YIYIBYUS HG-ZYLGJ Pendant Light Brass Cage Chandelier Instructions / Assembly

Instructions Assembly

1. To ensure accurate installation, first measure the distance between the two points of the grid with a ruler.

2. Position with a spirit level and mark on the wall with a pencil.

3. Compare the size measured in the first step, find the correct point on the wall, and mark the punching position.

4. Use an impact drill to make holes in the marked place, pay attention to use a No. 6 drill bit.

5. Use a hammer to knock the plastic expansion tube into the punched hole.

6. Use a screwdriver to screw the screw to the expansion tube.

7. Leave the screw head about 5mm(0.19 in.) for hanging the product.

8. After hanging the grid, gently pull the small end to fix the grid, and the installation is complete.

As shown below