Boompods EL221 Anc Echobuds User Guide

For First-Time Use:
1. Open the charging case.
2. Remove the earbuds.
3. The buds will automatically pair together and enter the
pairing stage.
4. Turn on Bluetooth on your pairing device (phone).
5. Select "ECHOBUDS ANC" from the list of available devices.
6. Wait for the connected confirmation.
Note: After you have completed these steps, the earbuds
will automatically connect to your device the next time.
In pairing mode If not connected after 10 mins earbuds
will power down.
echobuds
ANC
EL221
The recycled material used to make this product may
have traces of the wide mix of types of plastics collected,
this can allow some minor black spots and imperfections
to appear upon the surface. These are normal and do not
affect the performance of the product.
ECHOBUDS ANC
charge case LED
Blinking green LED case needs charging.
use provided USBC charing cable.
x
In the unlikely case of any pairing problem
1. Remove from phone bluetooth menu.
2. Press 6 times both earbuds at the same time.
3. now re-pair to your phone like for the fist time.
Product Name: ECHOBUDS ANC
Input: DC 5V = 70mA fast charge
Material: R-ABS
Charging case input: DCSV = 1A
Bluetooth version: V5.3
Charging time: 1.5h
Noise reduction: ANC-ENC
Frequency response range: 20Hz-- 20KHz
Communication distance: 10m
Charging interface: Type-C
Standby time: about 350h
Product weight: 28.28
Playing time: about 6 h volume (60%)
Earbud battery: 40mAh/ 3.7V
Total playback time: 26h
Charging case battery: 300 mAh / 3.7V
Product size: 5.9*4.6*2.6 (cm)
The Declaration of Conformity can be found at:
https://www.boompods.com/product/echobudsANC
Hereby, Boompods declares that the radio equipment type
[Earphone with Bluetooth] is in compliance with Directive 2014/53/EU.
FCC ID: 2A36Q-EchoANC