Digitus DS-55332 Quick Start Guide
The Digitus DS-55332 is a 4K HDMI switch that allows you to connect 5 signal sources to a single HDMI output. You can switch between these sources using the remote control, the device itself, or automatic recognition. The switch is powered via a Micro-USB cable, and it supports 4K resolution at 60Hz with HDR, HDCP 2.2, and Deep Color.
advertisement
▼
Scroll to page 2
of
8
4K HDMI Switch, 5x1 Quick Installation Guide DS-55332 1. Introduction The DIGITUS® 4K HDMI Switch, 5x1 offers additional HDMI connections for your output display – 5 signal sources can be connected using just 1 HDMI connection on the screen. The video changeover switch is supplied with power via the Micro USB cable, e.g. via the source device or a USB charging adapter. Switch conveniently between the signal sources via remote control, on the device itself or via automatic recognition. Perfectly suited for use with wall installation of TV - only a HDMI cable is required to connect the sources. 2. Main Features • • • • • • • • • • Switch conveniently between 5 signal sources via remote control, on the device itself or via automatic recognition Additional HDMI connections for your output device – 5 signal sources via just 1 HDMI connection/cable on the screen Power supply via Micro USB cable (included) Max. resolution: 4K/60Hz Video bandwidth: 18 Gbps Supports High Dynamic Range (HDR) Supports HDCP 2.2 Supports Consumer Electronics Control Supports Deep Color (36-bit) HDMI 2.0 3. Package Content • • • • 1x HDMI Switch 1x remote control (2x AAA batteries, not included) 1x Micro USB cable (0,7 m) 1x QIG 2 4. Technical Features Specs Description Video Inputs 5x HDMI Video Output 1x HDMI Vertical Frequency Range 50/60Hz Video Bandwidth 6.0 Gbps / 600MHz per channel, 18 Gbps all channels Interlaced Resolutions 480i, 576i, 1080i Progressive Resolutions 480p, 576p, 720p, 1080p, 4K@24/30Hz, 4k@50/60Hz Operating Temperature 0℃ to 70℃ Storage Humidity 5% to 90% RH non-condensation Power Supply Micro USB cable Power Consumption (Max) 5W Dimension (LxWxH) 160 x 62 x 14.2mm Net Weight 214 g Material Metal 3 5. Panel Description 1. Power: Pressing to turn on/off the switcher 2. 1-5: Pressing the number to select the input source accordingly 3. 4. DC/5V: DC 5V Input via Micro USB port 9. OUTPUT: HDMI Output - - 4 IR Mode LED Indicator: ON: IR receiver mode activated OFF: IR function deactivated 5. INPUT 1-5: HDMI Input 6. - Power LED Indicator: Red LED indicates: “Standby mode” Blue LED indicates: “Working mode” No LED indicates: “No Power supply connected” - 7. 8. - 10. IR: IR signal receiver port 11. Select button: Short press to change the input channel; and long press the selector button till 3 seconds to change the manual switching or automatic switching mode 1/2/3/4/5: Input Port 1/2/3/4/5 LED Indicators Blue LED indicates: “Active input signal” No LED indicates: “No input signal” Auto Mode LED Indicator: ON: is in Automatic Switching mode OFF: is in Manual Switching mode 5 - Auto mode LED indicator: on for automatic switching mode and off for manual switching mode - Turn on/off the IR receiver mode: if long press the selector button for 6 seconds to turn on/off the IR receiver mode 6. Connection Diagram 6 7. Troubleshooting Problems Power light is off and product is not working Roots No power supply connected No signal output on the screen The HDMI cable may not comply with the HDMI 2.0 specification or is maybe too long The remote control is not working The cover between the battery and the remote control may not have been removed or the IR receiver function and the IR receiver display may be switched off 7 Solutions Please connect the micro USB cable and connect it to the signal source or, if necessary, to a USB charging adapter via a socket Please use at least a High Speed HDMI 2.0 cable that does not exceed the maximum length of the input/output cable of 5 m for 4K/60Hz (4:4:4) or 10 m for 4K@30Hz / 1080p Please remove the plastic parts first and check whether the IR receiver indicator is switched on or not. You can change the status by pressing the remote control button or by pressing and holding the toggle button for 6s to turn on the IR receiver function Disclaimer Hereby ASSMANN Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address. www.assmann.com Assmann Electronic GmbH Auf dem Schüffel 3 58513 Lüdenscheid Germany 8
advertisement
Key Features
- 5 Input HDMI
- 1 Output HDMI
- 4K 60Hz
- HDR Support
- Remote Control
- Auto Switching
- Micro USB Power
- HDCP 2.2
- Deep Color
Frequently Answers and Questions
How many HDMI inputs does the Digitus DS-55332 have?
The Digitus DS-55332 has 5 HDMI inputs.
What is the maximum resolution supported by the Digitus DS-55332?
The Digitus DS-55332 supports a maximum resolution of 4K at 60Hz.
Does the Digitus DS-55332 support HDR?
Yes, the Digitus DS-55332 supports High Dynamic Range (HDR).
How do I switch between inputs on the Digitus DS-55332?
You can switch between inputs using the remote control, the buttons on the device itself, or automatic recognition.
How is the Digitus DS-55332 powered?
The Digitus DS-55332 is powered via a Micro USB cable.
Related manuals
Download
PDF
advertisement