advertisement
◉
Touch to zoom
Screen Protector Film Installa�on Instruc�ons - How to apply the film 1. 2. 3. 4. 5. Clean the screen thoroughly with a screen cleaning cloth. Make sure there is not any dust, lint, oil stain, fingerprints, or other particles on the screen surface. The anti-static film is shipped in between a thin top layer and a thin backing layer. Peel the backing layer off the film by about 3-5 cm (1-2 inches) along one edge. Do not peel off the whole piece at one time. Be careful no to touch the adhesive side of the film. Face the adhesive side to the screen. Align the film with the screen edge and attach the exposed part of the film to the screen. Apply pressure along the edges of the film with your finger. Continue across the screen while peeling off the backing layer a little at a time. Remove any remaining air bubbles by pushing them toward the outer edge of the film. Remove the top layer slowly from the screen protector film. 62+080129+00 www.durabook.com 62+009693+00
advertisement
Related manuals
advertisement