Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use in the following countries: United States, Canada, Japan, China, S. Korea, Australia, and Europe.

Please refer to the Declaration of Conformity (DoC) for details of other country markings at:

http://www.zebra.com/doc

Note: Europe includes: Austria, Belgium, Bulgaria, Czech Republic,

Croatia, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain,

Sweden, Switzerland and the United Kingdom.

Operation of the device without regulatory approval is illegal.

Country Roaming

This device incorporates the International Roaming feature

(IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use.

Ad-Hoc Operation (2.4 GHz band)

Ad-Hoc operation is limited to Channels 1-11 (2412-2462 MHz).

Workabout Pro4 & Accessories Regulatory & Warranty Guide

Frequency of Operation - FCC and IC

5 GHz Only

The use in the UNII (Unlicensed National Information Infrastructure) band 1 (5150-5250 MHz) is restricted to Indoor Use Only; any other use will make the operation of this device illegal.

Industry Canada Statement:

CAUTION: The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-Channel mobile satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850

MHz and these radars could cause interference and/or damage to LE-LAN devices.

Avertissement: Le dispositive fonctionnant dans la bande 5150-

5250 MHz est réservé uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.

Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bands 5250-5350

MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

3. Health and Safety Recommendations

Ergonomic Recommendations

CAUTION: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below.

Workabout Pro4 & Accessories Regulatory & Warranty Guide

Consult with your local Health & Safety Manager to ensure that you are adhering to your company's safety programs to prevent employee injury.

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures

Note: The following section is only applicable for mobile computers.

Vehicle Installation

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems).

Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.

An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

Position your device within easy reach. Be able to access your device without removing your eyes from the road.

Note: Connection to an alert device that will cause a vehicle horn to sound or lights to flash, on receipt of a call on public roads, is not permitted.

Workabout Pro4 & Accessories Regulatory & Warranty Guide

Important: Before installing or using, check state and local laws regarding windshield mounting and use of equipment.

For Safe Installation

• Do not put your wireless equipment in a location that obstructs the drivers vision or interferes with the operation of the Vehicle.

• Do not cover an air bag.

Safety on the Road

Do not take notes or use the device while driving. Jotting down a “to do” list or flipping through your address book takes attention away from your primary responsibility, driving safely.

When driving a car, driving is your first responsibility - Give full attention to driving. Check the laws and regulations on the use of wireless devices in the areas where you drive. Always obey them.

When using a wireless device behind the wheel of a car, practice good common sense and remember the following tips:

1. Get to know your wireless device and any features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.

2. When available, use a hands free device.

3. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous.

4. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.

Workabout Pro4 & Accessories Regulatory & Warranty Guide

5. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road.

6. Use your wireless phone to call for help. Dial the Emergency services, (1-1-2 in Europe) or other local emergency number in the case of fire, traffic accident or medical emergencies.

Remember, it is a free call on your wireless phone! The call can be made regardless of any security codes and depending on a network, with or without a SIM card inserted.

7. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call the Emergency Services,

(1-1-2 in Europe) or other local emergency number, as you would want others to do for you.

8. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a brokendown vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.

The wireless industry reminds you to use your device / phone safely when driving.

Warning for Use of Wireless Devices

Please observe all warning notices with regard to the usage of wireless devices.

Workabout Pro4 & Accessories Regulatory & Warranty Guide

Potentially Hazardous Atmospheres - Vehicle Use

You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine.

Safety in Aircraft

Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a 'flight mode' or similar feature, consult airline staff as to its use in flight.

Safety in Hospital

Wireless devices transmit radio frequency energy and may affect medical electrical equipment.

Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or health care facilities.

These requests are designed to prevent possible interference with sensitive medical equipment.

Pacemakers

Pacemaker manufacturers recommended that a minimum of 15cm

(6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker.

These recommendations are consistent with independent research and recommendations by Wireless Technology Research.

Persons with Pacemakers:

• Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON.

Workabout Pro4 & Accessories Regulatory & Warranty Guide

• Should not carry the device in a breast pocket.

• If you have any reason to suspect that interference is taking place, turn OFF your wireless device.

• Should use the ear furthest from the pacemaker to minimise the potential for interference.

Other Medical Devices

Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device.

RF Exposure Guidelines

Safety Information

Reducing RF Exposure - Use Properly

Only operate the device in accordance with instructions supplied.

International

The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices.

For information on "International" human exposure to electromagnet fields refer to the Zebra Declaration of Conformity (DoC) at:

http://www.zebra.com/doc

For further information on the safety of RF energy from wireless devices, go to:

www.zebra.com/corporateresponsibility

Located under Wireless Communications and Health.

Workabout Pro4 & Accessories Regulatory & Warranty Guide

Europe

Hand-Held Devices

This device was tested for typical body-worn operation. Use only

Zebra tested and approved pouches, holsters, and similar accessories to ensure EU Compliance.

For RFID operation, to comply with EU RF exposure requirements, this device must be operated in the hand with a minimum separation distance of 20 cm or more from a person's body. Other operating configurations should be avoided.

US and Canada

Co-located Statement

To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filling.

Hand-Held Devices

This device was tested for typical body-worn operation. Use only

Zebra tested and approved pouches, holsters, and similar accessories to ensure FCC Compliance. The use of third-party pouches, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements, and should be avoided.

For RFID Operation:

To comply with FCC RF exposure requirements, this device must be operated in the hand with a minimum separation distance of 20 cm or more from a person’s body. Other operating configurations should be avoided.

Workabout Pro4 & Accessories Regulatory & Warranty Guide

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.

NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles)

Déclaration d'exposition aux radiations:

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

4. Laser Devices

Class 1 Laser devices are not considered to be hazardous when used for their intended purpose.

Figure 4.1 SE655 End-Cap Warning Label - Class 1

Workabout Pro4 & Accessories Regulatory & Warranty Guide

Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful.

The following statement is required to comply with US and international regulations.

Caution:

Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure.

Scanner and LED Labelling

End-Cap Warning Label

Slim Pod Warning Label

Slim Pod Protective Housing &

Certificate Label

SE655 LED Device – Class 1

LED Compliance Statement

Classified as “EXEMPT RISK GROUP” according to IEC

62471:2006 and EN 62471:2008

Workabout Pro4 & Accessories Regulatory & Warranty Guide

Figure 4.2 SE655 End-Cap Warning Label

Figure 4.3 SE655 Slim Pod Laser Window Warning Label

Workabout Pro4 & Accessories Regulatory & Warranty Guide

SE4500, SE965 and SE1524 Lasers – Class 2

Figure 4.4 SE4500 End-Cap Laser/LED Warning Label

Figure 4.5 SE4500 Slim Pod Laser Window Warning Label

Workabout Pro4 & Accessories Regulatory & Warranty Guide

Figure 4.6 SE4500 Protective Housing and Certificate Label

Figure 4.7 SE965 End-Cap Laser Warning Label

Workabout Pro4 & Accessories Regulatory & Warranty Guide

Figure 4.8 SE965 Slim Pod Laser Window Warning Label

Figure 4.9 SE965 Protective Housing and Certificate Label

Figure 4.10 SE1524 Scanner Laser Warning Label

Workabout Pro4 & Accessories Regulatory & Warranty Guide

5. Power Supply

Use ONLY a Zebra approved UL LISTED ITE (IEC/EN 60950-1,

LPS/SELV) power supply with electrical ratings: Output 5Vdc, min.

3A, with a maximum ambient temperature of 50 degrees C. Use of alternative power supply will invalidate any approvals given to this unit and may be dangerous.

6. Batteries

Taiwan-Recycling

EPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance with Article 15 of the

Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal.

Battery Information

CAUTION: Risk of explosion if battery is replaced by an incorrect type.

Use only Zebra approved batteries. Accessories which have battery charging capability are approved for use with the following battery models: Zebra WA3006 (3.7 V DC, 3300 mAh), WA3010 (3.7 V DC,

4400 mAh), WA3025 (3.7 V, 2850 mAh), WA3026 (3.7 V, 4680 mAh).

Zebra rechargeable battery packs are designed and constructed to the highest standards within the industry.

However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops.

Workabout Pro4 & Accessories Regulatory & Warranty Guide

When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half of full charge.

Replace the battery when a significant loss of run time is detected.

Standard warranty period for all Zebra batteries is 30 days, regardless of whether the battery was purchased separately or included as part of the mobile computer or bar code scanner. For more information on Zebra batteries, visit:

http://www.zebra.com/batterybasics

Battery Safety Guidelines

• The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment.

• Follow battery usage, storage, and charging guidelines found in the user's guide.

• Improper battery use may result in a fire, explosion, or other hazard.

• To charge the mobile device battery, the battery and charger temperatures must be between +32 ºF and +104 ºF (0 ºC and

+40 ºC)

• Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact support.

• Do not disassemble or open, crush, bend or deform, puncture, or shred.

• Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat.

Workabout Pro4 & Accessories Regulatory & Warranty Guide

• Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.

• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard.

• Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer.

• Battery usage by children should be supervised.

• Please follow local regulations to promptly dispose of used rechargeable batteries.

• Do not dispose of batteries in fire.

• Seek medical advice immediately if a battery has been swallowed.

• In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice.

• If you suspect damage to your equipment or battery, contact

Zebra support to arrange for inspection.

7. Use with Hearing Aids

When some wireless devices are used near some hearing devices

(hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and wireless devices also vary in the amount of interference they generate. In the event of interference you may want to consult your hearing aid supplier to discuss solutions.

Workabout Pro4 & Accessories Regulatory & Warranty Guide

____________________________________________________

8. Radio Frequency Interference

Requirements-FCC

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help.

Radio Transmitters (Part 15)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not

Workabout Pro4 & Accessories Regulatory & Warranty Guide

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The use of 5 GHz WLAN, for use in the US, has the following restrictions:

• Notched Band 5.60 - 5.65 GHz

____________________________________________________

9. Radio Frequency Interference

Requirements-Canada

ICES-003 (B)/NMB-003(B)

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada.

Radio Transmitters

For RLAN Devices:

The use of 5 GHz RLANs, for use in Canada, have the following restrictions:

• Restricted Band 5.60 - 5.65 GHz

This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de

Workabout Pro4 & Accessories Regulatory & Warranty Guide

provoquer un fonctionnement indésirable.

Label Marking: The Term "IC:" before the radio certification only signifies that Industry Canada technical specifications were met.

____________________________________________________

10. Marking and European Economic

Area (EEA)

The use of 2.4GHz RLANs, for use through the EEA, have the following restrictions:

• Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835 GHz

Bluetooth

® Wireless Technology for use through the EEA has the following restrictions:

• Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 -2.4835 GHz

RFID devices for use through the EEA have the following restrictions:

• Maximum radiated transmit power of 2W ERP in the frequency range 865.6-867.6MHz

The use of RFID Devices has varying restrictions for use within the

EEA; please refer to the Declaration of Conformity (DoC) for details at http://www.zebra.com/doc

Statement of Compliance

Zebra hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive

1999/5/EC and 2011/65/EU. A Declaration of Conformity may be obtained from: http://www.zebra.com/doc

Workabout Pro4 & Accessories Regulatory & Warranty Guide

Waste Electrical and Electronic Equipment

(WEEE)

English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling. For information on how to return product, please go to:

http://www.zebra.com/weee

Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être retournés à Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http://www.zebra.com/weee.

Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Zebra al final de su ciclo de vida para que sean reciclados. Si desea más información sobre cómo devolver un producto, visite: http://www.zebra.com/weee.

Български: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се връщат на Zebra за рециклиране. За информация относно връщането на продукти, моля отидете на адрес: http://www.zebra.com/weee.

Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum Recycling an Zebra zurückgesandt werden.

Informationen zur Rücksendung von Produkten finden Sie unter http://www.zebra.com/weee.

Italiano: Per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalità di restituzione, visitare il seguente sito Web: http://www.zebra.com/weee.

Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Zebra para reciclagem. Para obter informações sobre como devolver o produto, visite: http://www.zebra.com/weee.

Workabout Pro4 & Accessories Regulatory & Warranty Guide

Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra te worden teruggezonden voor recycling.

Raadpleeg http://www.zebra.com/weee voor meer informatie over het terugzenden van producten.

Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y zwróciæ do firmy Zebra w celu ich utylizacji.

Informacje na temat zwrotu produktów znajduj¹ siê na stronie internetowej http://www.zebra.com/weee.

Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti vrátit spoleènosti Zebra k recyklaci. Informace o zpùsobu vrácení produktu najdete na webové stránce: http://www.zebra.com/weee.

Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi: http://www.zebra.com/weee.

Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell eljuttatni újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el a http://www.zebra.com/weee weboldalra.

Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Zebra za reciklažo. Za informacije o vraèilu izdelka obišèite: http://www.zebra.com/weee.

Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Zebra för återvinning. Information om hur du returnerar produkten finns på http://www.zebra.com/weee.

Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Zebra-yhtiöön, kun tuotetta ei enää käytetä.

Lisätietoja tuotteen palauttamisesta on osoitteessa http:// www.zebra.com/weee.

Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er udtjent. Læs oplysningerne om returnering af produkter på: http://www.zebra.com/weee.

Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της

διάρκειας ζωής τους, πρέπει να επιστρέφονται στην Zebra για

Workabout Pro4 & Accessories Regulatory & Warranty Guide

ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την επιστροφή

ενός προϊόντος, επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee

στο Διαδίκτυο.

Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu rritornati għand Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk jogħġbok żur: http:/

/www.zebra.com/weee.

Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí doby ich životnosti vrátené spoločnosti Zebra na recykláciu.

Bližšie informácie o vrátení výrobkov nájdete na: http://www.zebra.com/weee.

Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžinti utilizuoti į kompaniją „Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite: http://www.zebra.com/weee.

Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Zebra otrreizējai pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Zebra, lūdzu, skatiet: http://www.zebra.com/weee.

TURKISH WEEE Statement of Compliance

EEE Yönetmeliğine Uygundur

Japan (VCCI) - Voluntary Control Council for Interference

Class BITE

Workabout Pro4 & Accessories Regulatory & Warranty Guide

Korea Warning Statement for Class B ITE

기 종별

B 급 기기

( 가정용 방송통신기

자재 )

사 용 자 안 내 문

이 기기는 가정용 (B 급 ) 전자파적합기기로서 주로 가

정에서 사용하는 것을 목적으로 하며 , 모든 지역에서

사용할 수 있습니다

Other Countries

Australia

Use of 5 GHz RLANs in Australia is restricted in the following band

5.50 - 5.65GHz.

Brazil

Declarações Regulamentares para 7528X, 7528XP, 7528XLF, 7528XHF,

7528XPLF, 7528XPHF, 7528XUHFN e 7528XPUHFN.

Nota: “A marca de certificação se aplica ao Transceptor, modelo

7528X,7528XP, 7528XLF, 7528XHF, 7528XPLF, 7528XPHF,

7528XUHFN e 7528XPUHFN. Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.”

Para maiores informações sobre ANATEL consulte o site: www.anatel.gov.br.

Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.

Este produto está homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resolução n°242/2000 e atende aos requisitos técnicos aplicados, incluindo os limites de exposição da

Taxa de Absorção Específica referente a campos elétricos, magnéticos e eletromagnéticos de radiofrequência, de acordo com as Resoluções n°

303/2002 e 533/2009.

Workabout Pro4 & Accessories Regulatory & Warranty Guide

Este dispositivo está em conformidade com as diretrizes de exposição à radiofrequência quando posicionado pelo menos 2.5 centímetros de distância do corpo. Para maiores informações, consulte o site da Anatel.

Chile

Este equipo cumple con la Resolución No 403 de 2008, de la

Subsecretaria de telecomunicaciones, relativa a radiaciones electromagnéticas.

China

通过访问以下网址可下载当地语言支持的产品说明书

http://www.zebra.com/CN-ZH/Pages/Contact_Us#support_tab

确认进网标贴和证书真伪可查询网址

:

http://www.tenaa.com.cn/

Quality Certificate

Mexico

Restrict Frequency Range to: 2.450 - 2.4835 GHz.

La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.

South Korea

해당 무선설비는 운용 중 전파혼신 가능성이 있음

당해 무선설비 는전파혼 신 가능성이 있으므로 인명안전과 관련된

서비스는 할 수 없습니다 .

Workabout Pro4 & Accessories Regulatory & Warranty Guide

Taiwan

臺灣

低功率電波輻射性電機管理辦法

第十二條

經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者

均不得擅自變更頻率、加大功率或變更原設計之特性及功能。

第十四條

低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有

干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。

前項合法通信，指依電信規定作業之無線電通信。

低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電

機設備之干擾。

在 5.25 - 5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使

用。

減少電磁波影響，請妥適使用。

⑋ቁ䴫⻱⌒ᖡ丯ˈ䃻࿕䚙

SAR 標準值 2.0W/kg ；送測產品實測值為：0.49 W/kg

Ukraine

Дане обладнання відповідає вимогам технічного регламенту №1057,

№ 2008 на обмеження щодо використання деяких небезпечних речовин в електричних та електронних пристроях.

Thailand

เครื่ องโทรคมนาคมและอุ ปกรณ นี้

มี ความสอดคล องตามข อกําหนดของ กทช .

Caution for Hong Kong

In accordance with HKTA1039, the band 5.15GHz - 5.35GHz is for indoor operation only.

Workabout Pro4 & Accessories Regulatory & Warranty Guide

Turkey

Bu cihaz Türkçe karakterlerin tamamını ihtiva eden ETSI TS 123.038

V8.0.0 (veya sonraki sürümün kodu) ve ETSI TS 123.040 V8.1.0 (veya sonraki sürümün kodu) teknik özelliklerine uygundur.

Workabout Pro4 & Accessories Regulatory & Warranty Guide

8 0 0 0 2 9 6 - 0 0 2

سلام! من یک ربات چت هوش مصنوعی هستم که به طور خاص برای کمک به شما در مورد Zebra Workabout Pro4 7528X آموزش دیده‌ام. من سند را به طور کامل بررسی کرده‌ام و می‌توانم به شما کمک کنم اطلاعات دقیقی را که نیاز دارید پیدا کنید یا محتوا را به زبان ساده و واضح توضیح دهم. چه به دنبال راهنمایی در مورد ویژگی‌های خاص، مراحل عیب‌یابی یا استفاده عمومی باشید، می‌توانید سوالات خود را بپرسید. هرچه جزئیات بیشتری در مورد نگرانی‌ها یا نیازهای خود ارائه دهید، من می‌توانم دقیق‌تر و موثرتر به شما کمک کنم!

دستیار در حال تایپ

دستیار از صفحه کلید خارج شده است. لطفا بعدا دوباره امتحان کنید.

فهرست مطالب

به نظر می‌رسد به سندی رسیده‌اید که به چندین زبان نوشته شده است، از جمله زبانی که زبان مادری شما نیست. می‌توانید از پیوندهای زیر برای پنهان کردن موقت صفحاتی که زبان مورد نظر شما را ندارند استفاده کنید.

تبلیغات

WORKABOUT PRO4

REGULATORY &

WARRANTY GUIDE

Warranty

Service Information

Radio Modules

Bluetooth

® Wireless Technology

Country Roaming

Ad-Hoc Operation (2.4 GHz band)

Frequency of Operation - FCC and IC

5 GHz Only

Industry Canada Statement:

Ergonomic Recommendations

Vehicle Installation

Warning for Use of Wireless Devices

Potentially Hazardous Atmospheres - Vehicle Use

Safety in Aircraft

Safety in Hospital

Pacemakers

Other Medical Devices

RF Exposure Guidelines

Safety Information

Reducing RF Exposure - Use Properly

International

Europe

Hand-Held Devices

US and Canada

Co-located Statement

Hand-Held Devices

Scanner and LED Labelling

SE655 LED Device – Class 1

LED Compliance Statement

SE4500, SE965 and SE1524 Lasers – Class 2

Taiwan-Recycling

Battery Information

Battery Safety Guidelines

Radio Transmitters (Part 15)

Radio Transmitters

Statement of Compliance

Waste Electrical and Electronic Equipment

(WEEE)

Other Countries

:

เครื่ องโทรคมนาคมและอุ ปกรณ นี้

มี ความสอดคล องตามข อกําหนดของ กทช .

مرتبط

Zebra TC55 取扱説明書

Zebra MC67 取扱説明書

Zebra MC95XX Series Regulatory Guide

Zebra WT41N0 用户手册：AI 聊天和 PDF 下载

Zebra RS6000 Regulatory Guide

Zebra WT41 WT41N0 Regulatory Guide

Zebra TC75 Regulatory Guide

Zebra MC55A0, MC55N0 Regulatory Guide

Zebra TC20 TC200J Regulatory Guide

Zebra ZXP Series 3 Card Printer: AI Chat & PDF Access

Zebra TC51 TC510K User Manual

Zebra TC70x TC700K Regulatory Guide