KAMEHA KA073 User Manual

· IMPORTANT SAFETY INSTRUCTIONS
· CONNECTION AND OPERATION
1. Connection
Please read below safety instructions carefully before installation and
operation:
1. Please pay attention to all the warnings and hints on this device.
2. Do not expose this unit to rain, moisture and liquid.
user manual ×1pcs
Wall-mount kit x2pcs
Screws*4pcs
Video wall controller
3. Do not hot plug when it is working.
4. Use DC12V power supply only. Make sure specification
matched if using adapters not supplied by factor y.
· INSTALLATION REQUIREMENTS
1. Source device:
A
HDMI Input
Source device with HDMI output, such as set-top boxes, computers,
· INTRODUCTION
video recorders,etc.
This video wall controller is a perfect solution for 1x2 large video wall,
supports 1xHDMI source input and 2xHDMI outputs to two monitors.
It supports HDCP-compliant HDMI signal source up to full HD
1080p@60Hz. It ’
s ideal for video wall display applications in clubs,
exhibitions, building lobbies and other similar venues.
HDMI output
2. Display device:
Display device with HDMI input, such as television, projector,
HD display,etc.
Audio output
3. Cable:
HDMI cables
2. Connection instruction
1 ) Connect the HDMI output port on the video source device to the
· PANEL DESCRIPTION
· FEATURES
1. With 2 HDMI outputs,divides the input video into two parts
HDMI input port on the video wall controller via HDMI cable.
1. Front panel：
2 ) Connect the audio output port to an audio player through an
and extend to two same size displays.
audio cable.
2. Resolution supported is up to 1080p@60Hz.
3 ) Connect power supplies of all devices, and video wall
3. Support video wall screen mode and clone screen mode.
4. With 3.5mm audio output port, access to audio equipment easily.
5. Wall-mountable design, easy for installation.
6. Switch output modes with mode button.
controller works.
①
① Power indicator
②
② Mode button
3. Display Modes
2. Back panel：
7. Plug and play.
Video Wall Screen Mode
· PACKAGE CONTENTS
Display 1
①
video wall controller
unit ×1pcs
HDMI output
PC
power adapter
（12V2A）×1pcs
3.5mm jack audio
cables ×1pcs
②
③
④
① DC input（DC12V）
③ HDMI signal input
② Audio output
④ HDMI signal outputs
A
Display 2
Left-Right 1×2 Configuration
Clone Screen Mode
Display 1
Display 2
AA
Left-Right 1×2 Configuration
Display 1
Display
Display 22
A
Up-Down 1×2 Configuration
Display 1
Display 2
A
A
Up-Down 1×2 Configuration
· FAQ
· SPECIFICATION
Item
HDMI signal
Description
HDMI1.3, Full compatible with HDCP1.2
Input port
1×HDMI
Output port
2×HDMI
Audio format
PCM
HDMI resolution
480i@60Hz, 480p@60Hz，576i@50Hz，576p@50Hz，
720P@50/60Hz,1080p@50/60Hz
Q: TV displays with black borders around the edge:
Working temperature
0-60℃
A:1 ) Adjust the display ratio with the mode switch button;
Power supply
12V /2A
Power consumption
<10W
2 ) Set TV to full screen mode(full pixel display).
Q: the TV shows "No signal"
Product dimension
214(L)x108.6(W)x25.5(H)mm
A:1 ) Please check whether there is a HDMI signal input;
Weight
600g
Color
Black
2 ) Tr y to replace high quality or shorter HDMI cables
3 ) Tr y to reduce the resolution of signal source.
Disclaimer
The product name and brand name may be registered trademark of
related manufactures. ™ and ® may be omitted on the user manual.
The pictures in this user manual are just for reference. The terms HDMI,
HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
We reser ve the rights to make changes without further notice to a product
or system described herein to improve reliability, function or design.
HDMI 1×2 Video Wall Controller
User Manual