Veken HHB-008 BRUSH Electric Tea Kettle User Manual

Digital Programmable Glass Electric Tea Kettle
INSTRUCTION MANUAL
FOR HOUSEHOLD USE ONLY
110-120V 50/60Hz 1250-1500W 1.7L
IMPORTANT SAFETY INSTRUCTIONS
1. Read all instructions carefully and thoroughly, before any operation of the kettle．
2. To protect from electrical hazards, do not immerse this kettle, power base or cord
set in any liquid．
3. Avoid sprinkling the LCD panel and the buttons when operating. Water intrusion to
the electrical boards may lead to abnormal operation.
4. Close supervision is necessary when any appliance is used by or near children.
5. Do not overfill. Boiling water may overflow if filled more than the maximum level
indicator. Fill the kettle with cold water only.
6. To avoid fire, do not operate in the presence of explosive and/or flammable fumes.
Do not operate or place any part of this appliance on or near gas and electric burner
or in a heated oven．
7. Do not let the cord hang over the edge of a table or a counter. Do not let the cord
touch the hot surface．
8. Avoid touching the surface of the hot kettle, use the handle and knobs.
9. To avoid possible steam damage, do not face the spout when operating the kettle.
10. When operating on top of wooden furniture, use a protective pad to prevent
damage to delicate finishes.
11. To avoid scalding, always ensure the lid is correctly positioned before operation.
12. Extreme caution must be used when moving the kettle containing hot water.
Never lift the kettle by its lid. Always use the body handle.
13. Do not switch your kettle on if it is empty．
14. While the water is boiling or in the short time after the water boils, do not open
the lid to avoid scalding due to the hot steam. Please allow some time for the
steam to escape before opening the lid.
15. Clean or descale the bottom of the pot regularly to remove residue. Residue
buildup may affect the normal operation of the product.
1
BASIC INFORMATION
1. Parts of the Kettle:
A Cover ○
B Filter ○
C Glass Body ○
D Outside PP housing
○
E Cover Opening Button ○
F Handle cover ○
G Handle ○
H Base
○
2. Parts of the Control Panel:
1. Temperature Indicator
5. Boil
2. White (Tea)
6. Temperature Increase / Decrease
3. Green (Tea)
7. Keep Warm
4. Black (Tea)
8. Power
2
Operating Instruction
1. Please check whether your socket and power rating are suitable for this
product before use.
2. Do not exceed the maximum line of the mark (1700ml).
3. It is suggested to boil twice to clean the inner pot when first use.
4. Do not touch the upper part of the glass body of the kettle when and after
heating to avoid burns.
5. Place the kettle on a horizontal surface when in use.
6. Open the lid and pour water into the kettle.
7. Plug the power cord, set your preferred preset or adjust temperature, and press
the button. See the instructions on the next page for setting up
preset/temperature.
8. Take off the kettle for brewing.
3
Basic Operation
1. 4-Presets: the kettle has 4 presets:
. The relevant
temperatures are:
Presets
Temperature
160℉
175℉
195℉
212℉
When pressing each preset, the screen will start blinking 3 times, showing the
temperature for each preset. The buzzer will beep afterwards. Then the screen will
stop blinking and the kettle starts to heat. The screen will now show the current
real-time temperature.
2. Temperature Increase/Decrease button: Single press
button to set
the temperature within 105-212℉ range in 5℉ or 10℉ increments. When pressing
each button, the screen will start blinking 3 times, showing the temperature. The
buzzer will beep afterwards, then the screen will stop blinking and the kettle starts
to heat. The screen will now show the current real-time temperature.
3. Keep Warm Button: On the control panel, press the
buzzer will beep, The
button once and the
light is now blinking. After adjusting the temperature
or directly selecting the tea presets, the kettle will automatically enter the keep
warm state once the desired heat is reached. The keep-warm time is 2 hours. When
the water temperature is about 7℉ lower than the set value, the heat will be
resumed until 2 hours to maintain the set temperature.
4. Power button: In the powered state, this indicator will light up. To switch between
functions, press other corresponding buttons. To turn off the kettle, press the power
button during any working status.
5. Memory function: The memory function is automatically active when the kettle
enters the keep warm state after boiling. The kettle will keep the temperature within
4
ten times of kettle lifting and when the temperature does not drop more than 8
degrees below the set temperature. Otherwise, the kettle will exit the keep warm
and memory function.
How to care for your kettle
1. Wipe the exterior of the kettle with a soft, damp cloth or sponge. Remove stubborn
spots with a cloth moistened with mild liquid detergent. Do not use abrasive
scouring pads or powders.
CAUTION: DO NOT rinse the body of the kettle directly with water, as it will
cause circuit failure.
2. From time to time, depending on the nature of your water supply, a boiled scale
deposit is naturally formed and can be found mostly adhered to the heating element,
thus reducing the heating efficiency.
3. The amount of boiled scale deposited (and subsequently the need to clean or rescale)
largely depends on the water hardness in your area and the frequency of which the
kettle is used．
4. A boiled scale is not harmful to your health. But if poured into your beverage, it
can give a powdery taste to your drink. Therefore, the kettle should be descaled
periodically as indicated below．
Descaling
Under normal use, it is generally necessary to clean and descale at least twice a year ,
the specific method is as follows:
1. Mix daily vinegar with water in a ratio of 1:2, fill the kettle (to the highest water
level) to start boiling water, and wait for the kettle to boil.
2. Leave the mixture for 12 hours.
3. Pour off the mixture.
4. Fill clean water to the highest water level and restart the boil function.
5. Pour off the boiling water, The scale and mixture have now been removed and the
cleaning of the kettle is completed.
5
Warranty
To provide customers with quality shopping and user experience, we guarantee to
replace or issue a refund or provide acceptable solutions to any defective products
(as customers prefer) from the date of purchase to 2 years. Proof of purchase must
be provided (Amazon order number or receipt) when making a claim to our
customer support center. Warranty registration may be requested within a month
since the date of purchase, by sending your Amazon order number to the mailbox:
[email protected]
The warranty is not transferable. We only provide warranty services to buyers who
purchased from our Amazon store and possess the purchase proof, and not to any
other purchaser or subsequent owner. Price matching policy is not applicable.
No price difference refund.
Sellers are the responsible party. Amazon allows different sellers to sell the
same product, so please confirm the seller by checking the order details before
contacting us.
WHAT IS COVERED
1.
Received defective or used (proof needed) products;
2.
Received with missing parts;
3.
Defective item under proper use.
WHAT IS NOT COVERED
1. Purchased from non-Amazon channel or other physical stores;
2. Gift without proof of purchase;
3. Tampering/ abnormal use/ accidental damage or commercial use;
4. Replacements and parts.
5. Installation fee/ labor fee.
MAKING A CLAIM
If you have any problems when using our products, you can choose any of
the methods to reach out to us.
6
MANUFACTURER SUPPORT
Toll free: 1-888-281-8150(24/7)
Email: [email protected]
7