Anker T8420 eufy Security Floodlight Camera User Guide

Anker T8420 is a versatile floodlight camera that provides enhanced security for your home. With its powerful floodlights, you can illuminate dark areas and deter intruders. The camera's 1080p resolution and night vision capabilities ensure clear and detailed footage, day or night. You can easily access live footage and receive motion alerts through the eufy Security app. Installation is simple and can be done without the need for professional help.

PDF

દસ્તાવેજ

જાહેરાત

Logo are trademarks of Anker Innovations Limited, registered in the United

States and other countries. All other trademarks are the property of their respective owners.

Model: T8420 51005001400 V02 https://manual-hub.com/

Quick Start Guide

eufy Security Floodlight Camera

https://manual-hub.com/

Table of Content

What's in the Box 01

Power On the Floodlight Camera Indoors 02

Get the eufy Security App and Setup the Camera 02

Mount Floodlight Camera Outdoors 04

Safety 10

Customer Service 12

What's in the Box Power On the Floodlight Camera Indoors

1. Connect Floodlight Camera to a power source, and then wait 1 minute or until the LED indicator blinks red.

Floodlight Camera

(T8420)

Power Cord

(Connected to the unit)

Mounting Plate Installation Hook

Central Screw Central Screw Cap Plate Screws

Install Floodlight Camera to the junction box outdoors (you need to have a junction box and wires already installed).

In order to stream video from Floodlight Camera, you need to make sure the Wi-Fi signal strength is strong at the location you want to install Floodlight Camera.

To avoid risk of shock, injury or death, always be cautious when working with electricity. Remember, do hire a professional electrician if you are uncomfortable working with electrical wiring.

Get the eufy Security App and Setup the Camera

Download the eufy Security app from the App Store (iOS devices) or Google

Play (Android devices).

02 https://manual-hub.com/

Mount Floodlight Camera Outdoors

Step 1

Unplug Floodlight Camera.

To avoid risk of shock, injury or death, always be cautious when working with electricity.

Make sure you can livestream video from Floodlight Camera before mounting.

Step 2

Unscrew the power cord; wire nuts will be used later.

The power cord is not required when mounting the Floodlight Camera outdoors.

04 https://manual-hub.com/

Step 3

Shut down the circuit breaker in your house. Switch on/off the lights to make sure the electricity in your house is properly shut off.

Step 5

1. User can hang Floodlight Camera upside down or install it vertically on the wall. Select the installation method that best suits the position of your junction box.

To avoid risk of shock, injury or death, always be cautious when working with electricity.

Step 4

Remove the old Floodlight from the junction box and install the mounting plate to the junction box.

The junction box and existing electrical wires are required to

Floodlight Camera installation.

The concaved side of the mounting plate must face outwards.

Wall Mount

Eave Mount

To avoid risk of shock, injury or death, always be cautious when working with electricity. Remember, do hire a professional electrician if you’re uncomfortable working with electrical wiring.

06 https://manual-hub.com/

If you plan to install the Floodlight Camera on the wall, please skip to Step 6.

2. For upside down installation, turn the camera down to the end when it’s placed vertically, then turn the camera 180° in clockwise direction.

Step 6

1. Hang Floodlight Camera on the junction box with the hook provided.

To avoid risk of shock, injury or death, always be cautious when working with electricity. Remember, do hire a professional electrician if you’re uncomfortable working with electrical wiring.

https://manual-hub.com/

To avoid risk of shock, injury or death, always be cautious when working with electricity. Remember, do hire a professional electrician if you’re uncomfortable working with electrical wiring.

2. Connect both ground wires(yellow or green) from the junction box and

Floodlight Camera, join the wires by using a wire nut.

If the existing ground wire has been connected to the junction box or there's no ground wire, connect the ground wire of the Floodlight Camera to the junction box or mounting plate directly.

1 2

3. Use wire nuts to connect Floodlight Camera wires to the rest of the wires from junction box. Connect the white wire on the Floodlight Camera to the white wire(neutral) from junction box. Connect the black wire on the

Floodlight Camera to the black wire(hot) from junction box.

To avoid risk of shock,injury or death, always be cautious when working with electricity.

Remember, do hire a professional electrician if you’re uncomfortable working with electrical wiring.

To avoid risk of shock, injury or death, always be cautious when working with electricity. Remember, do hire a professional electrician if you’re uncomfortable working with electrical wiring.

10 https://manual-hub.com/

Step 7

Insert the central screw through the center of Floodlight Camera and screw it tightly.

Use the central screw cap to cover the central screw to prevent the central screw from rusting.

Step 8

After installation is complete, you can turn the camera knobs on Floodlight

Camera to adjust the camera to your desired angle.

Step 9

Switch on the main circuit breaker in the house.

To check whether Floodlight Camera is operating, check if the LED indicator has turned solid white.

In case Floodlight Camera is not powered on, switch off the circuit breaker before checking the wiring of Floodlight Camera.

To avoid risk of shock, injury or death, always be cautious when working with electricity. Remember, do hire a professional electrician if you’re uncomfortable working with electrical wiring.

In case Floodlight Camera keeps blinking red, it means the floodlight is not connected to the Internet. Please make sure the

Wi-Fi signal is strong at the desired location. You may consider moving the wireless router closer to Floodlight Camera or using a Wi-Fi range extender.

For troubleshooting, check the Help section in the Eufy

Security app.

Refer to the app page for what the LED indicator status lights mean.

12 https://manual-hub.com/

Safety

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.

The following importer is the responsible party

Company Name: POWER MOBILE LIFE, LLC

Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541

Telephone:1-206-383-8247

This product complies with the radio interference requirements of the European Community.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.For the declaration of conformity, visit the Web site www.eufylife.com

Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The connection to so called power USB is prohibited.

The adapter shall be installed near the equipment and shall be easily accessible.

Do not use the Device in the environment at too high or too low temperature, never expose the Device

13 under strong sunshine or too wet environment.

The suitable temperature for the product and accessories is -20°C-50°C.

When charging, please place the device in an environment that has a normal room temperature and good ventilation.

It is recommended to charge the device in an environment with a temperature that ranges from 5°C~25°C.

Please ensure to use only the charger offered by the manufacturer. Using unauthorized charger may cause danger and violate the authorization of the projecter and the guarantee article.

This charger is for indoor use only

The charger output voltage/current is 5Vdc/2A. The plug considered as disconnect device of adapter.RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body.

CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED

BATTERIES ACCORDING TO THE INSTRUCTIONS

Wi-Fi Operating Frequency Range:2412~2472MHz for EU;

This product is designed and manufactured with high quality materials and components, which can be recycled and reused.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device."

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

(1) l'appareil nedoit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement."

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

IC RF Statement:

When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.

Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer aux exigences en matière d'exposition RF.

FCC ID:2AOKB-T8420 IC:23451-T8420

14 https://manual-hub.com/

Customer Service

• Warranty

12-month limited warranty

• Call Us

United States +1 (800) 988 7973 Mon-Fri 9AM-5PM (PT)

United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)

Germany +49 (0) 69 9579 7960 Mon-Fri 6:00-11:00

• Email Us

Customer Support: [email protected]

15 https://manual-hub.com/

નમસ્તે! હું એક AI ચેટબોટ છું જે ખાસ કરીને Anker T8420 eufy Security Floodlight Camera User Guide સાથે તમને સહાય કરવા માટે તાલીમ પામેલો છે. મેં દસ્તાવેજની સંપૂર્ણ સમીક્ષા કરી છે અને તમને જરૂરી ચોક્કસ માહિતી શોધવામાં અથવા સ્પષ્ટ અને સરળ શબ્દોમાં સામગ્રી સમજાવવામાં મદદ કરી શકું છું. પછી ભલે તમે ચોક્કસ સુવિધાઓ, મુશ્કેલીનિવારણ પગલાં અથવા સામાન્ય વપરાશ વિશે માર્ગદર્શન શોધી રહ્યા હોવ, તમારા પ્રશ્નો પૂછવા માટે નિઃસંકોચ રહો. તમે તમારી ચિંતાઓ અથવા જરૂરિયાતો વિશે જેટલી વધુ વિગતો પ્રદાન કરશો, તેટલી વધુ ચોક્કસ અને અસરકારક રીતે હું તમને સહાય કરી શકું છું!