DJI Mavic 3 Pro User Manual

User Manual
v1.2
2023.09
This document is copyrighted by DJI with all rights reserved. Unless otherwise authorized by
DJI, you are not eligible to use or allow others to use the document or any part of the document
by reproducing, transferring or selling the document. Users should only refer to this document
and the content thereof as instructions to operate DJI UAV. The document should not be used
for other purposes.
Searching for Keywords
Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe
Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac
to begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that
section.
Printing this Document
This document supports high resolution printing.
Revision Log
Version
Date
Revisions
v1.2
2023.09
Added Vision Assist, AR RTH, Vision Positioning and Obstacle Sensing
Switch, and Frame Guide, etc.
2
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Using this Manual
Legend
Important
Hints and Tips
Reference
Read Before the First Flight
DJITM provides users with tutorial videos and the following documents:
1. Safety Guidelines
2. Quick Start Guide
3. User Manual
It is recommended to watch all tutorial videos and read the safety guidelines before using for
the first time. Prepare for your first flight by reviewing the Quick Start Guide and refer to this
User Manual for more information.
Video Tutorials
According to the corresponding aircraft, visit the link or scan the QR code below to watch the
tutorial videos, which demonstrate how to use DJI MAVICTM 3 Pro safely:
MAVIC 3 PRO CINE
MAVIC 3 PRO
https://s.dji.com/guide57
https://s.dji.com/guide56
Download the DJI Fly App
Make sure to use DJI Fly during flight. Scan the QR code above to download the latest version.
• The DJI RC Pro and DJI RC remote controllers have the DJI Fly app already installed.
Users are required to download the DJI Fly app to their mobile device when using the
DJI RC-N1 remote controller.
• The Android version of DJI Fly is compatible with Android v7.0 and later. The iOS version
of DJI Fly is compatible with iOS v11.0 and later.
* For increased safety, flight is restricted to a height of 98.4 ft (30 m) and a range of 164 ft (50 m) when not
connected or logged into the app during flight. This applies to DJI Fly and all apps compatible with DJI
aircraft.
© 2023 DJI All Rights Reserved.
3
DJI Mavic 3 Pro User Manual
Download DJI Assistant 2
Download DJI ASSISTANTTM 2 (Consumer Drones Series)
https://www.dji.com/mavic-3-pro/downloads
• The operating temperature of this product is -10° to 40° C. It does not meet the
standard operating temperature for military-grade application (-55° to 125° C), which is
required to endure greater environmental variability. Operate the product appropriately
and only for applications that meet the operating temperature range requirements of
that grade.
4
© 2023 DJI All Rights Reserved.
Contents
Using this Manual
3
Legend
3
Read Before the First Flight
3
Video Tutorials
3
Download the DJI Fly App
3
Download DJI Assistant 2
4
Product Profile
9
Introduction
9
Feature Highlights
9
Using for the First Time
10
Preparing the Aircraft
10
Preparing the Remote Controller
11
Activating the DJI Mavic 3 Pro Aircraft
12
Binding the Aircraft and Remote Controller
12
Updating Firmware
Overview
12
13
Aircraft
13
DJI RC Pro
14
DJI RC Remote Controller
17
Flight Safety
20
Flight Environment Requirements
20
Operating the Aircraft Responsibly
20
Flight Restrictions
21
GEO (Geospatial Environment Online) System
21
Flight Limits
21
GEO Zones
23
Unlocking GEO Zones
23
Pre-Flight Checklist
23
Basic Flight
24
Auto Takeoff/Landing
24
Starting/Stopping the Motors
24
Controlling the Aircraft
26
Takeoff/Landing Procedures
27
Video Suggestions and Tips
27
Intelligent Flight Modes
28
FocusTrack
28
MasterShots
32
QuickShots
33
© 2023 DJI All Rights Reserved.
5
DJI Mavic 3 Pro User Manual
Hyperlapse
35
Waypoint Flight
37
Cruise Control
41
Aircraft
43
Flight Modes
43
Aircraft Status Indicators
44
Return to Home
45
Smart RTH
46
Low Battery RTH
49
Failsafe RTH
49
Landing Protection
50
Precision Landing
Vision Systems and Infrared Sensing System
Detection Range
Using the Vision System
Advanced Pilot Assistance Systems (APAS)
Landing Protection
Vision Assist
Collision Warning
52
53
55
55
56
57
Flight Recorder
58
Propellers
58
Attaching the propellers
Detaching the propellers
58
58
Intelligent Flight Battery
59
Battery Features
59
Using the Battery
60
Charging the Battery
61
Inserting/Removing the Battery
64
Gimbal and Camera
65
Gimbal Profile
65
Gimbal Operation Modes
65
Camera Profile
66
Storing and Exporting Photos and Videos
6
51
52
67
QuickTransfer
68
Usage
68
Remote Controller
70
DJI RC Pro
70
Operation
70
Remote Controller LEDs
75
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Remote Controller Alert
75
Optimal Transmission Zone
75
Linking the Remote Controller
76
Operating the Touchscreen
77
Advanced Features
DJI RC
79
80
Operation
80
Remote Controller LEDs
84
Remote Controller Alert
85
Optimal Transmission Zone
85
Linking the Remote Controller
86
Operating the Touchscreen
87
Advanced Features
89
DJI Fly App
91
Home
91
Camera View
92
Buttons Description
Screen Shortcuts
Settings
92
97
98
Safety
98
Control
99
Camera
100
Transmission
101
About
101
Appendix
104
Specifications
104
Camera Function Matrix
112
Firmware Update
113
Using DJI Fly
113
Using DJI Assistant 2 (Consumer Drones Series)
113
Post-Flight Checklist
114
Maintenance Instructions
114
Troubleshooting Procedures
115
Risk and Warnings
115
Disposal
116
C2 Certification
116
FAR Remote ID Compliance Information
121
After-Sales Information
121
© 2023 DJI All Rights Reserved.
7
Product Profile
This chapter introduces the major
features of the product.
8
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Product Profile
Introduction
DJI Mavic 3 Pro features both an infrared sensing system and omnidirectional vision systems,
allowing for hovering and flying indoors, outdoors, and for automatic Return to Home while
avoiding obstacles in all directions. The aircraft has a maximum flight speed of 47 mph
(75.6 kph) and a maximum flight time of 43 minutes.
The DJI RC Pro and DJI RC remote controllers have a built-in 5.5-in screen with a resolution
of 1920×1080 pixels. Users can connect to the internet via Wi-Fi, while the Android operating
system includes Bluetooth and GNSS. The remote controllers come with a wide range of aircraft
and gimbal controls as well as customizable buttons. DJI RC Pro has a high-bright screen and
has a maximum operating time of 3 hours. DJI RC has a maximum operating time of 4 hours.
Feature Highlights
Gimbal and Camera: DJI Mavic 3 Pro has a 4/3 CMOS sensor Hasselblad camera, capable
of shooting 12-bit RAW format photos and the dynamic range is up to 12.8 stops. It is also
equipped with a 1/1.3-in medium tele camera and a 1/2-in tele camera, which can shoot 4K
60fps video with 3x or 7x optical zoom. The newly added 10-bit D-Log M color mode provides a
more convenient experience for post-production color correction.
Video Transmission: with DJI’s long-range transmission O3+ technology, DJI Mavic 3 Pro offers
a maximum transmission range of 15 km and video quality at up to 1080p 60fps from the
aircraft to the DJI Fly app. The remote controller works at both 2.4 and 5.8 GHz, and is capable
of selecting the best transmission channel automatically.
Intelligent Flight Modes: the user can focus on operating the aircraft, while the Advanced Pilot
Assistance System (APAS) helps the aircraft avoid obstacles in all directions. With Intelligent
Flight Modes such as FocusTrack, MasterShots, Hyperlapse, QuickShots, or Waypoint Flight, the
user can enjoy taking photos or videos with ease.
• Only the DJI Mavic 3 Pro Cine aircraft comes with a built-in 1TB SSD, which supports
the recording and storing of Apple ProRes 422 HQ, Apple ProRes 422, and Apple
ProRes 422 LT video. Otherwise, the features and functions described in this manual
apply to both DJI Mavic 3 Pro and DJI Mavic 3 Pro Cine.
• The maximum flight time was tested in an environment without wind while flying at a
consistent flight speed of 20.1 mph (32.4 kph). The maximum flight speed was tested at
sea level altitude without wind.
• The remote control devices reach their maximum transmission distance (FCC) in a wide
open area with no electromagnetic interference at an altitude of about 120 m (400 ft).
The maximum transmission distance refers to the maximum distance that the aircraft
can still send and receive transmissions. It does not refer to the maximum distance
the aircraft can fly in a single flight. The maximum runtime was tested in a laboratory
environment. This value is for reference only.
• 5.8 GHz is not supported in certain regions. Observe local laws and regulations.
© 2023 DJI All Rights Reserved.
9
DJI Mavic 3 Pro User Manual
Using for the First Time
DJI Mavic 3 Pro is folded before being packaged. Follow the steps below to unfold the aircraft
and prepare the remote controller.
Preparing the Aircraft
1. Remove the storage cover.
2
1
2. All Intelligent Flight Batteries are in hibernation mode before shipment to ensure safety. Use
the provided charger to charge and activate the Intelligent Flight Batteries for the first time.
a. If using DJI 100W USB-C Power Adapter, it takes approximately 1 hour and 20 minutes to
100W
fully charge an Intelligent Flight Battery.
100W
b. If using DJI 65W Portable Charger, it takes approximately 1 hour and 36 minutes to fully
charge an Intelligent Flight Battery. Charging time is tested when using the fixed cable of
the charger. It is recommended to use this cable to charge the Intelligent Flight Battery.
65W
10
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
3. Unfold the front arms, followed by the rear arms, and then the propeller blades.
• Charger is not included with Mavic 3 Pro (Drone Only). It is recommended to use a PD
65W (or above) charger to charge the Intelligent Flight Battery.
• Use a power cable with compatible specifications for charging, and use a power adapter
if necessary.
• Make sure to unfold the front arms before unfolding the rear arms.
• Make sure the gimbal protector is removed and all arms are unfolded before powering
on the aircraft. Otherwise, it may affect the aircraft self-diagnostics.
• Attach the storage cover when the aircraft is not in use.
Preparing the Remote Controller
Follow the steps below to prepare the DJI RC Pro remote controller.
1. Use the provided charger to charge the remote controller via the USB-C port to activate the
battery.
2. Remove the control sticks from the storage slots on the remote controller and screw them
into place.
3. Unfold the antennas.
© 2023 DJI All Rights Reserved.
11
DJI Mavic 3 Pro User Manual
4. The remote controller needs to be activated before first use and an internet connection is
required for activation. Press, and then press again and hold the power button to power on
the remote controller. Follow the on-screen prompts to activate the remote controller.
Follow the steps below to prepare the DJI RC remote controller.
1. Remove the control sticks from the storage slots on the remote controller and screw them
into place.
2
1
2. The remote controller needs to be activated before first use and an internet connection is
required for activation. Press, and then press again and hold the power button to power on
the remote controller. Follow the on-screen prompts to activate the remote controller.
Activating the DJI Mavic 3 Pro Aircraft
DJI Mavic 3 Pro requires activation before first use. After powering on the aircraft and remote
controller, follow the on-screen prompts to activate DJI Mavic 3 Pro using DJI Fly. An internet
connection is required for activation.
Binding the Aircraft and Remote Controller
It is recommended to bind the aircraft and remote controller to help ensure the best possible
after-sales service. Follow the on-screen prompts after activation to bind the aircraft and
remote controller.
Updating Firmware
A prompt will appear in DJI Fly when new firmware is available. Update the firmware whenever
prompted to ensure optimal user experience.
12
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Overview
Aircraft
2
7
8
6
B
A
1
2
C
3
10
4
9
5
16
11
17
13
14
12
1.
15
Gimbal and Camera
A. Tele Camera
8.
Propellers
9.
Aircraft Status Indicators
B. Medium Tele Camera
10. Landing Gear (Built-in antennas)
C. Hasselblad Camera
11. Upward Vision System
2.
Horizontal Omnidirectional Vision
System
12. Intelligent Flight Battery
3.
Auxiliary Light
4.
Downward Vision System
5.
Infrared Sensing System
6.
Front LEDs
7.
Motors
13. Battery Level LEDs
14. Power Button
15. Battery Buckles
16. USB-C Port
17. Camera microSD Card Slot
© 2023 DJI All Rights Reserved.
13
DJI Mavic 3 Pro User Manual
DJI RC Pro
1
2
3
4
5
8
6
7
9
14
19
15
18
10
16 17
11 12 13
1.
Antennas
Transmit control and video wireless signals between the remote controller and the aircraft.
2.
Back/Function Button
Press once to return to the previous screen. Press twice to return to the home screen.
Use the back button in combinations with other buttons for additional functions. Refer to
the Remote Controller Button Combinations section for more information.
3.
Control Sticks
Use the control sticks to control the aircraft movements. Set the stick mode in DJI Fly. The
control sticks are removable and easy to store.
4.
Return to Home (RTH) Button
Press and hold to initiate RTH. Press again to cancel RTH.
5.
Flight Pause Button
Press once to make the aircraft brake and hover in place (only when GNSS or Vision Systems
are available).
6.
Flight Mode Switch
For switching between three flight modes: Switch between Cine, Normal, and Sport mode.
7.
5D Button
View and set the 5D button features in DJI Fly by entering Camera View > Settings > Control
> Button Customization.
8.
Power Button
Press once to check the current battery level. Press, and then press and hold to power the
remote controller on or off. When the remote controller is powered on, press once to turn
the touchscreen on or off.
9.
Confirm/Customizable C3 Button
Press once to confirm a selection. The button does not have a function by default when
using DJI Fly. Set the function in DJI Fly by entering Camera View > Settings > Control >
Button Customization.
14
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
10. Touchscreen
Touch the screen to operate the remote controller. Note that the touchscreen is not
waterproof. Operate with caution.
11. microSD Card Slot
For inserting a microSD card.
12. USB-C Port
For charging and connecting the remote controller to the computer.
13. Mini HDMI Port
For outputting HDMI signal to an external monitor.
14. Gimbal Dial
Controls the tilt of the camera.
15. Record Button
Press once to start or stop recording.
16. Status LED
Indicates the status of the remote controller.
17. Battery Level LEDs
Display the battery level of the remote controller.
18. Focus/Shutter Button
Press halfway down on the button to autofocus and press all the way down to take a photo.
Press once to switch to photo mode when in record mode.
19. Camera Control Dial
Control zoom in/out by default. Set the function in DJI Fly by entering Camera View >
Settings > Control > Button Customization.
© 2023 DJI All Rights Reserved.
15
DJI Mavic 3 Pro User Manual
20
21
24
23 22
25
20. Air Vent
For heat dissipation. Do not block the air vent during usage.
21. Control Sticks Storage Slot
For storing the control sticks.
22. Customizable C1 Button
Switch between recentering the gimbal and pointing the gimbal downward. Set the function
in DJI Fly by entering Camera View > Settings > Control > Button Customization.
23. Speaker
Outputs sound.
24. Customizable C2 Button
Press once to turn the auxiliary light on or off. Set the function in DJI Fly by entering Camera
View > Settings > Control > Button Customization.
25. Air Intake
For heat dissipation. Do not block the air intake during usage.
16
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
DJI RC Remote Controller
1
2
4
7
3
11
5
6
13
15
12
10
1.
9
14
8
Control Sticks
Use the control sticks to control the aircraft movements. Set the stick mode in DJI Fly. The
control sticks are removable and easy to store.
2.
Status LED
Indicates the status of the remote controller.
3.
Battery Level LEDs
Display the battery level of the remote controller.
4.
Flight Pause/RTH Button
Press once to make the aircraft brake and hover in place (only when GNSS or Vision Systems
are available). Press and hold to initiate RTH. Press again to cancel RTH.
5.
Flight Mode Switch
For switching between three flight modes: Switch between Cine, Normal, and Sport mode.
6.
Power Button
Press once to check the current battery level. Press, and then press and hold to power the
remote controller on or off. When the remote controller is powered on, press once to turn
the touchscreen on or off.
7.
Touchscreen
Touch the screen to operate the remote controller. Note that the touchscreen is not
waterproof. Operate with caution.
8.
USB-C Port
For charging and connecting the remote controller to the computer.
9.
microSD Card Slot
For inserting a microSD card.
10. Host Port (USB-C)
Reserved.
11. Gimbal Dial
Controls the tilt of the camera.
© 2023 DJI All Rights Reserved.
17
DJI Mavic 3 Pro User Manual
12. Record Button
Press once to start or stop recording.
13. Camera Control Dial
Control zoom in/out by default. Set the function in DJI Fly by entering Camera View >
Settings > Control > Button Customization.
14. Focus/Shutter Button
Press halfway down on the button to autofocus and press all the way down to take a photo.
Press once to switch to photo mode when in record mode.
15. Speaker
Outputs sound.
16
17
18
16. Control Sticks Storage Slot
For storing the control sticks.
17. Customizable C2 Button
Press once to turn the auxiliary light on or off. Set the function in DJI Fly by entering Camera
View > Settings > Control > Button Customization.
18. Customizable C1 Button
Switch between recentering the gimbal and pointing the gimbal downward. Set the function
in DJI Fly by entering Camera View > Settings > Control > Button Customization.
18
© 2023 DJI All Rights Reserved.
Flight Safety
This section describes safe flight
practices and flight restrictions.
© 2023 DJI All Rights Reserved.
19
DJI Mavic 3 Pro User Manual
Flight Safety
Once pre-flight preparation is complete, it is recommended to hone your flight skills and
practice flying safely. Pick a suitable area to fly in according to the following flight requirements
and restrictions. Make sure you understand and comply with the local laws and regulations
before flying. Read the Safety Guidelines before flight to ensure the safe use of the product.
Flight Environment Requirements
1.
DO NOT operate the aircraft in severe weather conditions, including wind speeds exceeding
12 m/s, snow, rain, and fog.
2.
Only fly in open areas. Tall buildings and large metal structures may affect the accuracy of
the onboard compass and GNSS system. It is recommended to keep the aircraft at least 5 m
away from structures.
3.
Avoid obstacles, crowds, trees, and bodies of water (recommended height is at least 3 m
above water).
4.
Minimize interference by avoiding areas with high levels of electromagnetism, such as
locations near power lines, base stations, electrical substations, and broadcasting towers.
5.
DO NOT take off from an altitude more than 6000 m (19,685 ft) above sea level. The
performance of the aircraft and its battery is limited when flying at high altitudes. Fly with
caution.
6.
The braking distance of the aircraft is affected by the flight altitude. The higher the altitude,
the greater the braking distance. When flying at an altitude above 3,000 m (9,843 ft), the
user should reserve at least 20 m of vertical braking distance and 25 m of horizontal braking
distance to ensure flight safety.
7.
GNSS cannot be used on the aircraft in polar regions. Use the vision system instead.
8.
DO NOT take off from moving objects, such as cars and ships.
9.
DO NOT use the aircraft, remote controller, battery, and battery charger near accidents,
fires, explosions, floods, tsunamis, avalanches, landslides, earthquakes, dust, or
sandstorms.
10. Use the battery charger in a temperature range of 5° to 40° C (41° to 104° F).
11. Operate the aircraft, battery, remote controller, and battery charger in a dry environment.
12. DO NOT use the battery charger in humid environments.
Operating the Aircraft Responsibly
To avoid serious injury and property damage, observe the following rules:
1.
Make sure you are NOT under the influence of anesthesia, alcohol, or drugs or suffering
from dizziness, fatigue, nausea, or other conditions that could impair the ability to operate
the aircraft safely.
2.
When landing, power off the aircraft first, then switch off the remote controller.
3.
DO NOT drop, launch, fire, or otherwise project any dangerous payloads on or at any
20
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
buildings, persons, or animals, which could cause personal injury or property damage.
4.
DO NOT use an aircraft that has been crashed or accidentally damaged or an aircraft that is
not in good condition.
5.
Make sure to train sufficiently and have contingency plans for emergencies or when an
incident occurs.
6.
Make sure to have a flight plan. DO NOT fly the aircraft recklessly.
7.
Respect the privacy of others when using the camera. Make sure to comply with local
privacy laws, regulations, and moral standards.
8.
DO NOT use this product for any reason other than general personal use.
9.
DO NOT use it for illegal or inappropriate purposes such as spying, military operations, or
unauthorized investigations.
10. DO NOT use this product to defame, abuse, harass, stalk, threaten, or otherwise violate
legal rights such as the right to privacy and publicity of others.
11. DO NOT trespass onto the private property of others.
Flight Restrictions
GEO (Geospatial Environment Online) System
DJI’s Geospatial Environment Online (GEO) System is a global information system that provides
real-time information on flight safety and restriction updates and prevents UAVs from flying in
restricted airspace. Under exceptional circumstances, restricted areas can be unlocked to allow
flights in. Prior to that, the user must submit an unlocking request based on the current restriction
level in the intended flight area. The GEO system may not fully comply with local laws and
regulations. Users shall be responsible for their own flight safety and must consult with the local
authorities on the relevant legal and regulatory requirements before requesting to unlock a flight
in a restricted area. For more information about the GEO system, visit https://fly-safe.dji.com.
Flight Limits
For safety reasons, flight limits are enabled by default to help users operate this aircraft safely.
Users can set flight limits on height and distance. Altitude limits, distance limits, and GEO zones
function concurrently to manage flight safety when GNSS is available. Only altitude can be
limited when GNSS is unavailable.
Flight Altitude and Distance Limits
Max altitude restricts an aircraft’s flight altitude, while max distance restricts an aircraft’s flight
radius around the Home Point. These limits can be changed in the DJI Fly app for improved
flight safety.
© 2023 DJI All Rights Reserved.
21
DJI Mavic 3 Pro User Manual
Max Altitude
Home Point
Max Distance
Height of aircraft
when taking off
Home Point not manually updated during flight
Strong GNSS Signal
Flight Restrictions
Prompt in DJI Fly App
Max Altitude
Altitude of the aircraft cannot exceed the value
Max flight altitude reached.
set in the DJI Fly app.
Max Distance
The straight-line distance from the aircraft to
the Home Point cannot exceed the max flight Max flight distance reached.
distance set in the DJI Fly app.
Weak GNSS Signal
Flight Restrictions
Prompt in DJI Fly App
• Height is restricted to 30 m from the takeoff
point if lighting is sufficient.
Max Altitude
• Height is restricted to 5 m above the ground
if lighting is not sufficient and the Infrared
Max flight altitude reached.
Sensing System is operating.
• Height is restricted to 30 m from the takeoff
point if lighting is not sufficient and the
Infrared Sensing System is not operating.
Max Distance
No limits
• The altitude limit when the GNSS is weak will not be restricted if there was a strong
GNSS signal (GNSS signal strength ≥ 2) when the aircraft was powered on.
• If an aircraft exceeds a specified limit, the pilot can still control the aircraft but cannot
fly any closer to the restricted area.
• For safety reasons, DO NOT fly the aircraft close to airports, highways, railway stations,
railway lines, city centers, or other sensitive areas. Only fly the aircraft within a visual
line of sight.
22
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
GEO Zones
DJI’s GEO system designates safe flight locations, provides risk levels and safety notices for
individual flights and offers information on restricted airspace. All restricted flight areas are
referred to as GEO Zones, which are further divided into Restricted Zones, Authorization Zones,
Warning Zones, Enhanced Warning Zones, and Altitude Zones. Users can view such information
in real-time in the DJI Fly app. GEO Zones are specific flight areas, including but not limited to
airports, large event venues, locations where public emergencies have occurred (such as forest
fires), nuclear power plants, prisons, government properties, and military facilities. By default,
the GEO system limits takeoffs and flights in zones that may cause safety or security concerns.
A GEO Zone map that contains comprehensive information on GEO Zones around the globe is
available on the official DJI website: https://fly-safe.dji.com/nfz/nfz-query.
Unlocking GEO Zones
To satisfy the needs of different users, DJI provides two unlocking modes: Self-Unlocking and
Custom Unlocking. Users may request on the DJI Fly Safe website.
Self-Unlocking is intended for unlocking Authorization Zones. To complete Self-Unlocking,
the user must submit an unlocking request via the DJI Fly Safe website at https://fly-safe.dji.
com. Once the unlocking request is approved, the user may synchronize the unlocking license
through the DJI Fly app. To unlock the zone, alternatively, the user may launch or fly the aircraft
directly into the approved Authorization Zone and follow the prompts in DJI Fly to unlock the
zone.
Custom Unlocking is tailored for users with special requirements. It designates user-defined
custom flight areas and provides flight permission documents specific to the needs of different
users. This unlocking option is available in all countries and regions and can be requested via
the DJI Fly Safe website at https://fly-safe.dji.com.
• To ensure flight safety, the aircraft will not be able to fly out of the unlocked zone after
entering it. If the Home Point is outside the unlocked zone, the aircraft will not be able
to return home.
Pre-Flight Checklist
1. Make sure the remote controller, mobile device, and Intelligent Flight Battery are fully
charged.
2. Make sure the Intelligent Flight Battery and the propellers are mounted securely.
3. Make sure the aircraft arms are unfolded.
4. Make sure the gimbal and camera are functioning normally.
5. Make sure that there is nothing obstructing the motors and that they are functioning
normally.
6. Make sure that the DJI Fly is successfully connected to the aircraft.
7. Make sure all camera lenses and sensors are clean.
© 2023 DJI All Rights Reserved.
23
DJI Mavic 3 Pro User Manual
8. Only use genuine DJI parts or DJI authorized parts. Unauthorized parts may cause system
malfunctions and compromise flight safety.
Basic Flight
Auto Takeoff/Landing
Auto Takeoff
Use the Auto Takeoff function:
1. Launch DJI Fly and enter the camera view.
2. Complete all steps in the pre-flight checklist.
3. Tap
. If conditions are safe for takeoff, press and hold the button to confirm.
4. The aircraft will take off and hover approx. 1.2 m (3.9 ft) above the ground.
Auto Landing
Use the Auto Landing function:
1. Tap
. If conditions are safe for landing, press and hold the button to confirm.
2. Auto landing can be cancelled by tapping
.
3. If the Downward Vision System is working normally, Landing Protection will be enabled.
4. Motors will stop automatically after landing.
• Choose the proper place for landing.
Starting/Stopping the Motors
Starting the Motors
Perform the Combination Stick Command (CSC) as shown below to start the motors. Once the
motors start spinning, release both sticks simultaneously.
OR
Stopping the Motors
The motors can be stopped in two ways:
Method 1: When the aircraft has landed, push the throttle stick down and hold until the motors
stop.
Method 2: When the aircraft has landed, perform the same CSC used to start the motors until
the motors stop.
24
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
OR
Method 1
Method 2
Stopping the Motors Mid-Flight
Stopping motors mid-flight will cause the aircraft to crash. The motors should only be stopped
mid-flight in an emergency situation such as if the aircraft is involved in a collision, a motor
has stalled, the aircraft is rolling in the air, or the aircraft is out of control and is ascending or
descending very quickly. To stop the motors mid-flight, perform the same CSC that was used to
start the motors for two seconds. The default setting can be changed in DJI Fly.
© 2023 DJI All Rights Reserved.
25
DJI Mavic 3 Pro User Manual
Controlling the Aircraft
The control sticks of the remote controller can be used to control the aircraft movements. The
control sticks can be operated in Mode 1, Mode 2, or Mode 3, as shown below. The default
control mode of the remote controller is Mode 2. Refer to the Remote Controller section for
more details.
Mode 1
Left Stick
Right Stick
Forward
Up
Down
Backward
Turn Left
Left
Turn Right
Right
Mode 2
Left Stick
Right Stick
Up
Forward
Down
Backward
Turn Left
Left
Turn Right
Right
Mode 3
Left Stick
Right Stick
Forward
Up
Down
Backward
Left
26
© 2023 DJI All Rights Reserved.
Right
Turn Left
Turn Right
DJI Mavic 3 Pro User Manual
Takeoff/Landing Procedures
1. Place the aircraft in an open, flat area with the aircraft rear facing towards the user.
2. Power on the remote controller and the aircraft.
3. Launch DJI Fly and enter the camera view.
4. Tap Settings > Safety, and then set the Obstacle Avoidance Action to Bypass or Brake. Make
sure to set an appropriate Max Altitude and RTH Altitude.
5. Wait for the aircraft self-diagnostics to complete. If DJI Fly does not show any irregular
warning, the user can start the motors.
6. Push the throttle stick up slowly to takeoff.
7. To land, hover over a level surface and push the throttle stick down to descend.
8. After landing, push the throttle down and hold until the motors stop.
9. Power off the aircraft before the remote controller.
Video Suggestions and Tips
1. The pre-flight checklist is designed to help the user fly safely and shoot videos during flight.
Go through the full pre-flight checklist before each flight.
2. Select the desired gimbal operation mode.
3. It is recommended to take photos or record videos when flying in Normal or Cine mode.
4. DO NOT fly in bad weather such as on rainy or windy days.
5. Choose the camera settings that best suit your needs.
6. Perform flight tests to establish flight routes and preview scenes.
7. Push the control sticks gently to ensure smooth and stable movement of the aircraft.
• Make sure to place the aircraft on a flat and steady surface before takeoff. DO NOT
launch the aircraft from your palm or while holding it with your hand.
© 2023 DJI All Rights Reserved.
27
DJI Mavic 3 Pro User Manual
Intelligent Flight Modes
FocusTrack
FocusTrack includes Spotlight, Point of Interest, and ActiveTrack.
• Refer to the Remote Controller and Controlling the Aircraft sections for more information about the roll, pitch, throttle, and yaw control sticks.
• FocusTrack is not available when used with the DJI goggles.
Spotlight
Description Control the aircraft manually while the camera
remains locked on the subject.
Supported
Subjects
Control
Obstacle
Avoidance
Point of Interest (POI)
ActiveTrack
The aircraft tracks the subject in a circle
based on the set radius and flight speed.
The max flight speed is 12 m/s and the
flight speed may be adjusted dynamically
according the actual radius.
The aircraft keeps a certain distance
and altitude from the tracked subject,
and there are two modes: Trace and
Parallel.
The max flight speed is 12 m/s.
• Stationary subjects
• Moving subjects such as vehicles, boats, and people
Using the control sticks to move the aircraft:
• Move the roll stick to circle the subject
• Move the pitch stick to alter the distance from
the subject
• Move the throttle stick to change the altitude
• Move the yaw stick to adjust the frame
• Moving subjects such as vehicles,
boats, and people
Using the control sticks to move the aircraft: Using the control sticks to move the
• Move the roll stick to change the circling
aircraft:
speed of the aircraft around the subject
Move the roll stick to circle the subject
• Move the pitch stick to alter the distance
Move the pitch stick to alter the
from the subject
distance from the subject
• Move the throttle stick to change the
Move the throttle stick to change the
altitude
altitude
• Move the yaw stick to adjust the frame
Move the yaw stick to adjust the frame
When the vision systems are working normally, The aircraft will bypass obstacles regardless of the flight modes or obstacle
the aircraft will hover if an obstacle is detected, avoidance action settings in DJI Fly when the vision systems are working normally.
regardless of whether the obstacle avoidance
action is set to Bypass or Brake in DJI Fly.
Note: obstacle avoidance is disabled in Sport mode.
© 2023 DJI All Rights Reserved.
28
DJI Mavic 3 Pro User Manual
ActiveTrack
Trace
Parallel
After setting the tracking direction (the
default direction is Back), the aircraft tracks
the subject as its moving direction, and
the orientation towards the subject keeps
constant as the tracking direction.
The aircraft tracks the subject at a constant
angle and distance from the side as the
tracking starts.
(Take Right Follow as an example)
(Take East Follow as an example)
• In Trace mode, the direction setting is only available when the subject is moving in a
stable direction. The direction of tracking can be adjusted during tracking.
In ActiveTrack, the supported follow ranges of the aircraft and subject are as follows:
Subject
People
Vehicles/Boats
Camera
Hasselblad Camera
Medium Tele
Camera
Distance
4-20 m
(Optimal: 5-10 m)
7-20 m
Altitude
2-20 m (Optimal: 2-10 m)
Hasselblad Camera
Medium Tele
Camera
6-100 m
(Optimal: 20-50 m)
16-100 m
6-100 m (Optimal: 10-50 m)
• The aircraft will fly to the supported distance and altitude range if the distance and
altitude is out of range when ActiveTrack begins. Fly the aircraft at the optimal distance
and altitude for the best performance.
© 2023 DJI All Rights Reserved.
29
DJI Mavic 3 Pro User Manual
Using FocusTrack
1. Takeoff.
2. Drag-select the subject in the camera view, or enable Subject Scanning under Control
settings in DJI Fly and tap the recognized subject to enable FocusTrack.
• FocusTrack must be used within the supported zoom ratio as follows, otherwise it will
affect subject recognition:
a. Spotlight/Point of Interest: the Hasselblad camera and medium tele camera support
moving subjects such as vehicles, boats, people, and stationary subjects. The tele
camera only supports stationary subjects.
b. ActiveTrack: supports moving subjects such as vehicles, boats, and people up to 3x zoom.
a. The aircraft will enter Spotlight by default.
b. Tap on the bottom of the screen to switch to Point of Interest. After setting the direction
and speed, tap GO to start flying.
30
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
c. Tap on the bottom of the screen to switch to ActiveTrack. In Trace mode, the tracking
direction can be changed using the direction wheel (Front, Back, Left, Right, Front
Diagonal Left, Front Diagonal Right, Back Diagonal Left, and Back Diagonal Right). The
direction wheel will be minimized if there is no operation for an extended period or any
other area of the screen is tapped.
Swipe the mode icon left or right to switch between Trace or Parallel once the direction
wheel is minimized. The tracking direction will be reset to back once Trace is selected
again. Tap GO to start tracking.
3. Tap the shutter/record button to take photos or start recording. View the footage in Playback
.
Exiting FocusTrack
In Point of Interest or ActiveTrack, press the Flight Pause button once on the remote controller
or tap Stop on the screen to return to Spotlight.
In Spotlight, press the Flight Pause button once on the remote controller to exit FocusTrack.
• DO NOT use FocusTrack in areas with people and animals running or vehicles moving.
• DO NOT use FocusTrack in areas with small or fine objects (e.g., tree branches or power
lines), or transparent objects (e.g., water or glass).
• In an emergency, press the Flight Pause button or tap Stop in DJI Fly to manually fly the
aircraft.
• Be extra vigilant when using FocusTrack in any of the following situations:
a. The tracked subject is not moving on a level plane.
b. The tracked subject changes shape drastically while moving.
c. The tracked subject is out of sight for an extended period.
d. The tracked subject is moving on a snowy surface.
e. The tracked subject has a similar color or pattern to its surrounding environment.
f. The lighting is extremely low (<300 lux) or high (>10,000 lux).
• Make sure to follow local privacy laws and regulations when using FocusTrack.
• It is recommended to only track vehicles, boats, and people. Fly with caution when
tracking other subjects.
© 2023 DJI All Rights Reserved.
31
DJI Mavic 3 Pro User Manual
• In supported moving subjects, vehicles and boats refer to cars and small to mediumsized yachts. DO NOT track a remotely controlled model car or boat.
• The tracking subject may inadvertently swap to another subject if they pass by each other.
• FocusTrack is disabled in Explore mode, or when recording in 5.1K and 120fps and
above, and Apple ProRes 422HQ/422/422LT.
• When lighting is insufficient and the vision systems are unavailable, Spotlight and POI
can still be used for static subjects, but obstacle sensing will be unavailable. ActiveTrack
can not be used.
• FocusTrack is unavailable when the aircraft is on the ground.
• FocusTrack may not function properly when the aircraft is flying near flight limits or in a
GEO Zone.
• FocusTrack is unavailable when used with DJI Goggles.
MasterShots
MasterShots keeps the subject at the center of the frame while executing different maneuvers
in sequence to generate a short cinematic video.
Using MasterShots
1. Launch the aircraft and make it hover at least 2 m (6.6 ft) above ground.
2m
2. In DJI Fly, tap the shooting mode icon to select MasterShots and read the instructions.
Make sure you understand how to use the shooting mode and there are no obstacles in the
surrounding area.
3. Drag-select your target subject in the camera view, set the flight range. Tap Start to begin
recording. The aircraft will fly back to its original position once shooting is finished.
4. Tap
32
to access the video.
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Exiting MasterShots
Press the flight pause button once or tap
and hover.
in DJI Fly to exit MasterShots. The aircraft will brake
• Use MasterShots at locations that are clear of buildings and other obstacles. Make sure
there are no humans, animals, or other obstacles in the flight path. When the lighting is
sufficient and the environment is suitable for vision systems, the aircraft will brake and
hover in place if there is an obstacle detected.
• Pay attention to objects around the aircraft and use the remote controller to avoid
collisions with the aircraft.
• DO NOT use MasterShots in any of the following situations:
a. When the subject is blocked for an extended period or outside the line of sight.
b. When the subject is similar in color or pattern with the surroundings.
c. When the subject is in the air.
d. When the subject is moving fast.
e. When the lighting is extremely low (<300 lux) or high (>10,000 lux).
• DO NOT use MasterShots in places close to buildings or where the GNSS signal is weak,
otherwise the flight path may become unstable.
• Make sure to follow local privacy laws and regulations when using MasterShots.
QuickShots
QuickShots shooting modes include Dronie, Rocket, Circle, Helix, Boomerang, and Asteroid.
Dronie: The aircraft flies backward and ascends with the camera locked on the subject.
Rocket: The aircraft ascends with the camera pointing downward.
Circle: The aircraft circles around the subject.
Helix: The aircraft ascends and spirals around the subject.
Boomerang: The aircraft flies around the subject in an oval path, ascending as it flies
away from its starting point and descending as it flies backward. The starting point of the
aircraft forms one end of the long axis of the oval, while the other end is at the opposite
side of the subject from the starting point.
Asteroid: The aircraft flies backward and upward, takes several photos, and then flies
back to the starting point. The video generated starts with a panorama of the highest
position and then shows the view from the aircraft as it descends.
• Make sure there is sufficient space when using Boomerang. Allow a radius of at least
30 m (99 ft) around the aircraft and a space of at least 10 m (33 ft) above the aircraft.
• Make sure there is sufficient space when using Asteroid. Allow at least 40 m (131 ft)
behind and 50 m (164 ft) above the aircraft.
© 2023 DJI All Rights Reserved.
33
DJI Mavic 3 Pro User Manual
Using QuickShots
1. Launch the aircraft and make it hover at least 2 m (6.6 ft) above ground.
2m
2. In DJI Fly, tap the shooting mode icon to select QuickShots and follow the prompts. Make
sure you understand how to use the shooting mode and there are no obstacles in the
surrounding area.
3. Choose a shooting mode, drag-select your target subject in the camera view, and tap Start
to begin recording. The aircraft will fly back to its original position once shooting is finished.
4. Tap
to access the video.
Exiting QuickShots
Press the flight pause button once or tap
in DJI Fly to exit QuickShots. The aircraft will brake
and hover. Tap the screen again and the aircraft will continue shooting.
Note: if you accidentally move a control stick, the aircraft will exit QuickShots and hover in place.
• Use QuickShots at locations that are clear of buildings and other obstacles. Make sure
there are no humans, animals, or other obstacles in the flight path. When the lighting is
sufficient and the environment is suitable for vision systems, the aircraft will brake and
hover in place if there is an obstacle detected.
• Pay attention to objects around the aircraft and use the remote controller to avoid
collisions with the aircraft.
• DO NOT use QuickShots in any of the following situations:
a. When the subject is blocked for an extended period or outside the line of sight.
b. When the subject is more than 50 m away from the aircraft.
34
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
c. When the subject is similar in color or pattern with the surroundings.
d. When the subject is in the air.
e. When the subject is moving fast.
f. When the lighting is extremely low (<300 lux) or high (>10,000 lux).
• DO NOT use QuickShots in places close to buildings or where the GNSS signal is weak,
otherwise the flight path will become unstable.
• Make sure to follow local privacy laws and regulations when using QuickShots.
Hyperlapse
Hyperlapse shooting modes include Free, Circle, Course Lock, and Waypoint.
Free
The aircraft automatically takes photos and generates a timelapse video. Free mode can be
used while the aircraft is on the ground. After takeoff, control the aircraft’s movements and
gimbal angle using the remote controller.
Follow the steps below to use Free:
1. Set the interval time, video duration, and max speed. The screen displays the number of
photos that will be taken and the shooting duration.
2. Tap the shutter/record button to begin.
Circle
The aircraft automatically takes photos while flying around the selected subject to generate a
timelapse video.
Follow the steps below to use Circle:
1. Set the interval time, video duration, and max speed. Circle can be set to either the clockwise
or counter-clockwise direction. The screen displays the number of photos that will be taken
and the shooting duration.
2. Drag-select a subject on the screen. Use the yaw stick and gimbal dial to adjust the frame.
© 2023 DJI All Rights Reserved.
35
DJI Mavic 3 Pro User Manual
3. Tap the shutter/record button to begin.
Course Lock
Course Lock allows the user to fix the flight direction. When using Course Lock, the user may
either select an object so that the camera will always face the subject or not select an object so
that the user can control the aircraft orientation and gimbal.
Follow the steps below to operate Course Lock:
1. Set the interval time, video duration, and speed. The screen displays the number of photos
that will be taken and the shooting duration.
2. Set a flight direction.
3. If applicable, drag-select a subject. After selecting the subject, the aircraft will automatically
control the orientation or gimbal to center the subject. At this time, the frame cannot be
adjusted manually.
4. Tap the shutter/record button to begin.
Waypoints
The aircraft automatically takes photos on a flight path of two to five waypoints and generates a
timelapse video. The aircraft can fly in sequence from waypoints 1 to 5 or 5 to 1. The aircraft will
not respond to the remote controller stick movements during flight.
Follow the steps below to use Waypoints:
1. Set the desired waypoints and the lens direction.
2. Set the interval time and video duration. The screen displays the number of photos that will
be taken and the shooting duration.
3. Tap the shutter/record button to begin.
The aircraft will generate a timelapse video automatically, which is viewable in playback. Users
can select Photo Type in Settings > Camera page in DJI Fly.
• For optimal performance, it is recommended to use Hyperlapse at an altitude higher
than 50 m and to set a difference of at least two seconds between the interval and
shutter time.
• It is recommended to select a static subject (e.g., high-rise buildings, mountainous
terrain) located at a safe distance from the aircraft (further than 15 m). DO NOT select a
subject that is too near the aircraft.
• When the lighting is sufficient and the environment is suitable for the vision systems,
the aircraft will brake and hover in place if an obstacle is detected during Hyperlapse.
If the lighting becomes insufficient or the environment is not suitable for the vision
systems during Hyperlapse, the aircraft will continue to shoot without obstacle
avoidance. Fly with caution.
• The aircraft will only generate a video after at least 25 photos have been taken, which
is the amount required to generate a one-second video. The video will be generated by
default regardless of whether Hyperlapse concludes normally or the aircraft exits from
the mode unexpectedly (such as when Low Battery RTH is triggered).
36
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Waypoint Flight
Waypoint Flight enables the aircraft to capture images during a flight according to the waypoint
flight route generated by the preset waypoints. Points of Interest (POI) can be linked to the
waypoints. The heading will point toward the POI during flight. A waypoint flight route can be
saved and repeated.
Using Waypoint Flight
1. Enable Waypoint Flight
Tap
on the left of the camera view in DJI Fly to enable Waypoint Flight.
2. Waypoint Settings
Pin Waypoint
Waypoints can be pinned via the map before take off.
Waypoints can be pinned via the following methods after take off, GNSS is required.
•
Using the Remote Controller: press once on the C1 button to pin a waypoint.
•
Using the Operation Panel: tap
•
Using the Map: enter and tap on the map to pin a waypoint. The default altitude of a
waypoint via the map is set to 50 m from the take-off point.
on the operation panel to pin a waypoint.
Tap and hold on a waypoint to move its position on the map.
• It is recommended to pin waypoints when flying to the location for a more accurate
and smoother imaging result.
• The aircraft horizontal GNSS position, altitude from the take-off point, heading, and
gimbal tilt will be recorded if the waypoint is pinned via the remote controller and
operation panel.
• Connect the remote controller to the internet and download the map before using
the map to pin a waypoint. When the waypoint is pinned via the map, only the
aircraft horizontal GNSS position can be recorded.
• The flight route will curve between waypoints, and the aircraft altitude may decrease
during the flight route. Make sure to avoid any obstacles below when setting a waypoint.
© 2023 DJI All Rights Reserved.
37
DJI Mavic 3 Pro User Manual
Settings
Tap the waypoint number for settings, the waypoint parameters are described as follows:
Camera
Action
The camera action at the waypoint. Choose between None, Take Photo, and
Start or Stop Recording.
Altitude
The altitude at the waypoint from the take-off point. Ensure to take off at the
same take-off altitude to obtain better performance when a Waypoint Flight
is repeated.
Speed
The flight speed at the waypoint.
• Global Speed: the aircraft will fly at the same speed during the waypoint
flight route.
• Custom: the aircraft will accelerate or decelerate at a steady speed when
flying between waypoints. The preset speed will be reached when the
aircraft is at the waypoint.
Heading
The aircraft heading at the waypoint.
• Follow Course: the heading of the aircraft at a horizontal tangent to the
flight route.
• POI*: tap the number of the POI to point the aircraft heading toward the POI.
• Manual: the aicraft heading can be adjusted by the user during a
Waypoint Flight.
• Custom: drag the bar to adjust the heading. The heading can be
previewed in the map view.
Gimbal Tilt
The gimbal tilt at the waypoint.
• POI*: tap the POI number to point the camera toward the specific POI.
• Manual: the gimbal tilt can be adjusted by the user during a Waypoint
Flight.
• Custom: drag the bar to adjust the tilt of the gimbal.
Zoom
•
•
•
•
38
The camera zoom at the waypoint.
Digital (1-3x): drag the bar to adjust the zoom ratio.
Manual: the zoom ratio can be adjusted by the user during a Waypoint
Flight.
Auto: the zoom ratio will be adjusted by the aircraft when flying between
two waypoints.
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Hovering
Time
The duration of the aircraft hovering time at the current waypoint.
* Before selecting POI for heading or gimbal tilt, make sure there are POIs in the flight route. If a POI is
linked to a waypoint, the heading and gimbal tilt of the waypoint will be reset to toward the POI.
All the settings except camera action can be applied to all waypoints after selecting Apply to
All. Tap to delete the current selected waypoint.
3. POI Settings
Tap POI on the operation panel to switch to POI settings. Use the same method to pin a POI
as used with a waypoint.
Tap the number of the POI to set the altitude of the POI, the POI can be linked to a waypoint.
Multiple waypoints can be linked to the same POI, the camera will point toward the POI
during the Waypoint Flight.
4. Plan a Waypoint Flight
Tap
or Next to set parameters for the flight route such as Global Speed, the behavior of
End of Flight, On Signal Lost, and Start Point. The settings apply to all waypoints.
Global Speed
The flight speed during the entire flight route. After setting, the speed of
all waypoints will be set to this speed.
End of Flight
The behavior of the aircraft after the flight task ends. It can be set to
Hover, RTH, Land, or Back to Start.
On Signal Lost
The behavior of the aircraft when the remote controller signal is lost
during flight. It can be set to RTH, Hover, Land, or Continue.
Start Point
After selecting the start waypoint, the flight route will be started from this
waypoint to the subsequent waypoints.
5. Perform a Waypoint Flight
• Check the Obstacle Avoidance Action settings in the Settings > Safety page of DJI Fly before
performing the Waypoint Flight. When set to Bypass or Brake, the aircraft will brake and
hover in place if an obstacle is detected during the Waypoint Flight. The aircraft cannot
sense obstacles if the Obstacle Avoidance Action is disabled. Fly with caution.
• Observe the environment and ensure there are no obstacles on the route before
performing Waypoint Flight.
• Make sure to maintain visual line of sight (VLOS) with the aircraft. Press the flight
pause button in an emergency situation.
• When the signal is lost during flight, the aircraft will perform the action set in On
Signal Lost.
• When the Waypoint Flight is finished, the aircraft will perform the action set in End
of Flight.
© 2023 DJI All Rights Reserved.
39
DJI Mavic 3 Pro User Manual
a. Tap GO to upload the waypoint flight task. Tap
return to the waypoint flight parameter settings.
to cancel the uploading process and
b. The waypoint flight task will be performed after being uploaded, the flight duration,
waypoints, and distance and will be displayed on the camera view. The control stick input
will change the flight speed during a Waypoint Flight.
c. Tap
to pause the Waypoint Flight after the task begins. Tap
to continue the
Waypoint Flight. Tap
to stop Waypoint Flight and return to the waypoint flight edit
status.
6. Library
When planning a Waypoint Flight, the task will be generated automatically and saved every
minute. Tap on the left to enter Library and save the task manually.
•
In the flight route library, users can check the saved tasks, and tap to open or edit a task.
•
Tap
•
Slide left to delete a task.
•
Tap the icon on the top right corner to change the order of the tasks.
to edit the name of the task.
: tasks will be sorted by the time.
: tasks will be sorted by the distance between the start waypoint and the current
position of the aircraft from shortest to farthest.
7. Exit Waypoint Flight
Tap
40
to exit Waypoint Flight. Tap Save and Exit to save the task to Library and exit.
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Cruise Control
The cruise control function enables the aircraft to lock the current control stick input of the
remote controller when conditions permit. Fly at the speed corresponding to the current control
stick input without continually using control stick movements. The cruise control feature also
supports aircraft movements such as spiraling up by increasing the control stick input.
Using Cruise Control
1. Set the Cruise Control Button
Go to DJI Fly, select Settings > Control > Button Customization, and then set the C1, C2 or C3
button to Cruise Control.
2. Enter Cruise Control
•
Press the Cruise Control button while pushing the control stick, then the aircraft will fly
at the current speed according to the control stick input. Once Cruise Control is set, the
control stick can be released and will automatically return to the center.
•
Before the control stick returns to the center, press the Cruise Control button again to
reset the flight speed based on the current control stick input.
•
Push the control stick after it returns to the center, the aircraft will fly at the increased
speed based on the previous speed. In this case, press the Cruise Control button again,
and the aircraft will fly at the increased speed.
3. Exit Cruise Control
Press the Cruise Control button without a control stick input, press the flight pause button
on the remote controller, or tap
on the screen to exit cruise control. The aircraft will brake
and hover.
• Cruise control is available in Normal, Cine, and Sport mode or APAS, Free
Hyperlapse, and FocusTrack.
• Cruise control cannot be started without a control stick input.
• The aircraft cannot enter or will exit Cruise Control in the following situations:
a. When near the max altitude or max distance.
b. When the aircraft disconnects from the remote controller or DJI Fly.
c. When the aircraft senses an obstacle and will hover in place.
d. During RTH or auto landing.
• Cruise control will exit automatically when switching flight modes.
• The obstacle sensing in Cruise Control follows the current flight mode. Fly with
caution.
© 2023 DJI All Rights Reserved.
41
Aircraft
DJI Mavic 3 Pr o conta ins a flight
controller, video downlink system,
vision systems, infrared sensing system,
propulsion system, and an Intelligent
Flight Battery.
42
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Aircraft
DJI Mavic 3 Pro contains a flight controller, video downlink system, vision systems, infrared
sensing system, propulsion system, and an Intelligent Flight Battery.
Flight Modes
DJI Mavic 3 Pro supports the following flight modes. The flight modes can be switched via the
Flight Mode switch on the remote controller.
Normal Mode
The aircraft utilizes GNSS, the Horizontal, Upward, and Downward Vision Systems, and the
Infrared Sensing System to locate and stabilize itself. When the GNSS signal is strong, the
aircraft uses GNSS to locate and stabilize itself. When the GNSS is weak, but the lighting and
other environmental conditions are sufficient, it uses the vision systems. When the vision
systems are enabled, and lighting and other environmental conditions are sufficient, the
maximum tilt angle is 30° and the maximum flight speed is 15 m/s.
Sport Mode
In Sport Mode, the aircraft uses GNSS for positioning and the aircraft responses are optimized
for agility and speed, making it more responsive to control stick movements. Note: Obstacle
Avoidance is disabled and the maximum flight speed is 21 m/s.
Cine Mode
Cine mode is based on Normal mode with a limited flight speed, making the aircraft more stable
during shooting.
If the aircraft is flying in the EU, the aircraft will switch to Low Speed mode when the flight mode
is switched to C on the remote controller. Low Speed mode limits the maximum horizontal flight
speed to 2.8 m/s based on Normal mode, and there is no limit for the ascent or descent speed.
The aircraft automatically changes to Attitude (ATTI) mode when the vision systems are
unavailable or disabled and when the GNSS signal is weak or the compass experiences
interference. In ATTI mode, the aircraft may be more easily affected by its surroundings.
Environmental factors such as wind can result in horizontal shifting, which may present
hazards, especially when flying in confined spaces. The aircraft will not be able to hover or
brake automatically. Therefore the pilot should land the aircraft as soon as possible to avoid
accidents.
• The flight modes are only valid for manual flight and cruise control.
• The vision systems are disabled in Sport mode, which means the aircraft cannot sense
obstacles on its route automatically. The user must stay alert to the surrounding
environment and control the aircraft to avoid obstacles.
• The maximum speed and braking distance of the aircraft significantly increase in Sport
mode. A minimum braking distance of 30 m is required in windless conditions.
© 2023 DJI All Rights Reserved.
43
DJI Mavic 3 Pro User Manual
• A minimum braking distance of 10 m is required in windless conditions while the
aircraft is ascending and descending in Sport mode or Normal mode.
• The responsiveness of the aircraft significantly increases in Sport mode, which means a
small control stick movement on the remote controller translates into the aircraft moving
a large distance. Make sure to maintain adequate maneuvering space during flight.
Aircraft Status Indicators
DJI Mavic 3 Pro has front LEDs and aircraft status indicators.
Front LED
Front LED
Aircraft Status Indicator
Aircraft Status Indicator
When the aircraft is powered on but the motors are not running, the front LEDs glow solid red
to display the orientation of the aircraft.
When the aircraft is powered on, but the motors are not running, the aircraft status indicators
will display the current status of the flight control system. Refer to the table below for more
information about the aircraft status indicators.
Aircraft Status Indicators Descriptions
Normal States
×4
×2
Blinks red, yellow, and green
alternately
Powering on and performing self-diagnostic
tests
Blinks yellow four times
Warming up
Blinks green slowly
GNSS enabled
Blinks green twice repeatedly
Vision systems enabled
Blinks yellow slowly
GNSS and vision systems disabled (ATTI
mode enabled)
Warning States
—
Blinks yellow quickly
Remote controller signal lost
Blinks red slowly
Takeoff is disabled, e.g. low battery*
Blinks red quickly
Critically low battery
Solid red
Critical error
Blinks red and yellow alternately Compass calibration required
* If the aircraft cannot takeoff while the status indicators are blinking red slowly, launch DJI Fly on the remote
controller to view the details.
44
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
After the motors start, the front LEDs blink red and green alternately, and the aircraft status
indicators blink green. The green lights indicate the aircraft is a UAV and the red lights indicate
the heading and position of the aircraft.
• To obtain better footage, the front LEDs turn off automatically when shooting if the
front LEDs are set to auto in DJI Fly. Lighting requirements vary depending on the
region. Observe local laws and regulations.
Return to Home
Return to Home (RTH) brings the aircraft back to the last recorded Home Point when the
positioning system is functioning normally. There are three types of RTH: Smart RTH, Low
Battery RTH, and Failsafe RTH. The aircraft automatically flies back to the Home Point and lands
when Smart RTH is initiated, the aircraft enters Low Battery RTH, or the signal between the
remote controller and the aircraft is lost during flight.
GNSS
Home
Point
10
Description
The first location where the aircraft receives a strong to moderately strong
GNSS signal (indicated by a white icon) will be recorded as the default
Home Point. The Home Point can be updated before takeoff as long as the
aircraft receives another strong to moderately strong GNSS signal. If the
signal is weak, the Home Point will not be updated. After the Home Point is
recorded, a prompt will appear in DJI Fly.
If it is necessary to update the Home Point during a flight (such as where
the position of the user has changed), the Home Point can be manually
updated in Settings > Safety page in DJI Fly.
During RTH, if the video transmission signal is normal, the AR Home Point, AR RTH route, and
AR aircraft shadow will be displayed in the camera view by default. This improves the flight
experience by helping users view the RTH route and Home Point and avoid obstacles on the
route. The display can be changed in System Settings > Safety > AR Settings.
• The AR RTH route is only used for reference, and may deviate from the actual flight
route in different scenarios. Always pay attention to the live view on the screen during
RTH. Fly with caution.
• During Advanced RTH, the aircraft will automatically adjust the gimbal tilt to point the
camera toward the RTH route by default. Use the gimbal dial to adjust the camera
orientation or press the customizable buttons on the remote controller to recenter
the camera will stop the aircraft from automatically adjusting the gimbal tilt, which
may prevent the AR RTH route from being viewed. The gimbal tilt will not be adjusted
automatically during Straight Line RTH
• When reaching the Home Point, the aircraft will automatically adjust the gimbal tilt
vertically down.
• AR aircraft shadow is only displayed when the aircraft is 0.5-15 m above the ground.
© 2023 DJI All Rights Reserved.
45
DJI Mavic 3 Pro User Manual
Smart RTH
If the GNSS signal is sufficiently strong, Smart RTH can be used to bring the aircraft back to the
Home Point. Smart RTH is initiated either by tapping
in DJI Fly or by pressing and holding the
RTH button on the remote controller until it beeps. Exit Smart RTH by tapping
in DJI Fly or by
pressing the RTH button on the remote controller. After exiting RTH, users will regain control of
the aircraft.
Advanced RTH
Advanced RTH is enabled if the lighting is sufficient and the environment is suitable for vision
systems when Smart RTH is triggered. The aircraft will automatically plan the best RTH path,
which will be displayed in DJI Fly and will adjust according to the environment.
RTH Settings
RTH settings are available for Advanced RTH. Go to the camera view in DJI Fly, tap System >
Safety, and then RTH.
1. Optimal: regardless of the RTH Altitude settings, the aircraft automatically plans the optimal
RTH path and adjusts the altitude according to environmental factors such as obstacles
and transmission signals. The optimal RTH path means the aircraft will travel the shortest
distance possible, reducing the amount of battery power used and increasing flight time.
46
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
2. Preset: if the aircraft is further than 50 m from the Home Point when RTH begins, the aircraft
will plan the RTH path, fly to an open area while avoiding obstacles, ascend to the RTH
Altitude, and return to home using the best path.
When the aircraft is at a distance of 5 to 50 m from the home point when RTH begins, the
aircraft will not ascend to the RTH Altitude and instead return to home using the best path at
the current altitude.
When the aircraft is near the Home Point, the aircraft will descend while flying forward if the
current altitude is higher than the RTH Altitude.
Advanced RTH Procedure
1. The Home Point is recorded.
2. Advanced RTH is triggered.
3. The aircraft brakes and hover in place.
a. The aircraft lands immediately if it is less than 5 m from the Home Point when RTH
begins.
b. If the aircraft is farther than 5 m from the home point when RTH begins, the aircraft will
plan the best path according to the RTH settings and fly to the Home Point while sensing
obstacles and avoiding GEO zones. The aircraft front will always point in the same
direction as the flight direction.
4. The aircraft will fly automatically according to the RTH settings, environment, and
transmission signal during RTH.
5. The aircraft lands and the motors stop after reaching the Home Point.
Straight Line RTH
The aircraft will enter Straight Line RTH when the lighting is not sufficient and the environment
is not suitable for Advanced RTH.
Straight Line RTH Procedure:
1. The Home Point is recorded.
2. Straight Line RTH is triggered.
3. The aircraft brakes and hover in place.
a. If the aircraft is farther than 50 m from the Home Point when RTH begins, the aircraft
first ascends to a height of 20 m (this step is skipped if the current height is higher than
20 m), then the aircraft adjusts its orientation and ascends to the preset RTH altitude and
flies to the Home Point. If the current altitude is higher than the RTH altitude, the aircraft
will fly to the Home Point at the current altitude.
© 2023 DJI All Rights Reserved.
47
DJI Mavic 3 Pro User Manual
b. If the aircraft is at a distance of 5 to 50 m from the Home Point when RTH begins, the
aircraft adjusts its orientation and flies to the Home Point at the current altitude. If the
current altitude is lower than 2 m when RTH begins, the aircraft will ascend to 2 m and
flies back to the Home Point.
c. The aircraft lands immediately if it is less than 5 m from the Home Point when RTH
begins.
4. The aircraft lands and the motors stop after reaching the Home Point.
• During Advanced RTH, the aircraft will adjust the flight speed automatically to suit
environmental factors such as wind speed and obstacles.
• The aircraft cannot avoid small or fine objects such as tree branches or power lines. Fly
the aircraft to an open area before using Smart RTH.
• Set Advanced RTH as Preset if there are power lines or towers that the aircraft cannot
avoid on the RTH path and make sure the RTH Altitude is set higher than all obstacles.
• The aircraft will brake and return to home according to the latest settings if the RTH
settings are changed during RTH.
• If the max altitude is set below the current altitude during RTH, the aircraft will descend
to the max altitude and return to home.
• The RTH Altitude cannot be changed during RTH.
• If there is a large difference in the current altitude and the RTH altitude, the amount
of battery power used cannot be calculated accurately due to wind speeds at different
altitudes. Pay extra attention to the battery power and warning prompts in DJI Fly.
• Advanced RTH will not be available if the lighting condition and environment are not
suitable for vision systems during takeoff or RTH.
• During Advanced RTH, the aircraft will enter Straight Line RTH if the lighting condition
and environment are not suitable for vision systems and the aircraft cannot sense
obstacles. An appropriate RTH altitude must be set before entering RTH.
• When the remote controller signal is normal during Advanced RTH, the pitch stick
can be used to control the flight speed, but the orientation and altitude cannot be
controlled and the aircraft cannot be flown left or right. Acceleration uses more power.
The aircraft cannot sense obstacles if the flight speed exceeds the effective sensing
speed. The aircraft will brake and hover in place and exit from RTH if the pitch stick is
pulled all the way down. The aircraft can be controlled after the pitch stick is released.
• If the home point is in the Altitude Zones while the aircraft is outside, the advanced
RTH will fly the aircraft below the altitude limit, which may be lower than the set RTH
altitude. Fly with caution.
• When the remote controller signal is normal during Straight Line RTH, the flight speed
and altitude can be controlled using the remote controller, but the orientation of the
aircraft cannot be controlled and the aircraft cannot be flown left or right. The aircraft
cannot sense obstacles if the pitch stick is used to accelerate and the flight speed
exceeds the effective sensing speed. When the aircraft is ascending or flying forward,
push the control stick in the opposite direction to exit RTH. Release the control stick to
regain control of the aircraft.
48
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
• If the aircraft reaches the max altitude while it is ascending during RTH, the aircraft
stops and returns to the Home Point at the current altitude.
• The aircraft will hover in place if it reaches the max altitude while it is ascending after
detecting obstacles in front of the aircraft.
Low Battery RTH
When the Intelligent Flight Battery level is too low and there is not enough power to return
home, land the aircraft as soon as possible.
To avoid unnecessary danger caused by insufficient power, the aircraft automatically calculates
if the battery power is sufficient to return to the Home Point according to the current position,
environment, and flight speed. A warning prompt will appear in DJI Fly when the battery level is
low and only enough to complete an RTH flight. The aircraft will automatically fly to the Home
Point if no action is taken after a 10-second countdown.
The user can cancel RTH by pressing the RTH button on the remote controller. A low battery
level warning will be prompted only once during a flight. If RTH is canceled following the
warning, the Intelligent Battery may not have enough power for the aircraft to land safely, which
may lead to the aircraft crashing or being lost.
The aircraft will land automatically if the current battery level can only support the aircraft long
enough to descend from its current altitude. Auto landing cannot be canceled, but the remote
controller can be used to alter the horizontal movement and the speed of descent of the aircraft
during landing. If there is sufficient power, the throttle stick can be used to make the aircraft
ascend at a speed of 1 m/s.
During auto landing, move the aircraft horizontally to find an appropriate place to land as soon
as possible. The aircraft will fall if the user keeps pushing the throttle stick upward until the
power is depleted.
Failsafe RTH
The action of the aircraft when the remote controller signal is lost can be set to RTH, land,or
hover in Setting > Safety > Advanced Safety Settings in DJI Fly. If the Home Point was successfully
recorded and the compass is functioning normally, Failsafe RTH automatically activates after
the remote controller signal is lost for more than six seconds.
When the lighting is sufficient and the vision systems are working normally, DJI Fly will display
the RTH path that was generated by the aircraft before the remote controller signal was lost
using Advanced RTH according to the RTH settings. The aircraft will remain in RTH even if the
remote controller signal is restored. DJI Fly will update the RTH path accordingly.
When the lighting is not sufficient and the vision systems are not available, the aircraft will enter
Original Route RTH.
Original Route RTH Procedure:
1. The aircraft brakes and hover in place.
2. a. If the aircraft is farther than 50 m from the Home Point, the aircraft adjusts its orientation
and flies backward for 50 m on its original flight route before entering Straight Line RTH.
© 2023 DJI All Rights Reserved.
49
DJI Mavic 3 Pro User Manual
b. If the aircraft is farther than 5 m but less than 50 m from the Home Point, it enters
Straight Line RTH.
c. The aircraft lands immediately if it is less than 5 m from the Home Point when RTH
begins.
3. The aircraft lands and the motors stop after reaching the Home Point.
The aircraft will enter or remain in Straight Line RTH if the remote controller signal is restored
during RTH.
• If the RTH is triggered through DJI Fly and the aircraft is farther than 5 m from the Home
Point, a prompt will appear in the app to select a landing option.
• The aircraft may not be able to return to the Home Point normally if the GNSS signal
is weak or unavailable. The aircraft may enter ATTI mode if the GNSS signal becomes
weak or unavailable after entering Failsafe RTH. The aircraft will hover in place for a
while before landing.
• It is important to set a suitable RTH altitude before each flight. Launch DJI Fly and set
the RTH altitude. The default RTH altitude is 100 m.
• The aircraft cannot sense obstacles during Failsafe RTH if the vision systems are
unavailable.
• GEO zones may affect the RTH. Avoid flying near GEO zones.
• The aircraft may not be able to return to the Home Point when the wind speed is too
high. Fly with caution.
• Be aware of small or fine objects (such as tree branches or power lines) or transparent
objects (such as water or glass) during RTH. Exit RTH and control the aircraft manually
in an emergency.
• RTH may not be available in some environments even if the vision systems are working.
The aircraft will exit RTH in such cases.
Landing Protection
If the user triggers RTH or auto landing using the remote controller or the app, Landing
Protection will activate during Smart RTH.
Landing Protection is enabled once the aircraft begins to land.
1. During Landing Protection, the aircraft will automatically detect and carefully land on
suitable ground.
2. If the ground is determined unsuitable for landing, the aircraft will hover and wait for pilot
confirmation.
3. If Landing Protection is not operational, DJI Fly will display a landing prompt when the
aircraft descends to 0.5 m from the ground. Tap confirm or push the throttle stick all the way
down and hold for one second, and the aircraft will land.
50
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Precision Landing
The aircraft automatically scans and attempts to match the terrain features below during RTH.
The aircraft will land when the current terrain matches the Home Point. A prompt will appear in
DJI Fly if the terrain match fails.
• Landing Protection is activated during Precision Landing.
• The performance of Precision Landing is subject to the following conditions:
a. The Home Point must be recorded upon takeoff and must not be changed during
flight. Otherwise, the aircraft will have no record of the terrain features of the Home
Point.
b. During takeoff, the aircraft must ascend at least 7 m before moving horizontally.
c. The Home Point terrain features must remain largely unchanged.
d. The terrain features of the Home Point must be sufficiently distinctive. Terrain such
as a snow-covered field is not suitable.
e. The lighting conditions must not be too light or too dark.
• The following actions are available during Precision Landing:
a. Press the throttle stick down to accelerate landing.
b. Move the control sticks in any direction apart from the throttle direction to stop
Precision Landing. The aircraft will descend vertically after the control sticks are
released.
© 2023 DJI All Rights Reserved.
51
DJI Mavic 3 Pro User Manual
Vision Systems and Infrared Sensing System
DJI Mavic 3 Pro is equipped with both an infrared sensing system and horizontal, upward, and
downward vision systems.
The upward and downward vision systems consist of two cameras each, and the forward,
backward, and lateral vision systems consist of four cameras in total.
The infrared sensing system consists of two 3D infrared modules. The downward vision
system and infrared sensing system help the aircraft maintain its current position, hover more
precisely, and fly indoors or in other environments where GNSS is unavailable.
The auxiliary light located at the bottom of the aircraft can assist the downward vision system.
It will automatically turn on by default in low-light environments when the flight altitude is
under 5 m. Users can also turn it on or off manually in the DJI Fly app. Each time the aircraft is
restarted, the auxiliary bottom light will revert back to the default setting Auto.
• The auxiliary LED is set to auto when used in the EU and cannot be changed. The
aircraft Front Arm LEDs are always on when used in the EU and cannot be changed.
Horizontal Omnidirectional Vision System
Upward Vision System
Infrared Sensing System
Auxiliary Bottom Light
Horizontal
Omnidirectional
Vision System
Downward Vision System
Detection Range
Forward Vision System
Precision Measurement Range: 0.5-20 m; FOV: 90° (horizontal),
103° (vertical)
Backward Vision System
Precision Measurement Range: 0.5-16 m; FOV: 90° (horizontal),
103° (vertical)
Lateral Vision System
Precision Measurement Range: 0.5-25 m; FOV: 90° (horizontal),
85° (vertical)
Upward Vision System
Precision Measurement Range: 0.2-10 m; FOV: 100° (front and
back), 90° (left and right)
Downward Vision System
Precision Measurement Range: 0.3-18 m; FOV: 130° (front and
back), 160° (left and right)
The Downward Vision System works best when the aircraft is at
an altitude of 0.5 to 30 m.
52
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
0.5-20 m
90°
0.2-10 m
90°
90°
90°
100°
0.5-25 m
0.5-25 m
90°
90°
103°
103°
90°
85°
85°
90°
90°
130° 130°
0.5-16 m
0.5-30 m
90°
160°
Using the Vision System
The positioning function of the downward vision system is applicable when GNSS signals are
unavailable or weak. It is automatically enabled in Normal or Cine mode.
The horizontal and upward vision systems will activate automatically when the aircraft is
powered on if the aircraft is in Normal or Cine mode and Obstacle Avoidance is set to Bypass
or Brake in DJI Fly. The aircraft can actively brake when detecting obstacles when using the
horizontal and upward vision systems. The horizontal and upward vision systems work best
with adequate lighting and clearly marked or textured obstacles. Due to inertia, users must
make sure the aircraft brakes within a reasonable distance.
Vision Positioning and Obstacle Sensing can be disabled in System Settings > Safety > Advanced
Safety Settings in DJI Fly.
• Pay attention to the flight environment. The vision systems and infrared sensing system
only work in certain scenarios and cannot replace human control and judgment. During
a flight, always pay attention to the surrounding environment and the warnings on DJI
Fly, and be responsible for and maintain control of the aircraft at all times.
• Vision Positioning and Obstacle Sensing are only available when flying manually and are
unavailable in modes such as RTH, auto landing, and Intelligent Flight Mode.
• When Vision Positioning and Obstacle Sensing are disabled, the aircraft relies only on
GNSS to hover, omnidirectional obstacle sensing is unavailable, and the aircraft will not
automatically decelerate during descent close to the ground. Extra caution is required
when Vision Positioning and Obstacle Sensing are disabled. Vision Positioning and
Obstacle Sensing can be temporarily disabled in clouds and fog or when an obstacle
is detected when landing. Keep Vision Positioning and Obstacle Sensing enabled in
regular flight scenarios. Vision Positioning and Obstacle Sensing are enabled by default
after restarting the aircraft.
• The downward vision system works best when the aircraft is at an altitude from 0.5 to
30 m if there is no GNSS available. Extra caution is required if the altitude of the aircraft
is above 30 m as the vision positioning performance may be affected.
• In low-light environments, the vision systems may not achieve optimal positioning
performance even if the auxiliary bottom light is turned on. Fly with caution if the GNSS
signal is weak in such environments.
© 2023 DJI All Rights Reserved.
53
DJI Mavic 3 Pro User Manual
• The downward vision system may not work properly when the aircraft is flying near
water. Therefore, the aircraft may not be able to actively avoid water below it when
landing. It is recommended to maintain flight control at all times, make reasonable
judgments based on the surrounding environment, and avoid over-relying on the
downward vision system.
• The vision systems cannot accurately identify large structures with frames and cables,
such as tower cranes, high-voltage transmission towers, high-voltage transmission lines,
cable-stayed bridges, and suspension bridges.
• The vision system cannot work properly near surfaces without clear pattern variations
or where the light is too weak or too strong. The vision system cannot work properly in
the following situations:
a. Flying near monochrome surfaces (e.g., pure black, white, red, or green).
b. Flying near highly reflective surfaces.
c. Flying near water or transparent surfaces.
d. Flying near moving surfaces or objects.
e. Flying in an area with frequent and drastic lighting changes.
f. Flying near extremely dark (< 10 lux) or bright (> 40,000 lux) surfaces.
g. Flying near surfaces that strongly reflect or absorb infrared waves (e.g., mirrors).
h. Flying near surfaces without clear patterns or textures.
i. Flying near surfaces with repeating identical patterns or textures (e.g., tiles with the
same design).
j. Flying near obstacles with small surface areas (e.g., tree branches).
• Keep the sensors clean at all times. DO NOT scratch or tamper with the sensors. DO
NOT use the aircraft in dusty or humid environments.
• Vision system cameras may need to be calibrated after being stored for an extended
period. A prompt will appear in DJI Fly and calibration will be performed automatically.
• DO NOT fly when it is rainy, smoggy, or the visibility is lower than 100 m.
• Check the following each time before takeoff:
a. Make sure there are no stickers or any other obstructions over the glass of the
infrared sensing systems and vision systems.
b. Use soft cloth if there is any dirt, dust, or water on the glass of the vision systems
and infrared sensing system. DO NOT use any cleaning product that contains
alcohol.
c. Contact DJI Support if there is any damage to the lenses of the infrared sensing and
vision systems.
• DO NOT obstruct the infrared sensing system.
54
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Advanced Pilot Assistance Systems (APAS)
The Advanced Pilot Assistance Systems (APAS) feature is available in Normal mode and Cine
mode. When APAS is enabled, the aircraft will continue to respond to user commands and plan
its path according to both control stick inputs and the flight environment. APAS makes it easier
to avoid obstacles, obtain smoother footage, and provide a better flying experience.
Keep moving the control sticks in any direction. The aircraft will avoid obstacles by flying above,
below, or to the left or right of the obstacle. The aircraft can also respond to the control stick
inputs while avoiding obstacles.
When APAS is enabled, the aircraft can be stopped by pressing the Flight Pause button on the remote
controller. The aircraft brakes and hovers for three seconds and awaits further pilot commands.
To enable APAS, open DJI Fly, enter Settings > Safety, and enable APAS by selecting Bypass.
Select Normal or Nifty mode when using Bypass. In Nifty mode, the aircraft can fly faster,
smoother, and closer to obstacles obtaining better footage while avoiding obstacles. However,
the risk of crashing into obstacles will increase. Fly with caution.
Nifty mode cannot work normally in the following situations:
1. When aircraft orientation changes rapidly flying near obstacles.
2. When flying through narrow obstacles such as canopies or bushes at high speed.
3. When flying near obstacles that are too small to detect.
4. When flying with the propeller guard.
Landing Protection
Landing Protection will activate if Obstacle Avoidance is set to Bypass or Brake and the user
pulls the throttle stick down to land the aircraft. Landing Protection is enabled once the aircraft
begins to land.
1. During Landing Protection, the aircraft will automatically detect if an area is suitable for
landing, and then land the aircraft.
2. If the ground is determined to be unsuitable for landing, the aircraft will hover when the
aircraft descends to 0.8 m above ground. Pull down on the throttle stick for at least five
seconds, and the aircraft will land without obstacle sensing.
• Make sure to use APAS when the vision systems are available. Make sure there are no
people, animals, objects with small surface areas (e.g., tree branches), or transparent
objects (e.g., glass or water) along the desired flight path.
• Make sure to use APAS when the downward vision systems are available or the GNSS
signal is strong. APAS may not function properly when the aircraft is flying over water or
snow-covered areas.
• Be extra cautious when flying in extremely dark (<300 lux) or bright (>10,000 lux)
environments.
• Pay attention to DJI Fly and make sure APAS is working normally.
• APAS may not function properly when the aircraft is flying near flight limits or in a GEO zone.
© 2023 DJI All Rights Reserved.
55
DJI Mavic 3 Pro User Manual
Vision Assist
The vision assist view, powered by the horizontal vision system, changes the horizontal speed
direction (forward, backward, left, and right) to help users navigate and observe obstacles
during flight. Swipe left on the attitude indicator, right on the mini map, or tap the icon in the
lower right corner of the attitude indicator to switch to the vision assist view.
• When using vision assist, the quality of the video transmission may be lower due to
transmission bandwidth limits, cell phone performance, or the video transmission
resolution of the screen on the remote controller.
• It is normal for propellers to appear in the vision assist view.
• Vision assist should be used for reference only. Glass walls and small objects such as
tree branches, electric wires, and kite strings cannot be displayed accurately.
• Vision assist is not available when the aircraft has not taken off or when the video
transmission signal is weak.
Vision Assist View
Direction
Horizontal Speed of
the Aircraft
Collapse
Horizontal Speed of the
Aircraft
Max
Locked
Switch to the Mini
Map
The direction of the line indicates the current horizontal
direction of the aircraft, and the length of the line indicates the
horizontal speed of the aircraft.
Vision Assist View Direction Indicates the direction of the vision assist view. Tap and hold to
lock the direction.
Switch to the Mini Map
Tap to switch from the vision assist view to the mini map.
Collapse
Tap to minimize the vision assist view.
Max
Tap to maximize the vision assist view.
Locked
Indicates that the direction of the vision assist view is locked.
Tap to cancel the lock.
• When the direction is not locked in a specific direction, the vision assist view
automatically switches to the current flight direction. Tap any other directional arrow to
switch the direction of the vision assist view for three seconds before returning to the
view of the current horizontal flight direction.
• When the direction is locked in a specific direction, tap any other directional arrow to
switch the direction of the vision assist view for three seconds before returning to the
current horizontal flight direction.
56
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Collision Warning
When an obstacle in the current view direction is detected, the vision assist view shows a
collision warning. The color of the warning is determined by the distance between the obstacle
and the aircraft.
Collision Warning Color
Distance between the Aircraft and the Obstacle
Yellow
2.2-5 m
Red
≤2.2 m
• The FOV of the vision assist in all directions is approximately 70°. It is normal not to see
obstacles in the field of view during a collision warning.
• The collision warning is not controlled by the Display Radar Map switch and remains
visible even when the radar map is switched off.
• A collision warning appears only when the vision assist view is displayed in the small
window.
© 2023 DJI All Rights Reserved.
57
DJI Mavic 3 Pro User Manual
Flight Recorder
Flight data, including flight telemetry, aircraft status information, and other parameters, are
automatically saved to the internal data recorder of the aircraft. The data can be accessed using
DJI Assistant 2 (Consumer Drones Series).
Propellers
There are two types of DJI Mavic 3 Pro Quick-Release Propellers designed to spin in different
directions. Marks are used to indicate which propellers should be attached to which motors.
Make sure to match the propeller and motor following the instructions.
Attaching the propellers
Attach the propellers with marks to the motors with marks and the unmarked propellers to the
motors without marks. Hold the motor, press the propeller down, and rotate in the direction
marked on the propeller until it pops up and locks in place.
B
A
1
2
A
B
Detaching the propellers
Hold the motor, press the propeller down, and rotate in the opposite direction to the one
marked on the propeller until it pops out.
• The propeller blades are sharp. Handle with care.
• Only use official DJI propellers. DO NOT mix propeller types.
• Propellers are consumable components. Purchase additional propellers if necessary.
• Make sure that the propellers and motors are installed securely before each flight.
• Make sure that all propellers are in good condition before each flight. DO NOT use
aged, chipped, or broken propellers.
• To avoid injury, stay away from rotating propellers or motors.
58
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
• To avoid damaging the propellers, place the aircraft in the direction shown in the
carrying case during transportation or storage. DO NOT squeeze or bend the propellers.
If propellers are damaged, the flight performance may be affected.
• Make sure the motors are mounted securely and rotating smoothly. Land the aircraft
immediately if a motor is stuck and unable to rotate freely.
• DO NOT attempt to modify the structure of the motors.
• DO NOT touch or let hands or body parts come in contact with the motors after flight,
as they may be hot.
• DO NOT block any of the ventilation holes on the motors or the body of the aircraft.
• Make sure the ESCs sound normal when powered on.
Intelligent Flight Battery
The Mavic 3 Intelligent Flight Battery is a 15.4V, 5000mAh battery with smart charging and
discharging functionality.
Battery Features
1.
Battery Level Display: the battery level LEDs display the current battery level.
2.
Auto-Discharging Function: to prevent swelling, the battery automatically discharges to 96%
of the battery level when it is idle for three days, and automatically discharges to 60% of the
battery level when it is idle for nine days. It is normal to feel moderate heat being emitted
from the battery during the discharging process.
3.
Balanced Charging: during charging, the voltages of the battery cells are automatically
balanced.
4.
Overcharge Protection: the battery stops charging automatically once fully charged.
5.
Temperature Detection: to prevent damage, the battery only charges when the temperature
is between 5° and 40° C (41° and 104° F).
6.
Overcurrent Protection: the battery stops charging if an excess current is detected.
7.
Over-Discharge Protection: discharging stops automatically to prevent excess discharge
when the battery is not in use. Over-discharge protection is not enabled when the battery is
in use.
8.
Short Circuit Protection: the power supply is automatically cut if a short circuit is detected.
9.
Battery Cell Damage Protection: the app will display a warning prompt when a damaged
© 2023 DJI All Rights Reserved.
59
DJI Mavic 3 Pro User Manual
battery cell is detected.
10. Hibernation Mode: the battery switches off after 20 minutes of inactivity to save power. If
the battery level is less than 5%, the battery will enter Hibernation mode after six hours to
prevent over-discharge. In Hibernation mode, the battery level indicators do not illuminate.
Charge the battery to wake it from hibernation.
11. Communication: information about the voltage, capacity, and current of the battery is
transmitted to the aircraft.
• Refer to the Safety Guidelines and the stickers on the battery before use. Users shall
take full responsibility for all operations and usage.
Using the Battery
Checking the Battery Level
Press the power button once to check the battery level.
LED1
LED2
LED3 Power Button
LED4
The battery level LEDs display the power level of the battery during discharging. The
statuses of the LEDs are defined below:
: LED is on
LED1
LED2
: LED is flashing
LED3
LED4
: LED is off
Battery Level
88%-100%
76%-87%
63%-75%
51%-62%
38%-50%
26%-37%
13%-25%
0%-12%
Powering On/Off
Press the power button once, then press again, and hold for two seconds to power the battery
on or off. The battery level LEDs display the battery level when the aircraft is powered on.
60
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Low-Temperature Notice
1. Battery capacity is significantly reduced when flying at low temperatures from -10° to 5° C
(14° to 41° F). It is recommended to hover the aircraft in place for a while to heat the battery.
Make sure to fully charge the battery before takeoff.
2. Batteries cannot be used in extremely low-temperature environments of lower than -10° C (14° F).
3. When in low-temperature environments, end the flight as soon as DJI Fly displays the low
battery level warning.
4. To ensure optimal performance, keep the battery temperature above 20° C (68° F).
5. The reduced battery capacity in low-temperature environments reduces the wind speed
resistance performance of the aircraft. Fly with caution.
6. Take extra caution when at high altitudes.
Charging the Battery
Fully charge the battery before each use. It is recommended to use the charging devices
provided by DJI, such as the DJI 100W USB-C Power Adapter, DJI 65W Portable Charger, or other
USB Power Delivery chargers.
Using A Charger
1. Connect the charger to an AC power supply (100-240V, 50/60 Hz; use a power cable with
suitable specifications for charging, and use a power adapter if necessary).
2. Attach the aircraft to the charger
100Wusing the battery charging cable with the battery powered off.
3. The battery level LEDs display the current battery level during charging.
4. The Intelligent Flight Battery is fully charged when all the battery level LEDs are off. Detach
the charger when the battery is fully charged.
100W
OR
65W
© 2023 DJI All Rights Reserved.
61
DJI Mavic 3 Pro User Manual
• DO NOT charge an Intelligent Flight Battery immediately after flight as it may be too hot.
Wait for the battery to cool down to the operating temperature before charging again.
• The charger stops charging the battery if the battery cell temperature is not within the
operating range of 5° to 40° C (41° to 104° F). The ideal charging temperature is from
22° to 28° C (71.6° to 82.4° F).
• Fully charge the battery at least once every three months to maintain battery health.
• If a battery has not been charged or discharged for three months or more, the battery
will no longer be covered by the warranty.
• For safety purposes, keep the batteries at a low power level in transit. Before
transportation, it is recommended to discharge the batteries to 30% or lower.
The table below shows the battery level during charging.
LED1
LED2
LED3
LED4
Battery Level
0%-50%
51%-75%
76%-99%
100%
Using the Charging Hub
DJI Mavic 3 Series 100W Battery Charging Hub is designed for use with Mavic 3 Intelligent
Flight Batteries. When used with the DJI 100W USB-C Power Adapter, it can charge up to three
Intelligent Flight Batteries in sequence from high to low power level. The charging time for one
battery is approximately 1 hour and 10 minutes.
How to Charge
1. Insert the Intelligent Flight Battery into the battery port. Connect the charging hub to a
power outlet (100-240 V, 50-60 Hz) using the DJI 100W USB-C Power Adapter.
2. The Intelligent Flight Battery with the highest power level will be charged first, and then the rest
will be charged in sequence according to their power levels. Refer to the Status LED Indicator
Descriptions for more information about the blinking patterns of the status LED indicator.
3. The Intelligent Flight Battery can be disconnected from the charging hub when charging is
complete.
62
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Status LED Indicator Descriptions
Blinking Pattern
Description
Solid yellow
No battery is inserted.
Pulses green
Charging
Solid green
All batteries fully charged
Blinks yellow
Temperature of batteries too low or too high (no further operation
needed)
Solid red
Power supply or battery error (remove and reinsert the batteries or
unplug and plug in the charger)
• It is recommended to use a DJI 100W USB-C Power Adapter when using the charging
hub to charge Mavic 3 Intelligent Flight Batteries.
• The charging hub is only compatible with BWX260-5000-15.4 Intelligent Flight Batteries.
DO NOT attempt to use the charging hub with other battery models.
• Place the charging hub on a flat and stable surface when in use. Make sure the device is
properly insulated to prevent fire hazards.
• DO NOT attempt to touch the metal terminals on the battery ports.
• Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup.
Battery Protection Mechanisms
The battery level LEDs can display battery protection notifications triggered by abnormal
charging conditions.
Battery Protection Mechanisms
LED1
LED2
LED3
LED4
Blinking Pattern
Status
LED2 blinks twice per second
Overcurrent detected
LED2 blinks three times per
second
Short circuit detected
LED3 blinks twice per second
Overcharge detected
LED3 blinks three times per
second
Over-voltage charger detected
LED4 blinks twice per second
Charging temperature is too
low
LED4 blinks three times per
second
Charging temperature is too
high
If any of the battery protection mechanisms are activated, unplug the charger, and plug it in
again to resume charging. If the charging temperature is abnormal, wait for it to return to
normal. The battery will automatically resume charging without the need to unplug and plug
the charger again.
© 2023 DJI All Rights Reserved.
63
DJI Mavic 3 Pro User Manual
Inserting/Removing the Battery
Insert the Intelligent Flight Battery into the battery compartment of the aircraft. Make sure it is
mounted securely and that the battery buckles are clicked into place.
Click
Press and hold the textured part of the battery buckles on the sides of the battery to remove it
from the compartment.
1
2
• DO NOT insert or remove the battery while the aircraft is powered on.
• Make sure the battery is mounted securely.
64
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Gimbal and Camera
Gimbal Profile
The 3-axis gimbal provides stabilization for the camera, allowing you to capture clear and stable
images and video. The control tilt range is -90° to +35° and the control pan range is -5° to +5°.
35°
0°
5°
-5°
-90°
Use the gimbal dial on the remote controller to control the tilt of the camera. Alternatively, do
so through the camera view in DJI Fly. Press and hold the screen until the camera adjustment
bar appears. Drag the bar up or down to control the tilt and left or right to control the pan.
Gimbal Operation Modes
Two gimbal operation modes are available. Switch between the operation modes in Settings >
Control in DJI Fly.
Follow Mode: the angle of the gimbal remains stable relative to the horizontal plane. Users can
adjust the gimbal tilt. This mode is suitable for shooting stills.
FPV Mode: when the aircraft is flying forward, the gimbal synchronizes with the movement of
the aircraft to provide a first-person flying experience.
• DO NOT tap or knock the gimbal after the aircraft is powered on. Launch the aircraft
from open and flat ground to protect the gimbal during takeoff.
• After installing the wide-angle lens, make sure the gimbal is level and forward before
takeoff, so that the aircraft can correctly detect the installation status of the Wide-Angle
Lens. The gimbal will be level when the aircraft is powered on, if the gimbal rotates,
recenter the gimbal using the remote controller or DJI Fly, as follows:
a. Tap Recenter Gimbal on the Settings > Control page of DJI Fly.
b. Press the Customizable C1 Button on the remote controller (the default function
recenters the gimbal and points the gimbal downward, this can be customized).
• Pano and Asteroid functions will not be available after the Wide-Angle Lens is installed.
• Precision elements in the gimbal may be damaged by a collision or impact, which may
cause the gimbal to function abnormally.
• Avoid getting dust or sand on the gimbal, especially in the gimbal motors.
• A gimbal motor may enter protection mode in the following situations: a. The aircraft
is on uneven ground, and the gimbal is obstructed. b. The gimbal experiences an
excessive external force, such as during a collision.
© 2023 DJI All Rights Reserved.
65
DJI Mavic 3 Pro User Manual
• DO NOT apply external force to the gimbal after the gimbal is powered on. DO NOT add
any extra payload other than an official accessory to the gimbal, as this may cause the
gimbal to function abnormally or lead to permanent motor damage.
• Remove the gimbal protector before powering on the aircraft. Attach the gimbal
protector when the aircraft is not in use.
• Flying in heavy fog or clouds may make the gimbal wet, leading to temporary failure.
The gimbal will recover full functionality once it is dry.
Camera Profile
DJI Mavic 3 Pro is equipped with 3 cameras, capable of switching freely between different focal
lengths to adapt to the shooting composition of various scenes.
DJI Mavic 3 Pro uses a 4/3 CMOS sensor Hasselblad L2D-20c camera, which can take 20MP
photos and record at 5.1K 50fps/DCI 4K 120fps Apple ProRes 422 HQ, Apple ProRes 422, Apple
ProRes 422 LT and H.264/H.265 format videos. The camera also supports 10-bit D-Log video,
has a dynamic range of 12.8 stops and an adjustable aperture of f/2.8 to f/11. The equivalent
focal length is 24 mm and shoots from 1 m to infinity.
The medium tele camera boasts a 1/1.3-in CMOS sensor, with an aperture of f/2.8, 3x optical
zoom and up to 7x digital zoom. It can take 48MP photos and 4K 60fps videos. The equivalent
focal length is 70 mm and shoots from 3 m to infinity.
The tele camera boasts a 1/2-in CMOS sensor, with an aperture of f/3.4 and 7x optical zoom. It
can take 12MP photos and 4K 60fps videos. The equivalent focal length is 166 mm and shoot
from 3 m to infinity. When in Explore mode, the tele camera can zoom at 28x.
• DO NOT expose the camera lens in an environment with laser beams, such as a laser
show, in order to avoid damaging the camera sensor.
• Make sure the temperature and humidity are within suitable ranges for the camera
during use and storage.
• Use a lens cleanser to clean the lens to avoid damage or poor image quality.
• DO NOT block any ventilation holes on the camera as the heat generated may damage
the device or injure the user.
• Only the DJI Mavic 3 Pro Cine supports the recording and storing of Apple ProRes 422
HQ, Apple ProRes 422, and Apple ProRes 422 LT video.
• Mavic 3 Pro uses SmartPhoto mode by default in Single Shot, which integrates features
such as scene recognition or HDR for optimal results. SmartPhoto needs to take
multiple shots continuously for image synthesis. When the aircraft is moving or using
the medium tele camera at 48MP resolution, SmartPhoto will not be supported, and the
photo performance will differ.
• The cameras may not focus correctly in the following situations:
a. Shooting dark objects far away.
b. Shooting objects with repeating identical patterns and textures or without clear
patterns and textures.
c. Shooting shiny or reflective objects (such as street lighting and glass).
66
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
d. Shooting flashing objects.
e. Shooting fast-moving objects.
f. When the aircraft/gimbal is moving fast.
g. Shooting objects with varying distances in the focus range.
Storing and Exporting Photos and Videos
Storing Photos and Videos
DJI Mavic 3 Pro has 8GB of built-in storage and supports the use of a microSD card to store
photos and videos. A SDXC, or UHS-I microSD card is required due to the fast read and write
speeds necessary for high-resolution video data. Refer to the Specifications section for more
information about recommended microSD cards.
In addition, DJI Mavic 3 Pro Cine aircraft comes with a built-in 1TB SSD. The footage can be
output quickly via the DJI 10Gbps Lightspeed Data Cable.
Exporting Photos and Videos
Use QuickTransfer to export the footage to a mobile phone. Connect the aircraft to a computer
or use a card reader to export the footage to a computer.
• DO NOT remove the microSD card from the aircraft when taking photos or videos.
Otherwise, the microSD card may be damaged.
• To ensure the stability of the camera system, single video recordings are limited to 30
minutes.
• Check camera settings before use to ensure they are configured correctly.
• Before shooting important photos or videos, shoot a few images to test whether the
camera is operating correctly.
• Photos and videos cannot be transmitted or copied from the camera if the aircraft is
powered off.
• Make sure to power off the aircraft correctly. Otherwise, the camera parameters will
not be saved, and any recorded videos may be affected. DJI is not responsible for any
loss caused by an image or video recorded in a way that is not machine-readable.
© 2023 DJI All Rights Reserved.
67
DJI Mavic 3 Pro User Manual
QuickTransfer
DJI Mavic 3 Pro can connect directly to mobile devices via Wi-Fi, enabling users to download
photos and videos from the aircraft to the mobile device through DJI Fly without using the
remote controller. Users can enjoy faster and more convenient downloads with a transmission
rate of up to 80 MB/s.
Usage
1. Power on the aircraft and wait until the self-diagnostic tests of the aircraft are complete.
2. Make sure Bluetooth and Wi-Fi are enabled on the mobile device. Launch DJI Fly and a
prompt will appear to connect to the aircraft.
3. Tap Connect. Once successfully connected, the files on the aircraft can be accessed and
downloaded at high speed. When connecting the mobile device to the aircraft for the first
time, press and hold the power button of the aircraft for two seconds to confirm.
• The maximum download rate can only be achieved in countries and regions where
the 5.8 GHz frequency is permitted by local laws and regulations. To achieve the
maximum download rate, the device must support a 5.8 GHz frequency band and
Wi-Fi 6 connection, and the footage must be using the internal storage of aircraft in
an environment without interference or obstruction. If 5.8 GHz is not allowed by local
regulations (such as in Japan), or the mobile device of the user does not support the
5.8 GHz frequency band, then QuickTransfer will use the 2.4 GHz frequency band and
its maximum download rate will reduce to 10 MB/s.
• Make sure that Bluetooth, Wi-Fi, and location services are enabled on the mobile device
before using QuickTransfer.
• When using QuickTransfer, it is not necessary to enter the Wi-Fi password on the
settings page of the mobile device in order to connect. Launch DJI Fly and a prompt will
appear to connect the aircraft.
• Use QuickTransfer in an unobstructed environment with no interference and stay
away from sources of interference such as wireless routers, Bluetooth speakers, or
headphones.
68
© 2023 DJI All Rights Reserved.
Remote Controller
This section describes the features of
the remote controller and includes
instructions for controlling the aircraft
and the camera.
© 2023 DJI All Rights Reserved.
69
DJI Mavic 3 Pro User Manual
Remote Controller
DJI RC Pro
The DJI RC Pro remote controller features O3+, works at both 2.4 GHz and 5.8 GHz, is capable of
selecting the best transmission channel automatically, and can transmit a live HD view from the
camera of the aircraft at a distance of up to 15 km (compliant with FCC standards, measured in
a wide open area without interference). The built-in 5.5-in high brightness 1000 cd/m2 screen
boasts a resolution of 1920×1080 pixels while the remote controller comes with a wide range
of aircraft and gimbal controls as well as customizable buttons. Users can connect to the
internet via Wi-Fi and the Android 10 operating system comes with a variety of functions such
as Bluetooth and GNSS (GPS+GLONASS+Galileo).
With the built-in speaker, the remote controller supports H.264 4K/120fps and H.265 4K/120fps
video, which also supports video output via the Mini HDMI port. The internal storage of the
remote controller is 32 GB and also supports the use of microSD cards to store the photos and
videos.
The 5000mAh 36Wh battery provides the remote controller with a maximum operating time of
three hours.
Operation
Powering On/Off
Press the power button once to check the current battery level.
Press, then press and hold the power button to power the remote controller on or off.
Charging the Battery
Use a USB-C cable to connect the charger to the USB-C port of the remote controller.
70
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Controlling the Gimbal and Camera
Focus/Shutter Button: press halfway down to auto-focus, and press all the way down to take a
photo.
Record Button: press once to start or stop recording.
Camera Control Dial: use to adjust the zoom by default. The dial function can be set to adjust
the focal length, EV, aperture, shutter speed, and ISO.
Gimbal Dial: control the tilt of the gimbal.
Gimbal Dial
Camera Control Dial
Record Button
Focus/Shutter Button
© 2023 DJI All Rights Reserved.
71
DJI Mavic 3 Pro User Manual
Controlling the Aircraft
Three preprogrammed modes (Mode 1, Mode 2, and Mode 3) are available and custom modes
can be configured in the DJI Fly app.
Mode 1
Left Stick
Right Stick
Forward
Up
Down
Backward
Turn Left
Left
Turn Right
Right
Mode 2
Left Stick
Right Stick
Up
Forward
Down
Backward
Turn Left
Left
Turn Right
Right
Mode 3
Left Stick
Right Stick
Forward
Up
Down
Backward
Left
Right
Turn Left
Turn Right
The default control mode of the remote controller is Mode 2. In this manual, Mode 2 is used as
an example to illustrate how to use the control sticks.
• Stick Neutral/Center Point: control sticks are in the center.
• Moving the control stick: the control stick is pushed away from the center position.
72
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Remote Controller
(Mode 2)
Aircraft
Remarks
Throttle Stick: moving the left stick up or down
changes the altitude of the aircraft.
Push the stick up to ascend and push down to
descend. The aircraft hovers in place if the stick is
in the center. Use the left stick to take off when the
motors are spinning at an idle speed.
The more the stick is pushed away from the center,
the faster the aircraft changes elevation. Push the
stick gently to prevent sudden and unexpected
changes in altitude.
Yaw Stick: moving the left stick to the left or right
controls the orientation of the aircraft.
Push the stick left to rotate the aircraft counterclockwise
and right to rotate the aircraft clockwise. The aircraft
hovers in place if the stick is in the center.
The more the stick is pushed away from the center, the
faster the aircraft rotates.
Pitch Stick: moving the right stick up and down to
change the pitch of the aircraft.
Push the stick up to fly forward and down to fly
backward. The aircraft hovers in place if the stick is in
the center.
The more the stick is pushed away from the center,
the faster the aircraft moves.
Roll Stick: moving the right stick to the left or right
changes the roll of the aircraft.
Push the stick left to fly left and right to fly right. The
aircraft hovers in place if the stick is in the center.
The more the stick is pushed away from the center,
the faster the aircraft moves.
Flight Mode Switch
Toggle the switch to select the desired flight mode.
Position
Flight Mode
S
Sport Mode
N
Normal Mode
C
Cine Mode*
CNS
* Low Speed mode in EU.
© 2023 DJI All Rights Reserved.
73
DJI Mavic 3 Pro User Manual
RTH Button
Press and hold the RTH button until the remote controller beeps to start RTH. The aircraft will
fly to the last updated Home Point. Press the button again to cancel RTH and regain control of
the aircraft.
Customizable Buttons
Including C1, C2, C3, and the 5D button. Go to Settings > Control in DJI Fly to customize the
function of the button.
Customizable
Button C3
Customizable
Button C2
Customizable
Button C1
5D Button
Button Combinations
Some frequently used features can be activated by using combination buttons. To use
combination buttons, press and hold the back button and operate the other button in the
combination. In actual use, enter the home page of the remote controller and tap Tips to check
all available combination buttons quickly.
Combination Operation
Function
Back Button + Left Dial
Adjust Brightness
Back Button + Right Dial
Adjust Volume
Back Button + Record Button
Record Screen
Back Button + Shutter Button
Screenshot
Back Button + 5D Button
Toggle up - Home; Toggle down - Shortcut settings; Toggle
left - Recently opened apps
74
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Remote Controller LEDs
Status LED
Blinking Pattern
—
—
—
Descriptions
Solid red
Disconnected from the aircraft
Blinks red
The temperature of the remote controller is too high, or the
battery level of the aircraft is low
Solid green
Connected with the aircraft
Blinks blue
The remote controller is linking to an aircraft
Solid yellow
Firmware update failed
Blinks yellow
The battery level of the remote controller is low
Blinks cyan
Control sticks not centered
Battery Level LEDs
Blinking Pattern
Battery Level
76%-100%
51%-75%
26%-50%
0%-25%
Remote Controller Alert
The remote controller vibrates or beeps twice to indicate an error or warning. Pay attention
when prompts appear on the touchscreen or in DJI Fly. Slide down from the top of the screen
and select Do Not Disturb or Mute to disable alerts.
The remote controller sounds an alert during RTH. The alert cannot be canceled. The remote
controller sounds an alert when the battery level of the remote controller is low (6% to 10%).
A low battery level alert can be canceled by pressing the power button. The critical low battery
level alert, which is triggered when the battery level is less than 5%, cannot be canceled.
Optimal Transmission Zone
The signal between the aircraft and the remote controller is most reliable when the antennas
are positioned in relation to the aircraft, as illustrated below.
The optimal transmission range is where the antennas face the aircraft, with the angle between
the antennas and the back of the remote controller being 180° or 270°.
© 2023 DJI All Rights Reserved.
75
DJI Mavic 3 Pro User Manual
• DO NOT operate other wireless devices at the same frequency as the remote controller
to avoid signal interference.
• A prompt will be displayed in DJI Fly if the transmission signal is weak during flight.
Adjust the antennas to make sure that the aircraft is in the optimal transmission range.
Linking the Remote Controller
The remote controller is already linked to the aircraft when purchased together as a combo.
Otherwise, follow the steps below to link the remote controller and the aircraft after activation.
Method 1: Using Button Combinations
1. Power on the aircraft and the remote controller.
2. Press the C1, C2, and Record buttons simultaneously until the status LED blinks blue and the
remote controller beeps.
3. Press and hold the power button of the aircraft for more than four seconds. The aircraft
beeps twice after a short beep, and its battery level LEDs blink in sequence to indicate it is
ready to link. The remote controller will beep twice, and its status LED will turn solid green to
indicate linking is successful.
Method 2: Using DJI Fly
1. Power on the aircraft and the remote controller.
2. Launch DJI Fly, in camera view tap
and select Control and then Connect to the Aircraft. During
linking, the status LED of the remote controller blinks blue and the remote controller beeps.
3. Press and hold the power button of the aircraft for more than four seconds. The aircraft
beeps twice after a short beep, and its battery level LEDs blink in sequence to indicate it is
ready to link. The remote controller will beep twice, and its status LED will turn solid green to
indicate linking is successful.
• Make sure the remote controller is within 0.5 m of the aircraft during linking.
• The remote controller will automatically unlink from an aircraft if a new remote
controller is linked to the same aircraft.
• Turn off the Bluetooth and Wi-Fi of the remote controller for optimal video transmission.
• Fully charge the remote controller before each flight. The remote controller sounds an
alert when the battery level is low.
• If the remote controller is powered on and is not in use for five minutes, an alert will
sound. After six minutes, the aircraft automatically powers off. Move the control sticks
or press any button to cancel the alert.
• Fully charge the battery at least once every three months to maintain battery health.
76
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Operating the Touchscreen
Home
4:53
DJI Fly
Gallery
Files
Firefox
Setting
Guide
The top of the touchscreen displays the time, Wi-Fi signal, and battery level of the remote
controller.
Some apps are already installed by default such as DJI Fly, Gallery, Files, Firefox, Settings, and
Tips. Settings includes network, display, voice, and Bluetooth configurations. Users can quickly
learn about the features under Tips.
Screen Gestures
Slide from the left or right to
the center of the screen to
return to the previous screen.
Slide up from the bottom of
the screen to return to the
homepage.
Slide up from the bottom of
the screen and hold to access
recently opened apps.
×2
Slide down from the top of the screen to
open the status bar when in DJI Fly. The status
bar displays information such as time, Wi-Fi
signal, and remote controller battery level.
Open Quick Settings: slide down twice from
the top of the screen to open Quick Settings
when in DJI Fly. Slide down once from the top
of the screen to open Quick Settings when
not in DJI Fly.
© 2023 DJI All Rights Reserved.
77
DJI Mavic 3 Pro User Manual
Quick Settings
2
3
4
1
5
6
7
1. Notifications
Tap to check system notifications.
2. Recent
Tap to check recently opened apps.
3. Home
Tap to return to the home screen.
4. System Settings
Tap to access system settings.
5. Shortcuts
: Tap to enable or disable Wi-Fi. Hold to enter settings and connect to or add a Wi-Fi
network.
: Tap to enable or disable Bluetooth. Hold to enter settings and connect with nearby
Bluetooth devices.
: Tap to enable Do Not Disturb mode. In this mode, system prompts will be disabled.
: Tap to start recording the screen. While recording, the screen displays the recording
time. Tap Stop to stop recording.
: Tap to screenshot the screen.
: Mobile data.
: Tap to enable Airplane mode. Wi-Fi, Bluetooth, and mobile data will be disabled.
6. Adjusting Brightness
: The screen is in auto brightness mode when the icon is highlighted. Tap or slide the bar
will switch to manual brightness mode.
7. Adjusting Volume
Slide the bar to adjust the volume and tap
78
© 2023 DJI All Rights Reserved.
to mute.
DJI Mavic 3 Pro User Manual
Advanced Features
Calibrating the Compass
The compass may need to be calibrated after the remote controller is used in areas with
electromagnetic interference. A warning prompt will appear if the compass of the remote
controller requires calibration. Tap the warning prompt to start calibrating. In other cases,
follow the steps below to calibrate your remote controller.
1. Power on the remote controller and enter the home page.
2. Select System Settings
, scroll down, and tap Compass.
3. Follow the on-screen instructions to calibrate the compass.
4. A prompt will be displayed when the calibration is successful.
HDMI Settings
The touchscreen can be shared with a display screen via an HDMI cable.
The resolution can be set in Settings > Display, and then HDMI.
© 2023 DJI All Rights Reserved.
79
DJI Mavic 3 Pro User Manual
DJI RC
When used with DJI Mavic 3 Pro, DJI RC remote controller features O3+ video transmission,
works at both 2.4 GHz and 5.8 GHz frequency bands. It is capable of selecting the best
transmission channel automatically and can transmit up to 1080p 60fps HD live view from the
aircraft to the remote controller at a distance of up to 15 km (compliant with FCC standards,
and measured in a wide open area without interference). The DJI RC is also equipped with a
5.5-in touchscreen (1920×1080 pixel resolution) and a wide range of controls and customizable
buttons, enabling users to easily control the aircraft and remotely change the aircraft settings.
The built-in 5200 mAh battery with a power of 18.72 Wh provides the remote controller with a
maximum operating time of four hours. The DJI RC comes with many other functions such as
Wi-Fi connection, built-in GNSS (GPS+BeiDou+Galileo), Bluetooth, built-in speakers, detachable
control sticks, and microSD storage.
Operation
Powering On/Off
Press the power button once to check the current battery level.
Press, then press and hold the power button for two seconds to power the remote controller on
or off.
100W
Charging the Battery
Use a USB-C cable to connect the charger to the USB-C port of the remote controller. The
battery can be fully charged in about 1 hour and 30 minutes with a maximum charging power
of 15 W (5V/3A).
OR
65W
80
© 2023 DJI All Rights Reserved.
100W
DJI Mavic 3 Pro User Manual
Controlling the Gimbal and Camera
Focus/Shutter Button: press halfway down to auto-focus and press all the way down to take a
photo.
Record Button: press once to start or stop recording.
Camera Control Dial: Use to adjust the zoom by default. The dial function can be set to adjust
the focal length, EV, aperture, shutter speed, and ISO.
Gimbal Dial: control the tilt of the gimbal.
Camera Control Dial
Gimbal Dial
Record Button
Focus/Shutter Button
© 2023 DJI All Rights Reserved.
81
DJI Mavic 3 Pro User Manual
Controlling the Aircraft
Three preprogrammed modes (Mode 1, Mode 2, and Mode 3) are available and custom modes
can be configured in DJI Fly.
Mode 1
Left Stick
Right Stick
Forward
Up
Down
Backward
Turn Left
Left
Turn Right
Right
Mode 2
Left Stick
Right Stick
Up
Forward
Down
Backward
Turn Left
Left
Turn Right
Right
Mode 3
Left Stick
Right Stick
Forward
Up
Down
Backward
Left
Right
Turn Left
Turn Right
The default control mode of the remote controller is Mode 2. In this manual, Mode 2 is used as
an example to illustrate how to use the control sticks.
• Stick Neutral/Center Point: control sticks are in the center.
• Moving the control stick: the control stick is pushed away from the center position.
82
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Remote Controller
(Mode 2)
Aircraft
Remarks
Throttle Stick: moving the left stick up or down
changes the altitude of the aircraft.
Push the stick up to ascend and down to descend.
The more the stick is pushed away from the center
position, the faster the aircraft will change altitude.
Push the stick gently to prevent sudden and
unexpected changes in altitude.
Yaw Stick: moving the left stick to the left or right
controls the orientation of the aircraft.
Push the stick left to rotate the aircraft counterclockwise
and right to rotate the aircraft clockwise. The aircraft
hovers in place if the stick is in the center.
The more the stick is pushed away from the center, the
faster the aircraft rotates.
Pitch Stick: moving the right stick up and down to
change the pitch of the aircraft.
Push the stick up to fly forward and down to fly
backward. The aircraft hovers in place if the stick is in
the center.
The more the stick is pushed away from the center,
the faster the aircraft moves.
Roll Stick: moving the right stick to the left or right
changes the roll of the aircraft.
Push the stick left to fly left and right to fly right. The
aircraft hovers in place if the stick is in the center.
The more the stick is pushed away from the center,
the faster the aircraft moves.
Flight Mode Switch
Toggle the switch to select the desired flight mode.
Position
Flight Mode
S
Sport Mode
N
Normal Mode
C
Cine Mode*
CNS
* Low Speed mode in EU.
© 2023 DJI All Rights Reserved.
83
DJI Mavic 3 Pro User Manual
Flight Pause/RTH Button
Press once to make the aircraft brake and hover in place. Press and hold the button until the
remote controller beeps and starts RTH, the aircraft will return to the last recorded Home Point.
Press this button again to cancel RTH and to regain control of the aircraft.
Customizable Buttons
Go to Settings > Control in DJI Fly to set the functions of the customizable C1 and C2 buttons.
Customizable
Button C2
Customizable
Button C1
Remote Controller LEDs
Status LED
Blinking Pattern
—
Disconnected from the aircraft
Blinking red
The battery level of the aircraft is low
Solid green
Connected with the aircraft
Blinking blue
The remote controller is linking to an aircraft
—
Solid yellow
Firmware update failed
—
Solid blue
Firmware update successful
Blinking yellow
The battery level of the remote controller is low
Blinking cyan
Control sticks not centered
—
84
Descriptions
Solid red
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Battery Level LEDs
Blinking Pattern
Battery Level
76%-100%
51%-75%
26%-50%
0%-25%
Remote Controller Alert
The remote controller beeps to indicate an error or warning. Pay attention when prompts
appear on the touchscreen or in DJI Fly. Slide down from the top of the screen and select Mute
to disable all alerts, or slide the volume bar to 0 to disable some alerts.
The remote controller sounds an alert during RTH. The alert cannot be canceled. The remote
controller sounds an alert when the battery level of the remote controller is low (6% to 10%).
A low battery level alert can be canceled by pressing the power button. The critical low battery
level alert, which is triggered when the battery level is less than 5%, cannot be canceled.
Optimal Transmission Zone
The signal between the aircraft and the remote controller is most reliable when the remote
controller is positioned towards the aircraft as depicted below.
Optimal Transmission
Weak Signal
• DO NOT operate other wireless devices at the same frequency as the remote controller
to avoid signal interference.
• A prompt will be displayed in DJI Fly if the transmission signal is weak during flight.
Adjust the remote controller orientation to make sure that the aircraft is in the optimal
transmission range.
© 2023 DJI All Rights Reserved.
85
DJI Mavic 3 Pro User Manual
Linking the Remote Controller
The remote controller is already linked to the aircraft when purchased together as a combo.
Otherwise, follow the steps below to link the remote controller and the aircraft after activation.
1. Power on the aircraft and the remote controller.
2. Launch DJI Fly.
3. In camera view, tap
and select Control and then Connect to the Aircraft. During linking,
the status LED of the remote controller blinks blue and the remote controller beeps.
4. Press and hold the power button of the aircraft for more than four seconds. The aircraft
beeps twice after a short beep, and its battery level LEDs blink in sequence to indicate it is
ready to link. The remote controller will beep twice, and its status LED will turn solid green to
indicate linking is successful.
• Make sure the remote controller is within 0.5 m of the aircraft during linking.
• The remote controller will automatically unlink from an aircraft if a new remote
controller is linked to the same aircraft.
• Turn off the Bluetooth and Wi-Fi of the remote controller for optimal video
transmission.
• Fully charge the remote controller before each flight. The remote controller sounds an
alert when the battery level is low.
• If the remote controller is powered on and not in use for five minutes, an alert will
sound. After six minutes, the aircraft automatically powers off. Move the control sticks
or press any button to cancel the alert.
• Fully charge the battery at least once every three months to maintain battery health.
86
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Operating the Touchscreen
Home
Screen Gestures
Slide from the left or right to
the center of the screen to
return to the previous screen.
Slide up from the bottom of
the screen to return to DJI Fly.
×2
Slide down from the top of the
screen to open the status bar
when in DJI Fly.
Slide down twice from the top
of the screen to open Quick
Settings when in DJI Fly.
The status bar displays the time,
Wi-Fi signal, battery level of the
remote controller, etc.
© 2023 DJI All Rights Reserved.
87
DJI Mavic 3 Pro User Manual
Quick Settings
1
2
3
4
5
1. Notifications
Tap to check system notifications.
2. System Settings
Tap to access system settings and configure settings such as Bluetooth, volume, and
network. You can also view the Guide to learn more about the controls and status LEDs.
3. Shortcuts
: Tap to enable or disable Wi-Fi. Hold to enter settings and then connect to or add a Wi-Fi
network.
: Tap to enable or disable Bluetooth. Hold to enter settings and connect with nearby
Bluetooth devices.
: Tap to enable Airplane mode. Wi-Fi and Bluetooth will be disabled.
: Tap to turn off system notifications and disable all alerts.
: Tap to start recording the screen. The function will be available only after a microSD card
is inserted into the microSD slot on the remote controller.
: Tap to take a screenshot. The function will be available only after a microSD card is
inserted into the microSD slot on the remote controller.
: Mobile data.
4. Adjusting Brightness
Slide the bar to adjust the screen brightness.
5. Adjusting Volume
Slide the bar to adjust the volume.
88
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Advanced Features
Calibrating the Compass
The compass may need to be calibrated after the remote controller is used in areas with
electromagnetic interference. A warning prompt will appear if the compass of the remote
controller requires calibration. Tap the warning prompt to start calibrating. In other cases,
follow the steps below to calibrate the remote controller.
1. Power on the remote controller, and enter Quick Settings.
2. Select System Settings
, scroll down, and tap Compass.
3. Follow the on-screen instructions to calibrate the compass.
4. A prompt will be displayed when the calibration is successful.
© 2023 DJI All Rights Reserved.
89
DJI Fly App
This section introduces the main
functions of the DJI Fly app.
90
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
DJI Fly App
Home
Launch DJI Fly and enter the home screen.
Fly Spots
View or share flight and shooting locations nearby, learn more about GEO Zones, and preview
aerial photos of different locations taken by other users.
Academy
Tap the icon in the top right corner to enter Academy and view product tutorials, flight tips,
flight safety notices, and manual documents.
Album
Allows you to view photos and videos from the aircraft album or saved on the local device.
SkyPixel
Enter SkyPixel to view videos and photos shared by other users.
Profile
View account information and flight records, visit the DJI forum and online store, access the
Find My Drone feature, offline maps, and other settings such as firmware updates, camera view,
cached data, account privacy, and language.
© 2023 DJI All Rights Reserved.
91
DJI Mavic 3 Pro User Manual
Camera View
Buttons Description
1
2
3
4
5
6
7
19
8
9
18
10
17
11
16
1.
15
14
13
12
Flight Mode
N Mode: displays the current flight mode.
2.
System Status Bar
In Flight: displays aircraft flight status and various warning messages.
3.
Battery Information
80 31'59": displays the current battery level and remaining flight time. Tap to view more
information about the battery.
4.
Video Downlink Signal Strength
: displays the video downlink signal strength between the aircraft and the remote
controller.
5.
Vision System Status
: the left side of the icon indicates the status of the horizontal vision system and the
right side of the icon indicates the status of the upward and downward vision systems. The
icon is white when the vision system is working normally and turns red when the vision
system is unavailable.
6.
GNSS Status
: displays the current GNSS signal strength. Tap to check the GNSS signal status. The
Home Point can be updated when the icon is white, which indicates the GNSS signal is
strong.
92
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
7.
Settings
: tap to view or set parameters for safety, control, camera, and transmission. Refer to
the Settings section for more information.
8.
Shooting Modes
Photo: Single, Explore, AEB, Burst Shooting, and Time Shot.
Video: Normal, Night, Explore, and Slow Motion.
MasterShots: drag-select a subject. The aircraft will record while executing
different maneuvers in sequence and keep the subject in the center of the frame.
A short cinematic video will be generated afterward.
QuickShots: Dronie, Rocket, Circle, Helix, Boomerang, and Asteroid.
Hyperlapse: Free, Circle, Course Lock, and Waypoints.
Pano: Sphere, 180°, Wide Angle, and Vertical. The aircraft will automatically
take several photos and synthesize a panoramic photo based on the selected
panoramic photo type.
• Explore mode uses the tele and medium tele cameras of Mavic 3 Pro as a safer way
to explore views from farther distances. In Explore mode, users can use the hybrid
zoom in any of the following ways:
a. Tap the zoom button and switch between a series of zooms, including 1x, 3x, 7x,
14x, and 28x.
b. Tap and hold the zoom button and drag up and down to adjust camera zoom.
c. Use two fingers on the screen to zoom in or out.
d. Use the camera control dial of the remote controller to zoom in or out.
• Night Shots provides better noise reduction and cleaner footage, supports up to
12800 ISO.
• Night Shots currently supports 4K 24/25/30fps.
• Obstacle sensing will be disabled in Night Shots. Fly with caution.
• Night Shots will be exited automatically when RTH or landing is started.
• During RTH or auto landing, Night Shots is not available.
• FocusTrack is not supported in Night Shots.
9.
Camera Switch/Focus Button
Tap 7 to switch to the tele camera, and tap
to switch to the Hasselblad camera.
to switch to the medium tele camera. Tap
x
Press and hold the camera button to bring up the zoom bar and adjust the digital zoom.
• Digital zoom is only supported in Normal video and Explore mode.
• When zooming in or out, the larger the zoom ratio, the slower the aircraft will
rotate, to achieve a smooth view.
AF/MF: tap to switch between AF and MF. Press and hold the icon to display the focus bar.
© 2023 DJI All Rights Reserved.
93
DJI Mavic 3 Pro User Manual
10. Shutter/Record Button
: tap to take a photo or to start or stop recording a video.
11. Playback
: tap to enter playback and preview photos and videos as soon as they are captured.
12. Camera Modes Switch
: tap to switch between Auto and Pro mode. Different parameters can be set in different
modes.
13. Shooting Parameters
RES&FPS
4K 60
: displays the current shooting parameters. Tap to access parameter settings.
14. Storage Information
1:30:30 : displays the remaining number of photos or videos recording time of the current
storage. Tap to view the available capacity of the microSD card or the aircraft internal
storage.
Storage
15. Flight Telemetry
Displays the horizontal distance (D) and speed as well as vertical distance (H) and speed
between the aircraft and the Home Point.
16. Map/Altitude indicator/Vision Assist
: tap to expand to the mini map, and tap the center of the mini map to switch from the
camera view to the map view. The mini map can be switched to the attitude indicator.
•
Mini Map: displays the map in the bottom left corner of the screen so that the user can
simultaneously check the camera view, the real-time position and orientation of the
aircraft and the remote controller, the Home Point location, and flight paths, etc.
Locked to North
Smart Scale
Switch to Attitude Indicator
Collapse
•
94
Locked to North
North is locked on the map with North pointing upward in the map
view. Tap to switch from Lock to North to the remote controller
orientation where the map rotates when the remote controller
changes the orientation.
Smart Scale
tap the +/- icon to slightly zoom in or out.
Switch to Attitude
Indicator
tap to switch from the mini map to the attitude indicator.
Collapse
tap to minimize the map.
Attitude Indicator: displays the attitude indicator in the bottom left corner of the screen
so that the user can simultaneously check the camera view, the relative location and
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
orientation of the aircraft and the remote controller, the Home Point location, and the
aircraft horizontal attitude information, etc. The attitude indicator supports displaying
the aircraft or the remote controller as the center.
Aircraft Orientation
Switch to the remote
controller as the center
Remote controller
Home Point
Aircraft Horizontal
Attitude
Switch to the aircraft
as the center
Switch to the Vision Assist
Collapse
Aircraft as the Center
Remote Controller as the Center
Switch to the
Tap to switch to aircraft/remote controller as the center of the attitude
aircraft/remote indicator.
controller as the
center
•
Aircraft
Orientation
Indicates the aircraft orientation. When the aircraft is displayed as the
center of the attitude indicator and the user is changing the aircraft
orientation, all the other elements on the attitude indicator will rotate
around the aircraft icon. The arrow direction of the aircraft icon stays
unchanged.
Aircraft
Horizontal
Attitude
Indicates the aircraft horizontal attitude information (including pitch
and roll). The deep cyan area is horizontal and in the center of the
attitude indicator when the aircraft hovers in place. If not, it indicates
that the wind is changing the aircraft attitude. Fly with caution. The
deep cyan area changes in real time based on the aircraft horizontal
attitude.
Switch to the
Vision Assist
Tap to switch from the altitude indicator to the vision assist view.
Collapse
Tap to minimize the attitude indicator.
Home Point
The location of the Home Point. To manually control the aircraft to
return home, adjust the aircraft orientation to point towards the Home
Point first.
Remote
Controller
The dot indicates the remote controller location, while the arrow on
the dot indicates the remote controller orientation. Adjust the remote
controller orientation during the flight to make sure the arrow points
towards the aircraft icon for optimal signal transmission.
Vision Assist: the vision assist view, powered by the horizontal vision system, changes
the horizontal speed direction (forward, backward, left, and right) to help users navigate
and observe obstacles during flight.
© 2023 DJI All Rights Reserved.
95
DJI Mavic 3 Pro User Manual
Vision Assist View
Direction
Max
Horizontal Speed of
the Aircraft
Locked
Switch to the Mini
Map
Collapse
Horizontal Speed of the
Aircraft
The direction of the line indicates the current horizontal
direction of the aircraft, and the length of the line indicates
the horizontal speed of the aircraft.
Vision Assist View Direction Indicates the direction of the vision assist view. Tap and hold
to lock the direction.
Switch to the Mini Map
Tap to switch from the vision assist view to the mini map.
Collapse
Tap to minimize the vision assist view.
Max
Tap to maximize the vision assist view.
Locked
Indicates that the direction of the vision assist view is locked.
Tap to cancel the lock.
17. Auto Takeoff/Landing/RTH
/ : tap the icon. When the prompt appears, press and hold the button to initiate auto
takeoff or landing.
: tap to initiate Smart RTH and have the aircraft return to the last recorded Home Point.
18. Waypoint Flight
: tap to enable/disable Waypoint Flight.
19. Back
: tap to return to the home screen.
96
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Screen Shortcuts
Tap to Aim
During flight double-tap the point of interest on the screen, the aircraft will automatically move
the point of interest to the center of the frame.
Gimbal Angle Adjustment
Press and hold on the screen to bring up the gimbal adjustment bar to adjust the gimbal angle.
Focus/Spot Metering
Tap on the screen to enable focus or spot metering. Focus or spot metering will display
differently depending on the shooting mode, focus mode, exposure mode, and spot metering
mode.
After using spot metering:
•
Drag
•
Press and hold on the screen to lock the exposure. To unlock the exposure, tap and hold on
the screen again or tap on another area of the screen.
next to the box up and down to adjust the EV (exposure value).
© 2023 DJI All Rights Reserved.
97
DJI Mavic 3 Pro User Manual
Settings
Safety
•
Flight Assistance
Obstacle Avoidance Horizontal vision system is enabled after setting Obstacle Avoidance
Action
Action to Bypass or Brake. The aircraft cannot sense obstacles if
Obstacle Avoidance is disabled.
Bybassing Options
Select Normal or Nifty mode when using Bypass.
Display Radar Map
When enabled, the real-time obstacle detection radar map will be
displayed.
•
Return to Home (RTH): tap to set Advanced RTH, Auto RTH Altitude, and to update the Home
Point.
•
AR Settings: enable display of AR Home Point, AR RTH Route, and AR Aircraft Shadow.
•
Flight Protection: tap to set the max altitude and the max distance for flights.
•
Sensors: tap to view the IMU and compass statuses and start calibration if necessary.
•
Battery: tap to view battery information such as battery cell status, serial number, and
number of times charged.
•
Auxiliary LED: tap to set the auxiliary LED to auto, on, or off. DO NOT turn on the Auxiliary
LED before takeoff.
•
Aircraft Front Arm LEDs: tap to set the aircraft front arm LEDs to auto or on. In auto mode,
the aircraft front LEDs will be disabled during shooting to ensure the quality is not affected.
•
Unlock GEO Zone: tap to view information about unlocking GEO Zones.
•
Find My Drone: this feature helps to find the location of the aircraft, either by enabling the
aircraft LEDs, beeping, or by using the map.
•
Advanced Safety Settings
Signal Lost
The behavior of the aircraft when the remote controller signal is lost
can be set to RTH, Descend, or Hover.
Emergency
Propeller Stop
Emergency Only, indicates that the motors can only be stopped
by performing a combination stick command (CSC) mid-flight in
an emergency situation such as if there is a collision, a motor has
stalled, the aircraft is rolling in the air, or the aircraft is out of control
and is ascending or descending very quickly. Anytime, indicates that
the motors can be stopped mid-flight anytime once user performs a
CSC.
Stopping the motors mid-flight will cause the aircraft to crash.
98
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Vision Positioning
and Obstacle
Sensing
When Vision Positioning and Obstacle Sensing are disabled, the
aircraft relies only on GNSS to hover, omnidirectional obstacle
sensing is unavailable, and the aircraft will not automatically
decelerate during descent close to the ground. Extra caution is
required when Vision Positioning and Obstacle Sensing are disabled.
Vision Positioning and Obstacle Sensing can be temporarily disabled
in clouds and fog or when an obstacle is detected when landing.
Keep Vision Positioning and Obstacle Sensing enabled in regular
flight scenarios. Vision Positioning and Obstacle Sensing are enabled
by default after restarting the aircraft.
Vision Positioning and Obstacle Sensing are only available when
flying manually and are unavailable in modes such as RTH, auto
landing, and Intelligent Flight Mode.
Airsense
An alert will appear in DJI Fly when a manned aircraft is detected if
AirSense is enabled. Read the disclaimer in the DJI Fly prompt before
using AirSense.
Control
•
Aircraft Settings
Units
Can be set to metric or imperial.
Subject Scanning
When enabled, the aircraft automatically scans and displays
subjects in the camera view (only available for single-shot and
normal video modes).
Gain and Expo Tuning
Supports the gain and expo settings to be fine-tuned for the
aircraft and the gimbal in different flight modes, including the
max horizontal speed, max ascent speed, max descent speed,
max angular velocity, yaw smoothness, brake sensitivity, expo,
and the gimbal max tilt control speed and tilt smoothness.
• When releasing the control stick, an increased brake sensitivity reduces the braking
distance of the aircraft, while a decreased brake sensitivity increases the braking
distance. Fly with caution.
•
Gimbal Settings: tap to set the gimbal mode, perform gimbal calibration, and recenter or
move the gimbal downward.
•
Remote Controller Settings: tap to set the function of the customizable button, calibrate the
remote controller, switch control stick modes. Make sure to understand the operations of a
stick mode before changing the control stick mode.
•
Flight Tutorial: view the flight tutorial.
•
Re-pair to Aircraft (Link): tap to start linking when the aircraft is not linked to the remote
controller.
© 2023 DJI All Rights Reserved.
99
DJI Mavic 3 Pro User Manual
Camera
•
•
Camera Parameter Settings: displays different settings according to the shooting mode.
Shooting Modes
Settings
Photo Mode
Format, Aspect Ratio
Record Mode
Format, Color, Coding Format, Video Bitrate, Video Subtitles
MasterShots
Format, Color, Coding Format, Video Bitrate, Video Subtitles
QuickShots
Format, Color, Coding Format, Video Bitrate, Video Subtitles
Hyperlapse
Photo Type, Shot Frame, Format
Pano
Photo Type
General Settings
Anti-Flicker
When enabled, the footage flicker caused by the light source will
be reduced when shooting in environments with lights.
In Pro mode, anti-flicker will only take effect when shutter
speed and ISO are set to auto.
Histogram
When enabled, users can check the screen to view whether the
exposure is appropriate.
Peaking Level
When enabled in MF mode, the objects in focus will be outlined
in red. The higher the peaking level, the thicker the outline.
Overexposure Warning
When enabled, the overexposure area will be indentified with
diagnol lines.
Gridlines
Enable gridlines such as diagonal lines, nine-square grids, and
center point.
Frame Guide
When the frame guide is enabled, a shadow mask is displayed
on the live view to assist users in composing the image.
The frame guide has no effect on the shooting ratio and can
only be seen in the recording mode.
White Balance
•
Set to auto, or manually adjust the color temperature.
Storage
Storage
Store the recorded files to the microSD card on the aircraft or
the internal storage of the aircraft.
Mavic 3 Pro has an internal storage of 8 GB. While Mavic 3 Pro
Cine has a built-in 1TB SSD.
100
Custom Folder Naming
When changed, a new folder will be automatically created on the
aircraft storage to store future files.
Custom File Naming
When changed, the new name will be applied to future files on
the aircraft storage.
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Cache When Recording
When enabled, the liveview on the remote controller will be
stored in the remote controller storage when recording video.
Max Video Cache
Capacity
When the cache limit is reached, the earliest caches will be
automatically deleted.
•
Reset Camera Settings: tap to restore camera parameters to the default settings.
•
USB Mode: Mavic 3 Pro Cine supports USB mode, enabling users to copy footage when the
battery level of the aircraft is low. Power on the aircraft, enable USB mode in DJI Fly, and
connect the aircraft to a computer to use USB mode. During this time, the storage of the
aircraft can be accessed.
Disconnect the aircraft from the computer and restart the aircraft to exit USB mode. USB
mode will be enabled once again when the aircraft is restarted and connected to a computer
if it was disabled via DJI Assistant 2.
• In USB mode, the aircraft will disconnect from the remote controller, the frame arm
light will turn off, and the fan inside the aircraft will stop.
Transmission
A livestreaming platform can be selected to broadcast the camera view in real time. The HDMI
output, frequency band, and channel mode can also be set in the transmission settings.
• Live streaming platforms and HDMI output are not supported when using DJI RC.
About
Displays information such as the Device Name, Wi-Fi Name, Model, App Version, Aircraft
Firmware, RC Firmware, FlySafe Data, SN, etc.
Tap Reset All Settings to reset settings including camera, gimbal and safety settings to default.
Tap Clear All Data to reset all settings to default, and delete all the data stored in internal
storage and microSD card, including flight log. It is recommended to provide proof (flight log)
when claiming compensation. Contact DJI support before clearing the flight log if an accident
occurs during flight.
• Fully charge the device before launching DJI Fly.
• Mobile cellular data is required when using DJI Fly. Contact your wireless carrier for data
charges.
• DO NOT accept phone calls or use texting features during flight if you are using a
mobile phone as your display device.
• Read all safety prompts, warning messages, and disclaimers carefully. Familiarize
yourself with relevant regulations in your area. You are solely responsible for being
aware of all relevant regulations and flying in a way that is compliant.
© 2023 DJI All Rights Reserved.
101
DJI Mavic 3 Pro User Manual
a. Read and understand the warning messages before using the auto-takeoff and autolanding features.
b. Read and understand the warning messages and disclaimers before setting the
altitude beyond the default limit.
c. Read and understand the warning messages and disclaimers before switching flight
modes.
d. Read and understand the warning messages and disclaimer prompts near or in GEO
zones.
e. Read and understand the warning messages before using the Intelligent Flight
modes.
• Land the aircraft immediately at a safe location if a prompt appears in the app
instructing you to do so.
• Review all warning messages on the checklist displayed in the app before each flight.
• Use the in-app tutorial to practice your flight skills if you have never operated the
aircraft or if you do not have sufficient experience to operate the aircraft with
confidence.
• The app is designed to assist your operation. Use sound discretion and DO NOT rely on
the app to control the aircraft. The use of the app is subject to DJI Fly Terms of Use and
DJI Privacy Policy. Read them carefully in the app.
102
© 2023 DJI All Rights Reserved.
Appendix
© 2023 DJI All Rights Reserved.
103
DJI Mavic 3 Pro User Manual
Appendix
Specifications
Aircraft
Takeoff Weight
Mavic 3 Pro: 958 g
Mavic 3 Pro Cine: 963 g
Dimensions
Folded (without propellers): 231.1×98×95.4 mm
Unfolded (without propellers): 347.5×290.8×107.7 mm
Max Ascent Speed
8 m/s
Max Descent Speed
6 m/s
Max Horizontal Speed (at sea 21 m/s
level, no wind)
Max Takeoff Altitude
6000 m
Max Flight Time[1]
43 minutes
[2]
Max Hovering Time
37 minutes
Max Flight Distance
28 km
Max Wind Speed Resistance
12 m/s
Max Tilt Angle
35°
Operating Temperature
-10° to 40° C (14° to 104° F)
GNSS
GPS + Galileo + BeiDou
Hovering Accuracy Range
Vertical: ±0.1 m (with vision positioning), ±0.5 m (with GNSS
positioning)
Horizontal: ±0.3 m (with vision positioning), ±0.5 m (with highprecision positioning system)
Internal Storage
Mavic 3 Pro: 8 GB (approx. 7.9GB available space)
Mavic 3 Pro Cine: 1 TB (approx. 934.8GB available space)
Camera
Image Sensor
Hasselblad Camera: 4/3 CMOS, Effective Pixels: 20 MP
Medium Tele Camera: 1/1.3-inch CMOS, Effective Pixels: 48 MP
Tele Camera: 1/2-inch CMOS, Effective Pixels: 12 MP
Lens
Hasselblad Camera
FOV: 84°
Format Equivalent: 24 mm
Aperture: f/2.8-f/11
Focus: 1 m to ∞
Medium Tele Camera
FOV: 35°
Format Equivalent: 70 mm
Aperture: f/2.8
Focus: 3 m to ∞
104
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Tele Camera
FOV: 15°
Format Equivalent: 166 mm
Aperture: f/3.4
Focus: 3 m to ∞
ISO Range
Video
Normal and Slow Motion:
100-6400 (Normal)
400-1600 (D-Log)
100-1600 (D-Log M)
100-1600 (HLG)
Night:
800-12800 (Normal)
Photo
100-6400
Shutter Speed
Hasselblad Camera: 8-1/8000 s
Medium Tele Camera: 2-1/8000 s
Tele Camera: 2-1/8000 s
Max Image Size
Hasselblad Camera: 5280×3956
Medium Tele Camera: 8064×6048
Tele Camera: 4000×3000
Still Photography Modes
Hasselblad Camera
Single Shot: 20 MP
Burst Shooting: 20 MP, 3/5/7 frames
Automatic Exposure Bracketing (AEB): 20 MP, 3/5 frames at 0.7
EV step
Timed: 20 MP, 2/3/5/7/10/15/20/30/60 s
Medium Tele Camera
Single Shot: 12 MP or 48 MP
Burst Shooting: 12 MP or 48 MP, 3/5/7 frames
Automatic Exposure Bracketing (AEB): 12 MP or 48 MP, 3/5
frames at 0.7 EV step
Timed:
12 MP: 2/3/5/7/10/15/20/30/60 s
48 MP: 7/10/15/20/30/60 s
Tele Camera
Single Shot: 12 MP
Burst Shooting: 12 MP, 3/5/7 frames
Automatic Exposure Bracketing (AEB): 12 MP, 3/5 frames at 0.7
EV step
Timed: 12 MP, 2/3/5/7/10/15/20/30/60 s
Photo Format
JPEG/DNG (RAW)
© 2023 DJI All Rights Reserved.
105
DJI Mavic 3 Pro User Manual
Video Resolution[8]
Hasselblad Camera
Apple ProRes 422 HQ
Apple ProRes 422
Apple ProRes 422 LT
5.1K: 5120×2700@24/25/30/48/50fps
DCI 4K: 4096×2160@24/25/30/48/50/60/120*fps
4K: 3840×2160@24/25/30/48/50/60/120*fps
H.264/H.265
5.1K: 5120×2700@24/25/30/48/50fps
DCI 4K: 4096×2160@24/25/30/48/50/60/120*fps
4K: 3840×2160@24/25/30/48/50/60/120*fps
FHD: 1920×1080@24/25/30/48/50/60/120*/200*fps
* Recording frame rates. The corresponding video plays as slow-motion
video.
Medium Tele Camera
Apple ProRes 422 HQ
Apple ProRes 422
Apple ProRes 422 LT
4K: 3840×2160@24/25/30/48/50/60fps
H.264/H.265
4K: 3840×2160@24/25/30/48/50/60fps
FHD: 1920×1080@24/25/30/48/50/60fps
Tele Camera
Apple ProRes 422 HQ
Apple ProRes 422
Apple ProRes 422 LT
4K: 3840×2160@24/25/30/48/50/60fps
H.264/H.265
4K: 3840×2160@24/25/30/50/60fps
FHD: 1920×1080@24/25/30/50/60fps
Video Format[8]
MP4/MOV (MPEG-4 AVC/H.264, HEVC/H.265)
MOV (Apple ProRes 422 HQ/422/422 LT)
Max Video Bitrate[8]
H.264/H.265: 200 Mbps
Apple ProRes 422 HQ: 3772 Mbps
Apple ProRes 422: 2514 Mbps
Apple ProRes 422 LT: 1750 Mbps
Supported File System
exFAT
106
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Color Mode and Sampling
Method[8]
Hasselblad Camera
Normal:
10-bit 4:2:2 (Apple ProRes 422 HQ/422/422 LT)
8-bit 4:2:0 (H.264/H.265)
D-Log:
10-bit 4:2:2 (Apple ProRes 422 HQ/422/422 LT)
10-bit 4:2:0 (H.264/H.265)
HLG/D-Log M:
10-bit 4:2:2 (Apple ProRes 422 HQ/422/422 LT)
10-bit 4:2:0 (H.265)
Medium Tele Camera
Normal:
10-bit 4:2:2 (Apple ProRes 422 HQ/422/422 LT)
8-bit 4:2:0 (H.264/H.265)
HLG/D-Log M:
10-bit 4:2:2 (Apple ProRes 422 HQ/422/422 LT)
10-bit 4:2:0 (H.265)
Tele Camera
Normal:
10-bit 4:2:2 (Apple ProRes 422 HQ/422/422 LT)
8-bit 4:2:0 (H.264/H.265)
HLG/D-Log M:
10-bit 4:2:2 (Apple ProRes 422 HQ/422/422 LT)
10 -bit 4:2:0 (H.265)
Digital Zoom (only in Normal
Video Mode and Explore
Mode)
Hasselblad Camera: 1-3×
Medium Tele Camera: 3-7×
Tele Camera: 7-28×
Gimbal
Stabilization
3-axis mechanical gimbal (tilt, roll, pan)
Mechanical Range
Tilt: -140° to 50°
Roll: -50° to 50°
Pan: -23° to 23°
Controllable Range
Tilt: -90° to 35°
Pan: -5° to 5°
Max Control Speed (tilt)
100°/s
Angular Vibration Range
Hovering Without Wind: ±0.001°
Normal Mode: ±0.003°
Sport Mode: ±0.005°
Sensing
Sensing Type
Omnidirectional binocular vision system, supplemented with
an infrared sensor at the bottom of the aircraft
© 2023 DJI All Rights Reserved.
107
DJI Mavic 3 Pro User Manual
Forward
Measurement Range: 0.5-20 m
Detection Range: 0.5-200 m
Effective Sensing Speed: Flight Speed ≤ 15 m/s
FOV: Horizontal 90°, Vertical 103°
Backward
Measurement Range: 0.5-16 m
Effective Sensing Speed: Flight Speed ≤ 12 m/s
FOV: Horizontal 90°, Vertical 103°
Lateral
Measurement Range: 0.5-25 m
Effective Sensing Speed: Flight Speed ≤ 15 m/s
FOV: Horizontal 90°, Vertical 85°
Upward
Measurement Range: 0.2-10 m
Effective Sensing Speed: Flight Speed ≤ 6 m/s
FOV: Front and Back 100°, Left and Right 90°
Downward
Measurement Range: 0.3-18 m
Effective Sensing Speed: Flight Speed ≤ 6 m/s
FOV: Front and Back 130°, Left and Right 160°
Operating Environment
Forward, Backward, Left, Right, and Upward: surfaces with
discernible patterns and adequate lighting (lux > 15)
Downward: surfaces with discernible patterns, diffuse
reflectivity > 20% (e.g. walls, trees, people), and adequate
lighting (lux > 15)
Video Transmission
Video Transmission System
O3+
Live View Quality
Remote Controller: 1080p/30fps, 1080p/60fps
Operating Frequency[3]
2.400-2.4835 GHz, 5.725-5.850 GHz
Transmitter Power (EIRP)
2.4 GHz: <33 dBm (FCC), <20 dBm (CE/SRRC/MIC)
5.8 GHz: <33 dBm (FCC), <14 dBm (CE), <30 dBm (SRRC)
Max Transmission Distance
(unobstructed, free of
interference)[4]
15 km (FCC), 8 km (CE/SRRC/MIC)
Max Transmission Distance
(unobstructed, with
interference)[5]
Strong Interference: urban landscape, approx. 1.5-3 km
Medium Interference: suburban landscape, approx. 3-9 km
Low Interference: suburb/seaside, approx. 9-15 km
Max Transmission
Distance (obstructed, with
interference)[6]
Low Interference and Obstructed by Buildings: approx. 0-0.5
km
Low Interference and Obstructed by Trees: approx. 0.5-3 km
108
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Max Download Speed
O3+:
5.5 MB/s (with DJI RC-N1 Remote Controller)
15 MB/s (with DJI RC Pro)
5.5 MB/s (with DJI RC)
Wi-Fi 6: 80 MB/s*
* Measured in a laboratory environment with little interference in
countries/regions that support both 2.4 GHz and 5.8 GHz, with footage
saved to the internal storage. Download speeds may vary depending
on the actual conditions.
Lowest Latency[7]
130 ms (with DJI RC-N1 Remote Controller)
120 ms (with DJI RC Pro)
130 ms (with DJI RC)
Antenna
4 antennas, 2T4R
Storage
Recommended microSD
Cards
Lexar 1066x 64GB V30 A2 microSDXC
Lexar 1066x 128GB V30 A2 microSDXC
Lexar 1066x 256GB V30 A2 microSDXC
Lexar 1066x 512GB V30 A2 microSDXC
SanDisk High Endurance 64GB V30 microSDXC
SanDisk High Endurance 128GB V30 microSDXC
SanDisk High Endurance 256GB V30 microSDXC
Kingston Canvas Go! Plus 64GB V30 A2 microSDXC
Kingston Canvas Go! Plus 128GB V30 A2 microSDXC
Kingston Canvas Go! Plus 256GB V30 A2 microSDXC
Kingston Canvas Go! Plus 512GB V30 A2 microSDXC
Samsung EVO Plus 512GB V30 A2 microSDXC
Samsung PRO Plus 256GB V30 A2 microSDXC
Samsung PRO Plus 512GB V30 A2 microSDXC
Intelligent Flight Battery
Capacity
5000 mAh
Weight
335.5 g
Nominal Voltage
15.4 V
Max Charging Voltage
17.6 V
Type
Li-ion 4S
Chemical System
LiCoO2
Energy
77 Wh
Charging Temperature
5° to 40° C (41° to 104° F)
Charging Time
Use the included data cable of the DJI 65W Portable Charger:
Approx. 96 minutes
Use the DJI 100W USB-C Power Adapter and DJI Mavic 3 Series
100W Battery Charging Hub:
Approx. 70 minutes
© 2023 DJI All Rights Reserved.
109
DJI Mavic 3 Pro User Manual
Charger
Input
DJI 65W Portable Charger: 100-240 V AC, 50-60 Hz, 2 A
DJI 100W USB-C Power Adapter: 100-240 V AC, 50-60 Hz, 2.5 A
Output
DJI 65W Portable Charger:
USB-C: 5 V 5 A / 9 V 5 A / 12 V
A / 5 V~20 V 3.25 A
USB-A:
5.0 V 2.0 A
5 A / 15 V
4.3 A / 20 V
3.25
DJI 100W USB-C Power Adapter:
Max 100 W (total)
When both ports are used, the max output power of one port
is 82 W, and the charger will dynamically allocate the output
power of the two ports according to the power load.
Rated Power
DJI 65W Portable Charger: 65 W
DJI 100W USB-C Power Adapter: 100 W
DJI RC Pro
Operating Temperature
-10° to 40° C (14° to 104° F)
GNSS
GPS + Galileo + GLONASS
Battery
Li-ion (5000 mAh @ 7.2 V)
Battery Type
Li-ion
Chemical System
LiNiMnCoO2
Operating Time
Approx. 3 hours
Storage Capacity
Internal Storage (ROM): 32 GB
Support microSD card to expand capacity
Video Transmission
Video Transmission System
O3+
Operating Frequency[3]
2.400-2.4835 GHz, 5.725-5.850 GHz
Transmitter Power (EIRP)
2.4 GHz: <33 dBm (FCC), <20 dBm (CE/SRRC/MIC)
5.8 GHz: <33 dBm (FCC), <14 dBm (CE), <23 dBm (SRRC)
Wi-Fi
Protocol
802.11 a/b/g/n/ac/ax
Support 2×2 MIMO Wi-Fi
Operating Frequency[3]
2.400-2.4835 GHz, 5.725-5.850 GHz
Transmitter Power (EIRP)
2.4 GHz: <26 dBm (FCC), <20 dBm (CE/SRRC/MIC)
5.8 GHz: <26 dBm (FCC/SRRC), <14 dBm (CE)
Bluetooth
Protocol
Bluetooth 5.1
Operating Frequency
2.400-2.4835 GHz
Transmitter Power (EIRP)
<10 dBm
110
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
DJI RC
Operating Temperature
-10° to 40° C (14° to 104° F)
GNSS
GPS + Galileo + BeiDou
Battery
5200 mAh
Battery Type
Li-ion
Chemical System
LiNiMnCoO2
Operating Time
Approx. 4 hours
Storage Capacity
Support microSD card to expand capacity
Video Transmission
Video Transmission System
When used with different aircraft hardware configurations,
the DJI RC Remote Controller will automatically select the
corresponding firmware version for updating. It supports the
O3+ transmission technology when linked with DJI Mavic 3 Pro.
Operating Frequency[3]
2.400-2.4835 GHz, 5.725-5.850 GHz
Transmitter Power (EIRP)
2.4 GHz: <26 dBm (FCC), <20 dBm (CE/SRRC/MIC)
5.8 GHz: <26 dBm (FCC), <14 dBm (CE), <23 dBm (SRRC)
Wi-Fi
Protocol
802.11 a/b/g/n
Operating Frequency[3]
2.400-2.4835 GHz, 5.150-5.250 GHz, 5.725-5.850 GHz
Transmitter Power (EIRP)
2.4 GHz: <23 dBm (FCC), <20 dBm (CE/SRRC/MIC)
5.1 GHz: <23 dBm (FCC/CE/SRRC/MIC)
5.8 GHz: <23 dBm (FCC/SRRC), <14 dBm (CE)
Bluetooth
Protocol
Bluetooth 4.2
Operating Frequency
2.400-2.4835 GHz
Transmitter Power (EIRP)
<10 dBm
[1] Measured in a controlled test environment. Specific test conditions are as follows: flying at a constant
speed of 32.4 kph in a windless environment at sea level, with APAS off, AirSense off, camera parameters
set to 1080p/24fps, video mode off, and from 100% battery level until 0%. Results may vary depending on
the environment, actual use, and firmware version.
[2] Measured in a controlled test environment. Specific test conditions are as follows: hovering in a windless
environment at sea level, with APAS off, AirSense off, camera parameters set to 1080p/24fps, video mode
off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use,
and firmware version.
[3] In some countries and regions, the 5.8 and 5.1GHz frequencies are prohibited, or the 5.1GHz frequency is
only allowed for indoor use. Check local laws and regulations for more information.
[4] Measured in an unobstructed outdoor environment free of interference. The above data shows the
farthest communication range for one-way, non-return flights under each standard. During your flight,
please pay attention to RTH reminders in the DJI Fly app.
[5] Data tested under FCC standard in unobstructed environments with typical interference. Used for
reference purposes only and provides no guarantee for actual transmission distance.
[6] Data tested under FCC standard in environments with typical low interference. Used for reference
purposes only and provides no guarantee for actual transmission distance.
[7] Depending on the actual environment and mobile device.
[8] Only DJI Mavic 3 Pro Cine supports Apple ProRes video recording.
© 2023 DJI All Rights Reserved.
111
DJI Mavic 3 Pro User Manual
Camera Function Matrix
Photo
Video
Hasselblad Camera
Medium Tele
Camera
Tele Camera
Single Shot
√
√
√
Burst Shooting
√
√
√
AEB
√
√
√
Timed
√
√
√
DNG
√
√
√
Pano
√
Sphere Panorama*
×
Hyperlapse
√
√
×
Slow Motion
4K 120fps
C4K 120fps
1080p 200fps
×
×
Color Mode
Hasselblad HNCS
D-Log
D-Log M
HLG
Normal
D-Log M
HLG
Normal
D-Log M
HLG
Night Shots
√
√
×
QuickShots
√
√
×
MasterShots
√
√
×
√
Only supports
Spotlight and POI,
ActiveTrack is not
supported
FocusTrack
√
* The medium tele camera only supports shooting video but not compositing when shooting spherical
panoramas. Users can manually composite images.
112
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
Firmware Update
Use DJI Fly or DJI Assistant 2 (Consumer Drones Series) to update the aircraft firmware.
Using DJI Fly
When connecting the aircraft or remote controller to DJI Fly, you will be notified if a new
firmware update is available. To start updating, connect your remote controller or mobile device
to the internet and follow the on-screen instructions. Note that you cannot update the firmware
if the remote controller is not linked to the aircraft. An internet connection is required.
Using DJI Assistant 2 (Consumer Drones Series)
Update the aircraft and remote controller firmware separately using DJI Assistant 2 (Consumer
Drones Series).
Follow the instructions below to update the aircraft firmware:
1. Launch DJI Assistant 2 (Consumer Drones Series) and log in with your DJI account.
2. Power on the aircraft and connect the aircraft to the computer via the USB-C port within 20
seconds.
3. Select DJI Mavic 3 Pro and click Firmware Updates.
4. Select the firmware version.
5. Wait for the firmware to download. The firmware update will start automatically.
6. The aircraft will reboot automatically after the firmware update is complete.
Follow the instructions below to update the remote controller firmware:
1. Launch DJI Assistant 2 (Consumer Drones Series) and log in with your DJI account.
2. Power on the remote controller and connect it to the computer via the USB-C port.
3. Select DJI Mavic 3 Pro Remote Controller and click Firmware Updates.
4. Select the firmware version.
5. Wait for the firmware to download. The firmware update will start automatically.
6. Wait for the firmware update to be completed.
• The battery firmware is included in the aircraft firmware. Be sure to update all batteries.
• Make sure follow all the steps to update firmware. Otherwise, the update may fail.
• Make sure the computer is connected to the internet during the update.
• Before performing an update, make sure the Intelligent Flight Battery is at least 40%
charged and the remote controller is at least 30% charged.
• DO NOT unplug the USB-C cable during an update.
• The firmware update will take approximately ten minutes. It is normal that the gimbal
goes limp, aircraft status indicators blink, and the aircraft reboots. Wait patiently until
the update is complete.
Refer to the Mavic 3 Pro Release Notes for more firmware update information for Traceability.
© 2023 DJI All Rights Reserved.
113
DJI Mavic 3 Pro User Manual
Post-Flight Checklist
•
Make sure to perform a visual inspection so that the aircraft, remote controller, gimbal
camera, Intelligent Flight Batteries, and propellers are in good condition. Contact DJI support
if any damage is noticed.
•
Make sure that the camera lens and vision system sensors are clean.
•
Make sure to store aircraft correctly before transporting it.
Maintenance Instructions
To avoid serious injury to children and animals, observe the following rule:
1.
Small parts, such as cables and straps, are dangerous if swallowed. Keep all parts out of
reach of children and animals.
2.
Store the Intelligent Flight Battery and remote controller in a cool, dry place away from
direct sunlight to ensure the built-in LiPo battery does NOT overheat. Recommended
storage temperature: between 22° and 28° C (71° and 82° F) for storage periods of more
than three months. Never store in environments outside the temperature range of 14° to
113° F (-10° to 45° C).
3.
DO NOT allow the camera to come into contact with or become immersed in water or
other liquids. If it gets wet, wipe dry with a soft, absorbent cloth. Turning on an aircraft that
has fallen in water may cause permanent component damage. DO NOT use substances
containing alcohol, benzene, thinners, or other flammable substances to clean or maintain
the camera. DO NOT store the camera in humid or dusty areas.
4.
DO NOT connect this product to any USB interface older than version 3.0. DO NOT connect
this product to any “power USB” or similar devices.
5.
Check every aircraft part after any crash or serious impact. If there are any problems or
questions, contact a DJI authorized dealer.
6.
Regularly check the Battery Level Indicators to see the current battery level and overall
battery life. The battery is rated for 200 cycles. It is not recommended to continue use
afterward.
7.
Make sure to transport the aircraft with the arms folded when powered off.
8.
Make sure to transport the remote controller with antennas folded when powered off.
9.
The battery will enter sleep mode after long-term storage. Charge the battery to exit from
sleep mode.
10. Use the ND filter if the exposure time needs to prolonged. Refer to the product information
on how to install the ND filters.
11. Store and transport the aircraft, remote controller, battery, and charger in a dry
environment. It is recommended to store and transport the product in an environment with
an ambient temperature of 15° to 25° C and a humidity of about 40%.
12. Remove the battery before servicing the aircraft (e.g., cleaning or attaching and detaching
the propellers). Make sure that the aircraft and the propellers are clean by removing any
dirt or dust with a soft cloth. Do not clean the aircraft with a wet cloth or use a cleanser that
114
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
contains alcohol. Liquids can penetrate the aircraft housing, which can cause a short circuit
and destroy the electronics.
13. Make sure to turn off the battery to replace or to check the propellers.
Troubleshooting Procedures
1.
Why can the battery not be used before the first flight?
The battery must be activated by charging before using it for the first time.
2.
How to solve the gimbal drift issue during flight?
Calibrate IMU and compass in DJI Fly. If the problem persists, contact DJI Support.
3.
No function
Check if the Intelligent Flight battery and the remote controller are activated by charging. If
the problems persist, contact DJI support.
4.
Power-on and start-up problems
Check if the battery has power. If yes, contact DJI support if it cannot be started normally.
5.
SW update issues
Follow the instructions in the user manual to update the firmware. If the firmware update
fails, restart all the devices and try again. If the problem persists, contact DJI support.
6.
Procedures to reset to factory default or last known working configuration
Use the DJI Fly app to reset to factory default.
7.
Shutdown and power-off problems
Contact DJI support.
8.
How to detect careless handling or storage in unsafe conditions
Contact DJI support.
Risk and Warnings
When the aircraft detects a risk after powering on, there will be a warning prompt on DJI Fly.
Pay attention to the list of situations below.
1.
If the location is not suitable for takeoff.
2.
If an obstacle is detected during flight.
3.
If the location is not suitable for landing.
4.
If the compass and IMU experience interference and need to be calibrated.
5.
Follow the on-screen instructions when prompted.
© 2023 DJI All Rights Reserved.
115
DJI Mavic 3 Pro User Manual
Disposal
Observe the local regulations related to electronic devices when disposing of the aircraft and
remote controller.
Battery Disposal
Dispose of the batteries in specific recycling containers only after a complete discharge. DO
NOT dispose of the batteries in regular trash containers. Strictly follow the local regulations
regarding the disposal and recycling of batteries.
Dispose of a battery immediately if it cannot be powered on after over-discharging.
If the power on/off button on the Intelligent Flight Battery is disabled and the battery cannot be
fully discharged, contact a professional battery disposal/recycling agency for further assistance.
C2 Certification
Mavic 3 Pro is comply with C2 certification, there are some requirements and restrictions
when using Mavic 3 Pro in European Economic Area (EEA, i.e. EU plus Norway, Iceland and
Liechtenstein). Mavic 3 Pro/Mavic 3 Pro Cine and its similar products are distinguished by model
name.
UAS Class
C2
Sound Power Level
82 dB
Maximum Propeller Speed
7500 RPM
MTOM Statement
The MTOM of Mavic 3 Pro (Model L2S)/Mavic 3 Pro Cine (Model L2E), including the SD card, is
958 g (Model L2S)/963 g (Model L2E) to comply with C2 requirements.
Users must follow the instructions below to comply with the MTOM C2 requirements.
Otherwise, the aircraft cannot be used as a C2 UAV:
1. DO NOT add any payload to the aircraft, such as the propeller guards, etc.
2. DO NOT use any non-qualified replacement parts, such as Intelligent Flight Batteries or
propellers, etc.
3. DO NOT retrofit the aircraft.
• The prompt "Low Battery RTH" will not appear in case of a horizontal distance between
the pilot and aircraft is lower than 5 m.
• FocusTrack will exit automatically if the horizontal distance between the subject and the
aircraft is further than 50 m (only available when using FocusTrack in the EU).
• The auxiliary LED is set to auto when used in the EU and cannot be changed. The
aircraft Front Arm LEDs are always on when used in the EU and cannot be changed.
116
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
• The maximum flight speed of RTH is 16 m/s, and the maximum flight speed of Waypoint
Flight is 15 m/s.
Direct Remote ID
1. Transport Method: Wi-Fi Beacon
2. Method of uploading the UAS Operator Registration Number to the aircraft: Enter DJI Fly >
Safety > UAS Remote Identification, and then upload UAS Operator Registration Number.
List of Items, including qualified accessories
1. DJI Mavic 3 Low-Noise Propellers (Model: 9453F, 8.5g)
2. DJI Mavic 3 Pro ND Filters Set (ND 8/16/32/64) (5.1 g)
3. DJI Mavic 3 Intelligent Flight Battery (Model: BWX260-5000-15.4, 335.5 g)
List of Spare and Replacement Parts
1. DJI Mavic 3 Low-Noise Propellers (Model: 9453F)
2. DJI Mavic 3 Intelligent Flight Battery (Model: BWX260-5000-15.4)
Remote Controller Warnings
The remote controller indicator will glow red after disconnecting from the aircraft for more than
two seconds.
DJI Fly will prompt a warning after disconnecting from the aircraft for more than 4.5 seconds.
The remote controller will beep and power off automatically after disconnecting from the
aircraft or without operation for a long time.
• Avoid interference between the remote controller and other wireless equipment.
Make sure to turn off the Wi-Fi on nearby mobile devices. Land the aircraft as soon as
possible if there is interference.
• DO NOT operate the aircraft if lighting conditions are too bright or dark when using a
mobile phone to monitor the flight. Users are responsible for correctly adjusting the
display brightness when using the monitor in direct sunlight during flight operation.
• Release the control sticks or press the flight pause button if an unexpected operation
occurs.
GEO Awareness
GEO Awareness contains the features listed below.
UGZ (Unmanned Geographical Zone) Data update: user can update the fly safe data through
GPS by using the data update feature and store the data in the aircraft.
GEO Awareness Map Drawing: after the latest UGZ data is updated, a flight map with a
restricted zone will be displayed in the DJI Fly app. Name, effective time, height limit, etc., can be
viewed by tapping the area.
GEO Awareness Pre-Warning: the app will prompt the user with warning information when the
© 2023 DJI All Rights Reserved.
117
DJI Mavic 3 Pro User Manual
aircraft is near or in a restricted area, the horizontal distance is less than 160 m, or the vertical
distance is less than 40 m from the zone to remind the user to fly with caution.
AGL (Above Ground Level) Statement
The vertical part of ‘‘Geo-awareness’’ may use the AMSL altitude or the AGL height. The choice
between these two references is specified individually for each UGZ. Neither AMSL altitude nor
the AGL height is supported by DJI Mavic 3 Pro. The height H appears in the DJI Fly app camera
view, which is the height from the aircraft takeoff point to the aircraft. The height above the
takeoff point may be used as an approximation but may differ more or less from the given
altitude/height for a specific UGZ. The remote pilot remains responsible for not breaching the
vertical limits of the UGZ.
H
AGL (not supported)
Takeoff
Height error
Restricted Zones
Appear red in the DJI app. Users will be prompted with a warning, and flight is prevented.
UA cannot fly or takeoff in these zones. Restricted Zones may be unlocked, to unlock contact
[email protected] or go to Unlock A Zone at dji.com/flysafe.
20 m
Receiving a warning
100 m
Restricted Zones
When approaching:
1. Receiving a warning
2. Can not fly in
3. User can apply on the DJI official website
after manual approval
Ground
When taking off:
1. Receiving a warning
2. Can not take off
3. User can apply on the DJI official website after manual approval
118
© 2023 DJI All Rights Reserved.
Limit maximum speed
DJI Mavic 3 Pro User Manual
Authorization Zones
Appear blue in the DJI app. Users will be prompted with a warning, and flight is limited by
default. UA cannot fly or takeoff in these zones unless authorized. Authorization Zones may be
unlocked by authorized users using a DJI verified account.
20 m
Receiving a warning
100 m
Authorization Zones
Limit maximum speed
When approaching:
1. Receiving a warning
2. Can not fly in
3. User can quickly apply on the DJI App
with a phone number
Ground
Altitude Zones
Altitude zones are zones with a limited altitude and appear in gray on the map. When
approaching, users receive warnings in the DJI app.
20 m
Altitude Zone
Receiving a warning
100 m
Limited altitude
Limit maximum speed
10 m
Limit maximum speed
1. UA can take off and fly into these zones in
specific height with a warning message
2. User can apply for permission on the DJI
official website after manual approval
Ground
Enhanced Warning Zones
A warning message will prompt users when the drone reaches the edge of the zone.
Enhanced Warning
Zones
1. UA can take off and fly into these zones with a warning
message which needs user confirmation
Ground
© 2023 DJI All Rights Reserved.
119
DJI Mavic 3 Pro User Manual
Warning Zones
A warning message will prompt users when the drone reaches the edge of the zone.
Warning Zones
1. UA can take off and fly into these zones with a warning
message
Ground
• When the aircraft and DJI Fly app cannot obtain a GPS signal, the GEO awareness
function will be inoperative. Interference of the aircraft antenna or disabling the GPS
authorization in DJI Fly will cause the GPS signal fails to be obtained.
EASA Notice
Make sure to read the Drone Information Notices document included in the package before
use.
Visit the link below for more EASA notice information on traceability.
https://www.easa.europa.eu/en/document-library/general-publications/drones-informationnotices
Original Instructions
This manual is provided by SZ DJI Technology, Inc., and the content is subject to change.
Address: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan
District, Shenzhen, China, 518055.
120
© 2023 DJI All Rights Reserved.
DJI Mavic 3 Pro User Manual
FAR Remote ID Compliance Information
The aircraft complies with the requirements of 14 CFR Part 89:
•
The aircraft automatically broadcasts Remote ID messages from takeoff to shut down. An
external device such as a cell phone or tablet is required to be connected as a location
source to DJI mobile devices without an integrated GNSS system [1], and must run the DJI
flight control app such as DJI Fly in the foreground and always allow the DJI flight control app
to obtain its accurate location information. The connected external device must minimally be
one of the following:
1) FCC Certified personal wireless device that uses GPS with SBAS (WAAS) for location
services; or
2) FCC Certified personal wireless device with integrated GNSS.
Also, the external device must be operated in a way that does not interfere with the location
reported and its correlation to the operator location.
•
The aircraft automatically initiates a pre-flight self-test (PFST) of the Remote ID system
before takeoff and cannot take off if it does not pass the PFST [2]. The results of the PFST of
the Remote ID system can be viewed in either a DJI flight control app such as DJI Fly or DJI
goggles.
•
The aircraft monitors the Remote ID system functionality from pre-flight to shut down. If the
Remote ID system malfunctions or has a failure, an alarm will be displayed in either a DJI
flight control app such as DJI Fly or DJI goggles.
Footnotes
[1] DJI mobile devices without an integrated GNSS system such as DJI RC-N1, DJI FPV Goggles V2, and DJI
Goggles 2.
[2] The pass criterion for PFST is that the hardware and software of the Remote ID required-data source and
radio transmitter in the Remote ID system are functioning properly.
After-Sales Information
Visit https://www.dji.com/support to learn more about after-sales service policies, repair
services, and support.
© 2023 DJI All Rights Reserved.
121
WE ARE HERE FOR YOU
Contact
DJI SUPPORT
Trademark Recognition
The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface,
HDMI trade dress and the HDMI Logos are trademarks or registered trademarks
of HDMI Licensing Administrator, Inc. in the United States and other countries.
This content is subject to change.
https://www.dji.com/mavic-3-pro/downloads
If you have any questions about this document, please
contact DJI by sending a message to [email protected].
DJI and MAVIC are trademarks of DJI.
Copyright © 2023 DJI All Rights Reserved.