SM-CEILING-CA
Strong™ Cathedral Ceiling Adapter for Ceiling Mounts with 1-1/2 in. NPT Threading (Black)
PARTS INCLUDED
(1) Cathedral Adapter Assembly
(3) #14 x 2.5” Lag Screws
(4) M5 x 5mm Set Screws
(2) Allen keys
TOOLS REQUIRED
Power Drill
3/16” Drill Bit
Stud Finder
INSTALLATION
Step 1: Use Ceiling Plate to mark holes in ceiling.
Step 2: Pre-drill 3 holes using 3/16” drill bit. Insert 3 Lag
Screws into holes through Ceiling Plate and tighten down.
Step 3: Thread extension pipe and tighten set screws
Lifetime Limited Warranty
Strong™ Mounts have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).
For Technical Support call 1.866.838.5052
