IN WIN 80 PLUS Bronze Power Supply User Manual

User Manual
Product Story
The P Series is an 80 PLUS® Gold
certified power supply that focuses
its features on efficiency, reliability
and overall PC building experience.
The P Series’ low noise output makes
this PSU the optimal choice for most
PC builds.
Features
1. 80 PLUS® Gold Certified for High
Efficiency
2. Ultra Quiet Zero RPM Fan Mode
3. 5V and 3.3V DC to DC Design
4. Highly Reliable Japanese
Aluminum Electrolytic Capacitors
5. Multi-Protection Safeguards (OCP,
OVP, UVP, SCP, OTP, OPP)
6. Fully Modular Cables for Quick and
Easy Installation
7. 5-Year Warranty
Specifications
Model
Model Number
Total Power
P65
P75
P85
IW-PS-P650W
IW-PS-P750W
IW-PS-P850W
650W
750W
850W
Material
SECC
Type
ATX12V V2.4 / EPS12V V2.92
Cable Management
Fully Modular
PFC
Active PFC (> 0.95)
Efficiency
80 PLUS®Gold (Up to 90%)
MTBF (Hours)
> 100,000 hrs.
AC Input
100-240Vac.,10A, 50-60Hz
Fan
135mm FDB Fan
Typical Load Fan Noise(dBA)
(50% Loading)
< 25dBA
Operating Temperature Range (°C)
0~40 °C
Full Protection
OCP/ OVP/ UVP/ SCP/ OTP/ OPP
Safety Certifications
cTUVus/ TUV/ CB/ BSMI/ CE/ FCC/ EAC/ CCC/ RCM
Dimensions (L x W x H)
160 x 150 x 86mm
Package Dimensions
(L x W x H)
210 x 325 x 100mm
Net Weight
2.35kg
2.46kg
2.64kg
Gross Weight
2.81kg
2.92kg
3.12kg
Warranty
Connector
Model
P65
P75
P85
5 Years
20+4 Pin Motherboard
1
1
1
8 (4+4) Pin CPU
1
2
2
8 (6+2) Pin PCI-E
4
4
6
4 Pin Peripheral
4
4
4
SATA (90 Degree)
9
12
12
Floppy
1
1
1
AC INPUT
DC OUTPUT
Max. Output Current
Max. Combined Power
Max. Output Current
Max. Combined Power
Max. Output Current
Max. Combined Power
+12V
54.2A
650W
62.5A
750W
70.9A
850W
* InWin products comply with RoHS regulations.
* Specifications may vary based on different regions.
100-240Vac.,10A, 50-60Hz
+5V
+3.3V
-12V
+5VSB
22A
22A
0.3A
3A
120W
3.6W
15W
22A
22A
0.3A
3A
120W
3.6W
15W
22A
22A
0.3A
3A
120W
3.6W
15W
Total Power
650W
750W
850W
Package Contents
P Series Power Supply Unit x1
(P65/ P75/ P85)
QR Code Card x1
Modular Cables Box x1
Modularized
Cables Box
X1
X1
P85 P75
20+4 Pin Motherboard
Connector
P65X1
8 (4+4) Pin CPU
Connector
P85X3
P75X2
P65X2
8 (6+2) Pin PCI-E
Connector
X1
4 Pin Peripheral
Connector
X3
X3
P85 P75
P65
SATA (90 Degree)
Connector
X1
Floppy Connector
X1
X8
X4
Power Cord
Cable Ties
Mounting Screws
Cable Information
20+4 Pin Motherboard
650mm
8 (4+4) Pin CPU P65
650mm
8 (4+4) Pin CPU P75/P85
650mm
100mm
8 (6+2) Pin PCI-E
600mm
100mm
SATA (90 Degree) P75/P85
100mm
100mm
100mm
100mm
100mm
550mm
SATA (90 Degree) P65
4 Pin Peripheral
550mm
550mm
100mm
Floppy
150mm
Installation
1.Make sure the power supply's AC
power cable is not connected
before installation.
2.Place the power supply unit into
the space provided in the case and
secure the power supply unit with
the screws.
3.Connect 24-pin power to the 24-pin
socket on the motherboard.
4.Connect the 8-pin +12V cable to
the motherboard.
A.If your motherboard has an
8-pin + 12V socket, connect
the 8-pin cable directly to your
motherboard.
B.If your motherboard has a 4-pin
socket, detach the 4-pin from the
8-pin cable, and plug the 4-pin
cable directly to your
motherboard.
Installation
5.Connect the peripheral cables, PCIExpress cables, and the SATA
cables to the appropriate socket.
6.Make sure all the cables are tightly
connected and save any unused
modular cables for future usage.
7.Connect the AC power cord to
the power supply and turn it on by
switching the power button to the
"I" position.
Precautionary Installation Guide
for High-Powered Graphics Cards
Some graphics cards on the market possess
two or three PCIe connectors, and the power
of these graphics cards usually exceed 225W
(150W PCIe 8-pin connector + 75W from
motherboard PCIe slot). The maximum
rated wattage of a single PCIe 8-pin power
cable and connector is 150W, therefore,
when installing a high-powered graphics
card, please make sure to use two or three
independent PCIe cables to connect to the
high-powered graphics cards.
Troubleshooting
These troubleshooting points will help
you diagnose and solve problems
with your power supply if the unit fails
to operate properly:
1.Please make sure the power supply
and power cord are connected
properly.
2.Please make sure the power cord is
plugged into the power socket.
3.Please make sure the power supply
I/O button is switched to the "I"
position.
4.Please check if all the connectors
(motherboard and peripheral) are
connected properly.
5.Please allow a 5-second interval
before turning the power on again
when power supply is switched off
manually.
6.If you are still experiencing
difficulties, please contact your
local distributor for RMA support.
Notices and
Warranty
■ Notices
1.Please use the anti-static precautions
while installing the components to
prevent damage and injury.
2.Install in accordance with the user
manual’s instructions and safety
warnings.
3.High voltages are present in the
power supply. Do not open the
power supply case. Any modifications
may damage the product and may
place the user at risk.
4.Do not use the power supply if it has
been wet or damaged to avoid
electric shock or injury.
5.Do not install the power supply near
any heat sources such as: radiators,
heat registers, or other apparatus
that produces heat.
Notices and
Warranty
6.Do not insert any objects into the
open ventilation or fan grill area.
supply.
7.Please use only this product's
exclusively supplied cables. Other
cables may not be compatible and
could cause serious damage to your
system and power supply.
8.Do not modify the cables and/or
connectors included with the power
supply.
Notices and
Warranty
■ Warranty
1.InWin provides a 5-year warranty
toward the product. The warranty
covers malfunctions or flaws before
customer use. The warranty starts
from your initial purchase
(according to the date on your
receipt). Please note that we do not
honor the warranty for the product
if it is not purchased personally
or if it is purchased through an
unauthorized distribution channel.
2.This limited warranty shall not apply
if the defect was caused through
any of the following:
1) Abuse and misuse,
2) Operation outside of product
specification,
3) Unauthorized service or
modification,
4) Any and all alteration of the
product.
Notices and
Warranty
■ Warranty
3.For more detailed warranty
information, please visit the InWin
retail website at www.in-win.com.
4.The actual product is subject to
change without prior notice. In Win
Development Inc. reserves the right
to make final modifications.
Copyright © 2019 In Win Development Inc. All Rights Reserved.