ZQ610 Plus

ZQ620 Plus

Quick Start Guide

1

Installing the Printer Driver

IMPORTANT

Go to

zebra.com/zq600plus-info

and install the driver for your printer.

2

Unpacking the Printer

3

Removing the Protective Film

ZQ620 Plus

.

P1131107-01EN

Zebra Technologies | 3 Overlook Point | Lincolnshire, IL 60069 USA zebra.com

ZEBRA and the stylized Zebra head are trademarks of Zebra

Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. © 202 3

Zebra Technologies Corp. and/or its affiliates. All rights reserved.

4

Removing the Battery

zebra.com/zq600plus-info

The driver MUST be installed before connecting the printer to the computer, or it will cause complications. If your Microsoft Windows-based computer does not have the driver installed for this printer, download it from zebra.com/zq600plus-info and install it before continuing.

3.

Pull up on the tape insulator tab located on the bottom of the battery pack.

Save the box and packaging materials in case you need to store or ship your printer in the future.

Verify that you have the items shown. Accessories may vary by region.

5

Charging the Battery

To provide power to the printer, you can either charge the battery using a compatible charger, or use an AC power adapter.

The X s in the part numbers will vary by region.

BTRY-MPP-34MA1-01

3-Slot Battery Charger

Dual 3-Slot Battery Charger

SAC-MPP-3BCHG XX 1-01

SAC-MPP-6BCH XX 1-01

4.

Peel back the tape insulator and remove it from the top of the battery pack. Discard upon removal.

Quad Battery Charger

AC18177X

1. Press the release tab on the battery pack.

2. Rotate and lift the battery pack out of the printer.

1-Slot Battery Charger

SAC-MPP-1BCHG XX 1-01

Smart Charger-2

P1031365XXX

AC Power Adapter

P1031365-0 XX

P1065668-0 XX

6

Installing Media

7

Power Up and Paper Feed

1.

Press and hold POWER for at least 3 seconds, then release to power up the printer.

1.

Press down on the latch release to open the media cover.

3.

Close the media cover making sure to manually feed the end of the media roll outside the printer.

2.

Insert the media roll in the media compartment in the orientation shown.

8

Pairing a Mobile Device

1.

Configure the ZQ6 Plus printers using the Zebra Printer

Setup Utility app. Download the app from the Google

Play™ store for Android™ devices, or from the App

Store ® for iOS ® devices.

Zebra Printer Setup Utility

GET IT ON

4.

The media cover will click into place.

2.

Use NFC and Bluetooth to pair a device. For ease of pairing, the Bluetooth MAC Address is labeled on the back of the printer and on the box via a barcode.

Starting Up...

ZEBRA ZQ620 PLUS

PRINTER READY

V100 . XX . XXZ

2 . 2 . 2 . 2

ZEBRA ZQ620 PLUS

HOME MENU

SETTINGS

Support and Information

View user documentation and how-to videos.

zebra.com/zq600plus-info

Need to design a label?

zebra.com/zebradesigner

Learn about genuine

Zebra supplies.

zebra.com/supplies

Need to manage your printer?

zebra.com/profilemanager

2.

Press FEED to advance the media through the paper path.

View Quick Answers and Knowledge Base.

zebra.com/knowledge

Join Community Connection of Zebra users and ambassadors.

zebra.com/supportcommunity

Contact Zebra about your printer.

zebra.com/contactsupport

Need to secure your printer?

zebra.com/printsecure

Learn about product patent information.

zebra.com/patents