KFi Motor 35-BL Winch Motor Installation Guide

A-SERIES WINCH MOTOR

INSTALLATION

PART # Motor-35-BL Winch Motor

Kit Components:

Qty. Part Description

1................. Motor

INSTALLATION INSTRUCTIONS:

1. Remove the two bolts that attach the motor, as shown in

Figure 1.

2. Remove Coupler (A) from the old motor, as shown in

Figure 2.

3. Insert the coupler onto the shaft of the new motor.

4. Set the new motor on the winch and reattach using the bolts removed in step 1.

5. Tighten all hardware evenly.

“Figure 1”

A

©2022 Copyright Kappers Fabricating, Inc. All rights reserved

“Figure 2”

Page 1