 840014 1/4" Fluted Dowel Pins

QTY.

72

02102 1 840516 5/16" Fluted Dowel Pins 50



840014 shown

FLAT HEAD PLUGS

● Premium Flat Head Screw hole Plugs have a tapered tenon to insure a tight fit

● Designed to form a flush finish in furniture and other woodworking applications

● Paint or stain for a perfect wood-color match or for accentuated contrast

UPC NO.

DESCRIPTION

02109 0 313038 3/8" Flat Head Plugs, Oak

QTY.

50

02110 6 313012 1/2" Flat Head Plugs, Oak 50

02113 7 315516 5/16" Flat Head Plugs, Hardwood 50



313038

313012

315516

315038

315012

313038 shown

BUTTON HEAD PLUGS

Button Head plugs are ideal for filling in those unsightly screw holes and can be installed easily with wood glue. Button head plugs can be used for a variety of craft, wood working and furniture projects.

● When fully-seated, the domed, button head protrudes above the wood surface and over the screw hole edge adding a more decorative look

● Slightly tapered plug body to ensure a tight secure fit

● Wood grain runs in the direction of the plug width for best match


UPC NO.


02105 2

311038

3/8" Button Plugs, Oak

02106 9

311012

1/2" Button Plugs, Oak

50

50

02107 6

312038

3/8" Button Plugs, Hardwood 50

02108 3

312012

1/2" Button Plugs, Hardwood 50

311038

311012

312038

312012

311038 shown

16



Wood Joinery

The important characteristics of wood joints are strength, flexibility, toughness and appearance. Both exterior and interior temperature changes can cause major shifts in the moisture content of wood and can compromise the strength and longevity of a joint.

General’s wood based joining products have been developed to provide strong joints that adjust to every day environmental changes.

ROUND HEAD PLUGS

● Premium Round Head Screw hole Plugs with tapered tenon to insure tight fit

● Designed to form a slightly raised round finish in woodworking applications


UPC NO.


02112 0 314038 3/8" Round Head Plugs, Oak 50

02116 8 316038 3/8" Round Head Plugs, Hardwood 50

02117 5 316012 1/2" Round Head Plugs, Hardwood 40

314038

316038

316012

314038 shown

SHAKER PEGS

Made from solid hardwood, General’s Classic

Shaker pegs can be useful throughout the entire house. Install them in the foyer or mud-room, kitchen, bathroom, child’s room etc. Hang your favorite coffee mugs, towels, hats, neck ties, toys and even herbs!

● Create customized pegboards to better organize your work and living spaces

● Use General’s Shaker pegs to replace damaged pegs in your pegboards


UPC NO.

02118 2

317000

DESCRIPTION

Shaker Pegs

QTY.

2

3-1/2"

Shown Actual Size

BISCUITS

Wood Biscuits, sometimes referred to as Wood

Plates or Wafers, are used for edge or cornerjointing. When General’s biscuits come into contact with water based glue they swell, thus creating a ‘locked’ joint for a strong secure fit.

• Used for Wood Joinery with Biscuit Joiners

• Great for furniture, cabinets and trim

• Biscuits soak up water-based glue for a tighter wood joint

UPC NO.

02134 2

02135 9

02136 6

02133 5

DESCRIPTION

318000

Size #0

318010

Size #10

318020

Size #20

318050

Size FF

QTY.

50

50

50

50

317000

318000


17

06

5B

11

04

WOOD WORKING TOOLS

Circle Cutters

General’s Circle Cutters produce precision circles in sheet metal, brass, copper, soft steel, aluminum, plastic, wood and composition materials. Bodies are constructed of heat treated tool steel for durability.

The replaceable cutter blades are made of highspeed steel for precise and clean cuts. Circle Cutters are adjustable for cutting various diameter holes.

A hex wrench is included for adjustments.

4" MAX CIRCLE CUTTER

• Round shank circle cutter

• Replaceable high-speed steel cutting blade and replaceable 1/4" pilot drill

• All adjustments are made with a hex wrench which is included

• Maximum safe speed is 500 RPM

• For use with drill press only

UPC

21003 6

27006 1

27003 0

NO. DESCRIPTION

04

4

4/5

4" Circle Cutter

Replacement Drill

Replacement Blade

• Capacity:

7/8" to 4"

• Shank:

3/8" Round

55

18


WHEEL AND CIRCLE CUTTER

• General’s Wheel and Circle Cutter is the only one that cuts the exact diameter you need anywhere from 1" to 6" (26 to 152mm)

• Ideal for woodworkers, model builders, clockmakers, and hobbyists

• Produces precision circles and holes in sheet metal, brass, copper, aluminum, plastic, wood, and composition materials

• Change from circle to wheel cutting by simply reversing the double ended blade

• Sturdy round shank for use in any drill press or drill stand with 3/8" chuck

• Replaceable double ended 9/32" cutter blade is made of high-speed steel for precise clean cuts




UPC

21010 4

21014 2

21013 5

NO.

06

5/6/55

6

• Capacity: 1" to 6"

• Shank: 3/8" Round

DESCRIPTION

Circle Cutter

Replacement Drill

Replacement Wheel

6" MAX CIRCLE CUTTER

• Has been a General Tools customer favorite for more than 30 years

• Adjusts from 1" to 6" (26 to 152mm) diameter circles

• Replaceable high-speed steel blade and replaceable 1/4" pilot drill




UPC

21009 8

21014 2

27003 0

NO. DESCRIPTION

5B

Circle Cutter

5/6/55

4/5

Replacement Drill

Replacement Blade

• Capacity: 1" to 6"


HEAVY-DUTY CIRCLE CUTTER

• General’s industrial quality cutter is most preferred by professionals

• 1/2" round shank for drill press use

• Replaceable high-speed tool steel blade and replaceable 1/4" pilot drill

• Markings on beam for easy measurement




UPC

21012 8

21014 2

27015 3

NO. DESCRIPTION

55

5/6/55

55

Circle Cutter

Replacement Drill

Replacement Blade

• Capacity: 1-3/4" to 7-7/8"


WASHER AND GASKET CUTTER

• This tool cuts washers and gaskets in leather, rubber, cork, graphite, fiber, copper and other soft materials

• Combination round and square shank permits use with bit brace or hand drill

• Made of steel with graduated beam to adjust to diameters from 5/8" to 6-1/2"

(16 to 165mm)

• Replaceable tool steel Cutter Blades

No. 11B

• Two independently adjustable cutter blades cut inside and outside diameters simultan eously


• For hand held variable speed drills only

UPC NO.

21024 1

27024 5

11

11B

DESCRIPTION

Replacement blades (Pair)

• Capacity: 5/8" to 6-1/2" (16 to 165mm)


Countersinks, Drill Bits, Gages

Pilot Bits, countersink and counterbore precision screw holes in a single operation. Self-Centering

Hinge Bits drill highly accurate pilot holes in cabinet and door hinges.

Stair gages assure fast and uniform layout in repetitive work including angle cuts on rafters and stair stringers.

B C

• The rose pattern cutting flutes assure chatter free countersinking on steel, brass, aluminum, plastic, wood & other materials

• Made of high-speed steel with five flutes

• 82° point angle

• Stepped shank for use with 1/4" and 3/8" chucks

UPC NO.

23047 8

195-1/2

23053 9

23050 8

195-5/8

195-3/4

"

A

NO. A B C

195-1/2

195-5/8

1/2" 3/8" 1/4"

195-3/4

195-1/2

195-5/8

195-3/4

SELF-CENTERING HINGE BITS

• Highly accurate bits are used for drilling pilot holes in cabinet and door hinges, door butts and all large and small hardware

• Spring loaded outer guide keeps the high speed

UPC NO.

DRILL SIZE DRILL DEPTH

22154 4

22149 0

22150 6

291

292

293

5/64"

7/64"

9/64"

1/8"

7/32"

5/16" drill centered for perfect pilot holes

• Adjustable drill depth

SCREW SIZE

3 & 4 screw size

5 & 6 screw size

8 & 10 screw size

JIFFY CENTERING PUNCH

• For quickly starting screw holes when attaching countersunk hardware such as hinges, hasps, hangers and drawer pulls

• Countersunk end ensures starting hole is centered in hardware screw hole

• Hardened steel pin

• Length:

2-1/2" (68mm)

• Body diameter: 3/8" (10mm)

UPC NO.

24018 7

806

ADJUSTABLE PILOT BITS

Drill, countersink and counter-bore precision screw holes in a single operation with General’s

Adjustable Pilot Bit Set. Featuring four high-speed bits with adjustable lengths, this set can be a great time saver for fine carpentry and woodworking. The 1/4” hex shank allows the set to be used in both electric drills and power screwdrivers.

• Drill, countersink and counterbore precision screw holes in a single operation when doing fine carpentry and woodworking

• Hardened high-speed pilot bits give long life

• Black oxide finish deters rust

• 1/4" hex shanks prevents slippage in electric drills and can be used in power screwdrivers

• Adjustable drill and high performance angle on countersink

UPC

23041 6

NO. SCREW SIZES

34ST

Set of 4 Pilot Bits

(Sizes 5 – 14)

291

292

293

806

34ST

STAIR GAGE SET

• Brass plated steel stair gage assures fast and uniform layout in repetitive work including angle cuts on rafters and stair stringers

• Attaches easily to all metal rafter squares

• Set of 2 pieces

UPC NO.

24009 5

803

803


19


Digital Layout Tools

General has a full range of specialized digital tools designed for measurement operations necessary in construction jobs, cabinet making and fine

THE

1st

OF ITS KIND!

carpentry. Woodworkers trust the quality, accuracy and value that General Tools gives them. It’s your job

. . . General Tools make it easier.

DIGITAL SLIDING T-BEVEL

• 2 Tools in 1 - Digital Sliding T-Bevel and

Protractor

• Large digital angle readout

• Holds measurement for transfers

• Reverse Display button, Flip Display button,

Locking Knob for manual measurement transfer

• 4 function control buttons

• Auto Shut off feature

• 8" Stainless Steel blade

• Impact resistant ABS handle

• Full LCD Display

• Measures and transfers angles

• Range: 0-360°

• Resolution: .05°

• Accuracy: 0.3°

• Voltage: DC 2.5V-3.2V

• Power Source:

1 “CR2032” 3V Lithium battery (included)

UPC NO.

08280 7

828

828

Patent Pending

1702

Patent Pending

822

20


823

DIGITAL PRECISION PROTRACTOR

The Digital Protractor displays absolute and relative angle measurements in a large, easy-to-read LCD window

• Installing crown molding, cabinetry, counters, staircases, roofs, windows or flooring

• Takes the guesswork out of measuring, marking, reading and transferring angles

• 6" (150mm) stainless steel protractor arm with knurled locking nut

• Large, easy-to-read display

• Absolute and relative measurements

• Range: 0 to 180° • Resolution: 0.05° • Accuracy: 0.1°

• Display can be inverted for easy reading

• Measurement hold function

• Power Source: 1 “CR2023” (3.0V) battery (included)

UPC NO.

26008 6

1702

5" AND 10" DIGITAL ANGLE FINDER RULES

● Digital stainless steel angle rules make precise measurements for easy woodworking

● Calculates interior (inside) and exterior (outside) angles easily and accurately in seconds

● Lock and reverse angle features: for all types of work

● Large easy to read LCD display

● Hinge mechanism allows a full 360 degrees to measure inside/outside and reverse angles

● Can be zeroed at any point in the swing

• Overall Length for 822: 7" Width: 1-3/8" Depth: 6/8"

• Overall Length for 823: 10-7/8" Width 1-3/8" Depth: 6/8"

UPC No.

00822 7

822

5" Digital Angle Finder

00823 4

823

10" Digital Angle Finder

General’s newest “Fraction

+

” Caliper has a three mode digital display. Measuring in inches, metric and fractions it offers everything for the hobbyist to the professional.


Calipers & Squares

The Combination Squares are specifically designed for carpenters, the woodworking trade, the do-it-yourselfer and home mechanics. A necessary tool for every carpenter and home workshop.

DIGITAL FRACTIONAL CALIPERS

• No. 147, No. 1478, No. 14712 are heavy-duty stainless steel construction

• No. 146, No. 1433 are constructed of non-marring carbon fiber

• Convenient auto-off feature

• Three mode digital display: Decimal Inches,

Fractional and Metric

• Inside, outside, depth & step measurements

• Accuracy: +/- 0.001" +/- 0.02mm

• Resolution: 0.0005", 0.01mm, 1/64"

• Power Source: 1 “SR44” battery (included)

UPC NO. RANGE

01433 7

1433

0 - 3" (0 - 76mm)

01460 3

146

0 - 6" (0 - 153mm)

01470 2

147

0 - 6" (0 - 153mm)

01478 3

1478

0 - 8" (0 - 203mm)

14712 7 14712 0 - 12" (0 - 305mm)

PROFESSIONAL CARPENTER’S

COMBINATION SQUARE

• Specially designed for carpenters and the woodworking trades

• Machined and enameled cast iron head has precision level and scriber for producing right and 45° angles

• 12" x 1" (305 x 26mm) steel blade is graduated in 8ths, 16ths, and 32nds

• Conforms to government specifications:

GGG-S-656C

FRONT

GRADS

UPC NO.

24036 1

812

22193 3

812-CA

Clamp Assembly

BACK

8ths, 16ths 16ths, 32nds

UTILITY COMBINATION SQUARE

• Economy version of the carpenter’s combination square is perfect for the do-it-yourselfer and home mechanic

• 12" x 1" (305 x 26mm) steel blade is graduated in 8ths, 16ths, and 32nds

• Heavy zinc cast head with level and scriber

UPC NO.

24030 9

811

GRADS

FRONT BACK

8ths, 16ths 16ths, 32nds

SINGLE BAR MARKING GAGE

• 6" (153mm) adjustable bar is nickel plated steel graduated in 16ths

• Die-cast head

• Fine needle point for precision marking

UPC NO.

24050 7

820

147

The 146 & 1433 Digital Display

45°

45°

The 147, 1478 & 14712

Fractional Display

90°

90°

812

811

820


21

833


Layout Tools

General’s Contour Gages can duplicate any shape.

The pins on our gage slide to conform to irregular surfaces. This tool can be used for pattern and mold making, duplicating parts and contours.

Great for fitting carpet, floor tiles and linoleum against door casings and pipes. The ANGLE-IZER

™ can replace the need for making templates and can be used again and again. The Ultimate Template Tool.

10" CONTOUR GAGE

• Extra length is ideal for woodworking, linoleum installation, ceramic tile installation or any job where contour duplication is essential

• Gage will fit profiles up to 10" long

• Inch/mm graduations on body

• 3" (76mm) deep fingers will measure profiles up to 1-1/4" (32mm)

• Made from tough, durable plastic

UPC NO.

08330 2

833

6" CONTOUR GAGE

• Ideal for woodworking, linoleum installation, or any job or hobby where contour duplication is essential

• Inch graduation on body

• Stainless steel pins

• Component parts are enamel painted and brass plated

• Size is 6" x 3-1/2" (152 x 89mm) with an overall travel of 5-1/4" (133mm)

UPC NO.

24116 0

837

837

THE ANGLE-IZER ™

• The unique and versatile ANGLE-IZER ™

The Ultimate Template Tool eliminates the need for making templates and can be used again and again. Instructional CD included.

• The ANGLE-IZER ™ can be set-up in seconds not only improving quality but saving time

• Just form the tool into the shape of your work area, then use it to mark your work-piece to be cut

• Repeat accurate marking for creating bulls eyes, arches, repetitive angles or shapes

• Tool can be set to mark bricks, tiles, lumber and laminates

• All the arms are dual-calibrated in inches and metric measures

• Unique tightening mechanism for onehanded operations

• Fiberglass filled nylon for added strength and flexibility

UPC NO.

08360 9

836

836

Patent No. Des. 402,217

22


REPETITIVE MARKING MARKING LUMBER ANGLES FOR PAVER

BRICKS

TILING SPACING AND GAUGING

General’s Compasses and Layout Tools are designed for the specialized operations of measuring and layout necessary in construction


Layout Tools

jobs, cabinet-making and fine carpentry.

Woodworkers trust the quality and the value that General Tools provides.

HOBBY DRILL GAGE

• Heavy gage stainless steel gage conveniently identifies drill bit sizes

• Etched graduations are filled in black to give high contrast and will not wear off

• Gage measures 2-3/8" x 6-3/4"

(60 x 172mm) overall

• Stainless steel will not rust

UPC No.

SPECIFICATIONS:

22011 0

24

Fractional size drills

1/16" to 1/2" x 64ths

OUTSIDE, INSIDE & SLOPED

ANGLE PROTRACTOR

• Use this protractor/angle finder to measure and mark the degrees of an angle on outside, inside and sloped angles

• Fine black graduations from 0° to 165° in opposite directions

• Brass lock nut

UPC NO.

22148 3

29

PROFESSIONAL QUALITY T-BEVEL

• Our T-bevel is the tool preferred by the craftsperson who wants the finest quality tools

• Solid mahogany 5-1/2" (140mm) handle with brass trim and locking wing nut

• 10" (254mm) blade

• Conforms to government specifications: GGG-B-211b

UPC NO.

24100 9

829

PENCIL COMPASS AND SCRIBER

• Designed for marking contours and circles

• Positive wing nut adjustment

• Full-length hardened steel pin in metal frame for greater rigidity

• Constructed of brass plated steel

UPC NO.

24132 0

843/1

CAPACITY

8" (203mm)

843/1

PRECISION PENCIL COMPASS

• Carpenter quality compass is made of long lasting die-cast rust proof metal

• Spring tension adjustment for marking up to 9" (229mm) diameters

• Scribe guide for edge marking

• For use with pencil (included) or slim ballpoint pen

UPC

24126 9

NO. CAPACITY

842

9" (229mm)

3-1/2"

829

29

6"

24

842


23

520

523

524


Trammels

General’s Adjustable Trammels accurately measure and mark distances that are too great for conven tional compasses and dividers. Trammels will accurately transfer measurements, scribe arcs and lay out circles. Points can be replaced with pencils, ballpoint pens, crayons or soap-stone sticks for marking various materials.

PRECISION ADJUSTABLE TRAMMELS

• Draw large circles and measure sizable distances with the accuracy of a divider

• Fine adjusting screw sets points accurately

• Points are removable and may be replaced with the pencil holder

• Die-cast bodies with hardened and ground

3" (76mm) needlepoint legs

• Clamp opening for beam is 3/8" x 3/4"

(10 x 19mm)

• Conform to government specifications:

GGG-T-661b

UPC NO.

23090 4

520

31104 7 84P Replacement points (12 per pkg.)

PROFILE VIEW

ADJUSTABLE TRAMMELS

• General’s adjustable trammels accurately measure and mark distances that are too great for conventional compasses and dividers

• For layouts, marking templates, and drawing large circles

• 6" (153mm) eccentric points provide fine adjustments

• Points can be replaced with pencils, ballpoints pens, crayons, or soapstone sticks for marking various materials

• Clamps onto beam 5/8" to 1-1/2"

(16 to 38mm) thick of any length

UPC

23093 5

NO.

523

PROFILE VIEW

PRECISION TRAMMEL SET

• Will accurately transfer measurements, scribe arcs, and lay out circles too large for conventional compasses

• Will fit any scale, 1/2" to 1-1/8" (13 to 29mm) wide

• Two scriber points and two pencil points included

• Up to four points can be stored in body

• Free-wheeling thimble for greater precision

• Aluminum knurled body

• Steel collet holds replacement leads, scribers and crayons

• Points reverse into body for safety

• Ruler not included in set

UPC NO.

23095 9

524

PROFILE VIEW

24


General’s Scratch Awl is made from the finest materials for long life. This tool is designed for scribing and layout work, starting screw holes and piercing soft materials.


Accessories

The Chisel/Plane Blade Sharpener keeps blades razor sharp. The graduated settings maintain the correct

30° cutting angle necessary for these blades.

“ORIGINAL” DRILL GRINDING ATTACHMENT

•

Engineered to permit sharpening of drill bits to factory accuracy

•

Extends the life of drill bits

•

Angle adjustments lock in to grind drill bits for more accurate drilling in a variety of materials

•

Automatically adjusts to give correct clearance angle

•

For use with ANSI, OSHA, and UL approved standard electric bench grinders or surface grinders

•

Equally at home in machine shop and home workshop

•

Instructions included

UPC NO.

24070 5

825

CAPACITY

Fractional drills 1/8" to 3/4", Number size drills 30 to 1

Letter size drills A to Z, Millimeter size drills 3.0 to 19.0

HARDWOOD HANDLE SCRATCH AWL

• Alloy steel blade runs through the handle and is securely

fastened to both the plated steel ferrule and the cap

• Hardwood fluted handle is contoured for comfortable grip

UPC NO.

A B

24047 7

818

6-1/2" (165mm) 3-3/4" (95mm)

825

818

B

CHISEL/PLANE BLADE SHARPENER

• Keeps chisel and plane blades razor sharp

• Graduated settings maintain correct 30° cutting angle on chisel or plane blade

• Spring clamp locks in blades up to 2-5/8" (67mm) wide

• Made of high impact fiberglass reinforced Lexan ®

• Folds for storage

UPC

24024 8

NO.

809

FIBERGLASS FOLDING RULE

• Constructed of tough, flexible high-impact plastic, with fiberglass reinforcement for added durability

• 72" (1929mm) folding ruler with a 6" (152mm) extension for accurate inside measurements

UPC NO.

GRADS

25300 2

7200

Outside readings 16ths graduated in 16ths.

A

809

7200


25


Professional Moisture Meters

Whether you’re a professional contractor or a conscientious homeowner, General’s ultra-sensitive hand-held pin or pinless Moisture Meters help you to easily detect hidden leaks in wood, concrete, plaster and carpet. Available as

RoHS

MM1E

both analog and digital models, the Meters provide accurate moisture level readings and are great for new home inspections, locating roof leaks or even selecting dry lumber at the yard.

PIN-TYPE LED BAR GRAPH MOISTURE METER

Ideal for use in woodworking, building construction and home inspection. Examples include:

• Checking for moisture in carpets and sub-flooring

• Checking wood, drywall and concrete before painting/wallpapering, sealing or treating

• Locating water leaks in roofs, floors and walls

• Selecting dry lumber

FEATURES:

• 10-LED display

• Two measurement ranges:

7 to 15% and 16 to 35%

• Protective cap doubles as calibration checker

• Full and low battery indications

• CE and RoHS approved

SPECIFICATIONS:

♦

Low Measurement Range: 7 to 15% WME

(Wood Moisture Equivalent)

♦

♦

♦

High Measurement Range: 16 to 35% WME

Measurement Accuracy: ±1 LED (~1%)

Dimensions:

6.5 x 2.7 x 1 in. (164 x 69 x 26mm)

♦

♦

Weight: 3.2 oz. (91g) w/out battery

Power Source: 1 “9V” battery (included)

Includes: • Protective Cap

• Battery

• User’s Manual

• 1-Year Limited Warrantyl

UPC NO.

10188 9

MM1E

PIN-TYPE LCD MOISTURE METER

Ideal for use in woodworking, building construction, home inspection, lumber selection, water-damage restoration.

FEATURES:

• 99.9 count LCD w/0.4 in. high digits

• Wood/building materials selection switch

• Low, Medium and High moisture tones and on-screen icons

• Data hold + auto power off + low battery indicator

• Replaceable stainless steel pins (#PIND4E)

• Auto power off

SPECIFICATIONS:

♦

Overall Moisture Measurement Range: 5 to 50% for wood, 1.5 to 33% for building materials

♦

Wood Moisture Scales: 5 to 11.9% (low);

12 to 15.9% (medium); 16 to 50% (high)

♦

Building Materials Scales: 1.5 to 16.9% (low);

17 to 19.9% (medium); 20 to 33% (high)

♦

♦

♦

♦

Measurement Accuracy: ±3% of reading

Measurement Resolution: 0.1%

Dimensions: 6.0 x 2.6 x 0.8 in. (152 x 66 x 20 mm)


Includes: • Protective cap

• Battery • User’s manual

• 1-Year Limited Warranty

UPC NO.

41447 7

MMD4E

01499 8 PIND4E Replacement pins

MMD4E

RoHS

MMD5NP

26


PINLESS LCD MOISTURE METER

Ideal for measuring moisture content of wood and other construction materials.

FEATURES:

• Non-invasive measurement technique

• Jumbo display

• Wide measurement range

• Intuitive on-screen icons: Low/Medium/High moisture content; wood/concrete mode

• Data hold

• Audible peak reading alert

• Auto Power Off

• Low and very low battery warnings

SPECIFICATIONS:

♦

Measurement Ranges: 0 to 99.9% WME (Wood

Moisture Equivalent) for wood; 0 to 56.5% for building materials

♦

♦

♦

Measurement Accuracy / Resolution: ±3% / 0.1%

Measuring Depth: 3/4 in. (20mm)

Display Type/Size: 99.9 count LCD with 0.4 in.

(10mm) high digits

♦

Operating Temperature:

32° to 122°F (0° to 50°C) @ <80%RH

♦

Dimensions: 5.75 x 2.6 x 0.75 in.

(146 x 66 x 19 mm)

♦


Includes: • Battery • User’s Manual


UPC NO.

40142 2

MMD5NP


Professional Moisture Meters

PINLESS LCD MOISTURE METER W/TRICOLOR BAR GRAPH

Ideal for measuring moisture content of wood and other construction materials.

FEATURES:

• Separate settings for drywall, masonry, softwood and hardwood

• 2 in. backlit LCD + 3-color LED bar graph

• Non-invasive technology with

3/4 in. maximum sensing depth

• ±4% accuracy on wood

• Auto calibrating

• Data hold

• Separate out-of-range alarms for wood and building materials

• Auto power off

SPECIFICATIONS:

♦

Measurement Ranges: 0 to 53% for softwood;

0 to 35% for hardwood

♦

♦

♦

♦

♦

Measurement Accuracy / Resolution: ±4% / 1%

Maximum Sensing Depth: 3/4 in.

Dimensions: 6.7 x 2.9 x 1.2 in.

Weight: 5.4 oz. (152g) without battery


Includes: • Battery

• User’s Manual


UPC NO.

01583 4

MMD7NP

RoHS

MMD7NP

PRECISION MULTI-SPECIES WOOD MOISTURE METER

Ideal for measuring the moisture content of wood before painting, wallpapering, sealing, treating or joining.

FEATURES:

• Readings are species-specific, derived from industry-standard moisture-resistance curves for 48 popular species of wood

• Joystick makes species selection fast and easy

• Also measures and displays ambient temperature (in °F or °C) and RH

• Measurements can be compensated for ambient temperature, improving precision

• Super-bright yellow OLED (organic lightemitting diode) dot matrix display

• 99 record memory with manual or automatic

(time-based) recording

• Multiple display options, including analog bar graph

• Measurement hold button

• Audible moisture alarm

• Pin cover doubles as calibration checker

• Replaceable pins

SPECIFICATIONS:

♦

Moisture Measurement:

• Range: 5.3 to 40%WME (Wood Moisture

Equivalent)

• Accuracy / Resolution: ±(3% of reading

+5 digits)/0.1%

♦

Ambient Temperature Range / Accuracy:

• 0° to 176°F (-18° to 80°C)

• ±1.8°F (1°C) / 0.1°

♦

RH Range / Accuracy / Resolution:

• 20 to 95%RH

• ±5% typical / 1%

♦

Temperature Compensation Range / Resolution:

0° to 255°F (-18° to 124°C) / 5°F

♦

Display Type: Yellow OLED in 128 x 64 dot matrix format

♦

♦

♦

Display Size: 1.54 in. (39mm) diagonal

Pin Length: 0.2 in. (5mm)

Power Source: (1) “9V” battery (included)

Includes: • Battery

• User’s Manual


UPC NO.

01638 1

MMD8P

MMD8P

PIN-TYPE LCD MOISTURE METER W/BAR GRAPH

Ideal for measuring moisture content of wood, timber and concrete.

FEATURES:

• Two displays: Red LED bar graph and LCD display with 0.62 in. (51mm) high digits

• Optional remote probe available

• Replaceable 0.44 in. (11mm) long pins

• Min/Max memory + data hold

• Heavy-duty housing

• Low battery indicator

SPECIFICATIONS:

♦

Two measurement ranges: 0 to 100% for concrete and non-wood materials, 6 to 40% moisture for wood

♦

Measurement Accuracy / Resolution:

± (5% of reading + digits)/0.1%

♦

Dimensions:

8.4 x 2.7 1.2 in. (216.5 x 68.5 x 29.7mm)

♦

♦

Weight: 8.8 oz. (251g)

Power Source: 1 “9V” battery (not included)

Includes: • 10 Pairs of Extra Pins

• Protective Cover

• User’s Manual


UPC NO.

07003 1

MMD7003

01255 0 MP7003 External Pin-Type Probe (optional)

MMD7003


27

GENERAL TOOLS & INSTRUMENTS

80 White Street, New York, NY 10013-3567

PHONE (212) 431-6100 • FAX (212) 431-6499 • TOLL FREE (800) 697-8665 e-mail: [email protected]

www.generaltools.com

Catalog No. WWJ14 Printed in USA 09/14

©2014 GENERAL TOOLS & INSTRUMENTS

Not responsible for typographical errors.


GeneralToolsNYC

General Tools 840038 1.5 in. x 3/8 in. Fluted Dowel Pins Installation Guide

Wood Joining &

Woodworking Tools

Precision, Specialty and Innovation . . . Since 1922

This is the cutting-edge

Face Frame Jig System

Clamp, drill and fasten in one simple set-up!

Now available through Woodcraft Supply:

woodcraft.com/generaltools

Crown King

Crown Molding Jig helps you make seamless, perfectly mitered interior and exterior corner joints.

The E•Z

Pro

Mortise & Tenon Jig lets you make perfectly matched mortise & tenon joints with one jig.

The E•Z

Pro

Dovetail Jig lets you make dovetail and box joints — through or half-blind.

The E•Z

Pro

Pocket Hole Jig has everything you need to make ﬂ ush, corner and angle pocket hole joints.

The E•Z

Pro

Doweling Jig lets you make perfectly aligned dowel joints every time.

Face Frame Jig

FIRST OF ITS KIND:

Clamp, Drill and Fasten In One Simple Set-Up

PROFESSIONAL FACE FRAME

Assemble professional

SINGLE JIG SYSTEM

quality face frames and cabinet doors using General’s

patented

Face Frame

Jig System

Accommodates Stock from 1-1/4" to 2-1/2" Wide

Pocket Hole Spacing Adjustment 3/4" to 1-1/2"

Stock Thickness Adjustment 3/4" to 1"

Includes Step Drill with Locking Collar and Face Frame Fasteners

Patent # US 6,394, 712 B1

Crown Molding Jig

A Cutting Guide For Crown Moldings

Professionally Cut Perfectly Mitered Interior and Exterior

Corner Joints – in the same alignment as they are installed on the wall

CEILING

WALL

Create the Crown in Four Easy Steps

Eliminates:

Difficult angle calculations

Coping of joints

Compound-angle cutting

Auxiliary fences

Confusing upside-down miter box positioning

No. 881

See CROWN KING in action!

Mortise & Tenon Jig

● Create professional matching Mortise & Tenon Joints

Right Out of the Box

● The first of its kind,

all-in-one precision machined Mortise &

Tenon Jig

● Produce 1/4", 3/8" and

1/2" Mortise and Tenons

● Includes: 1/4" high-speed

steel spiral upcut router bit and User’s Manual

No. 870

Dovetail Jig

“The Easy Way to Make

Professional Furniture Joints”

DOVETAIL JIG

With the E•Z Pro

Dovetailer

II and your router, you can cut

Professional Dovetail Joints, Simply and Accurately . . .

Right Out Of The Box!

No. 861

Pocket Hole Jig

Pocket Hole Jig Kits

• Ideal for leg-and-rail connections, cabinet construction, sneaking screws into tight-squeeze spots or fastening picture frame miters

• Heavy-duty aluminum extrusion and hardened steel bushings

• By drilling steeply pitched counterbores in one joint member, you can drive self-tapping screws into the other joint member without pilot holes

• Built to be portable or bench mounted

**This is the cutting-edge**