Height Adjustable Ceiling Mount for Monitors and TVs
ADD-HACMMT
INSTALLATION - MANUAL
CONTENTS:
A
C
B
E
x4
x4
1/4’’
14#x2’’
x2
x1
1/4’’x2’’
x4
G
D
F
x4
x2
x1
M4x10
x2
J
H
INSTALLATION:
1A. Mounting to Drywall Ceiling:
A
x4
1/4’’
1B. Mounting to Concrete Ceiling:
B
C
x4
x4
14#x2’’
1/4’’x2’’
1A. Place the canopy (A) of the
mount to the desired location
on the ceiling. Using a
screwdriver (not included), and
components (A and B) - set up
the canopy to the ceiling until
securely tightened.
1A. Place the canopy (A) of the
mount to the desired location
on the ceiling. Using a
screwdriver (not included), and
component (C) - set up the
canopy to the ceiling until
securely tightened.
2. Attaching VESA Compatible Device:
D
x4
M4x10
2A. To attach a compatible VESA device, align the holes of
the device to the wall mounts VESA plate. Then, insert
screws (D) through the back of the mounting plate, then
rotate using the inlcuded allen key tool (E).
3. Setting Up Cable Management:
4A. Connect cables from your TV into the pole body
as illustrated. Continue wiring through the body until
the cable comes out from the hidden cutout in the
ceiling into whatever connection is made (by others).
4B. Once all the wiring has been routed, use the
end cap and canopy for a clean and organized
seamless look. Click together the two pieces (G)
and insert them in the bottom end as shown.
4C. Take the canopy cover pieces (H) and
place them over the mounting base by
clamping them together as shown above.
Height Adjustability
Tilt Adjustability
Turn screw with allen key (E) to loosen, then
extend or retract pole to adjust to the desired
height. Turn pole knob clockwise to tighten.
Turn bolt with wrench (F) to loosen connection,
allowing adjusting ease of tilting in the VESA
plate. Turn it clockwise to tighten the connection.
">
