Flexco C/EBC Cutter Instructions

The FLEXCO C/EBC Cutter is a versatile tool designed for various applications. It features a rail/guide system that allows for precise and efficient cutting of materials. This system can be modified to accommodate different materials and cutting widths. The cutter operates with a simple and straightforward design, making it easy to use and maintain.

PDF

Document

How To Modify Your C/EBC Cutter
With The Rail/Guide System
Existing EBC1 shown with retrofit rail kit.
NOTE: Be sure to unplug tool prior to working on it.
Stay clear of any sharp areas or pinch points.
Step 1. Loosen existing rail lock nuts with 8 mm or 5/16” hex and 17 mm box end/crescent wrench. Set aside lock nuts, bearings and washers.
Step 2. Attach retrofit rail kit to existing structure as shown.
A
C
B
D
Step 3. (A) Remove bolt, washer, and lock nut
from new retrofit rail kit.
(B) A
dd washer, bearing, and lock nut to
back of rail system.
(C) A
dd washer and lock nut to front, center of
rail system.
(D) Add bolt, bearing, washer, and lock nut to front,
outside of rail system.
Step 4. Securely hand tighten all bolts and lock nuts.
Completed Tool
Visit www.flexco.com for other Flexco locations and products, or to find an authorized distributor.
&copy;2015 Flexible Steel Lacing Company. 12-28-23. X3963
">

Hello! I am an AI chatbot specifically trained to assist you with the FLEXCO C/EBC Cutter Instructions. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

Rail/Guide System
Retrofit Kit
Lock Nuts
Bearings
Washers
Bolt
Precise Cutting

Frequently asked questions

Use an 8 mm or 5/16” hex wrench and a 17 mm box end/crescent wrench to loosen the existing rail lock nuts. Set the lock nuts, bearings, and washers aside for later use.

First, remove the bolt, washer, and lock nut from the new retrofit rail kit. Then, add a washer, bearing, and lock nut to the back of the rail system. Next, add a washer and lock nut to the front, center of the rail system. Finally, add a bolt, bearing, washer, and lock nut to the front, outside of the rail system. Ensure all bolts and lock nuts are securely hand tightened.

Visit the Flexco website at www.flexco.com for details on other Flexco locations, products, and authorized distributors.