Ivante S5 User Manual

S5
User Manual
Wireless Stereo Bluetooth Headset
Imported Bluetooth 5.0 Chip
Preface
Thank you for purchasing S5 wireless stereo Bluetooth headset.
HD high definition sound and Bluetooth 5.0 nondestructive
analytical voice signal, reduce the ambient noise effectively on
calls. The headset which makes sound clearer and more stereo ,
enables communication close at hand. This manual will help you
use it. Before use the Bluetooth headset,please know and be
familiar with the Bluetooth function of your cellphone first.
Item Parameters
1. Bluetooth Version: 5.0
2. Work Frequency: 2.40GHz-2.480GHz
3. Call Time: approx 5 hours
4. Music Time: approx 5 hours
5. Bluetooth Profiles: HFP 1.7, HSP 1.2, A2DP 1.3, AVRCP 1.6
How to wear
For the optimal audio experience, it is recommended to try each
of the different Eargel sizes.The fit should feel tight、
comfortable and stable in your ears.Please put your cellphone in
the same side of your left ear during outdoor.The medium Eargels
provide a better bass effect.
Because there is a difference in the ear canal of everyone, please
adjust to fit yourself well.
How to use
Stereo mode
1,How to charge
Put the earbuds into the charging case, the indicator lights are
red during charging.When full-charged,they will be off. The
earbuds can be full-charged after about 50 minutes even if they
are completely out of power. (If the charging case is at low
battery,please charge it first).
During charging the rechargable case,the indicate light will flash blue,once
be full-charged,it turns to solid red.
2： Take out/Put in
Place the earbuds at the rechargeable case and gently put them
in, then automatically in position.Press gently,the earbuds will
go into the case,then the charging starts; Again press gently,
the earbuds will spring out from the charging case.Take out the
earbuds, they will be power on automatically.The indicate light
of the “L” Earbud flashes blue promptly 3 times, then flash red
and blue alternately. After the“R”earbud flashes red and blue
promptly 3 times ,it will turn into flashing red and blue slowly.
At this moment, The L/R earbud is successfully connected back,
and they can be paired
with the cellphone. (the L/R earbuds have
been paired at the factory. Please take them out and pair them
with cellphone directly).
3: How to pair
First connection with cellphone
Take the left and right earbuds from the charging case, turn on
the Bluetooth function on cellphone,search “S5” and tap to
connect it,finish the pairing and start to use.
Subsequent use
Take out the earbuds,they will re-connect to cellphone
automatically at the next time used in stereo mode.(Please make
sure the bluetooth function on your cellphone is open)
Mono mode
The“L”earbud can be used separately.
1:The first time when you use the“L” earbud, take out earbud
or power on earbud and wait for about 20s until the LED indicator
light flashes red and blue. Tap the button,then turn on
“Bluetooth” on cellphone, search and tap “S5”.
2 : If the“L” earbud has been paired with the mobile phone before,
next time when you use it singlely, just need to take out the“L”
earbud, the earbud will connect to cellphone automatically.
3:In stereo mode,if just take out the“L” earbud,it can connect
to the cellphone automatically too.
Note: If want stereo mode again after mono mode(the“L” is used
alone), please delete the pairing.
Deleting pairing: Power off the earbuds,press and hold the buttons
for 15 seconds, ( power on - > pairing - > lights flash red and
blue twice - > continue to hold - > lights flash red and blue
twice again ) delete the pairing on cellphone.
How to charge
1: Charging for the case
Connect the adapter or computer MIC-USB port via USB cable, it
will finish charging in about 60 minutes.
2: Charging case power indicating
When the charging case is in low battery, the light will flash
red; During recharging the charging case, the light flashes
blue.If full-charged,the light will keep in blue. During charging
the earbuds,the light on the charging case is in red,and once be
full-charged,the red light will be off.
3: Earbuds power indicating
When the charging case charges the earbuds,the lights on earbuds
are in red.Once the earbuds are full-charged, The lights will turn
to blue and then be off.
The earbuds working status:the“L”earbud light flashes blue,the
“R”earbud light flashes red and blue at the same time.
Function operation
1: Answer calls
Stereo mode: call state, both ears have voice.
MONO mode: call state, single ear has voice(the“L”earbud can
be used alone).
Calls incoming state: tap once to answer.
Calling state: tap the button once to end the current call.
2: Play music
Pause / play
Tap the button once to pause / play
Volume adjustment
Tap the button twice to adjust the volume (“L” for decreasing,
“R” for increasing).
Skip track forward
During Playing,tap the button three times(“L” for the last music ,
“R” for the next one)
3: Voice Assistant
Press and hold the button for 3S to activate the Siri voice
assistant.
4: Power on/off
Power on: Take out the earbuds from the charging case and power
on in automatic.
Power off: Put the earbuds into the rechargeable case and they
will power off automatically.
Or press and hold the button for 4 seconds, when power off,the
lights are in red.
Accessories list
Accessories Item
Unit
Quantity
Earbud-L
pcs
1
Earbud-R
pcs
1
Charging case
pcs
1
Silicon eargel-medium
pair
1
Silicon eargel-small
pair
1
USB charging cable
pcs
1
User Manual
pcs
1
Fault
Cause
Solutions
Can’t power on
Earbuds are low battery
Charge the Earbuds
Earbud red light flash
Earbuds are low battery
Charge the Earbuds
No charging indication
The Earbuds are not well put into
Adjust Earbuds position
Automatically shut down
Earbuds are low battery
Charge the Earbuds
The Earbuds have an echo
The volume is too high or the environment
Adjust the volume or change
is too noisy
position
The Earbuds are noisy
Outside environment interference
or too
far away from mobile phone
Small sound
Signal Intermittent
Wearing
Earbuds
incorrectly
Change position, or move closer
to the mobile phone
or
the
Adjust the Earbuds position or
volume is too low
the mobile phone volume
Outside environment interference or too
Change to better environment
far away from mobile phone
or move closer to the mobile
phone
Earbuds have no sound
Pairing unsuccessful between L and R
Pair the Earbuds correctly
Earbuds
Warning
1. Do not keep the equipment in too low or too high temperature
for a long time, extreme temperatures can cause equipment to
deform and reduce the battery capacity, also shorten the service
life of the equipment.
2. Don’t use the equipment in heavy rain, thunderstorms may cause
equipment malfunction, and increase the risk of electric shock.
3. Please do not disassemble or modify your earbuds for any reasons,
which may cause earbuds malfunction or burn down, please send the
earbuds to the distributor for repairing.
4. Please put the equipment and accessories in places where
children and pets are not accessible, so as to avoid accidents.