EDIFIER EDF200018, TWS200 Plus User Manual

TWS200 Plus
True Wireless Stereo Earbuds
www.edifier.com
EN · Product description and accessories
Pairing button
Charging case
Charging cable
Storage bag
Note: Images are for illustrative purposes only and may differ from the
actual product.
■ User guide
●
•
L
R
●
•
•
●
•
•
Charge the earbuds
You may hear a warning tone when at low
battery level, please place the earbuds in
the case for charging.
Charge the charging case
If power indicator flashes six times rapidly
when the case is opened, it indicates the
case has a low battery capacity, please
charge it in time.
Power indicator steady lit = charging
Power indicator off = fully charged
Battery level indicator on the
charging case
When the charging case is opened/closed,
the power indicator will show the case’s
battery level;
if flashes three times slowly: full battery level;
if flashes twice slowly: medium battery level;
if flashes once slowly: low battery level;
if flashes six times rapidly: battery level is less
than 10%
Power indicator (next to the charging port)
Input: 5V
5V
35mA(earbuds)
1A(charging case)
Warning: The rechargeable batteries that provide power for this product must be
disposed properly for recycling. Do not dispose of batteries in fire to prevent an explosion.
●
Power on when the
case is opened.
●
Power off when the
case is closed.
•
Bluetooth pairing: red and
white lights flash rapidly
White light is lit for 1 second
●
Pairing
•
Place the earbuds in the case, and
double click the pairing button to
enter Bluetooth pairing.
•
When not connected with any Bluetooth
device, place the earbuds in the case, and
press and hold the pairing button for
around 10 seconds and release until the
white light flashes rapidly, so as to enter
TWS pairing mode and clear pairing records.
•
TWS pairing: white light flashes
rapidly
When successful, white light is
lit for 1 second and then the red
and whilte lights flash rapidly.
EDIFIER TWS200 Plus
Search for and connect to "EDIFIER TWS200 Plus", after pairing is successful, the
white light of the charging case will flash twice per 5 seconds.
●
Functional operation
Accept/end a call:
double click the left or right
earbud
Pause/play:
double click the left or right
earbud
Previous track:
triple click the left earbud
Next track:
triple click the right earbud
Note: Images are for illustrative purposes only and may differ from the actual product.
■ FAQs
When charging the charging case, the indicator is off.
•
Please ensure the charging case is correctly connected with power source.
No sound
•
•
•
•
Check if the earbuds are operating.
Check if the earbuds volume are at an appropriate level.
Check if the earbuds are correctly connected with mobile phone.
Check if the earbuds are operating within a normal working range.
The call quality of the earbuds are not good.
•
•
Check if mobile phone is in an area with strong signal.
Please ensure the earbuds are within effective distance (10m) and no
obstacle between the earbuds and mobile phone.
When playing music, cannot control pause/play/previous track/next
track via the earbuds.
•
Please ensure the paired device support AVRCP (Audio Video Remote
Control Profile) profile.
■ Maintenance
•
Do not use a fast charger to charge the product to avoid affecting service
•
If not used for long periods of time, please charge the product with
•
Keep the product away from humid places to avoid affecting internal
live of the battery.
lithium battery every three months.
circuit. Do not use the product during intense exercise or with much
sweat to prevent sweat from dropping into the product to make
damage.
•
Do not put the product in places exposed to sun or with high
temperature. High temperature will shorten service life of electronic
components, damage battery and make plastic components deformed.
•
Do not put the product in cold places to avoid damaging internal
•
Do not dismantle the product. Non-professional personnel may
•
Do not drop, strongly vibrate, strike the product with hard object to
•
•
Do not use drastic chemicals or cleaner to clean the product.
circuit board.
damage the product.
avoid damaging internal circuit.
Do not use sharp objects to scratch product surface to avoid
damaging shell and affecting facade.
Model: EDF200018
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
2020 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for different applications.
Pictures and illustrations shown on this manual may be slightly
different from actual product. If any difference is found, the actual
product prevails.