Konka KDG40MX558AN2 User Manual

LED TV
KDG40MX558AN2
OWNER'S MANUAL
Please read this manual carefully before TV operation.
Retain it for future reference.
Dolby, Dolby Audio and the double-D symbol are trademarks
of Dolby Laboratories.
Important Safety Instructions and Maintenance
Important Safety Instructions
High Voltage
Do not open
CAUTION
Risk of electronic shock, do not open.Do not
attempt to service this product yourself as
opening or removing covers may expose you
to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
If the following problems occur:
Turn off the TV set and unplug the AC power
cord immediately if any of the following
problems occur. Ask your dealer or service
centre to have it checked by qualified service
personnel.
When:
- AC power cord is damaged.
- Poor fitting of AC power outlet.
- TV set is damaged by being dropped, hit or
having something thrown at it.
- Any liquid or solid object falls through
openings in the cabinet.
To reduce the risk of fire or
electric shock, do not expose
this product to rain or moisture.
The apparatus shall not be
exposed to dripping or splashing and
no objects filled with liquids, such as vases,
shall be placed on the apparatus.
The screen and cabinet get warm when the
TV is in use. This is not a malfunction.In case
of smoke, strange noise or strange smell
from the unit:
· Turn off the power switch immediately;
· Disconnect the power plug from the power
outlet;
· Contact your dealer or service
centre. Never attempt to make
repairs yourself
because this could
be dangerous.
Never push objects of any kind into the set
through the cabinet slots as they may touch
dangerous voltage points or short-circuit
parts that could result in a fire or electric
shock. Never spill liquid of any kind on the
set. Use special caution in households where
children are present. The apparatus is not
suitable for children under 3-year to operate.
Do not overload wall outlets, extension cords or adaptors beyond their capacity,
this can result in fire or electrical shock.Power-supply cords should be
routed so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords at plug
end, adaptors and the point where they exit from the appliance. The mains
plug is used as the disconnect device. It shall remain readily accessible and
should not be obstructed during intended use. Make sure to plug the power
cord in until it is firmly inserted. When removing the power cord, make sure to hold the power
plug when pulling the plug from the outlet, do not pull the plug out by the wire. NEVER touch the
plug or power cord with wet hands. To disconnect the apparatus from the mains power, the plug
must be pulled out from the mains socket, therefore make sure the mains plug is always easily
accessible.
Do not push or scratch the front filter, or place any objects on top of the TV set. The image may
be uneven or the screen may be damaged.
To avoid the fire, no naked flame source, such as lighted candles, should be placed
on the apparatus.
1
Important Safety Instructions and Maintenance
Important Safety Instructions
An outside antenna
system should not
be located in the
vicinity of overhead
power lines or other
electric light or power
circuits, or where it can
fall into such power
lines or circuits. When installing an outside
antenna system, extreme care should be
taken to keep from touching such power
lines or circuits as contact with them might
be fatal.Ensuring the television is not
overhanging the edge of the supporting
furniture.
When not in use
If you will not be using the TV set for several
days, the TV set should be disconnected from
the AC mains for environmental and safety
reasons. As the TV set is not disconnected from
the AC power when the TV is turned off at the
standby switch, pull the plug from the AC power
outlet to disconnect the TV completely. However,
some TV sets may have features that require the
TV set to be left in standby to function correctly.
In the case of lightning, unplug the TV set from
the outlet immediately. Never touch the antenna
wire during lightning.
Excessive volume from earphones and
headphones can cause hearing loss.
Do not pull the plug out by the wire; Never
touch the plug with wet hands.
Installation
The ventilation should not be impeded by covering the ventilation
opening with items, such as newspapers, tablecloths, curtains, etc.
At least 10 cm space should be left around the apparatus for sufficient
ventilation.
The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat. Place the apparatus in
such a position that the screen
is not exposed to direct sunlight. It is best to have soft indirect
lighting while watching and avoid completely dark environments
and reflection from the screen as these may cause eye fatigue.
Keep the TV set away from any equipment emitting
electromagnetic radiation.
Do not place the set on an unstable cart, stand, table or shelf. The
set may fall, causing serious personal injury as well as damage to
the product. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus. An
appliance and cart combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the
appliance and cart combination to overturn.
Do not place this apparatus near water, for example, near a bath
tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or
a swimming pool; and the like;
2
Important Safety Instructions and Maintenance
Installation
When the TV being moved in from cold place, it needs some right time for dew
inside unit evaporating fully before turn on the unit;
Move
To prevent injury, this apparatus must be securely attached to the floor/wall in
accordance with the installation instructions.
LED Screen
Although the LED screen is made with high precision technology and 99.99% or more of the
pixels are effective, black dots may appear or bright points of light (red, blue or green) may
appear constantly on the LED screen. This is a structural property of the LED screen and is not
a malfunction.If the surface of the LED panel cracks, do not touch it until you have unplugged
the AC power cord. Otherwise electric shock may result. Do not throw anything at the TV set.
The LED panel may break from the impact and cause serious injury.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
Do not display still images and partially still images on the LED panel for more than 2 hours as it
can cause screen image retention. This image retention is also known as "screen burn". To
avoid such image retention, reduce the degree of brightness and contrast of the screen when
displaying a still image.
Watching the LED TV in 4:3 format for a long period of time may leave traces of borders
displayed on the left, right and centre of the screen caused by the difference of light emission on
the screen. Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may
produce partial after-images. To prevent this effect, reduce the 'brightness' and 'contrast' when
displaying still images.
Cleaning
Cleaning and handling the screen surface
and cabinet. Disconnect the unit from the AC
outlet before cleaning. To remove dust, wipe
gently with a soft, lint free cloth. If required
use a slightly damp cloth.
solvent thinner
MAINS PLUG
Wipe the mains plug with a dry cloth at
regular intervals. Moisture and dust may lead
to fire or electrical shock.
Use care not to subject the TV's surfaces to detergent. (A liquid inside
the TV could lead to product failure, fire or electrical shock.)
Use care not to subject surfaces to bug repellent, solvent, thinner, or
other volatile substances as this may deteriorate the surface and finish
of the cabinet.
3
Important Information
If a television is not positioned in a sufficiently stable location, it can be potentially hazardous
due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions
such as:
• Using cabinets or stands recommended by the manufacturer os the television.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge os the supporting furniture.
• Not placing the television on tall furniture (for example, cupboards or bookcases) without
anchoring both the furniture and the television to a suitable support.
• Not standing the televisions on cloth or other materials placed between the television and
supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television or its
controls.
• Keep small accessories out of reach of children so they are not mistakenly swallowed.
Table of Contents
Accessories......................................................................................................................5
Introduction
Features.............................................................................................................................6
Basic Functions..................................................................................................................6
Specifications.....................................................................................................................7
Stand and wall-mounting instructions (optional)......................................................... 8
General Description
Overview of back panel..................................................................................................... 9
Overview of front panel..................................................................................................... 10
Overview of remote control............................................................................................... 11
Installing Batteries in the Remote Control........................................................................ 14
External Connection
Antenna connection.......................................................................................................... 14
Connecting VCR............................................................................................................... 15
Connecting a Camcorder.................................................................................................. 16
Connecting DVD Player/Set-Top Box via HDMI.............................................................. 17
Connecting Digital Audio System...................................................................................... 18
Connecting PC................................................................................................................. 19
Supporting signals.......................................................................................................... 19
Basic Operations
Menu Operation................................................................................................................ 20
Menu system instruction
Picture............................................................................................................................... 22
Sound................................................................................................................................ 23
Function............................................................................................................................. 24
Time .................................................................................................................................. 28
Option................................................................................................................................ 29
Lock................................................................................................................................... 30
Channel............................................................................................................................. 31
Network Setting................................................................................................................33
Internet..............................................................................................................................36
Digital Media Player
Introduction........................................................................................................................ 40
Troubleshooting............................................................................................................... 41
4
Accessories
Please make sure the following items are included with your LED TV. If any items are missing,
contact your dealer.
I NPUT
1
2
4
5
7
8
3
9
I NFO
0
RECALL
S UBTITL E
HO ME
6
Q.MEN U
ME NU
ENTER
/LIST
BA CK /
GU ID E
E XI T
VOL
CH
INDEX
HOLD
TEX T
SI ZE
TIM E
REVE AL
CANCEL
SUB CODE
MI X
Pg Dn
Owner’s
Instructions
Remote Control
Mini YPbPr Cable
5
Introduction
Features
 TV adopts 40" TFT LED display screen
 Zero X radiation complies to green environment protection requirement
 Connect to computer directly to realize TV/monitor combo.
 USB 2.0
 16:9 wide screen
 Auto tuning and fine tuning
 HDMI input
 Component Compatible (480i; 480P; 576i; 576P; 720P; 1080i; 1080P)
 Programmable sleep timer
 Wide range voltage input
 No-signal automatic power off
Basic Functions
Input terminals used for external equipment connection
1 x RF input
1 x Computer PC-RGB input
2 x USB inputs
3 x HDMI inputs
1 x COMPONENT input
1 x AV input
1 x OPTICAL output
1 x Headphone output
1 x DVB-S2 input
1 x RJ-45 NET
1 x CI input
6
Introduction
Specifications
Model
KDG40MX558AN2
Display size
40" Diagonal (max.)
LED panel resolution
1920X1080
Speaker output power
≥ 5W X2
Power supply
110-240V~, 50/60Hz
TV receive system
Digital: DVB-T/T2, DVB-C, DVB-S/S2
Analog: PAL: BG, I, DK,
SECAM: BG, D/K
Frequency range
Analog: Antenna: 46.25MHz-855.25MHz
Digital:
DVB-T/T2: 5-12,21-69
DVB-C: 113MHz~898MHz
DVB-S/S2: 950MHz-2150MHz
Video in
PAL/NTSC/SECAM
Power consumption
75W
Standby comsumption
≤ 1W
Antenna input
75 ohms, unbalanced
Controller power
DC 3V
(Two AAA size batteries)
Dimensions TV with stand
(LxWxH)
TV without stand
TV with stand
899×555×234mm
899×512×84mm
Weight
(Net weight) TV without stand
6.3Kg
Work temperature
0 o C-40 o C
6.0Kg
NOTES:
• Design and specifications are subject to change without notice.
• Weight and Dimension shown are approximate.
7
Stand and wall-mounting instructions (optional)
How to assemble the stand
If you need to remove or assemble the stand please read the following instructions.
-Before attaching/detaching the stand, make sure to turn off the TV.
-Before performing work, spread cushioning over the base area to lay the LED TV on.
This will prevent it from being damaged.
Assembling instruction:
Step1: Take out two stands from package,
and insert them into bottom of TV;
Step2: Take out four screws provided with
TV set and tighten them into screw
holes;
- To disconnect the stand from the TV, perform the above steps in reverse order.
Note: The product and illustrations in this user's manual is only for explanation purposes and may
vary depending on model.
8
General Description
Overview of back panel
You can connect the TV with video devices such as DVD/VCD player, VCR and video camera to enjoy the high
quality picture.
USB
USB
5V
500mA
CI
Headphone
CI card
AUDIO
OPTICAL
HDMI 2
(ARC)
HDMI 1
VGA
R
COMPONENT/AV IN
L
Pr
Pb
Y/V
DVD player
PC
HDMI 3
DVB-S2
DVD player
Camcorder
Blu-ray disc player
RF
PC (HDMI-output)
Note: The product and illustrations in this user's manual is only for explanation purposes and may
vary depending on model.
9
General Description
Overview of front panel
Five key button function description
Display \ hidden button menu: when no button menu pops up, press the button and the button menu pops up,
as shown in the figure below. The button menu will close automatically after the button is pressed for 5 seconds.
Key function selection: press the button short, the focus moves to the right, and select the corresponding function,
such as pressing the button short 3 times, the focus position is as shown in the picture below in red. At this point,
continue to press the short button and focus back to the position shown above.
Key function execution: long press button can perform the function corresponding to the focus, such as
the focus in the position shown in the figure above, the channel reduction function will be performed.
Icon function description:
Shutdown function, corresponding to the menu "power" button.
Open the menu, corresponding to the remote "menu" button.
Open the signal source menu, corresponding to the remote control "signal source" button.
Increase the volume, corresponding to the ordinary seven button button "volume +" button.
Reduce the volume and press the "volume -" button on the keypad with the normal five keys.
Backward switching channels, corresponding on the five key for keypad channel "∧" button.
Forward channel switch, corresponding on the five key for keypad ∨ "channel" button.
The OK button is a confirmation function
Note: The product and illustrations in this user's manual is only for explanation purposes and may
vary depending on model.
10
General Description
Overview of Remote Control





INPUT
1
2
3
4
5
6
7
8
9
INFO
0
RECALL
SUBTITLE
HOME
Q.MENU
MENU





ENTER
/LIST
BA CK/
GUID E
EXIT
VOL
CH
INDEX
HOLD
MIX
TEXT
SIZE
TIME
REVEAL
CANCEL
SUBCODE
Pg Dn
Loading batteries:
1) Remove the lid of the battery compartment.
2) Insert 2 size AAA batteries with polarities as indicated inside the compartment.
3) Replace the lid.
Note:
1) A loading of batteries should be last one year under normal use.
2) If you don't intend to use the remote control for a long period of time, remove batteries
to avoid damage due to leakage.
3) Do not mix old and new batteries or different types.
4) Do not throw batteries into fire or water.
5) The batteries (battery pack or batteries installed) should not be exposed to excessive
heat such as sunshine, fire or the like.
11
General Description
Overview of Remote Control
1. POWER: Turn the TV on and off.
2. INPUT: This button is used to switch among different
sources, Select a source and press ENTER button to
confirm.

3. Digital Buttons(0-9): Directly select channel with digital
buttons.

4. RECALL: Switch to the previous program.



5. YouTube: If network connects, press this key to view
YouTube directly.
INPUT
1
2
3
4
5
6
7
8
9
INFO
0
RECALL
SUBTITLE
HOME
Q.MENU
MENU
6. INFO: Display the program information.
7. SUBTITLE: In DTV source, the button is used for subtitle
language.
In USB source, the button is used to change subtitle.
ENTER
/LIST
BACK /
GUIDE
EXIT
8. HOME: Press it to go to App home page.
9. NETFLIX: If network connects, press this key to view
NETFLIX directly.
VOL
CH
10. MENU: Display the main menu or exit the current menu.
11. Q.MENU: Press this key to go to quick menu.
12. ENTER/LIST: Press to show channel list and favorite list
on screen.
13. Arrow buttons : Use to select on-screen menu
items and change menu values.
14. BACK/GUIDE: Display menu GUIDE in DTV mode.
Return function in app.
15. EXIT: Exit the menu.
16. COLOR BUTTONS: It's used as it's show the EPG
or Program Edit menu.
17. MUTE: Press this button to cut off the sound of the TV
set temporarily, press again to resume.
18.
button/AUDIO LANG : In ATV source, the button is
used to set NICAM sound system. In DTV source, the
button is used to set the audio language.
19. VOL+/-: Press these buttons to adjust the volume.
20. CH˄/˅: Press these buttons to change channel
upward or downward.
12
INDEX
HOLD
MIX
TEXT
SIZE
TIME
REVEAL
CANCEL
SUBCODE
Pg Dn





General Description
Overview of Remote Control
21. DIGITAL MEDIA PLAYER CONTROL BUTTON:
Include play/pause, stop, previous, next, backward,
forward is used in USB mode .
Please refer to relevnat instructions in the section of
multimed player.
22.INDEX: Press INDEX button, then index page displays.
23.MIX (
): Teletext buttons for mix function, please refer
to TTX description page. It is also used for recording
function when TV is on DTV mode, please refer to PVR
page.
24. HOLD:Press HOLD button to toggle Hold function on
or off. When Hold is switched on, the page acquisition
is stopped. When Hold is switched off, the page
acquisition is started.





INPUT
1
2
3
4
5
6
7
8
9
INFO
0
RECALL
SUBTITLE
HOME
Q.MENU
MENU
ENTER
/LIST
25. TEXT: Press TEXT button to enter or exit teletext mode.
BACK /
GUIDE
26. SIZE: Press SIZE button one time to display the upper
half of the screen in double height, press the SIZE button
two times to display the lower half of the screen in double
height, press three times to display the full screen in
normal size.
27. REVEAL: Pressing this button will reveal any hidden
data (answers to quizzes for example). Press the
REVEAL button again to return to normal screen.
EXIT
VOL
CH
INDEX
HOLD
MIX
TEXT
SIZE
TIME
REVEAL
CANCEL
SUBCODE
Pg Dn
28. TIME: This button is used to show the time of the teletext.
29. SUBCODE: Subcode mode gives the possibility to select
certain subcode pages of a Teletext page. Entry of digits
within the range 0...9 for current subcode entry. If the
digit completes the entry, a page request is started.
Press CH ˄ and CH ˅ buttons to change the
subcode pages.
30. CANCEL: The CANCEL button will exit from any Teletext
on the display. Press CANCEL button again to exit Teletext
and return to live TV broadcast.
13





General Description
Installing Batteries in the Remote Control
Installing Batteries
1
Open the battery compartment
cover on the back side.
Insert two 1.5V AAA size batteries
2 in correct polarity. Don´t mix old or
INPUT
used batteries with new ones.
1
2
3
Point the remote towards the remote control
sensor of the TV and use it within 8 meters.
Put the used batteries into the recycling bin
since they can negatively affect the
environment.
3 Closed the cover.
NOTES:
• One loading of batteries will last for 1 year under normal use.
• If you do not intend to use the remote controller for a long period of time, remove them
to avoid damage due to leskage.
• Do not use old and new batteries together.
• The batteries (battery pack or batteries installed) shall not exposed to excessive heat
such as sunshine, fire or the like.
External Connection
Antenna connection
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be
connected to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder cable,
you need to use the 300ohm/75ohm converter to connect the antenna cable to the antenna jack.
For details Please refer to the following drawing.
Antennas with 300  flat twins Leads
Antennas with 75  Round Leads
Use a 75ohm - 300ohm converter
75ohm coaxial cable
300ohm coaxial cable
Antenna cable
Antenna feeder
14
External Connection
Connecting VCR
These instructions assume that you have already connected your TV to an antenna or a cable TV
system. Skip step 1 if you have not yet connected to an antenna or a cable system.
VCR Rear Panel
ANT ANT OUT S-VIDEO
AUDIO OUT
VIDEO OUT
TV Rear Panel
1
3
2
3
HDMI 1
1
2
3
RF Cable (Not supplied)
YPbPr cable(Not supplied)
Audio Cable (Not supplied)
1
15
VGA
2
External Connection
Connecting a Camcorder
The rear panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you
to view the camcorder tapes without using a VCR.
Each Camcorder has a different back panel configuration.
When connecting a Camcorder or DVD, match the color of the connection terminal to the cable.
2 Audio Cable (Not supplied)
White
Red
1 Video Cable (Not supplied)
Video
Green
Camcorder
2
1
COMPONENT/AV IN
AUDIO
OPTICAL
HDMI 2
(ARC)
HDMI 1
VGA
R
L
Pr
Pb
Y/V
1. Connect a Video Cable between the AV VIDEO in jacks on the TV and the VIDEO OUT jack on
the camcorder.
2. Connect Audio Cables between the AUDIO L and AUDIO R jacks on the TV and the AUDIO OUT
jacks on the camcorder.
3. Connect a Video Cable between the AV VIDEO IN jacks on the TV and the VIDEO OUT jack on
the DVD.
4. Connect Audio Cables between the component IN AUDIO L and R jacks on the TV and the
AUDIO OUT jack on the DVD.
Notes:
1. Whenever you connect an external device to your TV, make sure that power on the unit
is turned off.
2. When connecting an external device, match the color of the connection terminal to the cable.
16
External Connection
Connecting DVD Player/Set-Top Box via HDMI
This connection can only be made if there is a HDMI Output connector on the external device.
AUDIO
HDMI 2
(ARC)
OPTICAL
HDMI 1
VGA
R
COMPONENT/AV IN
L
Pr
Pb
Y/V
HDMI Cable (Not supplied)
What is HDMI?
HDMI, or high-definition multimedia interface, is a next-generation interface that enables the
transmission of digital audio and video signals using a single cable without compression.
Multimedia interface is a more accurate name for it especially because it allows multiple channels
of digital audio (5.1 channels).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP
(High Bandwidth Digital Copy Protection) coding feature installed, and supports multi-channel digital
audio.
Each DVD player/STB has a different back panel configuration.
Connect an HDMI Cable between the HDMI1, HDMI2, HDMI3 connector on the TV and the HDMI
connector on the DVD player/Set-Top Box.
Notes:
1.Whenever you connect an external device to your TV, make sure that power on the unit
is turned off.
2.When connecting an external device, match the color of the connection terminal to the
cable.
17
External Connection
Connecting Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
TV Rear Panel
Digital Audio System
(Black)
OPTICAL
COMPONENT/AV IN
AUDIO
OPTICAL
HDMI 2
(ARC)
HDMI 1
VGA
R
L
Pr
Pb
Y/V
5.1 CH audio is possible when the TV is connected to an external device supporting 5.1 CH.
Connect an OPTICAL Cable between the OPTICAL jacks on the TV and the Digital Audio Input jacks
on the Digital Audio System. When a Digital Audio System is connected to the OPTICAL terminal:
Decrease the gain (volume) of the TV, and adjust the volume level with the Digital Audio System's
volume control.
18
External Connection
Connecting PC
2 PC Audio Cable (Not supplied)
1 D-Sub Cable (Not supplied)
PC
1
2
COMPONENT/AV IN
AUDIO
HDMI 2
(ARC)
OPTICAL
HDMI 1
VGA
R
L
Pr
Pb
Y/V
Each PC has a different back panel configuration.
Connect a PC Audio Cable between PC AUDIO IN jack on the TV and the Audio Out jack of the
soundcard on your computer.
You should set PC software before you connect a PC to your TV (please refer to "PC Display''
settings)
Notes:
1. Whenever you connect an external device to your TV, make sure that power on the unit
is turned off.
2. When connecting an external device, match the color of the connection terminal to the
cable.
Supporing Signals
Input
Mode
Digital
Digital: DVB-T/T2, DVB-C, DVB-S/S2
Analog
PAL BG I DK, SECAM BG DK
CVBS
PAL / NTSC / SECAM
Input
PC/VGA
Resolution
VGA
SVGA
XGA
640x480
800X600
1024X768
1280X1024
SXGA
1360X768
1920X1080
Input
Component
Vertical
Frequency
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
HDMI
19
Resolution
480i
480p
576i
576p
720p
1080i
1080p
480p
576p
720p
1080i
1080p
Vertical
Frequency
60Hz
60Hz
50Hz
50Hz
50Hz/60Hz
50Hz/60Hz
50Hz/60Hz
60Hz
50Hz
50Hz/60Hz
50Hz/60Hz
50Hz/60Hz
Basic Operation
Menu Operation
1 Input Setup
Press INPUT key on the remote control to enter "INPUT SOURCE" menu.
Use /key to select a input source and press ENTER key to confirm.
Input Source
DVBT
DVBC
DVBS
ATV
AV
Component
HDMI 1
HDMI 2
HDMI 3
USB
Input Source
Component
VGA
2 Channels Selection
There are four ways to select channel:
1) Using number keys, and “ENTER” keys on the remote control to select channel directly.
To select channel 90, press 9
0
.
When you use the number buttons, you can directly select channels that were either erased or
not memorized.
2) Using CH ˄ / ˅ key on the remote control or on your TV to select channel.
When you press the CH ˄ / ˅ key, the TV changes channels in sequence. You will see all the
channels that the TV has memorized.
You will not see channels that were either erased or not memorized.
3) Press RECALL key to return to previous channel, press it again to return to current channel.
To quickly switch between two channels that are far apart, tune to one channel, then use the
number keys to select the second channel. Then use the RECALL button to quickly alternate
between them.
RECALL is not activated if no channel has been changed after TV turning on.
4) Select channels from "Channels List" or "Favorite List".
Press “ENTER” key to choose from "Channel List" menu.
ENTE R
3 Volume Adjustment and Mute Setup
Volume adjustment
Press VOL+ / - key on the remote control or the TV to display "Volume" menu, adjust the volume
of TV between 0 to 100 by using VOL+ / -key:
20
Basic Operation
Menu Operation
 To increase the volume, press VOL + key;
Mute
 To decrease the volume, press VOL - key;
Mute
Press “ MUTE” and the sound cuts off. The MUTE icon will appear in the lower-left corner of the
screen.
To resume sound, press the “MUTE” button again, or simply press the VOL+ key.
4 Current Channel Information
Press “INFO” key on the remote control to view current channel information, the indications of channel
information are listed in the following table.
00:00 01/01/1970
Press “EXIT” key on the remote control to exit this OSD.
5 EPG Menu
Press BACK/GUIDE key to enter "EPG" menu, the first line displays current channel number, channel
name, event title and current time.
The following line displays all programs which will be displayed in this channel, press ▲ / key to select
the program you desired, then press “ENTER” key to enter this program to watch.
Reminder use “Reminder”(ENTER) button to reserve programs. If the TV is in DTV mode, it will
automatically turn to the reserved program at the scheduled time. Use “Schedule” (BLUE) button to
look up the reminder list.
Press EXIT key on the remote control to exit this OSD.
21
Menu system instruction
Picture
1. Press MENU key to display the main menu on the screen.
2. Press / key to select "Picture" option.
3. Press  key to enter "Picture" submenu.
Picture
Sound
Picture Mode
Your TV has four picture settings (Sports, Normal, Mild, User)
that are preset at the factory. Only "User" mode can be set to your
preference by adjusting particular items such as Contrast, Brightness,
Color, Sharpness.
1. Press / key to select "Picture Mode" option.
2. Press / key to select one picture mode.
User settings for PICTURE
(Contrast, Brightness, Color, Sharpness, Tint)
Your set has several settings which allow you to control picture quality.
1. Press ▲/▼ key to select a particular item.
2. Press / key to decrease or increase the value of a particular
item.
Note: The adjusted values are stored according to the selected
particular item.
Contrast: Adjusts the lightness and darkness between objects and the background.
Brightness: Adjusts the brightness of the picture.
Color: Adjusts the colors, making them lighter or darker.
Sharpness: Adjusts the outline of objects to either sharpen them or make them
more dull.
Tint: Adjusts the Tint of the picture.
Function
Time
Option
Lock
Channel
Picture Mode
Comtrast
70
Brightness
50
Color
70
Sharpness
20
Tint
0
Backlight
100
Color Temperature
Backlight
You can Change the brightness of the entire screen according to your preference.
1. Press / key to select "Backlight" option.
2. Press/ key to increace or decreace the backlight value.
Backlight: Adjusts the brightness of the whole screen.
Color Temperature
You can change the color of the entire screen according to your preference.
1. Press / key to select "Color Temperature" option.
2. Press / key to select one color temp.
Cool: Makes whites bluish.
Standard: Makes whites nature
Warm: Makes whites reddish.
22
Menu
Menusystem
systeminstruction
instruction
Sound
1. Press MENU key to display the main menu on the screen.
2. Press / key to select "Sound" option.
3. Press  key to enter "Sound" submenu.
Sound Mode
Sound Mode
Equalizer
You can select the type of the special sound effect to
be used when watching a given broadcast.
Your TV has five sound settings (“Standard”, “Music”,
“Movie”, “Sports”, “User”) that are preset at the factory.
1. Press / key to select "Sound Mode" option.
2. Press / key to select one sound mode.
Balance
DAP
HDMI-ARC
0
Audio Type
AVL
Surround Sound
AD Swich
Digital Audio Output
Audio Language
 Standard: Selects the normal sound mode.
 Music: Provides clear and live sound for music.
 Movie: Provides live and full sound for movies.
 Sports: Emphasizes bass over other sounds.
 User: Selects your custom sound settings.
Equalizer
Set sound equalizer mode.
Balance
If the volumes of the left speaker and the right speaker are not the same, you can adjust the
"Balance" to suit your personal preference.
1. Press / key to select "Balance" option.
2. Press / key to decrease or increase the value of the item.
AVL
Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume
every time the channel is changed. “AVL” automatically adjusts the volume of the desired channel
by lowering the sound output when the modulation signal is high or by raising the sound output
when the modulation signal is low.
1. Press / key to select “AVL” option.
2. Press / key to select “On” or “Off”.
Surround sound
This is used to turn on surround sound to gain better sound effect.
1. Press / key to select "Surround sound” option.
2. Press / key to select “Surround” or “Off”.
AD Switch
Press / button to select AD Switch, then press Enter or  button to enter sub-menu.
In it you can turn the AD Switch on or off and set the volume ratio in DTV mode.
Digital Audio Output
This is used to set digital audio output.
1. Press / key to select "Digital Audio Output” option.
2. Press / key to select “Auto” or “PCM” in DTV or HDMI mode. .
Audio Language
You can set the first and secondary language for audio in DTV mode.
23
Menu
Menusystem
systeminstruction
instruction
Sound
HDMI ARC
DAP
Turn on or turn off the HDMI ARC function.
DAP
This is used to set DAP.
1. Press / key to select "DAP” option.
2. Press  key to enter “DAP” submenu.
DAP Enable
On
DAP Mode
User
Surround Virtualizer
Off
Dialog Enhancer
Off
Auto Volume Control
Off
Audio Type
This used to set audio type
1.Press / key to select "Audio Type" option.
2.Press  key to select audio type.
Function
1. Press MENU key to display the main menu on the screen.
2. Press / key to select “Function” option.
3. Press  key to enter “Function” submenu.
Noise Reduction
MPEG Noise Reduction
Noise Reduction
Aspect Ratio
Press / key to select the Noise Reduction mode.
You can select the right mode to match the pictures.
PVR File Sytem
Link Setup
MPEG Noise Reduction
Netflix Deactive
Press  / key to select the mode: off / low / middle / high.
The picture will be better when it is in “high” mode.
Netflix ESN
Netflix Version
Aspect Ratio
1. Press / key to select “Aspect Ratio” option.
2. Press / key to change the size of the picture on the screen.
PVR File System
1. Press / key to select “PVR File System” option.
2. Press ENTER or  key to enter submenu in DTV mode.
Connect the USB disk to the standard USB port before use PVR.
Select Disk: Press “ENTER” button to enter submenu and press “/” to choose the disk for PVR.
PVR File System
Select Disk
Select Disk
DISK 1
Time Shift Size
Format
Speed Check
24
Menu system instruction
Function
PVR File System: Press “ENTER” button to check if the disk is adapt to PVR.
USB: Display if the USB Disk is adapt to PVR.
Format Start: Press “ENTER” button to enter format submenu.
Time Shift Size
Size 512MB
Speed Check: Display the disk writing/reading speed.
Time Shift Size: Display the buffer used for PVR.
It’s suggested use the disk that speed is up than 4500KB/S.
Warning:
1. The disk must be formatted when first used for PVR, so backup the original data in the disk.
It`s suggested use a special disk for PVR. Don’t modify the PVR file in PC.
2. All the time is not precise, just for reference.
PVR Menu
When the DTV channel has signal, press “●”key to go to
the PVR main menu.
PVR Options
Start Record
Recorded Files
Schedule Recording
1.Press ▲/▼key to select “Start Record”. If the storage
device is ready, press “ENTER” key to start record.
CH 9 Nine Digital
Are you sure you want to Stop PVR?
00:04
0:00:45
Yes
No
The recording menus will disappear in 5 seconds, press “EXIT” key to recall them out.
When recording, press “●” key again, then you can choose to stop recording or continue:
2.Press ▲/▼key to select "Recorded Files". If the storage device is ready, press “ENTER” key to
check the record list.
1) Press / key to select record file.
2) Press “ENTER” or
key to play the selected record file.
3) Press "Red" key to delete the selected file.
4) When recorded files are playing, press
button to to fast backward or forward.
25
Menu system instruction
Function
Total:3GB
Recorded Files
Program Title
HD 0h 31m
SD 1h 45m
Size
5.1_Globo_HD_201091_215035.st
01/09/2010
Globo HD
Date
00:00
Delete
MENU
Exit
3. Press ▲/▼key to select "Schedule Recording".
In the Schedule Recording menu, you can see the record task list menu.
Press “ ENTER ” key to select one task.
1) Press "Red" key to delete the task.
2) Press "Yellow" key to Edit the task.
3) Press "Blue"key to add a new task directly.
Schedule Recording
Sun
Mon
Tue
Total:3GB
21:00
Wed
Thurs
22
23
24
25
26
27
Fir
28
29
30
31
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
HD 0h 31m
SD 1h 45m
Date
Wed, 1 Sep. 2010
MENU
Delete
Edit
New
Return
When the Scheduled record, TV remains silent and black screen, then press the power button to
turn on the TV.
Note: The recording time can not overlap, otherwise the previous record programs will be overwritten.
4. In DTV channel, press “
” key to pause, press it again to resume playback.
This is the “Time Shift”. During the suspension the image are temporarily stored in the disk, so
programs will not miss the suspension period, the length of time may be suspended by the size
of the disk buffer space constraints.
CH 9 Nine Digital
This feature supports fast forward and rewind function. Press “
ward.
26
” key to go backward or for
Menu system instruction
Function
5. In EPG menu, press "Red" key to go to manual record mode. Press Left/Right key to choose the
manual record mode, press ▲/▼key to select the Start/End time of the manual record.
Channel List
Program List
5.1 Globo HD
Add Record
5.1
Minute
Hour
Month
Date
Globo HD
2
0
Jan.
1
End Time
Minute
Hour
Month
Date
10
19
Aug.
9
Mode
Once
BACK BACK
ENTER OK
01:05-02:10 Program do jo
INFO
Info
Record
Schedule
ENTER Reminder
Link Setup
Link Setup
1. Press / key to select “Link Setup” option.
2. Press “ENTER” or key to enter “Link Setup” submenu.
Enable Link: Press / to turn on/off the link setup.
Auto Power On: When this option is “On” and the TV is in
standby mode. To turn on the DVD can also turn the TV at
the same time.
Auto Standby: When this Option is “On” and the TV is on,
to turn off TV can also turn the DVD into standby mode.
Netflix Deactive
1. Press “/" key to select “Netflix Deactive" option.
2. Press “” or “ ENTER " key to confirm.
3. Press "Yes" to confirm again, the Netflix will be activated.
Netflix ESN
Display the Netflix Esn information.
Netflix Version
Display the Netflix version.
27
Enable link
On
Auto Power On
Off
Auto Standby
Off
MENU
Return
Menu system instruction
Time
1. Press MENU key to display the main menu on the screen.
2. Press / key to select "Time" option.
3. Press  key to enter "Time" submenu.
Off Time
On Time
Off Time
In "Off Time” item, press  button or ENTER button to enter the submenu,
set the day & time to turn off the TV set.
Sleep Timer
Auto Sleep
Auto Sync
On Time
In "On Time” item, press  button or ENTER button to enter the submenu,
set the time to turn on the TV set, when the TV set is in the standby
mode. You can also choose which day to control you TV set in a week.
Clock --:-Time Zone
Sleep Timer
1. Press / key to select "Sleep Timer" option.
2. Press / key repeatedly until the desired time appears (Off, 10mins, 20mins, 30mins, 60mins,
90mins, 120mins, 180mins, 240mins).
Notes: The sleep timer you have set will be cancelled when the TV turns off or if a power failure
occurs.
Notes: When the time is less than 60 seconds, remind information will be displayed on the screen.
Press any key button to cancel timer function.
Auto Sleep
Press / key to select whether to open the No signal Power off features. If this function is opened,
the TV will power off when there is no signal.
Auto Sync
You can modify the time of your TV set in Manual mode. In Auto mode, the “clock” is decided by the
DTV signal.
Clock --:-When Auto Sync is on, the clock is got from DTV streams; Set the clock when Auto Sync is off.
Time Zone
You can choose it to modify your time zone in the TV set.
1. Press / key to select "Time Zone" option.
2. Press / key to select time zone.
28
Menu system instruction
Option
1. Press MENU key to display the main menu on the
screen.
2. Press / key to select "Option" option.
3. Press  key to enter “Option" submenu.
OSD Language
OSD Language
Network Update information
View End- User License
OSD Time
Subtitle
PC Adjust
1. Press / key to select “OSD Language" option.
2. Press ENTER or  key to select a proper language
for OSD
HBBTV
Reset
Network Configuration
Software Upadate
OSD Time
Set the preferred amount of time for the OSD to be
displayed on the screen.
Internet Update Check
Info
PC Adjust
This option is only used in VGA.
1. Press ▲/▼ key to select “PC Adjust” option.
2. Press ENTER key to enter the“PC Adjust”submenu.
Reset
1.Press “/" key to select "Reset" option.
2.Press “" or “ENTER" key to confirm.
3.Press "Yes" to confirm again, TV will turn off auto maticly and change all setting to factory setting.
Network configuration
Please refer to "Network setting"behind.
Software Update
When the TV need to be updated, please copy the new software to a USB storage and inset the
USB storage to TV, then operating by following steps.
1.Press “/" key to select "Software Update" option.
2.Press “” or “ENTER" key to confirm.
3.Press "Yes" to confirm again, the TV will update by USB, Please wait a few minutes and don't
turn off the power, it will turn off auto maticly when updating is finish.
Internet Update Check
This can update TV through internet.
Info
Display the software information and lan mac address.
Network Update information
1.Press / key to select "Network Update information".
2.Press  key to confirm
3.Press "YES" to confirm again, the tv will start to update by network,
please wait a few minutes and don't turn off the power, it will turn off
automaticly when updating finish.
Subtitle
Subtitle
Off
Primary
ENGLISH
Secondary
ENGLISH
Hearing Impaired
Subtitle
This used to set Subtitle
Turn on or turn off the subtitle function.
Off
MENU
29
Return
Menu system instruction
Option
HBBTV
This used to set HBBTV
Turn on or turn off the HBBTV function.
View End-User License
1. Press / key to select "View End-User License" option.
2. Press ENTER or  key enter view end-user license.
Lock
The "Lock" feature automatically locks out programming that is deemed inappropriate for children.
The user must first enter a Password before any of the lock restrictions can be set up or changed.
1. Press / key to select "Lock" option.
2. Press ENTER or  key to enter "Lock" submenu, "Enter Password" menu will appear, enter your
4-digit password to enter "Lock” submenu (the default password is 0000 and universal password
is 1980).
Lock System
Set the Lock function on or off.
1. Press / key to select "Lock System" option.
2. Press / key to select "On" or "Off".
Please Enter Password
Set Password
Lock System
1. Press / key to select "Set Password" option.
2. Enter your 4-digit password to enter "Set Password" submenu.
Choose any 4-digits for your new password and enter them. As soon
as the 4 digits are entered, the cursor skipped to “Confirm Password”
item, re-enter the same 4 digits, and your new password has been
memorized.
When the programs is locked, you can also press the menu key, Info
key and so on.
Parental Guidance
This option only used in DTV mode.
1. Press / key to select “Parental Guidance" option.
2.Prsee / key to select the lock level of the Parental Rate.
CI CAM Pin Code
Set CI CAM Pin Code function.
30
Set Password
Parental Guidance
CI CAM Pin Code
Menu system instruction
Channel
Before your television can begin memorizing the available channels,
you must specify the type of signal source that is connected to the
TV (i.e. an antenna or a cable system).
1. Press MENU key to display the main menu on the screen.
2. Press / key to select "Channel" option.
3. Press ENTER or  key to enter "Channel" submenu.
Auto Search
Program Edit
DTV Manual Search
ATV Manual Search
Auto Search
Signal Information
1. Press / key to select "Auto Search" option.
CI Information
2. Press  or ENTER key to confirm. then a notice window will be
Sofeware Update (OAD)
displayed on the screen.
Select "Start" to start search or "Cancel" to cancel it.
OAD SCAN
When searching, press EXIT key to exit tuning at any moment. Press
MENU key to skip DTV tuning when searching DTV, skip ATV tuning
when searching ATV.
3. After all the available channels are stored, the searching menu will exit.
Auto Search
In DVBS mode, you can set DVB-S option, set the satellite scan mode
Satellite
OPTUS_D1
and tune option.
Transponder
12456 H 22500
Program Edit
Scan Mode
Free
After the program is searched, select “Program Edit” in the “Channel”
menu, press “ENTER” button, program can be edited such as delete or
skip according to the user's habit.
Service Type
DTV+Radio
Network Search
Search Mode
Delete (Red) Button
This function can help delete program.
1. Select the program to be deleted in the "Program Edit".
2. Press "Delete"(Red) button, the program will be deleted.
Block (green) Button
This function can help Lock on unlock the program.
1. Select the program to be Locked in the “Program Edit”.
2. Press "Block"(Green) button, and input the right password, the lock mark is
displayed at the left side of the program.
3. Press “Block ”(green) button again , the program will be unlocked.
Skip (Blue) Button
This function can help shield certain program. Program skips when selecting
program by the “/” button on the TV or remote control.
1. Select the program to be shielded in the“Program Edit”.
2. Press “Skip” (Blue) button, the skip mark is displayed at the left side of the
program and this program is shielded.
3. To cancel the Skip function, enter the channel edit menu, select the shielded
program and press “Skip” (Blue) button, the skip mark at the left side of the
program disappears then program is recovered.
Off
BLIND SCAN
Search
EXIT
Return
Program Edit
9 Nine Digital
90 Nine Digital HD
99 Nine Guide
1BBC1
2C-04
3C-06
4C-08
5C-12
6C-23
7S-02
Delet e
Block
Skip
Fav
MENU
Info
Retur n
Move
Favorite(Yellow) button
This function can help store the favorite program then these programs can be
quickly selected.
1. Select the program which is favorite.
2. Press “Fav”(Yellow) Button, the favorite mark is displayed at the left side of
the program and this program is store into the Favorites.
3.To cancel the Favorite function, enter the program edit menu, select the
program and press “Fav”(Yellow) button, the favorite mark at the left side of the
program disappears.
Move (Info ) Button
This function can move channel.
LNB Setting
1. Press / key to choose "LNB Setting" item.
2. Press “OK” to display LNB Setting menu. You can set specific setting to search DVB-S channels.
Note: This option is only used in DVB-S mode.
31
Menu system instruction
Channel
DTV Manual Search
DTV Manual Search
Enter digital number and press “ENTER” to select DTV Channel.
DVBS Manual Search
1. Press / key to select the manual search option.
2. Press ENTER key to start search.
UHF CH 40
DTV
Radio
Data
0
0
0
Press ENTER to search
ATV Manual Search
1. Press / key to select "ATV Manual Search" option.
2. Press  or ENTER key to enter submenu.
Bad
Normal
Good
Return
Current CH
1. Press / key to select the second item.
2. Press / key to select current channel.
MENU
ENTER
Color System
Select ATV video system type function.
Satellite
Frequency
Symbol
Polarization
Network Search
Scan Mode
Service Type
Search
DTV Manual Search
System
Select ATV audio system type function.
Search
You can use  button to search channels from low frequency
to high frequency and use  button to search channels from
high frequency to low frequency. When you have searched a
channel, the searching will be paused and you can press it
again for other channels after you store the channel.
Fine-Tune
1. Press / key to select the third item.
2. Press / key to select a better frequency for current channel.
DTV
Radio
Search
Quanlity
Strength
Bad
0
0
Normal
Good
ATV Manual Search
Signal Information (Used only in DTV)
1. Press / key to select “Signal Information" option.
2. Press “ENTER”or  key ,you can see the information of the
DTV channel.
NOTE: Signal Quality/Signal Strength (DTV Only): Unlike
analogue channels, which can vary in reception quality, digital
channels must have perfect reception quality or you will not
receive them at all. So, unlike analogue channels, you are not
able fine tune a digital channel. If the signal strength indicates
that the signal is weak, a possible solution is to adjust your
antenna to increase the signal strength. Continue to adjust the
antenna until you find the best position with the strongest signal.
OPTUS_D1
0
0
Vertical Pos.
Off
Free
DTV+Radio
Current CH 1
Color System PAL
System BG
Search
Fine-Tune
Frequency 471.31 MHz
Save
MENU
Return
Channel 37
CI Information
1. Press / button to select “CI information”.
2. Press ENTER button, you can see specific CI information including
CI Module information, smart card information, etc.
Note: This option only used in DTV mode.
Name Nine Melbourne
Modulation DVBT
Quality 53
Strength 9
Sofeware Update (OAD)
Turn on or turn off OAD software ppdate function.
OAD SCAN
This option only used in DTV mode.
1. Press / button to select “OAD Scan” option.
2. Press ENTER button to search system software update file from DTV broadcast.
32
Network Setting
1.Press the “Menu” to enter, then pitch on the ”Option”,and press “ ENTER ”” or click the right button
to enter the submenu.
Picture
OSD Language
Sound
OSD Time
Function
Reset
Time
Network Configuration
Option
Software Upadate
Lock
Internet Update Check
Channel
Info
2.Pitch on the "Network Configuration",and press “ ENTER ” or click right button to enter the "Network
Configuration".
STATUS
WIFI
LAN
Network Configuration
IP
Netmask
Gateway
DHCP
169. 254. 018. 061
255. 255. 255. 000
Fail
172. 016. 088. 254
DNS
172. 016. 064. 058
Setting
3.When the wired network is used, if select dynamic IP address setting, pitch on the "DHCP" in
the "Network Configuration", then click the "Setting", and press the “ENTER” button to enter.
If select static IP address setting, pitch on the "Static" in the "Network configuration", then setting
up the IP, Nemask, Gateway and DNS in sequence. When the setting complete, pitch on the
"setting" and press the “ENTER”.
33
Network Setting
STATUS
WIFI
Network Configuration
IP
Netmask
Gateway
DNS
LAN
Static
172. 016. 067. 130
255. 255. 254. 000
172. 016. 066. 254
172. 016. 064. 081
Setting
4.If shows "Success", the "WLAN" on the bottom right corner will turn to green from red, and
it means the network connect successfully; If shows "Fail", it means the network can not connect,
please check whether the net wire and router connect successfully or not.
STATUS
WIFI
LAN
Network Configuration
IP
Netmask
Gateway
DHCP
169. 254. 018. 061
255. 255. 255. 000
Fail
172. 016. 088. 254
DNS
172. 016. 064. 058
Setting
5. Select the "WIFI" in the Network Configuration before using WIFI connecting.
STATUS
WIFI
LAN
Scan AP
SSID
Not Connected
Password
Network Configuration
DHCP
IP
Netmask
000. 000. 000. 000
Scanning...
Gateway
000. 000. 000. 000
DNS
000. 000. 000. 000
000. 000. 000. 000
Setting
34
Network Setting
Pitch on the "Setting", press the “ENTER” to confirm.
If shows "Success", the "WIFI" on the bottom right corner
will turn to green from red, and it means the network
connect successfully; If shows "Fail", it means the network
can not connect, please check whether the wireless router
connects successfully or not.
STATUS
WIFI
LAN
Scan AP
SSID
Not Connected
Password
Network Configuration
DHCP
IP
Netmask
Fail000. 000. 000. 000
Gateway
000. 000. 000. 000
DNS
000. 000. 000. 000
000. 000. 000. 000
Setting
35
Internet
Press “HOME” key to enter internet interface
1. NETFLIX
 Use arrow key to Select
button, then press “ENTER” key to enter NETFLIX.
Sign in
Get ready to watch thousands of TV shows and movies.
Enter your email address
1
q
2
3
4
8
9
e
r
t
6
y
7
w
u
i
o
a
s
d
f
g
h
j
k
l
x
c
v
b
n
m
z
5
0
p

Email address
@gmail .com @yhoo .com. tw @hotmail.com
!#$
@
Back
com
x
Next
Remem ber Email
Need help signing in? Visit http://help .netflix .com
 Use arrow button to select one video and press “ENTER” key to play.
Press “MENU” key to exit playing.
 Use arrow key to browse the pages. press “MENU” key to return to main menu and press
“EXIT” key to exit.
2. Youtube
 Use arrow key to Select
button, then press “ENTER” key to enter Youtube.
 Use arrow button to select one video and press “ENTER” key to play.
Press “MENU” key to exit playing.
 Press  key to open or close control menu when playing.
36
Internet
 Press  key to enter search interface, input the keyword and then press “OK” to search videos.
3.Twitter
 Use arrow key to Select
button, then press “ENTER” key to enter Twitter.
 Input the right Email and password, then select “Authorize app” button and press “ENTER”
key to log in.
 Use arrow key to browse the pages. press “MENU” key to return to main menu and
press “EXIT” key to exit twitter.
Red key: log in or log out twitter.
Green key: refresh current page.
Yellow key: write new tweet.
Blue key: Search tweet.
37
Internet
4.Facebook
 Use arrow key to Select
button, then press “ENTER” key to enter Facebook.
 Input the right Email and password,
select “log In” button, then press
“ENTER” key to log in.
 Press arrow key to browse the pages and press “ENTER” key to view.
Press “MENU” key to return the main menu.
Press “EXIT” key to exit Facebook.
Red key: log in or log out Facebook.
Green key: refresh current page.
5.Accuweather
 Use arrow key to Select
button, then press “ENTER” key to enter Accuweather.
 Input a city or zip code press select to get the weather information.
38
Internet
6.Screencast
Use arrow key to Select
button, then press “ENTER” key to enter Screencast.
39
Digital Media Player
Introduction
This TV is embedded with one USB port digital media player. It can find the devices support
USB1.1/2.0,including flash disk, USB hard disk and digital camera. It supports functions as:
Display pictures. Play music files, Play video files.
Notice:
1. In order to avoid affecting the user's viewing experience, please use the better quality and
shorter USB cable.
2. Play, preview some of the non-standard files may appear abnormal, please understand.
Explain:
1. Under the USB channel, you can use only the remote control.
2. Press INFO button to show play control menu when playing surface.
Data
Format
Picture
JPG, JPEG, PNG, BMP
Mp3
Music
MPG, MPEG, Mp4, MKV, MOV
Video
Remote Control Button
Description of Buttons:
INPUT
INFO
SUBTITLE
1
2
3
4
5
6
7
8
9
INFO
0
RECALL
SUBTITLE
HOME
Q.MENU
MENU
Buttons
Function
AUDIO
SUBTITLE
INFO
YELLOW
RED
CH ˄
CH ˅
Track switch (video)
Subtitle switch (video)
Show/Hide movie info (video)
AB Loop(Video)
Goto Time(Video)
Page up
Page down
Play/Pause
ENTER
ENTER
/LIST
BA CK /
GUID E
EX IT
Previous file
Next file
Backward
Forward
YELLOW
RED
Page up
VOL
AUDIO
CH
Page down
INDEX
HOLD
MIX
TEXT
SIZE
TIME
REVEAL
CANCEL
SUBCODE
Pg Dn
40
Troubleshooting
If you have any problem, check the couter measures for each symptom listed below. The following
symptoms may have been. caused by inappropriate adjustment rather than actual malfunction of
the unit. If the trouble persists, contact the Customer Care Centre, see back page for contact details.
Symptoms
Possible solutions
No power
Please check the power cord plugged in and that the power
outlet works.
Unplug the power cord and plug it in after 60 seconds and
restart the TV.
No picture
Please check antenna connection.
Station may be experiencing problems, please tune to
another station.
Please adjust the settings of contrast and brightness.
Good picture but no
sound
Please increase the volume.
Please check TV is under mute mode, press MUTE button
on the remote control.
Please check sound settings
If external devices are being used, check their volumes are
not set too low or turned off.
If using AVI or Component inputs, please make sure cables
are connected properly and not loose.
If using DVI to HDMI cable, a separate audio cable is required.
Make sure a headphone jack is not connected.
Good sound but abnormal
color or no picture
Please check antenna connection and antenna condition.
If using Component input, please check Component
connections, incorrect or loose connections may cause
colour problems or cause the screen to be blank.
No response to remote
control
Batteries of remote control may have exhausted, if
necessary, please change the batteries.
Clean the remote control lens. The distance between
LED TV and remote control should be within 8m, within
recommended operating angle and path is free of obstructions.
Full screen flickering
under VGA
V-HEIGHT value may be set too big, restart computer and
enter safe mode, then set monitor parameters to correct
value according to adjustment description.
Horizontal stripes
under VGA
Sample phase may be deflected, adjust phase according to
picture position.
Colored dots may be
present on the screen
Although the LED screen is made with high-precision
technology and 99.99% or more of the pixels are
effective, black dots may appear or bright points of light
(red, blue, or green) may appear constantly on the LED
screen. This is a structural property of the LED screen
and not a malfunction.
Picture is breaking up
Keep the TV away from noisy electrical sources such as cars,
hair dryers, welders, and all optional equipment.
Electrical atmospheric interference such as local or distant
lightning storms may cause picture to break up.
When installing optional equipment, leave some space
between the optional equipment and the TV.
Check the antenna and connection.
Keep the antenna away from any power or input/output cables.
41
Troubleshooting
After Auto Tuning only
some channels are
available
Check your area is covered by Digital Video Broadcasts.
Try re-tuning or manually tuning missing channels.
Check that you are using the correct antenna type.
Channel cannot be
selected
Check if the channel has been blocked in the main menu
settings.
USB not playing
Please check connecting USB cable and power supply is connected.
Hard drive has not been formatted. Please make sure USB disk is
compatible and the multimedia data formats are supported.
Picture is distorted,
macroblock, small block,
dots, pixelization, etc
Compression of video contents may cause distortion especially on
fast moving pictures such as sports and action movies.
Noise from speaker
Check cable connections, make sure a video cable is not connected
to an audio input.
Low signal level may cause sound distortion.
TV turns off automatically
Check if the Off Timer is set to On in the Setup menu.
Sleep Timer may have been enabled.
If there is no signal for about 10 minutes ( 2 minutes in VGA) from
an input, the TV will turn off.
If connected to your PC, check your PC power settings.
Make sure the AC power cord is plugged in securely to the wall
outlet and the TV.
TV turns on
automatically
Check if the On Timer is set to On in the Setup menu.
Picture is not shown in
full screen
Black bars on each side will be shown on HD channels when
displaying SD (4:3) contents.
Black bars on Top & Bottom will be shown on movies that have
aspect ratios different from your TV.
Adjust picture size option on your external device or TV to full screen.
WARNING
Never place a television set in an unstable location. A television set may fall, causing serious
personal injury or death. Many injuries, particularly to children, can be avoided by taking simple
precautions such as:
- Using cabinets or stands recommended by the manufacturer of the television set.
- Only using furniture that can safety support the television set.
- Ensuring the television set is not overhanging the edge of the supporting furniture.
- Not placing the television set on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and the television set to a suitable support.
- Not placing the television set on cloth or other materials that may be located
between the television set and supporting furniture.
- Educating children about the dangers of climbing on furniture to reach the television set or its
controls
If your existing television set is being retained and relocated, the same considerations as above
should be applied.
The plug or appliance coupler is used as the disconnect device, the disconnect device shall
remain readily operable.
42