JVC AV-21GG11-Y Colour Television Instructions

Contents
COLOUR TELEVISION
INSTRUCTIONS
Thank you for buying this JVC
colour television.
To make sure you understand how to
use your new TV, please read this
manual thoroughly before you begin.
AV-21GG11
AV-21GG21
2
3
Safety precautions
Preparation
1 Confirm which remote control you have ...... 3
2 Inserting the batteries ..................................... 3
3 Connecting the aerial and external devices ... 4
4 Connecting the power cord ........................ 6
5 SETUP TOUR .............................................. 6
Basic operation
7
Remote control buttons and functions 8
PICTURE MODE button ................................. 8
COLOUR SYSTEM button ............................. 8
SOUND SYSTEM button ............................... 8
DISPLAY button ............................................. 9
RETURN + button .......................................... 9
CHANNEL SCAN button ................................ 9
MUTING button ............................................. 9
OFF TIMER button ......................................... 9
Viewing teletext programmes
Using the TV’s menus
10, 11
12
Basic operation ............................................ 12
ON TIMER ..................................................... 13
INPUT ........................................................... 13
VNR ............................................................... 13
AUTO SHUTOFF .......................................... 14
CHILD LOCK ................................................. 14
BLUE BACK .................................................. 14
Picture Adjustments .................................... 15
SETUP TOUR ............................................... 15
AUTO CH PRESET ....................................... 15
MANUAL CH PRESET .................................. 16
SKIP .............................................................. 17
LANGUAGE .................................................. 17
TEXT (Teletext Language) ........................... 17
Using the buttons on the TV
18
Troubleshooting
19
Specifications
Back cover
LCT1385-001A
Safety precautions
WARNING
• To prevent fire or shock hazard, do not expose the TV to rain or moisture.
CAUTION
• Operate only from the power source indicated on the rear of the TV.
• Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by
the mains plug. Do not pull on the power cord.
• Never block or cover the cabinet openings for
ventilation. Never install the TV where good
15 cm
ventilation is unattainable. When installing
this TV, leave spaces for ventilation around
the TV more than the minimum distances
shown in the diagram.
10 cm
10 cm
15 cm
• Do not allow objects or liquid into the
cabinet openings.
• In the event of a fault, unplug the TV and call a service technician. Do not attempt to
repair it by yourself or remove the rear cover.
• The surface of the TV screen is easily damaged. Be very careful with it when handling
the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it
forcefully. Never use any cleaner or detergent on it.
• When you don’t use this TV for a long period of time, be sure to unplug it.
2
Preparation
1 Confirm which remote control you have
Your TV comes with one of the two remote controls shown below. Functions you can
operate differ depending on the type of remote control.
RM-C91
RM-C360GY
POWER
POWER
SYSTEM
COLOUR SOUND
SYSTEM
COLOUR SOUND MUTING
TV/VIDEO
DISPLAY
PICTURE
MODE
1
2
3
4
5
6
TV/TEXT
MENU
OFF
TIMER
7
CHANNEL RETURN+
SCAN
8
9
0
-/--
TV/VIDEO
1
2
3
4
5
6
7
8
9
0
-/--
DISPLAY
MUTING
OFF
TIMER
PICTURE
MODE
CHANNEL RETURN+
SCAN
MENU
CHANNEL
VOLUME
VOLUME
CHANNEL
REMOTE CONTROL UNIT
RM-C360GY
TEXT
REVEAL
HOLD
INDEX
SUBPAGE
SIZE
CANCEL
RM-C91
TV
2 Inserting the batteries
Correctly insert two batteries, observing the , and
. polarities and inserting the . end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly, fit new
batteries.
The supplied batteries are for testing, not regular use.
3
Preparation
3 Connecting the aerial and external devices
• For further details, refer to the manuals provided with the devices you are connecting.
• Connecting cables are not supplied.
• The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either jack
is output through both. You cannot provide input to both the front and rear jacks at the same
time. Disconnect one input, or use one of the jacks as an output jack only (for monitoring or
recording).
■ Connecting the aerial and VCR
Connecting the aerial
VHF/UHF outdoor aerial
VIDEO
AUDIO
IN
OUT
Connecting the aerial and VCR
VHF/UHF outdoor aerial
2
VIDEO
AUDIO
IN
OUT
3
To RF
output
1
4
To video
output
To aerial input
To audio
output
VCR
Preparation
■ Connecting other external devices
To audio
output
VIDEO
AUDIO
To video
output
VCR (for playing)
IN
VCR (for recording)
OUT
To audio
input
To video
input
To video
output
Camcorder
To audio
output
or
TV game
IN
VIDEO
AUDIO
5
Preparation
4 Connecting the power cord
Connect the power cord to the AC outlet.
Operate only from the power source indicated on the rear of the TV.
5 SETUP TOUR
When the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo is
displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR.
• In case of resetting that the reason for such as removal, you can set the SETUP TOUR
function on the “MENU 3” menu. For details, see page 15.
1 Press the Main power button
on the TV.
The POWER lamp lights. After the
JVC logo has been displayed, the
TV automatically switches to the
language setting mode.
ON TIMER POWER
POWER lamp Main power button
2 Press the MENU / buttons
to select the on-screen
language.
3 Press the MENU y button.
Selecting English or Russian onscreen language:
SYSTEM
COLOUR SOUND MUTING
DISPLAY
button
DISPLAY
TV/TEXT
MENU t
buttons
MENU
MENU
buttons
TV/VIDEO
The AUTO PROGRAMMING function
will start and the indicator blinks.
1
2
3
OFF
TIMER
Selecting Arabic or Persian onscreen language:
The “TEXT LANGUAGE” is displayed.
1 Press the MENU / buttons to
select the teletext language.
2 Press the MENU y button.
The AUTO PROGRAMMING
function will start and the
indicator blinks.
• To stop the AUTO PROGRAMMING
function, press the MENU / buttons.
When all the TV channels that can
be received on your TV have been
preset, the display goes out and the
AUTO PROGRAMMING function
operation is completed.
6
• If a TV channel you want to view is
not set to the channel, set it with the
MANUAL CH PRESET function.
For details, see page 16.
SETUP TOUR
h
SETUP TOUR
LANGUAGE
ENGLISH
NEXT
OPERATE BY -+
EXIT BY
DISPLAY
h
SETUP TOUR
NOW PROGRAMMING
STOP BY -+
Select Arabic or
Persian, then press y
button, the Teletext
language is displayed.
To view a Farsi Teletext
programme, select Farsi
language.
Press y button to start
the AUTO
PROGRAMMING
function.
Basic operation
• The illustration below is for the remote
control RM-C91. Your remote control may
not look exactly like the illustrations.
POWER
SYSTEM
COLOUR SOUND MUTING
DISPLAY
TV/TEXT
1 Press the POWER button to turn
your TV on.
• If your TV does not turn on, press the
Main power button on the TV then press
the POWER button again.
• You can also turn on your TV by pressing
any of the following buttons;
- the CHANNEL m button
- the Number buttons
- the TV/VIDEO button
2 Select a channel.
MENU
■ Press the CHANNEL m button.
TV/VIDEO
1
2
3
4
5
6
7
8
9
0
-/--
OFF
TIMER
PICTURE
MODE
CHANNEL RETURN+
SCAN
■ Press the Number buttons to enter
the channel number.
• If you want to enter a two-digit number,
press the -/-- button to select the two
digit mode “--”, then enter the channel
number.
VOLUME
CHANNEL
3 Press the VOLUME M button to
adjust the sound.
TEXT
REVEAL
• Up/down selection cannot be selected
for channels to which the SKIP has been
set to “YES”. See page 17.
HOLD
INDEX
SUBPAGE
SIZE
CANCEL
RM-C91
TV
4 To turn your TV off, press the
POWER button.
• We recommend that you press the Main
power button on the TV to turn the main
power off if you do not plan to use your
TV for a long time or if you wish to save
energy.
If the picture is not clear:
Press the COLOUR SYSTEM button to
select another colour system, see page 8.
If the sound is not clear:
Press the SOUND SYSTEM button to select
another sound system, see page 8.
Viewing Images from an External
Device:
Press the TV/VIDEO button to select the
VIDEO mode.
• You can also use the INPUT function to select
the VIDEO mode. For details, refer to page 13.
7
Remote control buttons and functions
PICTURE MODE button
SOUND SYSTEM button
You can select one of three picture
adjustment settings as you like.
If the sound is not clear even when the
picture appears normal, change the
current sound system to another sound
system.
Press this button to select a mode.
BRIGHT:
Heightens contrast and sharpness.
STANDARD:
Standardizes picture adjustments.
SOFT:
Softens contrast and sharpness.
• Pressing this button returns all the picture
settings in the “MENU 4” to their default
settings.
COLOUR SYSTEM button
If the picture is not clear or no colour
appears, change the current colour system
to another colour system.
Press this button to select the colour
system.
AUTO
PAL
NTSC4.43
SECAM
NTSC3.58
AUTO:
Automatic colour system selection.
• For the colour systems in each country or
region, see the table“Broadcasting systems”
on the back cover.
• If the picture is not normal in the AUTO
mode, change the AUTO mode to another
colour system.
8
Press this button to select the sound
system.
B/G
I
D/K
M
• For the sound systems in each country or
region, see the table “Broadcasting systems”
on the back cover.
• You cannot select any sound system when in
a VIDEO mode.
Remote control buttons and functions
DISPLAY button
CHANNEL SCAN button
You can continuously display the current
channel number or VIDEO mode on the
screen.
You can quickly view all TV channels
programmes that you can view on your
TV, and search for the programme you
want to view.
Press this button.
To turn the display off, press this button
again.
• When selecting a channel or VIDEO mode
with no input signal, indication of selected
channel or VIDEO mode becomes fixed on the
screen.
RETURN + button
You can set a channel you frequently view
to the Return Channel and you can view
that channel at any time with one-touch.
1 Press this button to start scanning
TV channels.
The TV channel programmes are each
displayed for several seconds.
• The programmes of TV channels for which
the SKIP function is set to “YES” are not
displayed.
2 When you find the programme you
want to view, press this button
again to stop scanning.
To set the channel to the Return
Channel:
MUTING button
1 Select the channel you want to set
to the Return Channel.
Press this button.
2 Press this button and hold until the
message “RETURN PLUS
PROGRAMMED!” appears.
• When you turn off the TV, the Return
Channel setting is cancelled.
You can turn the sound off instantly.
To turn the sound on, press this button
again.
OFF TIMER button
You can set the TV to automatically turn
off after a set time.
To view the Return Channel:
Press this button.
Press this button to select the period of
time.
• You can view two channels (current channel
and Return Channel) alternately by pressing
this button.
• You can set the period of time to a maximum
of 120 minutes in 10 minute increments.
• 1 minute before the OFF TIMER function
turns off the TV, “GOOD NIGHT!” appears.
To cancel the Return Channel setting:
Press this button and hold until the
message“RETURN PLUS CANCELLED!”
appears.
If no channel is set to the Return
Channel:
You can view the channel selected right
before the current channel by pressing
this button.
To display the remaining time, press this
button once.
To cancel the OFF TIMER function, press
this button to set the period of time to 0.
• The OFF TIMER function will not turn off the
TV’s main power.
9
Viewing teletext programmes
■ Basic operation
<Only for AV-21GG21>
1 Select a TV channel with a
teletext programme.
POWER
2 Press TV/TEXT button to change
the TV mode to the teletext
mode.
SYSTEM
COLOUR SOUND MUTING
DISPLAY
TV/TEXT
1
MENU
2
3
4
5
6
7
8
9
0
-/--
OFF
TIMER
PICTURE
MODE
CHANNEL RETURN+
SCAN
4
5
REVEAL
HOLD
INDEX
SUBPAGE
SIZE
CANCEL
RM-C91
1 TV/TEXT button
2 Coloured buttons
3 REVEAL button
4 SUBPAGE button
5 HOLD button
6 SIZE buttonI
7 CANCEL button
8 INDEX button
10
• If you have trouble receiving teletext
broadcasts, consult your local dealer or the
teletext station.
TEXT
2
3
To return to the TV mode, press the
TV/VIDEO button or the TV/TEXT
button.
VOLUME
CHANNEL
TEXT mode
(TEXT only)
3 Select a teletext page by
pressing the CHANNEL –/+
button, number buttons or
coloured buttons.
TV/VIDEO
1
TV mode
TV
6
7
8
This TV supports Farsi teletext
programmes. For details, see page 17.
Viewing teletext programmes
REVEAL
INDEX
Some teletext pages include hidden text
(such as answers to a quiz).
You can display the hidden text.
You can return to the index page instantly.
Each time you press the REVEAL
button, text is hidden or revealed.
HOLD
You can hold a teletext page on the screen
for as long as you want, even while
several other teletext pages are being
received.
Press the HOLD button.
To cancel the HOLD function, press the
HOLD button again.
Press the INDEX button.
Returns to teletext page 100 or a page
which has been specified.
SUBPAGE
Some teletext pages include sub-pages
that are automatically displayed.
You can hold any sub-page, or view it at
any time.
1 Press the SUBPAGE button to
operate the Sub-page function.
2 Press the Number buttons to enter a
sub-page number.
CANCEL
You can watch a TV programme even
when in the teletext mode.
1 Press the Number button to enter a
page number, or press a coloured
button.
The TV starts searching for a teletext
page.
2 Press the CANCEL button.
The TV programme appears.
When the TV finds the teletext page, its
page number appears in the upper left
of the screen.
Example:
3rd sub-page ➞ press 0, 0, 0 and 3.
• You can also select a sub-page by pressing
the red or green button.
To cancel the Sub-page function, press the
SUBPAGE button again.
SIZE
You can double the height of the teletext
display.
Press the SIZE button.
The teletext display changes cyclically.
3 Press the CANCEL button to view
the teletext page.
• Pressing the CANCEL button cannot
change the teletext mode to the TV mode.
11
Using the TV’s menus
This TV has a number of functions you can operate using the menus. To use all your TV’s
functions fully, you need to understand how to use the menus.
4 Press the MENU / buttons to
change function settings.
SYSTEM
COLOUR SOUND MUTING
DISPLAY
button
DISPLAY
Example:
TV/TEXT
MENU /
buttons
TV/VIDEO
1
Changes the AUTO
SHUTOFF setting.
MENU /
buttons
MENU
2
3
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
OFF
OFF
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
• With some functions, the operation
method may differ.
■ Basic operation
1 Press the MENU T buttons.
5 Press the DISPLAY button to turn
the display off.
One of the 4 menus is displayed.
MENU number
MENU
INPUT
ON TIMER
PR 1
VNR
SELECT BY
OPERATE BY -+
1
TV
0:00
OFF
EXIT BY
DISPLAY
2 Repeatedly press the MENU T
buttons to display a desired
menu.
• If you hold down the y button, the next
menu is displayed.
• If the selected function is on the first line,
pressing the r button displays the
preceding menu.
3 Repeatedly press the MENU T
buttons to select a desired
function.
12
2
ON
OFF
ON
⇔
OFF
TIMER
The icon
on
the left indicates
the currently
selected function.
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
• To operate a menu using the buttons on
the front panel of the TV, refer to
“Operating menus” on page 18.
Using the TV’s menus
ON TIMER
Your TV will automatically turn on and
tune into the channel you set after the
period of time you set.
1 Press MENU T to display the
“MENU 1” menu, then select
“ON TIMER”.
MENU
INPUT
ON TIMER
PR 1
VNR
1
TV
0:00
OFF
Channel
No.
OPERATE BY VOL-+
SELECT BY
EXIT BY
DISPLAY
PROGRAM BY -+
2 Press MENU / to select a channel
you want to view when the TV turns
on.
3 Press VOLUME M to select the
period of time after which you want
to turn on the TV.
The ON TIMER function starts.
• Each time you press the button, the period
of time changes in 15 minute intervals (up
to 12 hours).
To cancel the ON TIMER function,
press the VOLUME m button to set the
period of time to “0:00”.
4 Press DISPLAY to turn the display
off.
• If you turn off the TV’s main power by
pressing the Main power button, the ON
TIMER function is canceled.
• If you do not turn off the TV after starting
the ON TIMER function, the channel will
automatically switch to the channel set for
the ON TIMER function.
When the time set for the ON TIMER
function is reached:
The TV automatically turns on and the
channel set for the ON TIMER function is
displayed.
• For safety reasons the TV will automatically
turn off if no operations are made within
approximately two hours after the TV is
turned on with the ON TIMER function.
• The OFF TIMER function and AUTO
SHUTOFF function have priority over the ON
TIMER function.
INPUT
You can view images from VCRs or other
devices connected to your TV.
1 Press MENU T to display the
“MENU 1” menu, then select
“INPUT”.
MENU
INPUT
ON TIMER
PR 1
VNR
SELECT BY
OPERATE BY -+
1
TV
0:00
OFF
EXIT BY
DISPLAY
2 Press MENU / to select the
VIDEO mode.
TV mode changes to VIDEO mode.
VNR
You can reduce picture noise.
1 Press MENU T to display the
“MENU 1” menu, then select “VNR”.
MENU
INPUT
ON TIMER
PR 1
VNR
SELECT BY
OPERATE BY -+
1
TV
0:00
ON
EXIT BY
DISPLAY
2 Press MENU / to select “ON”.
To cancel the VNR function, select
“OFF”.
13
Using the TV’s menus
AUTO SHUTOFF
BLUE BACK
You can set your TV to turn off if no
signals are received for about 15 minutes
or longer after the end of a broadcast.
You can mute the sound and change the
picture into a blue screen while no signals
are received by the TV, or when the
signals are unstable.
1 Press MENU T to display the
“MENU 2” menu, then select “AUTO
SHUTOFF”.
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
ON
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU / to select “ON”.
To cancel the AUTO SHUTOFF function,
select “OFF”.
• The AUTO SHUTOFF function does not
turn off the TV’s main power.
• The AUTO SHUTOFF will not work for a
VIDEO mode.
CHILD LOCK
You can disable the front control buttons
of the TV.
When this function is set to “ON”, the TV
can be operated using only the remote
control.
Use this function to prevent children from
operating the TV without parental consent.
1 Press MENU T to display the
“MENU 2” menu, then select “CHILD
LOCK”.
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
ON
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU / to select “ON”.
To cancel the CHILD LOCK function,
select “OFF”.
• The CHILD LOCK function is canceled when
you turn the power off.
14
1 Press MENU T to display the
“MENU 2” menu, then select “BLUE
BACK”.
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
ON
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU / to select “ON”.
To cancel the BLUE BACK function,
select “OFF”.
• To view a broadcast even when the
reception signal is poor, set the BLUE
BACK function to “OFF”.
• Even when the BLUE BACK function is set
to “OFF”, the sound may not be audible.
Using the TV’s menus
Picture Adjustments
AUTO CH PRESET
You can adjust the picture as you like.
You can automatically preset all TV
channels that can be received by your TV
to channels.
1 Press MENU T to display the
“MENU 4” menu.
MENU
4
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
1 Press MENU T to display the
“MENU 3” menu, then select “AUTO
CH PRESET”.
TINT
COLOUR
BRIGHT
CONT.
SHARP
MENU
3
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
LANGUAGE
ENGLISH
2 Press MENU T to select an item
and press MENU / to adjust it.
TINT*
COLOUR
BRIGHT
CONT.
SHARP
- : Reddish
- : Lighter
- : Darker
- : Lower
- : Softer
+ : Greenish
+ : Deeper
+ : Brighter
+ : Higher
+ : Sharper
* TINT (tint) is displayed only when
viewing images from NTSC3.58 or
NTSC4.43 colour systems.
SETUP TOUR
You can start the SETUP TOUR function.
1 Press MENU T to display the
“MENU 3” menu, then select
“SETUP TOUR”.
MENU
3
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
LANGUAGE
ENGLISH
SELECT BY
OPERATE BY -+
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU / to start the AUTO
CH PRESET function.
“>>>ON SEARCH” is displayed on
the screen.
When all the TV channels that can be
received on your TV have been preset,
the display goes out and the AUTO CH
PRESET function operation is
completed.
To stop the AUTO CH PRESET:
Press the MENU / buttons.
• The AUTO CH PRESET function does not
preset a TV channel to the AV channel
(channel number 0).
• If the TV cannot preset the TV channel you
want to view, preset it manually. For details,
see “MANUAL CH PRESET” on page 16.
EXIT BY
DISPLAY
2 Press MENU / .
JVC logo is appear and the SETUP
TOUR function will start.
For details, see page 6.
15
Using the TV’s menus
MANUAL CH PRESET
You can manually preset desired TV
channels to desired channels.
If the picture is not clear:
Fine-tune the TV channel.
1 Press MENU T to display the
“MENU 3” menu, then select
“MANUAL CH PRESET”.
1 Press MENU t to select “FINE”.
MENU
3
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
LANGUAGE
ENGLISH
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU / .
The sub-menu is displayed.
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
NO
B/G
SELECT BY
PR 1 VL
PROGRAM BY -+
EXIT BY
SEARCH BY VOL-+ DISPLAY
• The channel number is displayed as a PR
number. For example, channel 1 will be
displayed as PR 1. However, the AV
channel will be displayed as AV.
3 Press MENU / to select the
channel number.
4 Press VOLUME M to start
searching for the TV channel.
“>>>” or “<<<” is displayed on the
screen.
When the TV finds a TV channel, the
“>>>” or “<<<” display goes out,
and the TV channel is preset to the
currently selected channel number.
• If the TV channel you want to preset is not
displayed, repeat step 4 until the TV finds
the TV channel you want to preset.
• To stop the MANUAL CH PRESET function,
press any button other than the VOLUME
m button.
16
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
NO
B/G
SELECT BY
PR 3 VL
PROGRAM BY -+
EXIT BY
FINE
BY VOL-+ DISPLAY
2 Hold VOLUME m down to fine-tune
the TV channel so that the best image
is displayed on screen.
“>” or “<” indicates that the TV is finetuning the TV channel.
If the sound is not clear:
1 Press MENU t to select “SOUND
SYSTEM”.
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
NO
M
SELECT BY
PR 3 VL
PROGRAM BY -+
EXIT BY
CHANGE BY VOL-+ DISPLAY
2 Press VOLUME m to select the
appropriate sound system.
• For the sound systems in each country
or region, refer to the table
“Broadcasting systems” on the back
cover.
5 Press MENU T to select
“MANUAL”.
6 Repeat steps 3 to 5 if you want to
preset another TV channel to a
channel.
Using the TV’s menus
SKIP
LANGUAGE
You can set undesired channels to be
skipped. Channels set to be skipped
cannot be selected by the CHANNEL m
buttons nor the CHANNEL SCAN button.
You can select the language for the onscreen display.
• Channels to which TV channels have not
been preset are automatically set to be
skipped.
1 Press MENU T to display the
“MENU 3” menu, then select
“MANUAL CH PRESET”.
2 Press MENU / .
The sub-menu is displayed.
3 Press MENU T to select “SKIP”.
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
1 Press MENU T to display the
“MENU 3” menu, then select
“LANGUAGE”.
MENU
3
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
LANGUAGE
ENGLISH
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU / to select
language.
The on-screen display indications are
in the selected language.
NO
M
SELECT BY
PR 3 VL
PROGRAM BY -+
EXIT BY
YES/NO BY VOL-+ DISPLAY
4 Press MENU / to select the
channel you want to skip.
5 Press VOLUME M to select “YES”.
The channel is set to be skipped.
To cancel the SKIP function, select
“NO”.
6 Repeat steps 4 and 5 if you want to
set another channel to skip.
TEXT (Teletext Language)
You can view a Farsi teletext programme.
1 Press MENU T to display the
“MENU 3” menu, then select
“LANGUAGE”.
2 Press MENU
Persian.
/
3 Press MENU
function.
to select TEXT
to select Arabic or
4 Press MENU / to select Farsi.
Select Arabic to view an Arabic teletext
programme.
17
Using the buttons on the TV
CH PRESET
CH
1
2
ON TIMER POWER
3
4 5
6
1 MENU buttons
• MENU button
• MENU m buttons
2 CHANNEL m buttons
3 VOLUME m buttons
4 ON TIMER lamp
The light is switched on while ON
TIMER function is operating.
5 POWER lamp
When the Main power is on, the
light is red.
6 Main power button
Basic operation
Operating menus
• Check to make sure the CHILD LOCK
function is set to “OFF”. When the CHILD
LOCK function is set to “ON”, the TV cannot
be operated using the front control buttons.
For details, see “CHILD LOCK” on page 14.
You can operate functions in menus using
the front control buttons on the TV.
1 Press CHANNEL M to turn the TV
on from standby mode.
2 Press MENU y repeatedly to display
the menu you want to use.
2 Press CHANNEL M to select a
channel.
3 Press MENU y to select the desired
function or item.
3 Press VOLUME M to adjust the
volume.
4 Press MENU M or VOLUME M to
carry out the desired operation.
For details, see the description for each
function.
4 To turn your TV off, press the Main
power button to turn off the TV’s
main power.
1 Press MENU y to display a menu.
5 Press VOLUME M to turn the menu
display off.
To change the TV mode to the VIDEO
mode:
To turn the sub-menu display off:
• Select the VIDEO mode with the INPUT
function in “MENU 1”.
1 Press MENU y to select “EXIT”.
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
NO
M
SELECT BY
PR 3 VL
PROGRAM BY -+
EXIT BY
EXIT
BY VOL-+ DISPLAY
2 Press VOLUME m to turn the display
off.
18
Troubleshooting
If there is no picture or the TV does not operate normally, make sure the problem isn’t due
to the reasons indicated below.
If the problem persists even after taking the measures indicated, please contact a service
technician.
Cannot turn the TV on
Poor picture
• Press the Main power button on the TV.
• Connect the power cord to the AC outlet.
• Press the COLOUR SYSTEM button to select
another colour system. (see page 8.)
• Adjust the picture settings. (see page 15.)
• Set the Picture mode to STANDARD.
(see page 8.)
• If noise (snow) totally blocks out the picture,
check the following.
- Have the TV and aerial been connected
properly?
- Has the aerial cable been damaged?
- Is the aerial pointing in the right direction?
- Is the aerial itself faulty?
• If the TV or aerial suffer interference from
other equipment, stripes or noise may appear
in the picture. Move any equipment which
can cause interference away from the TV.
• If the TV or aerial suffer interference from
signals reflecting from mountains or
buildings, double-pictures (ghosting) will
occur. Change the aerial’s direction or replace
it with an aerial with better directionality.
• When a white and bright still image (such as
a white dress) is displayed on the screen, the
white part may look as if it is coloured. When
the image disappears from the screen, the
unnatural colours will also disappear.
The screen turns blue
• Is the BLUE BACK function on? (see page 14.)
Remote control inoperable
• Replace the batteries. (see page 3.)
Buttons on front of the TV do not work
• Switch the CHILD LOCK function off.
(see page 14.)
TV does not respond immediately
• Press the main power button on the TV to
turn off the main power. Press the main
power button again to turn on the TV. If the
TV returns to a normal state, operation is
normal.
The TV turns off suddenly
• Is the OFF TIMER function set to operate?
(see page 9.)
• Is the AUTO SHUTOFF function on?
(see page 14.)
• Have you not performed an operation for
about two hours after the TV was switched on
by the ON TIMER function? (see page 13.) If
you don’t perform an operation within about
two hours, the TV is automatically switched
off for safety.
The TV turns on suddenly
• Is the ON TIMER function set to operate?
(see page 13.)
The TV channel changes suddenly
• Is the ON TIMER function set to operate?
(see page 13.)
Poor sound
• Press the SOUND SYSTEM button to select
another sound system. (see page 8.)
No receivable teletext programme
• Select a channel with teletext information.
You cannot watch teletext recorded on a video
tape.
19
Specifications
TV RF systems
B, G, I, D, K, K1, M
Colour systems
PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz
Receiving channels
VHF low channel (VL), VHF high channel (VH), UHF channel (U)
Receives cable channels in mid band, super band and hyper band.
External input / output
INPUT:
OUTPUT:
VIDEO input (RCA), AUDIO input (RCA)
VIDEO output (RCA), AUDIO output (RCA)
Teletext system
FLOF (Fastext), WST (World Standard Text)
Language displayed by teletext
English, French, Turkish, Arabic, Farsi
Accessories
• Remote control unit: RM-C360GY for AV-21GG11, RM-C91 for AV-21GG21
• AA / R6 / UM-3 dry cell battery × 2
Design and specifications subject to change without notice.
Broadcasting systems
Area
Asia,
Middle
East
Country or Region
Bahrain, Kuwait, Oman, Qatar,
United Arab Emirates, Yemen, etc.
Indonesia, Malaysia, Singapore, Thailand,
India, etc.
System
Colour
Sound
PAL
B/G
China, Vietnam, etc.
PAL
D/K
Hong Kong, etc.
PAL
I
SECAM
B/G
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
NTSC
M
Russia, etc.
SECAM
D/K
Czech Republic, Poland, etc.
PAL
D/K
Germany, Holland, Belgium, etc.
PAL
B/G
UK, etc.
PAL
I
Oceania
Australia, New Zealand, etc.
PAL
B/G
Republic of South Africa, etc.
PAL
I
Africa
Nigeria, etc.
PAL
B/G
SECAM
B/G
Europe
Egypt, Morocco, etc.
© 2003 VICTOR COMPANY OF JAPAN, LIMITED
0403-MK-NV-EG
This file has been downloaded from:
www.UsersManualGuide.com
User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes..
Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide,
manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product,
documentation manual, user maintenance, brochure, user reference, pdf manual
Downloaded from: https://www.usersmanualguide.com/
">