V I V O STAND V012F Dual Monitor Extra Tall Desk Stand Instruction manual
Add to My manuals8 Pages
VIVO Stand is a dual monitor extra tall desk stand that can elevate your monitors to a more ergonomic and comfortable viewing height. It is constructed from high-quality steel and aluminum, making it sturdy and durable. The stand features a variety of adjustment options, including height, tilt, and swivel, so you can customize it to your specific needs. It also comes with integrated cable management to keep your cords organized and out of the way.
advertisement
Dual Monitor Extra Tall Desk Stand
Instruction Manual
SKU: STAND-V012F
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v012f
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST [email protected]
www.vivo-us.com
Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• TO PREVENT TIPPING, PLEASE BE CAREFUL NOT TO EXTEND THE ARMS TOO FAR FORWARD
OR BACKWARD.
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x1)
Bottom Pole
B (x1)
Middle Pole
C (x1)
Top Pole
D (x1)
Base
E (x1)
Arm
F (x2)
VESA Plate
G (x3)
Pole Cable Clip
H (x4)
Arm Cable Clip
S-A (x3)
M5x14mm Screw
S-B (x2)
Security Nut
M-A (x8)
M4x12mm
Thumbscrew
M-B (x8)
M4x30mm Screw
M-C (x8)
M4 Spacer
2
T-A (x1)
3mm Allen Wrench
T-B (x1)
5mm Allen Wrench
T-C (x1)
6mm Allen Wrench
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
22 lbs
(10 kg)
PER ARM
Phillips
Screwdriver
ASSEMBLY STEPS
STEP 1
Thread Bottom Pole (A) , Middle Pole (B) , and Top Pole (C) together as shown below.
C
B
A
STEP 2
Assemble Bottom Pole (A) to Base (D) using M5x14mm Screws (S-A) and 3mm Allen Wrench (T-A) .
A
D
T-A
S-A
3
STEP 3
Slide Pole Cable Clips (G) and Arm (E) onto the pole assembly. Secure Arm (E) using 6mm Allen
Wrench (T-C) . Assemble Arm Cable Clips (H) to Arm (E) .
T-C
E
G
H
STEP 4 (Option A)
Flat Back Monitor
Assemble VESA Plates (F) to the monitors using M4x12mm Thumbscrews (M-A) .
NOTE: Hand tighten screws to avoid stripping the plastic screw heads.
F
M-A
4
STEP 4 (Option B)
Curved Back Monitor
Assemble VESA Plates (F) to the monitors using M4 Spacers (M-C) and M4x30mm Screws (M-B) .
Tighten with a Phillips screwdriver.
M-B
F
M-C
STEP 5
Slide VESA Plates (F) with the monitors onto Arm (E) . Secure the monitors in place using Security
Nuts (S-B) .
F
E
S-B
5
STEP 6
Adjust the tilt using 5mm Allen Wrench (T-B) . To level the monitors, remove Security Nut (S-B) and turn the adjustment screw with the 3mm Allen Wrench (T-A) to raise or lower the monitor.
T-B
S-B
T-A
Adjustment
Screw
6
STEP 7
Manage cables using Arm Cable Clips (H) and Pole Cable Clips (G) . Store Allen wrenches in Pole Cable
Clip (G) for future adjustments.
H
G
T-C
T-B
T-A
7
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 03/08/2022
REV2
Open
Monday - Friday 7:00am - 7:00pm
CST, our dedicated support team can offer immediate assistance with rapid response times.
If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
309-278-5303 AVG. RESOLUTION TIME (within office hrs) : 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs) : < 15 M [email protected]
AVG. RESPONSE TIME (within office hrs) : 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
advertisement
Key Features
- Supports two monitors
- Weight capacity of 22 lbs per arm
- Height adjustable
- Tilt adjustable
- Swivel adjustable
- Integrated cable management
- Easy to assemble
Related manuals
Frequently Answers and Questions
What is the weight capacity of the stand?
Is the stand height adjustable?
Can I tilt the monitors?
Does the stand come with cable management?
Is the stand easy to assemble?
advertisement