Timer Instructions:
Before you begin, please make sure all parts and
proper quantities are included. Any parts damaged
during shipment must be reported within 15 days of
receipt. To report information regarding damages or if
you have any questions, please call 1-800-235-1262.
CAUTION!
The purpose of the timer is to prevent power overload
while charging laptops in conjunction with peripheral
components. The charge mode is independent of
auxiliary mode to minimize risk of power overage. To
provide charging power to laptops, toggle the Master
Switch to "CHRG". To provide power to peripheral
components, toggle the Master Switch to "AUX".
Master
Switch
LT30 Laptop Cart Timer
55210
The LT30 Cart Timer is a 240 minute time switch that provides accurate timing with 15 240 minute increments. Easy to set and operate.
The cycle timer is located on the instructor side of unit. The timer has 24 outlets which
are controlled by the red lighted master switch. The master switch is a 3-position rocker
switch. The timer controls 24 outlets (12-A & 12-B) designated for the charging of
laptops. The outlets are controlled by the cycle switch and can alternate charging time
between cycle A and B. The 7 outlets located on the student side may be used for
various auxiliary applications.
1.) Plug the power cord into a 110-volt standard outlet.
2.) Plug appropriate equipment into both Side “A” & “B”. Toggle the Master Switch to
the “CHARGE” position.
3.) To charge Side "A" ONLY, toggle the Cycle Switch to "A" position.
4.) To charge Side "B" ONLY, toggle the Cycle Switch to "B" position.
5.) To cycle charge BOTH "A & B", toggle the Cycle Switch to "CYCLE" position. Set
timer to desired cycling increment. After Side "A" expires the timer will activate
Side “B” for the same period of time and will continue to do so until the Master
Switch is set to the "OFF" position.
057866X page 1 of 1
">
