Soundmax SM-CSM403 Owner Manual

SM-CSM403

10 cm 3-way coaxial acoustic system

Instruction manual

10 3 -

Description

The set of acoustic system includes:

- acoustic system

- metal grill – 2 pcs

- speaker wire – 3 m

- screw – 8 pcs

- clip – 8 pcs

2 m (x 8) (x 8)

Important safeguards

The owner’s manual contains important operating and maintenance instructions for your safety. It is necessary to refer the manual.

Do not install the speakers where they may be subjected to excessive heat, moisture, dust or where they will be kicked repeatedly, brushed or bumped.

Before mounting and connecting the wires be sure that wire of the negative pole terminal is disconnected from accumulator. Nonobservance of this demand may cause the short circuit or fire.

To prevent short circuit never put or leave any metal objects (e.g. coins or metal tools) inside the acoustic system.

2

Make absolutely sure that the terminals for the speakers are connected to the proper outputs from the music source.

Never run the wiring on the outside of the vehicle or under it where it can be damaged by road hazards or the moving parts of the vehicle. Use existing wire channels, sills, panels and molding strips inside the vehicle to hide the wiring for safety and a neat appliance.

Make sure the wire of the negative pole terminal is disconnected from accumulator while connecting the speaker terminals. Turn on the various components and slowly increase the volume. Remember to check and re-check all connections to ensure proper installation and use.

Do not continuously use the speaker system beyond the nominal power handling capacity.

Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the speaker system to protect them from damage caused by the magnets in the speakers.

If you cannot find the appropriate mounting location, consult your car dealer or your nearest dealer before mounting.

CAUTION: Take extreme caution when working near the gas tank, gas lines, brake or hydraulic lines and electrical wiring.

Mounting the speakers

Installation kits are available from your dealer or local stereo shop to help make your installation easy. These kits also give your installation a clean, custom appearance. In case you have any questions about installations methods please consult a professional auto sound dealer/installer for assistance.

Choose the place of installation for acoustic system. For most acoustic system stipulated regular places in the automobile approach. In this case you need to know only assembly depth. Before installation acoustic system check up their assembly depth.

At a choice of a non-standard arrangement of speakers at which it is necessary to cut them in panels of the automobile, use a mould (not included). For achievement of ideal arrangement of acoustic system keep up geometry of a mould, as it is very important for correct installation of your system ( mm).

=102 mm, Ø =5

3

If it will be necessary to cut steel, reinstall the cosmetic panel in place and use the hole you have previously cut as a template. This will help you ensure proper cutting and a good fit. Now, mark the locations for the speakers mounting screws, remove the panel and drill the screw holes. When finished, you may replace the panel.

After cutting and drilling all holes, inspect the mounting areas for any metal burrs or rough edges. File any area that may interfere with the mounting of the speaker.

Clean any metal shavings from the mounting area and check for areas in which water may enter the speaker cavity. Treat the area for water protection when necessary.

Securing the speakers

Position the speaker into the mounting hole and re-confirm the correct mounting location and hole placement.

Screw clips are provided to ensure a snug fit. These should be placed over the metal surface and line up the hole you have previously drilled with the screw clip. Place the speaker into the hole, align the holes and proceed to insert the screws. Be sure to tighten the screws evenly so that they will not warp the speaker frame.

4

Turn your system on and confirm the speakers operation first at a low volume and then you may increase the volume as you desire.

After installation of the acoustic system and having tested it the speaker grill will have to be inserted. Turn on you system and follow these steps carefully:

- locate the speaker grill;

- now carefully inspect the place where the speaker grill will be mounted – there should be no blowholes;

- fix the speaker grill with screws.

5

If unit fails to operate properly

Carefully read the instruction to make sure the unit is being operated properly. Check the following before you take your unit to the local dealer for repair.

SYMPTOM

No sound

Unnatural sound

POSSIBLE CAUSE SOLUTION

The volume control regulator set in the minimal position

Adjust sound level

Bad power connections

The audio cassette receiver is damaged

Check to see that all the power and speaker leads are securely connected

Take your unit to the local dealer for repair

Acoustic system cables are connected without observance of polarity (+ or -)

Check to see that all the power and speaker leads are securely connected

Damage speaker wire or speaker Replace the speaker or speaker wires

The audio cassette receiver is damaged

Take your unit to the local dealer for repair

6

Specification

Loudspeaker one

Magnet

Peak output power

Rated output power

Impedance

Sensitivity

Frequency response

Dimensions woofer: 10 cm (4”) carbon compound kevlar woven midrange: 30 mm mylar tweeter: 15 mm piezo main: ferrite 8 Oz midrange: ferrite tweeter: ferrite

100 W

50 W

4 hm

91 dB

80-20000 Hz

133.5 x 65.5 mm

Net/Gross weight 0.56kg / 1.3kg

Gift box dimension (L x H x W) 306 mm 158 mm 78 mm

7

2 (x 8) ( 8)

8

-

-

-

-

-

–2 .

– 3

– 8 .

– 8 .

:

.

,

.

,

,

.

,

,

,

.

,

.

.

.

(

,

,

.

,

.

:

)

(-)

.

.

.

,

,

,

,

,

,

.

,

(-)

,

.

.

,

,

.

9

.

.

,

,

(

(

.

.

.

.

,

,

=102 , Ø =5 ).

).

,

-

-

-

-

.

,

.

;

,

,

;

.

10

:

,

;

.

,

.

,

,

.

.

,

-

-

-

;

11

.

.

:

,

;

.

.

,

,

(+ -)

.

.

,

12

( x x )

: 10 (4”)

: 30 (1,2”)

: 15

:

(226,8

:

:

)

100

50

4

91

80-20000

133,5 x 65,5

0,56 / 1,3

306 158 78

8

13