Before starting to set up a Link, please confirm the following:
1. Your PC meets the recommended specs.
2. Your Oculus software is up to date on both your PC and headset.
Steps to use your Meta Quest or Quest 2 with Link
Download the Oculus app from Oculus.com and install the app on your PC.
Follow the instructions to set up your profile and Select Quest 2 on the app.
Turn on your Quest 2 headset.
Plug the USB-C end into your headset and the USB-A end into a USB 3.0 port on your
compatible gaming PC.
5. Strap your link cable to your headset before wearing your headset.
6. Put on your headset to complete the in-headset instructions.
A message displays in VR prompting you to Allow access to data. Select Deny. If you
mistakenly 'Allow' the prompt, you must unplug your USB cable from the headset and
plug it back in.
When prompted to Enable Oculus Link, select Enable to begin remote rendering
using Oculus Link.
7. Enjoy the PC VR games on Oculus Rift or SteamVR.
1.
2.
3.
4.
Here is a video tutorial from Oculus official:
https://www.youtube.com/watch?v=IQrPiTlsU9I
If you’re unable to enable Oculus Link:
If you don't see Add Meta Quest as the device on the PC software: log out of the PC
software and log back in.
If you don't see the Enable Link pop-up on the PC software: log out of the PC software
and log back in.
If you don't see the Enable Link option under Settings on your headset: completely
power off the headset and restart.
If it still fails, please look up Troubleshooting PDF or contact WARRKY for tech support.
-Amazon Buyer/Seller message:
1. Go to Your Orders.
2. Find your order in the list.
3. Select Problem with order.
Choose your topic from list displayed.
4. Select Contact seller.
-WARRKY Support Email:
[email protected]
You will have quick and responsible tech support within 18hrs.
">
