Bolt Watches Electron User Manual

Electron
LIGHT (A Key)
UP/BARO (E Key)
COMP (D Key)
MODE/SET (B Key)
BOLT
WATCHES
The Alarm will sound for 20 second with a
BELL SYMBOL on the screen, when your set
time is reached.
• Any Key on the watch will silence the alarm.
• Long press the B Key for 3s to exit ALARM
mode.
• You have the option to set 2 alarms if needed
VI. Stopwatch
• You will be able to measure up to
IV. Data History Query
99:59:59:59.
• Your watch will record a full week of data
• Enter stopwatch mode.
In any mode, press A key to turn on EL
history
• Press C Key to zero your stopwatch when it
backlight for 3s; press B key for 2s to enter
• You cannot access data history that if you
reaches its max time.
its setting mode.
have not stored any C Key and D Key can
• Press E Key to start/stop your counter.
be used to cycle through data history
II. Normal Time Display
• Long press the C Key to take the counter
• The data will automatically reset after 7 days
• Long press the B Key for 2s to enter time
back to zero.
setting mode. You will see the SECOND will
• While the stopwatch is running you can press
V. Setting the Alarm
be flashing and ready to set. If you do not
the C Key to create 1 of 99 laps.
• To turn ALARM mode on you are going to
set the time within one minute of entering
press the E Key. Your screen should display
this mode it will retain the original setting.
a “CHIME” to let you know its been selected. By long pressing the B Key you can enter
LAP query mode. This will be invalid if you
• Press the E Key to increase seconds/
• Now press the C Key to turn the ALARM
don’t have any laps saved.
minutes/hours slowly. Long press the E Key
mode on/off.
• Press the E Key to search your laps in
to rapidly increase seconds/minutes/hours.
• To set the alarm time long press B Key for 3s
ascending order.
• Press the C Key to decrease seconds
and the minutes will flash. Now a short press • Press the C Key to search your laps in
/minutes/hours slowly. Long Press the C Key
on B Key will cycle between hours and
descending order.
to rapidly increase seconds/minutes/hours.
minutes.
• Press A Key or B Key to exit LAP mode.
• To set the LCD contrast you can increase
• Use E Key to increases hours or minutes.
contrast by pressing the E Key and you can
• Use D Key to decrease hours or minutes.
decrease by pressing the C Key. Long
pressing will cycle through your contrast
rapidly in either direction. Contrast is on a
1-10 scale.
• Long press the B Key for 3 Seconds to
leave time setting Mode.
B. Function Display
A. Button and Function Overview
A Key: Backlight/Reset/Delete Data
B Key: Short Press for Function Mode/Long
Press for Settings
C Key: Altitude Measurement
D Key: Digital Compass
DOWN/ALTI (Key)
• Hour, Minute, Second, Month, Date and
Week display ( From 2000 to 2099)
• Dual Time Display
• Double Alarms
• Stopwatch ( Measuring Capacity 99:59:59)
• Countdown (Measuring Capacity 99:59:59)
• Pedometer Mode
• Pace Counter
• 12/24 Hour Display
• LCD Contrast Setting
• EL Backlight (3s display)
III. PEDOMETER
• Press E Key to cycle through pedometer data
(STEP/CALORIE/DISTANCE/SPORT TIME)
• Long press the C Key to start and stop the
pedometer.
• Long press the B Key to enter pedometer
settings (Unit of Measure/Footstep/ Weight/)
VII. Countdown
• You will be able to countdown from 99:59:59
• It will ring 30s when the countdown time is
00:00:00
Setting the Countdown
• Long press the B Key for 3s to enter
Countdown Mode.
• Press the B Key again to enter setting mode.
• Press E Key to increase the countdown time.
• Press C Key to decrease the countdown time.
• Long Press B Key for 3s to Confirm your
countdown setting.
Using the Countdown
• Use the E Key to start/pause and restart your
countdown.
• To restart your current countdown simply
press the E Key to pause and then C Key to
return the countdown to its original data.
IX. Dual Time
• You can run two separate times. T1 and T2.
• In T2 mode long press the B Key for 3s and
the second will begin flashing.
• E Key will increase second and D Key will
decrease seconds.
• By pressing the B key again, the hours will
begin flashing.
• Use the same keys to increase or decrease.
• Long press the B Key again to leave T2
setting mode
X. Monitoring Weather, Temperature and
Barometer
• In Metronome Mode press C Key to turn
on/off the Press the E Key to enter
Barometer Mode. It is called BARO Mode.
Press E Key in the mode of Barometer, Temperature and Weather Forecast Mode. The measurements will be displayed as follows
VIII. Pacer Metronome
EXAMPLE OF METRICS
• In Metronome Mode press C Key to turn
• In this mode you can enter barometer and
on/off the metronome.
temperature manual calibration mode by long
• Long press the C Key for 2s to return to zero
pressing B Key for 3s.
when the mode is paused.
• The calibration items show as below:
• The metronome will reset, if its not stopped,
AIRP TEMP
F.DEF
when the counter reaches 99999.
• In Temperature mode press the E Key to
• In the metronome mode long press, the B Key
increase and C Key to decrease temperature.
for 2s to enter the beat frequency setting.
• To modify pressure, enter the Mode of Input
• Press the E Key to increase your setting data.
Present Pressure Data.
• Press the C Key to decrease your setting data. • Use the E Key to increase pressure and C
• Long press the B Key to exit setting mode
Key to decrease.
• Long press B Key for 3s to confirm and back
to standard measurement mode.
5
6
Any issues? Reach out!
[email protected]
www.BoltWatches.com/Pages/Support-Center
Bolt Smartwatch
Model: Electron